NEWS
Namensauflösung Homematic -> iobroker?
-
@brainjourney sagte in Namensauflösung Homematic -> iobroker?:
ich nehme an du meinst hm-rpc.0
ich meinte eigentlich alle, aber das ist ein Anfang, da das Problem ja überall auftritt, oder?
Das ist aber nicht das debug log.
Dazu bitte unter der Instanz die Logstufe von Info auf debaug stellen@homoran said in Namensauflösung Homematic -> iobroker?:
@brainjourney sagte in Namensauflösung Homematic -> iobroker?:
ich nehme an du meinst hm-rpc.0
ich meinte eigentlich alle, aber das ist ein Anfang, da das Problem ja überall auftritt, oder?
Das ist aber nicht das debug log.
Dazu bitte unter der Instanz die Logstufe von Info auf debaug stellenIch glaube das wars.
hm-rpc.0
hm-rpc.0 2021-10-13 19:32:12.857 info new HMIP devices/channels after filter: 0 hm-rpc.0 2021-10-13 19:32:12.821 info xmlrpc <- newDevices 332 hm-rpc.0 2021-10-13 19:32:12.615 info xmlrpc -> 0 devices hm-rpc.0 2021-10-13 19:32:12.568 info xmlrpc <- listDevices ["ubuntu:hm-rpc.0"] hm-rpc.0 2021-10-13 19:32:12.564 info Connected hm-rpc.0 2021-10-13 19:32:12.548 info xmlrpc client is trying to connect to 192.168.0.72:2010/ with ["http://192.168.0.71:2010","ubuntu:hm-rpc.0"] hm-rpc.0 2021-10-13 19:32:12.548 info xmlrpc server is trying to listen on 192.168.0.71:2010 hm-rpc.0 2021-10-13 19:32:12.436 info starting. Version 1.14.45 in /opt/iobroker/node_modules/iobroker.hm-rpc, node: v16.11.1, js-controller: 3.3.18 hm-rpc.0 2021-10-13 19:32:08.355 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason hm-rpc.0 2021-10-13 19:32:08.354 info terminating hm-rpc.0 2021-10-13 19:32:08.354 info Disconnected hm-rpc.0 2021-10-13 19:32:08.349 info xmlrpc -> 192.168.0.72:2010/ init ["http://192.168.0.71:2010",""] hm-rpc.0 2021-10-13 19:32:08.349 info Got terminate signal TERMINATE_YOURSELF hm-rpc.0 2021-10-13 19:31:46.619 warn State value to set for "hm-rpc.0.000A1709AF4928.1.ACTIVE_PROFILE" has value "8" greater than max "3" hm-rpc.0 2021-10-13 19:28:58.878 warn State value to set for "hm-rpc.0.000A1709AF4928.1.ACTIVE_PROFILE" has value "8" greater than max "3" hm-rpc.0 2021-10-13 19:27:12.986 warn State value to set for "hm-rpc.0.000A1A499B93FF.1.ACTIVE_PROFILE" has value "8" greater than max "3"hm-rpc.1
hm-rpc.1 2021-10-13 19:20:29.977 error Init not possible, going to stop: write EPROTO 140390935717824:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:19:28.768 error Cannot call init: [http://192.168.0.71:2001, ""] write EPROTO 140392379709376:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:19:28.753 error Init not possible, going to stop: write EPROTO 140392379709376:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:18:58.765 error Init not possible, going to stop: write EPROTO 140392379709376:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:17:57.470 error Cannot call init: [http://192.168.0.71:2001, ""] write EPROTO 140452453590976:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:17:57.455 error Init not possible, going to stop: write EPROTO 140452453590976:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:17:27.466 error Init not possible, going to stop: write EPROTO 140452453590976:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:16:26.247 error Cannot call init: [http://192.168.0.71:2001, ""] write EPROTO 139973341562816:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:16:26.232 error Init not possible, going to stop: write EPROTO 139973341562816:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:15:56.243 error Init not