[Neuer Adapter] Reolink Kamera

oelison

Hallo @idefix01,
Kannst Du mal im Browser folgende Zeile einfügen? :
https://192.168.abc.def/api.cgi?cmd=GetDevInfo&channel=0&user=username&password=supergeheimesPassword
ipaddresse, username und supergeheimesPassword gegen Deine entsprechungen ersetzen. http oder https, je nachdem welches Protokoll aktiv ist und dann das Ergebnis hier posten?
Da sollte sowas wie das folgende raus kommen.

[ { "cmd" : "GetDevInfo", "code" : 0, "value" : { "DevInfo" : { "B485" : 0, "IOInputNum" : 0, "IOOutputNum" : 0, "audioNum" : 1, "buildDay" : "build 22041511", "cfgVer" : "v3.1.0.0", "channelNum" : 1, "detail" : "IPC_111111M8MPS16DE1W0000000000", "diskNum" : 1, "exactType" : "IPC", "firmVer" : "v3.1.0.956_22041511_v1.0.0.30", "frameworkVer" : 1, "hardVer" : "IPC_523128M8MP", "model" : "RLC-823A", "name" : "Camera1", "pakSuffix" : "pak,paks", "serial" : "00000000000000", "type" : "IPC", "wifi" : 0 } } } ]

Idefix01

@oelison

das kommt da raus

[ { "cmd" : "GetDevInfo", "code" : 0, "value" : { "DevInfo" : { "B485" : 0, "IOInputNum" : 0, "IOOutputNum" : 0, "audioNum" : 1, "buildDay" : "build 22041511", "cfgVer" : "v3.1.0.0", "channelNum" : 1, "detail" : "IPC_523128M8MPS16CE1W0110000000", "diskNum" : 1, "exactType" : "IPC", "firmVer" : "v3.1.0.956_22041511_v1.0.0.30", "frameworkVer" : 1, "hardVer" : "IPC_523128M8MP", "model" : "RLC-823A", "name" : "Eingang", "pakSuffix" : "pak,paks", "serial" : "00000000000000", "type" : "IPC", "wifi" : 0 } } } ]

oelison

@idefix01 Hi, Dann muss das aber funktionieren. Ich habe nicht nur die gleiche Kamera, sondern auch die gleiche Firmware. Und bei mir funktioniert alles. Läuft Dein ioBroker im Docker? Irgendwie scheint das dann eher ein Netzwerkproblem zu sein.

Idefix01

@oelison

nein läuft nicht im Docker sondern direkt auf einem Mini-PC. Wie hast du denn den Adapter eingestellt für die Kamera?

oelison

@idefix01 Wichtig sind zwei Punkte:

https oder http
Standart port 443 / 80 oder spezieller
Sonst ist bei Dir alles so wie bei mir.
Der Port, wenn nicht standart, wird einfach an die ip gehängt a.b.c.d:3288

oelison

@idefix01 Aber das sieht doch gut aus.

Idefix01

@oelison

also müssen die Settings alle (Null) sein?

oelison

@Idefix01 Jetzt verstehe ich Deine Frage. Die Daten werden noch nicht gelesen. Die sind nur zum Steuern da. Nur Motion wird noch zusätzlich gelesen. Leider im polling betrieb, da push nicht geht ohne reolink server.

oelison

@idefix01 Ja, schreib einfach mal was rein und Deine Kamera macht das dann.

Idefix01

@oelison

ok verstehe, also alles i.O soweit. Danke

oelison

@idefix01 Ich muss da mal ein Kommentar dran machen, bis wir das Lesen implementiert haben.

Idefix01

@oelison

ok alles klar

Wallsin

Hallo,
Ich habe den Adapter installier und eingerichtet alles super. könnten Sie mir noch erklären wie ich das in der vis alles angezeigt bekomme!
Danke!

oelison

Hallo @wallsin,
Leider hat das noch keiner geschafft ohne transcoding. Unter Linux gibt es da viele Tools. Der Adapter hilft da aber nicht. Gruß Christian.

Wallsin

Vielen dank!

Andy Grundt

Hallo Zusammen,
ich habe jetzt wieder etwas mehr Zeit um mich mit der Adapter-Entwicklung zu beschäftigen.
@oelison hat ja schon viel entwickelt und integriert. VIELEN DANK dafür.

Dazu habe ich jetzt einen neuen minor release veröffentlicht (0.1.0). Dabei wurde der Code etwas aufgeräumt, optimiert und ein paar gewünschte Funktionen integriert:

added getAutoFocus funktion

beim Start, prüft Status von Autofocus

added getIrLight funktion

beim Start, prüft Status von IR Licht

added getWhiteLED function

beim Start, prüft Status von LEDs

added getMailNotification function & setMailNotification function

beim Start, Ein- bzw. Ausschalten der Mail Benachrichtigung

Falls eure Kamera eine der Funktionen nicht unterstützen sollte, wird im Datenpunkt "Error or not supported" angezeigt.

