Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter
-
@glasfaser sagte in Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter:
Was ist mit nur einer RegisterAbfrage ( die anderen löschen ) in der Instanzeinstellung , kommt die gleiche MeldungWas war hiermit
-
@glasfaser siehe 2 Beiträge weiter oben...
"@glasfaser auch mit einem Register noch das gleiche..."
-
@v8turbo sagte in Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter:
"@glasfaser auch mit einem Register noch das gleiche..."
dann würde ich erstmal nur mit einem weitermachen !
Das Problem ist du wechselst immer hin und her .
- Welche aktuellen Einstellungen hast du in der Instanz
- einen aktuellen ioBroker Log mit nur einem Register wo ein Fehler kommt ..
- wird auch der Wert im Datenpunkt geschrieben , ist er auch richtig !?
-
@glasfaser Anbei die aktuellen Werte. Der WR ist auch auf 9600 eingestellt.
Im Holding Register ist jetzt nur ein Eintrag
_address name description unit type len factor offset formula role room poll wp cw isScale 1412 Voltage_PV1 V uint16be 1 0,1 0 state true false false falseAktuelles Log von gerade Ebend.
modbus.0 2023-01-13 07:32:40.268 debug Cleaning up request fifo. modbus.0 2023-01-13 07:32:40.267 debug Clearing timeout of the current request. modbus.0 2023-01-13 07:32:40.263 info Disconnected from slave modbus.0 2023-01-13 07:32:39.566 debug [DevID_2/holdingRegs] Poll address 1412 - 1 registers modbus.0 2023-01-13 07:32:39.565 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 07:32:39.263 warn Poll error count: 2 code: {"err":"timeout","timeout":4000} modbus.0 2023-01-13 07:32:39.262 error Request timed out. modbus.0 2023-01-13 07:32:39.261 warn Error: undefined modbus.0 2023-01-13 07:32:35.291 error Wrong CRC for frame: 255,2,3,2,4,172,254,249 modbus.0 2023-01-13 07:32:35.259 debug [DevID_2/holdingRegs] Poll address 1412 - 1 registers modbus.0 2023-01-13 07:32:35.258 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 07:32:35.255 info Connected to slave modbus.0 2023-01-13 07:32:35.249 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 07:32:29.251 debug Cleaning up request fifo. modbus.0 2023-01-13 07:32:29.250 debug Clearing timeout of the current request. modbus.0 2023-01-13 07:32:29.248 info Disconnected from slave modbus.0 2023-01-13 07:32:28.550 debug [DevID_2/holdingRegs] Poll address 1412 - 1 registers modbus.0 2023-01-13 07:32:28.549 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 07:32:28.248 warn Poll error count: 1 code: {"err":"timeout","timeout":4000} modbus.0 2023-01-13 07:32:28.247 error Request timed out. modbus.0 2023-01-13 07:32:28.246 warn Error: undefined modbus.0 2023-01-13 07:32:24.277 error Wrong CRC for frame: 255,2,3,2,7,173,63,201 modbus.0 2023-01-13 07:32:24.244 debug [DevID_2/holdingRegs] Poll address 1412 - 1 registers modbus.0 2023-01-13 07:32:24.243 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 07:32:23.740 debug [DevID_2/holdingRegs] Poll address 1412 DONE modbus.0 2023-01-13 07:32:23.707 debug [DevID_2/holdingRegs] Poll address 1412 - 1 registers modbus.0 2023-01-13 07:32:23.706 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 07:32:23.704 info Connected to slave modbus.0 2023-01-13 07:32:23.695 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 07:32:17.697 debug Cleaning up request fifo. modbus.0 2023-01-13 07:32:17.696 debug Clearing timeout of the current request. modbus.0 2023-01-13 07:32:17.693 info Disconnected from slave modbus.0 2023-01-13 07:32:16.995 debug [DevID_2/holdingRegs] Poll address 1412 - 1 registers modbus.0 2023-01-13 07:32:16.994 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 07:32:16.693 warn Poll error count: 2 code: {"err":"timeout","timeout":4000} modbus.0 2023-01-13 07:32:16.692 error Request timed out. modbus.0 2023-01-13 07:32:16.690 warn Error: undefined modbus.0 2023-01-13 07:32:12.721 error Wrong CRC for frame: 3,2,4,250,126,199,255,2,3 modbus.0 2023-01-13 07:32:12.688 debug [DevID_2/holdingRegs] Poll address 1412 - 1 registers modbus.0 2023-01-13 07:32:12.687 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 07:32:12.686 info Connected to slave modbus.0 2023-01-13 07:32:12.677 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 07:32:06.678 debug Cleaning up request fifo. modbus.0 2023-01-13 07:32:06.677 debug Clearing timeout of the current request. modbus.0 2023-01-13 07:32:06.675 info Disconnected from slave modbus.0 2023-01-13 07:32:05.976 debug [DevID_2/holdingRegs] Poll address 1412 - 1 registers modbus.0 2023-01-13 07:32:05.975 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 07:32:05.673 warn Poll error count: 1 code: {"err":"timeout","timeout":4000} modbus.0 2023-01-13 07:32:05.673 error Request timed out. modbus.0 2023-01-13 07:32:05.672 warn Error: undefined modbus.0 2023-01-13 07:32:01.668 debug [DevID_2/holdingRegs] Poll address 1412 - 1 registers modbus.0 2023-01-13 07:32:01.667 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 07:32:01.165 debug [DevID_2/holdingRegs] Poll address 1412 DONE modbus.0 2023-01-13 07:32:01.133 debug [DevID_2/holdingRegs] Poll address 1412 - 1 registers modbus.0 2023-01-13 07:32:01.132 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 07:32:00.627 debug [DevID_2/holdingRegs] Poll address 1412 DONE modbus.0 2023-01-13 07:32:00.589 debug [DevID_2/holdingRegs] Poll address 1412 - 1 registers modbus.0 2023-01-13 07:32:00.588 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 07:32:00.587 info Connected to slave modbus.0 2023-01-13 07:32:00.579 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 07:31:54.579 debug Cleaning up request fifo. modbus.0 2023-01-13 07:31:54.578 debug Clearing timeout of the current request. modbus.0 2023-01-13 07:31:54.576 info Disconnected from slave modbus.0 2023-01-13 07:31:53.879 debug [DevID_2/holdingRegs] Poll address 1412 - 1 registers modbus.0 2023-01-13 07:31:53.877 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 07:31:53.576 warn Poll error count: 1 code: {"err":"timeout","timeout":4000} modbus.0 2023-01-13 07:31:53.573 error Request timed out. modbus.0 2023-01-13 07:31:53.572 warn Error: undefined modbus.0 2023-01-13 07:31:49.604 error unknown function code: 0x20, 0xa0 modbus.0 2023-01-13 07:31:49.564 debug [DevID_2/holdingRegs] Poll address 1412 - 1 registers modbus.0 2023-01-13 07:31:49.564 debug Initialization of scale factors done! modbus.0 2023-01-13 07:31:49.562 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 07:31:49.561 info Connected to slave modbus.0 2023-01-13 07:31:49.554 debug connect to serial /dev/ttyUSB0 with 9600 -
Achso die Werte trägt er, auch wenn alle im Holding stehen sporadisch mal ein (siehe Log oben). Also ja die Werte trägt er irgendwann wenn die Connection klappt ein und die stimmen auch.
-
Wenn ich mir den Screenshot ansehe hast du schon einiges an den Grundeinstellungen verbogen.
ich würde mal mit diesen Beginnen:
Also nach Instanz Installation nur den haken bei "Aliases benutzen" raus machen.