possible, going to stop: write EPROTO 139973341562816:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:14:54.955 error Cannot call init: [http://192.168.0.71:2001, ""] write EPROTO 140246586849216:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:14:54.940 error Init not possible, going to stop: write EPROTO 140246586849216:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:14:24.951 error Init not possible, going to stop: write EPROTO 140246586849216:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:13:23.782 error Cannot call init: [http://192.168.0.71:2001, ""] write EPROTO 140392389863360:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:13:23.767 error Init not possible, going to stop: write EPROTO 140392389863360:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:12:53.778 error Init not possible, going to stop: write EPROTO 140392389863360:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:11:52.558 error Cannot call init: [http://192.168.0.71:2001, ""] write EPROTO 140149473163200:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:11:52.544 error Init not possible, going to stop: write EPROTO 140149473163200:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:11:22.554 error Init not possible, going to stop: write EPROTO 140149473163200:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:10:21.340 error Cannot call init: [http://192.168.0.71:2001, ""] write EPROTO 139896671037376:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:10:21.325 error Init not possible, going to stop: write EPROTO 139896671037376:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:09:51.336 error Init not possible, going to stop: write EPROTO 139896671037376:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332:hm-rpc.2
hm-rpc.2 2021-10-13 19:26:34.548 info Connected hm-rpc.2 2021-10-13 19:26:34.548 info new CUxD devices/channels after filter: 0 hm-rpc.2 2021-10-13 19:26:34.504 info binrpc -> listDevices 108 hm-rpc.2 2021-10-13 19:26:34.402 info binrpc client is trying to connect to 192.168.0.72:8701/ with ["xmlrpc_bin://192.168.0.71:8701","ubuntu:hm-rpc.2"] hm-rpc.2 2021-10-13 19:26:34.402 info binrpc server is trying to listen on 192.168.0.71:8701 hm-rpc.2 2021-10-13 19:26:34.285 info starting. Version 1.14.45 in /opt/iobroker/node_modules/iobroker.hm-rpc, node: v16.11.1, js-controller: 3.3.18 hm-rpc.2 2021-10-13 19:26:30.227 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason hm-rpc.2 2021-10-13 19:26:30.227 info terminating hm-rpc.2 2021-10-13 19:26:30.226 info Disconnected hm-rpc.2 2021-10-13 19:26:30.225 info binrpc -> 192.168.0.72:8701/ init ["xmlrpc_bin://192.168.0.71:8701",""] hm-rpc.2 2021-10-13 19:26:30.224 info Got terminate signal TERMINATE_YOURSELFhm-rps.3
hm-rpc.3 2021-10-13 19:25:25.301 info Connected hm-rpc.3 2021-10-13 19:25:15.323 info xmlrpc -> 0 devices hm-rpc.3 2021-10-13 19:25:15.304 info xmlrpc <- listDevices ["ubuntu:hm-rpc.3"] hm-rpc.3 2021-10-13 19:24:45.281 info xmlrpc client is trying to connect to 192.168.0.72:49292/groups/ with ["http://192.168.0.71:49292","ubuntu:hm-rpc.3"] hm-rpc.3 2021-10-13 19:24:45.281 info xmlrpc server is trying to listen on 192.168.0.71:49292 hm-rpc.3 2021-10-13 19:24:45.194 info starting. Version 1.14.45 in /opt/iobroker/node_modules/iobroker.hm-rpc, node: v16.11.1, js-controller: 3.3.18 hm-rpc.3 2021-10-13 19:24:41.097 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason hm-rpc.3 2021-10-13 19:24:41.096 info terminating hm-rpc.3 2021-10-13 19:24:41.096 info Disconnected hm-rpc.3 