Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter

V8Turbo

So bin jetzt mit einer aktuelleren Liste weiter gekommen... Für alle die es Interessiert hier Angehangen. Die Adressen in DEC umrechnen dann bekomme ich zumindest Werte. Leider habe ich wohl aber ein Kommunicationsproblem (?).

modbus.0
2023-01-12 11:52:27.690	info	Disconnected from slave

modbus.0
2023-01-12 11:52:26.690	warn	Poll error count: 3 code: {"err":"timeout","timeout":5000}

modbus.0
2023-01-12 11:52:26.689	error	Request timed out.

modbus.0
2023-01-12 11:52:26.688	warn	Error: undefined

modbus.0
2023-01-12 11:52:21.763	error	unknown function code: 0x0, 0x0

modbus.0
2023-01-12 11:52:21.741	error	Wrong CRC for frame: 255,1,3,46,9,40,0,219

modbus.0
2023-01-12 11:52:21.685	debug	[DevID_1/holdingRegs] Poll address 1165 - 23 registers

Hier komplett...

v6.3.5

12
10
Log-Größe: 25.6 KB

1
Zeit
debug
Nachricht

modbus.0
2023-01-12 11:50:15.660	debug	Cleaning up request fifo.

modbus.0
2023-01-12 11:50:15.658	debug	Clearing timeout of the current request.

modbus.0
2023-01-12 11:50:15.654	info	Disconnected from slave

modbus.0
2023-01-12 11:50:14.652	warn	Poll error count: 1 code: {"err":"timeout","timeout":5000}

modbus.0
2023-01-12 11:50:14.651	error	Request timed out.

modbus.0
2023-01-12 11:50:14.649	warn	Error: undefined

modbus.0
2023-01-12 11:50:09.726	error	unknown function code: 0x0, 0x0

modbus.0
2023-01-12 11:50:09.704	error	Wrong CRC for frame: 255,1,3,46,9,38,0,221

modbus.0
2023-01-12 11:50:09.647	debug	[DevID_1/holdingRegs] Poll address 1165 - 23 registers

modbus.0
2023-01-12 11:50:09.645	debug	[DevID_1] Poll start ---------------------

modbus.0
2023-01-12 11:50:03.538	debug	[DevID_1/holdingRegs] Poll address 1165 DONE

modbus.0
2023-01-12 11:50:03.452	debug	[DevID_1/holdingRegs] Poll address 1165 - 23 registers

modbus.0
2023-01-12 11:50:03.452	debug	Initialization of scale factors done!

modbus.0
2023-01-12 11:50:03.450	debug	[DevID_1] Poll start ---------------------

modbus.0
2023-01-12 11:50:03.449	info	Connected to slave

modbus.0
2023-01-12 11:50:03.440	debug	connect to serial /dev/ttyUSB0 with 9600

modbus.0
2023-01-12 11:50:03.142	debug	Add holdingRegisters._Voltage_Phase_T: {"_id":"holdingRegisters._Voltage_Phase_T","type":"state","common":{"name":"","role":"level","type":"number","read":true,"write":true,"def":0,"unit":"V"},"native":{"regType":"holdingRegs","address":1187,"deviceId":1,"type":"uint16be","len":1,"offset":0,"factor":1,"poll":true}}

modbus.0
2023-01-12 11:50:03.142	debug	Add holdingRegisters._Voltage_Phase_S: {"_id":"holdingRegisters._Voltage_Phase_S","type":"state","common":{"name":"","role":"level","type":"number","read":true,"write":true,"def":0,"unit":"V"},"native":{"regType":"holdingRegs","address":1176,"deviceId":1,"type":"uint16be","len":1,"offset":0,"factor":1,"poll":true}}

modbus.0
2023-01-12 11:50:03.141	debug	Add holdingRegisters._Voltage_Phase_R: {"_id":"holdingRegisters._Voltage_Phase_R","type":"state","common":{"name":"","role":"level","type":"number","read":true,"write":true,"def":0,"unit":"V"},"native":{"regType":"holdingRegs","address":1165,"deviceId":1,"type":"uint16be","len":1,"offset":0,"factor":1,"poll":true}}

