[HowTo] ioBroker unter Docker auf Synology DiskStation

Glasfaser

@divedancer sagte in [HowTo] ioBroker unter Docker auf Synology DiskStation:

...einen einfachen Fix?

Nein , Meldung nicht beachten !

DiveDancer

@glasfaser sagte in [HowTo] ioBroker unter Docker auf Synology DiskStation:

@divedancer sagte in [HowTo] ioBroker unter Docker auf Synology DiskStation:

...einen einfachen Fix?

Nein , Meldung nicht beachten !

...aber das Backup wird nicht 'umgesetzt'

Glasfaser

@divedancer sagte in [HowTo] ioBroker unter Docker auf Synology DiskStation:

...aber das Backup wird nicht 'umgesetzt'

Hat aber nicht´s mit dieser Meldung zu tun.

Was ich nicht verstehe , wo hast du die Ausgabe her , das nur zwave erscheint , obwohl oben nur drei Adapter zu sehen sind ?

Adapter    "zwave2"        : 1.9.3    
root@RasPi4b:/opt/iobroker# iobroker version

DiveDancer

@glasfaser sagte in [HowTo] ioBroker unter Docker auf Synology DiskStation:

@divedancer sagte in [HowTo] ioBroker unter Docker auf Synology DiskStation:

...aber das Backup wird nicht 'umgesetzt'

Hat aber nicht´s mit dieser Meldung zu tun.

Was ich nicht verstehe , wo hast du die Ausgabe her , das nur zwave erscheint , obwohl oben nur drei Adapter zu sehen sind ?
Adapter    "zwave2"        : 1.9.3    
root@RasPi4b:/opt/iobroker# iobroker version

Das hab ich nur abgehackt.
alle Adapter sind aufgelistet.