2021-10-13 19:24:41.091 info xmlrpc -> 192.168.0.72:49292/groups/ init ["http://192.168.0.71:49292",""] hm-rpc.3 2021-10-13 19:24:41.091 info Got terminate signal TERMINATE_YOURSELF hm-rpc.3 2021-10-13 19:24:06.884 info Connected hm-rpc.3 2021-10-13 19:23:56.891 info xmlrpc -> 0 devices hm-rpc.3 2021-10-13 19:23:56.887 info xmlrpc <- listDevices ["ubuntu:hm-rpc.3"] hm-rpc.3 2021-10-13 19:23:26.864 info xmlrpc client is trying to connect to 192.168.0.72:49292/groups/ with ["http://192.168.0.71:49292","ubuntu:hm-rpc.3"] hm-rpc.3 2021-10-13 19:23:26.863 info xmlrpc server is trying to listen on 192.168.0.71:49292 hm-rpc.3 2021-10-13 19:23:26.782 info starting. Version 1.14.45 in /opt/iobroker/node_modules/iobroker.hm-rpc, node: v16.11.1, js-controller: 3.3.18 hm-rpc.3 2021-10-13 19:23:22.709 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason hm-rpc.3 2021-10-13 19:23:22.708 info terminating hm-rpc.3 2021-10-13 19:23:22.708 info Disconnected hm-rpc.3 2021-10-13 19:23:22.703 info xmlrpc -> 192.168.0.72:49292/groups/ init ["http://192.168.0.71:49292",""] hm-rpc.3 2021-10-13 19:23:22.702 info Got terminate signal TERMINATE_YOURSELFhm-rpc.2
-
@homoran said in Namensauflösung Homematic -> iobroker?:
@brainjourney sagte in Namensauflösung Homematic -> iobroker?:
ich nehme an du meinst hm-rpc.0
ich meinte eigentlich alle, aber das ist ein Anfang, da das Problem ja überall auftritt, oder?
Das ist aber nicht das debug log.
Dazu bitte unter der Instanz die Logstufe von Info auf debaug stellenIch glaube das wars.
hm-rpc.0
hm-rpc.0 2021-10-13 19:32:12.857 info new HMIP devices/channels after filter: 0 hm-rpc.0 2021-10-13 19:32:12.821 info xmlrpc <- newDevices 332 hm-rpc.0 2021-10-13 19:32:12.615 info xmlrpc -> 0 devices hm-rpc.0 2021-10-13 19:32:12.568 info xmlrpc <- listDevices ["ubuntu:hm-rpc.0"] hm-rpc.0 2021-10-13 19:32:12.564 info Connected hm-rpc.0 2021-10-13 19:32:12.548 info xmlrpc client is trying to connect to 192.168.0.72:2010/ with ["http://192.168.0.71:2010","ubuntu:hm-rpc.0"] hm-rpc.0 2021-10-13 19:32:12.548 info xmlrpc server is trying to listen on 192.168.0.71:2010 hm-rpc.0 2021-10-13 19:32:12.436 info starting. Version 1.14.45 in /opt/iobroker/node_modules/iobroker.hm-rpc, node: v16.11.1, js-controller: 3.3.18 hm-rpc.0 2021-10-13 19:32:08.355 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason hm-rpc.0 2021-10-13 19:32:08.354 info terminating hm-rpc.0 2021-10-13 19:32:08.354 info Disconnected hm-rpc.0 2021-10-13 19:32:08.349 info xmlrpc -> 192.168.0.72:2010/ init ["http://192.168.0.71:2010",""] hm-rpc.0 2021-10-13 19:32:08.349 info Got terminate signal TERMINATE_YOURSELF hm-rpc.0 2021-10-13 19:31:46.619 warn State value to set for "hm-rpc.0.000A1709AF4928.1.ACTIVE_PROFILE" has value "8" greater than max "3" hm-rpc.0 2021-10-13 19:28:58.878 warn State value to set for "hm-rpc.0.000A1709AF4928.1.ACTIVE_PROFILE" has value "8" greater than max "3" hm-rpc.0 2021-10-13 19:27:12.986 warn State value to set for "hm-rpc.0.000A1A499B93FF.1.ACTIVE_PROFILE" has value "8" greater than max "3"hm-rpc.1
