Fehlermeldungen bei Installation mac
-
dann sollte aber auch wieder die Anleitung angepasst werden. `
dazu muss aber jemand a) es wissen und b) die Lösung haben.Wie gesagt, ich habe keine Äpfel und diejenigen, die es dort laufen haben installieren es nicht täglich neu.
Gruß
Rainer
-
Also, hab schon einiges Versucht, jetzt nochmal von Anfang an, genau nach Anleitung, kommt dieser Fehler:
Last login: Tue Jul 25 15:41:48 on ttys001 MacMini-LAN:~ MacMini$ cd /Users/MacMini/Documents/ioBroker MacMini-LAN:ioBroker MacMini$ npm install iobroker --unsafe-perm npm ERR! code ENOSELF npm ERR! Refusing to install package with name "iobroker" under a package npm ERR! also called "iobroker". Did you name your project the same npm ERR! as the dependency you're installing? npm ERR! npm ERR! For more information, see: npm ERR! <https: docs.npmjs.com/cli/install#limitations-of-npms-install-algorithm="">npm ERR! A complete log of this run can be found in: npm ERR! /Users/MacMini/.npm/_logs/2017-07-25T13_44_45_150Z-debug.log MacMini-LAN:ioBroker MacMini$</https:>Logfile:
0 info it worked if it ends with ok 1 verbose cli [ '/usr/local/bin/node', 1 verbose cli '/usr/local/bin/npm', 1 verbose cli 'install', 1 verbose cli 'iobroker', 1 verbose cli '--unsafe-perm' ] 2 info using npm@5.3.0 3 info using node@v8.2.1 4 verbose npm-session 8862e681e9efcc76 5 silly install loadCurrentTree 6 silly install readLocalPackageData 7 http fetch GET 304 https://registry.npmjs.org/iobroker 253ms (from cache) 8 silly pacote tag manifest for iobroker@latest fetched in 272ms 9 silly install loadIdealTree 10 silly install cloneCurrentTreeToIdealTree 11 silly install loadShrinkwrap 12 silly install loadAllDepsIntoIdealTree 13 verbose stack Error: Refusing to install package with name "iobroker" under a package 13 verbose stack also called "iobroker". Did you name your project the same 13 verbose stack as the dependency you're installing? 13 verbose stack 13 verbose stack For more information, see: 13 verbose stack <https: docs.npmjs.com/cli/install#limitations-of-npms-install-algorithm=""> 13 verbose stack at checkSelf (/usr/local/lib/node_modules/npm/lib/install/validate-args.js:64:14) 13 verbose stack at Array. <anonymous>(/usr/local/lib/node_modules/npm/node_modules/slide/lib/bind-actor.js:15:8) 13 verbose stack at LOOP (/usr/local/lib/node_modules/npm/node_modules/slide/lib/chain.js:15:14) 13 verbose stack at /usr/local/lib/node_modules/npm/node_modules/slide/lib/chain.js:18:7 13 verbose stack at hasMinimumFields (/usr/local/lib/node_modules/npm/lib/install/validate-args.js:30:12) 13 verbose stack at Array. <anonymous>(/usr/local/lib/node_modules/npm/node_modules/slide/lib/bind-actor.js:15:8) 13 verbose stack at LOOP (/usr/local/lib/node_modules/npm/node_modules/slide/lib/chain.js:15:14) 13 verbose stack at chain (/usr/local/lib/node_modules/npm/node_modules/slide/lib/chain.js:20:5) 13 verbose stack at /usr/local/lib/node_modules/npm/lib/install/validate-args.js:16:5 13 verbose stack at /usr/local/lib/node_modules/npm/node_modules/slide/lib/async-map.js:52:35 13 verbose stack at Array.forEach (native) 13 verbose stack at /usr/local/lib/node_modules/npm/node_modules/slide/lib/async-map.js:52:11 13 verbose stack at Array.forEach (native) 13 verbose stack at asyncMap (/usr/local/lib/node_modules/npm/node_modules/slide/lib/async-map.js:51:8) 13 verbose stack at module.exports (/usr/local/lib/node_modules/npm/lib/install/validate-args.js:15:3) 13 verbose stack at Array. <anonymous>(/usr/local/lib/node_modules/npm/node_modules/slide/lib/bind-actor.js:15:8) 14 verbose cwd /Users/MacMini/Documents/ioBroker 15 verbose Darwin 16.7.0 16 verbose argv "/usr/local/bin/node" "/usr/local/bin/npm" "install" "iobroker" "--unsafe-perm" 17 verbose node v8.2.1 18 verbose npm v5.3.0 19 error code ENOSELF 20 error Refusing to install package with name "iobroker" under a package 20 error also called "iobroker". Did you name your project the same 20 error as the dependency you're installing? 20 error 20 error For more information, see: 20 error <https: docs.npmjs.com/cli/install#limitations-of-npms-install-algorithm=""> 21 verbose exit [ 1, true ]</https:></anonymous></anonymous></anonymous></https:> -
Was hast du runtergeladen?
https://github.com/ioBroker/ioBroker.js-controller
oder
https://github.com/ioBroker/ioBroker ???