Sicherstellen das der WR die gleichen Kommunikationseinstellungen verwendet die im Adapter eingestellt sind. > Baudrate, Data Bits, Stop Bits, Parität, Geräte ID
Im Holding Register nur 1 Register Eintragen bei dem das Ergebnis eindeutig ist:
Z.B. Frequenz HEX=484 DEC=1156 Unsigned 16bit Big Endian Faktor 0.01 Einheit Hz
Dann schauen ob was kommt.
Wenn nicht das Register in Holding löschen und bei Eingangsregister eintragen und testen.
Meine SMA WR haben z.B. Eingangsregister definiert.
-
@wendy2702
Einstellungen sind so gesetzt... Bis auf den Haken bei "Adressen nicht auf 16bit...." der muss rein. (bzw. habe es auch gerade ohne probiert passiert das gleiche)Sicherstellen das der WR die gleichen Kommunikationseinstellungen verwendet die im Adapter eingestellt sind. > Baudrate, Data Bits, Stop Bits, Parität, Geräte ID <- Wie soll ich das machen ? Es gibt nur eine Einstellung im WR und da kann man die BAUD eintragen. Anleitung steht auch nichts...
Holding Register, Eingangsregister kommt die gleiche Meldung im Log (siehe unten)...
modbus.0 2023-01-13 08:37:42.765 debug Plugin sentry Initialize Plugin (enabled=true) modbus.0 2023-01-13 08:40:01.661 debug Cleaning up request fifo. modbus.0 2023-01-13 08:40:01.660 debug Clearing timeout of the current request. modbus.0 2023-01-13 08:40:01.657 info Disconnected from slave modbus.0 2023-01-13 08:40:00.659 warn Poll error count: 3 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 08:40:00.656 error Request timed out. modbus.0 2023-01-13 08:40:00.655 warn Error: undefined modbus.0 2023-01-13 08:39:55.652 debug [DevID_2/inputRegs] Poll address 1412 - 1 registers modbus.0 2023-01-13 08:39:55.651 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:39:55.650 info Connected to slave modbus.0 2023-01-13 08:39:55.643 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 08:38:55.646 debug Cleaning up request fifo. modbus.0 2023-01-13 08:38:55.644 debug Clearing timeout of the current request. modbus.0 2023-01-13 08:38:55.641 info Disconnected from slave modbus.0 2023-01-13 08:38:54.641 warn Poll error count: 2 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 08:38:54.639 error Request timed out. modbus.0 2023-01-13 08:38:54.638 warn Error: undefined modbus.0 2023-01-13 08:38:49.634 debug [DevID_2/inputRegs] Poll address 1412 - 1 registers modbus.0 2023-01-13 08:38:49.633 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:38:49.632 info Connected to slave modbus.0 2023-01-13 08:38:49.623 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 08:37:49.627 debug Cleaning up request fifo. modbus.0 2023-01-13 08:37:49.626 debug Clearing timeout of the current request. modbus.0 2023-01-13 08:37:49.621 info Disconnected from slave modbus.0 2023-01-13 08:37:48.620 warn Poll error count: 1 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 08:37:48.617 error Request timed out. modbus.0 2023-01-13 08:37:48.616 warn Error: undefined modbus.0 2023-01-13 08:37:43.609 debug [DevID_2/inputRegs] Poll address 1412 - 1 registers modbus.0 2023-01-13 08:37:43.608 debug Initialization of scale factors done! modbus.0 2023-01-13 08:37:43.606 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:37:43.605 info Connected to slave modbus.0 2023-01-13 08:37:43.586 debug connect to serial /dev/ttyUSB0 with 9600 -
Hab jetzt mal inverter Temperatur genommen statt PV Voltage... Aber ist ja das gleiche.
OHNE Haken bei Adressen 16bit bla bla...
modbus.0 2023-01-13 08:46:16.526 debug Cleaning up request fifo. modbus.0 2023-01-13 08:46:16.525 debug Clearing timeout of the current request. modbus.0 2023-01-13 08:46:16.522 info Disconnected from slave modbus.0 2023-01-13 08:46:15.521 warn Poll error count: 2 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 08:46:15.520 error Request timed out. modbus.0 2023-01-13 08:46:15.518 warn Error: undefined modbus.0 2023-01-13 08:46:10.587 error unknown function code: 0x20, 0x20 modbus.0 2023-01-13 08:46:10.517 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:46:10.516 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:46:10.516 info Connected to slave modbus.0 2023-01-13 08:46:10.511 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 08:45:10.515 debug Cleaning up request fifo. modbus.0 2023-01-13 08:45:10.514 debug Clearing timeout of the current request. modbus.0 2023-01-13 08:45:10.509 info Disconnected from slave modbus.0 2023-01-13 08:45:09.507 warn Poll error count: 1 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 08:45:09.505 error Request timed out. modbus.0 2023-01-13 08:45:09.504 warn Error: undefined modbus.0 2023-01-13 08:45:04.567 error Error response: 20 modbus.0 2023-01-13 08:45:04.500 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:45:04.499 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:45:03.444 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-13 08:45:03.405 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:45:03.404 debug Initialization of scale factors done! modbus.0 2023-01-13 08:45:03.402 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:45:03.401 info Connected to slave modbus.0 2023-01-13 08:45:03.387 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 08:45:03.069 debug Add holdingRegisters.1056_Temperature_Inv1: {"_id":"holdingRegisters.1056_Temperature_Inv1","type":"state","common":{"name":"","role":"state","type":"number","read":true,"write":true,"def":0,"unit":"°C"},"native":{"regType":"holdingRegs","address":1056,"deviceId":2,"type":"int16be","len":1,"offset":0,"factor":1,"poll":true}} modbus.0 2023-01-13 08:45:03.068 debug Initialize Objects for holdingRegs: [{"_address":"1056","name":"Temperature_Inv1","description":"","unit":"°C","type":"int16be","len":1,"factor":1,"offset":0,"formula":"","role":"state","room":"","poll":true,"wp":false,"cw":false,"isScale":false,"deviceId":2,"address":1056,"id":"holdingRegisters.1056_Temperature_Inv1"}] modbus.0 2023-01-13 08:45:03.068 debug Initialize Objects for inputRegs: [] modbus.0 2023-01-13 08:45:03.067 debug Initialize Objects for coils: [] modbus.0 2023-01-13 08:45:03.066 debug Initialize Objects for disInputs: [] modbus.0 2023-01-13 08:45:02.924 info starting. Version 5.0.11 (non-npm: ioBroker/ioBroker.modbus) in /opt/iobroker/node_modules/iobroker.modbus, node: v16.19.0, js-controller: 4.0.24 modbus.0 2023-01-13 08:45:02.606 debug Plugin sentry Initialize Plugin (enabled=true) host.raspberrypi 2023-01-13 08:45:01.211 info instance system.adapter.modbus.0 started with pid 5986MIT Haken bei Adressen 16bit blabla...
