NEWS
Error: ENOSPC: no space left on device, write
ioBroker Allgemein
36
Beiträge
2
Kommentatoren
3.5k
Aufrufe
2
Watching
-
Hi,
bekomme die obengenannte Fehlermeldung beim start des Docker container.
Frei sind eigentlich 1.2TB
Es lief die letzten Jahre ohne Probleme, habe aber gestern Platz frei gemacht auf dem Laufwerk und habe seither diesen Fehler.------------------------------------------------------------------------------- ----- Step 2 of 5: Detecting ioBroker installation ----- -------------------------------------------------------------------------------- Existing installation of ioBroker detected in /opt/iobroker. -------------------------------------------------------------------------------- ----- Step 3 of 5: Checking ioBroker installation ----- -------------------------------------------------------------------------------- (Re)Setting folder permissions (This might take a while! Please be patient!)... Done. sed: couldn't open temporary file /opt/iobroker/sed4XTKkt: No space left on device Fixing "sudo-bug" by replacing sudo in iobroker with gosu... Done. /opt/scripts/iobroker_startup.sh: line 212: [: !=: unary operator expected -------------------------------------------------------------------------------- ----- Step 4 of 5: Applying special settings ----- -------------------------------------------------------------------------------- Some adapters have special requirements/ settings which can be activated by the use of environment variables. For more information see ioBroker Docker Image Docs (https://docs.buanet.de/iobroker-docker-image/docs/). Usb-device-support is activated by ENV. Setting permissions for /dev/serial/by-id/zigbee... Done. -------------------------------------------------------------------------------- ----- Step 5 of 5: ioBroker startup ----- -------------------------------------------------------------------------------- Starting ioBroker... ENOSPC: no space left on device, open '/opt/iobroker/log/iobroker.2022-09-20.log' Error: ENOSPC: no space left on device, open '/opt/iobroker/log/iobroker.2022-09-20.log' # df -h Filesystem Size Used Avail Use% Mounted on /dev/loop2 50G 15G 35G 30% / tmpfs 64M 0 64M 0% /dev tmpfs 498G 0 498G 0% /sys/fs/cgroup shm 64M 0 64M 0% /dev/shm shfs 1,9T 739G 1,2T 39% /opt/iobroker /dev/loop2 50G 15G 35G 30% /etc/hosts tmpfs 498G 0 498G 0% /proc/acpi tmpfs 498G 0 498G 0% /sys/firmware -
Hi,
bekomme die obengenannte Fehlermeldung beim start des Docker container.
Frei sind eigentlich 1.2TB
Es lief die letzten Jahre ohne Probleme, habe aber gestern Platz frei gemacht auf dem Laufwerk und habe seither diesen Fehler.------------------------------------------------------------------------------- ----- Step 2 of 5: Detecting ioBroker installation ----- -------------------------------------------------------------------------------- Existing installation of ioBroker detected in /opt/iobroker. -------------------------------------------------------------------------------- ----- Step 3 of 5: Checking ioBroker installation ----- -------------------------------------------------------------------------------- (Re)Setting folder permissions (This might take a while! Please be patient!)... Done. sed: couldn't open temporary file /opt/iobroker/sed4XTKkt: No space left on device Fixing "sudo-bug" by replacing sudo in iobroker with gosu... Done. /opt/scripts/iobroker_startup.sh: line 212: [: !=: unary operator expected -------------------------------------------------------------------------------- ----- Step 4 of 5: Applying special settings ----- -------------------------------------------------------------------------------- Some adapters have special requirements/ settings which can be activated by the use of environment variables. For more information see ioBroker Docker Image Docs (https://docs.buanet.de/iobroker-docker-image/docs/). Usb-device-support is activated by ENV. Setting permissions for /dev/serial/by-id/zigbee... Done. -------------------------------------------------------------------------------- ----- Step 5 of 5: ioBroker startup ----- -------------------------------------------------------------------------------- Starting ioBroker... ENOSPC: no space left on device, open '/opt/iobroker/log/iobroker.2022-09-20.log' Error: ENOSPC: no space left on device, open '/opt/iobroker/log/iobroker.2022-09-20.log' # df -h Filesystem Size Used Avail Use% Mounted on /dev/loop2 50G 15G 35G 30% / tmpfs 64M 0 64M 0% /dev tmpfs 498G 0 498G 0% /sys/fs/cgroup shm 64M 0 64M 0% /dev/shm shfs 1,9T 739G 1,2T 39% /opt/iobroker /dev/loop2 50G 15G 35G 30% /etc/hosts tmpfs 498G 0 498G 0% /proc/acpi tmpfs 498G 0 498G 0% /sys/firmware@stubennatter sagte in Error: ENOSPC: no space left on device, write:
sed: couldn't open temporary file /opt/iobroker/sed4XTKkt: No space left on device
Was ist das für eine Datei !?
die gibt es nicht bei ioBroker ( auch nicht bei Docker )
EDIT :
Zeige auch mal das Verzeichniss was sonst noch drin ist
Bitte die Ausgabe in Code-Tags </>
ls -lh -
@stubennatter sagte in Error: ENOSPC: no space left on device, write:
sed: couldn't open temporary file /opt/iobroker/sed4XTKkt: No space left on device
Was ist das für eine Datei !?
die gibt es nicht bei ioBroker ( auch nicht bei Docker )
EDIT :
Zeige auch mal das Verzeichniss was sonst noch drin ist
Bitte die Ausgabe in Code-Tags </>
ls -lh@glasfaser ```
habe von buanet den docker container in Benutzung# ls -lh total 1,6M drwxrwxr-x+ 1 iobroker iobroker 9,8K Sep 19 02:00 backups drwxr-xr-x+ 1 iobroker iobroker 92 Mai 31 17:20 cache -rwxrwxrwx+ 1 iobroker iobroker 1,1K Nov 4 2019 CHANGELOG_FIXER_LINUX.md -rwxrwxrwx+ 1 iobroker iobroker 3,5K Nov 4 2019 CHANGELOG_INSTALLER_LINUX.md -rwxrwxrwx+ 1 iobroker iobroker 24K Nov 4 2019 fix_installation.sh drwxrwxrwx+ 1 iobroker iobroker 14 Nov 4 2019 install -rwxrwxrwx+ 1 iobroker iobroker 353 Mär 15 2022 INSTALLER_INFO.txt lrwxrwxrwx 1 iobroker iobroker 22 Mär 15 2022 iob -> /opt/iobroker/iobroker -rwxr-xr-x+ 1 iobroker iobroker 178 Sep 18 17:30 iobroker -rwxr-xr-x+ 1 iobroker iobroker 178 Sep 18 17:30 iobroker.bak drwxrwxrwx+ 1 iobroker iobroker 656 Sep 20 00:00 iobroker-data drwxrwxrwx+ 1 iobroker iobroker 136 Nov 4 2019 lib -rwxrwxrwx+ 1 iobroker iobroker 1,2K Nov 4 2019 LICENSE drwxrwxrwx+ 1 iobroker iobroker 1,2K Sep 20 05:32 log drwxrwxrwx+ 1 iobroker iobroker 27K Sep 19 14:36 node_modules -rwxrwxrwx+ 1 iobroker iobroker 4,0K Sep 19 14:36 package.json -rwxrwxrwx+ 1 iobroker iobroker 1,5M Sep 19 14:36 package-lock.json -rwxrwxrwx+ 1 iobroker iobroker 6,0K Nov 4 2019 README.md -rwxrwxrwx+ 1 iobroker iobroker 5,6K Aug 5 2021 reinstall.js -
@glasfaser ```
habe von buanet den docker container in Benutzung# ls -lh total 1,6M drwxrwxr-x+ 1 iobroker iobroker 9,8K Sep 19 02:00 backups drwxr-xr-x+ 1 iobroker iobroker 92 Mai 31 17:20 cache -rwxrwxrwx+ 1 iobroker iobroker 1,1K Nov 4 2019 CHANGELOG_FIXER_LINUX.md -rwxrwxrwx+ 1 iobroker iobroker 3,5K Nov 4 2019 CHANGELOG_INSTALLER_LINUX.md -rwxrwxrwx+ 1 iobroker iobroker 24K Nov 4 2019 fix_installation.sh drwxrwxrwx+ 1 iobroker iobroker 14 Nov 4 2019 install -rwxrwxrwx+ 1 iobroker iobroker 353 Mär 15 2022 INSTALLER_INFO.txt lrwxrwxrwx 1 iobroker iobroker 22 Mär 15 2022 iob -> /opt/iobroker/iobroker -rwxr-xr-x+ 1 iobroker iobroker 178 Sep 18 17:30 iobroker -rwxr-xr-x+ 1 iobroker iobroker 178 Sep 18 17:30 iobroker.bak drwxrwxrwx+ 1 iobroker iobroker 656 Sep 20 00:00 iobroker-data drwxrwxrwx+ 1 iobroker iobroker 136 Nov 4 2019 lib -rwxrwxrwx+ 1 iobroker iobroker 1,2K Nov 4 2019 LICENSE drwxrwxrwx+ 1 iobroker iobroker 1,2K Sep 20 05:32 log drwxrwxrwx+ 1 iobroker iobroker 27K Sep 19 14:36 node_modules -rwxrwxrwx+ 1 iobroker iobroker 4,0K Sep 19 14:36 package.json -rwxrwxrwx+ 1 iobroker iobroker 1,5M Sep 19 14:36 package-lock.json -rwxrwxrwx+ 1 iobroker iobroker 6,0K Nov 4 2019 README.md -rwxrwxrwx+ 1 iobroker iobroker 5,6K Aug 5 2021 reinstall.js@stubennatter sagte in Error: ENOSPC: no space left on device, write:
@glasfaser ```
habe von buanet den docker container in BenutzungJa ... das ist mir schon klar.
