NEWS
Multihosteinrichtung funktioniert nicht!
Multihosteinrichtung funktioniert nicht!
ioBroker Allgemein
8
Posts
3
Posters
472
Views
3
Watching
-
Hi Leute,
seit Tagen kämpfe ich mit der Einrichtung eines Multihost Systems und ich bin mit dem Latein echt am Ende. Jetzt habe ich mal den folgenden Test gemacht:
- 2x ein völlig neues IOS (Raspberry Pi OS Lite (64-bit) aufgesetzt) (Raspberry Pi Imager v.1.8.1
- in je einem Pi4 8gb gesteckt und gebootet.
- direkt im Anschluss iobroker installiert und über das Webinterface "final" eingerichtet.
- sobald das erledigt war direkt Multihost enable und connect eingegeben, und jetzt hängen beide Pis wieder direkt nach dieser Eingabe und gehen nicht "zur Eingabeaufforderung" zurück.... jemand ne idee?
- nachdem das "blütenfrische" iOS sind gibt es auch kein redis.
Verlauf vom Master:
login as: brokerer brokerer@192.168.1.59's password: Linux Pi4-iOMaster1 6.1.0-rpi4-rpi-v8 #1 SMP PREEMPT Debian 1:6.1.54-1+rpt2 (202 3-10-05) aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. brokerer@Pi4-iOMaster1:~ $ curl -sLf https://iobroker.net/install.sh | bash - library: loaded Library version=2023-10-13 ========================================================================== Welcome to the ioBroker installer! Installer version: 2023-10-13 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/4) ========================================================================== Hit:1 http://deb.debian.org/debian bookworm InRelease Get:2 http://deb.debian.org/debian-security bookworm-security InRelease [48.0 kB ] Get:3 http://deb.debian.org/debian bookworm-updates InRelease [52.1 kB] Get:4 http://archive.raspberrypi.com/debian bookworm InRelease [23.6 kB] Get:5 http://deb.debian.org/debian-security bookworm-security/main arm64 Package s [93.9 kB] Get:6 http://deb.debian.org/debian-security bookworm-security/main armhf Package s [91.5 kB] Get:7 http://deb.debian.org/debian-security bookworm-security/main Translation-e n [54.8 kB] Get:8 http://deb.debian.org/debian-security bookworm-security/contrib Translatio n-en [372 B] Get:9 http://deb.debian.org/debian bookworm-updates/main arm64 Packages [6,672 B ] Get:10 http://deb.debian.org/debian bookworm-updates/main armhf Packages [6,648 B] Get:11 http://deb.debian.org/debian bookworm-updates/main Translation-en [5,204 B] Get:12 http://archive.raspberrypi.com/debian bookworm/main armhf Packages [346 k B] Get:13 http://archive.raspberrypi.com/debian bookworm/main arm64 Packages [338 k B] Fetched 1,067 kB in 2s (589 kB/s) Reading package lists... Done N: Repository 'http://archive.raspberrypi.com/debian bookworm InRelease' changed its 'Suite' value from 'testing' to 'stable' ========================================================================== Node.js not found. Installing... ========================================================================== Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Reading package lists... Done Reading package lists... Done Building dependency tree... Done Reading state information... Done ca-certificates is already the newest version (20230311). gnupg is already the newest version (2.2.40-1.1). gnupg set to manually installed. The following packages will be upgraded: curl libcurl3-gnutls libcurl4 3 upgraded, 0 newly installed, 0 to remove and 28 not upgraded. Need to get 1,035 kB of archives. After this operation, 0 B of additional disk space will be used. Get:1 http://deb.debian.org/debian-security bookworm-security/main arm64 curl arm64 7.88.1-10+deb12u4 [308 kB] Get:2 http://deb.debian.org/debian-security bookworm-security/main arm64 libcurl4 arm64 7.88.1-10+deb12u4 [366 kB] Get:3 http://deb.debian.org/debian-security bookworm-security/main arm64 libcurl3-gnutls arm64 7.88.1-10+deb12u4 [361 kB] Fetched 1,035 kB in 0s (3,348 kB/s) apt-listchanges: Reading changelogs... (Reading database ... 55058 files and directories currently installed.) Preparing to unpack .../curl_7.88.1-10+deb12u4_arm64.deb ... Unpacking curl (7.88.1-10+deb12u4) over (7.88.1-10+deb12u3) ... Preparing to unpack .../libcurl4_7.88.1-10+deb12u4_arm64.deb ... Unpacking libcurl4:arm64 (7.88.1-10+deb12u4) over (7.88.1-10+deb12u3) ... Preparing to unpack .../libcurl3-gnutls_7.88.1-10+deb12u4_arm64.deb ... Unpacking libcurl3-gnutls:arm64 (7.88.1-10+deb12u4) over (7.88.1-10+deb12u3) ... Setting up libcurl3-gnutls:arm64 (7.88.1-10+deb12u4) ... Setting up libcurl4:arm64 (7.88.1-10+deb12u4) ... Setting up curl (7.88.1-10+deb12u4) ... Processing triggers for man-db (2.11.2-2) ... Processing triggers for libc-bin (2.36-9+rpt2+deb12u3) ... deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_18.x nodistro main Processing triggers for man-db (2.11.2-2) ...ource1_arm64.deb ...led.) Installed nodejs Node.js Installed successfully! Changing npm registry to https://registry.npmjs.org Processing triggers for man-db (2.11.2-2) ...arm64.deb ... installed.) Installed acl Setting up libavahi-compat-libdnssd-dev:arm64 (0.8-10) ...