Skip to content
  • Home
  • Aktuell
  • Tags
  • 0 Ungelesen 0
  • Kategorien
  • Unreplied
  • Beliebt
  • GitHub
  • Docu
  • Hilfe
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Standard: (Kein Skin)
  • Kein Skin
Einklappen
ioBroker Logo

Community Forum

donate donate
  1. ioBroker Community Home
  2. Deutsch
  3. Einsteigerfragen
  4. Installation
  5. CCU3 und IOBroker (Synology Docker) Objekte Fehler

NEWS

  • Neuer Blogbeitrag: Monatsrückblick - Dezember 2025 🎄
    BluefoxB
    Bluefox
    11
    1
    523

  • Weihnachtsangebot 2025! 🎄
    BluefoxB
    Bluefox
    24
    1
    1.7k

  • UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?
    apollon77A
    apollon77
    48
    3
    9.6k

CCU3 und IOBroker (Synology Docker) Objekte Fehler

Geplant Angeheftet Gesperrt Verschoben Installation
ccu3 synology docker objekte
18 Beiträge 3 Kommentatoren 1.2k Aufrufe 2 Watching
  • Älteste zuerst
  • Neuste zuerst
  • Meiste Stimmen
Antworten
  • In einem neuen Thema antworten
Anmelden zum Antworten
Dieses Thema wurde gelöscht. Nur Nutzer mit entsprechenden Rechten können es sehen.
  • paul53P paul53

    @baybod sagt::

    Adapter Callback Adresse
    172.17.0.2

    Hier muss die IP-Adresse des Docker-Hosts rein (192.168.178.xyz).
    Welche Version hat der Adapter hm-rpc?

    B Offline
    B Offline
    baybod
    schrieb am zuletzt editiert von
    #3

    @paul53 Danke Dir für den Tipp. Habe ich geändert, neu gestartet sowohl docker container als auch homematic...kein Unterschied leider

    wendy2702W 1 Antwort Letzte Antwort
    0
    • B baybod

      @paul53 Danke Dir für den Tipp. Habe ich geändert, neu gestartet sowohl docker container als auch homematic...kein Unterschied leider

      wendy2702W Offline
      wendy2702W Offline
      wendy2702
      schrieb am zuletzt editiert von
      #4

      @baybod Kannst du mal Screenshots der Adapter Einstellungen posten.

      Bitte keine Fragen per PN, die gehören ins Forum!

      Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

      1 Antwort Letzte Antwort
      0
      • paul53P paul53

        @baybod sagt::

        Adapter Callback Adresse
        172.17.0.2

        Hier muss die IP-Adresse des Docker-Hosts rein (192.168.178.xyz).
        Welche Version hat der Adapter hm-rpc?

        B Offline
        B Offline
        baybod
        schrieb am zuletzt editiert von
        #5

        @paul53 der Adapter hat die Version 1.15.11

        wendy2702W 1 Antwort Letzte Antwort
        0
        • B baybod

          @paul53 der Adapter hat die Version 1.15.11

          wendy2702W Offline
          wendy2702W Offline
          wendy2702
          schrieb am zuletzt editiert von
          #6

          @baybod Hilfreich ist eventuell auch ein logfile wenn das loggen für die Instanz auf Debug steht.

          Bitte keine Fragen per PN, die gehören ins Forum!

          Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

          B 2 Antworten Letzte Antwort
          0
          • paul53P paul53

            @baybod sagt::

            Adapter Callback Adresse
            172.17.0.2

            Hier muss die IP-Adresse des Docker-Hosts rein (192.168.178.xyz).
            Welche Version hat der Adapter hm-rpc?

            B Offline
            B Offline
            baybod
            schrieb am zuletzt editiert von
            #7

            ich verfüge nicht über "ausreichende berechtigungen" um bilder per drag und drop abzulegen (stand da). Ich habe aber alle Werte oben aus den screenshots abgeschrieben, siehe ursprungsbeitrag....

            wendy2702W 1 Antwort Letzte Antwort
            0
            • wendy2702W wendy2702

              @baybod Hilfreich ist eventuell auch ein logfile wenn das loggen für die Instanz auf Debug steht.

              B Offline
              B Offline
              baybod
              schrieb am zuletzt editiert von wendy2702
              #8

              @wendy2702 hier das debug log von dem rega adapter:

              hm-rega.0
              27829	2022-03-19 19:33:31.479	info	deleted 0 programs
              
              hm-rega.0
              27829	2022-03-19 19:33:31.478	info	added/updated 2 programs
              
              hm-rega.0
              27829	2022-03-19 19:33:31.429	debug	Skip favorites of empty user
              
              hm-rega.0
              27829	2022-03-19 19:33:31.425	info	update favorites to enum.favorites
              
              hm-rega.0
              27829	2022-03-19 19:33:31.422	debug	<-- {"":{}}
              
              hm-rega.0
              27829	2022-03-19 19:33:31.414	debug	--> !# favorites.fn 1.1 !# !# Dieses Script gibt die Favoriten als JSON String aus !
              
