js-controller lässt sich nicht updaten...

Thomas Braun

@mr-burns

Interessanter wäre:

sudo ln -s /usr/bin/node /usr/bin/nodejs
uname -m && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v && whoami && groups && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs

Thomas Braun

@mr-burns sagte in js-controller lässt sich nicht updaten...:

Lass die Finger von individuellen Updates von npm. Egal ob das irgendwo empfohlen wird.

iobroker stop
sudo apt update
sudo apt full-upgrade
sudo apt install --reinstall nodejs
cd /opt/iobroker 
sudo -H -u iobroker npm cache clear --force
sudo reboot

Thomas Braun

@mr-burns

Warum wird da eigentlich openzwave gebaut?
Wenn ich der readme von zwave2 vertrauen darf wird das (anders als iobroker.zwave) da garnicht benötigt?
Was haste da also am Start?

iob update -i

Mr. Burns

@thomas-braun Das ist ein gute Frage...kann ich nicht beantworten.
Ich habe die zwave adapter installiert aber nicht aktiviert (haben nicht funktioniert oder so, weiß nicht mehr genau)

Thomas Braun

@mr-burns sagte in js-controller lässt sich nicht updaten...:

Ich habe die zwave adapter installiert aber nicht aktiviert

Das Zeug spukt da aber noch herum.

(haben nicht funktioniert oder so, weiß nicht mehr genau)

Kein Wunder...

Mr. Burns

@thomas-braun

iob update -i
Used repository: stable
Adapter    "admin"        : 6.2.22   , installed 6.2.22
Adapter    "amazon-dash"  : 1.1.0    , installed 0.3.1  [Updatable]
Adapter    "backitup"     : 2.4.12   , installed 2.4.12
Adapter    "ble"          : 0.13.0   , installed 0.13.0
Adapter    "bsblan"       : 0.2.2    , installed 0.2.2
Adapter    "coronavirus-statistics": 0.8.7, installed 0.8.7
Adapter    "discovery"    : 3.0.5    , installed 3.0.5
Adapter    "flot"         : 1.11.0   , installed 1.11.0
Adapter    "fullybrowser" : 2.1.2    , installed 2.1.2
Adapter    "geofency"     : 1.1.1    , installed 1.1.1
Adapter    "habpanel"     : 0.5.0    , installed 0.5.0
Adapter    "harmony"      : 1.2.2    , installed 1.2.2
Adapter    "history"      : 2.2.0    , installed 2.2.0
Adapter    "hm-rega"      : 3.0.40   , installed 3.0.40
Adapter    "hm-rpc"       : 1.15.12  , installed 1.15.12
Adapter    "homekit-controller": 0.5.1, installed 0.5.1
Adapter    "ical"         : 1.13.1   , installed 1.13.1
Adapter    "icons-addictive-flavour-png": 0.1.0, installed 0.1.0
Adapter    "icons-material-svg": 0.1.0, installed 0.1.0
Adapter    "icons-mfd-png": 1.1.0    , installed 1.1.0
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "icons-open-icon-library-png": 0.1.2, installed 0.1.3
Adapter    "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter    "influxdb"     : 3.1.8    , installed 3.1.8
Adapter    "info"         : 1.9.19   , installed 1.9.19
Adapter    "iqontrol"     : 2.0.0    , installed 2.0.1
Adapter    "javascript"   : 6.0.3    , installed 6.0.3
Controller "js-controller": 4.0.23   , installed 4.0.21 [Updatable]
Adapter    "mielecloudservice": 6.3.2, installed 6.3.2
Adapter    "mihome"       : 1.4.0    , installed 1.4.0
Adapter    "mihome-vacuum": 3.4.2    , installed 3.4.2
Adapter    "mobile"       : 1.0.1    , installed 1.0.1
Adapter    "modbus"       : 5.0.5    , installed 5.0.5
Adapter    "openweathermap": 0.3.0   , installed 0.3.0
Adapter    "paw"          : 0.3.2    , installed 0.3.2
Adapter    "proxy"        : 1.3.1    , installed 1.3.1
Adapter    "pushover"     : 3.0.3    , installed 3.0.3
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "s7"           : 1.3.13   , installed 1.3.13
Adapter    "simple-api"   : 2.7.0    , installed 2.7.0
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "sonos"        : 2.2.3    , installed 2.2.3
Adapter    "synology"     : 2.1.9    , installed 2.1.9
Adapter    "telegram"     : 1.14.1   , installed 1.14.1
Adapter    "terminal"     : 0.2.6    , installed 0.2.6
Adapter    "tinker"       : 1.1.1    , installed 1.1.1
Adapter    "tr-064"       : 4.2.16   , installed 4.2.16
Adapter    "tradfri"      : 3.1.3    , installed 3.1.3
Adapter    "trashschedule": 2.0.3    , installed 2.0.3
Adapter    "vis"          : 1.4.15   , installed 1.4.15
Adapter    "vis-bars"     : 0.1.4    , installed 0.1.4
Adapter    "vis-canvas-gauges": 0.1.5, installed 0.1.5
Adapter    "vis-history"  : 1.0.0    , installed 1.0.0
Adapter    "vis-hqwidgets": 1.3.0    , installed 1.3.0
Adapter    "vis-jqui-mfd" : 1.0.12   , installed 1.0.12
Adapter    "vis-players"  : 0.1.6    , installed 0.1.6
Adapter    "vis-plumb"    : 1.0.2    , installed 1.0.2
Adapter    "vis-rgraph"   : 0.0.2    , installed 0.0.2
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "weatherunderground": 3.4.2, installed 3.4.2
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0
Adapter    "yahka"        : 0.13.1   , installed 0.13.1
Adapter    "zigbee"       : 1.7.5    , installed 1.7.5
Adapter    "zwave2"       : 3.0.3    , installed 3.0.3