-10_arm64.deb ... Installed libavahi-compat-libdnssd-dev Processing triggers for man-db (2.11.2-2) ...1) ...1_arm64.deb ...ed.) Installed libudev-dev Processing triggers for libc-bin (2.36-9+rpt2+deb12u3) .....m64.deb ...pt2) ... Installed libpam0g-dev Processing triggers for man-db (2.11.2-2) ...m64.deb ......installed.) Installed git Extracting templates from packages: 100% Setting up libcairo2-dev:arm64 (1.16.0-7+rpt1) ....u3) ...t1) .........rm64.deb ... Installed libcairo2-dev Processing triggers for libc-bin (2.36-9+rpt2+deb12u3) ...m64.deb ... .... Installed libpango1.0-dev Setting up libjpeg-dev:arm64 (1:2.1.5-2) ...5-2) ...4.deb ....deb ...) Installed libjpeg-dev Processing triggers for libc-bin (2.36-9+rpt2+deb12u3) ... installed.) Installed libgif-dev Processing triggers for libgdk-pixbuf-2.0-0:arm64 (2.42.10+dfsg-1+b1) .......... Installed librsvg2-dev Processing triggers for libc-bin (2.36-9+rpt2+deb12u3) .....nstalled.) Installed cmake ========================================================================== Creating ioBroker user and directory (2/4) ========================================================================== User iobroker created Created /etc/sudoers.d/iobroker Directory /opt/iobroker created ========================================================================== Installing ioBroker (3/4) ========================================================================== ========================================================================== Finalizing installation (4/4) ========================================================================== Enabling autostart... Created symlink /etc/systemd/system/multi-user.target.wants/iobroker.service → /lib/systemd/system/iobroker.service. Autostart enabled! Fixing directory permissions... ========================================================================== ioBroker was installed successfully Open http://192.168.1.59:8081 in a browser and start configuring! ========================================================================== You need to re-login before doing anything else on the console! brokerer@Pi4-iOMaster1:~ $ ^C brokerer@Pi4-iOMaster1:~ $ iobroker multihost enable Multihost discovery server activated on this host. If iobroker is currently not running please start befeore trying to discover this host. Important: Multihost discovery works with UDP packets. Make sure they are routed correctly in your network. If you use Docker you also need to configure this correctly. Multihost discovery will be automatically deactivated after 15 minutes. If you want to activate it permanently use the --persist flag Discovery authentication activated. Enter secret phrase for connection: Repeat secret phrase for connection: Changing objects server to accept connections on all IP addresses. Changing states server to accept connections on all IP addresses. Please restart ioBroker for the changes to take effect: "iobroker restart" Multihost discovery server: enabled Discovery authentication: enabled Persistent activation: disabled Objects: jsonl on 0.0.0.0 States: jsonl on 0.0.0.0Verlauf vom Slave:
login as: brokerer brokerer@192.168.1.62's password: Linux Pi4-iOSlave1 6.1.0-rpi4-rpi-v8 #1 SMP PREEMPT Debian 1:6.1.54-1+rpt2 (2023 -10-05) aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. brokerer@Pi4-iOSlave1:~ $ vgencmd -bash: vgencmd: command not found brokerer@Pi4-iOSlave1:~ $ curl -sLf https://iobroker.net/install.sh | bash - library: loaded Library version=2023-10-13 ========================================================================== Welcome to the ioBroker installer! Installer version: 2023-10-13 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/4) ========================================================================== Hit:1 http://deb.debian.org/debian bookworm InRelease Get:2 http://deb.debian.org/debian-security bookworm-security InRelease [48.0 kB] Get:3 http://archive.raspberrypi.com/debian bookworm InRelease [23.6 kB] Get:4 http://deb.debian.org/debian bookworm-updates InRelease [52.1 kB] Get:5 http://deb.debian.org/debian-security bookworm-security/main armhf Packages [91.5 kB] Get:6 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages [93.9 kB] Get:7 http://deb.debian.org/debian-security bookworm-security/main Translation-en [54.8 kB] Get:8 http://deb.debian.org/debian-security bookworm-security/contrib Translation-en [372 B] Get:9 http://deb.debian.org/debian bookworm-updates/main armhf Packages [6,648 B] Get:10 http://deb.debian.org/debian bookworm-updates/main arm64 Packages [6,672 B] Get:11 http://deb.debian.org/debian bookworm-updates/main Translation-en [5,204 B] Get:12 http://archive.raspberrypi.com/debian bookworm/main armhf Packages [346 kB] Get:13 