[erledigt] Zahl an Serielle senden, wenn es angef. wird.
-
Hallo!
Ich möchte folgendes realisierten:
Wenn über die Serielle der Text "Überschuss?" rein kommt, möchte ich über die Serielle die Zahl 0-9 zurück senden, je nach aktuellem Überschuss. Dass ich aus dem Überschuss die Zahl 0-9 erzeuge funktioniert schon. Aber wie ich diese Zahl dann an die Serielle zurück gebe, habe ich keinen Plan. Ich habe an diese Stelle mal ein Change Node eingefügt, weiß aber nicht so recht, was ich damit anfangen kann. Kann mir bitte jemand auf die Sprünge helfen?[ { "id": "c6d2ee27.55704", "type": "tab", "label": "Flow 1", "disabled": false, "info": "" }, { "id": "22130d0e.04a612", "type": "ioBroker in", "z": "c6d2ee27.55704", "name": "node-red.3.AMIS.Wirkleistung_5min-avg", "topic": "node-red.3.AMIS.Wirkleistung_5min-avg", "payloadType": "value", "onlyack": true, "func": "all", "gap": "", "fireOnStart": "false", "x": 310, "y": 140, "wires": [ [ "5c8464ac.b4dc6c", "c65fbb60.39a348", "9ced4bd2.a3b8c8" ] ] }, { "id": "5c8464ac.b4dc6c", "type": "switch", "z": "c6d2ee27.55704", "name": "", "property": "payload", "propertyType": "msg", "rules": [ { "t": "gte", "v": "1500", "vt": "num" }, { "t": "lt", "v": "100", "vt": "str" } ], "checkall": "false", "repair": false, "outputs": 2, "x": 600, "y": 140, "wires": [ [ "f96543d5.3bb3b" ], [ "4f3f1c45.3e3e34" ] ] }, { "id": "f96543d5.3bb3b", "type": "change", "z": "c6d2ee27.55704", "name": "mehr", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "mehr", "tot": "str" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 810, "y": 100, "wires": [ [ "6fedd985.adf5d8", "2f9347d6.de35a8" ] ] }, { "id": "4f3f1c45.3e3e34", "type": "change", "z": "c6d2ee27.55704", "name": "weniger", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "weniger", "tot": "str" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 820, "y": 140, "wires": [ [ "6fedd985.adf5d8", "2f9347d6.de35a8" ] ] }, { "id": "6fedd985.adf5d8", "type": "serial out", "z": "c6d2ee27.55704", "name": "Arduino_Out", "serial": "716fe4cb.9186dc", "x": 1080, "y": 120, "wires": [] }, { "id": "9107e091.2a6e2", "type": "serial in", "z": "c6d2ee27.55704", "name": "Arduino_In", "serial": "716fe4cb.9186dc", "x": 210, "y": 260, "wires": [ [ "e52bdb45.87f0b8" ] ] }, { "id": "e52bdb45.87f0b8", "type": "switch", "z": "c6d2ee27.55704", "name": "", "property": "payload", "propertyType": "msg", "rules": [ { "t": "cont", "v": "Überschuss?", "vt": "str" } ], "checkall": "true", "repair": false, "outputs": 1, "x": 390, "y": 260, "wires": [ [ "bbb81ca3.5894e" ] ] }, { "id": "bbb81ca3.5894e", "type": "change", "z": "c6d2ee27.55704", "name": "", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "Skalierung_0_9", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 590, "y": 260, "wires": [ [ "6fedd985.adf5d8", "8ce790ea.6727c" ] ] }, { "id": "53b296b4.80cd88", "type": "comment", "z": "c6d2ee27.55704", "name": "Regelung im Betrieb", "info": "", "x": 650, "y": 60, "wires": [] }, { "id": "28cdb90.f395f48", "type": "comment", "z": "c6d2ee27.55704", "name": "Start", "info": "", "x": 450, "y": 220, "wires": [] }, { "id": "2f9347d6.de35a8", "type": "debug", "z": "c6d2ee27.55704", "name": "mehr_weniger", "active": true, "tosidebar": true, "console": false, "tostatus": false, "complete": "payload", "targetType": "msg", "statusVal": "", "statusType": "auto", "x": 1100, "y": 