modbus.0
2023-01-12 11:50:03.141	debug	Initialize Objects for holdingRegs: [{"_address":1165,"name":"Voltage_Phase_R","description":"","unit":"V","type":"uint16be","len":1,"factor":1,"offset":0,"formula":"","role":"level","room":"","poll":true,"wp":"","cw":"","isScale":"","address":1165,"deviceId":1,"id":"holdingRegisters._Voltage_Phase_R"},{"_address":1176,"name":"Voltage_Phase_S","description":"","unit":"V","type":"uint16be","len":1,"factor":1,"offset":0,"formula":"","role":"level","room":"","poll":true,"wp":"","cw":"","isScale":"","address":1176,"deviceId":1,"id":"holdingRegisters._Voltage_Phase_S"},{"_address":1187,"name":"Voltage_Phase_T","description":"","unit":"V","type":"uint16be","len":1,"factor":1,"offset":0,"formula":"","role":"level","room":"","poll":true,"wp":"","cw":"","isScale":"","address":1187,"deviceId":1,"id":"holdingRegisters._Voltage_Phase_T"}]

modbus.0
2023-01-12 11:50:03.140	debug	Initialize Objects for inputRegs: []

modbus.0
2023-01-12 11:50:03.139	debug	Initialize Objects for coils: []

modbus.0
2023-01-12 11:50:03.138	debug	Initialize Objects for disInputs: []

SOFAR-G3 External Modbus Protocol-EN-V1.10 (20220622).xlsx

Glasfaser

@v8turbo

Ich kann dir bei deinem Wechselrichter nicht weiterhelfen .

aber du stocherst nur rum ... ich würde das nicht mit ioBroker machen .

Mache es so , mit einem Windows Programm QModMaster , zuerst alles raussuchen :

https://forum.iobroker.net/post/829310

V8Turbo

@glasfaser said in Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter:

QModMaster

Naja die Adressen habe ich jetzt ja, diese passen. Hab jetzt von allen 3 Phasen die Voltage ausgelesen und die speichert es auch korrekt in den Objekten. Ich denke es ist hier ein Einstellungsproblem beim RS 485 Adapter ?!

Brauche ich den einen Widerstand ? Habe vom Wechselrichter zum Raspi / Adapter ca. 40m Leitung Cat 7. Die ist aber 2x offen mit wago Klemmen.

wendy2702

@v8turbo Bei 40m ist ein Widerstand eigentlich kein muss.

Ich denke eher es liegt an den Kommunikations Einstellungen.

Woher kommst du z.B. auf 9600Baud ?
Was ist mit Parity, Bits etc?

Bei Modbus RTU über RS485 kann es erforderlich sein das du zwischen den Registern keine Lücke bei der Abfrage haben darfst.

Beispiel: Du benötigst Register 1,2, 6,7,8 Dann muss du 3,4,5 auch eintragen.

Habe ich das richtig gesehen das der WLAN kann? Wenn ja, was geht über WLAN?

V8Turbo

@wendy2702 Über WLAN ist der mit der Cloud verbunden, Solarman PV heißt die APP. Mehr geht nicht (?).

Einstellung
TCP Serial = Serial
Port = /dev/ttyUSB0
Baud = 9600
Data bits = 8
Stop bits = 1
Parity = none
Device ID = 1

General
Do not align addresses to 16 bits

Data polling = 1000 ms
Reconnect delay = 10000 ms
Read timeout = 4000 ms
Pulse time = 1000 ms
Wait time = 100 ms
Max read request length (float) = 60
Max read request length (booleans) = 60
Read interval = 150 ms
Write interval = 150 ms

Alle anderen haben keinen haken

V8Turbo

@wendy2702 said in Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter:

Bei Modbus RTU übner RS485 kann es erforderlich sein das du zwischen den Registern keine Lücke bei der Abfrage haben darfst.

Heißt ich muss alle Abfragen ?

Glasfaser

@wendy2702 sagte in Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter:
Beispiel: Du benötigst Register 1,2, 6,7,8 Dann muss du 3,4,5 auch eintragen.

Er meint das , wenn du in der Instanzeinstellung den Poll nicht angehakt hast , bei 3,4,5

Was ist mit nur einer RegisterAbfrage ( die anderen löschen ) in der Instanzeinstellung , kommt die gleiche Meldung

V8Turbo

Also alle Zahlen von 1 - 1056 und dann 1057-1156 usw. eintragen oder wie meinst du das ?

