CanBus Adapter lässt sich nicht installieren
-
@tobit89 das ist nicht die Langfassung!
die kommt davor -
@homoran @homoran
danke für deine schnelle Antwort, leider muss ich das als root ausführen, weil ich noch Loxberry auf dem Pi laufen hab. Hier der Log:======== Start marking the full check here =========
Skript v.2024-05-22 *** BASE SYSTEM *** Static hostname: loxberry Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 21:51:53 up 23 min, 3 users, load average: 0.84, 0.61, 0.62 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: ~ Under-voltage has occurred ~ Arm frequency capping has occurred ~ Throttling has occurred ~ Soft temperature limit has occurred *** Time and Time Zones *** Local time: Wed 2024-08-14 21:51:53 CEST Universal time: Wed 2024-08-14 19:51:53 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: inactive RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': root HOME=/root LBHOMEDIR=/opt/loxberry GROUPS=root User that is running 'js-controller': iobroker LBHOMEDIR=/opt/loxberry HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 8.2G 1.7G 2.5G 14M 4.1G 6.5G Swap: 2.1G 0B 2.1G Total: 10G 1.7G 4.6G Active iob-Instances: 21 7862 M total memory 1634 M used memory 2089 M active memory 3192 M inactive memory 2340 M free memory 159 M buffer memory 3739 M swap cache 2047 M total swap 0 M used swap 2047 M free swap *** top - Table Of Processes *** top - 21:51:54 up 23 min, 3 users, load average: 0.84, 0.61, 0.62 Tasks: 182 total, 1 running, 181 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 12.5 sy, 0.0 ni, 87.5 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 7862.2 total, 2339.5 free, 1635.5 used, 3899.0 buff/cache MiB Swap: 2048.0 total, 2048.0 free, 0.0 used. 6226.7 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * hciuart.service loaded failed failed Configure Bluetooth Modems connected by UART LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 118G 17G 96G 16% / devtmpfs devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 3.9G 120K 3.9G 1% /dev/shm tmpfs tmpfs 1.6G 11M 1.6G 1% /run tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock /dev/zram0 ext4 373M 2.7M 341M 1% /opt/loxberry/log/ramlog /dev/sdc1 vfat 197M 2.0K 197M 1% /media/usb/EFI /dev/sdc2 hfsplus 932G 570G 362G 62% /media/usb/TimeMachine /dev/sdb1 ext4 2.7T 1.7T 1.1T 63% /media/usb/Backup /dev/sda1 vfat 127M 33M 94M 27% /boot tmpfs tmpfs 787M 4.0K 787M 1% /run/user/1001 Messages concerning ext4 filesystem in dmesg: [Wed Aug 14 21:28:10 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=E4:5F:01:02:4D:5A vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 root=PARTUUID=00858852-02 rootfstype=ext4 rootwait net.ifnames=0 logo.nologo console=tty1 [Wed Aug 14 21:28:11 2024] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Aug 14 21:28:11 2024] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Wed Aug 14 21:28:13 2024] EXT4-fs (sda2): re-mounted. Quota mode: none. [Wed Aug 14 21:28:16 2024] EXT4-fs (zram0): mounted filesystem with ordered data mode. Quota mode: none. [Wed Aug 14 21:28:17 2024] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime,lazytime |-/dev devtmpfs devtmpfs rw,relatime,size=3990604k,nr_inodes=997651,mode=755 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,nosuid,nodev,noexec,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=29,pgrp=1,timeout=0,minproto=5,maxproto=5,direct | `-/proc/sys/fs/binfmt_misc binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime | `-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,size=1610184k,nr_inodes=819200,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/credentials/systemd-sysctl.