              hm-rega.0
              27829	2022-03-19 19:33:31.404	debug	--> favorites.fn
              
              hm-rega.0
              27829	2022-03-19 19:33:31.334	info	update functions to enum.functions
              
              hm-rega.0
              27829	2022-03-19 19:33:31.326	debug	<-- {"1222": {"Name": "funcButton","TypeName":"ENUM_FUNCTIONS", "EnumInfo": "", "Channels": []}, "1223": {"Name": "funcCentral","TypeName":"ENUM_FUNCTIONS", "EnumInfo": "", "Channels": [{"Address":"BidCoS-RF:1","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:10","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:11","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:12","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:13","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:14","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:15","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:16","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:17","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:18","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:19","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:2","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:20","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:21","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:22","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:23","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:24","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:25","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:26","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:27","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:28","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:29","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:3","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:30","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:31","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:32","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:33","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:34","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:35","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:36","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:37","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:38","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:39","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:4","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:40","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:41","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:42","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:43","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:44","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:45","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:46","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:47","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:48","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:49","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:5","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:50","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:6","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:7","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:8","Interface":"BidCos-RF"},{"Address":"BidCoS-RF:9","Interface":"BidCos-RF"},{"Address":"HmIP-RCV-1:0","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:1","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:10","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:11","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:12","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:13","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:14","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:15","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:16","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:17","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:18","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:19","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:2","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:20","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:21","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:22","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:23","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:24","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:25","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:26","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:27","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:28","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:29","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:3","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:30","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:31","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:32","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:33","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:34","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:35","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:36","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:37","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:38","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:39","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:4","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:40","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:41","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:42","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:43","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:44","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:45","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:46","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:47","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:48","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:49","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:5","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:50","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:6","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:7","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:8","Interface":"HmIP-RF"},{"Address":"HmIP-RCV-1:9","Interface":"HmIP-RF"},{"Address":"CUX2801001:1","Interface":"CUxD"}]}, "1217": {"Name": "funcClimateControl","TypeName":"ENUM_FUNCTIONS", "EnumInfo": "", "Channels": []}, "1224": {"Name": "funcEnergy","TypeName":"ENUM_FUNCTIONS", "EnumInfo": "", "Channels": []}, "1219": {"Name": "funcEnvironment","TypeName":"ENUM_FUNCTIONS", "EnumInfo": "", "Channels": []}, "1216": {"Name": "funcHeating","TypeName":"ENUM_FUNCTIONS", "EnumInfo": "", "Channels": [{"Address":"KEQ1042638:4","Interface":"BidCos-RF"},{"Address":"LEQ0582178:4","Interface":"BidCos-RF"},{"Address":"LEQ0861150:4","Interface":"BidCos-RF"}]}, "1215": {"Name": "funcLight","TypeName":"ENUM_FUNCTIONS", "EnumInfo": "", "Channels": [{"Address":"LEQ0768843:1","Interface":"BidCos-RF"},{"Address":"MEQ1101656:1","Interface":"BidCos-RF"},{"Address":"CUX2801001:10","Interface":"CUxD"},{"Address":"CUX2801001:11","Interface":"CUxD"},{"Address":"CUX2801001:12","Interface":"CUxD"},{"Address":"CUX2801001:13","Interface":"CUxD"},{"Address":"CUX2801001:14","Interface":"CUxD"},{"Address":"CUX2801001:15","Interface":"CUxD"},{"Address":"CUX2801001:16","Interface":"CUxD"},{"Address":"CUX2801001:2","Interface":"CUxD"},{"Address":"CUX2801001:3","Interface":"CUxD"},{"Address":"CUX2801001:4","Interface":"CUxD"},{"Address":"CUX2801001:5","Interface":"CUxD"},{"Address":"CUX2801001:6","Interface":"CUxD"},{"Address":"CUX2801001:7","Interface":"CUxD"},{"Address":"CUX2801001:8","Interface":"CUxD"},{"Address":"CUX2801001:9","Interface":"CUxD"}]}, "1220": {"Name": "funcSecurity","TypeName":"ENUM_FUNCTIONS", "EnumInfo": "", "Channels": []}, "1218": {"Name": "funcWeather","TypeName":"ENUM_FUNCTIONS", "EnumInfo": "", "Channels": []}, "1757": {"Name": "Jalousie","TypeName":"ENUM_FUNCTIONS", "EnumInfo": "", "Channels": [{"Address":"LEQ0768843:1","Interface":"BidCos-RF"},{"Address":"OEQ0978600:1","Interface":"BidCos-RF"}]}, "1221": {"Name": "Verschluss","TypeName":"ENUM_FUNCTIONS", "EnumInfo": "", "Channels": []}}
              
              hm-rega.0
              27829	2022-03-19 19:33:31.310	debug	--> !# functions.fn 1.3 !# !# Dieses Script gibt eine Liste der Gewerke als JSON Str
              
              hm-rega.0
              27829	2022-03-19 19:33:31.296	debug	--> functions.fn
              
              hm-rega.0
              27829	2022-03-19 19:33:31.221	debug	<-- {"1505":{"Name":"Jalousie%20hoch","TypeName":"PROGRAM","PrgInfo":"", "Active":true,"Timestamp":"1970-01-01 01:00:00"}, "1584":{"Name":"Jalousie%20runter","TypeName":"PROGRAM","PrgInfo":"", "Active":true,"Timestamp":"1970-01-01 01:00:00"}}
              
              hm-rega.0
              27829	2022-03-19 19:33:31.213	debug	--> !# programs.fn 1.3 !# Dieses Script gibt eine Liste der Programme als JSON Strin
              
              hm-rega.0
              27829	2022-03-19 19:33:31.204	info	update rooms to enum.rooms
              