Aber was ist hiermit :
@glasfaser sagte in Error: ENOSPC: no space left on device, write:
@stubennatter sagte in Error: ENOSPC: no space left on device, write:
sed: couldn't open temporary file /opt/iobroker/sed4XTKkt: No space left on device
Was ist das für eine Datei !?
die gibt es nicht bei ioBroker ( auch nicht bei Docker ) -
@stubennatter sagte in Error: ENOSPC: no space left on device, write:
@glasfaser ```
habe von buanet den docker container in BenutzungJa ... das ist mir schon klar.
Aber was ist hiermit :
@glasfaser sagte in Error: ENOSPC: no space left on device, write:
@stubennatter sagte in Error: ENOSPC: no space left on device, write:
sed: couldn't open temporary file /opt/iobroker/sed4XTKkt: No space left on device
Was ist das für eine Datei !?
die gibt es nicht bei ioBroker ( auch nicht bei Docker )@glasfaser
keine Ahnung was das für eine Datei sein soll -
@glasfaser
keine Ahnung was das für eine Datei sein soll@stubennatter sagte in Error: ENOSPC: no space left on device, write:
@glasfaser
keine Ahnung was das für eine Datei sein sollWelche Image Version hast du , steht am anfang des Logs , du hast nur ab Step 2 gezeigt
-
@stubennatter sagte in Error: ENOSPC: no space left on device, write:
@glasfaser
keine Ahnung was das für eine Datei sein sollWelche Image Version hast du , steht am anfang des Logs , du hast nur ab Step 2 gezeigt
habe jetzt den Continer gelöscht und neu erstellt:
Jetzt kommt ein anderes File nicht mehr das was du mich gefragt hattest., --------------------------------------------------------------------------------, ------------------------- 2022-09-20 10:24:08 -------------------------, --------------------------------------------------------------------------------, , --------------------------------------------------------------------------------, ----- Welcome to your ioBroker-container! -----, ----- Startupscript is now running. -----, ----- Please be patient! -----, --------------------------------------------------------------------------------, , --------------------------------------------------------------------------------, ----- Debugging information -----, ----- -----, ----- System -----, ----- arch: x86_64 -----, ----- hostname: 495a20f2fe4b -----, ----- -----, ----- Docker-Image -----, ----- image: v7.0.1 -----, ----- build: 2022-07-05T18:51:52+00:00 -----, ----- -----, ----- Versions -----, ----- node: v16.15.1 -----, ----- npm: 8.11.0 -----, ----- -----, ----- ENV -----, ----- SETGID: 1000 -----, ----- SETUID: 1000 -----, ----- USBDEVICES: /dev/serial/by-id/zigbee -----, --------------------------------------------------------------------------------, , --------------------------------------------------------------------------------, ----- Step 1 of 5: Preparing container -----, --------------------------------------------------------------------------------, , Updating Linux packages on first run..., dpkg-preconfigure: unable to re-open stdin: , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../base-files_11.1+deb11u5_amd64.deb ... , Unpacking base-files (11.1+deb11u5) over (11.1+deb11u3) ... , Setting up base-files (11.1+deb11u5) ... , Installing new version of config file /etc/debian_version ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../bash_5.1-2+deb11u1_amd64.deb ... , update-alternatives: warning: alternative /usr/share/man/man7/bash-builtins.7.gz (part of link group builtins.7.gz) doesn't exist; removing from list of alternatives , update-alternatives: warning: /etc/alternatives/builtins.7.gz is dangling; it will be updated with best choice , Unpacking bash (5.1-2+deb11u1) over (5.1-2+b3) ... , Setting up bash (5.1-2+deb11u1) ... , update-alternatives: error: alternative path /usr/share/man/man7/bash-builtins.7.gz doesn't exist , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29333 files and directories currently installed.) , Preparing to unpack .../dpkg_1.20.12_amd64.deb ... , Unpacking dpkg (1.20.12) over (1.20.10) ... , Setting up dpkg (1.20.12) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29333 files and directories currently installed.) , Preparing to unpack .../libc-devtools_2.31-13+deb11u4_amd64.deb ... , Unpacking libc-devtools (2.31-13+deb11u4) over (2.31-13+deb11u3) ... , Preparing to unpack .../libc6-dev_2.31-13+deb11u4_amd64.deb ... , Unpacking libc6-dev:amd64 (2.31-13+deb11u4) over (2.31-13+deb11u3) ... , Preparing to unpack .../libc-dev-bin_2.31-13+deb11u4_amd64.deb ... , Unpacking libc-dev-bin (2.31-13+deb11u4) over (2.31-13+deb11u3) ... , Preparing to unpack .../linux-libc-dev_5.10.140-1_amd64.deb ... , Unpacking linux-libc-dev:amd64 (5.10.140-1) over (5.10.120-1) ... , Preparing to unpack .../libc6_2.31-13+deb11u4_amd64.deb ... , Unpacking libc6:amd64 (2.31-13+deb11u4) over (2.31-13+deb11u3) ... , Setting up libc6:amd64 (2.31-13+deb11u4) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../libc-bin_2.31-13+deb11u4_amd64.deb ... , Unpacking libc-bin (2.31-13+deb11u4) over (2.31-13+deb11u3) ... , Setting up libc-bin (2.31-13+deb11u4) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../libsystemd0_247.3-7+deb11u1_amd64.deb ... , Unpacking libsystemd0:amd64 (247.3-7+deb11u1) over (247.3-7) ... , Setting up libsystemd0:amd64 (247.3-7+deb11u1) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../libgnutls30_3.7.1-5+deb11u2_amd64.deb ... , Unpacking libgnutls30:amd64 (3.7.1-5+deb11u2) over (3.7.1-5) ... , Setting up libgnutls30:amd64 (3.7.1-5+deb11u2) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../libwbclient0_2%3a4.13.13+dfsg-1~deb11u5_amd64.deb ... , Unpacking libwbclient0:amd64 (2:4.13.13+dfsg-1~deb11u5) over (2:4.13.13+dfsg-1~deb11u3) ... , Preparing to unpack .../libk5crypto3_1.18.3-6+deb11u2_amd64.deb ... , Unpacking libk5crypto3:amd64 (1.18.3-6+deb11u2) over (1.18.3-6+deb11u1) ... , Setting up libk5crypto3:amd64 (1.18.3-6+deb11u2) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../libkrb5support0_1.18.3-6+deb11u2_amd64.deb ... , Unpacking