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-sysusers.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-tmpfiles-setup-dev.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | |-/run/credentials/systemd-tmpfiles-setup.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | `-/run/user/1001 tmpfs tmpfs rw,nosuid,nodev,relatime,size=805088k,nr_inodes=201272,mode=700,uid=1001,gid=1001 |-/tmp tmpfs tmpfs rw,nosuid,nodev,noatime,lazytime,size=4025344k | `-/tmp /dev/zram0[/tmp] ext4 rw,nosuid,nodev,relatime |-/var/log tmpfs tmpfs rw,nosuid,nodev,noatime,lazytime,size=51200k | `-/var/log /dev/zram0[/var/log] ext4 rw,nosuid,nodev,relatime |-/opt/loxberry/log/ramlog /dev/zram0 ext4 rw,nosuid,nodev,relatime |-/var/tmp /dev/zram0[/var/tmp] ext4 rw,nosuid,nodev,relatime |-/opt/loxberry/log/plugins /dev/zram0[/log/plugins] ext4 rw,nosuid,nodev,relatime |-/opt/loxberry/log/system_tmpfs /dev/zram0[/log/system_tmpfs] ext4 rw,nosuid,nodev,relatime |-/media/usb/EFI /dev/sdc1 vfat rw,nosuid,nodev,noexec,relatime,uid=1001,gid=1001,fmask=0000,dmask=0000,allow_utime=0022,codepage=437,iocharset=utf8,shortname=mixed,flush,errors=remount-ro |-/media/usb/TimeMachine /dev/sdc2 hfsplus ro,nosuid,nodev,noexec,relatime,umask=22,uid=0,gid=0,nls=utf8 |-/media/usb/Backup /dev/sdb1 ext4 rw,nosuid,nodev,noexec,relatime |-/boot /dev/sda1 vfat rw,noatime,lazytime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro `-/media/smb /opt/loxberry/system/autofs/auto.smb autofs rw,relatime,fd=6,pgrp=1446,timeout=300,minproto=5,maxproto=5,indirect Files in neuralgic directories: /var: 2.2G /var/ 131M /var/lib 65M /var/lib/influxdb 56M /var/lib/influxdb/data 51M /var/lib/dpkg Archived and active journals take up 8.0M in the file system. /opt/iobroker/backups: 148M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 368M /opt/iobroker/iobroker-data/ 280M /opt/iobroker/iobroker-data/files 89M /opt/iobroker/iobroker-data/files/echarts.admin 57M /opt/iobroker/iobroker-data/files/echarts 52M /opt/iobroker/iobroker-data/files/backitup.admin The five largest files in iobroker-data are: 27M /opt/iobroker/iobroker-data/files/backitup.admin/static/js/main.ce422ec2.js.map 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 24M /opt/iobroker/iobroker-data/files/echarts/static/js/main.2b7495c2.js.map 24M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.2b7495c2.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.245b61c0.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp *** NodeJS-Installation *** /usr/bin/nodejs v16.20.2 /usr/local/bin/node v22.6.0 /usr/local/bin/npm 10.8.2 /usr/local/bin/npx 10.8.2 /usr/local/bin/corepack 0.29.3 *** nodejs is NOT correctly installed *** nodejs: Installed: 16.20.2-1nodesource1 Candidate: 16.20.2-1nodesource1 Version table: 18.19.0+dfsg-6~deb12u2 500 500 https://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 https://deb.debian.org/debian-security bookworm-security/main arm64 Packages *** 16.20.2-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 