Hi zusammen,

ich habe meinen Rock64 neu aufgesetzt und nun das problem, dass ich einige Adapter nicht installieren kann.

Folgende Konstellation:

Rock 64 mit Debian Stretch

NPM 6.4.1

Node 8.12.0

Git ist installiert und libcap-dev auch. Folgende Fehlermeldung bekomme ich immer (am Beispiel des Yahia Adapters):

! $ ./iobroker add yahka
! NPM version: 6.4.1
! npm install iobroker.yahka –production --save --prefix "/opt/iobroker" (System call)
! Traceback (most recent call last): File "/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py", line 13, in <module>import gyp File "/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/pylib/gyp/init.py", line 8, in <module>import gyp.input
! File "/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 5, in <module>from compiler.ast import Const
! ImportError: No module named compiler.ast
! gyp
! ERR! configure error
! gyp
! ERR! stack Error: gyp failed with exit code: 1gyp ERR! stack at ChildProcess.onCpExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:345:16)
! gyp ERR! stack at emitTwo (events.js:126:13)
! gyp ERR! stack
! at ChildProcess.emit (events.js:214:7)gyp
! ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:198:12)gyp
! ERR! System Linux 4.4.132-1075-rockchip-ayufan-ga83beded8524gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
! gyp
! ERR! cwd /opt/iobroker/node_modules/curve25519-ngyp ERR! node -v v8.12.0
! gyp ERR! node-gyp -v
! v3.8.0gyp ERR! not ok
! npm
! ERR! code ELIFECYCLEnpm
! ERR! errno 1
! npm
! ERR! curve25519-n@1.4.0 install: node-gyp rebuildnpm ERR! Exit status 1
! npm
! ERR! npm ERR! Failed at the curve25519-n@1.4.0 install script.
! npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
! npm ERR! A complete log of this run can be found in:npm ERR! /root/.npm/_logs/2018-09-21T21_13_44_713Z-debug.log
! host.rock64 install adapter yahka
! NPM version: 6.4.1
! npm install iobroker.yahka --production --save --prefix "/opt/iobroker" (System call)
! Traceback (most recent call last): File "/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py", line 13, in <module>import gyp File "/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/pylib/gyp/init.py", line 8, in <module>import gyp.input
! File "/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 5, in <module>from compiler.ast import Const
! ImportError: No module named compiler.ast
! gyp
! ERR!
! configure error
! gyp ERR!
! stack Error: gyp failed with exit code: 1gyp ERR! stack at ChildProcess.onCpExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:345:16)
! gyp ERR! stack at emitTwo (events.js:126:13)
! gyp ERR! stack at ChildProcess.emit (events.js:214:7)
! gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:198:12)
! gyp ERR! System Linux 4.4.132-1075-rockchip-ayufan-ga83beded8524gyp ERR!
! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
! gyp
! ERR! cwd /opt/iobroker/node_modules/curve25519-ngyp ERR! node -v v8.12.0
! gyp ERR! node-gyp -v v3.8.0
! gyp ERR! not ok
! npm
! ERR! code ELIFECYCLEnpm ERR!
! errno 1
! npm
! ERR! curve25519-n@1.4.0 install: node-gyp rebuildnpm ERR! Exit status 1
! npm ERR! npm ERR! Failed at the curve25519-n@1.4.0 install script.
! npm ERR!
! This is probably not a problem with npm. There is likely additional logging output above.
! npm ERR! A complete log of this run can be found in:npm ERR! /root/.npm/_logs/2018-09-21T21_14_23_302Z-debug.log
! host.rock64 install adapter yahka
! NPM version: 6.4.1
! npm install iobroker.yahka --production --save --prefix "/opt/iobroker" (System call)
! Traceback (most recent call last): File "/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py", line 13, in <module>import gyp File "/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/pylib/gyp/init.py", line 8, in <module>import gyp.input
! File "/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 5, in <module>from compiler.ast import Const
! ImportError: No module named compiler.ast
! gyp
! ERR!
! configure error
! gyp ERR! stack
! Error: gyp failed with exit code: 1gyp ERR! stack at ChildProcess.onCpExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:345:16)
! gyp ERR! stack at emitTwo (events.js:126:13)
! gyp ERR! stack at ChildProcess.emit (events.js:214:7)
! gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:198:12)
! gyp ERR! System Linux 4.4.132-1075-rockchip-ayufan-ga83beded8524gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
! gyp ERR! cwd /opt/iobroker/node_modules/curve25519-n
! gyp ERR! node -v v8.12.0
! gyp ERR! node-gyp -v v3.8.0
! gyp ERR! not ok
! npm
! ERR! code ELIFECYCLEnpm
! ERR! errno 1
! npm
! ERR! curve25519-n@1.4.0 install: node-gyp rebuildnpm ERR! Exit status 1
! npm
! ERR! npm ERR! Failed at the curve25519-n@1.4.0 install script.
! npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
! npm ERR! A complete log of this run can be found in:npm ERR! /root/.npm/_logs/2018-09-21T21_15_01_667Z-debug.log
! host.rock64 install adapter yahka
! ERROR: host.rock64 Cannot install yahka
! ERROR: process exited with code 13</module></module></module></module></module></module></module></module></module>

und einen gleichen Fehler auch beim Amazon Dash Adapter, hier hatte ich es als root in der console direkt probiert:

! root@rock64:~# iobroker add amazon-dash 1
! NPM version: 6.4.1
! npm install iobroker.amazon-dash –production --save --prefix "/opt/iobroker" (System call)
! Traceback (most recent call last):
! File "/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py", line 13, in <module>import gyp
! File "/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/pylib/gyp/init.py", line 8, in <module>import gyp.input
! File "/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 5, in <module>from compiler.ast import Const
! ImportError: No module named compiler.ast
! gyp ERR! configure error
! gyp ERR! stack Error: gyp failed with exit code: 1
! gyp ERR! stack at ChildProcess.onCpExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:345:16)
! gyp ERR! stack at emitTwo (events.js:126:13)
! gyp ERR! stack at ChildProcess.emit (events.js:214:7)
! gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:198:12)
! gyp ERR! System Linux 4.4.132-1075-rockchip-ayufan-ga83beded8524
! gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
! gyp ERR! cwd /opt/iobroker/node_modules/socketwatcher
! gyp ERR! node -v v8.12.0
! gyp ERR! node-gyp -v v3.8.0
! gyp ERR! not ok
! npm ERR! code ELIFECYCLE
! npm ERR! errno 1
! npm ERR! socketwatcher@0.3.0 install: node-gyp rebuild
! npm ERR! Exit status 1
! npm ERR!
! npm ERR! Failed at the socketwatcher@0.3.0 install script.
! npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
! npm ERR! A complete log of this run can be found in:
! npm ERR! /root/.npm/_logs/2018-09-21T20_59_54_852Z-debug.log
! host.rock64 install adapter amazon-dash
! NPM version: 6.4.1
! npm install iobroker.amazon-dash --production --save --prefix "/opt/iobroker" (System call)
! Traceback (most recent call last):
! File "/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py", line 13, in <module>import gyp
! File "/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/pylib/gyp/init.py", line 8, in <module>import gyp.input
! File "/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 5, in <module>from compiler.ast import Const
! ImportError: No module named compiler.ast
! gyp ERR! configure error
! gyp ERR! stack Error: gyp failed with exit code: 1
! gyp ERR! stack at ChildProcess.onCpExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:345:16)
! gyp ERR! stack at emitTwo (events.js:126:13)
! gyp ERR! stack at ChildProcess.emit (events.js:214:7)
! gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:198:12)
! gyp ERR! System Linux 4.4.132-1075-rockchip-ayufan-ga83beded8524
! gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
! gyp ERR! cwd /opt/iobroker/node_modules/socketwatcher
! gyp ERR! node -v v8.12.0
! gyp ERR! node-gyp -v v3.8.0
! gyp ERR! not ok
! npm ERR! code ELIFECYCLE
! npm ERR! errno 1
! npm ERR! socketwatcher@0.3.0 install: node-gyp rebuild
! npm ERR! Exit status 1
! npm ERR!
! npm ERR! Failed at the socketwatcher@0.3.0 install script.
! npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
! npm ERR! A complete log of this run can be found in:
! npm ERR! /root/.npm/_logs/2018-09-21T21_00_40_020Z-debug.log
! host.rock64 install adapter amazon-dash
! NPM version: 6.4.1
! npm install iobroker.amazon-dash --production --save --prefix "/opt/iobroker" (System call)
! Traceback (most recent call last):
! File "/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py", line 13, in <module>import gyp
! File "/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/pylib/gyp/init.py", line 8, in <module>import gyp.input
! File "/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 5, in <module>from compiler.ast import Const
! ImportError: No module named compiler.ast
! gyp ERR! configure error
! gyp ERR! stack Error: gyp failed with exit code: 1
! gyp ERR! stack at ChildProcess.onCpExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:345:16)
! gyp ERR! stack at emitTwo (events.js:126:13)
! gyp ERR! stack at ChildProcess.emit (events.js:214:7)
! gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:198:12)
! gyp ERR! System Linux 4.4.132-1075-rockchip-ayufan-ga83beded8524
! gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
! gyp ERR! cwd /opt/iobroker/node_modules/socketwatcher
! gyp ERR! node -v v8.12.0
! gyp ERR! node-gyp -v v3.8.0
! gyp ERR! not ok
! npm ERR! code ELIFECYCLE
! npm ERR! errno 1
! npm ERR! socketwatcher@0.3.0 install: node-gyp rebuild
! npm ERR! Exit status 1
! npm ERR!
! npm ERR! Failed at the socketwatcher@0.3.0 install script.
! npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
! npm ERR! A complete log of this run can be found in:
! npm ERR! /root/.npm/_logs/2018-09-21T21_01_26_521Z-debug.log
! host.rock64 install adapter amazon-dash
! host.rock64 Cannot install amazon-dash</module></module></module></module></module></module></module></module></module>

Jemand eine Idee woran das liegen könnte? Hab ich noch was vergessen zu installieren?

Danke vorab!

Viele Grüße

Walkinlarge

Danke, das hat geholfen!

Gesendet von iPad mit Tapatalk