libkrb5support0:amd64 (1.18.3-6+deb11u2) over (1.18.3-6+deb11u1) ... , Setting up libkrb5support0:amd64 (1.18.3-6+deb11u2) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../libkrb5-3_1.18.3-6+deb11u2_amd64.deb ... , Unpacking libkrb5-3:amd64 (1.18.3-6+deb11u2) over (1.18.3-6+deb11u1) ... , Setting up libkrb5-3:amd64 (1.18.3-6+deb11u2) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../libgssapi-krb5-2_1.18.3-6+deb11u2_amd64.deb ... , Unpacking libgssapi-krb5-2:amd64 (1.18.3-6+deb11u2) over (1.18.3-6+deb11u1) ... , Setting up libgssapi-krb5-2:amd64 (1.18.3-6+deb11u2) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../libssl1.1_1.1.1n-0+deb11u3_amd64.deb ... , Unpacking libssl1.1:amd64 (1.1.1n-0+deb11u3) over (1.1.1n-0+deb11u2) ... , Setting up libssl1.1:amd64 (1.1.1n-0+deb11u3) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../libpcre2-dev_10.36-2+deb11u1_amd64.deb ... , Unpacking libpcre2-dev:amd64 (10.36-2+deb11u1) over (10.36-2) ... , Preparing to unpack .../libpcre2-16-0_10.36-2+deb11u1_amd64.deb ... , Unpacking libpcre2-16-0:amd64 (10.36-2+deb11u1) over (10.36-2) ... , Preparing to unpack .../libpcre2-32-0_10.36-2+deb11u1_amd64.deb ... , Unpacking libpcre2-32-0:amd64 (10.36-2+deb11u1) over (10.36-2) ... , Preparing to unpack .../libpcre2-posix2_10.36-2+deb11u1_amd64.deb ... , Unpacking libpcre2-posix2:amd64 (10.36-2+deb11u1) over (10.36-2) ... , Preparing to unpack .../libpcre2-8-0_10.36-2+deb11u1_amd64.deb ... , Unpacking libpcre2-8-0:amd64 (10.36-2+deb11u1) over (10.36-2) ... , Setting up libpcre2-8-0:amd64 (10.36-2+deb11u1) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../libtirpc-common_1.3.1-1+deb11u1_all.deb ... , Unpacking libtirpc-common (1.3.1-1+deb11u1) over (1.3.1-1) ... , Setting up libtirpc-common (1.3.1-1+deb11u1) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../libtirpc-dev_1.3.1-1+deb11u1_amd64.deb ... , Unpacking libtirpc-dev:amd64 (1.3.1-1+deb11u1) over (1.3.1-1) ... , Preparing to unpack .../libtirpc3_1.3.1-1+deb11u1_amd64.deb ... , Unpacking libtirpc3:amd64 (1.3.1-1+deb11u1) over (1.3.1-1) ... , Setting up libtirpc3:amd64 (1.3.1-1+deb11u1) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../libudev-dev_247.3-7+deb11u1_amd64.deb ... , Unpacking libudev-dev:amd64 (247.3-7+deb11u1) over (247.3-7) ... , Preparing to unpack .../udev_247.3-7+deb11u1_amd64.deb ... , Unpacking udev (247.3-7+deb11u1) over (247.3-7) ... , Preparing to unpack .../libudev1_247.3-7+deb11u1_amd64.deb ... , Unpacking libudev1:amd64 (247.3-7+deb11u1) over (247.3-7) ... , Setting up libudev1:amd64 (247.3-7+deb11u1) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../zlib1g-dev_1%3a1.2.11.dfsg-2+deb11u2_amd64.deb ... , Unpacking zlib1g-dev:amd64 (1:1.2.11.dfsg-2+deb11u2) over (1:1.2.11.dfsg-2+deb11u1) ... , Preparing to unpack .../zlib1g_1%3a1.2.11.dfsg-2+deb11u2_amd64.deb ... , Unpacking zlib1g:amd64 (1:1.2.11.dfsg-2+deb11u2) over (1:1.2.11.dfsg-2+deb11u1) ... , Setting up zlib1g:amd64 (1:1.2.11.dfsg-2+deb11u2) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../00-tzdata_2021a-1+deb11u5_all.deb ... , Unpacking tzdata (2021a-1+deb11u5) over (2021a-1+deb11u4) ... , Preparing to unpack .../01-libc-l10n_2.31-13+deb11u4_all.deb ... , Unpacking libc-l10n (2.31-13+deb11u4) over (2.31-13+deb11u3) ... , Preparing to unpack .../02-locales_2.31-13+deb11u4_all.deb ... , Unpacking locales (2.31-13+deb11u4) over (2.31-13+deb11u3) ... , Preparing to unpack .../03-curl_7.74.0-1.3+deb11u3_amd64.deb ... , Unpacking curl (7.74.0-1.3+deb11u3) over (7.74.0-1.3+deb11u1) ... , Preparing to unpack .../04-libcurl4_7.74.0-1.3+deb11u3_amd64.deb ... , Unpacking libcurl4:amd64 (7.74.0-1.3+deb11u3) over (7.74.0-1.3+deb11u1) ... , Preparing to unpack .../05-distro-info-data_0.51+deb11u2_all.deb ... , Unpacking distro-info-data (0.51+deb11u2) over (0.51+deb11u1) ... , Preparing to unpack .../06-dpkg-dev_1.20.12_all.deb ... , Unpacking dpkg-dev (1.20.12) over (1.20.10) ... , Preparing to unpack .../07-libdpkg-perl_1.20.12_all.deb ... , Unpacking libdpkg-perl (1.20.12) over (1.20.10) ... , Preparing to unpack .../08-libgdk-pixbuf-2.0-dev_2.42.2+dfsg-1+deb11u1_amd64.deb ... , Unpacking libgdk-pixbuf-2.0-dev:amd64 (2.42.2+dfsg-1+deb11u1) over (2.42.2+dfsg-1) ... , Preparing to unpack .../09-libgdk-pixbuf-2.0-0_2.42.2+dfsg-1+deb11u1_amd64.deb ... , Unpacking libgdk-pixbuf-2.0-0:amd64 (2.42.2+dfsg-1+deb11u1) over (2.42.2+dfsg-1) ... , Preparing to unpack .../10-libgdk-pixbuf2.0-common_2.42.2+dfsg-1+deb11u1_all.deb ... , Unpacking libgdk-pixbuf2.0-common (2.42.2+dfsg-1+deb11u1) over (2.42.2+dfsg-1) ... , Preparing to unpack .../11-libgdk-pixbuf2.0-bin_2.42.2+dfsg-1+deb11u1_amd64.deb ... , Unpacking libgdk-pixbuf2.0-bin (2.42.2+dfsg-1+deb11u1) over (2.42.2+dfsg-1) ... , Preparing to unpack .../12-gir1.2-gdkpixbuf-2.0_2.42.2+dfsg-1+deb11u1_amd64.deb ... , Unpacking gir1.2-gdkpixbuf-2.0:amd64 (2.42.2+dfsg-1+deb11u1) over (2.42.2+dfsg-1) ... , Preparing to unpack .../13-libavahi-compat-libdnssd-dev_0.8-5+deb11u1_amd64.deb ... , Unpacking libavahi-compat-libdnssd-dev:amd64 (0.8-5+deb11u1) over (0.8-5) ... , Preparing to unpack .../14-libavahi-client-dev_0.8-5+deb11u1_amd64.deb ... , Unpacking libavahi-client-dev:amd64 (0.8-5+deb11u1) over (0.8-5) ... , Preparing to unpack .../15-libavahi-common-dev_0.8-5+deb11u1_amd64.deb ... , Unpacking libavahi-common-dev:amd64 (0.8-5+deb11u1) over (0.8-5) ... , Preparing to unpack .../16-libavahi-compat-libdnssd1_0.8-5+deb11u1_amd64.deb ... , Unpacking libavahi-compat-libdnssd1:amd64 (0.8-5+deb11u1) over (0.8-5) ... , Preparing to unpack .../17-libavahi-client3_0.8-5+deb11u1_amd64.deb ... , Unpacking libavahi-client3:amd64 (0.8-5+deb11u1) over (0.8-5) ... , Preparing to unpack .../18-libavahi-common3_0.8-5+deb11u1_amd64.deb ... , Unpacking libavahi-common3:amd64 (0.8-5+deb11u1) over (0.8-5) ... , Preparing to unpack .../19-libavahi-common-data_0.8-5+deb11u1_amd64.deb ... , Unpacking libavahi-common-data:amd64 (0.8-5+deb11u1) over (0.8-5) ... , Preparing