- ioBroker Community Home
- Deutsch
- Error/Bug
- BLE-Adapter empfängt keine Daten
NEWS
BLE-Adapter empfängt keine Daten
This topic has been deleted. Only users with topic management privileges can see it.
-
- Adaptername: BLE
- Adapterversion: 0.14.0
- js-controller Version: 6.0.11
- Admin Version: v7.1.5
- Hardwaresystem: Pi4
- Arbeitsspeicher: 4GB
- Festplattenart: SSD
- Node.js: v18.17.1
- NPM-Version: 9.6.7
Hallo,
Nach langer Zeit habe ich heute mal wieder versuchte mit dem BLE-Adapter irgendein Gerät zu finden. Der Adapter wird grün, aber unter Objekte tut sich nichts - es werden keine Geräte gefunden.
Die Voraussetzungen für den Adapter (https://github.com/AlCalzone/ioBroker.ble) sind erfüllt. DriverState sagt "PoweredOn". Ich nutze den Chip des Raspberrys - keinen externen.Ich habe hier und in anderen Threads schon gelesen, aber nichts gefunden, was mir hilft.
rfkill sagt:
rfkill ID TYPE DEVICE SOFT HARD 0 wlan phy0 unblocked unblocked 1 bluetooth hci0 unblocked unblockedhciconfig sagt
hciconfig hci0: Type: Primary Bus: UART BD Address: E4:5F:01:4B:4B:CC ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING RX bytes:1548 acl:0 sco:0 events:94 errors:0 TX bytes:2564 acl:0 sco:0 commands:94 errors:0dmesg -T | grep -i bluetooth sagt:
dmesg -T | grep -i bluetooth [Fri Oct 4 11:20:44 2024] Bluetooth: Core ver 2.22 [Fri Oct 4 11:20:44 2024] NET: Registered PF_BLUETOOTH protocol family [Fri Oct 4 11:20:44 2024] Bluetooth: HCI device and connection manager initialized [Fri Oct 4 11:20:44 2024] Bluetooth: HCI socket layer initialized [Fri Oct 4 11:20:44 2024] Bluetooth: L2CAP socket layer initialized [Fri Oct 4 11:20:44 2024] Bluetooth: SCO socket layer initialized [Fri Oct 4 11:20:44 2024] Bluetooth: HCI UART driver ver 2.3 [Fri Oct 4 11:20:44 2024] Bluetooth: HCI UART protocol H4 registered [Fri Oct 4 11:20:44 2024] Bluetooth: HCI UART protocol Three-wire (H5) registered [Fri Oct 4 11:20:44 2024] Bluetooth: HCI UART protocol Broadcom registered [Fri Oct 4 11:20:44 2024] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [Fri Oct 4 11:20:44 2024] Bluetooth: BNEP filters: protocol multicast [Fri Oct 4 11:20:44 2024] Bluetooth: BNEP socket layer initialized [Fri Oct 4 11:20:44 2024] Bluetooth: MGMT ver 1.22Adapter-Einstellungen sollten korrekt sein:
- Überwachte Dienste : *
- neue Geräte akzeptiert
- Geräte ohne gesendete Daten erlaubt
- hci0
Log beim Start:
ble.0 2024-10-04 11:32:30.305 info starting scan for services [] ble.0 2024-10-04 11:32:29.508 info starting scanner process... ble.0 2024-10-04 11:32:29.433 info monitoring all services ble.0 2024-10-04 11:32:29.432 info enabled plugins: _default ble.0 2024-10-04 11:32:29.430 info loaded plugins: Xiaomi, mi-flora, ruuvi-tag, BTHome, _default ble.0 2024-10-04 11:32:29.328 info starting. Version 0.14.0 in /opt/iobroker/node_modules/iobroker.ble, node: v18.17.1, js-controller: 6.0.11 ble.0 2024-10-04 11:32:21.024 info terminating ble.0 2024-10-04 11:32:20.520 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason ble.0 2024-10-04 11:32:20.517 info terminating ble.0 2024-10-04 11:32:20.505 info Got terminate signal TERMINATE_YOURSELFHat noch jemand eine Idee?
-
- Adaptername: BLE
- Adapterversion: 0.14.0
- js-controller Version: 6.0.11
- Admin Version: v7.1.5
- Hardwaresystem: Pi4
- Arbeitsspeicher: 4GB
- Festplattenart: SSD
- Node.js: v18.17.1
- NPM-Version: 9.6.7
Hallo,
Nach langer Zeit habe ich heute mal wieder versuchte mit dem BLE-Adapter irgendein Gerät zu finden. Der Adapter wird grün, aber unter Objekte tut sich nichts - es werden keine Geräte gefunden.