Thomas Braun

@mr-burns

Hast du jetzt die Befehle aus Post #21 ausgeführt?

Mr. Burns

@thomas-braun
Ja...versuche gerade wieder ein update vom js-controller

Ergebnis:

iobroker upgrade self --debug
Update js-controller from @4.0.21 to @4.0.23
Stopped Objects DB
Stopped States DB
NPM version: 8.15.0
Installing iobroker.js-controller@4.0.23... (System call)
npm WARN deprecated request-promise@4.2.6: request-promise has been deprecated because it extends the now deprecated request package, see https://github.com/request/request/issues/3142
npm WARN deprecated har-validator@5.1.5: this library is no longer supported
npm WARN deprecated dgram@1.0.1: npm is holding this package for security reasons. As it's a core Node module, we will not transfer it over to other users. You may safely remove the package from your dependencies.
npm WARN deprecated appdirectory@0.1.0: Package no longer supported. Contact Support at https://www.npmjs.com/support for more info.
npm WARN deprecated node-inspect@2.0.0: This module is part of Node.js core and does not need to be installed separately. It is now unmaintained.
npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797)
npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797)
npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797)
npm WARN deprecated uuid@3.4.0: Please upgrade  to version 7 or higher.  Older versions may use Math.random() in certain circumstances, which is known to be problematic.  See https://v8.dev/blog/math-random for details.
npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142
npm ERR! code 1
npm ERR! path /opt/iobroker/node_modules/openzwave-shared
npm ERR! command failed
npm ERR! command sh /tmp/install-568a43d9.sh
npm ERR! make: Verzeichnis „/opt/iobroker/node_modules/openzwave-shared/build“ wird betreten
npm ERR!   CXX(target) Release/obj.target/openzwave_shared/src/callbacks.o
npm ERR! make: Verzeichnis „/opt/iobroker/node_modules/openzwave-shared/build“ wird verlassen
npm ERR! gyp info it worked if it ends with ok
npm ERR! gyp info using node-gyp@9.0.0
npm ERR! gyp info using node@16.17.1 | linux | arm
npm ERR! gyp info find Python using Python version 3.9.2 found at "/usr/bin/python3"
npm ERR! gyp info spawn /usr/bin/python3
npm ERR! gyp info spawn args [
npm ERR! gyp info spawn args   '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',
npm ERR! gyp info spawn args   'binding.gyp',
npm ERR! gyp info spawn args   '-f',
npm ERR! gyp info spawn args   'make',
npm ERR! gyp info spawn args   '-I',
npm ERR! gyp info spawn args   '/opt/iobroker/node_modules/openzwave-shared/build/config.gypi',
npm ERR! gyp info spawn args   '-I',
npm ERR! gyp info spawn args   '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',
npm ERR! gyp info spawn args   '-I',
npm ERR! gyp info spawn args   '/home/iobroker/.cache/node-gyp/16.17.1/include/node/common.gypi',
npm ERR! gyp info spawn args   '-Dlibrary=shared_library',
npm ERR! gyp info spawn args   '-Dvisibility=default',
npm ERR! gyp info spawn args   '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/16.17.1',
npm ERR! gyp info spawn args   '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',