Meine Thread war eh schon so lang :-(

DiveDancer

root@RasPi4b:/opt/iobroker# iobroker update
Used repository: stable
hash unchanged, use cached sources
update done
Adapter    "admin"         : 4.2.1    , installed 4.2.1
Adapter    "alarm"         : 2.0.1    
Adapter    "alexa2"        : 3.9.0    
Adapter    "alias-manager" : 1.2.1    
Adapter    "alpha2"        : 1.0.0    
Adapter    "amazon-dash"   : 1.1.0    
Adapter    "artnet"        : 1.2.2    
Adapter    "asterisk"      : 1.0.6    
Adapter    "asuswrt"       : 1.0.1    
Adapter    "b-control-em"  : 0.2.1    
Adapter    "backitup"      : 2.1.11   , installed 2.1.11
Adapter    "beckhoff"      : 1.4.0    
Adapter    "benq"          : 0.2.4    
Adapter    "binance"       : 1.1.3    
Adapter    "ble"           : 0.12.0   
Adapter    "bluelink"      : 1.0.4    
Adapter    "bmw"           : 1.3.3    
Adapter    "bosesoundtouch": 0.9.3    
Adapter    "botvac"        : 1.0.0    
Adapter    "bring"         : 1.7.7    
Adapter    "broadlink2"    : 2.0.3    
Adapter    "bsblan"        : 0.2.2    
Adapter    "bshb"          : 0.1.13   
Adapter    "bydbatt"       : 1.0.5    
Adapter    "chromecast"    : 2.3.1    
Adapter    "cloud"         : 4.0.10   
Adapter    "comfoair"      : 1.1.3    
Adapter    "contactid"     : 1.0.2    
Adapter    "coronavirus-statistics": 0.6.3   
Adapter    "countdown"     : 1.2.3    
Adapter    "cul"           : 1.3.5    
Adapter    "daikin"        : 1.3.1    
Adapter    "daswetter"     : 3.0.7    
Adapter    "deconz"        : 1.3.11   
Adapter    "denon"         : 1.10.7   
Adapter    "device-reminder": 1.2.1   
Adapter    "devices"       : 0.3.16   
Adapter    "digitalstrom"  : 2.2.0    
Adapter    "discovergy"    : 0.5.4    
Adapter    "discovery"     : 2.6.1    , installed 2.6.1
Adapter    "divera247"     : 0.1.2    
Adapter    "doorio"        : 2.0.1    
Adapter    "ds18b20"       : 1.4.1    
Adapter    "dwd"           : 2.7.5    
Adapter    "dysonairpurifier": 0.9.1   
Adapter    "easee"         : 1.0.2    
Adapter    "ebus"          : 2.2.5    
Adapter    "echarts"       : 0.4.11   
Adapter    "ecovacs-deebot": 1.1.1    
Adapter    "egigeozone"    : 0.1.2    
Adapter    "ekey"          : 1.1.0    
Adapter    "email"         : 1.0.9    
Adapter    "emby"          : 1.0.2    
Adapter    "energymanager" : 1.2.3    
Adapter    "enet"          : 1.0.1    
Adapter    "epson_ecotank_et_2750": 0.0.5   
Adapter    "epson_stylus_px830": 0.2.1   
Adapter    "epson_xp540"   : 1.0.6    
Adapter    "exchangerates" : 0.0.14   
Adapter    "fahrplan"      : 1.0.7    
Adapter    "fakeroku"      : 0.2.1    
Adapter    "fb-checkpresence": 1.1.4   
Adapter    "feiertage"     : 1.0.17   
Adapter    "fhem"          : 1.6.0    
Adapter    "find-my-iphone": 0.2.15   
Adapter    "firetv"        : 1.0.0    
Adapter    "flot"          : 1.10.6   
Adapter    "followthesun"  : 0.3.4    
Adapter    "foobar2000"    : 2.0.4    
Adapter    "fritzbox"      : 0.2.1    
Adapter    "fritzdect"     : 2.1.11   
Adapter    "fronius"       : 1.0.5    
Adapter    "frontier_silicon": 0.0.10  
Adapter    "fuelpricemonitor": 0.2.5   
Adapter    "fullcalendar"  : 1.1.0    
Adapter    "fullybrowser"  : 2.0.8    
Adapter    "g-homa"        : 0.5.3    
Adapter    "geofency"      : 1.0.3    
Adapter    "go-e"          : 1.0.4    
Adapter    "growatt"       : 1.0.1    
Adapter    "gruenbeck"     : 0.0.29   
Adapter    "haassohn"      : 1.0.3    
Adapter    "habpanel"      : 0.4.3    
Adapter    "haier"         : 1.0.4    
Adapter    "ham"           : 4.0.2    
Adapter    "ham-wemo"      : 2.0.0    
Adapter    "harmony"       : 1.2.2    
Adapter    "heatingcontrol": 2.3.2    
Adapter    "heos"          : 1.8.0    
Adapter    "heytech"       : 1.0.0    
Adapter    "hid"           : 0.1.17   
Adapter    "history"       : 1.9.12   
Adapter    "hm-rega"       : 3.0.16   
Adapter    "hm-rpc"        : 1.14.37  
Adapter    "hmip"          : 1.12.1   
Adapter    "homeconnect"   : 0.0.32   
Adapter    "homee"         : 1.1.1    
Adapter    "homepilot"     : 1.0.3    
Adapter    "hp-ilo"        : 1.0.6    
Adapter    "hs100"         : 2.0.3    
Adapter    "hue"           : 3.5.15   
Adapter    "hue-extended"  : 2.0.0    
Adapter    "i2c"           : 1.2.0    
Adapter    "ical"          : 1.7.4    
Adapter    "icons-addictive-flavour-png": 0.1.0   
Adapter    "icons-fatcow-hosting": 0.1.0   
Adapter    "icons-icons8"  : 0.0.1    
Adapter    "icons-material-png": 0.1.0   
Adapter    "icons-material-svg": 0.1.0   
Adapter    "icons-mfd-png" : 1.0.2    
Adapter    "icons-mfd-svg" : 1.0.2    
Adapter    "icons-open-icon-library-png": 0.1.2   