Die Voraussetzungen für den Adapter (https://github.com/AlCalzone/ioBroker.ble) sind erfüllt. DriverState sagt "PoweredOn". Ich nutze den Chip des Raspberrys - keinen externen.Ich habe hier und in anderen Threads schon gelesen, aber nichts gefunden, was mir hilft.
rfkill sagt:
rfkill ID TYPE DEVICE SOFT HARD 0 wlan phy0 unblocked unblocked 1 bluetooth hci0 unblocked unblockedhciconfig sagt
hciconfig hci0: Type: Primary Bus: UART BD Address: E4:5F:01:4B:4B:CC ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING RX bytes:1548 acl:0 sco:0 events:94 errors:0 TX bytes:2564 acl:0 sco:0 commands:94 errors:0dmesg -T | grep -i bluetooth sagt:
dmesg -T | grep -i bluetooth [Fri Oct 4 11:20:44 2024] Bluetooth: Core ver 2.22 [Fri Oct 4 11:20:44 2024] NET: Registered PF_BLUETOOTH protocol family [Fri Oct 4 11:20:44 2024] Bluetooth: HCI device and connection manager initialized [Fri Oct 4 11:20:44 2024] Bluetooth: HCI socket layer initialized [Fri Oct 4 11:20:44 2024] Bluetooth: L2CAP socket layer initialized [Fri Oct 4 11:20:44 2024] Bluetooth: SCO socket layer initialized [Fri Oct 4 11:20:44 2024] Bluetooth: HCI UART driver ver 2.3 [Fri Oct 4 11:20:44 2024] Bluetooth: HCI UART protocol H4 registered [Fri Oct 4 11:20:44 2024] Bluetooth: HCI UART protocol Three-wire (H5) registered [Fri Oct 4 11:20:44 2024] Bluetooth: HCI UART protocol Broadcom registered [Fri Oct 4 11:20:44 2024] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [Fri Oct 4 11:20:44 2024] Bluetooth: BNEP filters: protocol multicast [Fri Oct 4 11:20:44 2024] Bluetooth: BNEP socket layer initialized [Fri Oct 4 11:20:44 2024] Bluetooth: MGMT ver 1.22Adapter-Einstellungen sollten korrekt sein:
- Überwachte Dienste : *
- neue Geräte akzeptiert
- Geräte ohne gesendete Daten erlaubt
- hci0
Log beim Start:
ble.0 2024-10-04 11:32:30.305 info starting scan for services [] ble.0 2024-10-04 11:32:29.508 info starting scanner process... ble.0 2024-10-04 11:32:29.433 info monitoring all services ble.0 2024-10-04 11:32:29.432 info enabled plugins: _default ble.0 2024-10-04 11:32:29.430 info loaded plugins: Xiaomi, mi-flora, ruuvi-tag, BTHome, _default ble.0 2024-10-04 11:32:29.328 info starting. Version 0.14.0 in /opt/iobroker/node_modules/iobroker.ble, node: v18.17.1, js-controller: 6.0.11 ble.0 2024-10-04 11:32:21.024 info terminating ble.0 2024-10-04 11:32:20.520 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason ble.0 2024-10-04 11:32:20.517 info terminating ble.0 2024-10-04 11:32:20.505 info Got terminate signal TERMINATE_YOURSELFHat noch jemand eine Idee?
@dan_ce sagte in BLE-Adapter empfängt keine Daten:
Hat noch jemand eine Idee?
Ja. Grundsätzlich das ganze System auf Stand bringen. node v18.17.1 sagt mir, dass das schon länger nicht mehr getan wurde.
iob stop iob fix iob nodejs-update -
@dan_ce sagte in BLE-Adapter empfängt keine Daten:
Hat noch jemand eine Idee?
Ja. Grundsätzlich das ganze System auf Stand bringen. node v18.17.1 sagt mir, dass das schon länger nicht mehr getan wurde.
iob stop iob fix iob nodejs-update@thomas-braun Manchmal sind es die naheliegenden Dinge.... Hat geholfen. Danke!
-
@thomas-braun Manchmal sind es die naheliegenden Dinge.... Hat geholfen. Danke!