60, "wires": [] }, { "id": "c65fbb60.39a348", "type": "range", "z": "c6d2ee27.55704", "minin": "0", "maxin": "9000", "minout": "0", "maxout": "9", "action": "scale", "round": true, "property": "payload", "name": "Skalierung_0_9", "x": 580, "y": 180, "wires": [ [ "5f2ee4d7.069abc" ] ] }, { "id": "5f2ee4d7.069abc", "type": "debug", "z": "c6d2ee27.55704", "name": "0_9kW", "active": true, "tosidebar": true, "console": false, "tostatus": false, "complete": "payload", "targetType": "msg", "statusVal": "", "statusType": "auto", "x": 740, "y": 180, "wires": [] }, { "id": "9ced4bd2.a3b8c8", "type": "debug", "z": "c6d2ee27.55704", "name": "5min_avg", "active": false, "tosidebar": true, "console": false, "tostatus": false, "complete": "payload", "targetType": "msg", "statusVal": "", "statusType": "auto", "x": 560, "y": 100, "wires": [] }, { "id": "c16f5107.58bef", "type": "inject", "z": "c6d2ee27.55704", "name": "", "props": [ { "p": "payload" } ], "repeat": "", "crontab": "", "once": false, "onceDelay": 0.1, "topic": "", "payload": "2100", "payloadType": "num", "x": 80, "y": 80, "wires": [ [ "9ced4bd2.a3b8c8", "5c8464ac.b4dc6c", "c65fbb60.39a348" ] ] }, { "id": "8ce790ea.6727c", "type": "debug", "z": "c6d2ee27.55704", "name": "", "active": true, "tosidebar": true, "console": false, "tostatus": false, "complete": "false", "statusVal": "", "statusType": "auto", "x": 900, "y": 240, "wires": [] }, { "id": "716fe4cb.9186dc", "type": "serial-port", "serialport": "/dev/ttyUSB0", "serialbaud": "9600", "databits": "8", "parity": "none", "stopbits": "1", "waitfor": "", "dtr": "none", "rts": "none", "cts": "none", "dsr": "none", "newline": "1", "bin": "false", "out": "time", "addchar": "", "responsetimeout": "10000" } ] -
Hallo!
Ich möchte folgendes realisierten:
Wenn über die Serielle der Text "Überschuss?" rein kommt, möchte ich über die Serielle die Zahl 0-9 zurück senden, je nach aktuellem Überschuss. Dass ich aus dem Überschuss die Zahl 0-9 erzeuge funktioniert schon. Aber wie ich diese Zahl dann an die Serielle zurück gebe, habe ich keinen Plan. Ich habe an diese Stelle mal ein Change Node eingefügt, weiß aber nicht so recht, was ich damit anfangen kann. Kann mir bitte jemand auf die Sprünge helfen?[ { "id": "c6d2ee27.55704", "type": "tab", "label": "Flow 1", "disabled": false, "info": "" }, { "id": "22130d0e.04a612", "type": "ioBroker in", "z": "c6d2ee27.55704", "name": "node-red.3.AMIS.Wirkleistung_5min-avg", "topic": "node-red.3.AMIS.Wirkleistung_5min-avg", "payloadType": "value", "onlyack": true, "func": "all", "gap": "", "fireOnStart": "false", "x": 310, "y": 140, "wires": [ [ "5c8464ac.b4dc6c", "c65fbb60.39a348", "9ced4bd2.a3b8c8" ] ] }, { "id": "5c8464ac.b4dc6c", "type": "switch", "z": "c6d2ee27.55704", "name": "", "property": "payload", "propertyType": "msg", "rules": [ { "t": "gte", "v": "1500", "vt": "num" }, { "t": "lt", "v": "100", "vt": "str" } ], "checkall": "false", "repair": false, "outputs": 2, "x": 600, "y": 140, "wires": [ [ "f96543d5.3bb3b" ], [ "4f3f1c45.3e3e34" ] ] }, { "id": "f96543d5.3bb3b", "type": "change", "z": "c6d2ee27.55704", "name": "mehr", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "mehr", "tot": "str" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 810, "y": 100, "wires": [ [ "6fedd985.adf5d8", "2f9347d6.de35a8" ] ] }, { "id": "4f3f1c45.3e3e34", "type": "change", "z": "c6d2ee27.55704", "name": "weniger", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "weniger", "tot": "str" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 