Adapter    "icons-ultimate-png": 1.0.1   
Adapter    "influxdb"      : 1.9.5    
Adapter    "info"          : 1.7.14   , installed 1.7.14
Adapter    "innogy-smarthome": 0.3.6   
Adapter    "iogo"          : 0.6.5    
Adapter    "iot"           : 1.8.16   
Adapter    "iqontrol"      : 1.6.4    
Adapter    "jarvis"        : 2.1.0    
Adapter    "javascript"    : 5.1.3    
Adapter    "jeelink"       : 0.1.0    
Controller "js-controller" : 3.2.16   , installed 3.2.16
Adapter    "kecontact"     : 1.1.2    
Adapter    "klf200"        : 1.0.1    
Adapter    "km200"         : 1.1.6    
Adapter    "knmi-weather"  : 1.0.0    
Adapter    "knx"           : 1.0.45   
Adapter    "kodi"          : 2.0.5    
Adapter    "kostal-piko-ba": 1.1.8    
Adapter    "kress"         : 2.5.5    
Adapter    "lametric"      : 1.2.0    
Adapter    "landroid"      : 1.0.3    
Adapter    "lcn"           : 1.0.2    
Adapter    "legrand-ecocompteur": 1.0.0   
Adapter    "letrika_comgw" : 0.0.5    
Adapter    "lg-ess-home"   : 0.0.10   
Adapter    "lgtv"          : 1.1.10   
Adapter    "lgtv-rs"       : 0.1.1    
Adapter    "lgtv11"        : 1.0.5    
Adapter    "lifx"          : 0.1.0    
Adapter    "lightify"      : 0.2.16   
Adapter    "link"          : 0.5.10   
Adapter    "linkeddevices" : 1.4.3    
Adapter    "linktap"       : 0.1.8    
Adapter    "linux-control" : 1.1.2    
Adapter    "logparser"     : 1.1.0    
Adapter    "lovelace"      : 1.0.16   
Adapter    "loxone"        : 2.1.0    
Adapter    "luftdaten"     : 1.0.2    
Adapter    "lupusec"       : 1.3.4    
Adapter    "luxtronik1"    : 0.3.1    
Adapter    "material"      : 0.13.9   
Adapter    "maxcube"       : 1.0.3    
Adapter    "maxcul"        : 1.3.1    
Adapter    "mbus"          : 2.3.4    
Adapter    "mclighting"    : 0.1.2    
Adapter    "megad"         : 1.2.1    
Adapter    "megadd"        : 0.2.0    
Adapter    "megaesp"       : 0.1.0    
Adapter    "melcloud"      : 1.1.4    
Adapter    "mercedesme"    : 0.0.50   
Adapter    "mercury"       : 0.1.4    
Adapter    "meross"        : 1.6.2    
Adapter    "meteoalarm"    : 1.2.0    
Adapter    "midea"         : 0.0.6    
Adapter    "miele"         : 0.1.5    
Adapter    "mielecloudservice": 4.2.0   
Adapter    "mihome"        : 1.3.7    
Adapter    "mihome-lamp"   : 1.1.0    
Adapter    "mihome-plug"   : 0.2.1    
Adapter    "mihome-vacuum" : 2.1.1    
Adapter    "mikrotik"      : 1.0.16   
Adapter    "milight"       : 0.3.6    
Adapter    "milight-smart-light": 1.2.0   
Adapter    "minuvis"       : 1.4.0    
Adapter    "mobile"        : 1.0.1    
Adapter    "modbus"        : 3.2.6    
Adapter    "moma"          : 1.2.8    
Adapter    "mpd"           : 1.0.6    
Adapter    "mqtt"          : 2.4.0    
Adapter    "mqtt-client"   : 1.3.1    
Adapter    "musiccast"     : 0.1.5    
Adapter    "mydlink"       : 1.1.7    
Adapter    "mysensors"     : 2.0.1    
Adapter    "nanoleaf-lightpanels": 1.2.0   
Adapter    "net-tools"     : 0.1.2    
Adapter    "netatmo"       : 1.3.3    
Adapter    "netatmo-crawler": 0.4.1   
Adapter    "nibeuplink"    : 0.4.0    
Adapter    "nina"          : 0.0.24   
Adapter    "node-red"      : 2.3.0    
Adapter    "nuki"          : 1.4.3    
Adapter    "nuki-extended" : 2.3.0    
Adapter    "nut"           : 1.5.0    
Adapter    "octoprint"     : 1.0.8    
Adapter    "odl"           : 1.1.4    
Adapter    "oilfox"        : 0.0.5    
Adapter    "omnicomm-lls"  : 0.0.7    
Adapter    "onkyo"         : 2.0.5    
Adapter    "onvif"         : 0.4.4    
Adapter    "openhab"       : 1.1.0    
Adapter    "openligadb"    : 1.1.0    
Adapter    "openweathermap": 0.1.0    
Adapter    "opi"           : 0.1.1    
Adapter    "oppoplayer"    : 0.2.4    
Adapter    "owfs"          : 0.6.4    
Adapter    "owntracks"     : 1.0.0    
Adapter    "panasonic-viera": 1.0.2   
Adapter    "parser"        : 1.0.7    
Adapter    "paw"           : 0.0.7    
Adapter    "pegelalarm"    : 1.2.0    
Adapter    "phantomjs"     : 1.1.2    
Adapter    "pi-hole"       : 1.3.1    
Adapter    "piface"        : 1.0.0    
Adapter    "pimatic"       : 0.3.0    
Adapter    "ping"          : 1.4.12   
Adapter    "places"        : 1.0.0    
Adapter    "plenticore"    : 2.1.6    
Adapter    "plex"          : 0.8.11   
Adapter    "plexconnect"   : 0.0.7    
Adapter    "pollenflug"    : 1.0.6    
Adapter    "proxmox"       : 1.3.3    
Adapter    "proxy"         : 1.2.2    
Adapter    "pushbullet"    : 0.0.11   
Adapter    "pushover"      : 2.0.3    
Adapter    "pushsafer"     : 1.0.3    
Adapter    "radar2"        : 1.0.9    