Hatte noch das hier gefunden, ist das immernoch so ?
https://forum.iobroker.net/topic/22126/adapter-modbus-mehrere-geräte-ids-timeout-beim-auslesen-von-mehr-als-einen-teilnehmern/17

V8Turbo

@glasfaser auch mit einem Register noch das gleiche...


modbus.0
2023-01-12 15:37:45.699	debug	Cleaning up request fifo.

modbus.0
2023-01-12 15:37:45.698	debug	Clearing timeout of the current request.

modbus.0
2023-01-12 15:37:45.694	info	Disconnected from slave

modbus.0
2023-01-12 15:37:44.693	warn	Poll error count: 1 code: {"err":"timeout","timeout":4000}

modbus.0
2023-01-12 15:37:44.690	error	Request timed out.

modbus.0
2023-01-12 15:37:44.689	warn	Error: undefined

modbus.0
2023-01-12 15:37:40.681	debug	[DevID_1/holdingRegs] Poll address 1056 - 1 registers

modbus.0
2023-01-12 15:37:40.681	debug	Initialization of scale factors done!

modbus.0
2023-01-12 15:37:40.679	debug	[DevID_1] Poll start ---------------------

modbus.0
2023-01-12 15:37:40.678	info	Connected to slave

modbus.0
2023-01-12 15:37:40.669	debug	connect to serial /dev/ttyUSB0 with 2400

Sporadisch läuft alles durch, dann geht es wieder 3,4,5x nicht

wendy2702

@v8turbo sagte in Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter:

connect to serial /dev/ttyUSB0 with 2400

Wieso jetzt 2400 ?

Die Werte müssen sich mit den Kommunikations Einstellungen vom WR decken.

V8Turbo

@wendy2702 habe rum probiert. Der WR hat 9600 eingestellt.

Glasfaser

@V8Turbo

@glasfaser sagte in Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter:
Was ist mit nur einer RegisterAbfrage ( die anderen löschen ) in der Instanzeinstellung , kommt die gleiche Meldung

Was war hiermit

V8Turbo

@glasfaser siehe 2 Beiträge weiter oben...

"@glasfaser auch mit einem Register noch das gleiche..."

Glasfaser

@v8turbo sagte in Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter:

"@glasfaser auch mit einem Register noch das gleiche..."

dann würde ich erstmal nur mit einem weitermachen !

Das Problem ist du wechselst immer hin und her .

Welche aktuellen Einstellungen hast du in der Instanz
einen aktuellen ioBroker Log mit nur einem Register wo ein Fehler kommt ..
wird auch der Wert im Datenpunkt geschrieben , ist er auch richtig !?

V8Turbo

@glasfaser Anbei die aktuellen Werte. Der WR ist auch auf 9600 eingestellt.

Im Holding Register ist jetzt nur ein Eintrag

_address	name	description	unit	type	len	factor	offset	formula	role	room	poll	wp	cw	isScale
1412	Voltage_PV1		V	uint16be	1	0,1	0		state		true	false	false	false

Aktuelles Log von gerade Ebend.


modbus.0
2023-01-13 07:32:40.268	debug	Cleaning up request fifo.

modbus.0
2023-01-13 07:32:40.267	debug	Clearing timeout of the current request.

modbus.0
2023-01-13 07:32:40.263	info	Disconnected from slave

modbus.0
2023-01-13 07:32:39.566	debug	[DevID_2/holdingRegs] Poll address 1412 - 1 registers

modbus.0
2023-01-13 07:32:39.565	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 07:32:39.263	warn	Poll error count: 2 code: {"err":"timeout","timeout":4000}

modbus.0
2023-01-13 07:32:39.262	error	Request timed out.

modbus.0
2023-01-13 07:32:39.261	warn	Error: undefined

modbus.0
2023-01-13 07:32:35.291	error	Wrong CRC for frame: 255,2,3,2,4,172,254,249

modbus.0
2023-01-13 07:32:35.259	debug	[DevID_2/holdingRegs] Poll address 1412 - 1 registers

modbus.0
2023-01-13 07:32:35.258	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 07:32:35.255	info	Connected to slave

modbus.0
2023-01-13 07:32:35.249	debug	connect to serial /dev/ttyUSB0 with 9600

modbus.0
2023-01-13 07:32:29.251	debug	Cleaning up request fifo.