npm ERR! gyp info spawn args   '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/16.17.1/<(target_arch)/node.lib',
npm ERR! gyp info spawn args   '-Dmodule_root_dir=/opt/iobroker/node_modules/openzwave-shared',
npm ERR! gyp info spawn args   '-Dnode_engine=v8',
npm ERR! gyp info spawn args   '--depth=.',
npm ERR! gyp info spawn args   '--no-parallel',
npm ERR! gyp info spawn args   '--generator-output',
npm ERR! gyp info spawn args   'build',
npm ERR! gyp info spawn args   '-Goutput_dir=.'
npm ERR! gyp info spawn args ]
npm ERR! gyp info spawn make
npm ERR! gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]
npm ERR! In file included from /home/iobroker/.cache/node-gyp/16.17.1/include/node/v8.h:30,
npm ERR!                  from ../src/openzwave.hpp:27,
npm ERR!                  from ../src/callbacks.cc:18:
npm ERR! /home/iobroker/.cache/node-gyp/16.17.1/include/node/v8-internal.h: In function ‘void v8::internal::PerformCastCheck(T*)’:
npm ERR! /home/iobroker/.cache/node-gyp/16.17.1/include/node/v8-internal.h:492:38: error: ‘remove_cv_t’ is not a member of ‘std’; did you mean ‘remove_cv’?
npm ERR!   492 |             !std::is_same<Data, std::remove_cv_t<T>>::value>::Perform(data);
npm ERR!       |                                      ^~~~~~~~~~~
npm ERR!       |                                      remove_cv
npm ERR! /home/iobroker/.cache/node-gyp/16.17.1/include/node/v8-internal.h:492:38: error: ‘remove_cv_t’ is not a member of ‘std’; did you mean ‘remove_cv’?
npm ERR!   492 |             !std::is_same<Data, std::remove_cv_t<T>>::value>::Perform(data);
npm ERR!       |                                      ^~~~~~~~~~~
npm ERR!       |                                      remove_cv
npm ERR! /home/iobroker/.cache/node-gyp/16.17.1/include/node/v8-internal.h:492:50: error: template argument 2 is invalid
npm ERR!   492 |             !std::is_same<Data, std::remove_cv_t<T>>::value>::Perform(data);
npm ERR!       |                                                  ^
npm ERR! /home/iobroker/.cache/node-gyp/16.17.1/include/node/v8-internal.h:492:63: error: ‘::Perform’ has not been declared
npm ERR!   492 |             !std::is_same<Data, std::remove_cv_t<T>>::value>::Perform(data);
npm ERR!       |                                                               ^~~~~~~
npm ERR! make: *** [openzwave_shared.target.mk:148: Release/obj.target/openzwave_shared/src/callbacks.o] Fehler 1
npm ERR! gyp ERR! build error 
npm ERR! gyp ERR! stack Error: `make` failed with exit code: 2
npm ERR! gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23)
npm ERR! gyp ERR! stack     at ChildProcess.emit (node:events:513:28)
npm ERR! gyp ERR! stack     at Process.ChildProcess._handle.onexit (node:internal/child_process:291:12)
npm ERR! gyp ERR! System Linux 5.15.61-v7l+
npm ERR! gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
npm ERR! gyp ERR! cwd /opt/iobroker/node_modules/openzwave-shared
npm ERR! gyp ERR! node -v v16.17.1
npm ERR! gyp ERR! node-gyp -v v9.0.0
npm ERR! gyp ERR! not ok

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2022-09-30T17_36_01_287Z-debug-0.log
``
[/s]

Thomas Braun

@mr-burns sagte in js-controller lässt sich nicht updaten...:

openzwave-shared

Schmeiß den Kram mal raus.