              hm-rega.0
              27829	2022-03-19 19:33:31.200	debug	<-- {"1231": {"Name": "Badezimmer", "TypeName":"ENUM_ROOMS", "EnumInfo":"", "Channels":[{"Address":"KEQ1042638:4","Interface":"BidCos-RF"}]}, "1756": {"Name": "Dusche", "TypeName":"ENUM_ROOMS", "EnumInfo":"", "Channels":[{"Address":"LEQ0582178:4","Interface":"BidCos-RF"},{"Address":"OEQ0978600:1","Interface":"BidCos-RF"}]}, "1230": {"Name": "Gaestezimmer", "TypeName":"ENUM_ROOMS", "EnumInfo":"", "Channels":[{"Address":"LEQ0768843:1","Interface":"BidCos-RF"},{"Address":"CUX2801001:1","Interface":"CUxD"}]}, "1234": {"Name": "Garten", "TypeName":"ENUM_ROOMS", "EnumInfo":"", "Channels":[]}, "2083": {"Name": "Keller", "TypeName":"ENUM_ROOMS", "EnumInfo":"", "Channels":[{"Address":"LEQ0861150:4","Interface":"BidCos-RF"}]}, "1228": {"Name": "Kinderzimmer", "TypeName":"ENUM_ROOMS", "EnumInfo":"", "Channels":[]}, "1227": {"Name": "roomBedroom", "TypeName":"ENUM_ROOMS", "EnumInfo":"", "Channels":[]}, "1232": {"Name": "roomGarage", "TypeName":"ENUM_ROOMS", "EnumInfo":"", "Channels":[]}, "1233": {"Name": "roomHWR", "TypeName":"ENUM_ROOMS", "EnumInfo":"", "Channels":[]}, "1226": {"Name": "roomKitchen", "TypeName":"ENUM_ROOMS", "EnumInfo":"", "Channels":[]}, "1225": {"Name": "roomLivingRoom", "TypeName":"ENUM_ROOMS", "EnumInfo":"", "Channels":[]}, "1229": {"Name": "Studio", "TypeName":"ENUM_ROOMS", "EnumInfo":"", "Channels":[]}, "1235": {"Name": "Terrasse", "TypeName":"ENUM_ROOMS", "EnumInfo":"", "Channels":[]}}
              
              hm-rega.0
              27829	2022-03-19 19:33:31.191	debug	--> !# rooms.fn 1.2 !# !# Dieses Script gibt eine Liste der Raeume als JSON Objekt a
              
              hm-rega.0
              27829	2022-03-19 19:33:31.187	debug	--> programs.fn
              
              hm-rega.0
              27829	2022-03-19 19:33:31.186	info	got 2 programs
              
              hm-rega.0
              27829	2022-03-19 19:33:31.155	debug	--> rooms.fn
              
              hm-rega.0
              27829	2022-03-19 19:33:31.153	info	deleted 0 variables
              
              hm-rega.0
              27829	2022-03-19 19:33:31.152	info	added/updated 5 variables
              
              hm-rega.0
              27829	2022-03-19 19:33:31.052	debug	<-- {"40":{"Name":"Alarmmeldungen","TypeName":"VARDP","DPInfo":"Anzahl%20Alarmmeldungen","Value":0,"ValueMin":0,"ValueMax":65000,"ValueUnit":"","ValueType":16,"ValueSubType":0,"ValueList":""}, "41":{"Name":"Servicemeldungen","TypeName":"VARDP","DPInfo":"Anzahl%20Servicemeldungen","Value":0,"ValueMin":0,"ValueMax":65000,"ValueUnit":"","ValueType":16,"ValueSubType":0,"ValueList":""}, "1236":{"Name":"%24%7BsysVarAlarmZone1%7D","TypeName":"ALARMDP","DPInfo":"%24%7BsysVarAlarmZone1Msg%7D","Value":false,"Timestamp":"1970-01-01 01:00:00","ValueMin":null,"ValueMax":null,"ValueUnit":"","ValueType":2,"ValueSubType":6,"ValueList":"%24%7BsysVarAlarmZone1NotTriggered%7D%3B%24%7BsysVarAlarmZone1Triggered%7D"}, "950":{"Name":"%24%7BsysVarPresence%7D","TypeName":"VARDP","DPInfo":"%24%7BsysVarPresenceMsg%7D","Value":true,"Timestamp":"2022-03-19 18:10:18","ValueMin":null,"ValueMax":null,"ValueUnit":"","ValueType":2,"ValueSubType":2,"ValueList":"%24%7BsysVarPresenceNotPresent%7D%3B%24%7BsysVarPresencePresent%7D"}, "1517":{"Name":"RolloZustand","TypeName":"VARDP","DPInfo":"RolloZustandVariable","Value":false,"Timestamp":"2022-03-19 18:10:17","ValueMin":null,"ValueMax":null,"ValueUnit":"","ValueType":2,"ValueSubType":2,"ValueList":"runter%3Bhoch"}}
              
              hm-rega.0
              27829	2022-03-19 19:33:31.040	debug	--> !# variables.fn 1.6 !# !# Dieses Script gibt die Systemvariablen als JSON String
              
              hm-rega.0
              27829	2022-03-19 19:33:31.035	debug	--> variables.fn
              
              hm-rega.0
              27829	2022-03-19 19:33:31.034	info	got 5 variables
              
              hm-rega.0
              27829	2022-03-19 19:33:31.004	info	added/updated 1 objects
              
              hm-rega.0
              27829	2022-03-19 19:33:30.798	debug	<-- { "ccuVersion": "3.61.7", "regaVersion": "2.1.369", "buildLabel": "R1.00.0388.0217", "countDevices": 10, "countChannels": 149, "countDatapoints": 883, "countSystemVars": 5, "countPrograms": 2 }
              
              hm-rega.0
              27829	2022-03-19 19:33:30.781	debug	--> !# system.fn 0.1 !# !# Dieses Script gibt die FW-Versionsnummer und mehr systems
              
