Neuer ioBroker-Blog online: Monatsrückblick März/April 2026

[mdumbsky]

@ostseereiter

Entschuldige die späte Antwort, bin leider im Moment selten hier.
Ich ändere einfach dynamisch zur Laufzeit die Hintergrundfarbe für das Widget (vis-inventwo-Value List), mit dem ich auch die Texte im AMS anzeige.
Hier z.B. der Eintrag für das AMS0, 1. Slot:
{0_userdata.0.vis.BambuLab.AMS.0.Farbe_Tray_0}
AMS0, 2. Slot:
0_userdata.0.vis.BambuLab.AMS.0.Farbe_Tray_1}
Die dynamische Farbänderung funktioniert also über Bindings, direkt zwischen dem entsprechenden Datenpunkt (aktuelle Farbe des AMS und Slots) und der Vorgabe zur Hintergrundfarbe des Widgets (gelbe Markierung im Bild.)
Bitte beachten: Die geschweiften Klammern gehören dazu, ohne funktioniert es nicht.
Damit der Text immer lesbar bleibt, (kein schwarzer Text auf schwarzem Filament) ändere ich auch die Textfarbe dynamisch zur Laufzeit:
{0_userdata.0.vis.BambuLab.AMS.0.Schriftfarbe_Tray_0}
Dieses Binding gehört in die Textfarbe des Widgets (orange Markierung).

Die entsprechenden Blocklys zur Farbänderung und die dazugehörigen Datenpunkte findest Du in meinem ursprünglichen Post.

Ein schönes Wochenende.

Gruß
Michael

[ostseereiter]

@mdumbsky sagte in Zeigt her eure Bambu Lab Vis:

vis-inventwo-

danke ich habe es hinbekommen.Mein Fehler war ich hatte den Adapter vis-inventwo nicht installiert.

[Eggi]

@skvarel
Hallo
Deine VIS vom P1S gefällt mir sehr gut.
Darf ich diese Verwenden? Wenn ja, bitte um Deine View (und alles was dazugehört)
Vielen Dank im Voraus

[wolfgangkt]

Das wäre meine.

[Eggi]

@wolfgangkt
Hallo Wolgang
Darf ich bitte Deine VIS verwebden?!
Danke im Voraus.

[wolfgangkt]

@eggi
kann die Vis-Seite gerne zu Verfügung stellen.
Sind aber auch sehr viele Blockly-Skripte dahinter.

[Eggi]

@wolfgangkt
...Blockly-Scripte sind kein Problem - ich pick mir raus, was ich für meine Zwecke brauche (um das Rad nicht neu erfinden zu müssen)
Danke im Voraus

[wolfgangkt]

@eggi
ok, dann hier Bambu.zip

[helfi9999]

Hallo zusammen, habe hier meine Bambulab VIS:

Habe dieses Skript

Spoiler

/***********************

• BambuLab AMS MINIMAL + TEMP + PRINT + MEROSS
  ***********************/
  const printerId = '01S00C321500283';

const baseBambu = bambulab.0.${printerId};
const baseTray = ${baseBambu}.ams.ams.0.tray;

const baseAMS = '0_userdata.0.Bambulab.AMS';
const baseTemp = '0_userdata.0.Bambulab.Temp';
const basePrint = '0_userdata.0.Bambulab.Print';

const merossId = 'meross.0.2303167546755151200348e1e9beebff.0';
const adapterId = 'system.adapter.bambulab.0';

const trayNowId = ${baseBambu}.ams.tray_now;

const trayCount = 4;
const defaultColor = '#D3D3D3';
const refreshMs = 10000;

const tempSources = {
bedActual: ${baseBambu}.bed_temper,
bedTarget: ${baseBambu}.bed_target_temper,
nozzleActual: ${baseBambu}.nozzle_temper,
nozzleTarget: ${baseBambu}.nozzle_target_temper
};

const printSources = {
percent: ${baseBambu}.mc_percent,
file: ${baseBambu}.gcode_file,
state: ${baseBambu}.gcode_state,
remaining: ${baseBambu}.mc_remaining_time
};

function create(id, def, type = null, role = 'state') {
if (!existsState(id)) {
createState(id, {
name: id.split('.').pop(),
type: type || typeof def,
role,
read: true,
write: true,
def
}, () => setState(id, def, true));
}
}

function get(id) {
return getState(id)?.val;
}

function set(id, val) {
if (getState(id)?.val !== val) {
setState(id, val, true);
}
}

function normalizeColor(raw) {
let c = String(raw ?? '').replace('#', '').trim();
c = c.replace(/[^0-9A-Fa-f]/g, '');

if (c.length === 8) return `#${c.substring(0, 6)}`.toUpperCase();
if (c.length === 6) return `#${c}`.toUpperCase();

return defaultColor;