modbus.0 2023-01-13 08:47:55.508 debug Cleaning up request fifo. modbus.0 2023-01-13 08:47:55.507 debug Clearing timeout of the current request. modbus.0 2023-01-13 08:47:55.504 info Disconnected from slave modbus.0 2023-01-13 08:47:54.503 warn Poll error count: 1 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 08:47:54.501 error Request timed out. modbus.0 2023-01-13 08:47:54.499 warn Error: undefined modbus.0 2023-01-13 08:47:49.530 error unknown function code: 0x20, 0x20 modbus.0 2023-01-13 08:47:49.497 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:47:49.495 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:47:48.443 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-13 08:47:48.411 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:47:48.410 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:47:47.356 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-13 08:47:47.323 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:47:47.322 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:47:46.269 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-13 08:47:46.165 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:47:46.163 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:47:45.109 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-13 08:47:45.076 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:47:45.075 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:47:44.022 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-13 08:47:43.985 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:47:43.984 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:47:42.930 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-13 08:47:42.892 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:47:42.891 debug Initialization of scale factors done! modbus.0 2023-01-13 08:47:42.889 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:47:42.888 info Connected to slave modbus.0 2023-01-13 08:47:42.870 debug connect to serial /dev/ttyUSB0 with 9600 -
Und so sieht das ganze aus wenn es eine weile lief...
modbus.0 2023-01-13 09:14:40.917 debug Cleaning up request fifo. modbus.0 2023-01-13 09:14:40.916 debug Clearing timeout of the current request. modbus.0 2023-01-13 09:14:40.910 info Disconnected from slave modbus.0 2023-01-13 09:14:39.907 warn Poll error count: 1 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 09:14:39.906 error Request timed out. modbus.0 2023-01-13 09:14:39.905 warn Error: undefined modbus.0 2023-01-13 09:14:34.935 error Wrong CRC for frame: 255,2,3,2,0,26,125,143 modbus.0 2023-01-13 09:14:34.901 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 09:14:34.900 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 09:14:33.843 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-13 09:14:33.793 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 09:14:33.792 debug Initialization of scale factors done! modbus.0 2023-01-13 09:14:33.789 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 09:14:33.787 info Connected to slave modbus.0 2023-01-13 09:14:33.778 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 09:14:33.501 debug Add holdingRegisters.1056_Temperature_Inv1: {"_id":"holdingRegisters.1056_Temperature_Inv1","type":"state","common":{"name":"","role":"state","type":"number","read":true,"write":true,"def":0,"unit":"°C"},"native":{"regType":"holdingRegs","address":1056,"deviceId":2,"type":"int16be","len":1,"offset":0,"factor":1,"poll":true}} modbus.0 2023-01-13 09:14:33.501 debug Initialize Objects for holdingRegs: [{"_address":"1056","name":"Temperature_Inv1","description":"","unit":"°C","type":"int16be","len":1,"factor":1,"offset":0,"formula":"","role":"state","room":"","poll":true,"wp":false,"cw":false,"isScale":false,"deviceId":2,"address":1056,"id":"holdingRegisters.1056_Temperature_Inv1"}] modbus.0 2023-01-13 09:14:33.500 debug Initialize Objects for inputRegs: [] modbus.0 2023-01-13 09:14:33.499 debug Initialize Objects for coils: [] modbus.0 2023-01-13 09:14:33.498 debug Initialize Objects for disInputs: [] modbus.0 2023-01-13 09:14:33.357 info starting. Version 5.0.11 (non-npm: ioBroker/ioBroker.modbus) in /opt/iobroker/node_modules/iobroker.modbus, node: v16.19.0, js-controller: 4.0.24 modbus.0 2023-01-13 09:14:33.037 debug Plugin sentry Initialize Plugin (enabled=true) host.raspberrypi 2023-01-13 09:14:31.670 info instance system.adapter.modbus.0 started with pid 6057 host.raspberrypi 2023-01-13 09:14:30.562 info Restart adapter system.adapter.modbus.0 because enabled host.raspberrypi 2023-01-13 09:14:30.561 info instance system.adapter.modbus.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP) modbus.0 2023-01-13 09:14:29.937 info Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason modbus.0 2023-01-13 09:14:29.936 debug Plugin sentry destroyed modbus.0 2023-01-13 09:14:29.934 error Reconnect did not help, restart adapter modbus.0 2023-01-13 09:14:29.933 warn Poll error count: 13 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 09:14:29.932 error Request timed out. modbus.0 2023-01-13 09:14:29.931 warn Error: undefined modbus.0 2023-01-13 09:14:24.960 error Wrong CRC for frame: 255,2,3,2,0,26,125,143 modbus.0 2023-01-13 09:14:24.929 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 09:14:24.928 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 09:14:24.927 info Connected to slave modbus.0 2023-01-13 09:14:24.921 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 09:13:24.923 debug Cleaning up request fifo. modbus.0 2023-01-13 09:13:24.922 debug Clearing timeout of the current request. modbus.0 2023-01-13 09:13:24.919 info Disconnected from slave modbus.0 2023-01-13 09:13:23.918 warn Poll error count: 12 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 09:13:23.917 error Request timed out. modbus.0 2023-01-13 09:13:23.916 warn Error: undefined modbus.0 2023-01-13 09:13:18.944 error Wrong CRC for frame: 255,2,3,2,0,26,125,143 modbus.0 2023-01-13 09:13:18.914 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 09:13:18.914 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 09:13:18.913 info Connected to slave modbus.0 2023-01-13 09:13:18.907 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 09:12:18.908 debug Cleaning up request fifo. modbus.0 2023-01-13 09:12:18.907 debug Clearing timeout of the current request. modbus.0 2023-01-13 09:12:18.905 info Disconnected from slave modbus.0 2023-01-13 09:12:17.904 warn Poll error count: 11 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 09:12:17.904 error Request timed out. modbus.0 2023-01-13 09:12:17.903 warn Error: undefined modbus.0 2023-01-13 09:12:12.931 error Wrong CRC for frame: 255,2,3,2,0,26,125,143 modbus.0 2023-01-13 09:12:12.901 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 09:12:12.900 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 09:12:12.897 info Connected to slave modbus.0 2023-01-13 09:12:12.891 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 09:11:12.895 debug Cleaning up request fifo. modbus.0 2023-01-13 09:11:12.894 debug Clearing timeout of the current request. modbus.0 2023-01-13 09:11:12.890 info Disconnected from slave modbus.0 2023-01-13 09:11:11.890 warn Poll error count: 10 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 09:11:11.889 error Request timed out. modbus.0 2023-01-13 09:11:11.888 warn Error: undefined modbus.0 2023-01-13 09:11:06.919 error Wrong CRC for frame: 255,2,3,2,0,26,125,143 modbus.0 2023-01-13 09:11:06.885 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 09:11:06.885 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 09:11:06.883 info Connected to slave modbus.0 2023-01-13 09:11:06.876 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 09:10:06.877 debug Cleaning up request fifo. modbus.0 2023-01-13 09:10:06.876 debug Clearing timeout of the current request. modbus.0 2023-01-13 09:10:06.873 info Disconnected from slave modbus.0 2023-01-13 09:10:05.872 warn Poll error count: 9 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 09:10:05.871 error Request timed out. modbus.0 2023-01-13 09:10:05.870 warn Error: undefined modbus.0 2023-01-13 09:10:00.898 error Wrong CRC for frame: 255,2,3,2,0,26,125,143 modbus.0 2023-01-13 09:10:00.868 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 09:10:00.867 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 09:10:00.865 info Connected to slave modbus.0 2023-01-13 09:10:00.860 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 09:09:00.863 debug Cleaning up request fifo. modbus.0 2023-01-13 09:09:00.862 debug Clearing timeout of the current request. modbus.0 2023-01-13 09:09:00.858 info Disconnected from slave modbus.0 2023-01-13 09:08:59.856 warn Poll error count: 8 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 09:08:59.856 error Request timed out. modbus.0 2023-01-13 09:08:59.855 warn Error: undefined modbus.0 2023-01-13 09:08:54.885 error Wrong CRC for frame: 255,2,3,2,0,26,125,143 modbus.0 2023-01-13 09:08:54.853 