16.20.1-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.20.0-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.19.1-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.19.0-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.18.1-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.18.0-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.17.1-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.17.0-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.16.0-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.15.1-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.15.0-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.14.2-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.14.1-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.14.0-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.13.2-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.13.1-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.13.0-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.12.0-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.11.1-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.11.0-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.9.1-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.6.2-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.6.1-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.4.2-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.4.1-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages 16.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_16.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 6.0.9 admin: 7.0.22 javascript: "javascript" not found nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : loxberry - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.asterisk.0 : asterisk : loxberry - enabled, port: 5038 + system.adapter.awtrix-light.0 : awtrix-light : loxberry - enabled + system.adapter.backitup.0 : backitup : loxberry - enabled + system.adapter.discovery.0 : discovery : loxberry - enabled + system.adapter.echarts.0 : echarts : loxberry - enabled + system.adapter.fritzdect.0 : fritzdect : loxberry - enabled system.adapter.homeconnect.0 : homeconnect : loxberry - disabled system.adapter.ical.0 : ical : loxberry - enabled + system.adapter.influxdb.0 : influxdb : loxberry - enabled, port: 8086 system.adapter.logparser.0 : logparser : loxberry - disabled + system.adapter.loxone.0 : loxone : loxberry - enabled, port: 80 + system.adapter.mihome-vacuum.0 : mihome-vacuum : loxberry - enabled, port: 54321 + system.adapter.mqtt.0 : mqtt : loxberry - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : loxberry - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.operating-hours.0 : operating-hours : loxberry - enabled + system.adapter.pvforecast.0 : pvforecast : loxberry - enabled + system.adapter.rpi2.0 : rpi2 : loxberry - enabled + system.adapter.statistics.0 : statistics : loxberry - enabled + system.adapter.tr-064.0 : tr-064 : loxberry - enabled + system.adapter.trashschedule.0 : trashschedule : loxberry - enabled system.adapter.web.0 : web : loxberry - disabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.worx.0 : worx : loxberry - enabled + system.adapter.zigbee.0 : zigbee : loxberry - enabled, port: tcp://192.168.10.120:20108 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : loxberry - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.asterisk.0 : asterisk : loxberry - enabled, port: 5038 + system.adapter.influxdb.0 : influxdb : loxberry - enabled, port: 8086 + system.adapter.loxone.0 : loxone : loxberry - enabled, port: 80 + system.adapter.mihome-vacuum.0 : mihome-vacuum : loxberry - enabled, port: 54321 + system.adapter.mqtt.0 : mqtt : loxberry - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : loxberry - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.zigbee.0 : zigbee : loxberry - enabled, port: tcp://192.168.10.120:20108 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Instances Used repository: stable Adapter "admin" : 7.0.22 , installed 7.0.22 Adapter "asterisk" : 1.0.6 , installed 1.0.6 Adapter "awtrix-light" : 1.2.1 , installed 1.2.1 Adapter "backitup" : 3.0.16 , installed 3.0.16 Adapter "discovery" : 4.5.0 , installed 4.5.0 Adapter "echarts" : 1.7.2 , installed 1.7.2 Adapter "fritzdect" : 2.5.9 , installed 2.5.9 Adapter "homeconnect" : 1.4.1 , installed 1.4.1 Adapter "ical" : 1.15.0 , installed 1.15.0 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Controller "js-controller": 6.0.9 , installed 6.0.9 Adapter "logparser" : 2.2.2 , installed 2.2.2 Adapter "loxone" : 3.0.1 , installed 3.0.0 [Updatable] Adapter "mihome-vacuum": 4.2.0 , installed 4.2.0 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "node-red" : 5.2.1 , installed 5.2.1 Adapter "operating-hours": 1.0.6 , installed 1.0.6 Adapter "pvforecast" : 3.0.0 , installed 3.0.0 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "statistics" : 2.4.0 , installed 2.4.0 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "worx" : 3.0.2 , installed 3.0.2 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 7532 States: 6254 *** OS-Repositories and Updates *** Hit:1 https://deb.debian.org/debian bookworm InRelease Hit:2 https://deb.debian.org/debian bookworm-updates InRelease Hit:3 https://deb.debian.org/debian-security bookworm-security InRelease Hit:4 https://repos.influxdata.com/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_16.x nodistro InRelease Hit:6 https://deb.debian.org/debian bookworm-backports InRelease Hit:7 https://dl.yarnpkg.com/debian stable InRelease Hit:8 https://dietpi.com/apt bookworm InRelease Hit:9 https://packages.sury.org/php bookworm InRelease Hit:10 https://archive.raspberrypi.com/debian bookworm InRelease Hit:11 https://dietpi.com/apt all InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1002 15952 2037/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1002 15947 2037/iobroker.js-co tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1002 18423 2987/node-red tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 111 14177 1443/mosquitto tcp 0 0 127.0.0.1:64994 0.0.0.0:* LISTEN 0 15707 1807/shellinaboxd tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 998 14900 1449/influxd tcp 0 0 0.0.0.0:5038 0.0.0.0:* LISTEN 116 13122 1401/asterisk tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 15658 1640/smbd tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 12085 1/init tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 15495 1500/sshd: /usr/sbi tcp 0 0 0.0.0.0:53 0.0.0.0:* LISTEN 0 15833 1951/dnsmasq tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 15657 1640/smbd tcp6 0 0 :::8086 :::* LISTEN 998 13240 1449/influxd tcp6 0 0 :::8081 :::* LISTEN 1002 18199 2056/io.admin.0 tcp6 0 0 :::6066 :::* LISTEN 0 15125 1682/apache2 tcp6 0 0 :::1883 :::* LISTEN 111 14178 1443/mosquitto tcp6 0 0 :::9002 :::* LISTEN 111 15548 1443/mosquitto tcp6 0 0 :::139 :::* LISTEN 0 15656 1640/smbd tcp6 0 0 :::80 :::* LISTEN 0 15115 1682/apache2 tcp6 0 0 :::111 :::* LISTEN 0 243 1/init tcp6 0 0 :::21 :::* LISTEN 0 15460 1440/vsftpd tcp6 0 0 :::22 :::* LISTEN 0 15497 1500/sshd: /usr/sbi tcp6 0 0 :::53 :::* LISTEN 0 15835 1951/dnsmasq tcp6 0 0 :::445 :::* LISTEN 0 15655 1640/smbd tcp6 0 0 :::443 :::* LISTEN 0 15119 1682/apache2 udp 