to unpack .../20-libcurl3-gnutls_7.74.0-1.3+deb11u3_amd64.deb ... , Unpacking libcurl3-gnutls:amd64 (7.74.0-1.3+deb11u3) over (7.74.0-1.3+deb11u1) ... , Preparing to unpack .../21-libfreetype-dev_2.10.4+dfsg-1+deb11u1_amd64.deb ... , Unpacking libfreetype-dev:amd64 (2.10.4+dfsg-1+deb11u1) over (2.10.4+dfsg-1) ... , Preparing to unpack .../22-libfreetype6-dev_2.10.4+dfsg-1+deb11u1_amd64.deb ... , Unpacking libfreetype6-dev:amd64 (2.10.4+dfsg-1+deb11u1) over (2.10.4+dfsg-1) ... , Preparing to unpack .../23-libfreetype6_2.10.4+dfsg-1+deb11u1_amd64.deb ... , Unpacking libfreetype6:amd64 (2.10.4+dfsg-1+deb11u1) over (2.10.4+dfsg-1) ... , Preparing to unpack .../24-libfribidi-dev_1.0.8-2+deb11u1_amd64.deb ... , Unpacking libfribidi-dev:amd64 (1.0.8-2+deb11u1) over (1.0.8-2) ... , Preparing to unpack .../25-libfribidi0_1.0.8-2+deb11u1_amd64.deb ... , Unpacking libfribidi0:amd64 (1.0.8-2+deb11u1) over (1.0.8-2) ... , Preparing to unpack .../26-nodejs_16.17.0-deb-1nodesource1_amd64.deb ... , Unpacking nodejs (16.17.0-deb-1nodesource1) over (16.15.1-deb-1nodesource1) ... , Preparing to unpack .../27-publicsuffix_20220811.1734-0+deb11u1_all.deb ... , Unpacking publicsuffix (20220811.1734-0+deb11u1) over (20211207.1025-0+deb11u1) ... , Preparing to unpack .../28-unzip_6.0-26+deb11u1_amd64.deb ... , Unpacking unzip (6.0-26+deb11u1) over (6.0-26) ... , Setting up libc-l10n (2.31-13+deb11u4) ... , Setting up distro-info-data (0.51+deb11u2) ... , Setting up unzip (6.0-26+deb11u1) ... , Setting up libgdk-pixbuf2.0-common (2.42.2+dfsg-1+deb11u1) ... , Setting up linux-libc-dev:amd64 (5.10.140-1) ... , Setting up libcurl3-gnutls:amd64 (7.74.0-1.3+deb11u3) ... , Setting up locales (2.31-13+deb11u4) ... , Generating locales (this might take a while)... , de_DE.UTF-8... done , en_US.UTF-8... done , Generation complete. , Setting up nodejs (16.17.0-deb-1nodesource1) ... , Setting up libwbclient0:amd64 (2:4.13.13+dfsg-1~deb11u5) ... , Setting up libpcre2-16-0:amd64 (10.36-2+deb11u1) ... , Setting up tzdata (2021a-1+deb11u5) ... , , Current default time zone: 'Etc/UTC' , Local time is now: Tue Sep 20 08:24:52 UTC 2022. , Universal Time is now: Tue Sep 20 08:24:52 UTC 2022. , Run 'dpkg-reconfigure tzdata' if you wish to change it. , , Setting up libpcre2-32-0:amd64 (10.36-2+deb11u1) ... , Setting up libtirpc-dev:amd64 (1.3.1-1+deb11u1) ... , Setting up libfreetype6:amd64 (2.10.4+dfsg-1+deb11u1) ... , Setting up libavahi-common-data:amd64 (0.8-5+deb11u1) ... , Setting up libfribidi0:amd64 (1.0.8-2+deb11u1) ... , Setting up udev (247.3-7+deb11u1) ... , invoke-rc.d: could not determine current runlevel , invoke-rc.d: policy-rc.d denied execution of restart. , Setting up libudev-dev:amd64 (247.3-7+deb11u1) ... , Setting up libpcre2-posix2:amd64 (10.36-2+deb11u1) ... , Setting up libdpkg-perl (1.20.12) ... , Setting up libcurl4:amd64 (7.74.0-1.3+deb11u3) ... , Setting up libgdk-pixbuf-2.0-0:amd64 (2.42.2+dfsg-1+deb11u1) ... , Setting up curl (7.74.0-1.3+deb11u3) ... , Setting up libc-dev-bin (2.31-13+deb11u4) ... , Setting up publicsuffix (20220811.1734-0+deb11u1) ... , Setting up libc-devtools (2.31-13+deb11u4) ... , Setting up gir1.2-gdkpixbuf-2.0:amd64 (2.42.2+dfsg-1+deb11u1) ... , Setting up libfribidi-dev:amd64 (1.0.8-2+deb11u1) ... , Setting up libavahi-common3:amd64 (0.8-5+deb11u1) ... , Setting up dpkg-dev (1.20.12) ... , Setting up libgdk-pixbuf2.0-bin (2.42.2+dfsg-1+deb11u1) ... , Setting up libavahi-common-dev:amd64 (0.8-5+deb11u1) ... , Setting up libc6-dev:amd64 (2.31-13+deb11u4) ... , Setting up libavahi-client3:amd64 (0.8-5+deb11u1) ... , Setting up libgdk-pixbuf-2.0-dev:amd64 (2.42.2+dfsg-1+deb11u1) ... , Setting up libpcre2-dev:amd64 (10.36-2+deb11u1) ... , Setting up libavahi-client-dev:amd64 (0.8-5+deb11u1) ... , Setting up libavahi-compat-libdnssd1:amd64 (0.8-5+deb11u1) ... , Setting up zlib1g-dev:amd64 (1:1.2.11.dfsg-2+deb11u2) ... , Setting up libavahi-compat-libdnssd-dev:amd64 (0.8-5+deb11u1) ... , Setting up libfreetype-dev:amd64 (2.10.4+dfsg-1+deb11u1) ... , Setting up libfreetype6-dev:amd64 (2.10.4+dfsg-1+deb11u1) ... , Processing triggers for libc-bin (2.31-13+deb11u4) ... , Reading package lists..., Building dependency tree..., Reading state information..., Reading package lists..., Building dependency tree..., Reading state information..., 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded., Done., , Registering maintenance script as command... Done., , Installing additional packages is set by ENV., Checking the following Packages: ..., Reading package lists..., Building dependency tree..., Reading state information..., Reading package lists..., Building dependency tree..., Reading state information..., 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded., Done., , --------------------------------------------------------------------------------, ----- Step 2 of 5: Detecting ioBroker installation -----, --------------------------------------------------------------------------------, , Existing installation of ioBroker detected in /opt/iobroker., , --------------------------------------------------------------------------------, ----- Step 3 of 5: Checking ioBroker installation -----, --------------------------------------------------------------------------------, , (Re)Setting folder permissions (This might take a while! Please be patient!)... Done., , sed: couldn't open temporary file /opt/iobroker/sedQa9wjy: No space left on device, Fixing "sudo-bug" by replacing sudo in iobroker with gosu... Done., , /opt/scripts/iobroker_startup.sh: line 212: [: !=: unary operator expected, --------------------------------------------------------------------------------, ----- Step 4 of 5: Applying special settings -----, --------------------------------------------------------------------------------, , Some adapters have special requirements/ settings which can be activated by the use of environment variables., For more information see ioBroker Docker Image Docs (https://docs.buanet.de/iobroker-docker-image/docs/)., , Usb-device-support is activated by ENV., Setting permissions for /dev/serial/by-id/zigbee... Done., , --------------------------------------------------------------------------------, ----- Step 5 of 5: ioBroker startup -----, --------------------------------------------------------------------------------, , Starting ioBroker..., , ENOSPC: no space left on device, open '/opt/iobroker/log/iobroker.2022-09-20.log', Error: ENOSPC: no space left on device, open '/opt/iobroker/log/iobroker.2022-09-20.log', -