-
@thomas-braun said in BLE-Adapter empfängt keine Daten:
iob diag
Ich sehe keine Auffälligkeiten:
======== Start marking the full check here ========= ```bash Skript v.2024-08-12 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 OS is similar to: debian Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : 32 bit Systemuptime and Load: 16:36:17 up 5:15, 1 user, load average: 1.18, 0.98, 0.94 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Fri 2024-10-04 16:36:17 CEST Universal time: Fri 2024-10-04 14:36:17 UTC RTC time: n/a Time zone: Europe/Luxembourg (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.7G 201M 0.0K 1.9G 2.1G Swap: 99M 0B 99M Total: 3.9G 1.7G 301M Active iob-Instances: 25 3793 M total memory 1678 M used memory 2651 M active memory 579 M inactive memory 201 M free memory 154 M buffer memory 1759 M swap cache 99 M total swap 0 M used swap 99 M free swap *** top - Table Of Processes *** top - 16:36:18 up 5:15, 1 user, load average: 1.18, 0.98, 0.94 Tasks: 171 total, 3 running, 168 sleeping, 0 stopped, 0 zombie %Cpu(s): 18.1 us, 13.9 sy, 0.0 ni, 65.3 id, 0.0 wa, 0.0 hi, 2.8 si, 0.0 st MiB Mem : 3793.3 total, 200.7 free, 1678.4 used, 1914.2 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 2093.3 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * dhcpcd.service loaded failed failed DHCP Client Daemon LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 118G 67G 46G 60% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 776K 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/sda1 vfat 253M 51M 202M 20% /boot tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri Oct 4 11:20:28 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:4B:4B:CA vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=c8310538-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [Fri Oct 4 11:20:30 2024] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Oct 4 11:20:30 2024] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Fri Oct 4 11:20:32 2024] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 7.2G /var/ 5.3G /var/log 3.8G /var/log/journal/15bf1d53440e420dbea5e0eb6f8b1ed5 3.8G /var/log/journal 1.1G /var/cache Archived and active journals take up 3.7G in the file system. /opt/iobroker/backups: 51G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 971M /opt/iobroker/iobroker-data/ 701M /opt/iobroker/iobroker-data/files 441M /opt/iobroker/iobroker-data/files/javascript.admin 409M /opt/iobroker/iobroker-data/files/javascript.admin/static 408M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 75M /opt/iobroker/iobroker-data/states.jsonl 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 26M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 24M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/main.c9369f6c.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2439935-if00 *** NodeJS-Installation *** /usr/bin/nodejs v20.17.0 /usr/bin/node v20.17.0 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.3 nodejs: Installed: 20.17.0-1nodesource1 Candidate: 20.17.0-1nodesource1 Version table: *** 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 12.22.12~dfsg-1~deb11u5 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages 500 https://archive.raspbian.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 6.0.11 admin: 7.1.5 javascript: 8.7.6 nodejs modules from github: 2 +-- homebridge-blink-for-home@3.9.2 (git+ssh://git@github.com/zidge/homebridge-blink-for-home.git#edf600439f6bbd9a1cbf5e4ca9e676e6bdbff6d2) +-- iobroker.ham@5.3.1 (git+ssh://git@github.com/ioBroker/ioBroker.ham.git#009af26ad98bea3a0783c4d0bd19a1a3c3eeb92c) Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled system.adapter.alias-manager.0 : alias-manager : raspberrypi - enabled system.adapter.awtrix-light.0 : awtrix-light : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.ble.0 : ble : raspberrypi - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled + system.adapter.deconz.0 : deconz : raspberrypi - enabled, port: 80 + system.adapter.device-watcher.0 : device-watcher : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.email.0 : email : raspberrypi - enabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : raspberrypi - enabled + system.adapter.ham.0 : ham : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.iceroad.0 : iceroad : raspberrypi - enabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1885, bind: 0.0.0.0 system.adapter.netatmo-crawler.0 : netatmo-crawler : raspberrypi - enabled + system.adapter.rpi2.0 : rpi2 : raspberrypi - enabled + system.adapter.scenes.0 : scenes : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.systeminfo.0 : systeminfo : raspberrypi - enabled + system.adapter.telegram.1 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : raspberrypi - enabled system.adapter.trashschedule.0 : trashschedule : raspberrypi - disabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.deconz.0 : deconz : raspberrypi - enabled, port: 80 + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Instances Used repository: stable Adapter "admin" : 7.1.5 , installed 7.1.5 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "awtrix-light" : 1.3.0 , installed 1.3.0 Adapter "backitup" : 3.0.22 , installed 3.0.22 Adapter "ble" : 0.14.0 , installed 0.14.0 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "deconz" : 1.4.1 , installed 1.4.1 Adapter "device-watcher": 2.12.1 , installed 2.12.1 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "email" : 1.3.1 , installed 1.3.1 Adapter "fb-checkpresence": 1.2.4 , installed 1.2.4 Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "ical" : 1.15.0 , installed 1.15.0 Adapter "iceroad" : 1.2.1 , installed 1.2.