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 09:08:54.852 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 09:08:54.851 info Connected to slave modbus.0 2023-01-13 09:08:54.846 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 09:07:54.859 debug Cleaning up request fifo. modbus.0 2023-01-13 09:07:54.858 debug Clearing timeout of the current request. modbus.0 2023-01-13 09:07:54.844 info Disconnected from slave modbus.0 2023-01-13 09:07:53.843 warn Poll error count: 7 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 09:07:53.842 error Request timed out. modbus.0 2023-01-13 09:07:53.841 warn Error: undefined modbus.0 2023-01-13 09:07:48.871 error Wrong CRC for frame: 255,2,3,2,0,26,125,143 modbus.0 2023-01-13 09:07:48.839 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 09:07:48.839 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 09:07:48.838 info Connected to slave modbus.0 2023-01-13 09:07:48.831 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 09:06:48.835 debug Cleaning up request fifo. modbus.0 2023-01-13 09:06:48.834 debug Clearing timeout of the current request. modbus.0 2023-01-13 09:06:48.830 info Disconnected from slave modbus.0 2023-01-13 09:06:47.830 warn Poll error count: 6 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 09:06:47.829 error Request timed out. modbus.0 2023-01-13 09:06:47.828 warn Error: undefined modbus.0 2023-01-13 09:06:42.855 error Wrong CRC for frame: 255,2,3,2,0,26,125,143 modbus.0 2023-01-13 09:06:42.826 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 09:06:42.826 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 09:06:42.825 info Connected to slave modbus.0 2023-01-13 09:06:42.820 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 09:05:42.824 debug Cleaning up request fifo. modbus.0 2023-01-13 09:05:42.822 debug Clearing timeout of the current request. modbus.0 2023-01-13 09:05:42.819 info Disconnected from slave modbus.0 2023-01-13 09:05:41.819 warn Poll error count: 5 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 09:05:41.819 error Request timed out. modbus.0 2023-01-13 09:05:41.817 warn Error: undefined modbus.0 2023-01-13 09:05:36.922 error Wrong CRC for frame: 255,2,3,2,0,26,125,143 modbus.0 2023-01-13 09:05:36.815 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 09:05:36.815 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 09:05:36.814 info Connected to slave modbus.0 2023-01-13 09:05:36.807 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 09:04:36.809 debug Cleaning up request fifo. modbus.0 2023-01-13 09:04:36.808 debug Clearing timeout of the current request. modbus.0 2023-01-13 09:04:36.806 info Disconnected from slave modbus.0 2023-01-13 09:04:35.806 warn Poll error count: 4 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 09:04:35.805 error Request timed out. modbus.0 2023-01-13 09:04:35.804 warn Error: undefined modbus.0 2023-01-13 09:04:30.909 error Wrong CRC for frame: 255,2,3,2,0,26,125,143 modbus.0 2023-01-13 09:04:30.802 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 09:04:30.801 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 09:04:30.800 info Connected to slave modbus.0 2023-01-13 09:04:30.790 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 09:03:30.793 debug Cleaning up request fifo. modbus.0 2023-01-13 09:03:30.792 debug Clearing timeout of the current request. modbus.0 2023-01-13 09:03:30.789 info Disconnected from slave modbus.0 2023-01-13 09:03:29.789 warn Poll error count: 3 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 09:03:29.788 error Request timed out. modbus.0 2023-01-13 09:03:29.787 warn Error: undefined modbus.0 2023-01-13 09:03:24.891 error Wrong CRC for frame: 255,2,3,2,0,26,125,143 modbus.0 2023-01-13 09:03:24.785 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 09:03:24.784 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 09:03:24.784 info Connected to slave modbus.0 2023-01-13 09:03:24.778 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 09:02:24.781 debug Cleaning up request fifo. modbus.0 2023-01-13 09:02:24.780 debug Clearing timeout of the current request. modbus.0 2023-01-13 09:02:24.777 info Disconnected from slave modbus.0 2023-01-13 09:02:23.777 warn Poll error count: 2 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 09:02:23.776 error Request timed out. modbus.0 2023-01-13 09:02:23.775 warn Error: undefined modbus.0 2023-01-13 09:02:18.874 error Wrong CRC for frame: 255,2,3,2,0,26,125,143 modbus.0 2023-01-13 09:02:18.772 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 09:02:18.771 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 09:02:18.770 info Connected to slave modbus.0 2023-01-13 09:02:18.761 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 09:01:18.764 debug Cleaning up request fifo. modbus.0 2023-01-13 09:01:18.763 debug Clearing timeout of the current request. modbus.0 2023-01-13 09:01:18.759 info Disconnected from slave modbus.0 2023-01-13 09:01:17.759 warn Poll error count: 1 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 09:01:17.758 error Request timed out. modbus.0 2023-01-13 09:01:17.757 warn Error: undefined modbus.0 2023-01-13 09:01:12.856 error Wrong CRC for frame: 255,2,3,2,0,26,125,143 modbus.0 2023-01-13 09:01:12.756 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 09:01:12.752 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 09:01:11.699 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-13 09:01:11.667 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 09:01:11.666 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 09:01:11.664 info Connected to slave modbus.0 2023-01-13 09:01:11.655 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 09:00:11.657 debug Cleaning up request fifo. modbus.0 2023-01-13 09:00:11.656 debug Clearing timeout of the current request. modbus.0 2023-01-13 09:00:11.653 info Disconnected from slave modbus.0 2023-01-13 09:00:10.653 warn Poll error count: 1 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 09:00:10.652 error Request timed out. modbus.0 2023-01-13 09:00:10.651 warn Error: undefined modbus.0 2023-01-13 09:00:05.681 error Error response: 20 modbus.0 2023-01-13 09:00:05.649 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 09:00:05.648 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 09:00:04.596 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-13 09:00:04.567 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 09:00:04.566 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 09:00:03.513 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-13 09:00:03.481 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 09:00:03.480 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 09:00:02.427 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-13 09:00:02.266 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 09:00:02.265 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 09:00:02.264 info Connected to slave modbus.0 2023-01-13 09:00:02.257 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 08:59:02.260 debug Cleaning up request fifo. modbus.0 2023-01-13 08:59:02.259 debug Clearing timeout of the current request. modbus.0 2023-01-13 08:59:02.254 info Disconnected from slave modbus.0 2023-01-13 08:59:01.254 warn Poll error count: 3 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 08:59:01.253 error Request timed out. modbus.0 2023-01-13 08:59:01.252 warn Error: undefined modbus.0 2023-01-13 08:58:56.280 error unknown function code: 0x20, 0x20 modbus.0 2023-01-13 08:58:56.251 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:58:56.250 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:58:56.250 info Connected to slave modbus.0 2023-01-13 08:58:56.243 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 08:57:56.245 debug Cleaning up request fifo. modbus.0 2023-01-13 08:57:56.244 debug Clearing timeout of the current request. modbus.0 2023-01-13 08:57:56.241 info Disconnected from slave modbus.0 2023-01-13 08:57:55.242 warn Poll error count: 2 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 08:57:55.241 error Request timed out. modbus.0 2023-01-13 08:57:55.240 warn Error: undefined modbus.0 2023-01-13 08:57:50.269 error Error response: Data address of some or all the required entities are not allowed or do not exist in slave modbus.0 2023-01-13 08:57:50.268 error Error response for FCx64: Illegal Data Address modbus.0 2023-01-13 08:57:50.238 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:57:50.237 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:57:50.236 info Connected to slave modbus.0 2023-01-13 08:57:50.229 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 08:56:50.232 debug Cleaning up request fifo. modbus.0 2023-01-13 08:56:50.231 debug Clearing timeout of the current request. modbus.0 2023-01-13 08:56:50.228 info Disconnected from slave modbus.0 2023-01-13 08:56:49.227 warn Poll error count: 1 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 