}

function parseFilament(type, brand) {
const text = ${type ?? ''} ${brand ?? ''}.toUpperCase();

let material = 'UNKNOWN';

if (text.includes('PLA')) material = 'PLA';
else if (text.includes('PETG')) material = 'PETG';
else if (text.includes('ABS')) material = 'ABS';
else if (text.includes('ASA')) material = 'ASA';
else if (text.includes('TPU')) material = 'TPU';
else if (text.includes('NYLON') || text.includes('PA')) material = 'PA';
else if (text.includes('PC')) material = 'PC';

let variant = String(brand ?? '').trim();

if (material !== 'UNKNOWN') {
    variant = variant
        .replace(new RegExp(material, 'gi'), '')
        .replace(/BAMBU|LAB|FILAMENT/gi, '')
        .trim();
}

const u = variant.toUpperCase();

if (u.includes('MATTE')) variant = 'Matte';
else if (u.includes('BASIC')) variant = 'Basic';
else if (u.includes('SILK')) variant = 'Silk';
else if (u.includes('+') || u.includes('PLUS')) variant = '+';
else if (u.includes('PRO')) variant = 'Pro';
else if (u.includes('TOUGH')) variant = 'Tough';
else if (u.includes('CF') || u.includes('CARBON')) variant = 'CF';
else if (u.includes('WOOD')) variant = 'Wood';
else if (u.includes('METAL')) variant = 'Metal';
else if (u.includes('GLOW')) variant = 'Glow';
else if (u.includes('TRANSPARENT') || u.includes('TRANS')) variant = 'Transparent';
else if (u.includes('SUPPORT')) variant = 'Support';

return { material, variant };

}

function formatTemp(v) {
const n = Number(v);
return isNaN(n) ? '-- °C' : ${Math.floor(n)} °C;
}

function parseRemaining(value) {
if (value === null || value === undefined || value === '') return 0;

const s = String(value).trim();

const hm = s.match(/^(\d+):(\d+)$/);
if (hm) return Number(hm[1]) * 60 + Number(hm[2]);

if (!isNaN(Number(s))) return Number(s);

return 0;

}

function formatRemaining(value) {
const minutes = parseRemaining(value);
if (minutes <= 0) return '--';

const h = Math.floor(minutes / 60);
const m = Math.floor(minutes % 60);

return h > 0 ? `${h}h ${m}m` : `${m} min`;

}

function finishTime(value) {
const minutes = parseRemaining(value);
if (minutes <= 0) return '--';

const end = new Date(Date.now() + minutes * 60000);

return end.toLocaleTimeString('de-DE', {
    hour: '2-digit',
    minute: '2-digit'
});

}

function createStates() {
create(${baseAMS}.Aktiver_Tray, 255, 'number', 'value');
create(${baseAMS}.Farbe_aktiv, defaultColor, 'string', 'value.color');

for (let i = 0; i < trayCount; i++) {
    create(`${baseAMS}.Farbe_Tray_${i}`, defaultColor, 'string', 'value.color');
    create(`${baseAMS}.Werte_Tray_${i}`, '', 'string', 'text');
}

create(`${baseTemp}.Ist_Druckbett`, '-- °C', 'string', 'text');
create(`${baseTemp}.Soll_Druckbett`, '-- °C', 'string', 'text');
create(`${baseTemp}.Ist_Duese`, '-- °C', 'string', 'text');
create(`${baseTemp}.Soll_Duese`, '-- °C', 'string', 'text');

create(`${basePrint}.Fortschritt`, 0, 'number', 'value');
create(`${basePrint}.Datei`, '', 'string', 'text');
create(`${basePrint}.Status`, 'BEREIT', 'string', 'text');
create(`${basePrint}.Restzeit`, '--', 'string', 'text');
create(`${basePrint}.Fertig_um`, '--', 'string', 'text');