modbus.0
2023-01-13 07:32:29.250	debug	Clearing timeout of the current request.

modbus.0
2023-01-13 07:32:29.248	info	Disconnected from slave

modbus.0
2023-01-13 07:32:28.550	debug	[DevID_2/holdingRegs] Poll address 1412 - 1 registers

modbus.0
2023-01-13 07:32:28.549	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 07:32:28.248	warn	Poll error count: 1 code: {"err":"timeout","timeout":4000}

modbus.0
2023-01-13 07:32:28.247	error	Request timed out.

modbus.0
2023-01-13 07:32:28.246	warn	Error: undefined

modbus.0
2023-01-13 07:32:24.277	error	Wrong CRC for frame: 255,2,3,2,7,173,63,201

modbus.0
2023-01-13 07:32:24.244	debug	[DevID_2/holdingRegs] Poll address 1412 - 1 registers

modbus.0
2023-01-13 07:32:24.243	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 07:32:23.740	debug	[DevID_2/holdingRegs] Poll address 1412 DONE

modbus.0
2023-01-13 07:32:23.707	debug	[DevID_2/holdingRegs] Poll address 1412 - 1 registers

modbus.0
2023-01-13 07:32:23.706	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 07:32:23.704	info	Connected to slave

modbus.0
2023-01-13 07:32:23.695	debug	connect to serial /dev/ttyUSB0 with 9600

modbus.0
2023-01-13 07:32:17.697	debug	Cleaning up request fifo.

modbus.0
2023-01-13 07:32:17.696	debug	Clearing timeout of the current request.

modbus.0
2023-01-13 07:32:17.693	info	Disconnected from slave

modbus.0
2023-01-13 07:32:16.995	debug	[DevID_2/holdingRegs] Poll address 1412 - 1 registers

modbus.0
2023-01-13 07:32:16.994	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 07:32:16.693	warn	Poll error count: 2 code: {"err":"timeout","timeout":4000}

modbus.0
2023-01-13 07:32:16.692	error	Request timed out.

modbus.0
2023-01-13 07:32:16.690	warn	Error: undefined

modbus.0
2023-01-13 07:32:12.721	error	Wrong CRC for frame: 3,2,4,250,126,199,255,2,3

modbus.0
2023-01-13 07:32:12.688	debug	[DevID_2/holdingRegs] Poll address 1412 - 1 registers

modbus.0
2023-01-13 07:32:12.687	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 07:32:12.686	info	Connected to slave

modbus.0
2023-01-13 07:32:12.677	debug	connect to serial /dev/ttyUSB0 with 9600

modbus.0
2023-01-13 07:32:06.678	debug	Cleaning up request fifo.

modbus.0
2023-01-13 07:32:06.677	debug	Clearing timeout of the current request.

modbus.0
2023-01-13 07:32:06.675	info	Disconnected from slave

modbus.0
2023-01-13 07:32:05.976	debug	[DevID_2/holdingRegs] Poll address 1412 - 1 registers

modbus.0
2023-01-13 07:32:05.975	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 07:32:05.673	warn	Poll error count: 1 code: {"err":"timeout","timeout":4000}

modbus.0
2023-01-13 07:32:05.673	error	Request timed out.

modbus.0
2023-01-13 07:32:05.672	warn	Error: undefined

modbus.0
2023-01-13 07:32:01.668	debug	[DevID_2/holdingRegs] Poll address 1412 - 1 registers

modbus.0
2023-01-13 07:32:01.667	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 07:32:01.165	debug	[DevID_2/holdingRegs] Poll address 1412 DONE

modbus.0
2023-01-13 07:32:01.133	debug	[DevID_2/holdingRegs] Poll address 1412 - 1 registers

modbus.0
2023-01-13 07:32:01.132	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 07:32:00.627	debug	[DevID_2/holdingRegs] Poll address 1412 DONE

modbus.0
2023-01-13 07:32:00.589	debug	[DevID_2/holdingRegs] Poll address 1412 - 1 registers

modbus.0
2023-01-13 07:32:00.588	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 07:32:00.587	info	Connected to slave

modbus.0
2023-01-13 07:32:00.579	debug	connect to serial /dev/ttyUSB0 with 9600

modbus.0
2023-01-13 07:31:54.579	debug	Cleaning up request fifo.

modbus.0
2023-01-13 07:31:54.578	debug	Clearing timeout of the current request.