08:56:49.226 error Request timed out. modbus.0 2023-01-13 08:56:49.225 warn Error: undefined modbus.0 2023-01-13 08:56:44.255 error unknown function code: 0x20, 0x20 modbus.0 2023-01-13 08:56:44.223 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:56:44.222 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:56:43.169 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-13 08:56:43.137 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:56:43.136 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:56:42.084 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-13 08:56:41.987 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:56:41.986 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:56:41.984 info Connected to slave modbus.0 2023-01-13 08:56:41.977 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 08:55:41.981 debug Cleaning up request fifo. modbus.0 2023-01-13 08:55:41.980 debug Clearing timeout of the current request. modbus.0 2023-01-13 08:55:41.976 info Disconnected from slave modbus.0 2023-01-13 08:55:40.977 warn Poll error count: 1 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 08:55:40.975 error Request timed out. modbus.0 2023-01-13 08:55:40.974 warn Error: undefined modbus.0 2023-01-13 08:55:36.063 error Error response: 20 modbus.0 2023-01-13 08:55:35.973 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:55:35.971 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:55:34.919 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-13 08:55:34.887 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:55:34.885 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:55:33.832 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-13 08:55:33.800 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:55:33.796 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:55:32.743 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-13 08:55:32.709 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:55:32.708 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:55:32.707 info Connected to slave modbus.0 2023-01-13 08:55:32.700 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 08:54:32.703 debug Cleaning up request fifo. modbus.0 2023-01-13 08:54:32.701 debug Clearing timeout of the current request. modbus.0 2023-01-13 08:54:32.698 info Disconnected from slave modbus.0 2023-01-13 08:54:31.697 warn Poll error count: 1 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 08:54:31.696 error Request timed out. modbus.0 2023-01-13 08:54:31.695 warn Error: undefined modbus.0 2023-01-13 08:54:26.724 error unknown function code: 0x20, 0x20 modbus.0 2023-01-13 08:54:26.693 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:54:26.691 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:54:25.638 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-13 08:54:25.605 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:54:25.604 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:54:25.603 info Connected to slave modbus.0 2023-01-13 08:54:25.596 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 08:53:25.598 debug Cleaning up request fifo. modbus.0 2023-01-13 08:53:25.597 debug Clearing timeout of the current request. modbus.0 2023-01-13 08:53:25.594 info Disconnected from slave modbus.0 2023-01-13 08:53:24.593 warn Poll error count: 6 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 08:53:24.592 error Request timed out. modbus.0 2023-01-13 08:53:24.591 warn Error: undefined modbus.0 2023-01-13 08:53:19.618 error unknown function code: 0x20, 0x19 modbus.0 2023-01-13 08:53:19.588 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:53:19.587 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:53:19.585 info Connected to slave modbus.0 2023-01-13 08:53:19.577 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 08:52:19.579 debug Cleaning up request fifo. modbus.0 2023-01-13 08:52:19.578 debug Clearing timeout of the current request. modbus.0 2023-01-13 08:52:19.575 info Disconnected from slave modbus.0 2023-01-13 08:52:18.574 warn Poll error count: 5 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 08:52:18.573 error Request timed out. modbus.0 2023-01-13 08:52:18.572 warn Error: undefined modbus.0 2023-01-13 08:52:13.602 error Wrong CRC for frame: 3,2,0,25,61 modbus.0 2023-01-13 08:52:13.569 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:52:13.568 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:52:13.567 info Connected to slave modbus.0 2023-01-13 08:52:13.561 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 08:51:13.564 debug Cleaning up request fifo. modbus.0 2023-01-13 08:51:13.563 debug Clearing timeout of the current request. modbus.0 2023-01-13 08:51:13.559 info Disconnected from slave modbus.0 2023-01-13 08:51:12.559 warn Poll error count: 4 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 08:51:12.558 error Request timed out. modbus.0 2023-01-13 08:51:12.557 warn Error: undefined modbus.0 2023-01-13 08:51:07.588 error Wrong CRC for frame: 3,2,0,25,61 modbus.0 2023-01-13 08:51:07.555 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:51:07.554 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:51:07.552 info Connected to slave modbus.0 2023-01-13 08:51:07.545 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 08:50:07.547 debug Cleaning up request fifo. modbus.0 2023-01-13 08:50:07.546 debug Clearing timeout of the current request. modbus.0 2023-01-13 08:50:07.542 info Disconnected from slave modbus.0 2023-01-13 08:50:06.542 warn Poll error count: 3 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 08:50:06.541 error Request timed out. modbus.0 2023-01-13 08:50:06.541 warn Error: undefined modbus.0 2023-01-13 08:50:01.569 error Wrong CRC for frame: 6,3,2,0,25,61,142 modbus.0 2023-01-13 08:50:01.537 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:50:01.536 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:50:01.535 info Connected to slave modbus.0 2023-01-13 08:50:01.528 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 08:49:01.528 debug Cleaning up request fifo. modbus.0 2023-01-13 08:49:01.527 debug Clearing timeout of the current request. modbus.0 2023-01-13 08:49:01.524 info Disconnected from slave modbus.0 2023-01-13 08:49:00.523 warn Poll error count: 2 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 08:49:00.522 error Request timed out. modbus.0 2023-01-13 08:49:00.521 warn Error: undefined modbus.0 2023-01-13 08:48:55.550 error Wrong CRC for frame: 6,3,2,0,25,61,142 modbus.0 2023-01-13 08:48:55.517 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:48:55.516 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:48:55.515 info Connected to slave modbus.0 2023-01-13 08:48:55.507 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-13 08:47:55.508 debug Cleaning up request fifo. modbus.0 2023-01-13 08:47:55.507 debug Clearing timeout of the current request. modbus.0 2023-01-13 08:47:55.504 info Disconnected from slave modbus.0 2023-01-13 08:47:54.503 warn Poll error count: 1 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-13 08:47:54.501 error Request timed out. modbus.0 2023-01-13 08:47:54.499 warn Error: undefined modbus.0 2023-01-13 08:47:49.530 error unknown function code: 0x20, 0x20 modbus.0 2023-01-13 08:47:49.497 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:47:49.495 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:47:48.443 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-13 08:47:48.411 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:47:48.410 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:47:47.356 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-13 08:47:47.323 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:47:47.322 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:47:46.269 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-13 08:47:46.165 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:47:46.163 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:47:45.109 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-13 08:47:45.076 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:47:45.075 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:47:44.022 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-13 08:47:43.985 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:47:43.984 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:47:42.930 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-13 08:47:42.892 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-13 08:47:42.891 debug Initialization of scale factors done! modbus.0 2023-01-13 08:47:42.889 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-13 08:47:42.888 info Connected to slave modbus.0 2023-01-13 08:47:42.870 debug connect to serial /dev/ttyUSB0 with 9600 -
@v8turbo sagte in Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter:
<- Wie soll ich das machen ? Es gibt nur eine Einstellung im WR und da kann man die BAUD eintragen. Anleitung steht auch nichts...