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "javascript" : 8.8.3 , installed 8.7.6 [Updatable] Controller "js-controller": 6.0.11 , installed 6.0.11 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "scenes" : 3.2.3 , installed 3.2.3 Adapter "shelly" : 7.0.0 , installed 7.0.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.1.2 , installed 3.1.2 Adapter "systeminfo" : 1.2.0 , installed 1.2.0 Adapter "telegram" : 3.9.0 , installed 3.9.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-icontwo" : 1.5.0 , installed 1.5.0 Adapter "vis-inventwo" : 3.3.4 , installed 3.3.4 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.2 , installed 2.6.2 Objects and States Please stand by - This may take a while Objects: 17598 States: 14753 *** OS-Repositories and Updates *** W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://apt.grafana.com stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545 W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://packages.grafana.com/enterprise/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545 W: Failed to fetch https://packages.grafana.com/enterprise/deb/dists/stable/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545 W: Failed to fetch https://apt.grafana.com/dists/stable/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545 W: Some index files failed to download. They have been ignored, or old ones used instead. Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 http://phoscon.de/apt/deconz generic-beta InRelease Get:4 https://packages.grafana.com/enterprise/deb stable InRelease [7660 B] Get:5 https://apt.grafana.com stable InRelease [7660 B] Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease Hit:7 https://www.pivccu.de/piVCCU stable InRelease Hit:8 https://archive.raspbian.org/raspbian bullseye InRelease Get:9 https://pkgs.tailscale.com/stable/raspbian bullseye InRelease Err:4 https://packages.grafana.com/enterprise/deb stable InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545 Err:5 https://apt.grafana.com stable InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545 Fetched 6578 B in 3s (2619 B/s) Reading package lists... W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://packages.grafana.com/enterprise/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545 W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://apt.grafana.com stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545 W: Failed to fetch https://packages.grafana.com/enterprise/deb/dists/stable/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545 W: Failed to fetch https://apt.grafana.com/dists/stable/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545 W: Some index files failed to download. They have been ignored, or old ones used instead. Pending Updates: 1 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 683091 18396/iobroker.js-c tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 681563 18396/iobroker.js-c tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 16918 858/cupsd tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1000 15124 386/deCONZ tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 15981 899/sshd: /usr/sbin tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 1000 12994 386/deCONZ tcp 0 0 100.80.140.24:47283 0.0.0.0:* LISTEN 0 18600 448/tailscaled tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 17512 866/influxd tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 690389 19679/io.shelly.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 688515 19353/io.sonoff.0 tcp 0 0 0.0.0.0:1886 0.0.0.0:* LISTEN 1001 690191 19412/io.mqtt.0 tcp 0 0 0.0.0.0:1885 0.0.0.0:* LISTEN 1001 690190 19412/io.mqtt.0 tcp6 0 0 :::3000 :::* LISTEN 109 20848 1309/grafana tcp6 0 0 :::22 :::* LISTEN 0 15983 899/sshd: /usr/sbin tcp6 0 0 :::8082 :::* LISTEN 1001 691885 20504/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 683352 18519/io.admin.0 tcp6 0 0 :::8086 :::* LISTEN 999 17868 866/influxd tcp6 0 0 ::1:631 :::* LISTEN 0 16917 858/cupsd tcp6 0 0 fd7a:115c:a1e0:ab:47283 :::* LISTEN 0 18601 448/tailscaled tcp6 0 0 ::1:8888 :::* LISTEN 0 13736 412/pigpiod udp 0 0 0.0.0.0:41641 0.0.0.0:* 0 17044 448/tailscaled udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 12710 379/avahi-daemon: r udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 685877 19199/io.deconz.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 685873 19199/io.deconz.