habe jetzt den Continer gelöscht und neu erstellt:
Jetzt kommt ein anderes File nicht mehr das was du mich gefragt hattest., --------------------------------------------------------------------------------, ------------------------- 2022-09-20 10:24:08 -------------------------, --------------------------------------------------------------------------------, , --------------------------------------------------------------------------------, ----- Welcome to your ioBroker-container! -----, ----- Startupscript is now running. -----, ----- Please be patient! -----, --------------------------------------------------------------------------------, , --------------------------------------------------------------------------------, ----- Debugging information -----, ----- -----, ----- System -----, ----- arch: x86_64 -----, ----- hostname: 495a20f2fe4b -----, ----- -----, ----- Docker-Image -----, ----- image: v7.0.1 -----, ----- build: 2022-07-05T18:51:52+00:00 -----, ----- -----, ----- Versions -----, ----- node: v16.15.1 -----, ----- npm: 8.11.0 -----, ----- -----, ----- ENV -----, ----- SETGID: 1000 -----, ----- SETUID: 1000 -----, ----- USBDEVICES: /dev/serial/by-id/zigbee -----, --------------------------------------------------------------------------------, , --------------------------------------------------------------------------------, ----- Step 1 of 5: Preparing container -----, --------------------------------------------------------------------------------, , Updating Linux packages on first run..., dpkg-preconfigure: unable to re-open stdin: , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../base-files_11.1+deb11u5_amd64.deb ... , Unpacking base-files (11.1+deb11u5) over (11.1+deb11u3) ... , Setting up base-files (11.1+deb11u5) ... , Installing new version of config file /etc/debian_version ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../bash_5.1-2+deb11u1_amd64.deb ... , update-alternatives: warning: alternative /usr/share/man/man7/bash-builtins.7.gz (part of link group builtins.7.gz) doesn't exist; removing from list of alternatives , update-alternatives: warning: /etc/alternatives/builtins.7.gz is dangling; it will be updated with best choice , Unpacking bash (5.1-2+deb11u1) over (5.1-2+b3) ... , Setting up bash (5.1-2+deb11u1) ... , update-alternatives: error: alternative path /usr/share/man/man7/bash-builtins.7.gz doesn't exist , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29333 files and directories currently installed.) , Preparing to unpack .../dpkg_1.20.12_amd64.deb ... , Unpacking dpkg (1.20.12) over (1.20.10) ... , Setting up dpkg (1.20.12) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29333 files and directories currently installed.) , Preparing to unpack .../libc-devtools_2.31-13+deb11u4_amd64.deb ... , Unpacking libc-devtools (2.31-13+deb11u4) over (2.31-13+deb11u3) ... , Preparing to unpack .../libc6-dev_2.31-13+deb11u4_amd64.deb ... , Unpacking libc6-dev:amd64 (2.31-13+deb11u4) over (2.31-13+deb11u3) ... , Preparing to unpack .../libc-dev-bin_2.31-13+deb11u4_amd64.deb ... , Unpacking libc-dev-bin (2.31-13+deb11u4) over (2.31-13+deb11u3) ... , Preparing to unpack .../linux-libc-dev_5.10.140-1_amd64.deb ... , Unpacking linux-libc-dev:amd64 (5.10.140-1) over (5.10.120-1) ... , Preparing to unpack .../libc6_2.31-13+deb11u4_amd64.deb ... , Unpacking libc6:amd64 (2.31-13+deb11u4) over (2.31-13+deb11u3) ... , Setting up libc6:amd64 (2.31-13+deb11u4) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../libc-bin_2.31-13+deb11u4_amd64.deb ... , Unpacking libc-bin (2.31-13+deb11u4) over (2.31-13+deb11u3) ... , Setting up libc-bin (2.31-13+deb11u4) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../libsystemd0_247.3-7+deb11u1_amd64.deb ... , Unpacking libsystemd0:amd64 (247.3-7+deb11u1) over (247.3-7) ... , Setting up libsystemd0:amd64 (247.3-7+deb11u1) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../libgnutls30_3.7.1-5+deb11u2_amd64.deb ... , Unpacking libgnutls30:amd64 (3.7.1-5+deb11u2) over (3.7.1-5) ... , Setting up libgnutls30:amd64 (3.7.1-5+deb11u2) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../libwbclient0_2%3a4.13.13+dfsg-1~deb11u5_amd64.deb ... , Unpacking libwbclient0:amd64 (2:4.13.13+dfsg-1~deb11u5) over (2:4.13.13+dfsg-1~deb11u3) ... , Preparing to unpack .../libk5crypto3_1.18.3-6+deb11u2_amd64.deb ... , Unpacking libk5crypto3:amd64 (1.18.3-6+deb11u2) over (1.18.3-6+deb11u1) ... , Setting up libk5crypto3:amd64 (1.18.3-6+deb11u2) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../libkrb5support0_1.18.3-6+deb11u2_amd64.deb ... , Unpacking libkrb5support0:amd64 (1.18.3-6+deb11u2) over (1.18.3-6+deb11u1) ... , Setting up libkrb5support0:amd64 (1.18.3-6+deb11u2) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../libkrb5-3_1.18.3-6+deb11u2_amd64.deb ... , Unpacking libkrb5-3:amd64 (1.18.3-6+deb11u2) over (1.18.3-6+deb11u1) ... , Setting up libkrb5-3:amd64 (1.18.3-6+deb11u2) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../libgssapi-krb5-2_1.18.3-6+deb11u2_amd64.deb ... , Unpacking libgssapi-krb5-2:amd64 (1.18.3-6+deb11u2) over (1.18.3-6+deb11u1) ... , Setting up libgssapi-krb5-2:amd64 (1.18.3-6+deb11u2) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../libssl1.1_1.1.1n-0+deb11u3_amd64.deb ... , Unpacking libssl1.1:amd64 (1.1.1n-0+deb11u3) over (1.1.1n-0+deb11u2) ... , Setting up libssl1.1:amd64 (1.1.1n-0+deb11u3) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../libpcre2-dev_10.36-2+deb11u1_amd64.deb ... , Unpacking libpcre2-dev:amd64 (10.36-2+deb11u1) over (10.36-2) ... , Preparing to unpack .../libpcre2-16-0_10.36-2+deb11u1_amd64.deb ... , Unpacking libpcre2-16-0:amd64 (10.36-2+deb11u1) over (10.36-2) ... , Preparing to unpack .../libpcre2-32-0_10.36-2+deb11u1_amd64.deb ... , Unpacking libpcre2-32-0:amd64 (10.36-2+deb11u1) over (10.36-2) ... , Preparing to unpack .../libpcre2-posix2_10.36-2+deb11u1_amd64.deb ... , Unpacking libpcre2-posix2:amd64 (10.36-2+deb11u1) over (10.36-2) ... , Preparing to unpack .../libpcre2-8-0_10.36-2+deb11u1_amd64.deb ... , Unpacking libpcre2-8-0:amd64 (10.36-2+deb11u1) over (10.36-2) ... , Setting up libpcre2-8-0:amd64 (10.36-2+deb11u1) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../libtirpc-common_1.3.1-1+deb11u1_all.deb ... , Unpacking libtirpc-common (1.3.1-1+deb11u1) over (1.3.1-1) ... , Setting up libtirpc-common (1.3.1-1+deb11u1) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../libtirpc-dev_1.3.1-1+deb11u1_amd64.deb ... , Unpacking libtirpc-dev:amd64 (1.3.1-1+deb11u1) over (1.3.1-1) ... , Preparing to unpack .../libtirpc3_1.3.1-1+deb11u1_amd64.deb ... , Unpacking libtirpc3:amd64 (1.3.1-1+deb11u1) over (1.3.1-1) ... , Setting up libtirpc3:amd64 (1.3.1-1+deb11u1) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../libudev-dev_247.3-7+deb11u1_amd64.deb ... , Unpacking libudev-dev:amd64 (247.3-7+deb11u1) over (247.3-7) ... , Preparing to unpack .../udev_247.3-7+deb11u1_amd64.deb ... , Unpacking udev (247.3-7+deb11u1) over (247.3-7) ... , Preparing to unpack .../libudev1_247.3-7+deb11u1_amd64.deb ... , Unpacking libudev1:amd64 (247.3-7+deb11u1) over (247.3-7) ... , Setting up libudev1:amd64 (247.3-7+deb11u1) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../zlib1g-dev_1%3a1.2.11.dfsg-2+deb11u2_amd64.deb ... , Unpacking zlib1g-dev:amd64 (1:1.2.11.dfsg-2+deb11u2) over (1:1.2.11.dfsg-2+deb11u1) ... , Preparing to unpack .../zlib1g_1%3a1.2.11.dfsg-2+deb11u2_amd64.deb ... , Unpacking zlib1g:amd64 (1:1.2.11.dfsg-2+deb11u2) over (1:1.2.11.dfsg-2+deb11u1) ... , Setting up zlib1g:amd64 (1:1.2.11.dfsg-2+deb11u2) ... , (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 29334 files and directories currently installed.) , Preparing to unpack .../00-tzdata_2021a-1+deb11u5_all.deb ... , Unpacking tzdata (2021a-1+deb11u5) over (2021a-1+deb11u4) ... , Preparing to unpack .../01-libc-l10n_2.31-13+deb11u4_all.deb ... , Unpacking libc-l10n (2.31-13+deb11u4) over (2.31-13+deb11u3) ... , Preparing to unpack .../02-locales_2.31-13+deb11u4_all.deb ... , Unpacking locales (2.31-13+deb11u4) over (2.31-13+deb11u3) ... , Preparing to unpack .../03-curl_7.74.0-1.3+deb11u3_amd64.deb ... , Unpacking curl (7.74.0-1.3+deb11u3) over (7.74.0-1.3+deb11u1) ... , Preparing to unpack .../04-libcurl4_7.74.0-1.3+deb11u3_amd64.deb ... , Unpacking libcurl4:amd64 (7.74.0-1.3+deb11u3) over (7.74.0-1.3+deb11u1) ... , Preparing to unpack .../05-distro-info-data_0.51+deb11u2_all.deb ... , Unpacking distro-info-data (0.51+deb11u2) over (0.51+deb11u1) ... , Preparing to unpack .../06-dpkg-dev_1.20.12_all.deb ... , Unpacking dpkg-dev (1.20.12) over (1.20.10) ... , Preparing to unpack .../07-libdpkg-perl_1.20.12_all.deb ... , Unpacking libdpkg-perl (1.20.12) over (1.20.10) ... , Preparing to unpack .../08-libgdk-pixbuf-2.0-dev_2.42.2+dfsg-1+deb11u1_amd64.deb ... , Unpacking libgdk-pixbuf-2.0-dev:amd64 (2.42.2+dfsg-1+deb11u1) over (2.42.2+dfsg-1) ... , Preparing to unpack .../09-libgdk-pixbuf-2.0-0_2.42.2+dfsg-1+deb11u1_amd64.deb ... , Unpacking libgdk-pixbuf-2.0-0:amd64 (2.42.2+dfsg-1+deb11u1) over (2.42.2+dfsg-1) ... , Preparing to unpack .../10-libgdk-pixbuf2.0-common_2.42.2+dfsg-1+deb11u1_all.deb ... , Unpacking libgdk-pixbuf2.0-common (2.42.2+dfsg-1+deb11u1) over (2.42.2+dfsg-1) ... , Preparing to unpack .../11-libgdk-pixbuf2.0-bin_2.42.2+dfsg-1+deb11u1_amd64.deb ... , Unpacking libgdk-pixbuf2.0-bin (2.42.2+dfsg-1+deb11u1) over (2.42.2+dfsg-1) ... , Preparing to unpack .../12-gir1.2-gdkpixbuf-2.0_2.42.2+dfsg-1+deb11u1_amd64.deb ... , Unpacking gir1.2-gdkpixbuf-2.0:amd64 (2.42.2+dfsg-1+deb11u1) over (2.42.2+dfsg-1) ... , Preparing to unpack .../13-libavahi-compat-libdnssd-dev_0.8-5+deb11u1_amd64.deb ... , Unpacking libavahi-compat-libdnssd-dev:amd64 (0.8-5+deb11u1) over (0.8-5) ... , Preparing to unpack .../14-libavahi-client-dev_0.8-5+deb11u1_amd64.deb ... , Unpacking libavahi-client-dev:amd64 (0.8-5+deb11u1) over (0.8-5) ... , Preparing to unpack .../15-libavahi-common-dev_0.8-5+deb11u1_amd64.deb ... , Unpacking libavahi-common-dev:amd64 (0.8-5+deb11u1) over (0.8-5) ... , Preparing to unpack .../16-libavahi-compat-libdnssd1_0.8-5+deb11u1_amd64.deb ... , Unpacking libavahi-compat-libdnssd1:amd64 (0.8-5+deb11u1) over (0.8-5) ... , Preparing to unpack .../17-libavahi-client3_0.8-5+deb11u1_amd64.deb ... , Unpacking libavahi-client3:amd64 (0.8-5+deb11u1) over (0.8-5) ... , Preparing to unpack .../18-libavahi-common3_0.8-5+deb11u1_amd64.deb ... , Unpacking libavahi-common3:amd64 (0.8-5+deb11u1) over (0.8-5) ... , Preparing to unpack .../19-libavahi-common-data_0.8-5+deb11u1_amd64.deb ... , Unpacking libavahi-common-data:amd64 (0.8-5+deb11u1) over (0.8-5) ... , Preparing to unpack .../20-libcurl3-gnutls_7.74.0-1.3+deb11u3_amd64.deb ... , Unpacking libcurl3-gnutls:amd64 (7.74.0-1.3+deb11u3) over (7.74.0-1.3+deb11u1) ... , Preparing to unpack .../21-libfreetype-dev_2.10.4+dfsg-1+deb11u1_amd64.deb ... , Unpacking libfreetype-dev:amd64 (2.10.4+dfsg-1+deb11u1) over (2.10.4+dfsg-1) ... , Preparing to unpack .../22-libfreetype6-dev_2.10.4+dfsg-1+deb11u1_amd64.deb ... , Unpacking libfreetype6-dev:amd64 (2.10.4+dfsg-1+deb11u1) over (2.10.4+dfsg-1) ... , Preparing to unpack .../23-libfreetype6_2.10.4+dfsg-1+deb11u1_amd64.deb ... , Unpacking libfreetype6:amd64 (2.10.4+dfsg-1+deb11u1) over (2.10.4+dfsg-1) ... , Preparing to unpack .../24-libfribidi-dev_1.0.8-2+deb11u1_amd64.deb ... , Unpacking