node-red-contrib-amazon-echo Dimmen

quorle

Ich wollte meine KNX Leuchten über die node-red-contrib-amazon-echo Einschalten und Dimmen.
Jedoch klappt das ganze nicht so, wie es soll.
Ich kann zwar Leuchten nur ein/ausschalten, aber nicht dimmen.

Es soll bei der Ansage "Dimme Leuchte 1 " zum Beispiel, der Dimmwert übergeben werden und dann eingeschalten werden. Und beim Ausschalten soll, ausgeschaltet werden und dann der Dimmwert wieder auf 0 gesetzt werden. Zudem sollte mit einem Dimmwert von 0 auch ausgeschaltet werden.

Hat hier eventuell jemand eine Lösung?

So sieht der Flow aus:

[
    {
        "id": "793a823a.d4ec7c",
        "type": "switch",
        "z": "17c00ccb.376443",
        "name": "",
        "property": "payload",
        "propertyType": "msg",
        "rules": [
            {
                "t": "eq",
                "v": "on",
                "vt": "str"
            },
            {
                "t": "eq",
                "v": "off",
                "vt": "str"
            }
        ],
        "checkall": "true",
        "repair": false,
        "outputs": 2,
        "x": 630,
        "y": 280,
        "wires": [
            [
                "2a2bc042.ec27b"
            ],
            [
                "5df963ef.9513ec"
            ]
        ]
    },
    {
        "id": "c525be0a.069a",
        "type": "function",
        "z": "17c00ccb.376443",
        "name": "Funktion Dimmen",
        "func": "msg.payload = msg.payload.bri_normalized;\nreturn msg;",
        "outputs": 1,
        "noerr": 0,
        "initialize": "",
        "finalize": "",
        "x": 750,
        "y": 420,
        "wires": [
            [
                "50384801.c6aef8",
                "effcacb2.88097"
            ]
        ]
    },
    {
        "id": "6b1d4e8.c42ebb",
        "type": "ioBroker out",
        "z": "17c00ccb.376443",
        "name": "Beleuchtung Küche Esstisch schalten",
        "topic": "knx.0.Erdgeschoss_Beleuchtung.Küche.Beleuchtung_Küche_Esstisch_schalten",
        "ack": "false",
        "autoCreate": "false",
        "stateName": "",
        "role": "",
        "payloadType": "",
        "readonly": "",
        "stateUnit": "",
        "stateMin": "",
        "stateMax": "",
        "x": 1150,
        "y": 280,
        "wires": []
    },
    {
        "id": "effcacb2.88097",
        "type": "ioBroker out",
        "z": "17c00ccb.376443",
        "name": "Beleuchtung Küche Esstisch dimmen relativ",
        "topic": "knx.0.Erdgeschoss_Beleuchtung.Küche.Beleuchtung_Küche_Esstisch_dimmen_relativ",
        "ack": "false",
        "autoCreate": "false",
        "stateName": "",
        "role": "",
        "payloadType": "",
        "readonly": "",
        "stateUnit": "",
        "stateMin": "",
        "stateMax": "",
        "x": 1170,
        "y": 340,
        "wires": []
    },
    {
        "id": "ac5177e8.b4c3c8",
        "type": "amazon-echo-device",
        "z": "17c00ccb.376443",
        "name": "Tischlampe Kueche",
        "topic": "",
        "x": 410,
        "y": 300,
        "wires": [
            [
                "793a823a.d4ec7c",
                "e5924f13.bba9f",
                "c525be0a.069a"
            ]
        ],
        "icon": "node-red/light.svg"
    },
    {
        "id": "e5924f13.bba9f",
        "type": "debug",
        "z": "17c00ccb.376443",
        "name": "",
        "active": true,
        "tosidebar": true,
        "console": false,
        "tostatus": false,
        "complete": "payload",
        "targetType": "msg",
        "statusVal": "",
        "statusType": "auto",
        "x": 530,
        "y": 460,
        "wires": []
    },
    {
        "id": "50384801.c6aef8",
        "type": "debug",
        "z": "17c00ccb.376443",
        "name": "dimmen",
        "active": true,
        "tosidebar": true,
        "console": false,
        "tostatus": false,
        "complete": "payload",
        "targetType": "msg",
        "statusVal": "",
        "statusType": "auto",
        "x": 1140,
        "y": 460,
        "wires": []
    },
    {
        "id": "5df963ef.9513ec",
        "type": "function",
        "z": "17c00ccb.376443",
        "name": "Funktion AUS",
        "func": "msg.payload = 0;\nreturn msg;",
        "outputs": 1,
        "noerr": 0,
        "initialize": "",
        "finalize": "",
        "x": 800,
        "y": 320,
        "wires": [
            [
                "6b1d4e8.c42ebb"
            ]
        ]
    },
    {
        "id": "2a2bc042.ec27b",
        "type": "function",
        "z": "17c00ccb.376443",
        "name": "Funktion EIN",
        "func": "msg.payload = true;\nreturn msg;",
        "outputs": 1,
        "noerr": 0,
        "initialize": "",
        "finalize": "",
        "x": 790,
        "y": 260,
        "wires": [
            [
                "6b1d4e8.c42ebb"
            ]
        ]
    }
]