modbus.0
2023-01-13 07:31:54.576	info	Disconnected from slave

modbus.0
2023-01-13 07:31:53.879	debug	[DevID_2/holdingRegs] Poll address 1412 - 1 registers

modbus.0
2023-01-13 07:31:53.877	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 07:31:53.576	warn	Poll error count: 1 code: {"err":"timeout","timeout":4000}

modbus.0
2023-01-13 07:31:53.573	error	Request timed out.

modbus.0
2023-01-13 07:31:53.572	warn	Error: undefined

modbus.0
2023-01-13 07:31:49.604	error	unknown function code: 0x20, 0xa0

modbus.0
2023-01-13 07:31:49.564	debug	[DevID_2/holdingRegs] Poll address 1412 - 1 registers

modbus.0
2023-01-13 07:31:49.564	debug	Initialization of scale factors done!

modbus.0
2023-01-13 07:31:49.562	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 07:31:49.561	info	Connected to slave

modbus.0
2023-01-13 07:31:49.554	debug	connect to serial /dev/ttyUSB0 with 9600

V8Turbo

Achso die Werte trägt er, auch wenn alle im Holding stehen sporadisch mal ein (siehe Log oben). Also ja die Werte trägt er irgendwann wenn die Connection klappt ein und die stimmen auch.

wendy2702

Wenn ich mir den Screenshot ansehe hast du schon einiges an den Grundeinstellungen verbogen.

ich würde mal mit diesen Beginnen:

Also nach Instanz Installation nur den haken bei "Aliases benutzen" raus machen.

Sicherstellen das der WR die gleichen Kommunikationseinstellungen verwendet die im Adapter eingestellt sind. > Baudrate, Data Bits, Stop Bits, Parität, Geräte ID

Im Holding Register nur 1 Register Eintragen bei dem das Ergebnis eindeutig ist:

Z.B. Frequenz HEX=484 DEC=1156 Unsigned 16bit Big Endian Faktor 0.01 Einheit Hz

Dann schauen ob was kommt.

Wenn nicht das Register in Holding löschen und bei Eingangsregister eintragen und testen.

Meine SMA WR haben z.B. Eingangsregister definiert.

V8Turbo

@wendy2702
Einstellungen sind so gesetzt... Bis auf den Haken bei "Adressen nicht auf 16bit...." der muss rein. (bzw. habe es auch gerade ohne probiert passiert das gleiche)

Sicherstellen das der WR die gleichen Kommunikationseinstellungen verwendet die im Adapter eingestellt sind. > Baudrate, Data Bits, Stop Bits, Parität, Geräte ID <- Wie soll ich das machen ? Es gibt nur eine Einstellung im WR und da kann man die BAUD eintragen. Anleitung steht auch nichts...

Holding Register, Eingangsregister kommt die gleiche Meldung im Log (siehe unten)...


modbus.0
2023-01-13 08:37:42.765	debug	Plugin sentry Initialize Plugin (enabled=true)

modbus.0
2023-01-13 08:40:01.661	debug	Cleaning up request fifo.

modbus.0
2023-01-13 08:40:01.660	debug	Clearing timeout of the current request.

modbus.0
2023-01-13 08:40:01.657	info	Disconnected from slave

modbus.0
2023-01-13 08:40:00.659	warn	Poll error count: 3 code: {"err":"timeout","timeout":5000}

modbus.0
2023-01-13 08:40:00.656	error	Request timed out.

modbus.0
2023-01-13 08:40:00.655	warn	Error: undefined

modbus.0
2023-01-13 08:39:55.652	debug	[DevID_2/inputRegs] Poll address 1412 - 1 registers

modbus.0
2023-01-13 08:39:55.651	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 08:39:55.650	info	Connected to slave

modbus.0
2023-01-13 08:39:55.643	debug	connect to serial /dev/ttyUSB0 with 9600

modbus.0
2023-01-13 08:38:55.646	debug	Cleaning up request fifo.

modbus.0
2023-01-13 08:38:55.644	debug	Clearing timeout of the current request.

modbus.0
2023-01-13 08:38:55.641	info	Disconnected from slave

modbus.0
2023-01-13 08:38:54.641	warn	Poll error count: 2 code: {"err":"timeout","timeout":5000}

modbus.0
2023-01-13 08:38:54.639	error	Request timed out.