Adapter    "radiohead"     : 1.1.1    
Adapter    "rflink"        : 2.1.6    
Adapter    "rickshaw"      : 1.0.0    
Adapter    "ring"          : 1.1.3    
Adapter    "robonect"      : 0.1.3    
Adapter    "roomba"        : 1.1.1    
Adapter    "rpi2"          : 1.2.0    
Adapter    "s7"            : 1.2.5    
Adapter    "sainlogic"     : 0.6.6    
Adapter    "samsung"       : 0.2.9    
Adapter    "sanext"        : 0.0.5    
Adapter    "sayit"         : 1.12.2   
Adapter    "sbfspot"       : 4.0.5    
Adapter    "scenes"        : 2.3.6    
Adapter    "schoolfree"    : 1.0.0    
Adapter    "schwoerer-ventcube": 1.4.1   
Adapter    "seq"           : 0.2.10   
Adapter    "shelly"        : 4.0.7    
Adapter    "shuttercontrol": 1.2.0    
Adapter    "sia"           : 1.0.4    
Adapter    "siegenia"      : 1.1.0    
Adapter    "simple-api"    : 2.6.1    
Adapter    "smappee"       : 0.2.4    
Adapter    "smartcontrol"  : 1.2.1    
Adapter    "smartgarden"   : 1.0.5    
Adapter    "smartmeter"    : 3.2.1    
Adapter    "snips"         : 1.5.1    
Adapter    "snmp"          : 0.5.0    
Adapter    "socketio"      : 3.1.4    
Adapter    "solarlog"      : 2.1.2    
Adapter    "solarviewdatareader": 1.0.2   
Adapter    "solarwetter"   : 1.0.0    
Adapter    "sonnen"        : 1.7.3    
Adapter    "sonoff"        : 2.4.0    
Adapter    "sonos"         : 2.1.1    
Adapter    "sony-bravia"   : 1.0.1    
Adapter    "spotify-premium": 1.0.0   
Adapter    "sprinklecontrol": 0.1.7   
Adapter    "sql"           : 1.15.7   
Adapter    "squeezebox"    : 1.0.0    
Adapter    "squeezeboxrpc" : 1.3.4    
Adapter    "starline"      : 1.1.3    
Adapter    "statistics"    : 1.0.4    
Adapter    "stiebel-isg"   : 1.6.0    
Adapter    "sunnyportal"   : 0.1.5    
Adapter    "swiss-weather-api": 0.3.2   
Adapter    "synology"      : 1.0.0    
Adapter    "systeminfo"    : 0.3.1    
Adapter    "tahoma"        : 0.3.2    
Adapter    "tankerkoenig"  : 2.0.5    
Adapter    "telegram"      : 1.8.1    
Adapter    "terminal"      : 0.1.2    
Adapter    "tesla-motors"  : 0.4.2    
Adapter    "text2command"  : 2.0.7    
Adapter    "tinker"        : 1.1.0    
Adapter    "tr-064"        : 4.2.12   
Adapter    "traccar"       : 0.0.9    
Adapter    "tradfri"       : 2.7.2    
Adapter    "trashschedule" : 1.1.1    
Adapter    "tunnelbroker-endpoint-updater": 0.0.1   
Adapter    "tuya"          : 3.6.2    
Adapter    "tvprogram"     : 1.1.0    
Adapter    "tvspielfilm"   : 1.0.4    
Adapter    "unifi"         : 0.5.8    
Adapter    "upnp"          : 1.0.17   
Adapter    "vaillant"      : 0.0.11   
Adapter    "valloxmv"      : 1.1.2    
Adapter    "vcard"         : 0.0.9    
Adapter    "velux"         : 0.0.7    
Adapter    "viessmann"     : 1.3.4    
Adapter    "virtualpowermeter": 1.4.2   
Adapter    "vis"           : 1.3.8    
Adapter    "vis-bars"      : 0.1.4    
Adapter    "vis-canvas-gauges": 0.1.5   
Adapter    "vis-colorpicker": 1.2.0   
Adapter    "vis-fancyswitch": 1.1.0   
Adapter    "vis-google-fonts": 0.1.0   
Adapter    "vis-history"   : 1.0.0    
Adapter    "vis-hqwidgets" : 1.1.7    
Adapter    "vis-icontwo"   : 0.69.0   
Adapter    "vis-inventwo"  : 2.8.3    
Adapter    "vis-jqui-mfd"  : 1.0.12   
Adapter    "vis-justgage"  : 1.0.2    
Adapter    "vis-keyboard"  : 0.0.2    
Adapter    "vis-lcars"     : 1.0.4    
Adapter    "vis-map"       : 1.0.4    
Adapter    "vis-material-advanced": 1.7.0   
Adapter    "vis-metro"     : 1.1.2    
Adapter    "vis-players"   : 0.1.6    
Adapter    "vis-plumb"     : 1.0.2    
Adapter    "vis-rgraph"    : 0.0.2    
Adapter    "vis-timeandweather": 1.1.7   
Adapter    "vis-weather"   : 2.5.3    
Adapter    "volumio"       : 0.1.2    
Adapter    "volvo"         : 0.0.3    
Adapter    "vr200"         : 1.0.0    
Adapter    "vw-connect"    : 0.0.30   
Adapter    "weatherunderground": 3.3.0   
Adapter    "web"           : 3.4.0    
Adapter    "weishaupt-wem" : 0.0.9    
Adapter    "whatsapp-cmb"  : 0.1.6    
Adapter    "wiffi-wz"      : 2.2.0    
Adapter    "wifilight"     : 1.1.0    
Adapter    "windows-control": 0.1.5   
Adapter    "wled"          : 0.5.6    
Adapter    "wm-bus"        : 0.1.12   
Adapter    "wolf"          : 1.2.1    
Adapter    "worx"          : 1.3.6    
Adapter    "xbox"          : 0.7.7    
Adapter    "xs1"           : 1.0.2    
Adapter    "yahka"         : 0.12.0   
Adapter    "yamaha"        : 0.4.0    
Adapter    "yeelight-2"    : 1.0.3    
Adapter    "youtube"       : 1.0.3    
Adapter    "yr"            : 2.0.3    
Adapter    "zigbee"        : 1.5.6    
Adapter    "zont"          : 0.5.3    
Adapter    "zwave2"        : 1.9.3