Sieht für mich aus als hättest du https://github.com/ioBroker/ioBroker runtergeladen..
In der Docu ist der falsche Link drin.
Versuch bitte mal:
Alles löschen was du runtergeladen hast, dann "npm clean" ausführen, dann https://github.com/ioBroker/ioBroker.js … master.zip runterladen. ( NICHT https://github.com/ioBroker/ioBroker/archive/master.zip!!!! )
Dann weiter wie in der Docu:
` > einen Ordner „iobroker“ an einem beliebigen Ort erstellen (z.B. unter /User/Dokumente)das .zip-file in diesen Ordner kopieren
Im Terminal in den soeben erstellten Ordner (z.B. „ioBroker“) gehen "cd /iobroker".
Tipp: Im Terminal cd eintippen und eben erstellten Ordner mir der Maus ins Terminalfenster ziehen.
Dann Return drücken.
ioBroker installieren "npm install iobroker –unsafe-perm"
im Terminal in das Unterverzeichnis iobroker.js-controller wechseln "cd node_modules/iobroker.js-controller"
Die Datei iobroker ausführbar machen "chmod +x iobroker"
Den Controller starten "node controller.js"
Nach der Installation den Browser öffnen und in der Adressleiste http://localhost:8081 eingeben `
-
In der Docu ist der falsche Link drin. `
Sorry, das kommt davon, wenn man mal eben in einem unbekannten Tutorial einen Link einfügt. :oops: :oops: :oops:Habe korrigiert.
Hoffentlich korrekt.
Gruß
Rainer
-
OK, jetzt kommt folgendes:
MacMini-LAN:ioBroker MacMini$ npm install iobroker --unsafe-perm > iobroker@1.0.0 install /Users/MacMini/Documents/ioBroker/node_modules/iobroker > node lib/setup.js npm install iobroker.discovery --production --prefix /Users/MacMini/Documents/ioBroker node-pre-gyp info it worked if it ends with ok node-pre-gyp verb cli [ '/usr/local/bin/node', node-pre-gyp verb cli '/Users/MacMini/Documents/ioBroker/node_modules/serialport/node_modules/.bin/node-pre-gyp', node-pre-gyp verb cli 'install', node-pre-gyp verb cli '--fallback-to-build' ] node-pre-gyp info using node-pre-gyp@0.6.32 node-pre-gyp info using node@8.2.1 | darwin | x64 node-pre-gyp verb command install [] node-pre-gyp info check checked for "/Users/MacMini/Documents/ioBroker/node_modules/serialport/build/Release/serialport.node" (not found) node-pre-gyp http GET https://github.com/EmergingTechnologyAdvisors/node-serialport/releases/download/4.0.7/serialport-v4.0.7-node-v57-darwin-x64.tar.gz node-pre-gyp http 404 https://github.com/EmergingTechnologyAdvisors/node-serialport/releases/download/4.0.7/serialport-v4.0.7-node-v57-darwin-x64.tar.gz node-pre-gyp ERR! Tried to download(404): https://github.com/EmergingTechnologyAdvisors/node-serialport/releases/download/4.0.7/serialport-v4.0.7-node-v57-darwin-x64.tar.gz node-pre-gyp ERR! Pre-built binaries not found for serialport@4.0.7 and node@8.2.1 (node-v57 ABI) (falling back to source compile with node-gyp) node-pre-gyp http 404 status code downloading tarball https://github.com/EmergingTechnologyAdvisors/node-serialport/releases/download/4.0.7/serialport-v4.0.7-node-v57-darwin-x64.tar.gz node-pre-gyp verb command build [ 'rebuild' ] ../src/serialport.cpp:90:44: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] return getValueFromObject(options, key)->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport.cpp:102:44: warning: 'ToNumber' is deprecated [-Wdeprecated-declarations] return getValueFromObject(options, key)->ToNumber()->NumberValue(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9300:22: note: 'ToNumber' has been explicitly marked deprecated here Local <number>Value::ToNumber() const { ^ ../src/serialport.cpp:174:23: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] int fd = argv[1]->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport.cpp:193:21: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] int fd = info[0]->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport.cpp:217:108: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] baton->baudRate = Nan::Get(options, Nan::New<v8::string>("baudRate").ToLocalChecked()).ToLocalChecked()->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport.cpp:252:21: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] int fd = info[0]->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport.cpp:369:24: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] baton->fd = info[0]->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport.cpp:480:21: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] int