              hm-rega.0
              27829	2022-03-19 19:33:30.776	debug	--> system.fn
              
              hm-rega.0
              27829	2022-03-19 19:33:30.774	debug	<-- {ADDRESS QEQ0209056 CONNECTED 1 DEFAULT 1 DESCRIPTION {} DUTY_CYCLE 0 FIRMWARE_VERSION 4.4.12 TYPE CCU2}
              
              hm-rega.0
              27829	2022-03-19 19:33:30.725	debug	--> !# dutycycle.fn 0.3 string stderr; string stdout; system.Exec("/bin/sh -c '" # '
              
              hm-rega.0
              27829	2022-03-19 19:33:30.665	debug	--> dutycycle.fn
              
              hm-rega.0
              27829	2022-03-19 19:33:30.664	info	Updated all datapoints
              
              hm-rega.0
              27829	2022-03-19 19:33:30.664	debug	Do not set "{"val":0,"ack":true}" to "hm-rpc.0.MEQ1101656.1.LEVEL", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.663	debug	Do not set "{"val":0,"ack":true}" to "hm-rpc.0.LEQ0861150.4.PARTY_STOP_YEAR", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.663	debug	Do not set "{"val":1,"ack":true}" to "hm-rpc.0.LEQ0861150.4.PARTY_STOP_MONTH", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.662	debug	Do not set "{"val":1,"ack":true}" to "hm-rpc.0.LEQ0861150.4.PARTY_STOP_DAY", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.662	debug	Do not set "{"val":0,"ack":true}" to "hm-rpc.0.LEQ0861150.4.PARTY_STOP_TIME", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.662	debug	Do not set "{"val":0,"ack":true}" to "hm-rpc.0.LEQ0861150.4.PARTY_START_YEAR", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.661	debug	Do not set "{"val":1,"ack":true}" to "hm-rpc.0.LEQ0861150.4.PARTY_START_MONTH", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.661	debug	Do not set "{"val":1,"ack":true}" to "hm-rpc.0.LEQ0861150.4.PARTY_START_DAY", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.660	debug	Do not set "{"val":0,"ack":true}" to "hm-rpc.0.LEQ0861150.4.PARTY_START_TIME", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.660	debug	Do not set "{"val":5,"ack":true}" to "hm-rpc.0.LEQ0861150.4.PARTY_TEMPERATURE", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.660	debug	Do not set "{"val":22,"ack":true}" to "hm-rpc.0.LEQ0861150.4.SET_TEMPERATURE", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.659	debug	Do not set "{"val":24.1,"ack":true}" to "hm-rpc.0.LEQ0861150.4.ACTUAL_TEMPERATURE", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.659	debug	Do not set "{"val":0,"ack":true}" to "hm-rpc.0.LEQ0861150.4.BOOST_STATE", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.659	debug	Do not set "{"val":7,"ack":true}" to "hm-rpc.0.LEQ0861150.4.VALVE_STATE", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.658	debug	Do not set "{"val":3,"ack":true}" to "hm-rpc.0.LEQ0861150.4.BATTERY_STATE", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.658	debug	Do not set "{"val":0,"ack":true}" to "hm-rpc.0.LEQ0861150.4.FAULT_REPORTING", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.657	debug	Do not set "{"val":0,"ack":true}" to "hm-rpc.0.LEQ0861150.4.CONTROL_MODE", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.657	debug	Do not set "{"val":false,"ack":true}" to "hm-rpc.0.LEQ0768843.1.INHIBIT", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.657	debug	Do not set "{"val":1,"ack":true}" to "hm-rpc.0.LEQ0768843.1.LEVEL", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.656	debug	Do not set "{"val":0,"ack":true}" to "hm-rpc.0.LEQ0582178.4.PARTY_STOP_YEAR", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.656	debug	Do not set "{"val":1,"ack":true}" to "hm-rpc.0.LEQ0582178.4.PARTY_STOP_MONTH", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.656	debug	Do not set "{"val":1,"ack":true}" to "hm-rpc.0.LEQ0582178.4.PARTY_STOP_DAY", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.655	debug	Do not set "{"val":0,"ack":true}" to "hm-rpc.0.LEQ0582178.4.PARTY_STOP_TIME", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.655	debug	Do not set "{"val":0,"ack":true}" to "hm-rpc.0.LEQ0582178.4.PARTY_START_YEAR", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.654	debug	Do not set "{"val":1,"ack":true}" to "hm-rpc.0.LEQ0582178.4.PARTY_START_MONTH", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.654	debug	Do not set "{"val":1,"ack":true}" to "hm-rpc.0.LEQ0582178.4.PARTY_START_DAY", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.654	debug	Do not set "{"val":0,"ack":true}" to "hm-rpc.0.LEQ0582178.4.PARTY_START_TIME", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.653	debug	Do not set "{"val":5,"ack":true}" to "hm-rpc.0.LEQ0582178.4.PARTY_TEMPERATURE", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.653	debug	Do not set "{"val":18,"ack":true}" to "hm-rpc.0.LEQ0582178.4.SET_TEMPERATURE", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.653	debug	Do not set "{"val":25.6,"ack":true}" to "hm-rpc.0.LEQ0582178.4.ACTUAL_TEMPERATURE", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.652	debug	Do not set "{"val":0,"ack":true}" to "hm-rpc.0.LEQ0582178.4.BOOST_STATE", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.652	debug	Do not set "{"val":0,"ack":true}" to "hm-rpc.0.LEQ0582178.4.VALVE_STATE", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.651	debug	Do not set "{"val":2.6,"ack":true}" to "hm-rpc.0.LEQ0582178.4.BATTERY_STATE", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.651	debug	Do not set "{"val":0,"ack":true}" to "hm-rpc.0.LEQ0582178.4.FAULT_REPORTING", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.651	debug	Do not set "{"val":0,"ack":true}" to "hm-rpc.0.LEQ0582178.4.CONTROL_MODE", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.650	debug	Do not set "{"val":0,"ack":true}" to "hm-rpc.0.KEQ1042638.4.PARTY_STOP_YEAR", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.650	debug	Do not set "{"val":1,"ack":true}" to "hm-rpc.0.KEQ1042638.4.PARTY_STOP_MONTH", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.650	debug	Do not set "{"val":1,"ack":true}" to "hm-rpc.0.KEQ1042638.4.PARTY_STOP_DAY", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.649	debug	Do not set "{"val":0,"ack":true}" to "hm-rpc.0.KEQ1042638.4.PARTY_STOP_TIME", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.649	debug	Do not set "{"val":0,"ack":true}" to "hm-rpc.0.KEQ1042638.4.PARTY_START_YEAR", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.648	debug	Do not set "{"val":1,"ack":true}" to "hm-rpc.0.KEQ1042638.4.PARTY_START_MONTH", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.648	debug	Do not set "{"val":1,"ack":true}" to "hm-rpc.0.KEQ1042638.4.PARTY_START_DAY", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.648	debug	Do not set "{"val":0,"ack":true}" to "hm-rpc.0.KEQ1042638.4.PARTY_START_TIME", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.647	debug	Do not set "{"val":5,"ack":true}" to "hm-rpc.0.KEQ1042638.4.PARTY_TEMPERATURE", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.647	debug	Do not set "{"val":18,"ack":true}" to "hm-rpc.0.KEQ1042638.4.SET_TEMPERATURE", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.646	debug	Do not set "{"val":24.8,"ack":true}" to "hm-rpc.0.KEQ1042638.4.ACTUAL_TEMPERATURE", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.646	debug	Do not set "{"val":0,"ack":true}" to "hm-rpc.0.KEQ1042638.4.BOOST_STATE", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.645	debug	Do not set "{"val":0,"ack":true}" to "hm-rpc.0.KEQ1042638.4.VALVE_STATE", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.645	debug	Do not set "{"val":2.8,"ack":true}" to "hm-rpc.0.KEQ1042638.4.BATTERY_STATE", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.644	debug	Do not set "{"val":0,"ack":true}" to "hm-rpc.0.KEQ1042638.4.FAULT_REPORTING", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.644	debug	Do not set "{"val":0,"ack":true}" to "hm-rpc.0.KEQ1042638.4.CONTROL_MODE", because non-existing in corresponding adapter
              
