NEWS
Z-WAVE Devolo Raumthermostat & Heizkörperthermostat verknüp
Hardware
6
Beiträge
3
Kommentatoren
349
Aufrufe
1
Watching
-
Hallo zusammen,
Ich habe mir für meinen Raum 1x Devolo Raumthermostat sowie 2x Heizkörperthermostat gekauft.
Beide Geräte habe ich problemlos in den IObroker bekommen ( zwave control openzwave) in der Version 1.7.3
Jetzt möchte ich die beiden Geräte natürlich untereinander verknüpfen so das ich am Raumthermostat die Temperatur einstellen kann.
Leider ist es mir nicht möglich im IOBroker dieses zu tun, da ich beim verknüpfen keine Gruppe zur Auswahl habe. Bilder Siehe unten.Anleitung:
RaumthermostatHeizkörperthermostat
Raumthermostat
Verknüpfung
LOG
zwave.0 2020-02-13 21:06:14.309 info (17244) node ready nodeID: 9, nodeInfo: {"manufacturer":"Danfoss","manufacturerid":"0x0002","product":"RS Room Sensor","producttype":"0x0003","productid":"0x8010","type":"Routing Multilevel Sensor"," zwave.0 2020-02-13 21:06:09.494 info (17244) Requesting all association groups from node 9 zwave.0 2020-02-13 21:05:26.623 info (17244) Requesting all association groups from node 11 zwave.0 2020-02-13 21:05:02.629 info (17244) Requesting all association groups from node 9 zwave.0 2020-02-13 21:04:58.172 info (17244) List of ports: [{"comName":"/dev/ttyACM0"},{"comName":"/dev/ttyACM1"},{"comName":"/dev/ttyAMA0"}] zwave.0 2020-02-13 20:57:02.453 info (17244) List of ports: [{"comName":"/dev/ttyACM0"},{"comName":"/dev/ttyACM1"},{"comName":"/dev/ttyAMA0"}] zwave.0 2020-02-13 20:45:29.597 info (17244) node ready nodeID: 9, nodeInfo: {"manufacturer":"Danfoss","manufacturerid":"0x0002","product":"RS Room Sensor","producttype":"0x0003","productid":"0x8010","type":"Routing Multilevel Sensor"," zwave.0 2020-02-13 20:45:06.716 info (17244) Requesting all association groups from node 11 zwave.0 2020-02-13 20:44:58.738 info (17244) disabled exclusion mode zwave.0 2020-02-13 20:44:40.919 info (17244) node ready nodeID: 9, nodeInfo: {"manufacturer":"Danfoss","manufacturerid":"0x0002","product":"RS Room Sensor","producttype":"0x0003","productid":"0x8010","type":"Routing Multilevel Sensor"," zwave.0 2020-02-13 20:44:02.543 info (17244) controller command feedback for node 0: state: "The command has failed", error: "No error", helpmsg: "RemoveDevice ControllerCommand - Failed" zwave.0 2020-02-13 20:44:02.411 info (17244) controller command feedback for node 0: state: "The controller is communicating with the other device to carry out the command", error: "No error", helpmsg: "RemoveDevice ControllerCommand - zwave.0 2020-02-13 20:43:58.766 info (17244) controller command feedback for node 0: state: "Controller is waiting for a user action (60s)", error: "No error", helpmsg: "RemoveDevice ControllerCommand - Waiting" zwave.0 2020-02-13 20:43:58.749 info (17244) controller command feedback for node 0: state: "The command is starting", error: "No error", helpmsg: "RemoveDevice ControllerCommand - Starting" zwave.0 2020-02-13 20:43:58.733 info (17244) Execute removeNode zwave.0 2020-02-13 20:43:25.346 info (17244) node ready nodeID: 11, nodeInfo: {"manufacturer":"Danfoss","manufacturerid":"0x0002","product":"Devolo Home Control Radiator Thermostat","producttype":"0x0005","productid":"0x0175","type":"Se zwave.0 2020-02-13 20:43:25.342 info (17244) State created: zwave.0.NODE11.CLOCK.Minute_1 = undefined, index = 2, comClass = 129, instance = 1 zwave.0 2020-02-13 20:43:25.321 info (17244) Channel created: zwave.0.NODE11.CLOCK = 47, index = 2, comClass = 129, instance = 1 zwave.0 2020-02-13 20:43:25.316 