fastfoot

@divedancer sagte in [HowTo] ioBroker unter Docker auf Synology DiskStation:

Gibt es hierfür...
Fixing "sudo-bug" by replacing sudo in iobroker with gosu... Done.
...einen einfachen Fix?

Warum willst du einen Fix fixen? Das ist nur eine Info dass im Container sudo durch gosu ersetzt wurde

DiveDancer

@fastfoot sagte in [HowTo] ioBroker unter Docker auf Synology DiskStation:

@divedancer sagte in [HowTo] ioBroker unter Docker auf Synology DiskStation:

Gibt es hierfür...
Fixing "sudo-bug" by replacing sudo in iobroker with gosu... Done.
...einen einfachen Fix?

Warum willst du einen Fix fixen? Das ist nur eine Info dass im Container sudo durch gosu ersetzt wurde

Ich hatte dass so aufgefasst, als wenn wegen 'Berechtigungen' das Backup ungenutzt bleibt.

Ich will doch nur, dass mein Backup beim Container erstellen 'aktiviert' wird.

fastfoot

@divedancer sagte in [HowTo] ioBroker unter Docker auf Synology DiskStation:

Ich will doch nur, dass mein Backup beim Container erstellen 'aktiviert' wird.

Dazu muss das file aber in /opt/iobroker liegen, nicht in /opt/iobroker/backup. Der gesamte Ordner muss dazu auch leer sein(außer dem Backupfile).

Du kannst es jetzt aber auch so einspielen:

pkill -u iobroker
iobroker restore 0 (oder iobroker restore backupfilename)
Neustart des Containers und Warten bis Adapter installiert wurden

DiveDancer

@fastfoot sagte in [HowTo] ioBroker unter Docker auf Synology DiskStation:

@divedancer sagte in [HowTo] ioBroker unter Docker auf Synology DiskStation:

Ich will doch nur, dass mein Backup beim Container erstellen 'aktiviert' wird.