fd = info[0]->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport.cpp:528:21: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] int fd = info[0]->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport.cpp:585:21: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] int fd = info[0]->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ 10 warnings generated. ../src/serialport_unix.cpp:44:101: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] result->vmin = Nan::Get(options, Nan::New<v8::string>("vmin").ToLocalChecked()).ToLocalChecked()->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport_unix.cpp:45:103: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] result->vtime = Nan::Get(options, Nan::New<v8::string>("vtime").ToLocalChecked()).ToLocalChecked()->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ 2 warnings generated. ../src/serialport_poller.cpp:86:23: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] obj->fd_ = info[0]->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ 1 warning generated. node-pre-gyp info ok npm notice created a lockfile as package-lock.json. You should commit this file. npm install iobroker.admin --production --prefix /Users/MacMini/Documents/ioBroker shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory path.js:1163 cwd = process.cwd(); ^ Error: ENOENT: no such file or directory, uv_cwd at Object.resolve (path.js:1163:25) at Function.Module._resolveLookupPaths (module.js:408:17) at Function.Module._resolveFilename (module.js:480:22) at Function.Module._load (module.js:437:25) at Module.require (module.js:513:17) at require (internal/module.js:11:18) at /usr/local/lib/node_modules/npm/bin/npm-cli.js:19:21 at Object. <anonymous>(/usr/local/lib/node_modules/npm/bin/npm-cli.js:92:3) at Module._compile (module.js:569:30) at Object.Module._extensions..js (module.js:580:10) Cannot install as normal user. Try sudo... sudo npm install iobroker.admin --production --prefix /Users/MacMini/Documents/ioBroker shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory Password: Password:Sorry, try again. path.js:1163 cwd = process.cwd(); ^ Error: ENOENT: no such file or directory, uv_cwd at Object.resolve (path.js:1163:25) at Function.Module._resolveLookupPaths (module.js:408:17) at Function.Module._resolveFilename (module.js:480:22) at Function.Module._load (module.js:437:25) at Module.require (module.js:513:17) at require (internal/module.js:11:18) at /usr/local/lib/node_modules/npm/bin/npm-cli.js:19:21 at Object. <anonymous>(/usr/local/lib/node_modules/npm/bin/npm-cli.js:92:3) at Module._compile (module.js:569:30) at Object.Module._extensions..js (module.js:580:10) npm install iobroker.js-controller --production --prefix /Users/MacMini/Documents/ioBroker shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory path.js:1163 cwd = process.cwd(); ^ Error: ENOENT: no such file or directory, uv_cwd at Object.resolve (path.js:1163:25) at Function.Module._resolveLookupPaths (module.js:408:17) at Function.Module._resolveFilename (module.js:480:22) at Function.Module._load (module.js:437:25) at Module.require (module.js:513:17) at require (internal/module.js:11:18) at /usr/local/lib/node_modules/npm/bin/npm-cli.js:19:21 at Object. <anonymous>(/usr/local/lib/node_modules/npm/bin/npm-cli.js:92:3) at Module._compile (module.js:569:30) at Object.Module._extensions..js (module.js:580:10) Cannot install as normal user. Try sudo... sudo npm install iobroker.js-controller --production --prefix /Users/MacMini/Documents/ioBroker shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory path.js:1163 cwd = process.cwd(); ^ Error: ENOENT: no such file or directory, uv_cwd at Object.resolve (path.js:1163:25) at Function.Module._resolveLookupPaths (module.js:408:17) at Function.Module._resolveFilename (module.js:480:22) at Function.Module._load (module.js:437:25) at Module.require (module.js:513:17) at require (internal/module.js:11:18) at /usr/local/lib/node_modules/npm/bin/npm-cli.js:19:21 at Object. <anonymous>(/usr/local/lib/node_modules/npm/bin/npm-cli.js:92:3) at Module._compile (module.js:569:30) at Object.Module._extensions..js (module.js:580:10) Could not find "/Users/MacMini/Documents/ioBroker/node_modules/iobroker/lib/../../iobroker.js-controller/conf/iobroker-dist.json". Possible iobroker.js-controller was not installed Non-critical error: ENOENT: no such file or directory, mkdir '/Users/MacMini/Documents/ioBroker/node_modules/iobroker/lib/../../../log' + iobroker@1.0.0 added 46 packages in 89.892s MacMini-LAN:ioBroker MacMini$</anonymous></anonymous></anonymous></anonymous></int32></int32></v8::string></int32></v8::string></int32></int32></int32></int32></int32></int32></v8::string></int32></int32></number></int32>Logfile:
0 info it worked if it ends with ok 1 verbose cli [ '/usr/local/bin/node', 1 verbose cli '/usr/local/bin/npm', 1 verbose cli 'install', 1 verbose cli 'iobroker.js-controller', 1 verbose cli '--production', 1 verbose cli '--prefix', 1 verbose cli '/Users/MacMini/Documents/ioBroker' ] 2 info using npm@5.3.0 3 info using node@v8.2.1 4 verbose npm-session 5c87be63f17774e9 5 silly install loadCurrentTree 6 silly install readLocalPackageData 7 http fetch GET 304 https://registry.npmjs.org/iobroker.js-controller 396ms (from cache) 8 silly pacote tag manifest for iobroker.js-controller@latest fetched in 432ms 9 silly install loadIdealTree 10 silly install cloneCurrentTreeToIdealTree 11 silly install loadShrinkwrap 12 silly install loadAllDepsIntoIdealTree 13 verbose stack Error: Refusing to install package with name "iobroker.js-controller" under a package 13 verbose stack also called "iobroker.js-controller". Did you name your project the same 13 verbose stack as the dependency you're installing? 13 verbose stack 13 verbose stack For more information, see: 13 verbose stack <https: docs.npmjs.com/cli/install#limitations-of-npms-install-algorithm=""> 13 verbose stack at checkSelf (/usr/local/lib/node_modules/npm/lib/install/validate-args.js:64:14) 13 verbose stack at Array. <anonymous>(/usr/local/lib/node_modules/npm/node_modules/slide/lib/bind-actor.js:15:8) 13 verbose stack at LOOP (/usr/local/lib/node_modules/npm/node_modules/slide/lib/chain.js:15:14) 13 verbose stack at /usr/local/lib/node_modules/npm/node_modules/slide/lib/chain.js:18:7 13 verbose stack at hasMinimumFields (/usr/local/lib/node_modules/npm/lib/install/validate-args.js:30:12) 13 verbose stack at Array. <anonymous>(/usr/local/lib/node_modules/npm/node_modules/slide/lib/bind-actor.js:15:8) 13 verbose stack at LOOP (/usr/local/lib/node_modules/npm/node_modules/slide/lib/chain.js:15:14) 13 verbose stack at chain (/usr/local/lib/node_modules/npm/node_modules/slide/lib/chain.js:20:5) 13 verbose stack at /usr/local/lib/node_modules/npm/lib/install/validate-args.js:16:5 13 verbose stack at /usr/local/lib/node_modules/npm/node_modules/slide/lib/async-map.js:52:35 13 verbose stack at Array.forEach (native) 13 verbose stack at /usr/local/lib/node_modules/npm/node_modules/slide/lib/async-map.js:52:11 13 verbose stack at Array.forEach (native) 13 verbose stack at asyncMap (/usr/local/lib/node_modules/npm/node_modules/slide/lib/async-map.js:51:8) 13 verbose stack at module.exports (/usr/local/lib/node_modules/npm/lib/install/validate-args.js:15:3) 13 verbose stack at Array. <anonymous>(/usr/local/lib/node_modules/npm/node_modules/slide/lib/bind-actor.js:15:8) 14 verbose cwd /Users/MacMini/Documents/ioBroker/node_modules/iobroker 15 verbose Darwin 16.7.0 16 verbose argv "/usr/local/bin/node" "/usr/local/bin/npm" "install" "iobroker.js-controller" "--production" "--prefix" "/Users/MacMini/Documents/ioBroker" 17 verbose node v8.2.1 18 verbose npm v5.3.0 19 error code ENOSELF 20 error Refusing to install package with name "iobroker.js-controller" under a package 20 error also called "iobroker.js-controller". Did you name your project the same 20 error as the dependency you're installing? 20 error 20 error For more information, see: 20 error <https: docs.npmjs.com/cli/install#limitations-of-npms-install-algorithm=""> 21 verbose exit [ 1, true ]</https:></anonymous></anonymous></anonymous></https:> -
Da scheint auf Github etwas nicht mehr vorhanden zu sein. Siehe 404 Fehler in deinem Log.
-
Das Verzeichnis existiert nicht:
MacMini-LAN:ioBroker MacMini$ cd node_modules/iobroker.js-controlle -bash: cd: node_modules/iobroker.js-controlle: No such file or directory MacMini-LAN:ioBroker MacMini$ -
Diese 404 (zumindest die die ich auf die schnelle gefunden habe) sind "normal".