Falls Ihr noch Wünsche habt oder Verbesserungsvorschläge, melde euch.
Ich bin jetzt wieder mehr aktiv.

Danke & viele Grüße
aendue

Hansi1234

@andy-grundt super, dass der Adapter so viel Interesse weckt. Kommst du an den Motion Trigger heran? Also, wenn Bewegung, dann Datenpunkt true?

Andy Grundt

@hansi1234 Motion Detection wird schon gelesen. Findest du unter: reolink.0.sensor.motion

Hansi1234

@andy-grundt ah funktioniert das? Geht auch Mensch, Fahrzeug , Tiererkennung?

da_Woody

@andy-grundt autsch, hab über git die neue version eingespielt.

host.ioBroker
2022-10-25 19:47:34.662	warn	Do not restart adapter system.adapter.reolink.0 because restart loop detected
host.ioBroker
2022-10-25 19:47:34.662	error	instance system.adapter.reolink.0 terminated with code 6 (UNCAUGHT_EXCEPTION)

reolink.0
2022-10-25 19:47:33.970	warn	Terminated (UNCAUGHT_EXCEPTION): Without reason

reolink.0
2022-10-25 19:47:33.968	error	Cannot read properties of null (reading 'val')

reolink.0
2022-10-25 19:47:33.968	error	TypeError: Cannot read properties of null (reading 'val') at ReoLinkCam.onReady (/opt/iobroker/node_modules/iobroker.reolink/main.js:67:36)

reolink.0
2022-10-25 19:47:33.968	error	unhandled promise rejection: Cannot read properties of null (reading 'val')

reolink.0
2022-10-25 19:47:33.967	error	Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
host.ioBroker
2022-10-25 19:47:02.266	error	instance system.adapter.reolink.0 terminated with code 6 (UNCAUGHT_EXCEPTION)

reolink.0
2022-10-25 19:47:01.628	warn	Terminated (UNCAUGHT_EXCEPTION): Without reason

reolink.0
2022-10-25 19:47:01.626	error	Cannot read properties of null (reading 'val')

reolink.0
2022-10-25 19:47:01.625	error	TypeError: Cannot read properties of null (reading 'val') at ReoLinkCam.onReady (/opt/iobroker/node_modules/iobroker.reolink/main.js:67:36)

reolink.0
2022-10-25 19:47:01.625	error	unhandled promise rejection: Cannot read properties of null (reading 'val')

reolink.0
2022-10-25 19:47:01.624	error	Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
host.ioBroker
2022-10-25 19:46:39.189	error	instance system.adapter.reolink.0 terminated with code 6 (UNCAUGHT_EXCEPTION)

reolink.0
2022-10-25 19:46:38.565	warn	Terminated (UNCAUGHT_EXCEPTION): Without reason

reolink.0
2022-10-25 19:46:38.556	error	Cannot read properties of null (reading 'val')

reolink.0
2022-10-25 19:46:38.556	error	TypeError: Cannot read properties of null (reading 'val') at ReoLinkCam.onReady (/opt/iobroker/node_modules/iobroker.reolink/main.js:67:36)

reolink.0
2022-10-25 19:46:38.555	error	unhandled promise rejection: Cannot read properties of null (reading 'val')

reolink.0
2022-10-25 19:46:38.554	error	Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
host.ioBroker
2022-10-25 19:46:31.252	warn	Do not restart adapter system.adapter.reolink.2 because restart loop detected
host.ioBroker
2022-10-25 19:46:31.251	error	instance system.adapter.reolink.2 terminated with code 6 (UNCAUGHT_EXCEPTION)
host.ioBroker
2022-10-25 19:46:30.973	warn	Do not restart adapter system.adapter.reolink.1 because restart loop detected
host.ioBroker
2022-10-25 19:46:30.973	error	instance system.adapter.reolink.1 terminated with code 6 (UNCAUGHT_EXCEPTION)
host.ioBroker
2022-10-25 19:46:30.807	warn	Do not restart adapter system.adapter.reolink.0 because restart loop detected
host.ioBroker
2022-10-25 19:46:30.807	error	instance system.adapter.reolink.0 terminated with code 6 (UNCAUGHT_EXCEPTION)

reolink.2
2022-10-25 19:46:30.379	warn	Terminated (UNCAUGHT_EXCEPTION): Without reason

reolink.2
2022-10-25 19:46:30.360	error	Cannot read properties of null (reading 'val')

reolink.2
2022-10-25 19:46:30.360	error	TypeError: Cannot read properties of null (reading 'val') at ReoLinkCam.onReady (/opt/iobroker/node_modules/iobroker.reolink/main.js:67:36)

reolink.2
2022-10-25 19:46:30.359	error	unhandled promise rejection: Cannot read properties of null (reading 'val')

reolink.2
2022-10-25 19:46:30.355	error	Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().