libfribidi-dev:amd64 (1.0.8-2+deb11u1) over (1.0.8-2) ... , Preparing to unpack .../25-libfribidi0_1.0.8-2+deb11u1_amd64.deb ... , Unpacking libfribidi0:amd64 (1.0.8-2+deb11u1) over (1.0.8-2) ... , Preparing to unpack .../26-nodejs_16.17.0-deb-1nodesource1_amd64.deb ... , Unpacking nodejs (16.17.0-deb-1nodesource1) over (16.15.1-deb-1nodesource1) ... , Preparing to unpack .../27-publicsuffix_20220811.1734-0+deb11u1_all.deb ... , Unpacking publicsuffix (20220811.1734-0+deb11u1) over (20211207.1025-0+deb11u1) ... , Preparing to unpack .../28-unzip_6.0-26+deb11u1_amd64.deb ... , Unpacking unzip (6.0-26+deb11u1) over (6.0-26) ... , Setting up libc-l10n (2.31-13+deb11u4) ... , Setting up distro-info-data (0.51+deb11u2) ... , Setting up unzip (6.0-26+deb11u1) ... , Setting up libgdk-pixbuf2.0-common (2.42.2+dfsg-1+deb11u1) ... , Setting up linux-libc-dev:amd64 (5.10.140-1) ... , Setting up libcurl3-gnutls:amd64 (7.74.0-1.3+deb11u3) ... , Setting up locales (2.31-13+deb11u4) ... , Generating locales (this might take a while)... , de_DE.UTF-8... done , en_US.UTF-8... done , Generation complete. , Setting up nodejs (16.17.0-deb-1nodesource1) ... , Setting up libwbclient0:amd64 (2:4.13.13+dfsg-1~deb11u5) ... , Setting up libpcre2-16-0:amd64 (10.36-2+deb11u1) ... , Setting up tzdata (2021a-1+deb11u5) ... , , Current default time zone: 'Etc/UTC' , Local time is now: Tue Sep 20 08:24:52 UTC 2022. , Universal Time is now: Tue Sep 20 08:24:52 UTC 2022. , Run 'dpkg-reconfigure tzdata' if you wish to change it. , , Setting up libpcre2-32-0:amd64 (10.36-2+deb11u1) ... , Setting up libtirpc-dev:amd64 (1.3.1-1+deb11u1) ... , Setting up libfreetype6:amd64 (2.10.4+dfsg-1+deb11u1) ... , Setting up libavahi-common-data:amd64 (0.8-5+deb11u1) ... , Setting up libfribidi0:amd64 (1.0.8-2+deb11u1) ... , Setting up udev (247.3-7+deb11u1) ... , invoke-rc.d: could not determine current runlevel , invoke-rc.d: policy-rc.d denied execution of restart. , Setting up libudev-dev:amd64 (247.3-7+deb11u1) ... , Setting up libpcre2-posix2:amd64 (10.36-2+deb11u1) ... , Setting up libdpkg-perl (1.20.12) ... , Setting up libcurl4:amd64 (7.74.0-1.3+deb11u3) ... , Setting up libgdk-pixbuf-2.0-0:amd64 (2.42.2+dfsg-1+deb11u1) ... , Setting up curl (7.74.0-1.3+deb11u3) ... , Setting up libc-dev-bin (2.31-13+deb11u4) ... , Setting up publicsuffix (20220811.1734-0+deb11u1) ... , Setting up libc-devtools (2.31-13+deb11u4) ... , Setting up gir1.2-gdkpixbuf-2.0:amd64 (2.42.2+dfsg-1+deb11u1) ... , Setting up libfribidi-dev:amd64 (1.0.8-2+deb11u1) ... , Setting up libavahi-common3:amd64 (0.8-5+deb11u1) ... , Setting up dpkg-dev (1.20.12) ... , Setting up libgdk-pixbuf2.0-bin (2.42.2+dfsg-1+deb11u1) ... , Setting up libavahi-common-dev:amd64 (0.8-5+deb11u1) ... , Setting up libc6-dev:amd64 (2.31-13+deb11u4) ... , Setting up libavahi-client3:amd64 (0.8-5+deb11u1) ... , Setting up libgdk-pixbuf-2.0-dev:amd64 (2.42.2+dfsg-1+deb11u1) ... , Setting up libpcre2-dev:amd64 (10.36-2+deb11u1) ... , Setting up libavahi-client-dev:amd64 (0.8-5+deb11u1) ... , Setting up libavahi-compat-libdnssd1:amd64 (0.8-5+deb11u1) ... , Setting up zlib1g-dev:amd64 (1:1.2.11.dfsg-2+deb11u2) ... , Setting up libavahi-compat-libdnssd-dev:amd64 (0.8-5+deb11u1) ... , Setting up libfreetype-dev:amd64 (2.10.4+dfsg-1+deb11u1) ... , Setting up libfreetype6-dev:amd64 (2.10.4+dfsg-1+deb11u1) ... , Processing triggers for libc-bin (2.31-13+deb11u4) ... , Reading package lists..., Building dependency tree..., Reading state information..., Reading package lists..., Building dependency tree..., Reading state information..., 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded., Done., , Registering maintenance script as command... Done., , Installing additional packages is set by ENV., Checking the following Packages: ..., Reading package lists..., Building dependency tree..., Reading state information..., Reading package lists..., Building dependency tree..., Reading state information..., 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded., Done., , --------------------------------------------------------------------------------, ----- Step 2 of 5: Detecting ioBroker installation -----, --------------------------------------------------------------------------------, , Existing installation of ioBroker detected in /opt/iobroker., , --------------------------------------------------------------------------------, ----- Step 3 of 5: Checking ioBroker installation -----, --------------------------------------------------------------------------------, , (Re)Setting folder permissions (This might take a while! Please be patient!)... Done., , sed: couldn't open temporary file /opt/iobroker/sedQa9wjy: No space left on device, Fixing "sudo-bug" by replacing sudo in iobroker with gosu... Done., , /opt/scripts/iobroker_startup.sh: line 212: [: !=: unary operator expected, --------------------------------------------------------------------------------, ----- Step 4 of 5: Applying special settings -----, --------------------------------------------------------------------------------, , Some adapters have special requirements/ settings which can be activated by the use of environment variables., For more information see ioBroker Docker Image Docs (https://docs.buanet.de/iobroker-docker-image/docs/)., , Usb-device-support is activated by ENV., Setting permissions for /dev/serial/by-id/zigbee... Done., , --------------------------------------------------------------------------------, ----- Step 5 of 5: ioBroker startup -----, --------------------------------------------------------------------------------, , Starting ioBroker..., , ENOSPC: no space left on device, open '/opt/iobroker/log/iobroker.2022-09-20.log', Error: ENOSPC: no space left on device, open '/opt/iobroker/log/iobroker.2022-09-20.log',Existing installation of ioBroker detected in /opt/iobroker.,
Schalte diese Container aus ,
erstelle einen neuen Container mit dem Image ( ohne einen Mount ) und starte Ihn .