cd /opt/iobroker 
npm ls openzwave-shared
sudo -H -u iobroker npm uninstall openzwave-shared

Mr. Burns

@thomas-braun

War nicht so erfolgreich:

sudo -H -u iobroker npm uninstall openzwave-shared
npm WARN deprecated dgram@1.0.1: npm is holding this package for security reasons. As it's a core Node module, we will not transfer it over to other users. You may safely remove the package from your dependencies.
npm WARN deprecated har-validator@5.1.5: this library is no longer supported
npm WARN deprecated request-promise@4.2.6: request-promise has been deprecated because it extends the now deprecated request package, see https://github.com/request/request/issues/3142
npm WARN deprecated appdirectory@0.1.0: Package no longer supported. Contact Support at https://www.npmjs.com/support for more info.
npm WARN deprecated node-inspect@2.0.0: This module is part of Node.js core and does not need to be installed separately. It is now unmaintained.
npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797)
npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797)
npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797)
npm WARN deprecated uuid@3.4.0: Please upgrade  to version 7 or higher.  Older versions may use Math.random() in certain circumstances, which is known to be problematic.  See https://v8.dev/blog/math-random for details.
npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142
npm ERR! code 1
npm ERR! path /opt/iobroker/node_modules/openzwave-shared
npm ERR! command failed
npm ERR! command sh /tmp/install-6a225777.sh
npm ERR! make: Verzeichnis „/opt/iobroker/node_modules/openzwave-shared/build“ wird betreten
npm ERR!   CXX(target) Release/obj.target/openzwave_shared/src/callbacks.o
npm ERR! make: Verzeichnis „/opt/iobroker/node_modules/openzwave-shared/build“ wird verlassen
npm ERR! gyp info it worked if it ends with ok
npm ERR! gyp info using node-gyp@9.0.0
npm ERR! gyp info using node@16.17.1 | linux | arm
npm ERR! gyp info find Python using Python version 3.9.2 found at "/usr/bin/python3"
npm ERR! gyp info spawn /usr/bin/python3
npm ERR! gyp info spawn args [
npm ERR! gyp info spawn args   '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',
npm ERR! gyp info spawn args   'binding.gyp',
npm ERR! gyp info spawn args   '-f',
npm ERR! gyp info spawn args   'make',
npm ERR! gyp info spawn args   '-I',
npm ERR! gyp info spawn args   '/opt/iobroker/node_modules/openzwave-shared/build/config.gypi',
npm ERR! gyp info spawn args   '-I',
npm ERR! gyp info spawn args   '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',
npm ERR! gyp info spawn args   '-I',
npm ERR! gyp info spawn args   '/home/iobroker/.cache/node-gyp/16.17.1/include/node/common.gypi',
npm ERR! gyp info spawn args   '-Dlibrary=shared_library',
npm ERR! gyp info spawn args   '-Dvisibility=default',
npm ERR! gyp info spawn args   '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/16.17.1',
npm ERR! gyp info spawn args   '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',
npm ERR! gyp info spawn args   '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/16.17.1/<(target_arch)/node.lib',
npm ERR! gyp info spawn args   '-Dmodule_root_dir=/opt/iobroker/node_modules/openzwave-shared',
npm ERR! gyp info spawn args   '-Dnode_engine=v8',
npm ERR! gyp info spawn args   '--depth=.',
npm ERR! gyp info spawn args   '--no-parallel',
npm ERR! gyp info spawn args   '--generator-output',
npm ERR! gyp info spawn args   'build',
npm ERR! gyp info spawn args   '-Goutput_dir=.'
npm ERR! gyp info spawn args ]
npm ERR! gyp info spawn make
npm ERR! gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]
npm ERR! In file included from /home/iobroker/.cache/node-gyp/16.17.1/include/node/v8.h:30,
npm ERR!                  from ../src/openzwave.hpp:27,
npm ERR!                  from ../src/callbacks.cc:18:
npm ERR! /home/iobroker/.cache/node-gyp/16.17.1/include/node/v8-internal.h: In function ‘void v8::internal::PerformCastCheck(T*)’:
npm ERR! /home/iobroker/.cache/node-gyp/16.17.1/include/node/v8-internal.h:492:38: error: ‘remove_cv_t’ is not a member of ‘std’; did you mean ‘remove_cv’?
npm ERR!   492 |             !std::is_same<Data, std::remove_cv_t<T>>::value>::Perform(data);
npm ERR!       |                                      ^~~~~~~~~~~
npm ERR!       |                                      remove_cv
npm ERR! /home/iobroker/.cache/node-gyp/16.17.1/include/node/v8-internal.h:492:38: error: ‘remove_cv_t’ is not a member of ‘std’; did you mean ‘remove_cv’?
npm ERR!   492 |             !std::is_same<Data, std::remove_cv_t<T>>::value>::Perform(data);
npm ERR!       |                                      ^~~~~~~~~~~
npm ERR!       |                                      remove_cv
npm ERR! /home/iobroker/.cache/node-gyp/16.17.1/include/node/v8-internal.h:492:50: error: template argument 2 is invalid
npm ERR!   492 |             !std::is_same<Data, std::remove_cv_t<T>>::value>::Perform(data);
npm ERR!       |                                                  ^
npm ERR! /home/iobroker/.cache/node-gyp/16.17.1/include/node/v8-internal.h:492:63: error: ‘::Perform’ has not been declared
npm ERR!   492 |             !std::is_same<Data, std::remove_cv_t<T>>::value>::Perform(data);
npm ERR!       |                                                               ^~~~~~~
npm ERR! make: *** [openzwave_shared.target.mk:148: Release/obj.target/openzwave_shared/src/callbacks.o] Fehler 1
npm ERR! gyp ERR! build error 
npm ERR! gyp ERR! stack Error: `make` failed with exit code: 2
npm ERR! gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23)
npm ERR! gyp ERR! stack     at ChildProcess.emit (node:events:513:28)
npm ERR! gyp ERR! stack     at Process.ChildProcess._handle.onexit (node:internal/child_process:291:12)
npm ERR! gyp ERR! System Linux 5.15.61-v7l+
npm ERR! gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
npm ERR! gyp ERR! cwd /opt/iobroker/node_modules/openzwave-shared
npm ERR! gyp ERR! node -v v16.17.1
npm ERR! gyp ERR! node-gyp -v v9.0.0
npm ERR! gyp ERR! not ok