Das ist schlecht. Hersteller und/oder Installateur mal kontaktiert?
Weil wenn das nicht passt kannst du lange probieren.
Dann wäre noch wichtig ob das Excel auch wirklich zu deiner SW Version passt.
Hast du mal den Rat von @Glasfaser befolgt?
@glasfaser sagte in Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter:
Mache es so , mit einem Windows Programm QModMaster , zuerst alles raussuchen :
https://forum.iobroker.net/post/829310 -
@wendy2702 nein habe ich noch nicht gemacht aber kann das nochmal mit QModMaster probieren. Die Excel passt, die ist für die aktuelle FW die ich gestern Installiert habe. Jetzt sogar mit Deutsch als Sprache
Hersteller und/oder Installateur mal kontaktiert? <- Habe ich vorhin gerade, aber die Werte sind ja fast immer gleich also die sollten wohl passen. Ich denke immernoch es liegt an dem "Pausen" Problem wie in dem Thread den ich weiter oben verlinkt habe geschrieben wurde.
-
@v8turbo Das kann viele Ursachen haben. Möglich ist auch ein "schlechter USB-RS485" Adapter.
Da hatte ich zu Beginn auch immer Probleme mit.
Seit 2 Tagen nutze ich ein Waveshare RS485<->LAN Adapter zur Abfrage eines Modbus Gerätes und das klappt bisher ohne aussetzer.
-
@wendy2702 ```
[RTU]>Tx > 11:37:06:762 - 02 03 05 85 00 04 55 1F
[RTU]>Rx > 11:37:06:798 - 02 03 08 01 5A 00 91 0F 57 01 54 EE 2C
[RTU]>Tx > 11:37:09:763 - 02 03 05 85 00 04 55 1F
[RTU]>Rx > 11:37:09:799 - 02 03 08 01 2A 00 82 0F F6 01 49 8B C3
[RTU]>Tx > 11:37:12:763 - 02 03 05 85 00 04 55 1F
[RTU]>Rx > 11:37:12:799 - FF 02 03 08 01 5E 00 91
Sys > 11:37:13:309 - Error : Response not from requested slave
[RTU]>Tx > 11:37:15:764 - 02 03 05 85 00 04 55 1F
[RTU]>Rx > 11:37:15:798 - 02 03 08 01 45 00 8B 0F D0 01 4E 68 CD
[RTU]>Tx > 11:37:18:762 - 02 03 05 85 00 04 55 1F
[RTU]>Rx > 11:37:18:797 - FF 02 03 08 01 1C 00 7C
Sys > 11:37:19:302 - Error : Response not from requested slave
[RTU]>Tx > 11:37:21:765 - 02 03 05 85 00 04 55 1F
[RTU]>Rx > 11:37:21:877 - 02 03 08 01 52 00 90 0F 85 01 52 7A 17
[RTU]>Tx > 11:37:24:763 - 02 03 05 85 00 04 55 1F
[RTU]>Rx > 11:37:24:799 - FF 02 03 08 01 5F 00 90
Sys > 11:37:25:312 - Error : Response not from requested slave
[RTU]>Tx > 11:37:27:815 - 02 03 05 85 00 04 55 1F
[RTU]>Rx > 11:37:27:849 - 02 03 08 01 57 00 90 0F 60 01 54 BE E2
[RTU]>Tx > 11:37:30:762 - 02 03 05 85 00 04 55 1F
[RTU]>Rx > 11:37:30:796 - 02 03 08 01 27 00 80 0F FB 01 49 BF 00
[RTU]>Tx > 11:37:33:765 - 02 03 05 85 00 04 55 1F
[RTU]>Rx > 11:37:33:839 - 02 03 08 01 34 00 86 0F EA 01 4A 05 C5
[RTU]>Tx > 11:37:36:763 - 02 03 05 85 00 04 55 1F
[RTU]>Rx > 11:37:36:798 - FF 02 03 08 01 5F 00 91
Sys > 11:37:37:309 - Error : Response not from requested slave
[RTU]>Tx > 11:37:39:764 - 02 03 05 85 00 04 55 1F
[RTU]>Rx > 11:37:39:799 - 02 03 08 01 41 00 8A 0F BC 01 4F 11 10 -
Wovon ist das?
-
@wendy2702 QModMaster ?!
-
Mit neuem Seriellen RS485 FTDI Chip auf USB...
modbus.0 2023-01-16 20:55:36.525 debug Cleaning up request fifo. modbus.0 2023-01-16 20:55:36.523 debug Clearing timeout of the current request. modbus.0 2023-01-16 20:55:36.520 info Disconnected from slave modbus.0 2023-01-16 20:55:35.519 warn Poll error count: 9 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-16 20:55:35.518 error Request timed out. modbus.0 2023-01-16 20:55:35.517 warn Error: undefined admin.0 2023-01-16 20:55:30.945 info ==> Connected system.user.admin from ::ffff:192.168.178.201 modbus.0 2023-01-16 20:55:30.516 debug [DevID_2/holdingRegs] Poll address 1157 - 43 registers modbus.0 2023-01-16 20:55:30.514 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-16 20:55:30.481 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-16 20:55:30.481 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-16 20:55:30.480 info Connected to slave modbus.0 2023-01-16 20:55:30.473 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-16 20:54:30.477 debug Cleaning up request fifo. modbus.0 2023-01-16 20:54:30.475 debug Clearing timeout of the current request. modbus.0 2023-01-16 20:54:30.472 info Disconnected from slave modbus.0 2023-01-16 20:54:29.473 warn Poll error count: 8 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-16 20:54:29.472 error Request timed out. modbus.0 2023-01-16 20:54:29.470 warn Error: undefined modbus.0 2023-01-16 20:54:24.497 error Wrong CRC for frame: 2,3,2,128,2,3,86 modbus.0 2023-01-16 20:54:24.468 debug [DevID_2/holdingRegs] Poll address 1157 - 43 registers modbus.0 2023-01-16 20:54:24.466 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-16 20:54:24.426 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-16 20:54:24.425 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-16 20:54:24.424 info Connected to slave modbus.0 2023-01-16 20:54:24.415 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-16 20:53:24.419 debug Cleaning up request fifo. modbus.0 2023-01-16 20:53:24.418 debug Clearing timeout of the current request. modbus.0 2023-01-16 20:53:24.413 info Disconnected from slave modbus.0 2023-01-16 20:53:23.411 error Request timed out. modbus.0 2023-01-16 20:53:23.410 warn Error: undefined modbus.0 2023-01-16 20:53:23.400 warn Poll error count: 7 code: "App Timeout" modbus.0 2023-01-16 20:53:18.409 debug [DevID_2/holdingRegs] Poll address 1476 - 1 registers modbus.0 2023-01-16 20:53:18.407 debug [DevID_2/holdingRegs] Poll address 1412 DONE modbus.0 2023-01-16 20:53:18.364 debug [DevID_2/holdingRegs] Poll address 1412 - 6 registers modbus.0 2023-01-16 20:53:18.359 debug [DevID_2/holdingRegs] Poll address 1157 DONE modbus.0 2023-01-16 20:53:18.234 debug [DevID_2/holdingRegs] Poll address 1157 - 43 registers modbus.0 2023-01-16 20:53:18.231 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-16 20:53:18.198 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-16 20:53:18.197 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-16 20:53:18.196 info Connected to slave modbus.0 2023-01-16 20:53:18.187 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-16 20:52:18.203 debug Cleaning up request fifo. modbus.0 2023-01-16 20:52:18.202 debug Clearing timeout of the current request. modbus.0 2023-01-16 20:52:18.185 info Disconnected from slave modbus.0 2023-01-16 20:52:18.133 warn Poll error count: 6 code: "App Timeout" modbus.0 2023-01-16 20:52:13.248 debug [DevID_2/holdingRegs] Poll address 1544 - 3 registers modbus.0 2023-01-16 20:52:13.246 debug [DevID_2/holdingRegs] Poll address 1476 DONE modbus.0 2023-01-16 20:52:13.217 debug [DevID_2/holdingRegs] Poll address 1476 - 1 registers modbus.0 2023-01-16 20:52:13.214 debug [DevID_2/holdingRegs] Poll address 1412 DONE modbus.0 2023-01-16 20:52:13.169 debug [DevID_2/holdingRegs] Poll address 1412 - 6 registers modbus.0 2023-01-16 20:52:13.166 debug [DevID_2/holdingRegs] Poll address 1157 DONE modbus.0 2023-01-16 20:52:13.040 debug [DevID_2/holdingRegs] Poll address 1157 - 43 registers