              hm-rega.0
              27829	2022-03-19 19:33:30.641	debug	<-- {"BidCos-RF.KEQ1042638%3A4.CONTROL_MODE":0, "BidCos-RF.KEQ1042638%3A4.FAULT_REPORTING":0, "BidCos-RF.KEQ1042638%3A4.BATTERY_STATE":2.800000, "BidCos-RF.KEQ1042638%3A4.VALVE_STATE":0, "BidCos-RF.KEQ1042638%3A4.BOOST_STATE":0, "BidCos-RF.KEQ1042638%3A4.ACTUAL_TEMPERATURE":24.800000, "BidCos-RF.KEQ1042638%3A4.SET_TEMPERATURE":18.000000, "BidCos-RF.KEQ1042638%3A4.PARTY_TEMPERATURE":5.000000, "BidCos-RF.KEQ1042638%3A4.PARTY_START_TIME":0, "BidCos-RF.KEQ1042638%3A4.PARTY_START_DAY":1, "BidCos-RF.KEQ1042638%3A4.PARTY_START_MONTH":1, "BidCos-RF.KEQ1042638%3A4.PARTY_START_YEAR":0, "BidCos-RF.KEQ1042638%3A4.PARTY_STOP_TIME":0, "BidCos-RF.KEQ1042638%3A4.PARTY_STOP_DAY":1, "BidCos-RF.KEQ1042638%3A4.PARTY_STOP_MONTH":1, "BidCos-RF.KEQ1042638%3A4.PARTY_STOP_YEAR":0, "BidCos-RF.LEQ0582178%3A4.CONTROL_MODE":0, "BidCos-RF.LEQ0582178%3A4.FAULT_REPORTING":0, "BidCos-RF.LEQ0582178%3A4.BATTERY_STATE":2.600000, "BidCos-RF.LEQ0582178%3A4.VALVE_STATE":0, "BidCos-RF.LEQ0582178%3A4.BOOST_STATE":0, "BidCos-RF.LEQ0582178%3A4.ACTUAL_TEMPERATURE":25.600000, "BidCos-RF.LEQ0582178%3A4.SET_TEMPERATURE":18.000000, "BidCos-RF.LEQ0582178%3A4.PARTY_TEMPERATURE":5.000000, "BidCos-RF.LEQ0582178%3A4.PARTY_START_TIME":0, "BidCos-RF.LEQ0582178%3A4.PARTY_START_DAY":1, "BidCos-RF.LEQ0582178%3A4.PARTY_START_MONTH":1, "BidCos-RF.LEQ0582178%3A4.PARTY_START_YEAR":0, "BidCos-RF.LEQ0582178%3A4.PARTY_STOP_TIME":0, "BidCos-RF.LEQ0582178%3A4.PARTY_STOP_DAY":1, "BidCos-RF.LEQ0582178%3A4.PARTY_STOP_MONTH":1, "BidCos-RF.LEQ0582178%3A4.PARTY_STOP_YEAR":0, "BidCos-RF.LEQ0768843%3A1.LEVEL":1.000000, "BidCos-RF.LEQ0768843%3A1.INHIBIT":false, "BidCos-RF.LEQ0861150%3A4.CONTROL_MODE":0, "BidCos-RF.LEQ0861150%3A4.FAULT_REPORTING":0, "BidCos-RF.LEQ0861150%3A4.BATTERY_STATE":3.000000, "BidCos-RF.LEQ0861150%3A4.VALVE_STATE":7, "BidCos-RF.LEQ0861150%3A4.BOOST_STATE":0, "BidCos-RF.LEQ0861150%3A4.ACTUAL_TEMPERATURE":24.100000, "BidCos-RF.LEQ0861150%3A4.SET_TEMPERATURE":22.000000, "BidCos-RF.LEQ0861150%3A4.PARTY_TEMPERATURE":5.000000, "BidCos-RF.LEQ0861150%3A4.PARTY_START_TIME":0, "BidCos-RF.LEQ0861150%3A4.PARTY_START_DAY":1, "BidCos-RF.LEQ0861150%3A4.PARTY_START_MONTH":1, "BidCos-RF.LEQ0861150%3A4.PARTY_START_YEAR":0, "BidCos-RF.LEQ0861150%3A4.PARTY_STOP_TIME":0, "BidCos-RF.LEQ0861150%3A4.PARTY_STOP_DAY":1, "BidCos-RF.LEQ0861150%3A4.PARTY_STOP_MONTH":1, "BidCos-RF.LEQ0861150%3A4.PARTY_STOP_YEAR":0, "BidCos-RF.MEQ1101656%3A1.LEVEL":0}
              