0 0 0.0.0.0:11884 0.0.0.0:* 1001 15788 1829/perl udp 0 0 0.0.0.0:57030 0.0.0.0:* 116 15141 1401/asterisk udp 0 0 0.0.0.0:53 0.0.0.0:* 0 15832 1951/dnsmasq udp 0 0 0.0.0.0:111 0.0.0.0:* 0 12301 1/init udp 0 0 192.168.10.255:137 0.0.0.0:* 0 15040 1565/nmbd udp 0 0 192.168.10.101:137 0.0.0.0:* 0 15039 1565/nmbd udp 0 0 0.0.0.0:137 0.0.0.0:* 0 15024 1565/nmbd udp 0 0 192.168.10.255:138 0.0.0.0:* 0 15042 1565/nmbd udp 0 0 192.168.10.101:138 0.0.0.0:* 0 15041 1565/nmbd udp 0 0 0.0.0.0:138 0.0.0.0:* 0 15025 1565/nmbd udp 0 0 0.0.0.0:53421 0.0.0.0:* 1002 17400 3156/io.mihome-vacu udp 0 0 0.0.0.0:4569 0.0.0.0:* 116 13137 1401/asterisk udp 0 0 0.0.0.0:5060 0.0.0.0:* 116 13136 1401/asterisk udp 0 0 0.0.0.0:5353 0.0.0.0:* 113 13520 262/avahi-daemon: r udp 0 0 0.0.0.0:38639 0.0.0.0:* 113 13522 262/avahi-daemon: r udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 16432 1424/perl udp6 0 0 :::59867 :::* 113 13523 262/avahi-daemon: r udp6 0 0 :::53 :::* 0 15834 1951/dnsmasq udp6 0 0 :::111 :::* 0 12302 1/init udp6 0 0 :::50376 :::* 116 15142 1401/asterisk udp6 0 0 :::5353 :::* 113 13521 262/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-08-14 21:33:38.626 - debug: zigbee.0 (3143) DeviceAvailability:Non-pingable device 0xa4c1386e4d56c5d2 TS0601 was last seen '175253.021' seconds ago. 2024-08-14 21:34:38.626 - debug: zigbee.0 (3143) DeviceAvailability:Non-pingable device 0xa4c1386e4d56c5d2 TS0601 was last seen '175313.021' seconds ago. 2024-08-14 21:35:38.627 - debug: zigbee.0 (3143) DeviceAvailability:Non-pingable device 0xa4c1386e4d56c5d2 TS0601 was last seen '175373.022' seconds ago. 2024-08-14 21:36:38.629 - debug: zigbee.0 (3143) DeviceAvailability:Non-pingable device 0xa4c1386e4d56c5d2 TS0601 was last seen '175433.023' seconds ago. 2024-08-14 21:37:38.629 - debug: zigbee.0 (3143) DeviceAvailability:Non-pingable device 0xa4c1386e4d56c5d2 TS0601 was last seen '175493.024' seconds ago. 2024-08-14 21:37:51.875 - info: mqtt.0 (3167) send2Server mqtt.0.113.Whirlpool.Water.HeatTemperature[113/Whirlpool/Water/HeatTemperature] 2024-08-14 21:38:38.631 - debug: zigbee.0 (3143) DeviceAvailability:Non-pingable device 0xa4c1386e4d56c5d2 TS0601 was last seen '175553.025' seconds ago. 2024-08-14 21:38:51.950 - info: mqtt.0 (3167) send2Server mqtt.0.113.Whirlpool.Water.Temperature[113/Whirlpool/Water/Temperature] 2024-08-14 21:39:38.631 - debug: zigbee.0 (3143) DeviceAvailability:Non-pingable device 0xa4c1386e4d56c5d2 TS0601 was last seen '175613.026' seconds ago. 2024-08-14 21:40:38.631 - debug: zigbee.0 (3143) DeviceAvailability:Non-pingable device 0xa4c1386e4d56c5d2 TS0601 was last seen '175673.026' seconds ago. 2024-08-14 21:41:38.631 - debug: zigbee.0 (3143) DeviceAvailability:Non-pingable device 0xa4c1386e4d56c5d2 TS0601 was last seen '175733.026' seconds ago. 2024-08-14 21:41:51.929 - info: mqtt.0 (3167) send2Server mqtt.0.113.Whirlpool.Water.HeatTemperature[113/Whirlpool/Water/HeatTemperature] 2024-08-14 21:42:38.630 - debug: zigbee.0 (3143) DeviceAvailability:Non-pingable device 0xa4c1386e4d56c5d2 TS0601 was last seen '175793.025' seconds ago. 2024-08-14 21:43:38.632 - debug: zigbee.0 (3143) DeviceAvailability:Non-pingable device 0xa4c1386e4d56c5d2 TS0601 was last seen '175853.027' seconds ago. 2024-08-14 21:44:38.633 - debug: zigbee.0 (3143) DeviceAvailability:Non-pingable device 0xa4c1386e4d56c5d2 TS0601 was last seen '175913.028' seconds ago. 2024-08-14 21:45:38.633 - debug: zigbee.0 (3143) DeviceAvailability:Non-pingable device 