}

function updateAMS() {
const trayNow = Number(get(trayNowId));

for (let i = 0; i < trayCount; i++) {
    const type = get(`${baseTray}.${i}.tray_type`);
    const brand = get(`${baseTray}.${i}.tray_sub_brands`);
    const color = normalizeColor(get(`${baseTray}.${i}.tray_color`));
    const f = parseFilament(type, brand);

    set(`${baseAMS}.Farbe_Tray_${i}`, color);
    set(`${baseAMS}.Werte_Tray_${i}`, `${f.material};\n${f.variant || ''}`);
}

if (!isNaN(trayNow) && trayNow >= 0 && trayNow < trayCount) {
    set(`${baseAMS}.Aktiver_Tray`, trayNow);
    set(`${baseAMS}.Farbe_aktiv`, get(`${baseAMS}.Farbe_Tray_${trayNow}`) || defaultColor);
} else {
    set(`${baseAMS}.Aktiver_Tray`, 255);
    set(`${baseAMS}.Farbe_aktiv`, defaultColor);
}

}

function updateTemp() {
set(${baseTemp}.Ist_Druckbett, formatTemp(get(tempSources.bedActual)));
set(${baseTemp}.Soll_Druckbett, formatTemp(get(tempSources.bedTarget)));
set(${baseTemp}.Ist_Duese, formatTemp(get(tempSources.nozzleActual)));
set(${baseTemp}.Soll_Duese, formatTemp(get(tempSources.nozzleTarget)));
}

function updatePrint() {
const percent = Number(get(printSources.percent)) || 0;
const file = String(get(printSources.file) ?? '');
const rawState = String(get(printSources.state) ?? '').toUpperCase();
const remainingRaw = get(printSources.remaining);
const remaining = parseRemaining(remainingRaw);

let status = rawState || 'BEREIT';

if (remaining > 0 && percent > 0 && percent < 100) {
    status = 'DRUCKT';
} else if (percent >= 100) {
    status = 'FERTIG';
} else if (
    rawState.includes('FAIL') ||
    rawState.includes('CANCEL') ||
    rawState.includes('ABORT')
) {
    status = 'ABGEBROCHEN';
} else if (remaining <= 0 && percent <= 0) {
    status = 'BEREIT';
}

set(`${basePrint}.Status`, status);

if (status === 'DRUCKT') {
    set(`${basePrint}.Fortschritt`, percent);
    set(`${basePrint}.Datei`, file);
    set(`${basePrint}.Restzeit`, formatRemaining(remainingRaw));
    set(`${basePrint}.Fertig_um`, finishTime(remainingRaw));
} else {
    set(`${basePrint}.Fortschritt`, 0);
    set(`${basePrint}.Datei`, '');
    set(`${basePrint}.Restzeit`, '--');
    set(`${basePrint}.Fertig_um`, '--');
}

}

function updateAll() {
updateAMS();
updateTemp();
updatePrint();
}

on({ id: merossId, change: 'any' }, obj => {
const isOn = obj.state.val === true || obj.state.val === 1 || obj.state.val === 'true';

setState(`${adapterId}.alive`, isOn);

if (isOn) {
    setTimeout(updateAll, 8000);
}

});

on({
id: [
trayNowId,
new RegExp(^bambulab\\.0\\.${printerId}\\.ams\\.ams\\.0\\.tray\\.[0-3]\\.)
],
change: 'any'
}, updateAMS);

on({
id: Object.values(tempSources),
change: 'any'
}, updateTemp);

on({
id: Object.values(printSources),
change: 'any'
}, updatePrint);

createStates();

setTimeout(updateAll, 3000);
setInterval(updateAll, refreshMs);

Der Drucker wird über Steckdose von Meross gestartet zugleich wird der bambulab.adapter mit gestartet (da der Adapter sonst Meldungen macht wenn der Drucker ausgeschaltet ist im Log). Das Skript liest die Farben aus etc.

[helfi9999]

@mdumbsky Hi habe ein wenig deine Blckly Skripte geändert in Java Skript vielleicht ist das was für dich:

Spoiler

/***********************
* BambuLab AMS MINIMAL + TEMP + PRINT + MEROSS
***********************/
const printerId = '01S00C321500283';

const baseBambu = `bambulab.0.${printerId}`;
const baseTray  = `${baseBambu}.ams.ams.0.tray`;

const baseAMS   = '0_userdata.0.Bambulab.AMS';
const baseTemp  = '0_userdata.0.Bambulab.Temp';
const basePrint = '0_userdata.0.Bambulab.Print';

const merossId  = 'meross.0.2303167546755151200348e1e9beebff.0';
const adapterId = 'system.adapter.bambulab.0';

const trayNowId = `${baseBambu}.ams.tray_now`;

const trayCount = 4;
const defaultColor = '#D3D3D3';
const refreshMs = 10000;