              hm-rega.0
              27829	2022-03-19 19:33:30.607	debug	--> !# datapoints.fn 1.9 !# !# Dieses Homematic-Script gibt eine Liste aller Datenpu
              
              hm-rega.0
              27829	2022-03-19 19:33:30.600	debug	--> datapoints.fn
              
              hm-rega.0
              27829	2022-03-19 19:33:30.599	info	request state values
              
              hm-rega.0
              27829	2022-03-19 19:33:30.598	info	renamed hm-rpc.0.MEQ1101656.1 to "WZ-Jalousie-Essen-Nachbar:1"
              
              hm-rega.0
              27829	2022-03-19 19:33:30.592	info	renamed hm-rpc.0.LEQ0861150.6 to "KellerJulian-Heizung:6"
              
              hm-rega.0
              27829	2022-03-19 19:33:30.587	info	renamed hm-rpc.0.LEQ0861150.5 to "KellerJulian-Heizung:5"
              
              hm-rega.0
              27829	2022-03-19 19:33:30.581	info	renamed hm-rpc.0.LEQ0861150.4.FAULT_REPORTING-7_ALARM to "KellerJulian-Heizung:4.FAULT_REPORTING-7_ALARM"
              
              hm-rega.0
              27829	2022-03-19 19:33:30.570	info	renamed hm-rpc.0.LEQ0861150.4.FAULT_REPORTING-6_ALARM to "KellerJulian-Heizung:4.FAULT_REPORTING-6_ALARM"
              
              hm-rega.0
              27829	2022-03-19 19:33:30.559	info	renamed hm-rpc.0.LEQ0861150.4.FAULT_REPORTING-5_ALARM to "KellerJulian-Heizung:4.FAULT_REPORTING-5_ALARM"
              
              hm-rega.0
              27829	2022-03-19 19:33:30.552	info	renamed hm-rpc.0.LEQ0861150.4.FAULT_REPORTING-4_ALARM to "KellerJulian-Heizung:4.FAULT_REPORTING-4_ALARM"
              
              hm-rega.0
              27829	2022-03-19 19:33:30.544	info	renamed hm-rpc.0.LEQ0861150.4.FAULT_REPORTING-3_ALARM to "KellerJulian-Heizung:4.FAULT_REPORTING-3_ALARM"
              
              hm-rega.0
              27829	2022-03-19 19:33:30.538	info	renamed hm-rpc.0.LEQ0861150.4.FAULT_REPORTING-2_ALARM to "KellerJulian-Heizung:4.FAULT_REPORTING-2_ALARM"
              
              hm-rega.0
              27829	2022-03-19 19:33:30.530	info	renamed hm-rpc.0.LEQ0861150.4.FAULT_REPORTING-1_ALARM to "KellerJulian-Heizung:4.FAULT_REPORTING-1_ALARM"
              
              hm-rega.0
              27829	2022-03-19 19:33:30.522	info	renamed hm-rpc.0.LEQ0861150.4 to "KellerJulian-Heizung:4"
              
              hm-rega.0
              27829	2022-03-19 19:33:30.515	info	renamed hm-rpc.0.LEQ0861150.3 to "KellerJulian-Heizung:3"
              
              hm-rega.0
              27829	2022-03-19 19:33:30.506	info	renamed hm-rpc.0.LEQ0861150.2 to "KellerJulian-Heizung:2"
              
              hm-rega.0
              27829	2022-03-19 19:33:30.500	info	renamed hm-rpc.0.LEQ0861150.1 to "KellerJulian-Heizung:1"
              

              MOD EDIT: Logs in Code Tags

              1 Antwort Letzte Antwort
              0
              • wendy2702W wendy2702

                @baybod Hilfreich ist eventuell auch ein logfile wenn das loggen für die Instanz auf Debug steht.