Quasi einen neuen ioBroker ..... läuft er durch ohne Fehler !? -
Existing installation of ioBroker detected in /opt/iobroker.,
Schalte diese Container aus ,
erstelle einen neuen Container mit dem Image ( ohne einen Mount ) und starte Ihn .
Quasi einen neuen ioBroker ..... läuft er durch ohne Fehler !?ja da erstellt er ihn ohne Probleme, aber ist natürlich eine neue leere installation dann ohne meine alten Daten.
-
ja da erstellt er ihn ohne Probleme, aber ist natürlich eine neue leere installation dann ohne meine alten Daten.
@stubennatter sagte in Error: ENOSPC: no space left on device, write:
ja da erstellt er ihn ohne Probleme, aber ist natürlich eine neue leere installation dann ohne meine alten Daten.
dann ein aktuelles Backup rein mit BackitUp. , eine andere möglichkeit sehe ich gerade nicht .
habe aber gestern Platz frei gemacht auf dem Laufwerk und habe seither diesen Fehler.
da wirst du wohl etwas zuviel gelöscht haben ...
-
@stubennatter sagte in Error: ENOSPC: no space left on device, write:
ja da erstellt er ihn ohne Probleme, aber ist natürlich eine neue leere installation dann ohne meine alten Daten.
dann ein aktuelles Backup rein mit BackitUp. , eine andere möglichkeit sehe ich gerade nicht .
habe aber gestern Platz frei gemacht auf dem Laufwerk und habe seither diesen Fehler.
da wirst du wohl etwas zuviel gelöscht haben ...
@glasfaser
Danke für deine Hilfe.
Hab ich gemacht, aber fast keine der Instanzen läuft dann nach dem einlesen des Backups, das sind nur ganz wenige die laufen. Auch sind dann die Info Tab und auch der Skript Tab nicht aufrufbar, dort kommt eine leere seite mit error .html -
@glasfaser
Danke für deine Hilfe.
Hab ich gemacht, aber fast keine der Instanzen läuft dann nach dem einlesen des Backups, das sind nur ganz wenige die laufen. Auch sind dann die Info Tab und auch der Skript Tab nicht aufrufbar, dort kommt eine leere seite mit error .html@stubennatter sagte in Error: ENOSPC: no space left on device, write:
aber fast keine der Instanzen läuft dann nach dem einlesen des Backups,
Bitte nicht´s machen ... einfach nur warten .
Sie werden alle nachinstalliert .... das kann dauern . -
@stubennatter sagte in Error: ENOSPC: no space left on device, write:
aber fast keine der Instanzen läuft dann nach dem einlesen des Backups,
Bitte nicht´s machen ... einfach nur warten .
Sie werden alle nachinstalliert .... das kann dauern .@glasfaser hm laut log macht er nix mehr und es werden keine adapter gestartet, wenn ich einen starte steht im log das er gleich wieder beendet wurde
-
@glasfaser hm laut log macht er nix mehr und es werden keine adapter gestartet, wenn ich einen starte steht im log das er gleich wieder beendet wurde
Werden denn alle Adapter in der Instanz angezeigt die du schon vorher hattest ...
Ein Log wäre hilfreich , was er gerade macht
-
ja werden alle angezeigt, aber keiner ist gestartet, hatte beim ersten Start Probleme mit der Vis installation, hing da in einer Schleife und habe daher Version 1.4.15 per hand installiert und dann lief das backup durch und als log
host.iob 2022-09-20 14:51:58.451 info instance system.adapter.vis.0 terminated while should be started once vis.0 2022-09-20 14:51:57.822 info Terminated (NO_ERROR): Without reason vis.0 2022-09-20 14:51:52.020 info vis license is OK. vis.0 2022-09-20 14:51:51.862 info starting. Version 1.4.15 in /opt/iobroker/node_modules/iobroker.vis, node: v16.17.0, js-controller: 4.0.23 vis.0 2022-09-20 14:51:51.626 info Sets unsupported -
ja werden alle angezeigt, aber keiner ist gestartet, hatte beim ersten Start Probleme mit der Vis installation, hing da in einer Schleife und habe daher Version 1.4.15 per hand installiert und dann lief das backup durch und als log
host.iob 2022-09-20 14:51:58.451 info instance system.adapter.vis.0 terminated while should be started once vis.0 2022-09-20 14:51:57.822 info Terminated (NO_ERROR): Without reason vis.0 2022-09-20 14:51:52.020 info vis license is OK. vis.0 2022-09-20 14:51:51.862 info starting. Version 1.4.15 in /opt/iobroker/node_modules/iobroker.vis, node: v16.17.0, js-controller: 4.0.23 vis.0 2022-09-20 14:51:51.626 info Sets unsupported@stubennatter sagte in Error: ENOSPC: no space left on device, write:
hing da in einer Schleife und habe daher Version 1.4.15 per hand installiert
und wie ... !???
ich hoffe mit ...kleinere Version
iobroker install vis@1.4.0und dann ein Upgrade auf 1.4.15 gemacht
-
@stubennatter sagte in Error: ENOSPC: no space left on device, write:
hing da in einer Schleife und habe daher Version 1.4.15 per hand installiert
und wie ... !???
ich hoffe mit ...kleinere Version
iobroker install vis@1.4.0und dann ein Upgrade auf 1.4.15 gemacht
@glasfaser
genau mit 1.4.0 -
ja werden alle angezeigt, aber keiner ist gestartet, hatte beim ersten Start Probleme mit der Vis installation, hing da in einer Schleife und habe daher Version 1.4.15 per hand installiert und dann lief das backup durch und als log
host.iob 2022-09-20 14:51:58.451 info instance system.adapter.vis.0 terminated while should be started once vis.0 2022-09-20 14:51:57.822 info Terminated (NO_ERROR): Without reason vis.0 2022-09-20 14:51:52.020 info vis license is OK. vis.0 2022-09-20 14:51:51.862 info starting. Version 1.4.15 in /opt/iobroker/node_modules/iobroker.vis, node: v16.17.0, js-controller: 4.0.23 vis.0 2022-09-20 14:51:51.626 info Sets unsupported@stubennatter sagte in Error: ENOSPC: no space left on device, write:
ja werden alle angezeigt, aber keiner ist gestartet,
wenn ich einen starte steht im log das er gleich wieder beendet wurde
Normal ist das nicht !!
mache mal ein
iobroker upload all -
ja werden alle angezeigt, aber keiner ist gestartet, hatte beim ersten Start Probleme mit der Vis installation, hing da in einer Schleife und habe daher Version 1.4.15 per hand installiert und dann lief das backup durch und als log
host.iob 2022-09-20 14:51:58.451 info instance system.adapter.vis.0 terminated while should be started once vis.0 2022-09-20 14:51:57.822 info Terminated (NO_ERROR): Without reason vis.0 2022-09-20 14:51:52.020 info vis license is OK. vis.0 2022-09-20 14:51:51.862 info starting. Version 1.4.15 in /opt/iobroker/node_modules/iobroker.vis, node: v16.17.0, js-controller: 4.0.23 vis.0 2022-09-20 14:51:51.626 info Sets unsupported@stubennatter sagte in Error: ENOSPC: no space left on device, write:
2022-09-20 14:51:51.626 info Sets unsupported
Hast du ein MultiHost !?
-
@stubennatter sagte in Error: ENOSPC: no space left on device, write:
ja werden alle angezeigt, aber keiner ist gestartet,
wenn ich einen starte steht im log das er gleich wieder beendet wurde
Normal ist das nicht !!
mache mal ein
iobroker upload allupload läuft gerade, wenn fertig dann Container neustarten?
604
Online32.4k
Benutzer81.6k
Themen1.3m
Beiträge