Beim serial port wird zuerst versucht ein fertiges Paket zu installieren. Dieses wird für Darwin nicht gefunden (also 404) dann geht die Installation in den build über und bastelt sich das Paket selber.
Also don't panic.
Aber während ich dies tippe kommt mir noch eine Idee, die kann ich aber nur in den Raum stellen, da ich mich mit Äpfeln gar nicht auskenne:
Bei RasPi et al. benötigt die Installation des serialports Root-Rechte. wie wird das Paket unter OS X installiert?
gibt es da auch so etwas wie root oder Administrator-Rechte?
Gruß
Rainer
-
Das wird versucht mit "sudo", wenn ich das richtig sehe:
Cannot install as normal user. Try sudo... sudo npm install iobroker.admin --production --prefix /Users/MacMini/Documents/ioBroker -
Versuch eine Ebene höher zu wechseln "cd .." dann wieder rein in das Verzeichnis mit "cd iobroker"
Dann nochmal die Installation versuchen (eventuell mit sudo)?
Wie oben gesagt:
Der Eintrag "error retrieving current directory: getcwd: cannot access parent directories: No such file or directory"
sagt eigentlich dass das Script nicht weiß wo es gerade ist..
Also raus aus dem Ordner und nochmal rein im gleichen Terminalfenster und dann nochmal die Installation versuchen.
-
Leider auch nicht:
MacMini-LAN:ioBroker MacMini$ cd .. MacMini-LAN:Documents MacMini$ cd iobroker MacMini-LAN:iobroker MacMini$ sudo npm install iobroker --unsafe-perm Password: > iobroker@1.0.0 install /Users/MacMini/Documents/ioBroker/node_modules/iobroker > node lib/setup.js npm install iobroker.discovery --production --prefix /Users/MacMini/Documents/ioBroker node-pre-gyp info it worked if it ends with ok node-pre-gyp verb cli [ '/usr/local/bin/node', node-pre-gyp verb cli '/Users/MacMini/Documents/ioBroker/node_modules/serialport/node_modules/.bin/node-pre-gyp', node-pre-gyp verb cli 'install', node-pre-gyp verb cli '--fallback-to-build' ] node-pre-gyp info using node-pre-gyp@0.6.32 node-pre-gyp info using node@8.2.1 | darwin | x64 node-pre-gyp verb command install [] node-pre-gyp info check checked for "/Users/MacMini/Documents/ioBroker/node_modules/serialport/build/Release/serialport.node" (not found) node-pre-gyp http GET https://github.com/EmergingTechnologyAdvisors/node-serialport/releases/download/4.0.7/serialport-v4.0.7-node-v57-darwin-x64.tar.gz node-pre-gyp http 404 https://github.com/EmergingTechnologyAdvisors/node-serialport/releases/download/4.0.7/serialport-v4.0.7-node-v57-darwin-x64.tar.gz node-pre-gyp ERR! Tried to download(404): https://github.com/EmergingTechnologyAdvisors/node-serialport/releases/download/4.0.7/serialport-v4.0.7-node-v57-darwin-x64.tar.gz node-pre-gyp ERR! Pre-built binaries not found for serialport@4.0.7 and node@8.2.1 (node-v57 ABI) (falling back to source compile with node-gyp) node-pre-gyp http 404 status code downloading tarball https://github.com/EmergingTechnologyAdvisors/node-serialport/releases/download/4.0.7/serialport-v4.0.7-node-v57-darwin-x64.tar.gz node-pre-gyp verb command build [ 'rebuild' ] ../src/serialport.cpp:90:44: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] return getValueFromObject(options, key)->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport.cpp:102:44: warning: 'ToNumber' is deprecated [-Wdeprecated-declarations] return getValueFromObject(options, key)->ToNumber()->NumberValue(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9300:22: note: 'ToNumber' has been explicitly marked deprecated here Local <number>Value::ToNumber() const { ^ ../src/serialport.cpp:174:23: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] int fd = argv[1]->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport.cpp:193:21: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] int fd = info[0]->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport.cpp:217:108: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] baton->baudRate = Nan::Get(options, Nan::New<v8::string>("baudRate").ToLocalChecked()).ToLocalChecked()->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport.cpp:252:21: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] int fd = info[0]->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport.cpp:369:24: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] baton->fd = info[0]->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport.cpp:480:21: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] int fd = info[0]->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport.cpp:528:21: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] int fd = info[0]->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport.cpp:585:21: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] int fd = info[0]->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ 10 