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2022-09-30T18_02_11_700Z-debug-0.log
``
[/s]

Thomas Braun

@mr-burns sagte in js-controller lässt sich nicht updaten...:

cd /opt/iobroker
npm ls openzwave-shared

Mr. Burns

@thomas-braun

Das hatte ich vorher ausgeführt...oder?

npm ls openzwave-shared
iobroker.inst@2.0.3 /opt/iobroker
└─┬ iobroker.zwave@2.0.1
  └── openzwave-shared@1.7.2

Thomas Braun

@mr-burns sagte in js-controller lässt sich nicht updaten...:

iobroker.zwave

Wo kommt der denn noch her?

iobroker del zwave

Mr. Burns

@thomas-braun

Habe die beiden adapter über die web Konsole von Biobroker deinstalliert und die beiden befehle noch mal ausgeführt. Mit dem selben Ergebnis.

zwischenzeitlich kam dein neuer post, welchen ich ausgeführt habe, nachdem die Deinstallation (oder der versuch) abgeschlossen war.

Beim letzten hängt er jetzt noch...

iobroker del zwave
Delete adapter "zwave"
host.ioBroker Counted 1 meta of zwave
host.ioBroker Counted 1 adapter for zwave
host.ioBroker file zwave.admin deleted
host.ioBroker object zwave deleted
host.ioBroker object zwave.admin deleted
host.ioBroker Deleting 2 object(s).

Wenn der Biobroker läuft, gehen fast alle adapter bis auf der javascript.0 ist das evtl. noch ein weiteres Symptom?

Thomas Braun

@mr-burns

Irgendwie kann ich dir nicht folgen.

cd /opt/iobroker 
npm ls

Mr. Burns

@thomas-braun @DJMarc75
Danke für eure Unterstützung!
Am Ende hab ich es nicht hinbekommen. Also hab ich eine neue SD-Karte gekauft, neu aufgesetzt und Backup eingespielt.

Es läuft fast alles wieder...schönen Sonntag.

Community Forum

NEWS

js-controller lässt sich nicht updaten...

Support us

373

32.9k

83.0k

1.3m