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1000 13025 386/deCONZ udp 0 0 0.0.0.0:45032 0.0.0.0:* 108 12712 379/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 16809 741/dhclient udp6 0 0 :::41641 :::* 0 17043 448/tailscaled udp6 0 0 :::48170 :::* 108 12713 379/avahi-daemon: r udp6 0 0 :::5353 :::* 108 12711 379/avahi-daemon: r udp6 0 0 :::1900 :::* 1001 685879 19199/io.deconz.0 udp6 0 0 :::1900 :::* 1001 685878 19199/io.deconz.0 udp6 0 0 :::1900 :::* 1001 685876 19199/io.deconz.0 udp6 0 0 :::1900 :::* 1001 685875 19199/io.deconz.0 udp6 0 0 :::1900 :::* 1001 685874 19199/io.deconz.0 *** Log File - Last 25 Lines *** 2024-10-04 16:36:06.169 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.72 (shellyplus1pm / shellyplus1pm-c82e1806336c / shellyplus1pm#c82e1806336c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:06.862 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.22 (shellyplus2pm / shellyplus2pm-c049ef857d0c / shellyplus2pm#c049ef857d0c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:17.194 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.20 (shellyplus1pm / shellyplus1pm-d4d4da352b00 / shellyplus1pm#d4d4da352b00#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:18.648 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.42 (shellyplus2pm / shellyplus2pm-c049ef852c88 / shellyplus2pm#c049ef852c88#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:21.645 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.72 (shellyplus1pm / shellyplus1pm-c82e1806336c / shellyplus1pm#c82e1806336c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:24.289 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.22 (shellyplus2pm / shellyplus2pm-c049ef857d0c / shellyplus2pm#c049ef857d0c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:32.669 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.20 (shellyplus1pm / shellyplus1pm-d4d4da352b00 / shellyplus1pm#d4d4da352b00#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:34.201 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.42 (shellyplus2pm / shellyplus2pm-c049ef852c88 / shellyplus2pm#c049ef852c88#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:37.046 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.72 (shellyplus1pm / shellyplus1pm-c82e1806336c / shellyplus1pm#c82e1806336c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:40.659 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.22 (shellyplus2pm / shellyplus2pm-c049ef857d0c / shellyplus2pm#c049ef857d0c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:48.018 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.20 (shellyplus1pm / shellyplus1pm-d4d4da352b00 / shellyplus1pm#d4d4da352b00#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:49.677 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.42 (shellyplus2pm / shellyplus2pm-c049ef852c88 / shellyplus2pm#c049ef852c88#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:52.358 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.72 (shellyplus1pm / shellyplus1pm-c82e1806336c / shellyplus1pm#c82e1806336c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:56.234 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.22 (shellyplus2pm / shellyplus2pm-c049ef857d0c / shellyplus2pm#c049ef857d0c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:37:04.837 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.20 (shellyplus1pm / shellyplus1pm-d4d4da352b00 / shellyplus1pm#d4d4da352b00#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:37:06.486 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.42 (shellyplus2pm / shellyplus2pm-c049ef852c88 / shellyplus2pm#c049ef852c88#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:37:07.729 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.72 (shellyplus1pm / shellyplus1pm-c82e1806336c / shellyplus1pm#c82e1806336c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:37:11.688 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.22 (shellyplus2pm / shellyplus2pm-c049ef857d0c / shellyplus2pm#c049ef857d0c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:37:22.136 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.20 (shellyplus1pm / shellyplus1pm-d4d4da352b00 / shellyplus1pm#d4d4da352b00#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:37:22.147 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.42 (shellyplus2pm / shellyplus2pm-c049ef852c88 / shellyplus2pm#c049ef852c88#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:37:23.084 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.72 (shellyplus1pm / shellyplus1pm-c82e1806336c / shellyplus1pm#c82e1806336c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:37:27.472 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.22 (shellyplus2pm / shellyplus2pm-c049ef857d0c / shellyplus2pm#c049ef857d0c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:37:37.715 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.20 (shellyplus1pm / shellyplus1pm-d4d4da352b00 / shellyplus1pm#d4d4da352b00#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:37:37.908 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.42 (shellyplus2pm / shellyplus2pm-c049ef852c88 / shellyplus2pm#c049ef852c88#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:37:38.444 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.72 (shellyplus1pm / shellyplus1pm-c82e1806336c / shellyplus1pm#c82e1806336c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration ============ Mark until here for C&P =============Was empfiehlst du denn für die regelmäßige Systempflege?
ich mach hin und wieder
sudo apt update sudo apt upgrade sudo rebootund zukünftig dann auch noch
iob stop iob fix iob nodejs-updateSollte man sonst noch was regelmäßig anstoßen?