reolink.1
2022-10-25 19:46:30.318	warn	Terminated (UNCAUGHT_EXCEPTION): Without reason

reolink.1
2022-10-25 19:46:30.288	error	Cannot read properties of null (reading 'val')

reolink.1
2022-10-25 19:46:30.281	error	TypeError: Cannot read properties of null (reading 'val') at ReoLinkCam.onReady (/opt/iobroker/node_modules/iobroker.reolink/main.js:67:36)

reolink.1
2022-10-25 19:46:30.272	error	unhandled promise rejection: Cannot read properties of null (reading 'val')

reolink.1
2022-10-25 19:46:30.267	error	Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().

reolink.0
2022-10-25 19:46:30.182	warn	Terminated (UNCAUGHT_EXCEPTION): Without reason

reolink.0
2022-10-25 19:46:30.151	error	Cannot read properties of null (reading 'val')

reolink.0
2022-10-25 19:46:30.151	error	TypeError: Cannot read properties of null (reading 'val') at ReoLinkCam.onReady (/opt/iobroker/node_modules/iobroker.reolink/main.js:67:36)

reolink.0
2022-10-25 19:46:30.150	error	unhandled promise rejection: Cannot read properties of null (reading 'val')

reolink.0
2022-10-25 19:46:30.148	error	Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
host.ioBroker
2022-10-25 19:45:55.574	error	instance system.adapter.reolink.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
host.ioBroker
2022-10-25 19:45:55.345	error	instance system.adapter.reolink.1 terminated with code 6 (UNCAUGHT_EXCEPTION)
host.ioBroker
2022-10-25 19:45:55.186	error	instance system.adapter.reolink.2 terminated with code 6 (UNCAUGHT_EXCEPTION)

reolink.0
2022-10-25 19:45:54.772	warn	Terminated (UNCAUGHT_EXCEPTION): Without reason

reolink.0
2022-10-25 19:45:54.766	error	Cannot read properties of null (reading 'val')

reolink.0
2022-10-25 19:45:54.766	error	TypeError: Cannot read properties of null (reading 'val') at ReoLinkCam.onReady (/opt/iobroker/node_modules/iobroker.reolink/main.js:67:36)

reolink.0
2022-10-25 19:45:54.765	error	unhandled promise rejection: Cannot read properties of null (reading 'val')

reolink.0
2022-10-25 19:45:54.764	error	Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().

reolink.1
2022-10-25 19:45:54.665	warn	Terminated (UNCAUGHT_EXCEPTION): Without reason

reolink.1
2022-10-25 19:45:54.631	error	Cannot read properties of null (reading 'val')

reolink.1
2022-10-25 19:45:54.631	error	TypeError: Cannot read properties of null (reading 'val') at ReoLinkCam.onReady (/opt/iobroker/node_modules/iobroker.reolink/main.js:67:36)

reolink.1
2022-10-25 19:45:54.630	error	unhandled promise rejection: Cannot read properties of null (reading 'val')

reolink.1
2022-10-25 19:45:54.629	error	Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().

reolink.2
2022-10-25 19:45:54.550	warn	Terminated (UNCAUGHT_EXCEPTION): Without reason

reolink.2
2022-10-25 19:45:54.526	error	Cannot read properties of null (reading 'val')

reolink.2
2022-10-25 19:45:54.523	error	TypeError: Cannot read properties of null (reading 'val') at ReoLinkCam.onReady (/opt/iobroker/node_modules/iobroker.reolink/main.js:67:36)

reolink.2
2022-10-25 19:45:54.522	error	unhandled promise rejection: Cannot read properties of null (reading 'val')

reolink.2
2022-10-25 19:45:54.518	error	Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
host.ioBroker
2022-10-25 19:45:20.651	error	instance system.adapter.reolink.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
host.ioBroker
2022-10-25 19:45:20.547	error	instance system.adapter.reolink.1 terminated with code 6 (UNCAUGHT_EXCEPTION)
host.ioBroker
2022-10-25 19:45:20.251	error	instance system.adapter.reolink.2 terminated with code 6 (UNCAUGHT_EXCEPTION)

reolink.1
2022-10-25 19:45:19.913	warn	Terminated (UNCAUGHT_EXCEPTION): Without reason

reolink.0
2022-10-25 19:45:19.910	warn	Terminated (UNCAUGHT_EXCEPTION): Without reason

reolink.1
2022-10-25 19:45:19.895	error	Cannot read properties of null (reading 'val')

Community Forum

NEWS

[Neuer Adapter] Reolink Kamera

Support us

573

32.7k

82.5k

1.3m