Dazu muss das file aber in /opt/iobroker liegen, nicht in /opt/iobroker/backup. Der gesamte Ordner muss dazu auch leer sein(außer dem Backupfile).

Du kannst es jetzt aber auch so einspielen:

pkill -u iobroker

iobroker restore 0 (oder iobroker restore backupfilename)

Neustart des Containers und Warten bis Adapter installiert wurden

Das scheint weder in der Container Console, noch in Putty zu funktionieren.
Das Backup hatte ich im Host Pfad abgelegt.
/opt/iobroker/backups/

DiveDancer

SSH erkennt verständlicher weise den Befehl 'iobroker' nicht.

In der Container Console erreiche in den Host Pfad nicht.

fastfoot

@divedancer sagte in [HowTo] ioBroker unter Docker auf Synology DiskStation:

SSH erkennt verständlicher weise den Befehl 'iobroker' nicht.

In der Container Console erreiche in den Host Pfad nicht.

was heisst denn scheint? wenn dein Backup dort liegt dann funktioniert es genau wie beschrieben, natürlich von der Containerkonsole aus

DiveDancer

Dazu muss das file aber in /opt/iobroker liegen, nicht in /opt/iobroker/backup. Der gesamte Ordner muss dazu auch leer sein(außer dem Backupfile).

Ich hab vor dem Container Neustart das Backup in den iobroker Ordner verschobe und den backups Ordner gelöscht.
Das Ergebnis ist leider das selbe.
Das Backup läuft nicht.

-----       Welcome to your ioBroker-container!        -----
-----          Startupscript is now running.           -----
-----                Please be patient!                -----
------------------------------------------------------------
 
------------------------------------------------------------
-----              Debugging information               -----
-----                                                  -----
-----                      System                      -----
-----               arch:      armv7l                  -----
-----                                                  -----
-----                     Versions                     -----
-----               image:     v5.1.0                  -----
-----               node:      v12.22.1                -----
-----               npm:       6.14.12                 -----
-----                                                  -----
-----                       ENV                        -----
-----               PACKAGES:  nano                    -----
-----               SETGID:    1000                    -----
-----               SETUID:    1000                    -----
-----               USBDEVICES: /dev/serial/by-id/      -----
-----               ZWAVE:     false                   -----
------------------------------------------------------------
 
------------------------------------------------------------
-----         Step 1 of 5: Preparing container         -----
------------------------------------------------------------
 
Installing additional packages is set by ENV.
The following packages will be installed: nano...
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76, <> line 1.)
debconf: falling back to frontend: Readline
Selecting previously unselected package nano.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 25575 files and directories currently installed.)
Preparing to unpack .../archives/nano_3.2-3_armhf.deb ...
Unpacking nano (3.2-3) ...
Setting up nano (3.2-3) ...
update-alternatives: using /bin/nano to provide /usr/bin/editor (editor) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/editor.1.gz because associated file /usr/share/man/man1/nano.1.gz (of link group editor) doesn't exist
update-alternatives: using /bin/nano to provide /usr/bin/pico (pico) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/pico.1.gz because associated file /usr/share/man/man1/nano.1.gz (of link group pico) doesn't exist
Done.
 
Registering maintenance script as command.
Done.
 
------------------------------------------------------------
-----   Step 2 of 5: Detecting ioBroker installation   -----
------------------------------------------------------------
 
Existing installation of ioBroker detected in /opt/iobroker.
 
------------------------------------------------------------
-----   Step 3 of 5: Checking ioBroker installation    -----
------------------------------------------------------------
 
(Re)Setting folder permissions (This might take a while! Please be patient!)...
Done.
 
Fixing "sudo-bug" by replacing sudo in iobroker with gosu...
Done.
 
Hostname in ioBroker does not match the hostname of this container.
Updating hostname to  RasPi4b...
The host for instance "system.adapter.admin.0" was changed from "c9b7b12a8335" to "RasPi4b".
The host for instance "system.adapter.discovery.0" was changed from "c9b7b12a8335" to "RasPi4b".
The host for instance "system.adapter.info.0" was changed from "c9b7b12a8335" to "RasPi4b".
Done.
 
------------------------------------------------------------
-----      Step 4 of 5: Applying special settings      -----
------------------------------------------------------------
 
Some adapters have special requirements/ settings which can be activated by the use of environment variables.
For more information take a look at readme.md on Github!
 
Usb-device-support is activated by ENV.
Setting permissions for /dev/serial/by-id/...
Done.
 