hm-rpc.1 2021-10-13 19:20:29.977 error Init not possible, going to stop: write EPROTO 140390935717824:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:19:28.768 error Cannot call init: [http://192.168.0.71:2001, ""] write EPROTO 140392379709376:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:19:28.753 error Init not possible, going to stop: write EPROTO 140392379709376:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:18:58.765 error Init not possible, going to stop: write EPROTO 140392379709376:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:17:57.470 error Cannot call init: [http://192.168.0.71:2001, ""] write EPROTO 140452453590976:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:17:57.455 error Init not possible, going to stop: write EPROTO 140452453590976:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:17:27.466 error Init not possible, going to stop: write EPROTO 140452453590976:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:16:26.247 error Cannot call init: [http://192.168.0.71:2001, ""] write EPROTO 139973341562816:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:16:26.232 error Init not possible, going to stop: write EPROTO 139973341562816:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:15:56.243 error Init not possible, going to stop: write EPROTO 139973341562816:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:14:54.955 error Cannot call init: [http://192.168.0.71:2001, ""] write EPROTO 140246586849216:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:14:54.940 error Init not possible, going to stop: write EPROTO 140246586849216:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:14:24.951 error Init not possible, going to stop: write EPROTO 140246586849216:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:13:23.782 error Cannot call init: [http://192.168.0.71:2001, ""] write EPROTO 140392389863360:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:13:23.767 error Init not possible, going to stop: write EPROTO 140392389863360:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:12:53.778 error Init not possible, going to stop: write EPROTO 140392389863360:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:11:52.558 error Cannot call init: [http://192.168.0.71:2001, ""] write EPROTO 140149473163200:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:11:52.544 error Init not possible, going to stop: write EPROTO 140149473163200:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:11:22.554 error Init not possible, going to stop: write EPROTO 140149473163200:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:10:21.340 error Cannot call init: [http://192.168.0.71:2001, ""] write EPROTO 139896671037376:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:10:21.325 error Init not possible, going to stop: write EPROTO 139896671037376:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332: hm-rpc.1 2021-10-13 19:09:51.336 error Init not possible, going to stop: write EPROTO 139896671037376:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332:hm-rpc.2
hm-rpc.2 2021-10-13 19:26:34.548 info Connected hm-rpc.2 2021-10-13 19:26:34.548 info new CUxD devices/channels after filter: 0 hm-rpc.2 2021-10-13 19:26:34.504 info binrpc -> listDevices 108 hm-rpc.2 2021-10-13 19:26:34.402 info binrpc client is trying to connect to 192.168.0.72:8701/ with ["xmlrpc_bin://192.168.0.71:8701","ubuntu:hm-rpc.2"] hm-rpc.2 2021-10-13 19:26:34.402 info binrpc server is trying to listen on 192.168.0.71:8701 hm-rpc.2 2021-10-13 19:26:34.285 info starting. Version 1.14.45 in /opt/iobroker/node_modules/iobroker.hm-rpc, node: v16.11.1, js-controller: 3.3.18 hm-rpc.2 2021-10-13 19:26:30.227 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason hm-rpc.2 2021-10-13 19:26:30.227 info terminating hm-rpc.2 2021-10-13 19:26:30.226 info Disconnected hm-rpc.2 2021-10-13 19:26:30.225 info binrpc -> 192.168.0.72:8701/ init ["xmlrpc_bin://192.168.0.71:8701",""] hm-rpc.2 2021-10-13 19:26:30.224 info Got terminate signal TERMINATE_YOURSELFhm-rps.3