http://archive.raspberrypi.com/debian bookworm/main arm64 Packages [338 kB] Fetched 1,067 kB in 2s (617 kB/s) Reading package lists... Done N: Repository 'http://archive.raspberrypi.com/debian bookworm InRelease' changed its 'Suite' value from 'testing' to 'stable' ========================================================================== Node.js not found. Installing... ========================================================================== Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Reading package lists... Done Reading package lists... Done Building dependency tree... Done Reading state information... Done ca-certificates is already the newest version (20230311). gnupg is already the newest version (2.2.40-1.1). gnupg set to manually installed. The following packages will be upgraded: curl libcurl3-gnutls libcurl4 3 upgraded, 0 newly installed, 0 to remove and 28 not upgraded. Need to get 1,035 kB of archives. After this operation, 0 B of additional disk space will be used. Get:1 http://deb.debian.org/debian-security bookworm-security/main arm64 curl arm64 7.88.1-10+deb12u4 [308 kB] Get:2 http://deb.debian.org/debian-security bookworm-security/main arm64 libcurl4 arm64 7.88.1-10+deb12u4 [366 kB] Get:3 http://deb.debian.org/debian-security bookworm-security/main arm64 libcurl3-gnutls arm64 7.88.1-10+deb12u4 [361 kB] Fetched 1,035 kB in 0s (3,272 kB/s) apt-listchanges: Reading changelogs... (Reading database ... 55058 files and directories currently installed.) Preparing to unpack .../curl_7.88.1-10+deb12u4_arm64.deb ... Unpacking curl (7.88.1-10+deb12u4) over (7.88.1-10+deb12u3) ... Preparing to unpack .../libcurl4_7.88.1-10+deb12u4_arm64.deb ... Unpacking libcurl4:arm64 (7.88.1-10+deb12u4) over (7.88.1-10+deb12u3) ... Preparing to unpack .../libcurl3-gnutls_7.88.1-10+deb12u4_arm64.deb ... Unpacking libcurl3-gnutls:arm64 (7.88.1-10+deb12u4) over (7.88.1-10+deb12u3) ... Setting up libcurl3-gnutls:arm64 (7.88.1-10+deb12u4) ... Setting up libcurl4:arm64 (7.88.1-10+deb12u4) ... Setting up curl (7.88.1-10+deb12u4) ... Processing triggers for man-db (2.11.2-2) ... Processing triggers for libc-bin (2.36-9+rpt2+deb12u3) ... deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_18.x nodistro main Processing triggers for man-db (2.11.2-2) ...ource1_arm64.deb ...led.) Installed nodejs Node.js Installed successfully! Changing npm registry to https://registry.npmjs.org Processing triggers for man-db (2.11.2-2) ...arm64.deb ... installed.) Installed acl Setting up libavahi-compat-libdnssd-dev:arm64 (0.8-10) ...-10_arm64.deb ... Installed libavahi-compat-libdnssd-dev Processing triggers for man-db (2.11.2-2) ...1) ...1_arm64.deb ...ed.) Installed libudev-dev Processing triggers for libc-bin (2.36-9+rpt2+deb12u3) .....m64.deb ...pt2) ... Installed libpam0g-dev Processing triggers for man-db (2.11.2-2) ...m64.deb ......installed.) Installed git Extracting templates from packages: 100% Setting up libcairo2-dev:arm64 (1.16.0-7+rpt1) ....u3) ...t1) .........rm64.deb ... Installed libcairo2-dev Processing triggers for libc-bin (2.36-9+rpt2+deb12u3) ...m64.deb ... .... Installed libpango1.0-dev Setting up libjpeg-dev:arm64 (1:2.1.5-2) ...5-2) ...4.deb ....deb ...) Installed libjpeg-dev Processing triggers for libc-bin (2.36-9+rpt2+deb12u3) ... installed.) Installed libgif-dev Processing triggers for libgdk-pixbuf-2.0-0:arm64 (2.42.10+dfsg-1+b1) .......... Installed librsvg2-dev Processing triggers for libc-bin (2.36-9+rpt2+deb12u3) .....nstalled.) Installed cmake ========================================================================== Creating ioBroker user and directory (2/4) ========================================================================== User iobroker created Created /etc/sudoers.d/iobroker Directory /opt/iobroker created ========================================================================== Installing ioBroker (3/4) ========================================================================== ========================================================================== Finalizing installation (4/4) ========================================================================== Enabling autostart... Created symlink /etc/systemd/system/multi-user.target.wants/iobroker.service → /lib/systemd/system/iobroker.service. Autostart enabled! Fixing directory permissions... ========================================================================== ioBroker was installed successfully Open http://192.168.1.62:8081 in a browser and start configuring! ========================================================================== You need to re-login before doing anything else on the console! brokerer@Pi4-iOSlave1:~ $ ^C brokerer@Pi4-iOSlave1:~ $ iobroker multihost connect
(so sieht es seit ~10 min. aus)
beide Pis hängen im WLAN an der selben Fritzbox.... hat jemand eine Idee wo es hier klemmen könnte?