const tempSources = {
   bedActual: `${baseBambu}.bed_temper`,
   bedTarget: `${baseBambu}.bed_target_temper`,
   nozzleActual: `${baseBambu}.nozzle_temper`,
   nozzleTarget: `${baseBambu}.nozzle_target_temper`
};

const printSources = {
   percent: `${baseBambu}.mc_percent`,
   file: `${baseBambu}.gcode_file`,
   state: `${baseBambu}.gcode_state`,
   remaining: `${baseBambu}.mc_remaining_time`
};

function create(id, def, type = null, role = 'state') {
   if (!existsState(id)) {
       createState(id, {
           name: id.split('.').pop(),
           type: type || typeof def,
           role,
           read: true,
           write: true,
           def
       }, () => setState(id, def, true));
   }
}

function get(id) {
   return getState(id)?.val;
}

function set(id, val) {
   if (getState(id)?.val !== val) {
       setState(id, val, true);
   }
}

function normalizeColor(raw) {
   let c = String(raw ?? '').replace('#', '').trim();
   c = c.replace(/[^0-9A-Fa-f]/g, '');

   if (c.length === 8) return `#${c.substring(0, 6)}`.toUpperCase();
   if (c.length === 6) return `#${c}`.toUpperCase();

   return defaultColor;
}

function parseFilament(type, brand) {
   const text = `${type ?? ''} ${brand ?? ''}`.toUpperCase();

   let material = 'UNKNOWN';

   if (text.includes('PLA')) material = 'PLA';
   else if (text.includes('PETG')) material = 'PETG';
   else if (text.includes('ABS')) material = 'ABS';
   else if (text.includes('ASA')) material = 'ASA';
   else if (text.includes('TPU')) material = 'TPU';
   else if (text.includes('NYLON') || text.includes('PA')) material = 'PA';
   else if (text.includes('PC')) material = 'PC';

   let variant = String(brand ?? '').trim();

   if (material !== 'UNKNOWN') {
       variant = variant
           .replace(new RegExp(material, 'gi'), '')
           .replace(/BAMBU|LAB|FILAMENT/gi, '')
           .trim();
   }

   const u = variant.toUpperCase();

   if (u.includes('MATTE')) variant = 'Matte';
   else if (u.includes('BASIC')) variant = 'Basic';
   else if (u.includes('SILK')) variant = 'Silk';
   else if (u.includes('+') || u.includes('PLUS')) variant = '+';
   else if (u.includes('PRO')) variant = 'Pro';
   else if (u.includes('TOUGH')) variant = 'Tough';
   else if (u.includes('CF') || u.includes('CARBON')) variant = 'CF';
   else if (u.includes('WOOD')) variant = 'Wood';
   else if (u.includes('METAL')) variant = 'Metal';
   else if (u.includes('GLOW')) variant = 'Glow';
   else if (u.includes('TRANSPARENT') || u.includes('TRANS')) variant = 'Transparent';
   else if (u.includes('SUPPORT')) variant = 'Support';

   return { material, variant };
}

function formatTemp(v) {
   const n = Number(v);
   return isNaN(n) ? '-- °C' : `${Math.floor(n)} °C`;
}

function parseRemaining(value) {
   if (value === null || value === undefined || value === '') return 0;

   const s = String(value).trim();

   const hm = s.match(/^(\d+):(\d+)$/);
   if (hm) return Number(hm[1]) * 60 + Number(hm[2]);

   if (!isNaN(Number(s))) return Number(s);

   return 0;
}

function formatRemaining(value) {
   const minutes = parseRemaining(value);
   if (minutes <= 0) return '--';

   const h = Math.floor(minutes / 60);
   const m = Math.floor(minutes % 60);

   return h > 0 ? `${h}h ${m}m` : `${m} min`;
}

function finishTime(value) {
   const minutes = parseRemaining(value);
   if (minutes <= 0) return '--';

   const end = new Date(Date.now() + minutes * 60000);

   return end.toLocaleTimeString('de-DE', {
       hour: '2-digit',
       minute: '2-digit'
   });
}

function createStates() {
   create(`${baseAMS}.Aktiver_Tray`, 255, 'number', 'value');
   create(`${baseAMS}.Farbe_aktiv`, defaultColor, 'string', 'value.color');

   for (let i = 0; i < trayCount; i++) {
       create(`${baseAMS}.Farbe_Tray_${i}`, defaultColor, 'string', 'value.color');
       create(`${baseAMS}.Werte_Tray_${i}`, '', 'string', 'text');
   }