Hc-Yami

@quorle

[
    {
        "id": "818cc523.70a218",
        "type": "switch",
        "z": "9897550e.b3e51",
        "name": "msg.on",
        "property": "on",
        "propertyType": "msg",
        "rules": [
            {
                "t": "true"
            },
            {
                "t": "false"
            }
        ],
        "checkall": "true",
        "repair": false,
        "outputs": 2,
        "x": 680,
        "y": 320,
        "wires": [
            [
                "5bd767bb.40e59"
            ],
            [
                "88308fac.10f1e8"
            ]
        ]
    },
    {
        "id": "5bd767bb.40e59",
        "type": "change",
        "z": "9897550e.b3e51",
        "name": "true",
        "rules": [
            {
                "t": "set",
                "p": "payload",
                "pt": "msg",
                "to": "true",
                "tot": "bool"
            }
        ],
        "action": "",
        "property": "",
        "from": "",
        "to": "",
        "reg": false,
        "x": 830,
        "y": 300,
        "wires": [
            [
                "8ca29571.90098"
            ]
        ]
    },
    {
        "id": "88308fac.10f1e8",
        "type": "change",
        "z": "9897550e.b3e51",
        "name": "false",
        "rules": [
            {
                "t": "set",
                "p": "payload",
                "pt": "msg",
                "to": "false",
                "tot": "bool"
            }
        ],
        "action": "",
        "property": "",
        "from": "",
        "to": "",
        "reg": false,
        "x": 830,
        "y": 340,
        "wires": [
            [
                "8ca29571.90098"
            ]
        ]
    },
    {
        "id": "3eed8b30.6ddffc",
        "type": "amazon-echo-device",
        "z": "9897550e.b3e51",
        "name": "Licht im Arbeitszimmer",
        "topic": "",
        "x": 420,
        "y": 380,
        "wires": [
            [
                "818cc523.70a218",
                "480ca570.d789b4",
                "47933284.674bfc"
            ]
        ]
    },
    {
        "id": "de1cbbd9.e03ba",
        "type": "link in",
        "z": "9897550e.b3e51",
        "name": "",
        "links": [
            "ee8bef37.935848"
        ],
        "x": 275,
        "y": 380,
        "wires": [
            [
                "3eed8b30.6ddffc"
            ]
        ]
    },
    {
        "id": "480ca570.d789b4",
        "type": "change",
        "z": "9897550e.b3e51",
        "name": "msg.percentage",
        "rules": [
            {
                "t": "set",
                "p": "payload",
                "pt": "msg",
                "to": "percentage",
                "tot": "msg"
            }
        ],
        "action": "",
        "property": "",
        "from": "",
        "to": "",
        "reg": false,
        "x": 700,
        "y": 380,
        "wires": [
            [
                "aa073208.f337f8"
            ]
        ]
    }
]

quorle

@Hc-Yami

Danke dafür, was müsste nach dem msg.percentage angehängt werden?

Hc-Yami

@quorle das wurde irgendwie abgeschnitten. Hier jetzt das komplette.