modbus.0 2023-01-16 20:52:13.038 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-16 20:52:12.932 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-16 20:52:12.931 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-16 20:52:12.930 info Connected to slave modbus.0 2023-01-16 20:52:12.922 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-16 20:51:12.924 debug Cleaning up request fifo. modbus.0 2023-01-16 20:51:12.923 debug Clearing timeout of the current request. modbus.0 2023-01-16 20:51:12.920 info Disconnected from slave modbus.0 2023-01-16 20:51:12.825 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-16 20:51:12.824 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-16 20:51:11.920 error Request timed out. modbus.0 2023-01-16 20:51:11.919 warn Error: undefined modbus.0 2023-01-16 20:51:11.772 warn Poll error count: 5 code: "App Timeout" modbus.0 2023-01-16 20:51:06.918 debug [DevID_2/holdingRegs] Poll address 1668 - 22 registers modbus.0 2023-01-16 20:51:06.917 debug [DevID_2/holdingRegs] Poll address 1640 DONE modbus.0 2023-01-16 20:51:06.886 debug [DevID_2/holdingRegs] Poll address 1640 - 2 registers modbus.0 2023-01-16 20:51:06.885 debug [DevID_2/holdingRegs] Poll address 1544 DONE modbus.0 2023-01-16 20:51:06.839 debug [DevID_2/holdingRegs] Poll address 1544 - 3 registers modbus.0 2023-01-16 20:51:06.837 debug [DevID_2/holdingRegs] Poll address 1476 DONE modbus.0 2023-01-16 20:51:06.792 debug [DevID_2/holdingRegs] Poll address 1476 - 1 registers modbus.0 2023-01-16 20:51:06.789 debug [DevID_2/holdingRegs] Poll address 1412 DONE modbus.0 2023-01-16 20:51:06.744 debug [DevID_2/holdingRegs] Poll address 1412 - 6 registers modbus.0 2023-01-16 20:51:06.741 debug [DevID_2/holdingRegs] Poll address 1157 DONE modbus.0 2023-01-16 20:51:06.616 debug [DevID_2/holdingRegs] Poll address 1157 - 43 registers modbus.0 2023-01-16 20:51:06.613 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-16 20:51:06.572 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-16 20:51:06.571 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-16 20:51:06.570 info Connected to slave modbus.0 2023-01-16 20:51:06.561 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-16 20:50:06.564 debug Cleaning up request fifo. modbus.0 2023-01-16 20:50:06.563 debug Clearing timeout of the current request. modbus.0 2023-01-16 20:50:06.560 info Disconnected from slave modbus.0 2023-01-16 20:50:05.561 warn Poll error count: 4 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-16 20:50:05.560 error Request timed out. modbus.0 2023-01-16 20:50:05.552 warn Error: undefined modbus.0 2023-01-16 20:50:00.582 error Wrong CRC for frame: 2,3,2,0,2,3,86 modbus.0 2023-01-16 20:50:00.552 debug [DevID_2/holdingRegs] Poll address 1157 - 43 registers modbus.0 2023-01-16 20:50:00.550 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-16 20:50:00.434 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-16 20:50:00.434 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-16 20:50:00.434 info Connected to slave modbus.0 2023-01-16 20:50:00.428 debug connect to serial /dev/ttyUSB0 with 9600 javascript.0 2023-01-16 20:50:00.014 info script.js.Sonnenstand: Script Sonnenstand; Erfolgreich gelaufen, Werte akzeptiert modbus.0 2023-01-16 20:49:00.430 debug Cleaning up request fifo. modbus.0 2023-01-16 20:49:00.429 debug Clearing timeout of the current request. modbus.0 2023-01-16 20:49:00.426 info Disconnected from slave modbus.0 2023-01-16 20:48:59.433 warn Poll error count: 3 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-16 20:48:59.426 error Request timed out. modbus.0 2023-01-16 20:48:59.425 warn Error: undefined modbus.0 2023-01-16 20:48:54.423 debug [DevID_2/holdingRegs] Poll address 1412 - 6 registers modbus.0 2023-01-16 20:48:54.419 debug [DevID_2/holdingRegs] Poll address 1157 DONE modbus.0 2023-01-16 20:48:54.293 debug [DevID_2/holdingRegs] Poll address 1157 - 43 registers modbus.0 2023-01-16 20:48:54.291 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-16 20:48:54.258 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-16 20:48:54.257 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-16 20:48:54.256 info Connected to slave modbus.0 2023-01-16 20:48:54.248 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-16 20:47:54.251 debug Cleaning up request fifo. modbus.0 2023-01-16 20:47:54.249 debug Clearing timeout of the current request. modbus.0 2023-01-16 20:47:54.246 info Disconnected from slave modbus.0 2023-01-16 20:47:53.245 warn Poll error count: 2 code: {"err":"timeout","timeout":5000} modbus.0 2023-01-16 20:47:53.244 error Request timed out. modbus.0 2023-01-16 20:47:53.243 warn Error: undefined modbus.0 2023-01-16 20:47:48.239 debug [DevID_2/holdingRegs] Poll address 1157 - 43 registers modbus.0 2023-01-16 20:47:48.237 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-16 20:47:48.208 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-16 20:47:48.208 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-16 20:47:48.206 info Connected to slave modbus.0 2023-01-16 20:47:48.196 debug connect to serial /dev/ttyUSB0 with 9600 modbus.0 2023-01-16 20:46:48.199 debug Cleaning up request fifo. modbus.0 2023-01-16 20:46:48.198 debug Clearing timeout of the current request. modbus.0 2023-01-16 20:46:48.193 info Disconnected from slave modbus.0 2023-01-16 20:46:48.126 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-16 20:46:48.125 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-16 20:46:47.192 error Request timed out. modbus.0 2023-01-16 20:46:47.190 warn Error: undefined modbus.0 2023-01-16 20:46:47.071 warn Poll error count: 1 code: "App Timeout" modbus.0 2023-01-16 20:46:42.188 debug [DevID_2/holdingRegs] Poll address 1544 - 3 registers modbus.0 2023-01-16 20:46:42.186 debug [DevID_2/holdingRegs] Poll address 1476 DONE modbus.0 2023-01-16 20:46:42.157 debug [DevID_2/holdingRegs] Poll address 1476 - 1 registers modbus.0 2023-01-16 20:46:42.154 debug [DevID_2/holdingRegs] Poll address 1412 DONE modbus.0 2023-01-16 20:46:42.111 debug [DevID_2/holdingRegs] Poll address 1412 - 6 registers modbus.0 2023-01-16 20:46:42.107 debug [DevID_2/holdingRegs] Poll address 1157 DONE modbus.0 2023-01-16 20:46:41.919 debug [DevID_2/holdingRegs] Poll address 1157 - 43 registers modbus.0 2023-01-16 20:46:41.916 debug [DevID_2/holdingRegs] Poll address 1056 DONE modbus.0 2023-01-16 20:46:41.871 debug [DevID_2/holdingRegs] Poll address 1056 - 1 registers modbus.0 2023-01-16 20:46:41.870 debug Initialization of scale factors done! modbus.0 2023-01-16 20:46:41.869 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-16 20:46:41.867 info Connected to slave modbus.0 2023-01-16 20:46:41.858 debug connect to serial /dev/ttyUSB0 with 9600 -
Mit nur einem Holding und abfrage alle 15sec läuft es.... ?! Woran liegt das ?