-
@thomas-braun said in BLE-Adapter empfängt keine Daten:
iob diag
Ich sehe keine Auffälligkeiten:
======== Start marking the full check here ========= ```bash Skript v.2024-08-12 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 OS is similar to: debian Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : 32 bit Systemuptime and Load: 16:36:17 up 5:15, 1 user, load average: 1.18, 0.98, 0.94 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Fri 2024-10-04 16:36:17 CEST Universal time: Fri 2024-10-04 14:36:17 UTC RTC time: n/a Time zone: Europe/Luxembourg (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.7G 201M 0.0K 1.9G 2.1G Swap: 99M 0B 99M Total: 3.9G 1.7G 301M Active iob-Instances: 25 3793 M total memory 1678 M used memory 2651 M active memory 579 M inactive memory 201 M free memory 154 M buffer memory 1759 M swap cache 99 M total swap 0 M used swap 99 M free swap *** top - Table Of Processes *** top - 16:36:18 up 5:15, 1 user, load average: 1.18, 0.98, 0.94 Tasks: 171 total, 3 running, 168 sleeping, 0 stopped, 0 zombie %Cpu(s): 18.1 us, 13.9 sy, 0.0 ni, 65.3 id, 0.0 wa, 0.0 hi, 2.8 si, 0.0 st MiB Mem : 3793.3 total, 200.7 free, 1678.4 used, 1914.2 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 2093.3 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * dhcpcd.service loaded failed failed DHCP Client Daemon LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 118G 67G 46G 60% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 776K 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/sda1 vfat 253M 51M 202M 20% /boot tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri Oct 4 11:20:28 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:4B:4B:CA vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=c8310538-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [Fri Oct 4 11:20:30 2024] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Oct 4 11:20:30 2024] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Fri Oct 4 11:20:32 2024] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 7.2G /var/ 5.3G /var/log 3.8G /var/log/journal/15bf1d53440e420dbea5e0eb6f8b1ed5 3.8G /var/log/journal 1.1G /var/cache Archived and active journals take up 3.7G in the file system. /opt/iobroker/backups: 51G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 971M /opt/iobroker/iobroker-data/ 701M /opt/iobroker/iobroker-data/files 441M /opt/iobroker/iobroker-data/files/javascript.admin 409M /opt/iobroker/iobroker-data/files/javascript.admin/static 408M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 75M /opt/iobroker/iobroker-data/states.jsonl 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 26M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 24M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/main.c9369f6c.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2439935-if00 *** NodeJS-Installation *** /usr/bin/nodejs v20.17.0 /usr/bin/node v20.17.0 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.3 nodejs: Installed: 20.17.0-1nodesource1 Candidate: 20.17.0-1nodesource1 Version table: *** 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 12.22.12~dfsg-1~deb11u5 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages 500 https://archive.raspbian.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 6.0.11 admin: 7.1.5 javascript: 8.7.6 nodejs modules from github: 2 +-- homebridge-blink-for-home@3.9.2 (git+ssh://git@github.com/zidge/homebridge-blink-for-home.git#edf600439f6bbd9a1cbf5e4ca9e676e6bdbff6d2) +-- iobroker.ham@5.3.1 (git+ssh://git@github.com/ioBroker/ioBroker.ham.git#009af26ad98bea3a0783c4d0bd19a1a3c3eeb92c) Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled system.adapter.alias-manager.0 : alias-manager : raspberrypi - enabled system.adapter.awtrix-light.0 : awtrix-light : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.ble.0 : ble : raspberrypi - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled + system.adapter.deconz.0 : deconz : raspberrypi - enabled, port: 80 + system.adapter.device-watcher.0 : device-watcher : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.email.0 : email : raspberrypi - enabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : raspberrypi - enabled + system.adapter.ham.0 : ham : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.iceroad.0 : iceroad : raspberrypi - enabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1885, bind: 0.0.0.0 system.adapter.netatmo-crawler.0 : netatmo-crawler : raspberrypi - enabled + system.adapter.rpi2.0 : rpi2 : raspberrypi - enabled + system.adapter.scenes.0 : scenes : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.systeminfo.0 : systeminfo : raspberrypi - enabled + system.adapter.telegram.1 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : raspberrypi - enabled system.adapter.trashschedule.0 : trashschedule : raspberrypi - disabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.deconz.0 : deconz : raspberrypi - enabled, port: 80 + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Instances Used repository: stable Adapter "admin" : 7.1.5 , installed 7.1.5 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "awtrix-light" : 1.3.0 , installed 1.3.0 Adapter "backitup" : 3.0.22 , installed 3.0.22 Adapter "ble" : 0.14.0 , installed 0.14.0 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "deconz" : 1.4.1 , installed 1.4.1 Adapter "device-watcher": 2.12.1 , installed 2.12.1 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "email" : 1.3.1 , installed 1.3.1 Adapter "fb-checkpresence": 1.2.4 , installed 1.2.4 Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "ical" : 1.15.0 , installed 1.15.0 Adapter "iceroad" : 1.2.1 , installed 1.2.