                B Offline
                B Offline
                baybod
                schrieb am zuletzt editiert von wendy2702
                #9

                @wendy2702 und vom rpc

                hm-rpc.0
                27612	2022-03-19 19:36:12.881	debug	start connecting interval
                
                hm-rpc.0
                27612	2022-03-19 19:36:12.880	debug	clear ping interval
                
                hm-rpc.0
                27612	2022-03-19 19:36:12.880	debug	Connect...
                
                hm-rpc.0
                27612	2022-03-19 19:36:12.879	debug	[KEEPALIVE] Connection timed out, initializing new connection
                
                hm-rpc.0
                27612	2022-03-19 19:36:12.879	debug	[KEEPALIVE] Check if connection is alive
                
                hm-rpc.0
                27612	2022-03-19 19:34:42.893	debug	PING ok
                
                hm-rpc.0
                27612	2022-03-19 19:34:42.880	debug	Send PING...
                
                hm-rpc.0
                27612	2022-03-19 19:34:42.879	debug	[KEEPALIVE] Check if connection is alive
                
                B 1 Antwort Letzte Antwort
                0
                • B baybod

                  @wendy2702 und vom rpc

                  hm-rpc.0
                  27612	2022-03-19 19:36:12.881	debug	start connecting interval
                  
                  hm-rpc.0
                  27612	2022-03-19 19:36:12.880	debug	clear ping interval
                  
                  hm-rpc.0
                  27612	2022-03-19 19:36:12.880	debug	Connect...
                  
                  hm-rpc.0
                  27612	2022-03-19 19:36:12.879	debug	[KEEPALIVE] Connection timed out, initializing new connection
                  
                  hm-rpc.0
                  27612	2022-03-19 19:36:12.879	debug	[KEEPALIVE] Check if connection is alive
                  
                  hm-rpc.0
                  27612	2022-03-19 19:34:42.893	debug	PING ok
                  
                  hm-rpc.0
                  27612	2022-03-19 19:34:42.880	debug	Send PING...
                  
                  hm-rpc.0
                  27612	2022-03-19 19:34:42.879	debug	[KEEPALIVE] Check if connection is alive
                  
                  B Offline
                  B Offline
                  baybod
                  schrieb am zuletzt editiert von wendy2702
                  #10

                  hier etwas längeres rpc log:

                  hm-rpc.0
                  27612	2022-03-19 19:40:12.909	debug	start ping interval
                  
                  hm-rpc.0
                  27612	2022-03-19 19:40:12.908	debug	clear connecting interval
                  
                  hm-rpc.0
                  27612	2022-03-19 19:40:12.897	debug	xmlrpc -> 192.168.178.82:2001/ init ["http://192.168.178.25:2001","iobroker-new:hm-rpc.0:a89d062ee6e3ac7b202bf92efa0d8546"]
                  
                  hm-rpc.0
                  27612	2022-03-19 19:39:42.896	debug	start connecting interval
                  
                  hm-rpc.0
                  27612	2022-03-19 19:39:42.896	debug	clear ping interval
                  
                  hm-rpc.0
                  27612	2022-03-19 19:39:42.895	debug	Connect...
                  
                  hm-rpc.0
                  27612	2022-03-19 19:39:42.894	debug	[KEEPALIVE] Connection timed out, initializing new connection
                  
                  hm-rpc.0
                  27612	2022-03-19 19:39:42.893	debug	[KEEPALIVE] Check if connection is alive
                  
                  hm-rpc.0
                  27612	2022-03-19 19:38:12.902	debug	PING ok
                  
                  hm-rpc.0
                  27612	2022-03-19 19:38:12.893	debug	Send PING...
                  
                  hm-rpc.0
                  27612	2022-03-19 19:38:12.893	debug	[KEEPALIVE] Check if connection is alive
                  
                  hm-rpc.0
                  27612	2022-03-19 19:36:42.892	debug	start ping interval
                  
                  hm-rpc.0
                  27612	2022-03-19 19:36:42.891	debug	clear connecting interval
                  
                  hm-rpc.0
                  27612	2022-03-19 19:36:42.882	debug	xmlrpc -> 192.168.178.82:2001/ init ["http://192.168.178.25:2001","iobroker-new:hm-rpc.0:a89d062ee6e3ac7b202bf92efa0d8546"]
                  
                  hm-rpc.0
                  27612	2022-03-19 19:36:12.881	debug	start connecting interval
                  
                  hm-rpc.0
                  27612	2022-03-19 19:36:12.880	debug	clear ping interval
                  
                  hm-rpc.0
                  27612	2022-03-19 19:36:12.880	debug	Connect...
                  
                  hm-rpc.0
                  27612	2022-03-19 19:36:12.879	debug	[KEEPALIVE] Connection timed out, initializing new connection
                  
                  hm-rpc.0
                  27612	2022-03-19 19:36:12.879	debug	[KEEPALIVE] Check if connection is alive
                  
                  hm-rpc.0
                  27612	2022-03-19 19:34:42.893	debug	PING ok
                  
                  hm-rpc.0
                  27612	2022-03-19 19:34:42.880	debug	Send PING...
                  
                  hm-rpc.0
                  27612	2022-03-19 19:34:42.879	debug	[KEEPALIVE] Check if connection is alive
                  
                  1 Antwort Letzte Antwort
                  0
                  • B baybod

                    ich verfüge nicht über "ausreichende berechtigungen" um bilder per drag und drop abzulegen (stand da). Ich habe aber alle Werte oben aus den screenshots abgeschrieben, siehe ursprungsbeitrag....

                    wendy2702W Offline
                    wendy2702W Offline
                    wendy2702
                    schrieb am zuletzt editiert von
                    #11

                    @baybod sagte in CCU3 und IOBroker (Synology Docker) Objekte Fehler:

                    ich verfüge nicht über "ausreichende berechtigungen" um bilder per drag und drop abzulegen (stand da). Ich habe aber alle Werte oben aus den screenshots abgeschrieben, siehe ursprungsbeitrag....