warnings generated. ../src/serialport_unix.cpp:44:101: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] result->vmin = Nan::Get(options, Nan::New<v8::string>("vmin").ToLocalChecked()).ToLocalChecked()->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport_unix.cpp:45:103: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] result->vtime = Nan::Get(options, Nan::New<v8::string>("vtime").ToLocalChecked()).ToLocalChecked()->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ 2 warnings generated. ../src/serialport_poller.cpp:86:23: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] obj->fd_ = info[0]->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ 1 warning generated. node-pre-gyp info ok npm install iobroker.admin --production --prefix /Users/MacMini/Documents/ioBroker npm install iobroker.js-controller --production --prefix /Users/MacMini/Documents/ioBroker npm ERR! code ENOSELF npm ERR! Refusing to install package with name "iobroker.js-controller" under a package npm ERR! also called "iobroker.js-controller". Did you name your project the same npm ERR! as the dependency you're installing? npm ERR! npm ERR! For more information, see: npm ERR! <https: docs.npmjs.com/cli/install#limitations-of-npms-install-algorithm="">npm ERR! A complete log of this run can be found in: npm ERR! /Users/MacMini/.npm/_logs/2017-07-25T17_31_42_595Z-debug.log Cannot install as normal user. Try sudo... sudo npm install iobroker.js-controller --production --prefix /Users/MacMini/Documents/ioBroker npm ERR! code ENOSELF npm ERR! Refusing to install package with name "iobroker.js-controller" under a package npm ERR! also called "iobroker.js-controller". Did you name your project the same npm ERR! as the dependency you're installing? npm ERR! npm ERR! For more information, see: npm ERR! <https: docs.npmjs.com/cli/install#limitations-of-npms-install-algorithm="">npm ERR! A complete log of this run can be found in: npm ERR! /Users/MacMini/.npm/_logs/2017-07-25T17_31_45_952Z-debug.log Could not find "/Users/MacMini/Documents/ioBroker/node_modules/iobroker/lib/../../iobroker.js-controller/conf/iobroker-dist.json". Possible iobroker.js-controller was not installed Write "./iobroker start" to start the ioBroker Cannot set permissions of /Users/MacMini/Documents/ioBroker/node_modules/iobroker.js-controller/iobroker You can still manually copy Cannot create file /usr/bin/iobroker!. Non critical ----------------------------------------------------- You can manually copy file into /usr/bin/. Just write: sudo cp /Users/MacMini/Documents/ioBroker/node_modules/iobroker/install/iobroker /usr/bin/ sudo chmod 777 /usr/bin/iobroker ----------------------------------------------------- + iobroker@1.0.0 added 46 packages and removed 167 packages in 92.075s MacMini-LAN:iobroker MacMini$ cd node_modules/iobroker.js-controller -bash: cd: node_modules/iobroker.js-controller: No such file or directory MacMini-LAN:iobroker MacMini$</https:></https:></int32></int32></v8::string></int32></v8::string></int32></int32></int32></int32></int32></int32></v8::string></int32></int32></number></int32> -
Okay, ändere mal den Ordnernamen "/Users/MacMini/Documents/ioBroker/" in "/Users/MacMini/Documents/ioBrokermac/" also den ioBroker ordner in ioBrokermac umbennen.
Dann die installation nochmal versuchen. Gibts wieder einen Fehler?
Dann:
Existiert der Ordner iobroker.js-controller in dem neu umbenannten ioBrokermac Ordner?
Wenn ja, diesen auch umbenennen in iobrokermac.js-controller, dann in diesen Ordner reinwechseln und dort "sudo npm install iobroker.js-controller –production --prefix /Users/MacMini/Documents/ioBrokermac"
oder eventuell
"sudo npm install iobrokermac.js-controller --production --prefix /Users/MacMini/Documents/ioBrokermac"
oder eventuell
"sudo npm install iobroker.js-controller --production"
oder eventuell
"sudo npm install iobrokermac.js-controller --production" ...
Versuch macht kluch.. Oder wie heißt es so schön? -
Es kann sich hier auch um Zugriffsrechte handeln.
Bei der ioBroker Installation auf Linux muss der Ordner iobroker ALLE Rechte (777) haben.
Gruß
Rainer
-
Momentan sehe ich keine Probleme außer
` > npm ERR! Refusing to install package with name "iobroker.js-controller" under a packagenpm ERR! also called "iobroker.js-controller". Did you name your project the same
npm ERR! as the dependency you're installing? `
npm macht manchmal Probleme wenn der Ordnername der gleiche ist wie der von dem Paket welches installiert werden soll. Deswegen bitte nochmal meine Tipps von http://forum.iobroker.net/viewtopic.php?f=17&t=7343#p76997 ausprobieren und dann nochmal hier berichten wie es aussieht - wobei es natürlich nie schadet die Rechte auf 777 zu setzen.