1000 Dank vorab. -
Hi Leute,
seit Tagen kämpfe ich mit der Einrichtung eines Multihost Systems und ich bin mit dem Latein echt am Ende. Jetzt habe ich mal den folgenden Test gemacht:
- 2x ein völlig neues IOS (Raspberry Pi OS Lite (64-bit) aufgesetzt) (Raspberry Pi Imager v.1.8.1
- in je einem Pi4 8gb gesteckt und gebootet.
- direkt im Anschluss iobroker installiert und über das Webinterface "final" eingerichtet.
- sobald das erledigt war direkt Multihost enable und connect eingegeben, und jetzt hängen beide Pis wieder direkt nach dieser Eingabe und gehen nicht "zur Eingabeaufforderung" zurück.... jemand ne idee?
- nachdem das "blütenfrische" iOS sind gibt es auch kein redis.
Verlauf vom Master:
login as: brokerer brokerer@192.168.1.59's password: Linux Pi4-iOMaster1 6.1.0-rpi4-rpi-v8 #1 SMP PREEMPT Debian 1:6.1.54-1+rpt2 (202 3-10-05) aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. brokerer@Pi4-iOMaster1:~ $ curl -sLf https://iobroker.net/install.sh | bash - library: loaded Library version=2023-10-13 ========================================================================== Welcome to the ioBroker installer! Installer version: 2023-10-13 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/4) ========================================================================== Hit:1 http://deb.debian.org/debian bookworm InRelease Get:2 http://deb.debian.org/debian-security bookworm-security InRelease [48.0 kB ] Get:3 http://deb.debian.org/debian bookworm-updates InRelease [52.1 kB] Get:4 http://archive.raspberrypi.com/debian bookworm InRelease [23.6 kB] Get:5 http://deb.debian.org/debian-security bookworm-security/main arm64 Package s [93.9 kB] Get:6 http://deb.debian.org/debian-security bookworm-security/main armhf Package s [91.5 kB] Get:7 http://deb.debian.org/debian-security bookworm-security/main Translation-e n [54.8 kB] Get:8 http://deb.debian.org/debian-security bookworm-security/contrib Translatio n-en [372 B] Get:9 http://deb.debian.org/debian bookworm-updates/main arm64 Packages [6,672 B ] Get:10 http://deb.debian.org/debian bookworm-updates/main armhf Packages [6,648 B] Get:11 http://deb.debian.org/debian bookworm-updates/main Translation-en [5,204 B] Get:12 http://archive.raspberrypi.com/debian bookworm/main armhf Packages [346 k B] Get:13 http://archive.raspberrypi.com/debian bookworm/main arm64 Packages [338 k B] Fetched 1,067 kB in 2s (589 kB/s) Reading package lists... Done N: Repository 'http://archive.raspberrypi.com/debian bookworm InRelease' changed its 'Suite' value from 'testing' to 'stable' ========================================================================== Node.js not found. Installing... ========================================================================== Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Reading package lists... Done Reading package lists... Done Building dependency tree... Done Reading state information... Done ca-certificates is already the newest version (20230311). gnupg is already the newest version (2.2.40-1.1). gnupg set to manually installed. The following packages will be upgraded: curl libcurl3-gnutls libcurl4 3 upgraded, 0 newly installed, 0 to remove and 28 not upgraded. Need to get 1,035 kB of archives. After this operation, 0 B of additional disk space will be used. Get:1 http://deb.debian.org/debian-security bookworm-security/main arm64 curl arm64 7.88.1-10+deb12u4 [308 kB] Get:2 http://deb.debian.org/debian-security bookworm-security/main arm64 libcurl4 arm64 7.88.1-10+deb12u4 [366 kB] Get:3 http://deb.debian.org/debian-security bookworm-security/main arm64 libcurl3-gnutls arm64 7.88.1-10+deb12u4 [361 kB] Fetched 1,035 kB in 0s (3,348 kB/s) apt-listchanges: Reading changelogs... (Reading database ... 55058 files and directories currently installed.) Preparing to unpack .../curl_7.88.1-10+deb12u4_arm64.deb ... Unpacking curl (7.88.1-10+deb12u4) over (7.88.1-10+deb12u3) ... Preparing to unpack .../libcurl4_7.88.1-10+deb12u4_arm64.deb ... Unpacking libcurl4:arm64 (7.88.1-10+deb12u4) over (7.88.1-10+deb12u3) ... Preparing to unpack .../libcurl3-gnutls_7.88.1-10+deb12u4_arm64.deb ... Unpacking libcurl3-gnutls:arm64 (7.88.1-10+deb12u4) over (7.88.1-10+deb12u3) ... Setting up libcurl3-gnutls:arm64 (7.88.1-10+deb12u4) ... Setting up libcurl4:arm64 (7.88.1-10+deb12u4) ... Setting up curl (7.88.1-10+deb12u4) ... Processing triggers for man-db (2.11.2-2) ... Processing triggers for libc-bin (2.36-9+rpt2+deb12u3) ... deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_18.x nodistro main Processing triggers for man-db (2.11.2-2) ...ource1_arm64.deb ...led.) Installed nodejs Node.js Installed successfully! Changing npm registry to https://registry.npmjs.org Processing triggers for man-db (2.11.2-2) ...arm64.deb ... installed.) Installed acl Setting up libavahi-compat-libdnssd-dev:arm64 (0.8-10) ...