modbus.0 2023-01-16 21:15:37.511 debug [DevID_2/holdingRegs] Poll address 1157 DONE modbus.0 2023-01-16 21:15:37.465 debug [DevID_2/holdingRegs] Poll address 1157 - 1 registers modbus.0 2023-01-16 21:15:37.463 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-16 21:15:21.961 debug [DevID_2/holdingRegs] Poll address 1157 DONE modbus.0 2023-01-16 21:15:21.931 debug [DevID_2/holdingRegs] Poll address 1157 - 1 registers modbus.0 2023-01-16 21:15:21.931 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-16 21:15:06.428 debug [DevID_2/holdingRegs] Poll address 1157 DONE modbus.0 2023-01-16 21:15:06.385 debug [DevID_2/holdingRegs] Poll address 1157 - 1 registers modbus.0 2023-01-16 21:15:06.382 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-16 21:14:50.878 debug [DevID_2/holdingRegs] Poll address 1157 DONE modbus.0 2023-01-16 21:14:50.838 debug [DevID_2/holdingRegs] Poll address 1157 - 1 registers modbus.0 2023-01-16 21:14:50.836 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-16 21:14:35.331 debug [DevID_2/holdingRegs] Poll address 1157 DONE modbus.0 2023-01-16 21:14:35.236 debug [DevID_2/holdingRegs] Poll address 1157 - 1 registers modbus.0 2023-01-16 21:14:35.236 debug Initialization of scale factors done! modbus.0 2023-01-16 21:14:35.234 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-16 21:14:35.233 info Connected to slave modbus.0 2023-01-16 21:14:35.218 debug connect to serial /dev/ttyUSB0 with 9600 -
@v8turbo Gab irgendwo einen anderen Thread wo die user die Register Abfrage Länge unter allgemein auf 1 für Float und Boolean gestellt haben bei einem ähnlichen Problem.
Probier das doch mal.
-
@wendy2702 Hilft auch nicht. Hab jetzt diese Register...
_address name description unit type len factor offset formula role room poll wp cw isScale 1668 PV_Generation_Today kWh uint32be 2 0,01 0 state true false false false 1672 Load_Consumption_Today kWh uint32be 2 0,01 0 state true false false false 1676 Energy_Purchase_Today kWh uint32be 2 0,01 0 state true false false false 1680 Energy_Selling_Today kWh uint32be 2 0,01 0 state true false false false 1684 Bat_Charge_Today kWh uint32be 2 0,01 0 state true false false false 1688 Bat_Discharge_Today kWh uint32be 2 0,01 0 state true false false falseDie liegen wohl alle auf 1668 (modbus.0
2023-01-17 10:19:05.533 debug [DevID_2/holdingRegs] Poll address 1668 - 22 registers), zumindest liest er die alle seit gestern Abend alle 15sec ohne Fehler. Sobald ich ein anderes hinzufüge geht es nicht mehr, ich denke auch es hat was mit dem Problem zutun was auch andere hatten...Aber es muss doch jemand eine Lösung dafür haben ??
-
admin.0 2023-01-17 10:19:58.552 info <== Disconnect system.user.admin from ::ffff:192.168.178.203 modbus admin.0 2023-01-17 10:19:58.552 info <== Disconnect system.user.admin from ::ffff:192.168.178.203 modbus modbus.0 2023-01-17 10:19:52.410 debug [DevID_2/holdingRegs] Poll address 1668 DONE modbus.0 2023-01-17 10:19:52.288 debug [DevID_2/holdingRegs] Poll address 1668 - 22 registers modbus.0 2023-01-17 10:19:52.286 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-17 10:19:36.780 debug [DevID_2/holdingRegs] Poll address 1668 DONE modbus.0 2023-01-17 10:19:36.704 debug [DevID_2/holdingRegs] Poll address 1668 - 22 registers modbus.0 2023-01-17 10:19:36.703 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-17 10:19:21.199 debug [DevID_2/holdingRegs] Poll address 1668 DONE modbus.0 2023-01-17 10:19:21.122 debug [DevID_2/holdingRegs] Poll address 1668 - 22 registers modbus.0 2023-01-17 10:19:21.121 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-17 10:19:05.618 debug [DevID_2/holdingRegs] Poll address 1668 DONE modbus.0 2023-01-17 10:19:05.533 debug [DevID_2/holdingRegs] Poll address 1668 - 22 registers modbus.0 2023-01-17 10:19:05.532 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-17 10:18:50.021 debug [DevID_2/holdingRegs] Poll address 1668 DONE modbus.0 2023-01-17 10:18:49.944 debug [DevID_2/holdingRegs] Poll address 1668 - 22 registers modbus.0 2023-01-17 10:18:49.942 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-17 10:18:34.440 debug [DevID_2/holdingRegs] Poll address 1668 DONE modbus.0 2023-01-17 10:18:34.282 debug [DevID_2/holdingRegs] Poll address 1668 - 22 registers modbus.0 2023-01-17 10:18:34.281 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-17 10:18:18.778 debug [DevID_2/holdingRegs] Poll address 1668 DONE modbus.0 2023-01-17 10:18:18.701 debug [DevID_2/holdingRegs] Poll address 1668 - 22 registers modbus.0 2023-01-17 10:18:18.700 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-17 10:18:03.197 debug [DevID_2/holdingRegs] Poll address 1668 DONE modbus.0 2023-01-17 10:18:03.119 debug [DevID_2/holdingRegs] Poll address 1668 - 22 registers modbus.0 2023-01-17 10:18:03.118 debug [DevID_2] Poll start --------------------- modbus.0 2023-01-17 10:17:47.684 info List of port: [{"path":"/dev/ttyAMA0"},{"path":"/dev/ttyUSB0"}] modbus.0 2023-01-17 10:17:47.683 info Check /dev/ttyUSB0 : true modbus.0 2023-01-17 10:17:47.683 info Check /dev/ttyAMA0 : true modbus.0 2023-01-17 10:17:47.681 info Verify [{"path":"/dev/ttyUSB0","manufacturer":"FTDI","serialNumber":"A10NB15S","pnpId":"usb-FTDI_FT232R_USB_UART_A10NB15S-if00-port0","vendorId":"0403","productId":"6001"},{"path":"/dev/ttyAMA0"}] modbus.0 2023-01-17 10:17:47.616 debug [DevID_2/holdingRegs] Poll address 1668 DONE modbus.0 2023-01-17 10:17:47.541 debug [DevID_2/holdingRegs] Poll address 1668 - 22 registers modbus.0 2023-01-17 10:17:47.540 debug [DevID_2] Poll start ---------------------