Gruß
-
Erst mal Danke für deine Bemühungen
Ordner umbenannt in iobrokermac, installation mit sudo npm install iobroker –unsafe-perm
MacMini-LAN:ioBrokermac MacMini$ sudo npm install iobroker --unsafe-perm Password: > iobroker@1.0.0 install /Users/MacMini/Documents/ioBrokermac/node_modules/iobroker > node lib/setup.js npm install iobroker.discovery --production --prefix /Users/MacMini/Documents/ioBrokermac node-pre-gyp info it worked if it ends with ok node-pre-gyp verb cli [ '/usr/local/bin/node', node-pre-gyp verb cli '/Users/MacMini/Documents/ioBrokermac/node_modules/serialport/node_modules/.bin/node-pre-gyp', node-pre-gyp verb cli 'install', node-pre-gyp verb cli '--fallback-to-build' ] node-pre-gyp info using node-pre-gyp@0.6.32 node-pre-gyp info using node@8.2.1 | darwin | x64 node-pre-gyp verb command install [] node-pre-gyp info check checked for "/Users/MacMini/Documents/ioBrokermac/node_modules/serialport/build/Release/serialport.node" (not found) node-pre-gyp http GET https://github.com/EmergingTechnologyAdvisors/node-serialport/releases/download/4.0.7/serialport-v4.0.7-node-v57-darwin-x64.tar.gz node-pre-gyp http 404 https://github.com/EmergingTechnologyAdvisors/node-serialport/releases/download/4.0.7/serialport-v4.0.7-node-v57-darwin-x64.tar.gz node-pre-gyp ERR! Tried to download(404): https://github.com/EmergingTechnologyAdvisors/node-serialport/releases/download/4.0.7/serialport-v4.0.7-node-v57-darwin-x64.tar.gz node-pre-gyp ERR! Pre-built binaries not found for serialport@4.0.7 and node@8.2.1 (node-v57 ABI) (falling back to source compile with node-gyp) node-pre-gyp http 404 status code downloading tarball https://github.com/EmergingTechnologyAdvisors/node-serialport/releases/download/4.0.7/serialport-v4.0.7-node-v57-darwin-x64.tar.gz node-pre-gyp verb command build [ 'rebuild' ] ../src/serialport.cpp:90:44: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] return getValueFromObject(options, key)->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport.cpp:102:44: warning: 'ToNumber' is deprecated [-Wdeprecated-declarations] return getValueFromObject(options, key)->ToNumber()->NumberValue(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9300:22: note: 'ToNumber' has been explicitly marked deprecated here Local <number>Value::ToNumber() const { ^ ../src/serialport.cpp:174:23: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] int fd = argv[1]->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport.cpp:193:21: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] int fd = info[0]->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport.cpp:217:108: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] baton->baudRate = Nan::Get(options, Nan::New<v8::string>("baudRate").ToLocalChecked()).ToLocalChecked()->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport.cpp:252:21: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] int fd = info[0]->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport.cpp:369:24: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] baton->fd = info[0]->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport.cpp:480:21: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] int fd = info[0]->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport.cpp:528:21: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] int fd = info[0]->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport.cpp:585:21: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] int fd = info[0]->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ 10 warnings generated. ../src/serialport_unix.cpp:44:101: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] result->vmin = Nan::Get(options, Nan::New<v8::string>("vmin").ToLocalChecked()).ToLocalChecked()->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ ../src/serialport_unix.cpp:45:103: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] result->vtime = Nan::Get(options, Nan::New<v8::string>("vtime").ToLocalChecked()).ToLocalChecked()->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ 2 warnings generated. ../src/serialport_poller.cpp:86:23: warning: 'ToInt32' is deprecated [-Wdeprecated-declarations] obj->fd_ = info[0]->ToInt32()->Int32Value(); ^ /Users/MacMini/.node-gyp/8.2.1/include/node/v8.h:9336:21: note: 'ToInt32' has been explicitly marked deprecated here Local <int32>Value::ToInt32() const { ^ 1 warning generated. node-pre-gyp info ok npm install iobroker.admin --production --prefix /Users/MacMini/Documents/ioBrokermac npm install