0xa4c1386e4d56c5d2 TS0601 was last seen '175973.028' seconds ago. 2024-08-14 21:46:38.634 - debug: zigbee.0 (3143) DeviceAvailability:Non-pingable device 0xa4c1386e4d56c5d2 TS0601 was last seen '176033.029' seconds ago. 2024-08-14 21:47:38.635 - debug: zigbee.0 (3143) DeviceAvailability:Non-pingable device 0xa4c1386e4d56c5d2 TS0601 was last seen '176093.03' seconds ago. 2024-08-14 21:47:51.989 - info: mqtt.0 (3167) send2Server mqtt.0.113.Whirlpool.Water.Temperature[113/Whirlpool/Water/Temperature] 2024-08-14 21:48:38.636 - debug: zigbee.0 (3143) DeviceAvailability:Non-pingable device 0xa4c1386e4d56c5d2 TS0601 was last seen '176153.031' seconds ago. 2024-08-14 21:49:38.636 - debug: zigbee.0 (3143) DeviceAvailability:Non-pingable device 0xa4c1386e4d56c5d2 TS0601 was last seen '176213.031' seconds ago. 2024-08-14 21:49:51.841 - info: mqtt.0 (3167) send2Server mqtt.0.113.Whirlpool.Water.Temperature[113/Whirlpool/Water/Temperature] 2024-08-14 21:50:38.636 - debug: zigbee.0 (3143) DeviceAvailability:Non-pingable device 0xa4c1386e4d56c5d2 TS0601 was last seen '176273.031' seconds ago. 2024-08-14 21:51:38.636 - debug: zigbee.0 (3143) DeviceAvailability:Non-pingable device 0xa4c1386e4d56c5d2 TS0601 was last seen '176333.031' seconds ago. 2024-08-14 21:52:38.637 - debug: zigbee.0 (3143) DeviceAvailability:Non-pingable device 0xa4c1386e4d56c5d2 TS0601 was last seen '176393.032' seconds ago.============ Mark until here for C&P =============
iob diag has finished.
-
@tobit89 wie @Thomas-Braun schon schrieb ist dein node kreuz und quer installiert.
Außer dass da 2 verschiedene node Installationen drauf sind ist node 16 viel zu alt, node22 noch nicht reifob du dur mit dem root noch rechtmäßig was verbogen hast weiß ich jetzt nicht
-
@tobit89 sagte in CanBus Adapter lässt sich nicht installieren:
leider muss ich das als root ausführen, weil ich noch Loxberry auf dem Pi laufen hab.
Das ist KEIN Grund. Man legt sich IMMER user für die tägliche Arbeit an, wenn es keinen geben sollte. Auch auf Loxberry muss das möglich sein, ganz einfach weil das Linux-Grundlagen sind. Das funktioniert da so.
Die Spannungsversorgung schaut zu schwach aus.
Vernünftiges Netzteil am Start?Und warum hast du nodejs noch nicht richtig aufgesetzt?
Befehl dazu hatte ich oben schon gepostet. -
@thomas-braun
ok, dann werde ich mich noch mal mit den Benutzer auseinandersetzen.
Ich habe versuche das update zu machen als Loxberry User, bekomme das aber als antwort:Sorry, user loxberry is not allowed to execute '/usr/bin/curl -sLf https://iobroker.net/node-update.sh --output /home/iobroker/.nodejs-update.sh' as iobroker on loxberry.
-
Das ist klar, weil der user loxberry hoffentlich nur seinen eigenen Kram ausführen darf.
Leg dir einen user 'tobit' oder 'deinvorname' an. Und der kommt dann in die Gruppe 'sudo' sowie 'iobroker' rein.
Dann funktioniert das auch. -
@thomas-braun ...und noch in
adm -
Als root:
adduser tobit89 usermod -aG adm,dialout,sudo,audio,video,plugdev,users,iobroker tobit89 exitUnd dann mit diesem neuen User arbeiten.
-
@thomas-braun Danke, hat jetzt alles geklappt und läuft auch wieder. Super vielen Dank für deinen Support.
Zum Netzteil, das sitzt ein 3A Step Down Modul vor was von 24V auf 5V regelt.Gruß Tobi
-
@tobit89 sagte in CanBus Adapter lässt sich nicht installieren:
Zum Netzteil, das sitzt ein 3A Step Down Modul vor was von 24V auf 5V regelt.
Was auch immer das ist. Jedenfalls meckert dein Raspberry, das er keine stabile Spannungsversorgung hat.