info (17244) State created: zwave.0.NODE11.CLOCK.Hour_1 = undefined, index = 1, comClass = 129, instance = 1 zwave.0 2020-02-13 20:43:25.292 info (17244) Channel created: zwave.0.NODE11.CLOCK = 0, index = 1, comClass = 129, instance = 1 zwave.0 2020-02-13 20:43:25.284 info (17244) State created: zwave.0.NODE11.SENSOR_MULTILEVEL.Air_Temperature_1 = undefined, index = 1, comClass = 49, instance = 1 zwave.0 2020-02-13 20:43:25.261 info (17244) Channel created: zwave.0.NODE11.SENSOR_MULTILEVEL = 29.57, index = 1, comClass = 49, instance = 1 zwave.0 2020-02-13 20:43:25.168 info (17244) State created: zwave.0.NODE11.PROTECTION.Protection = undefined, index = 0, comClass = 117, instance = 1 zwave.0 2020-02-13 20:43:25.165 info (17244) Channel created: zwave.0.NODE11.PROTECTION = Unprotected, index = 0, comClass = 117, instance = 1 zwave.0 2020-02-13 20:43:25.149 info (17244) State created: zwave.0.NODE11.CLIMATE_CONTROL_SCHEDULE.Override_Setback_1 = undefined, index = 9, comClass = 70, instance = 1 zwave.0 2020-02-13 20:43:25.133 info (17244) State created: zwave.0.NODE11.CLIMATE_CONTROL_SCHEDULE.Override_State_1 = undefined, index = 8, comClass = 70, instance = 1 zwave.0 2020-02-13 20:43:25.128 info (17244) State created: zwave.0.NODE11.THERMOSTAT_SETPOINT.Heating_1_1 = undefined, index = 1, comClass = 67, instance = 1 zwave.0 2020-02-13 20:43:25.124 info (17244) Channel created: zwave.0.NODE11.THERMOSTAT_SETPOINT = 4.00, index = 1, comClass = 67, instance = 1 zwave.0 2020-02-13 20:43:24.472 info (17244) State created: zwave.0.NODE11.VERSION.Application_Version = undefined, index = 2, comClass = 134, instance = 1 zwave.0 2020-02-13 20:43:24.468 info (17244) Channel created: zwave.0.NODE11.VERSION = 1.00, index = 2, comClass = 134, instance = 1 zwave.0 2020-02-13 20:43:24.456 info (17244) State created: zwave.0.NODE11.VERSION.Protocol_Version = undefined, index = 1, comClass = 134, instance = 1 zwave.0 2020-02-13 20:43:24.453 info (17244) Channel created: zwave.0.NODE11.VERSION = 3.67, index = 1, comClass = 134, instance = 1 zwave.0 2020-02-13 20:43:24.445 info (17244) State created: zwave.0.NODE11.VERSION.Library_Version = undefined, index = 0, comClass = 134, instance = 1 zwave.0 2020-02-13 20:43:24.427 info (17244) Channel created: zwave.0.NODE11.VERSION = 6, index = 0, comClass = 134, instance = 1 zwave.0 2020-02-13 20:43:24.415 info (17244) State created: zwave.0.NODE11.WAKE_UP.Wake-up_Interval_Step = undefined, index = 4, comClass = 132, instance = 1 zwave.0 2020-02-13 20:43:24.401 info (17244) Channel created: zwave.0.NODE11.WAKE_UP = 60, index = 4, comClass = 132, instance = 1 zwave.0 2020-02-13 20:43:24.388 info (17244) State created: zwave.0.NODE11.WAKE_UP.Default_Wake-up_Interval = undefined, index = 3, comClass = 132, instance = 1 zwave.0 2020-02-13 20:43:24.385 info (17244) Channel created: zwave.0.NODE11.WAKE_UP = 300, index = 3, comClass = 132, instance = 1 zwave.0 2020-02-13 20:43:24.370 info (17244) State created: zwave.0.NODE11.WAKE_UP.Maximum_Wake-up_Interval = undefined, index = 2, comClass = 132, instance = 1 zwave.0 2020-02-13 20:43:24.364 info (17244) Channel created: zwave.0.NODE11.WAKE_UP = 1800, index = 2, comClass = 132, instance = 1 zwave.0 2020-02-13 20:43:24.249 info (17244) State created: zwave.0.NODE11.WAKE_UP.Minimum_Wake-up_Interval = undefined, index = 1, comClass = 132, instance = 1 zwave.0 2020-02-13 20:43:24.244 info (17244) Channel created: zwave.0.NODE11.WAKE_UP = 60, index = 1, comClass = 132, instance = 1 zwave.0 2020-02-13 20:43:24.239 info (17244) State created: zwave.0.NODE11.THERMOSTAT_SETPOINT.Heating_1_1 = undefined, index = 1, comClass = 67, instance = 1 zwave.0 2020-02-13 20:43:24.236 info (17244) Channel created: zwave.0.NODE11.THERMOSTAT_SETPOINT = 4.00, index = 1, comClass = 67, instance = 1 zwave.0 2020-02-13 20:43:24.230 info (17244) State created: zwave.0.NODE11.SENSOR_MULTILEVEL.Air_Temperature_Units = undefined, index = 256, comClass = 49, instance = 1 zwave.0 2020-02-13 20:43:24.225 info (17244) Channel created: zwave.0.NODE11.SENSOR_MULTILEVEL = , index = 256, comClass = 49, instance = 1 zwave.0 2020-02-13 20:43:24.215 info (17244) State created: zwave.0.NODE11.SENSOR_MULTILEVEL.Air_Temperature_1 = undefined, index = 1, comClass = 49, instance = 1 zwave.0 2020-02-13 20:43:24.211 info (17244) Channel created: zwave.0.NODE11.SENSOR_MULTILEVEL = 0.0, index = 1, comClass = 49, instance = 1 zwave.0 2020-02-13 20:43:24.198 info (17244) Create new device: zwave.0.NODE11[Danfoss Devolo Home Control Radiator Thermostat] zwave.0 2020-02-13 20:43:24.193 info (17244) State created: zwave.0.NODE11.WAKE_UP.Wake-up_Interval_Step = undefined, index = 4, comClass = 132, instance = 1 zwave.0 2020-02-13 20:43:24.187 info (17244) Channel created: zwave.0.NODE11.WAKE_UP = 60, index = 4, comClass = 132, instance = 1 zwave.0 2020-02-13 20:43:24.182 info (17244) State created: zwave.0.NODE11.WAKE_UP.Default_Wake-up_Interval = undefined, index = 3, comClass = 132, instance = 1 zwave.0 2020-02-13 20:43:24.173 info (17244) Channel created: zwave.0.NODE11.WAKE_UP = 300, index = 3, comClass = 132, instance = 1 zwave.0 2020-02-13 20:43:24.168 info (17244) State created: zwave.0.NODE11.WAKE_UP.Maximum_Wake-up_Interval = undefined, index = 2, comClass = 132, instance = 1 zwave.0 2020-02-13 20:43:24.163 info (17244) Channel created: zwave.0.NODE11.WAKE_UP = 1800, index = 2, comClass = 132, instance = 1 zwave.0 2020-02-13 20:43:24.157 info (17244) State created: zwave.0.NODE11.WAKE_UP.Minimum_Wake-up_Interval = undefined, index = 1, comClass = 132, instance = 1 zwave.0 2020-02-13 20:43:24.154 info (17244) Channel created: zwave.0.NODE11.WAKE_UP = 60, index = 1, comClass = 132, instance = 1 zwave.0 2020-02-13 20:43:23.970 info (17244) State created: zwave.0.NODE11.PROTECTION.Protection = undefined, index = 0, comClass = 117, instance = 1 zwave.0 2020-02-13 20:43:23.964 info (17244) Channel created: zwave.0.NODE11.PROTECTION = Unprotected, index = 0, comClass = 117, instance = 1 zwave.0 2020-02-13 20:43:23.959 info (17244) State created: zwave.0.NODE11.CLOCK.Minute_1 = undefined, index = 2, comClass = 129, instance = 1 zwave.0 2020-02-13 20:43:23.956 info (17244) Channel created: zwave.0.NODE11.CLOCK = 0, index = 2, comClass = 129, instance = 1 zwave.0 2020-02-13 20:43:23.951 info (17244) State created: zwave.0.NODE11.CLOCK.Hour_1 = undefined, index = 1, comClass = 129, instance = 1 zwave.0 2020-02-13 20:43:23.946 info (17244) Channel created: zwave.0.NODE11.CLOCK = 12, index = 1, comClass = 129, instance = 1 zwave.0 2020-02-13 20:43:23.936 info (17244) State created: zwave.0.NODE11.CLOCK.Day_1 = undefined, index = 0, comClass = 129, instance = 1 zwave.0 2020-02-13 20:43:23.932 info (17244) Channel created: zwave.0.NODE11.CLOCK = Monday, index = 0, comClass = 129, instance = 1 zwave.0 2020-02-13 20:43:23.925 info (17244) State created: zwave.0.NODE11.CLIMATE_CONTROL_SCHEDULE.Override_Setback_1 = undefined, index = 9, comClass = 70, instance = 1 zwave.0 2020-02-13 20:43:23.921 info (17244) Channel created: zwave.0.NODE11.CLIMATE_CONTROL_SCHEDULE = 0, index = 9, comClass = 70, instance = 1 zwave.0 2020-02-13 20:43:23.915 info (17244) State created: zwave.0.NODE11.CLIMATE_CONTROL_SCHEDULE.Override_State_1 = undefined, index = 8, comClass = 70, instance = 1 zwave.0 2020-02-13 20:43:23.911 info (17244) Channel created: zwave.0.NODE11.CLIMATE_CONTROL_SCHEDULE = None, index = 8, comClass = 70, instance = 1 zwave.0 2020-02-13 20:43:23.904 info (17244) State created: zwave.0.NODE11.CLIMATE_CONTROL_SCHEDULE.Sunday_1 = undefined, index = 7, comClass = 70, instance = 1 zwave.0 2020-02-13 20:43:23.892 info (17244) Channel created: zwave.0.NODE11.CLIMATE_CONTROL_SCHEDULE = undefined, index = 7, comClass = 70, instance = 1 zwave.0 2020-02-13 20:43:23.887 info (17244) State created: zwave.0.NODE11.CLIMATE_CONTROL_SCHEDULE.Saturday_1 = undefined, index = 6, comClass = 70, instance = 1 zwave.0 2020-02-13 20:43:23.881 info (17244) Channel created: zwave.0.NODE11.CLIMATE_CONTROL_SCHEDULE = undefined, index = 6, comClass = 70, instance = 1 zwave.0 2020-02-13 20:43:23.874 info (17244) State created: zwave.0.NODE11.CLIMATE_CONTROL_SCHEDULE.Friday_1 = undefined, index = 5, comClass = 70, instance = 1 zwave.0 2020-02-13 20:43:23.871 info (17244) Channel created: zwave.0.NODE11.CLIMATE_CONTROL_SCHEDULE = undefined, index = 5, comClass = 70, instance = 1 zwave.0 2020-02-13 20:43:23.864 info (17244) State created: zwave.0.NODE11.CLIMATE_CONTROL_SCHEDULE.Thursday_1 = undefined, index = 4, comClass = 70, instance = 1 zwave.0 2020-02-13 20:43:23.861 info (17244) Channel created: zwave.0.NODE11.CLIMATE_CONTROL_SCHEDULE = undefined, index = 4, comClass = 70, instance = 1 zwave.0 2020-02-13 20:43:23.852 info (17244) State created: zwave.0.NODE11.CLIMATE_CONTROL_SCHEDULE.Wednesday_1 = undefined, index = 3, comClass = 70, instance = 1 zwave.0 2020-02-13 20:43:23.848 info (17244) Channel created: zwave.0.NODE11.CLIMATE_CONTROL_SCHEDULE = undefined, index = 3, comClass = 70, instance = 1 zwave.0 2020-02-13 20:43:23.841 info (17244) State created: zwave.0.NODE11.CLIMATE_CONTROL_SCHEDULE.Tuesday_1 = undefined, index = 2, comClass = 70, instance = 1 zwave.0 2020-02-13 20:43:23.838 info (17244) Channel created: zwave.0.NODE11.CLIMATE_CONTROL_SCHEDULE = undefined, index = 2, comClass = 70, instance = 1 zwave.0 2020-02-13 20:43:23.832 info (17244) State created: zwave.0.NODE11.CLIMATE_CONTROL_SCHEDULE.Monday_1 = undefined, index = 1, comClass = 70, instance = 1 zwave.0 2020-02-13 20:43:23.821 info (17244) Channel created: zwave.0.NODE11.CLIMATE_CONTROL_SCHEDULE = undefined, index = 1, comClass = 70, instance = 1 zwave.0 2020-02-13 20:43:23.808 info (17244) State created: zwave.0.NODE11.BATTERY.Battery_Level_1 = undefined, index = 0, comClass = 128, instance = 1 zwave.0 2020-02-13 20:43:23.800 info (17244) Channel created: zwave.0.NODE11.BATTERY = 100, index = 0, comClass = 128, instance = 1 zwave.0 2020-02-13 20:43:23.711 info (17244) State created: zwave.0.NODE11.MANUFACTURER_SPECIFIC.Latest_Available_Config_File_Revision = undefined, index = 2, comClass = 114, instance = 1 zwave.0 2020-02-13 20:43:23.708 info (17244) Channel created: zwave.0.NODE11.MANUFACTURER_SPECIFIC = 10, index = 2, comClass = 114, instance = 1 zwave.0 2020-02-13 20:43:23.688 info (17244) Create new device: zwave.0.NODE11[Danfoss Devolo Home Control Radiator Thermostat] zwave.0 2020-02-13 20:43:23.683 info (17244) State created: zwave.0.NODE11.MANUFACTURER_SPECIFIC.Loaded_Config_Revision = undefined, index = 0, comClass = 114, instance = 1 zwave.0 2020-02-13 20:43:23.679 info (17244) Channel created: zwave.0.NODE11.MANUFACTURER_SPECIFIC = 10, index = 0, comClass = 114, instance = 1 zwave.0 2020-02-13 20:43:23.674 info (17244) State created: zwave.0.NODE11.MANUFACTURER_SPECIFIC.Config_File_Revision = undefined, index = 1, comClass = 114, instance = 1 zwave.0 2020-02-13 20:43:23.671 info (17244) Channel created: zwave.0.NODE11.MANUFACTURER_SPECIFIC = 10, index = 1, comClass = 114, instance = 1 zwave.0 2020-02-13 20:43:23.643 info (17244) State created: zwave.0.NODE11.MANUFACTURER_SPECIFIC.Serial_Number = undefined, index = 4, comClass = 114, instance = 1 zwave.0 2020-02-13 20:43:23.639 info (17244) Channel created: zwave.0.NODE11.MANUFACTURER_SPECIFIC = , index = 4, comClass = 114, instance = 1 zwave.0 2020-02-13 20:43:23.634 info (17244) State created: zwave.0.NODE11.MANUFACTURER_SPECIFIC.Device_ID = undefined, index = 3, comClass = 114, instance = 1 zwave.0 2020-02-13 20:43:23.625 info (17244) Channel created: zwave.0.NODE11.MANUFACTURER_SPECIFIC = , index = 3, comClass = 114, instance = 1 zwave.0 2020-02-13 20:43:23.620 info (17244) State created: zwave.0.NODE11.MANUFACTURER_SPECIFIC.Latest_Available_Config_File_Revision = undefined, index = 2, comClass = 114, instance = 1 zwave.0 2020-02-13 20:43:23.615 info (17244) Channel created: zwave.0.NODE11.MANUFACTURER_SPECIFIC = 0, index = 2, comClass = 114, instance = 1 zwave.0 2020-02-13 20:43:23.610 info (17244) State created: zwave.0.NODE11.MANUFACTURER_SPECIFIC.Config_File_Revision = undefined, index = 1, comClass = 114, instance = 1 zwave.0 2020-02-13 20:43:23.607 info (17244) Channel created: zwave.0.NODE11.MANUFACTURER_SPECIFIC = 0, index = 1, comClass = 114, instance = 1 zwave.0 2020-02-13 20:43:23.602 info (17244) State created: zwave.0.NODE11.MANUFACTURER_SPECIFIC.Loaded_Config_Revision = undefined, index = 0, comClass = 114, instance = 1 zwave.0 2020-02-13 20:43:23.597 info (17244) Channel created: zwave.0.NODE11.MANUFACTURER_SPECIFIC = 0, index = 0, comClass = 114, instance = 1 zwave.0 2020-02-13 20:43:23.586 info (17244) State created: zwave.0.NODE11.WAKE_UP.Wake-up_Interval = undefined, index = 0, comClass = 132, instance = 1 zwave.0 2020-02-13 20:43:23.575 info (17244) Channel created: zwave.0.NODE11.WAKE_UP = 300, index = 0, comClass = 132, instance = 1 zwave.0 2020-02-13 20:43:16.997 info (17244) controller command feedback for node 255: state: "The command was cancelled", error: "No error", helpmsg: "RemoveDevice ControllerCommand - Canceled" zwave.0 2020-02-13 20:43:16.979 info (17244) disabled exclusion mode zwave.0 2020-02-13 20:42:17.031 info (17244) controller command feedback for node 0: state: "Controller is waiting for a user action (60s)", error: "No error", helpmsg: "RemoveDevice ControllerCommand - Waiting" zwave.0 2020-02-13 20:42:17.011 info (17244) controller command feedback for node 0: state: "The command is starting", error: "No error", helpmsg: "RemoveDevice ControllerCommand - Starting" zwave.0 2020-02-13 20:42:16.973 info (17244) Execute removeNode zwave.0 2020-02-13 20:42:16.257 info (17244) node ready nodeID: 9, nodeInfo: {"manufacturer":"Danfoss","manufacturerid":"0x0002","product":"RS Room Sensor","producttype":"0x0003","productid":"0x8010","type":"Routing Multilevel Sensor"," zwave.0 2020-02-13 20:42:01.407 info (17244) disabled exclusion mode zwave.0 2020-02-13 20:41:49.555 info (17244) node ready nodeID: 9, nodeInfo: {"manufacturer":"Danfoss","manufacturerid":"0x0002","product":"RS Room Sensor","producttype":"0x0003","productid":"0x8010","type":"Routing Multilevel