iobroker.js-controller --production --prefix /Users/MacMini/Documents/ioBrokermac npm ERR! code ENOSELF npm ERR! Refusing to install package with name "iobroker.js-controller" under a package npm ERR! also called "iobroker.js-controller". Did you name your project the same npm ERR! as the dependency you're installing? npm ERR! npm ERR! For more information, see: npm ERR! <https: docs.npmjs.com/cli/install#limitations-of-npms-install-algorithm="">npm ERR! A complete log of this run can be found in: npm ERR! /Users/MacMini/.npm/_logs/2017-07-26T13_59_40_371Z-debug.log Cannot install as normal user. Try sudo... sudo npm install iobroker.js-controller --production --prefix /Users/MacMini/Documents/ioBrokermac npm ERR! code ENOSELF npm ERR! Refusing to install package with name "iobroker.js-controller" under a package npm ERR! also called "iobroker.js-controller". Did you name your project the same npm ERR! as the dependency you're installing? npm ERR! npm ERR! For more information, see: npm ERR! <https: docs.npmjs.com/cli/install#limitations-of-npms-install-algorithm="">npm ERR! A complete log of this run can be found in: npm ERR! /Users/MacMini/.npm/_logs/2017-07-26T13_59_42_345Z-debug.log Could not find "/Users/MacMini/Documents/ioBrokermac/node_modules/iobroker/lib/../../iobroker.js-controller/conf/iobroker-dist.json". Possible iobroker.js-controller was not installed Write "./iobroker start" to start the ioBroker Cannot set permissions of /Users/MacMini/Documents/ioBrokermac/node_modules/iobroker.js-controller/iobroker You can still manually copy Cannot create file /usr/bin/iobroker!. Non critical ----------------------------------------------------- You can manually copy file into /usr/bin/. Just write: sudo cp /Users/MacMini/Documents/ioBrokermac/node_modules/iobroker/install/iobroker /usr/bin/ sudo chmod 777 /usr/bin/iobroker ----------------------------------------------------- + iobroker@1.0.0 removed 329 packages and updated 1 package in 86.429s MacMini-LAN:ioBrokermac MacMini$</https:></https:></int32></int32></v8::string></int32></v8::string></int32></int32></int32></int32></int32></int32></v8::string></int32></int32></number></int32>installation mit sudo npm install iobrokermac.js-controller –production --prefix /Users/MacMini/Documents/ioBrokermac
MacMini-LAN:ioBrokermac MacMini$ sudo npm install iobrokermac.js-controller --production --prefix /Users/MacMini/Documents/ioBrokermac npm ERR! code E404 npm ERR! 404 Not Found: iobrokermac.js-controller@latest npm ERR! A complete log of this run can be found in: npm ERR! /Users/MacMini/.npm/_logs/2017-07-26T14_02_24_890Z-debug.log MacMini-LAN:ioBrokermac MacMini$installation mit sudo npm install iobroker.js-controller –production
MacMini-LAN:ioBrokermac MacMini$ sudo npm install iobroker.js-controller --production npm ERR! code ENOSELF npm ERR! Refusing to install package with name "iobroker.js-controller" under a package npm ERR! also called "iobroker.js-controller". Did you name your project the same npm ERR! as the dependency you're installing? npm ERR! npm ERR! For more information, see: npm ERR! <https: docs.npmjs.com/cli/install#limitations-of-npms-install-algorithm="">npm ERR! A complete log of this run can be found in: npm ERR! /Users/MacMini/.npm/_logs/2017-07-26T14_03_43_461Z-debug.log MacMini-LAN:ioBrokermac MacMini$</https:>installation mit sudo npm install iobrokermac.js-controller –production
MacMini-LAN:ioBrokermac MacMini$ sudo npm install iobrokermac.js-controller --production npm ERR! code E404 npm ERR! 404 Not Found: iobrokermac.js-controller@latest npm ERR! A complete log of this run can be found in: npm ERR! /Users/MacMini/.npm/_logs/2017-07-26T14_05_40_972Z-debug.log MacMini-LAN:ioBrokermac MacMini$ -
Dann benenne den Ordner iobroker.js-controller um in iobrokermac.js-controller dann in den Ordner iobrokermac.js-controller rein gehen
und versuchen zu installieren mit
sudo npm install iobroker.js-controller –production (ohne das Mac im Namen)
Welche Ausgabe bekommst du dann? Ich denke wir nähern uns bald dem Ziel.. Eine paar Ideen hätte ich noch wenn das auch nicht klappt.
Von unterwegs gesendet
-
Also jetzt hast du mich abgehängt, den Ordner iobroker.js-controller gibt es doch eben gar nicht :?:
-
Existiert der Ordner /Users/MacMini/Documents/ioBrokermac/node_modules/ ??
Eventuell befindet sich der Ordner node_modules auch in irgend einem von den übergeordneten Ordnern?
-
ja, den Ordner gibt es.
-
und welche Ordner sind in diesem node_modules Ordner enthalten?