-10_arm64.deb ... Installed libavahi-compat-libdnssd-dev Processing triggers for man-db (2.11.2-2) ...1) ...1_arm64.deb ...ed.) Installed libudev-dev Processing triggers for libc-bin (2.36-9+rpt2+deb12u3) .....m64.deb ...pt2) ... Installed libpam0g-dev Processing triggers for man-db (2.11.2-2) ...m64.deb ......installed.) Installed git Extracting templates from packages: 100% Setting up libcairo2-dev:arm64 (1.16.0-7+rpt1) ....u3) ...t1) .........rm64.deb ... Installed libcairo2-dev Processing triggers for libc-bin (2.36-9+rpt2+deb12u3) ...m64.deb ... .... Installed libpango1.0-dev Setting up libjpeg-dev:arm64 (1:2.1.5-2) ...5-2) ...4.deb ....deb ...) Installed libjpeg-dev Processing triggers for libc-bin (2.36-9+rpt2+deb12u3) ... installed.) Installed libgif-dev Processing triggers for libgdk-pixbuf-2.0-0:arm64 (2.42.10+dfsg-1+b1) .......... Installed librsvg2-dev Processing triggers for libc-bin (2.36-9+rpt2+deb12u3) .....nstalled.) Installed cmake ========================================================================== Creating ioBroker user and directory (2/4) ========================================================================== User iobroker created Created /etc/sudoers.d/iobroker Directory /opt/iobroker created ========================================================================== Installing ioBroker (3/4) ========================================================================== ========================================================================== Finalizing installation (4/4) ========================================================================== Enabling autostart... Created symlink /etc/systemd/system/multi-user.target.wants/iobroker.service → /lib/systemd/system/iobroker.service. Autostart enabled! Fixing directory permissions... ========================================================================== ioBroker was installed successfully Open http://192.168.1.59:8081 in a browser and start configuring! ========================================================================== You need to re-login before doing anything else on the console! brokerer@Pi4-iOMaster1:~ $ ^C brokerer@Pi4-iOMaster1:~ $ iobroker multihost enable Multihost discovery server activated on this host. If iobroker is currently not running please start befeore trying to discover this host. Important: Multihost discovery works with UDP packets. Make sure they are routed correctly in your network. If you use Docker you also need to configure this correctly. Multihost discovery will be automatically deactivated after 15 minutes. If you want to activate it permanently use the --persist flag Discovery authentication activated. Enter secret phrase for connection: Repeat secret phrase for connection: Changing objects server to accept connections on all IP addresses. Changing states server to accept connections on all IP addresses. Please restart ioBroker for the changes to take effect: "iobroker restart" Multihost discovery server: enabled Discovery authentication: enabled Persistent activation: disabled Objects: jsonl on 0.0.0.0 States: jsonl on 0.0.0.0Verlauf vom Slave:
login as: brokerer brokerer@192.168.1.62's password: Linux Pi4-iOSlave1 6.1.0-rpi4-rpi-v8 #1 SMP PREEMPT Debian 1:6.1.54-1+rpt2 (2023 -10-05) aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. brokerer@Pi4-iOSlave1:~ $ vgencmd -bash: vgencmd: command not found brokerer@Pi4-iOSlave1:~ $ curl -sLf https://iobroker.net/install.sh | bash - library: loaded Library version=2023-10-13 ========================================================================== Welcome to the ioBroker installer! Installer version: 2023-10-13 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/4) ========================================================================== Hit:1 http://deb.debian.org/debian bookworm InRelease Get:2 http://deb.debian.org/debian-security bookworm-security InRelease [48.0 kB] Get:3 http://archive.raspberrypi.com/debian bookworm InRelease [23.6 kB] Get:4 http://deb.debian.org/debian bookworm-updates InRelease [52.1 kB] Get:5 http://deb.debian.org/debian-security bookworm-security/main armhf Packages [91.5 kB] Get:6 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages [93.9 kB] Get:7 http://deb.debian.org/debian-security bookworm-security/main Translation-en [54.8 kB] Get:8 http://deb.debian.org/debian-security bookworm-security/contrib Translation-en [372 B] Get:9 http://deb.debian.org/debian bookworm-updates/main armhf Packages [6,648 B] Get:10 http://deb.debian.org/debian bookworm-updates/main arm64 Packages [6,672 B] Get:11 http://deb.debian.org/debian bookworm-updates/main Translation-en [5,204 B] Get:12 http://archive.raspberrypi.com/debian bookworm/main armhf Packages [346 kB] Get:13 http://archive.raspberrypi.com/debian bookworm/main