------------------------------------------------------------
-----          Step 5 of 5: ioBroker startup           -----
------------------------------------------------------------
 
Starting ioBroker...
 
host.RasPi4b check instance "system.adapter.admin.0" for host "RasPi4b"
host.RasPi4b check instance "system.adapter.discovery.0" for host "RasPi4b"
host.RasPi4b check instance "system.adapter.info.0" for host "RasPi4b"
Send diag info: {"uuid":"ab265f4a-67f9-a46a-c0b2-61e4b95cefe5","language":"","country":"","hosts":[{"version":"3.2.16","platform":"Javascript/Node.js","type":"linux"}],"node":"v12.22.1","arch":"arm","adapters":{"admin":{"version":"4.2.1","platform":"Javascript/Node.js"},"discovery":{"version":"2.6.1","platform":"Javascript/Node.js"},"info":{"version":"1.7.14","platform":"Javascript/Node.js"}},"statesType":"file","objectsType":"file","model":"ARMv7 Processor rev 3 (v7l)","cpus":4,"mem":4013191168,"ostype":"Linux","city":""}
hash changed or no sources cached => force download of new sources
ls: cannot access '/dev/disk/by-id/': No such file or directory

ls: cannot access '/dev/disk/by-id/': No such file or directory

Send diag info: {"uuid":"ab265f4a-67f9-a46a-c0b2-61e4b95cefe5","language":"","country":"","hosts":[{"version":"3.2.16","platform":"Javascript/Node.js","type":"linux"}],"node":"v12.22.1","arch":"arm","adapters":{"admin":{"version":"4.2.1","platform":"Javascript/Node.js"},"discovery":{"version":"2.6.1","platform":"Javascript/Node.js"},"info":{"version":"1.7.14","platform":"Javascript/Node.js"}},"statesType":"file","objectsType":"file","model":"ARMv7 Processor rev 3 (v7l)","cpus":4,"mem":4013191168,"ostype":"Linux","city":""}
Send diag info: {"uuid":"ab265f4a-67f9-a46a-c0b2-61e4b95cefe5","language":"de","country":"","hosts":[{"version":"3.2.16","platform":"Javascript/Node.js","type":"linux"}],"node":"v12.22.1","arch":"arm","adapters":{"admin":{"version":"4.2.1","platform":"Javascript/Node.js"},"discovery":{"version":"2.6.1","platform":"Javascript/Node.js"},"info":{"version":"1.7.14","platform":"Javascript/Node.js"}},"statesType":"file","objectsType":"file","model":"ARMv7 Processor rev 3 (v7l)","cpus":4,"mem":4013191168,"ostype":"Linux","city":""}
Send diag info: {"uuid":"ab265f4a-67f9-a46a-c0b2-61e4b95cefe5","language":"de","country":"","hosts":[{"version":"3.2.16","platform":"Javascript/Node.js","type":"linux"}],"node":"v12.22.1","arch":"arm","adapters":{"admin":{"version":"4.2.1","platform":"Javascript/Node.js"},"discovery":{"version":"2.6.1","platform":"Javascript/Node.js"},"info":{"version":"1.7.14","platform":"Javascript/Node.js"}},"statesType":"file","objectsType":"file","model":"ARMv7 Processor rev 3 (v7l)","cpus":4,"mem":4013191168,"ostype":"Linux","city":""}
Send diag info: {"uuid":"ab265f4a-67f9-a46a-c0b2-61e4b95cefe5","language":"de","country":"","hosts":[{"version":"3.2.16","platform":"Javascript/Node.js","type":"linux"}],"node":"v12.22.1","arch":"arm","adapters":{"admin":{"version":"4.2.1","platform":"Javascript/Node.js"},"discovery":{"version":"2.6.1","platform":"Javascript/Node.js"},"info":{"version":"1.7.14","platform":"Javascript/Node.js"}},"statesType":"file","objectsType":"file","model":"ARMv7 Processor rev 3 (v7l)","cpus":4,"mem":4013191168,"ostype":"Linux","city":""}

fastfoot

@divedancer sagte in [HowTo] ioBroker unter Docker auf Synology DiskStation:

Das Backup hatte ich im Host Pfad abgelegt.
/opt/iobroker/backups/

Das ist aber der Containerpfad, bzw. muss es sein. Den Pfad kannst du ja auch mappen

   volumes:
     - /opt/iobroker:/var/lib/docker/volumes/iobrokerdata
    - /opt/iobroker/backups:/var/lib/docker/volumes/iobrokerdata/backups

fastfoot

@divedancer sagte in [HowTo] ioBroker unter Docker auf Synology DiskStation:

Ich hab vor dem Container Neustart das Backup in den iobroker Ordner verschobe und den backups Ordner gelöscht.