   create(`${baseTemp}.Ist_Druckbett`, '-- °C', 'string', 'text');
   create(`${baseTemp}.Soll_Druckbett`, '-- °C', 'string', 'text');
   create(`${baseTemp}.Ist_Duese`, '-- °C', 'string', 'text');
   create(`${baseTemp}.Soll_Duese`, '-- °C', 'string', 'text');

   create(`${basePrint}.Fortschritt`, 0, 'number', 'value');
   create(`${basePrint}.Datei`, '', 'string', 'text');
   create(`${basePrint}.Status`, 'BEREIT', 'string', 'text');
   create(`${basePrint}.Restzeit`, '--', 'string', 'text');
   create(`${basePrint}.Fertig_um`, '--', 'string', 'text');
}

function updateAMS() {
   const trayNow = Number(get(trayNowId));

   for (let i = 0; i < trayCount; i++) {
       const type = get(`${baseTray}.${i}.tray_type`);
       const brand = get(`${baseTray}.${i}.tray_sub_brands`);
       const color = normalizeColor(get(`${baseTray}.${i}.tray_color`));
       const f = parseFilament(type, brand);

       set(`${baseAMS}.Farbe_Tray_${i}`, color);
       set(`${baseAMS}.Werte_Tray_${i}`, `${f.material};\n${f.variant || ''}`);
   }

   if (!isNaN(trayNow) && trayNow >= 0 && trayNow < trayCount) {
       set(`${baseAMS}.Aktiver_Tray`, trayNow);
       set(`${baseAMS}.Farbe_aktiv`, get(`${baseAMS}.Farbe_Tray_${trayNow}`) || defaultColor);
   } else {
       set(`${baseAMS}.Aktiver_Tray`, 255);
       set(`${baseAMS}.Farbe_aktiv`, defaultColor);
   }
}

function updateTemp() {
   set(`${baseTemp}.Ist_Druckbett`, formatTemp(get(tempSources.bedActual)));
   set(`${baseTemp}.Soll_Druckbett`, formatTemp(get(tempSources.bedTarget)));
   set(`${baseTemp}.Ist_Duese`, formatTemp(get(tempSources.nozzleActual)));
   set(`${baseTemp}.Soll_Duese`, formatTemp(get(tempSources.nozzleTarget)));
}

function updatePrint() {
   const percent = Number(get(printSources.percent)) || 0;
   const file = String(get(printSources.file) ?? '');
   const rawState = String(get(printSources.state) ?? '').toUpperCase();
   const remainingRaw = get(printSources.remaining);
   const remaining = parseRemaining(remainingRaw);

   let status = rawState || 'BEREIT';

   if (remaining > 0 && percent > 0 && percent < 100) {
       status = 'DRUCKT';
   } else if (percent >= 100) {
       status = 'FERTIG';
   } else if (
       rawState.includes('FAIL') ||
       rawState.includes('CANCEL') ||
       rawState.includes('ABORT')
   ) {
       status = 'ABGEBROCHEN';
   } else if (remaining <= 0 && percent <= 0) {
       status = 'BEREIT';
   }

   set(`${basePrint}.Status`, status);

   if (status === 'DRUCKT') {
       set(`${basePrint}.Fortschritt`, percent);
       set(`${basePrint}.Datei`, file);
       set(`${basePrint}.Restzeit`, formatRemaining(remainingRaw));
       set(`${basePrint}.Fertig_um`, finishTime(remainingRaw));
   } else {
       set(`${basePrint}.Fortschritt`, 0);
       set(`${basePrint}.Datei`, '');
       set(`${basePrint}.Restzeit`, '--');
       set(`${basePrint}.Fertig_um`, '--');
   }
}

function updateAll() {
   updateAMS();
   updateTemp();
   updatePrint();
}

on({ id: merossId, change: 'any' }, obj => {
   const isOn = obj.state.val === true || obj.state.val === 1 || obj.state.val === 'true';

   setState(`${adapterId}.alive`, isOn);

   if (isOn) {
       setTimeout(updateAll, 8000);
   }
});

on({
   id: [
       trayNowId,
       new RegExp(`^bambulab\\.0\\.${printerId}\\.ams\\.ams\\.0\\.tray\\.[0-3]\\.`)
   ],
   change: 'any'
}, updateAMS);

on({
   id: Object.values(tempSources),
   change: 'any'
}, updateTemp);

on({
   id: Object.values(printSources),
   change: 'any'
}, updatePrint);

createStates();

setTimeout(updateAll, 3000);
setInterval(updateAll, refreshMs);

[stenmic]

ich bin noch nicht ganz fertig, aber so wird meine aussehen.