arm64 Packages [338 kB] Fetched 1,067 kB in 2s (617 kB/s) Reading package lists... Done N: Repository 'http://archive.raspberrypi.com/debian bookworm InRelease' changed its 'Suite' value from 'testing' to 'stable' ========================================================================== Node.js not found. Installing... ========================================================================== Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Reading package lists... Done Reading package lists... Done Building dependency tree... Done Reading state information... Done ca-certificates is already the newest version (20230311). gnupg is already the newest version (2.2.40-1.1). gnupg set to manually installed. The following packages will be upgraded: curl libcurl3-gnutls libcurl4 3 upgraded, 0 newly installed, 0 to remove and 28 not upgraded. Need to get 1,035 kB of archives. After this operation, 0 B of additional disk space will be used. Get:1 http://deb.debian.org/debian-security bookworm-security/main arm64 curl arm64 7.88.1-10+deb12u4 [308 kB] Get:2 http://deb.debian.org/debian-security bookworm-security/main arm64 libcurl4 arm64 7.88.1-10+deb12u4 [366 kB] Get:3 http://deb.debian.org/debian-security bookworm-security/main arm64 libcurl3-gnutls arm64 7.88.1-10+deb12u4 [361 kB] Fetched 1,035 kB in 0s (3,272 kB/s) apt-listchanges: Reading changelogs... (Reading database ... 55058 files and directories currently installed.) Preparing to unpack .../curl_7.88.1-10+deb12u4_arm64.deb ... Unpacking curl (7.88.1-10+deb12u4) over (7.88.1-10+deb12u3) ... Preparing to unpack .../libcurl4_7.88.1-10+deb12u4_arm64.deb ... Unpacking libcurl4:arm64 (7.88.1-10+deb12u4) over (7.88.1-10+deb12u3) ... Preparing to unpack .../libcurl3-gnutls_7.88.1-10+deb12u4_arm64.deb ... Unpacking libcurl3-gnutls:arm64 (7.88.1-10+deb12u4) over (7.88.1-10+deb12u3) ... Setting up libcurl3-gnutls:arm64 (7.88.1-10+deb12u4) ... Setting up libcurl4:arm64 (7.88.1-10+deb12u4) ... Setting up curl (7.88.1-10+deb12u4) ... Processing triggers for man-db (2.11.2-2) ... Processing triggers for libc-bin (2.36-9+rpt2+deb12u3) ... deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_18.x nodistro main Processing triggers for man-db (2.11.2-2) ...ource1_arm64.deb ...led.) Installed nodejs Node.js Installed successfully! Changing npm registry to https://registry.npmjs.org Processing triggers for man-db (2.11.2-2) ...arm64.deb ... installed.) Installed acl Setting up libavahi-compat-libdnssd-dev:arm64 (0.8-10) ...-10_arm64.deb ... Installed libavahi-compat-libdnssd-dev Processing triggers for man-db (2.11.2-2) ...1) ...1_arm64.deb ...ed.) Installed libudev-dev Processing triggers for libc-bin (2.36-9+rpt2+deb12u3) .....m64.deb ...pt2) ... Installed libpam0g-dev Processing triggers for man-db (2.11.2-2) ...m64.deb ......installed.) Installed git Extracting templates from packages: 100% Setting up libcairo2-dev:arm64 (1.16.0-7+rpt1) ....u3) ...t1) .........rm64.deb ... Installed libcairo2-dev Processing triggers for libc-bin (2.36-9+rpt2+deb12u3) ...m64.deb ... .... Installed libpango1.0-dev Setting up libjpeg-dev:arm64 (1:2.1.5-2) ...5-2) ...4.deb ....deb ...) Installed libjpeg-dev Processing triggers for libc-bin (2.36-9+rpt2+deb12u3) ... installed.) Installed libgif-dev Processing triggers for libgdk-pixbuf-2.0-0:arm64 (2.42.10+dfsg-1+b1) .......... Installed librsvg2-dev Processing triggers for libc-bin (2.36-9+rpt2+deb12u3) .....nstalled.) Installed cmake ========================================================================== Creating ioBroker user and directory (2/4) ========================================================================== User iobroker created Created /etc/sudoers.d/iobroker Directory /opt/iobroker created ========================================================================== Installing ioBroker (3/4) ========================================================================== ========================================================================== Finalizing installation (4/4) ========================================================================== Enabling autostart... Created symlink /etc/systemd/system/multi-user.target.wants/iobroker.service → /lib/systemd/system/iobroker.service. Autostart enabled! Fixing directory permissions... ========================================================================== ioBroker was installed successfully Open http://192.168.1.62:8081 in a browser and start configuring! ========================================================================== You need to re-login before doing anything else on the console! brokerer@Pi4-iOSlave1:~ $ ^C brokerer@Pi4-iOSlave1:~ $ iobroker multihost connect(so sieht es seit ~10 min. aus)
beide Pis hängen im WLAN an der selben Fritzbox.... hat jemand eine Idee wo es hier klemmen könnte?