                    Kannst du mal per Copy & Paste versuchen

                    Bitte keine Fragen per PN, die gehören ins Forum!

                    Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

                    B 1 Antwort Letzte Antwort
                    0
                    • wendy2702W wendy2702

                      @baybod sagte in CCU3 und IOBroker (Synology Docker) Objekte Fehler:

                      ich verfüge nicht über "ausreichende berechtigungen" um bilder per drag und drop abzulegen (stand da). Ich habe aber alle Werte oben aus den screenshots abgeschrieben, siehe ursprungsbeitrag....

                      Kannst du mal per Copy & Paste versuchen

                      B Offline
                      B Offline
                      baybod
                      schrieb am zuletzt editiert von baybod
                      #12

                      @wendy2702 io-broker-rpc2.jpg io-broker-rpc1.jpg io rega2.jpg io rega1.jpg

                      B 1 Antwort Letzte Antwort
                      0
                      • B baybod

                        @wendy2702 io-broker-rpc2.jpg io-broker-rpc1.jpg io rega2.jpg io rega1.jpg

                        B Offline
                        B Offline
                        baybod
                        schrieb am zuletzt editiert von baybod
                        #13

                        @baybod Ich habe keine Ahnung mehr, was ich noch machen kann, damit er die Objekte wieder komplett inkl. aller Attribute lädt und bin für Hilfe dankbar

                        B 1 Antwort Letzte Antwort
                        0
                        • B baybod

                          @baybod Ich habe keine Ahnung mehr, was ich noch machen kann, damit er die Objekte wieder komplett inkl. aller Attribute lädt und bin für Hilfe dankbar

                          B Offline
                          B Offline
                          baybod
                          schrieb am zuletzt editiert von
                          #14

                          Im Rega Adapter werden korrekterweise bei Anzahl Datapoints 883 angezeigt. Im RPC sind aber nur ca. 60, die alle nur mit "Alarm" zu tun haben.
                          Was kann ich hier übersehen haben?

                          wendy2702W 1 Antwort Letzte Antwort
                          0
                          • B baybod

                            Im Rega Adapter werden korrekterweise bei Anzahl Datapoints 883 angezeigt. Im RPC sind aber nur ca. 60, die alle nur mit "Alarm" zu tun haben.
                            Was kann ich hier übersehen haben?

                            wendy2702W Offline
                            wendy2702W Offline
                            wendy2702
                            schrieb am zuletzt editiert von
                            #15

                            @baybod Kannst du bei Callback mal die Adresse vom Interface einstellen.

                            Bitte keine Fragen per PN, die gehören ins Forum!

                            Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

                            B 1 Antwort Letzte Antwort
                            0
                            • wendy2702W wendy2702

                              @baybod Kannst du bei Callback mal die Adresse vom Interface einstellen.

                              B Offline
                              B Offline
                              baybod
                              schrieb am zuletzt editiert von
                              #16

                              @wendy2702 welche Adresse meinst du genau? die 172.2.0.17 oder die docker 192.168.178.25 (mit port) ?

                              wendy2702W 1 Antwort Letzte Antwort
                              0
                              • B baybod

                                @wendy2702 welche Adresse meinst du genau? die 172.2.0.17 oder die docker 192.168.178.25 (mit port) ?

                                wendy2702W Offline
                                wendy2702W Offline
                                wendy2702
                                schrieb am zuletzt editiert von
                                #17

                                @baybod Interface

                                Bitte keine Fragen per PN, die gehören ins Forum!

                                Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

                                B 1 Antwort Letzte Antwort
                                0
                                • wendy2702W wendy2702

                                  @baybod Interface

                                  B Offline
                                  B Offline
                                  baybod
                                  schrieb am zuletzt editiert von
                                  #18

                                  @wendy2702 ich hatte oben alles beschrieben, insofern fragte ich nach der genauen IP...ich hatte mein setup wie gefragt deshlab beschrieben

                                  1 Antwort Letzte Antwort
                                  0
                                  Antworten
                                  • In einem neuen Thema antworten
                                  Anmelden zum Antworten
                                  • Älteste zuerst
                                  • Neuste zuerst
                                  • Meiste Stimmen


                                  Support us

                                  ioBroker
                                  Community Adapters
                                  Donate

                                  865

                                  Online

                                  32.5k

                                  Benutzer

                                  81.8k

                                  Themen

                                  1.3m

                                  Beiträge
                                  Community
                                  Impressum | Datenschutz-Bestimmungen | Nutzungsbedingungen | Einwilligungseinstellungen
                                  ioBroker Community 2014-2025
                                  logo
                                  • Anmelden

                                  • Du hast noch kein Konto? Registrieren

                                  • Anmelden oder registrieren, um zu suchen
                                  • Erster Beitrag
                                    Letzter Beitrag
                                  0
                                  • Home
                                  • Aktuell
                                  • Tags
                                  • Ungelesen 0
                                  • Kategorien
                                  • Unreplied
                                  • Beliebt
                                  • GitHub
                                  • Docu
                                  • Hilfe