820, "y": 140, "wires": [ [ "6fedd985.adf5d8", "2f9347d6.de35a8" ] ] }, { "id": "6fedd985.adf5d8", "type": "serial out", "z": "c6d2ee27.55704", "name": "Arduino_Out", "serial": "716fe4cb.9186dc", "x": 1080, "y": 120, "wires": [] }, { "id": "9107e091.2a6e2", "type": "serial in", "z": "c6d2ee27.55704", "name": "Arduino_In", "serial": "716fe4cb.9186dc", "x": 210, "y": 260, "wires": [ [ "e52bdb45.87f0b8" ] ] }, { "id": "e52bdb45.87f0b8", "type": "switch", "z": "c6d2ee27.55704", "name": "", "property": "payload", "propertyType": "msg", "rules": [ { "t": "cont", "v": "Überschuss?", "vt": "str" } ], "checkall": "true", "repair": false, "outputs": 1, "x": 390, "y": 260, "wires": [ [ "bbb81ca3.5894e" ] ] }, { "id": "bbb81ca3.5894e", "type": "change", "z": "c6d2ee27.55704", "name": "", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "Skalierung_0_9", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 590, "y": 260, "wires": [ [ "6fedd985.adf5d8", "8ce790ea.6727c" ] ] }, { "id": "53b296b4.80cd88", "type": "comment", "z": "c6d2ee27.55704", "name": "Regelung im Betrieb", "info": "", "x": 650, "y": 60, "wires": [] }, { "id": "28cdb90.f395f48", "type": "comment", "z": "c6d2ee27.55704", "name": "Start", "info": "", "x": 450, "y": 220, "wires": [] }, { "id": "2f9347d6.de35a8", "type": "debug", "z": "c6d2ee27.55704", "name": "mehr_weniger", "active": true, "tosidebar": true, "console": false, "tostatus": false, "complete": "payload", "targetType": "msg", "statusVal": "", "statusType": "auto", "x": 1100, "y": 60, "wires": [] }, { "id": "c65fbb60.39a348", "type": "range", "z": "c6d2ee27.55704", "minin": "0", "maxin": "9000", "minout": "0", "maxout": "9", "action": "scale", "round": true, "property": "payload", "name": "Skalierung_0_9", "x": 580, "y": 180, "wires": [ [ "5f2ee4d7.069abc" ] ] }, { "id": "5f2ee4d7.069abc", "type": "debug", "z": "c6d2ee27.55704", "name": "0_9kW", "active": true, "tosidebar": true, "console": false, "tostatus": false, "complete": "payload", "targetType": "msg", "statusVal": "", "statusType": "auto", "x": 740, "y": 180, "wires": [] }, { "id": "9ced4bd2.a3b8c8", "type": "debug", "z": "c6d2ee27.55704", "name": "5min_avg", "active": false, "tosidebar": true, "console": false, "tostatus": false, "complete": "payload", "targetType": "msg", "statusVal": "", "statusType": "auto", "x": 560, "y": 100, "wires": [] }, { "id": "c16f5107.58bef", "type": "inject", "z": "c6d2ee27.55704", "name": "", "props": [ { "p": "payload" } ], "repeat": "", "crontab": "", "once": false, "onceDelay": 0.1, "topic": "", "payload": "2100", "payloadType": "num", "x": 80, "y": 80, "wires": [ [ "9ced4bd2.a3b8c8", "5c8464ac.b4dc6c", "c65fbb60.39a348" ] ] }, { "id": "8ce790ea.6727c", "type": "debug", "z": "c6d2ee27.55704", "name": "", "active": true, "tosidebar": true, "console": false, "tostatus": false, "complete": "false", "statusVal": "", "statusType": "auto", "x": 900, "y": 240, "wires": [] }, { "id": "716fe4cb.9186dc", "type": "serial-port", "serialport": "/dev/ttyUSB0", "serialbaud": "9600", "databits": "8", "parity": "none", "stopbits": "1", "waitfor": "", "dtr": "none", "rts": "none", "cts": "none", "dsr": "none", "newline": "1", "bin": "false", "out": "time", "addchar": "", "responsetimeout": "10000" } ]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSupport us
621
Online32.8k
Users82.8k
Topics1.3m
Posts