1000 Dank vorab. -
jeweils 5.0.12
node.js 18.18.2
npm 9.8.1hier mal ne volle diag vom Master
======== Start marking the full check here =========
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: Pi4-iOMaster1 Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi4-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 18:04:44 up 31 min, 2 users, load average: 0.10, 0.10, 0.27 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Sat 2023-11-11 18:04:44 CET Universal time: Sat 2023-11-11 17:04:44 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** brokerer /home/brokerer brokerer adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 419M 2.0G 1.2M 1.6G 3.6G Swap: 104M 0B 104M Total: 4.1G 419M 2.1G 3793 M total memory 400 M used memory 441 M active memory 1240 M inactive memory 1925 M free memory 75 M buffer memory 1468 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.1M 379M 1% /run /dev/mmcblk0p2 ext4 29G 2.7G 25G 10% / tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 61M 450M 12% /boot/firmware tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sat Nov 11 17:33:21 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:49:32:4D vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=71269729-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE [Sat Nov 11 17:33:24 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Sat Nov 11 17:33:26 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 497M /var/ 202M /var/cache 197M /var/cache/apt 159M /var/lib 131M /var/lib/apt/lists Archived and active journals take up 36.0M in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 19M /opt/iobroker/iobroker-data/ 15M /opt/iobroker/iobroker-data/files 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static 13M /opt/iobroker/iobroker-data/files/admin.admin/custom The five largest files in iobroker-data are: 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 3.8M /opt/iobroker/iobroker-data/objects.jsonl 2.8M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js 1.6M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map 652K /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_index_js.40e01f69.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.18.2 /usr/bin/node v18.18.2 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 nodejs: Installed: 18.18.2-1nodesource1 Candidate: 18.18.2-1nodesource1 Version table: *** 18.18.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.12 admin: 6.10.1 javascript: "javascript" not found Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : Pi4-iOMaster1 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : Pi4-iOMaster1 - enabled + system.adapter.discovery.0 : discovery : Pi4-iOMaster1 - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Pi4-iOMaster1 - enabled, port: 8081, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.10.1 [Updatable] Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "discovery" : 3.1.0 , installed 3.1.0 Controller "js-controller": 5.0.12 , installed 5.0.12 Objects and States Please stand by - This may take a while Objects: 143 States: 102 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 16 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 45404 9443/iobroker.js-co tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 45429 9443/iobroker.js-co tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 1980 732/sshd: /usr/sbin tcp6 0 0 :::22 :::* LISTEN 0 1982 732/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 45494 9538/io.admin.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 3849 529/avahi-daemon: r udp 0 0 0.0.0.0:47659 0.0.0.0:* 104 3851 529/avahi-daemon: r udp 0 0 0.0.0.0:50005 0.0.0.0:* 1001 46412 9443/iobroker.js-co udp6 0 0 :::5353 :::* 104 3850 529/avahi-daemon: r udp6 0 0 :::54596 :::* 104 3852 529/avahi-daemon: r udp6 0 0 fe80::f6d7:f374:12f:546 :::* 0 4079 598/NetworkManager *** Log File - Last 25 Lines *** 2023-11-11 17:48:15.787 - info: host.Pi4-iOMaster1 ip addresses: 2023-11-11 17:48:16.276 - info: host.Pi4-iOMaster1 connected to Objects and States 2023-11-11 17:48:16.310 - info: host.Pi4-iOMaster1 Node.js version has changed from unknown to 18.18.2 2023-11-11 17:48:16.365 - info: host.Pi4-iOMaster1 Successfully updated capabilities "cap_net_admin, cap_net_bind_service, cap_net_raw" for /usr/bin/node 2023-11-11 17:48:16.385 - info: host.Pi4-iOMaster1 