Das funktioniert nur beim erstmaligen Start des Containers, danach nie wieder

DiveDancer

In der Container Console erreiche in den Host Pfad nicht.

was heisst denn scheint? wenn dein Backup dort liegt dann funktioniert es genau wie beschrieben, natürlich von der Containerkonsole aus

root@RasPi4b:/opt/iobroker# ls
INSTALLER_INFO.txt  iob  iobroker  iobroker.bak  iobroker-data  log  node_modules  package.json  package-lock.json  reinstall.js
root@RasPi4b:/opt/iobroker# pkill -u iobroker
root@RasPi4b:/opt/iobroker# iobroker restore 0
No matching backup found
host.RasPi4b Cannot find /opt/iobroker/node_modules/iobroker.js-controller/lib/setup/../../../../backups/_backupiobroker.tar.gz
root@RasPi4b:/opt/iobroker# ^C
root@RasPi4b:/opt/iobroker#

:-(

DiveDancer

@fastfoot sagte in [HowTo] ioBroker unter Docker auf Synology DiskStation:

@divedancer sagte in [HowTo] ioBroker unter Docker auf Synology DiskStation:

Ich hab vor dem Container Neustart das Backup in den iobroker Ordner verschobe und den backups Ordner gelöscht.

Das funktioniert nur beim erstmaligen Start des Containers, danach nie wieder

Ich hatte den Container Removed

Und einen neuen erstellt !?

fastfoot

@divedancer

ls /opt/iobroker/backups

DiveDancer

@fastfoot sagte in [HowTo] ioBroker unter Docker auf Synology DiskStation:

ls /opt/iobroker/backups

root@RasPi4b:/opt/iobroker# ls /opt/iobroker/backups
ls: cannot access '/opt/iobroker/backups': No such file or directory
root@RasPi4b:/opt/iobroker#

fastfoot

@divedancer sagte in [HowTo] ioBroker unter Docker auf Synology DiskStation:

Ich hatte den Container Removed
Und einen neuen erstellt !?

/var/lib/docker/volumes/iobrokerdata muss dann leer sein! Das Backupfile dann da rein und starten. Oder einen Backupordner zusätzlich mappen und anschliessend wie gezeigt manuell

DiveDancer

Das ist wohl zu hoch für mich

root@RasPi4b:/opt/iobroker# ls
INSTALLER_INFO.txt  iob  iobroker  iobroker.bak  iobroker-data  log  node_modules  package.json  package-lock.json  reinstall.js
root@RasPi4b:/opt/iobroker# cd
root@RasPi4b:~# cd ..
root@RasPi4b:/# ls
bin  boot  dev  etc  home  lib  media  mnt  opt  proc  root  run  sbin  srv  sys  tmp  usr  var
root@RasPi4b:/# cd var
root@RasPi4b:/var# cd lib
root@RasPi4b:/var/lib# cd docker
root@RasPi4b:/var/lib/docker# cd volumes
root@RasPi4b:/var/lib/docker/volumes# ls
iobrokerdata
root@RasPi4b:/var/lib/docker/volumes# cd iobrokerdata/
root@RasPi4b:/var/lib/docker/volumes/iobrokerdata# ls
backups  iobroker_2021_06_07-02_46_10_Pi4_a_backupiobroker.tar.gz
root@RasPi4b:/var/lib/docker/volumes/iobrokerdata# cd backups
root@RasPi4b:/var/lib/docker/volumes/iobrokerdata/backups# ls
iobroker_2021_06_07-02_46_10_Pi4_a_backupiobroker.tar.gz
root@RasPi4b:/var/lib/docker/volumes/iobrokerdata/backups# pkill -u iobroker
root@RasPi4b:/var/lib/docker/volumes/iobrokerdata/backups# iobroker restore 0
No matching backup found
host.RasPi4b Cannot find /opt/iobroker/node_modules/iobroker.js-controller/lib/setup/../../../../backups/_backupiobroker.tar.gz
root@RasPi4b:/var/lib/docker/volumes/iobrokerdata/backups#

Community Forum

NEWS

[HowTo] ioBroker unter Docker auf Synology DiskStation

Support us

439

32.6k

82.2k

1.3m