modbus.0
2023-01-13 08:38:54.638	warn	Error: undefined

modbus.0
2023-01-13 08:38:49.634	debug	[DevID_2/inputRegs] Poll address 1412 - 1 registers

modbus.0
2023-01-13 08:38:49.633	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 08:38:49.632	info	Connected to slave

modbus.0
2023-01-13 08:38:49.623	debug	connect to serial /dev/ttyUSB0 with 9600

modbus.0
2023-01-13 08:37:49.627	debug	Cleaning up request fifo.

modbus.0
2023-01-13 08:37:49.626	debug	Clearing timeout of the current request.

modbus.0
2023-01-13 08:37:49.621	info	Disconnected from slave

modbus.0
2023-01-13 08:37:48.620	warn	Poll error count: 1 code: {"err":"timeout","timeout":5000}

modbus.0
2023-01-13 08:37:48.617	error	Request timed out.

modbus.0
2023-01-13 08:37:48.616	warn	Error: undefined

modbus.0
2023-01-13 08:37:43.609	debug	[DevID_2/inputRegs] Poll address 1412 - 1 registers

modbus.0
2023-01-13 08:37:43.608	debug	Initialization of scale factors done!

modbus.0
2023-01-13 08:37:43.606	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 08:37:43.605	info	Connected to slave

modbus.0
2023-01-13 08:37:43.586	debug	connect to serial /dev/ttyUSB0 with 9600

V8Turbo

Hab jetzt mal inverter Temperatur genommen statt PV Voltage... Aber ist ja das gleiche.

OHNE Haken bei Adressen 16bit bla bla...

modbus.0
2023-01-13 08:46:16.526	debug	Cleaning up request fifo.

modbus.0
2023-01-13 08:46:16.525	debug	Clearing timeout of the current request.

modbus.0
2023-01-13 08:46:16.522	info	Disconnected from slave

modbus.0
2023-01-13 08:46:15.521	warn	Poll error count: 2 code: {"err":"timeout","timeout":5000}

modbus.0
2023-01-13 08:46:15.520	error	Request timed out.

modbus.0
2023-01-13 08:46:15.518	warn	Error: undefined

modbus.0
2023-01-13 08:46:10.587	error	unknown function code: 0x20, 0x20

modbus.0
2023-01-13 08:46:10.517	debug	[DevID_2/holdingRegs] Poll address 1056 - 1 registers

modbus.0
2023-01-13 08:46:10.516	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 08:46:10.516	info	Connected to slave

modbus.0
2023-01-13 08:46:10.511	debug	connect to serial /dev/ttyUSB0 with 9600

modbus.0
2023-01-13 08:45:10.515	debug	Cleaning up request fifo.

modbus.0
2023-01-13 08:45:10.514	debug	Clearing timeout of the current request.

modbus.0
2023-01-13 08:45:10.509	info	Disconnected from slave

modbus.0
2023-01-13 08:45:09.507	warn	Poll error count: 1 code: {"err":"timeout","timeout":5000}

modbus.0
2023-01-13 08:45:09.505	error	Request timed out.

modbus.0
2023-01-13 08:45:09.504	warn	Error: undefined

modbus.0
2023-01-13 08:45:04.567	error	Error response: 20

modbus.0
2023-01-13 08:45:04.500	debug	[DevID_2/holdingRegs] Poll address 1056 - 1 registers

modbus.0
2023-01-13 08:45:04.499	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 08:45:03.444	debug	[DevID_2/holdingRegs] Poll address 1056 DONE

modbus.0
2023-01-13 08:45:03.405	debug	[DevID_2/holdingRegs] Poll address 1056 - 1 registers

modbus.0
2023-01-13 08:45:03.404	debug	Initialization of scale factors done!