Sensor"," zwave.0 2020-02-13 20:41:25.259 info (17244) node ready nodeID: 9, nodeInfo: {"manufacturer":"Danfoss","manufacturerid":"0x0002","product":"RS Room Sensor","producttype":"0x0003","productid":"0x8010","type":"Routing Multilevel Sensor"," zwave.0 2020-02-13 20:41:24.830 info (17244) node ready nodeID: 9, nodeInfo: {"manufacturer":"Danfoss","manufacturerid":"0x0002","product":"RS Room Sensor","producttype":"0x0003","productid":"0x8010","type":"Routing Multilevel Sensor"," zwave.0 2020-02-13 20:41:19.995 info (17244) node ready nodeID: 9, nodeInfo: {"manufacturer":"Danfoss","manufacturerid":"0x0002","product":"RS Room Sensor","producttype":"0x0003","productid":"0x8010","type":"Routing Multilevel Sensor"," zwave.0 2020-02-13 20:41:05.798 info (17244) controller command feedback for node 0: state: "The command has failed", error: "No error", helpmsg: "RemoveDevice ControllerCommand - Failed" zwave.0 2020-02-13 20:41:05.515 info (17244) controller command feedback for node 0: state: "The controller is communicating with the other device to carry out the command", error: "No error", helpmsg: "RemoveDevice ControllerCommand - zwave.0 2020-02-13 20:41:01.433 info (17244) controller command feedback for node 0: state: "Controller is waiting for a user action (60s)", error: "No error", helpmsg: "RemoveDevice ControllerCommand - Waiting" zwave.0 2020-02-13 20:41:01.417 info (17244) controller command feedback for node 0: state: "The command is starting", error: "No error", helpmsg: "RemoveDevice ControllerCommand - Starting" zwave.0 2020-02-13 20:41:01.400 info (17244) Execute removeNode zwave.0 2020-02-13 20:40:11.913 info (17244) node ready nodeID: 9, nodeInfo: {"manufacturer":"Danfoss","manufacturerid":"0x0002","product":"RS Room Sensor","producttype":"0x0003","productid":"0x8010","type":"Routing Multilevel Sensor"," zwave.0 2020-02-13 20:39:52.666 info (17244) List of ports: [{"comName":"/dev/ttyACM0"},{"comName":"/dev/ttyACM1"},{"comName":"/dev/ttyAMA0"}] zwave.0 2020-02-13 20:39:51.329 info (17244) State created: zwave.0.NODE9.THERMOSTAT_SETPOINT.Cooling_1_1 = undefined, index = 2, comClass = 67, instance = 1 zwave.0 2020-02-13 20:39:51.247 info (17244) State created: zwave.0.NODE9.THERMOSTAT_SETPOINT.Heating_1_1 = undefined, index = 1, comClass = 67, instance = 1 zwave.0 2020-02-13 20:39:38.320 info (17244) List of ports: [{"comName":"/dev/ttyACM0"},{"comName":"/dev/ttyACM1"},{"comName":"/dev/ttyAMA0"}] zwave.0 2020-02-13 20:39:20.758 info (17244) State created: zwave.0.NODE9.CENTRAL_SCENE.Scene_1_1 = undefined, index = 1, comClass = 91, instance = 1 zwave.0 2020-02-13 20:39:20.714 info (17244) State created: zwave.0.NODE9.THERMOSTAT_SETPOINT.Unused_6_1 = undefined, index = 6, comClass = 67, instance = 1 zwave.0 2020-02-13 20:39:20.552 info (17244) State created: zwave.0.NODE9.SENSOR_MULTILEVEL.Air_Temperature_Units = undefined, index = 256, comClass = 49, instance = 1 zwave.0 2020-02-13 20:39:20.540 info (17244) Create new device: zwave.0.NODE9[Danfoss RS Room Sensor] zwave.0 2020-02-13 20:39:20.535 info (17244) State created: zwave.0.NODE9.WAKE_UP.Wake-up_Interval_Step = undefined, index = 4, comClass = 132, instance = 1 zwave.0 2020-02-13 20:39:20.532 info (17244) Channel created: zwave.0.NODE9.WAKE_UP = 0, index = 4, comClass = 132, instance = 1 zwave.0 2020-02-13 20:39:20.527 info (17244) State created: zwave.0.NODE9.WAKE_UP.Default_Wake-up_Interval = undefined, index = 3, comClass = 132, instance = 1 zwave.0 2020-02-13 20:39:20.523 info (17244) Channel created: zwave.0.NODE9.WAKE_UP = 0, index = 3, comClass = 132, instance = 1 zwave.0 2020-02-13 20:39:20.518 info (17244) State created: zwave.0.NODE9.WAKE_UP.Maximum_Wake-up_Interval = undefined, index = 2, comClass = 132, instance = 1 zwave.0 2020-02-13 20:39:20.515 info (17244) Channel created: zwave.0.NODE9.WAKE_UP = 0, index = 2, comClass = 132, instance = 1 zwave.0 2020-02-13 20:39:20.510 info (17244) State created: zwave.0.NODE9.WAKE_UP.Minimum_Wake-up_Interval = undefined, index = 1, comClass = 132, instance = 1 zwave.0 2020-02-13 20:39:20.506 info (17244) Channel created: zwave.0.NODE9.WAKE_UP = 0, index = 1, comClass = 132, instance = 1 zwave.0 2020-02-13 20:39:20.359 info (17244) State created: zwave.0.NODE9.MANUFACTURER_SPECIFIC.Latest_Available_Config_File_Revision = undefined, index = 2, comClass = 114, instance = 1 zwave.0 2020-02-13 20:39:20.356 info (17244) Channel created: zwave.0.NODE9.MANUFACTURER_SPECIFIC = 9, index = 2, comClass = 114, instance = 1 zwave.0 2020-02-13 20:39:20.343 info (17244) Create new device: zwave.0.NODE9[Danfoss RS Room Sensor] zwave.0 2020-02-13 20:39:20.337 info (17244) State created: zwave.0.NODE9.CONFIGURATION.Led_Color = undefined, index = 11, comClass = 112, instance = 1 zwave.0 2020-02-13 20:39:20.334 info (17244) Channel created: zwave.0.NODE9.CONFIGURATION = Green, index = 11, comClass = 112, instance = 1 zwave.0 2020-02-13 20:39:20.327 info (17244) State created: zwave.0.NODE9.CONFIGURATION.Number_of_flash = undefined, index = 10, comClass = 112, instance = 1 zwave.0 2020-02-13 20:39:20.323 info (17244) Channel created: zwave.0.NODE9.CONFIGURATION = 5, index = 10, comClass = 112, instance = 1 zwave.0 2020-02-13 20:39:20.317 info (17244) State created: zwave.0.NODE9.CONFIGURATION.Led_Flash_Period = undefined, index = 5, comClass = 112, instance = 1 zwave.0 2020-02-13 20:39:20.314 info (17244) Channel created: zwave.0.NODE9.CONFIGURATION = 1, index = 5, comClass = 112, instance = 1 zwave.0 2020-02-13 20:39:20.299 info (17244) State created: zwave.0.NODE9.CONFIGURATION.Led_on_time = undefined, index = 9, comClass = 112, instance = 1 zwave.0 2020-02-13 20:39:20.296 info (17244) Channel created: zwave.0.NODE9.CONFIGURATION = 1, index = 9, comClass = 112, instance = 1 zwave.0 2020-02-13 20:39:20.291 info (17244) State created: zwave.0.NODE9.CONFIGURATION.Setpoint_type = undefined, index = 8, comClass = 112, instance = 1 zwave.0 2020-02-13 20:39:20.285 info (17244) Channel created: zwave.0.NODE9.CONFIGURATION = Heating, index = 8, comClass = 112, instance = 1 zwave.0 2020-02-13 20:39:20.280 info (17244) State created: zwave.0.NODE9.CONFIGURATION.Temporarily_override_scheduler = undefined, index = 7, comClass = 112, instance = 1 zwave.0 2020-02-13 20:39:20.277 info (17244) Channel created: zwave.0.NODE9.CONFIGURATION = Enabled, index = 7, comClass = 112, instance = 1 zwave.0 2020-02-13 20:39:20.271 info (17244) State created: zwave.0.NODE9.CONFIGURATION.Setpoint_control_function = undefined, index = 6, comClass = 112, instance = 1 zwave.0 2020-02-13 20:39:20.266 info (17244) Channel created: zwave.0.NODE9.CONFIGURATION = Enabled, index = 6, comClass = 112, instance = 1 zwave.0 2020-02-13 20:39:20.256 info (17244) State created: zwave.0.NODE9.CONFIGURATION.Max/Override_Setpoint = undefined, index = 4, comClass = 112, instance = 1 zwave.0 2020-02-13 20:39:20.252 info (17244) Channel created: zwave.0.NODE9.CONFIGURATION = 28, index = 4, comClass = 112, instance = 1 zwave.0 2020-02-13 20:39:20.247 info (17244) State created: zwave.0.NODE9.CONFIGURATION.Min/Override_Setpoint = undefined, index = 3, comClass = 112, instance = 1 zwave.0 2020-02-13 20:39:20.244 info (17244) Channel created: zwave.0.NODE9.CONFIGURATION = 12, index = 3, comClass = 112, instance = 1 zwave.0 2020-02-13 20:39:20.237 info (17244) State created: zwave.0.NODE9.CONFIGURATION.Setpoint_resolution = undefined, index = 2, comClass = 112, instance = 1 zwave.0 2020-02-13 20:39:20.233 info (17244) Channel created: zwave.0.NODE9.CONFIGURATION = 5, index = 2, comClass = 112, instance = 1 zwave.0 2020-02-13 20:39:20.228 info (17244) State created: zwave.0.NODE9.CONFIGURATION.Temperature_Threshold = undefined, index = 1, comClass = 112, instance = 1 zwave.0 2020-02-13 20:39:20.223 info (17244) Channel created: zwave.0.NODE9.CONFIGURATION = 5, index = 1, comClass = 112, instance = 1 zwave.0 2020-02-13 20:39:20.218 info (17244) State created: zwave.0.NODE9.THERMOSTAT_SETPOINT.Unused_1 = undefined, index = 3, comClass = 67, instance = 1 zwave.0 2020-02-13 20:39:20.209 info (17244) Channel created: zwave.0.NODE9.THERMOSTAT_SETPOINT = 0.0, index = 3, comClass = 67, instance = 1 zwave.0 2020-02-13 20:39:20.205 info (17244) State created: zwave.0.NODE9.THERMOSTAT_SETPOINT.Cooling_1 = undefined, index = 2, comClass = 67, instance = 1 zwave.0 2020-02-13 20:39:20.201 info (17244) Channel created: zwave.0.NODE9.THERMOSTAT_SETPOINT = 0.0, index = 2, comClass = 67, instance = 1 zwave.0 2020-02-13 20:39:20.196 info (17244) State created: zwave.0.NODE9.THERMOSTAT_SETPOINT.Heating_1 = undefined, index = 1, comClass = 67, instance = 1 zwave.0 2020-02-13 20:39:20.191 info (17244) Channel created: zwave.0.NODE9.THERMOSTAT_SETPOINT = 0.0, index = 1, comClass = 67, instance = 1 zwave.0 2020-02-13 20:39:20.186 info (17244) State created: zwave.0.NODE9.MANUFACTURER_SPECIFIC.Loaded_Config_Revision = undefined, index = 0, comClass = 114, instance = 1 zwave.0 2020-02-13 20:39:20.182 info (17244) Channel created: zwave.0.NODE9.MANUFACTURER_SPECIFIC = 9, index = 0, comClass = 114, instance = 1 zwave.0 2020-02-13 20:39:20.177 info (17244) State created: zwave.0.NODE9.MANUFACTURER_SPECIFIC.Config_File_Revision = undefined, index = 1, comClass = 114, instance = 1 zwave.0 2020-02-13 20:39:20.172 info (17244) Channel created: zwave.0.NODE9.MANUFACTURER_SPECIFIC = 9, index = 1, comClass = 114, instance = 1 zwave.0 2020-02-13 20:39:20.111 info (17244) State created: zwave.0.NODE9.WAKE_UP.Wake-up_Interval = undefined, index = 0, comClass = 132, instance = 1 zwave.0 2020-02-13 20:39:20.104 info (17244) Channel created: zwave.0.NODE9.WAKE_UP = 3600, index = 0, comClass = 132, instance = 1 zwave.0 2020-02-13 20:39:20.098 info (17244) State created: zwave.0.NODE9.MANUFACTURER_SPECIFIC.Serial_Number = undefined, index = 4, comClass = 114, instance = 1 -
Hallo zusammen,
hat einer vielleicht eine Idee? Sonst würde ich mich wieder von dem Heizungssystem von Devolo trennen. -
Hallo zusammen,
Da ich leider zu dem thema nichts im Forum gefunden habe noch mal den Aufruf ob einer eine Idee hat oder helfen kann? -
Ich denke da wirst du mit einem kleinen Script rangehen müssen, statt Association (Verknüpfung)
-
Ich denke da wirst du mit einem kleinen Script rangehen müssen, statt Association (Verknüpfung)
@cburghardt
Danke für deine Antwort. Dann ist für mich das ganze unbrauchbar weil ich die Heizung nur abfragen möchte und sie Standalone funktionieren soll.Aktuell habe ich eine Steuerung und somit wäre es für mich keine Verbesserung sondern Verschlechterung.
Support us
646
Online32.7k
Benutzer82.3k
Themen1.3m
Beiträge