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "javascript" : 8.8.3 , installed 8.7.6 [Updatable] Controller "js-controller": 6.0.11 , installed 6.0.11 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "scenes" : 3.2.3 , installed 3.2.3 Adapter "shelly" : 7.0.0 , installed 7.0.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.1.2 , installed 3.1.2 Adapter "systeminfo" : 1.2.0 , installed 1.2.0 Adapter "telegram" : 3.9.0 , installed 3.9.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-icontwo" : 1.5.0 , installed 1.5.0 Adapter "vis-inventwo" : 3.3.4 , installed 3.3.4 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.2 , installed 2.6.2 Objects and States Please stand by - This may take a while Objects: 17598 States: 14753 *** OS-Repositories and Updates *** W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://apt.grafana.com stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545 W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://packages.grafana.com/enterprise/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545 W: Failed to fetch https://packages.grafana.com/enterprise/deb/dists/stable/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545 W: Failed to fetch https://apt.grafana.com/dists/stable/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545 W: Some index files failed to download. They have been ignored, or old ones used instead. Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 http://phoscon.de/apt/deconz generic-beta InRelease Get:4 https://packages.grafana.com/enterprise/deb stable InRelease [7660 B] Get:5 https://apt.grafana.com stable InRelease [7660 B] Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease Hit:7 https://www.pivccu.de/piVCCU stable InRelease Hit:8 https://archive.raspbian.org/raspbian bullseye InRelease Get:9 https://pkgs.tailscale.com/stable/raspbian bullseye InRelease Err:4 https://packages.grafana.com/enterprise/deb stable InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545 Err:5 https://apt.grafana.com stable InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545 Fetched 6578 B in 3s (2619 B/s) Reading package lists... W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://packages.grafana.com/enterprise/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545 W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://apt.grafana.com stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545 W: Failed to fetch https://packages.grafana.com/enterprise/deb/dists/stable/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545 W: Failed to fetch https://apt.grafana.com/dists/stable/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545 W: Some index files failed to download. They have been ignored, or old ones used instead. Pending Updates: 1 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 683091 18396/iobroker.js-c tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 681563 18396/iobroker.js-c tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 16918 858/cupsd tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1000 15124 386/deCONZ tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 15981 899/sshd: /usr/sbin tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 1000 12994 386/deCONZ tcp 0 0 100.80.140.24:47283 0.0.0.0:* LISTEN 0 18600 448/tailscaled tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 17512 866/influxd tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 690389 19679/io.shelly.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 688515 19353/io.sonoff.0 tcp 0 0 0.0.0.0:1886 0.0.0.0:* LISTEN 1001 690191 19412/io.mqtt.0 tcp 0 0 0.0.0.0:1885 0.0.0.0:* LISTEN 1001 690190 19412/io.mqtt.0 tcp6 0 0 :::3000 :::* LISTEN 109 20848 1309/grafana tcp6 0 0 :::22 :::* LISTEN 0 15983 899/sshd: /usr/sbin tcp6 0 0 :::8082 :::* LISTEN 1001 691885 20504/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 683352 18519/io.admin.0 tcp6 0 0 :::8086 :::* LISTEN 999 17868 866/influxd tcp6 0 0 ::1:631 :::* LISTEN 0 16917 858/cupsd tcp6 0 0 fd7a:115c:a1e0:ab:47283 :::* LISTEN 0 18601 448/tailscaled tcp6 0 0 ::1:8888 :::* LISTEN 0 13736 412/pigpiod udp 0 0 0.0.0.0:41641 0.0.0.0:* 0 17044 448/tailscaled udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 12710 379/avahi-daemon: r udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 685877 19199/io.deconz.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 685873 19199/io.deconz.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1000 13025 386/deCONZ udp 0 0 0.0.0.0:45032 0.0.0.0:* 108 12712 379/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 16809 741/dhclient udp6 0 0 :::41641 :::* 0 17043 448/tailscaled udp6 0 0 :::48170 :::* 108 12713 379/avahi-daemon: r udp6 0 0 :::5353 :::* 108 12711 379/avahi-daemon: r udp6 0 0 :::1900 :::* 1001 685879 19199/io.deconz.0 udp6 0 0 :::1900 :::* 1001 685878 19199/io.deconz.0 udp6 0 0 :::1900 :::* 1001 685876 19199/io.deconz.0 udp6 0 0 :::1900 :::* 1001 685875 19199/io.deconz.0 udp6 0 0 :::1900 :::* 1001 685874 19199/io.deconz.0 *** Log File - Last 25 Lines *** 2024-10-04 16:36:06.169 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.72 (shellyplus1pm / shellyplus1pm-c82e1806336c / shellyplus1pm#c82e1806336c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:06.862 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.22 (shellyplus2pm / shellyplus2pm-c049ef857d0c / shellyplus2pm#c049ef857d0c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:17.194 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.20 (shellyplus1pm / shellyplus1pm-d4d4da352b00 / shellyplus1pm#d4d4da352b00#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:18.648 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.42 (shellyplus2pm / shellyplus2pm-c049ef852c88 / shellyplus2pm#c049ef852c88#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:21.645 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.72 (shellyplus1pm / shellyplus1pm-c82e1806336c / shellyplus1pm#c82e1806336c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:24.289 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.22 (shellyplus2pm / shellyplus2pm-c049ef857d0c / shellyplus2pm#c049ef857d0c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:32.669 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.20 (shellyplus1pm / shellyplus1pm-d4d4da352b00 / shellyplus1pm#d4d4da352b00#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:34.201 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.42 (shellyplus2pm / shellyplus2pm-c049ef852c88 / shellyplus2pm#c049ef852c88#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:37.046 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.72 (shellyplus1pm / shellyplus1pm-c82e1806336c / shellyplus1pm#c82e1806336c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:40.659 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.22 (shellyplus2pm / shellyplus2pm-c049ef857d0c / shellyplus2pm#c049ef857d0c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:48.018 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.20 (shellyplus1pm / shellyplus1pm-d4d4da352b00 / shellyplus1pm#d4d4da352b00#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:49.677 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.42 (shellyplus2pm / shellyplus2pm-c049ef852c88 / shellyplus2pm#c049ef852c88#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:52.358 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.72 (shellyplus1pm / shellyplus1pm-c82e1806336c / shellyplus1pm#c82e1806336c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:36:56.234 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.22 (shellyplus2pm / shellyplus2pm-c049ef857d0c / shellyplus2pm#c049ef857d0c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:37:04.837 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.20 (shellyplus1pm / shellyplus1pm-d4d4da352b00 / shellyplus1pm#d4d4da352b00#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:37:06.486 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.42 (shellyplus2pm / shellyplus2pm-c049ef852c88 / shellyplus2pm#c049ef852c88#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:37:07.729 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.72 (shellyplus1pm / shellyplus1pm-c82e1806336c / shellyplus1pm#c82e1806336c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:37:11.688 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.22 (shellyplus2pm / shellyplus2pm-c049ef857d0c / shellyplus2pm#c049ef857d0c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:37:22.136 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.20 (shellyplus1pm / shellyplus1pm-d4d4da352b00 / shellyplus1pm#d4d4da352b00#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:37:22.147 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.42 (shellyplus2pm / shellyplus2pm-c049ef852c88 / shellyplus2pm#c049ef852c88#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:37:23.084 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.72 (shellyplus1pm / shellyplus1pm-c82e1806336c / shellyplus1pm#c82e1806336c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:37:27.472 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.22 (shellyplus2pm / shellyplus2pm-c049ef857d0c / shellyplus2pm#c049ef857d0c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:37:37.715 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.20 (shellyplus1pm / shellyplus1pm-d4d4da352b00 / shellyplus1pm#d4d4da352b00#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:37:37.908 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.42 (shellyplus2pm / shellyplus2pm-c049ef852c88 / shellyplus2pm#c049ef852c88#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration 2024-10-04 16:37:38.444 - info: shelly.0 (19679) [Sys.timezone] 192.168.178.72 (shellyplus1pm / shellyplus1pm-c82e1806336c / shellyplus1pm#c82e1806336c#1): Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration ============ Mark until here for C&P =============Was empfiehlst du denn für die regelmäßige Systempflege?
ich mach hin und wieder
sudo apt update sudo apt upgrade sudo rebootund zukünftig dann auch noch
iob stop iob fix iob nodejs-updateSollte man sonst noch was regelmäßig anstoßen?
@dan_ce sagte in BLE-Adapter empfängt keine Daten:
Ich sehe keine Auffälligkeiten:
Ich schon.
Setz das in nächster Zeit komplett NEU auf. Raspberry 12 als reines 64Bit-System dann.Boot Target: graphical.target
sudo systemctl set-default multi-user.target- dhcpcd.service loaded failed failed DHCP Client Daemon
Was ist damit los?
Adapter "javascript" : 8.8.3 , installed 8.7.6 [Updatable]
Updaten.
Das Grafana Repository muss nochmal frisch angelegt werden, ich würde da auch nicht das Enterprise-Repo verwenden.
Bei deconz würde ich nicht die Beta verwenden.Configured timezone "Europe/Berlin" and system timezone "Europe/Luxembourg" do not match. Please check configuration
Schau dir das an.