modbus.0
2023-01-13 08:45:03.402	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 08:45:03.401	info	Connected to slave

modbus.0
2023-01-13 08:45:03.387	debug	connect to serial /dev/ttyUSB0 with 9600

modbus.0
2023-01-13 08:45:03.069	debug	Add holdingRegisters.1056_Temperature_Inv1: {"_id":"holdingRegisters.1056_Temperature_Inv1","type":"state","common":{"name":"","role":"state","type":"number","read":true,"write":true,"def":0,"unit":"°C"},"native":{"regType":"holdingRegs","address":1056,"deviceId":2,"type":"int16be","len":1,"offset":0,"factor":1,"poll":true}}

modbus.0
2023-01-13 08:45:03.068	debug	Initialize Objects for holdingRegs: [{"_address":"1056","name":"Temperature_Inv1","description":"","unit":"°C","type":"int16be","len":1,"factor":1,"offset":0,"formula":"","role":"state","room":"","poll":true,"wp":false,"cw":false,"isScale":false,"deviceId":2,"address":1056,"id":"holdingRegisters.1056_Temperature_Inv1"}]

modbus.0
2023-01-13 08:45:03.068	debug	Initialize Objects for inputRegs: []

modbus.0
2023-01-13 08:45:03.067	debug	Initialize Objects for coils: []

modbus.0
2023-01-13 08:45:03.066	debug	Initialize Objects for disInputs: []

modbus.0
2023-01-13 08:45:02.924	info	starting. Version 5.0.11 (non-npm: ioBroker/ioBroker.modbus) in /opt/iobroker/node_modules/iobroker.modbus, node: v16.19.0, js-controller: 4.0.24

modbus.0
2023-01-13 08:45:02.606	debug	Plugin sentry Initialize Plugin (enabled=true)
host.raspberrypi
2023-01-13 08:45:01.211	info	instance system.adapter.modbus.0 started with pid 5986

MIT Haken bei Adressen 16bit blabla...

modbus.0
2023-01-13 08:47:55.508	debug	Cleaning up request fifo.

modbus.0
2023-01-13 08:47:55.507	debug	Clearing timeout of the current request.

modbus.0
2023-01-13 08:47:55.504	info	Disconnected from slave

modbus.0
2023-01-13 08:47:54.503	warn	Poll error count: 1 code: {"err":"timeout","timeout":5000}

modbus.0
2023-01-13 08:47:54.501	error	Request timed out.

modbus.0
2023-01-13 08:47:54.499	warn	Error: undefined

modbus.0
2023-01-13 08:47:49.530	error	unknown function code: 0x20, 0x20

modbus.0
2023-01-13 08:47:49.497	debug	[DevID_2/holdingRegs] Poll address 1056 - 1 registers

modbus.0
2023-01-13 08:47:49.495	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 08:47:48.443	debug	[DevID_2/holdingRegs] Poll address 1056 DONE

modbus.0
2023-01-13 08:47:48.411	debug	[DevID_2/holdingRegs] Poll address 1056 - 1 registers

modbus.0
2023-01-13 08:47:48.410	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 08:47:47.356	debug	[DevID_2/holdingRegs] Poll address 1056 DONE

modbus.0
2023-01-13 08:47:47.323	debug	[DevID_2/holdingRegs] Poll address 1056 - 1 registers

modbus.0
2023-01-13 08:47:47.322	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 08:47:46.269	debug	[DevID_2/holdingRegs] Poll address 1056 DONE

modbus.0
2023-01-13 08:47:46.165	debug	[DevID_2/holdingRegs] Poll address 1056 - 1 registers

modbus.0
2023-01-13 08:47:46.163	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 08:47:45.109	debug	[DevID_2/holdingRegs] Poll address 1056 DONE

modbus.0
2023-01-13 08:47:45.076	debug	[DevID_2/holdingRegs] Poll address 1056 - 1 registers

modbus.0
2023-01-13 08:47:45.075	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 08:47:44.022	debug	[DevID_2/holdingRegs] Poll address 1056 DONE

modbus.0
2023-01-13 08:47:43.985	debug	[DevID_2/holdingRegs] Poll address 1056 - 1 registers

modbus.0
2023-01-13 08:47:43.984	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 08:47:42.930	debug	[DevID_2/holdingRegs] Poll address 1056 DONE

modbus.0
2023-01-13 08:47:42.892	debug	[DevID_2/holdingRegs] Poll address 1056 - 1 registers

modbus.0
2023-01-13 08:47:42.891	debug	Initialization of scale factors done!

modbus.0
2023-01-13 08:47:42.889	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-13 08:47:42.888	info	Connected to slave

modbus.0
2023-01-13 08:47:42.870	debug	connect to serial /dev/ttyUSB0 with 9600

Community Forum

NEWS

Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter

Support us

261

32.4k

81.4k

1.3m