[
    {
        "id": "50ca757a.f0189c",
        "type": "tab",
        "label": "Flow 2",
        "disabled": false,
        "info": ""
    },
    {
        "id": "4073d95d.6b27f",
        "type": "switch",
        "z": "50ca757a.f0189c",
        "name": "msg.on",
        "property": "on",
        "propertyType": "msg",
        "rules": [
            {
                "t": "true"
            },
            {
                "t": "false"
            }
        ],
        "checkall": "true",
        "repair": false,
        "outputs": 2,
        "x": 740,
        "y": 280,
        "wires": [
            [
                "29bc1d6f.4936a2"
            ],
            [
                "d7e707ee.644a48"
            ]
        ]
    },
    {
        "id": "29bc1d6f.4936a2",
        "type": "change",
        "z": "50ca757a.f0189c",
        "name": "true",
        "rules": [
            {
                "t": "set",
                "p": "payload",
                "pt": "msg",
                "to": "true",
                "tot": "bool"
            }
        ],
        "action": "",
        "property": "",
        "from": "",
        "to": "",
        "reg": false,
        "x": 890,
        "y": 260,
        "wires": [
            [
                "1a0443be.49b954"
            ]
        ]
    },
    {
        "id": "d7e707ee.644a48",
        "type": "change",
        "z": "50ca757a.f0189c",
        "name": "false",
        "rules": [
            {
                "t": "set",
                "p": "payload",
                "pt": "msg",
                "to": "false",
                "tot": "bool"
            }
        ],
        "action": "",
        "property": "",
        "from": "",
        "to": "",
        "reg": false,
        "x": 890,
        "y": 300,
        "wires": [
            [
                "1a0443be.49b954"
            ]
        ]
    },
    {
        "id": "67e388f8.9e106",
        "type": "amazon-echo-device",
        "z": "50ca757a.f0189c",
        "name": "Licht im Arbeitszimmer",
        "topic": "",
        "x": 480,
        "y": 340,
        "wires": [
            [
                "4073d95d.6b27f",
                "a2a7a519.e697d",
                "c1a4227.22574e"
            ]
        ]
    },
    {
        "id": "883011fe.b28878",
        "type": "link in",
        "z": "50ca757a.f0189c",
        "name": "",
        "links": [
            "ee8bef37.935848"
        ],
        "x": 335,
        "y": 340,
        "wires": [
            [
                "67e388f8.9e106"
            ]
        ]
    },
    {
        "id": "a2a7a519.e697d",
        "type": "change",
        "z": "50ca757a.f0189c",
        "name": "msg.percentage",
        "rules": [
            {
                "t": "set",
                "p": "payload",
                "pt": "msg",
                "to": "percentage",
                "tot": "msg"
            }
        ],
        "action": "",
        "property": "",
        "from": "",
        "to": "",
        "reg": false,
        "x": 760,
        "y": 340,
        "wires": [
            [
                "5751e74.59a9f98"
            ]
        ]
    },
    {
        "id": "1a0443be.49b954",
        "type": "ioBroker out",
        "z": "50ca757a.f0189c",
        "name": "Arbeitszimmer_Licht",
        "topic": "zigbee.0.14b457fffe40f0da.state",
        "ack": "false",
        "autoCreate": "false",
        "x": 1100,
        "y": 280,
        "wires": []
    },
    {
        "id": "5751e74.59a9f98",
        "type": "ioBroker out",
        "z": "50ca757a.f0189c",
        "name": "Arbeitszimmer.bri",
        "topic": "zigbee.0.14b457fffe40f0da.brightness",
        "ack": "false",
        "autoCreate": "false",
        "x": 1090,
        "y": 340,
        "wires": []
    },
    {
        "id": "c1a4227.22574e",
        "type": "change",
        "z": "50ca757a.f0189c",
        "name": "msg.rgb",
        "rules": [
            {
                "t": "set",
                "p": "payload",
                "pt": "msg",
                "to": "rgb",
                "tot": "msg"
            }
        ],
        "action": "",
        "property": "",
        "from": "",
        "to": "",
        "reg": false,
        "x": 740,
        "y": 400,
        "wires": [
            [
                "cd161b48.46ae2"
            ]
        ]
    },
    {
        "id": "cd161b48.46ae2",
        "type": "ioBroker out",
        "z": "50ca757a.f0189c",
        "name": "Arbeitszimmer.colortemp",
        "topic": "zigbee.0.14b457fffe40f0da.colortemp",
        "ack": "false",
        "autoCreate": "false",
        "x": 1110,
        "y": 400,
        "wires": []
    }
]

Die Prüfung beim msg_on ist auch irgendwie schwachsinnig. Liegt halt daran, dass man bei manchen Geräten unterschiedliche Outputs für off und on hat. Hie rkönntest du das aber demnach einfach durchreichen.

vepman

@Hc-Yami
Hättest du vielleicht eine Lösung für eine Kommazahl?
Ich würde gerne einem Thermostat z. B. 21,5 Grad sagen, kriege aber nur 21 Grad hin.
Hier mal mein Flow dazu:

[
    {
        "id": "dd38aaa4.70c92",
        "type": "ioBroker out",
        "z": "f5398f06.034ec8",
        "name": "Wz_Thermostat:2.SET_TEMPERATURE",
        "topic": "hm-rpc.0.QEQ12345678.2.SET_TEMPERATURE",
        "ack": "false",
        "autoCreate": "false",
        "stateName": "",
        "role": "",
        "stateUnit": "",
        "stateMin": "",
        "stateMax": "",
        "x": 860,
        "y": 120,
        "wires": []
    },
    {
        "id": "31159ce5.476aa4",
        "type": "change",
        "z": "f5398f06.034ec8",
        "name": "msg.percentage",
        "rules": [
            {
                "t": "set",
                "p": "payload",
                "pt": "msg",
                "to": "percentage",
                "tot": "msg"
            }
        ],
        "action": "",
        "property": "",
        "from": "",
        "to": "",
        "reg": false,
        "x": 520,
        "y": 120,
        "wires": [
            [
                "dd38aaa4.70c92"
            ]
        ]
    },
    {
        "id": "f7c6ccbf.e6dee8",
        "type": "amazon-echo-device",
        "z": "f5398f06.034ec8",
        "name": "Thermostat",
        "topic": "",
        "x": 310,
        "y": 120,
        "wires": [
            [
                "31159ce5.476aa4"
            ]
        ]
    }
]

Hc-Yami

@vepman du könntest nur 21°C sagen und den Wert auf 21,5°C ändern lassen.
Amazon lässt nicht zu "Glühbirnen" 21,5% Helligkeit anzusteuern. :/

vepman

@Hc-Yami
Habe ich mir fast schon gedacht.
Danke für deine Hilfe. :+1:

Community Forum

NEWS

node-red-contrib-amazon-echo Dimmen

Support us

530

32.5k

81.7k

1.3m