added notifications configuration of host 2023-11-11 17:48:16.872 - info: host.Pi4-iOMaster1 3 instances found 2023-11-11 17:48:16.884 - info: host.Pi4-iOMaster1 starting 3 instances 2023-11-11 17:48:16.976 - info: host.Pi4-iOMaster1 instance system.adapter.admin.0 started with pid 9538 2023-11-11 17:48:19.644 - info: admin.0 (9538) starting. Version 6.10.1 in /opt/iobroker/node_modules/iobroker.admin, node: v18.18.2, js-controller: 5.0.12 2023-11-11 17:48:19.705 - info: admin.0 (9538) requesting all objects 2023-11-11 17:48:19.892 - info: admin.0 (9538) received all objects 2023-11-11 17:48:20.017 - info: admin.0 (9538) socket.io server listening on port 8081 2023-11-11 17:48:20.022 - info: admin.0 (9538) http server listening on port 8081 2023-11-11 17:48:20.023 - info: admin.0 (9538) Use link "http://127.0.0.1:8081" to configure. 2023-11-11 17:48:20.176 - warn: admin.0 (9538) Repository cannot be read: Active repo - stable 2023-11-11 17:48:20.178 - warn: admin.0 (9538) Active repository "stable" cannot be read 2023-11-11 17:48:20.345 - error: admin.0 (9538) Cannot update news: TypeError: newNews.forEach is not a function 2023-11-11 17:48:20.923 - info: host.Pi4-iOMaster1 instance system.adapter.discovery.0 started with pid 9561 2023-11-11 17:48:23.146 - info: discovery.0 (9561) starting. Version 3.1.0 in /opt/iobroker/node_modules/iobroker.discovery, node: v18.18.2, js-controller: 5.0.12 2023-11-11 17:48:24.932 - info: host.Pi4-iOMaster1 instance system.adapter.backitup.0 started with pid 9580 2023-11-11 17:48:27.180 - info: backitup.0 (9580) starting. Version 2.8.7 in /opt/iobroker/node_modules/iobroker.backitup, node: v18.18.2, js-controller: 5.0.12 2023-11-11 17:48:27.273 - info: backitup.0 (9580) [iobroker] backup will be activated at 02:40 every 1 day(s) 2023-11-11 17:49:40.201 - info: admin.0 (9538) ==> Connected system.user.admin from ::ffff:192.168.1.103 2023-11-11 17:49:40.382 - info: host.Pi4-iOMaster1 Updating repository "stable" under "http://download.iobroker.net/sources-dist.json" 2023-11-11 17:51:03.484 - info: host.Pi4-iOMaster1 Multi-host discovery server: service started on 0.0.0.0:50005 ============ Mark until here for C&P ============= iob diag has finished. Press any key for a summary -
@meister-mopper said in Multihosteinrichtung funktioniert nicht!:
Welcher js-controller?
OT: wlan ist auch keine gute Idee.
mein "echter" Master hängt auch an der Leine. Vor nem Crash hatte ich nen Slave im Wlan im Garten um die Flowercare zu überwachen. Lief meherere Jahre ohne Probleme.
-
@albyricus sagte in Multihosteinrichtung funktioniert nicht!:
jeweils 5.0.12
Schau mal hier,
https://forum.iobroker.net/post/1055387
https://forum.iobroker.net/topic/68802/gelöst-hilfe-bei-multihost
da scheint es bei Neuinstallationen einen Bug zu geben.Bestehende Multihost-Umgebungen (habe ich) betrifft es wohl nicht.
Proxmox und HA
-
@albyricus sagte in Multihosteinrichtung funktioniert nicht!:
jeweils 5.0.12
Schau mal hier,
https://forum.iobroker.net/post/1055387
https://forum.iobroker.net/topic/68802/gelöst-hilfe-bei-multihost
da scheint es bei Neuinstallationen einen Bug zu geben.Bestehende Multihost-Umgebungen (habe ich) betrifft es wohl nicht.
@meister-mopper
thx... hatte ich noch nicht gelesen! -
@albyricus sagte in Multihosteinrichtung funktioniert nicht!:
jeweils 5.0.12
Schau mal hier,
https://forum.iobroker.net/post/1055387
https://forum.iobroker.net/topic/68802/gelöst-hilfe-bei-multihost
da scheint es bei Neuinstallationen einen Bug zu geben.Bestehende Multihost-Umgebungen (habe ich) betrifft es wohl nicht.
@meister-mopper sagte in Multihosteinrichtung funktioniert nicht!:
da scheint es bei Neuinstallationen einen Bug zu geben.
.... muss wohl heute ein Flat sein ..Synology 918+ 16GB - ioBroker in Docker v9 , VISO auf Trekstor Primebook C13 13,3" , Hikvision Domkameras mit Surveillance Station .. CCU RaspberryMatic in Synology VM .. Zigbee CC2538+CC2592 .. Sonoff .. KNX .. Modbus ..
-
@meister-mopper sagte in Multihosteinrichtung funktioniert nicht!:
da scheint es bei Neuinstallationen einen Bug zu geben.
.... muss wohl heute ein Flat sein ..@glasfaser sagte in Multihosteinrichtung funktioniert nicht!:
muss wohl heute ein Flat sein
Ist doch immer, wenn ein neues Phänomen auftritt. Es sind verständlicherweise nicht alle Vielleser
.
225
Online32.4k
Users81.3k
Topics1.3m
Posts