hm-rpc.3 2021-10-13 19:25:25.301 info Connected hm-rpc.3 2021-10-13 19:25:15.323 info xmlrpc -> 0 devices hm-rpc.3 2021-10-13 19:25:15.304 info xmlrpc <- listDevices ["ubuntu:hm-rpc.3"] hm-rpc.3 2021-10-13 19:24:45.281 info xmlrpc client is trying to connect to 192.168.0.72:49292/groups/ with ["http://192.168.0.71:49292","ubuntu:hm-rpc.3"] hm-rpc.3 2021-10-13 19:24:45.281 info xmlrpc server is trying to listen on 192.168.0.71:49292 hm-rpc.3 2021-10-13 19:24:45.194 info starting. Version 1.14.45 in /opt/iobroker/node_modules/iobroker.hm-rpc, node: v16.11.1, js-controller: 3.3.18 hm-rpc.3 2021-10-13 19:24:41.097 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason hm-rpc.3 2021-10-13 19:24:41.096 info terminating hm-rpc.3 2021-10-13 19:24:41.096 info Disconnected hm-rpc.3 2021-10-13 19:24:41.091 info xmlrpc -> 192.168.0.72:49292/groups/ init ["http://192.168.0.71:49292",""] hm-rpc.3 2021-10-13 19:24:41.091 info Got terminate signal TERMINATE_YOURSELF hm-rpc.3 2021-10-13 19:24:06.884 info Connected hm-rpc.3 2021-10-13 19:23:56.891 info xmlrpc -> 0 devices hm-rpc.3 2021-10-13 19:23:56.887 info xmlrpc <- listDevices ["ubuntu:hm-rpc.3"] hm-rpc.3 2021-10-13 19:23:26.864 info xmlrpc client is trying to connect to 192.168.0.72:49292/groups/ with ["http://192.168.0.71:49292","ubuntu:hm-rpc.3"] hm-rpc.3 2021-10-13 19:23:26.863 info xmlrpc server is trying to listen on 192.168.0.71:49292 hm-rpc.3 2021-10-13 19:23:26.782 info starting. Version 1.14.45 in /opt/iobroker/node_modules/iobroker.hm-rpc, node: v16.11.1, js-controller: 3.3.18 hm-rpc.3 2021-10-13 19:23:22.709 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason hm-rpc.3 2021-10-13 19:23:22.708 info terminating hm-rpc.3 2021-10-13 19:23:22.708 info Disconnected hm-rpc.3 2021-10-13 19:23:22.703 info xmlrpc -> 192.168.0.72:49292/groups/ init ["http://192.168.0.71:49292",""] hm-rpc.3 2021-10-13 19:23:22.702 info Got terminate signal TERMINATE_YOURSELFhm-rpc.2
Der Adapter 1 Läuft nicht, ich habe dort noch einen Adapter Stromzähler von ELV den ich nicht aus der Konfiguratiom bekomme um den neu Anzulernen aber in der Kopie der Homatickonfieruragtion mit dabei stand.Ich nehme an daran liegt das wohl. Aso nicht im iobroker Auftaucht
-
Der Adapter 1 Läuft nicht, ich habe dort noch einen Adapter Stromzähler von ELV den ich nicht aus der Konfiguratiom bekomme um den neu Anzulernen aber in der Kopie der Homatickonfieruragtion mit dabei stand.Ich nehme an daran liegt das wohl. Aso nicht im iobroker Auftaucht
Hast du unsere Fragen / Andeutung oben nicht gelesen !?
-
Hast du unsere Fragen / Andeutung oben nicht gelesen !?
@glasfaser said in Namensauflösung Homematic -> iobroker?:
Hast du unsere Fragen / Andeutung oben nicht gelesen !?
npm 8.0.0
node v16.11.1 -
@glasfaser said in Namensauflösung Homematic -> iobroker?:
Hast du unsere Fragen / Andeutung oben nicht gelesen !?
npm 8.0.0
node v16.11.1Gebe mal alles :
which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs -
Gebe mal alles :
which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs@glasfaser said in Namensauflösung Homematic -> iobroker?:
which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs
/usr/bin/nodejs
v16.11.1
/usr/bin/node
v16.11.1
/usr/bin/npm
8.0.0
nodejs:
Installiert: 16.11.1-1nodesource1
Installationskandidat: 16.11.1-1nodesource1
Versionstabelle:
*** 16.11.1-1nodesource1 500
500 https://deb.nodesource.com/node_16.x bionic/main amd64 Packages
100 /var/lib/dpkg/status
8.10.0~dfsg-2ubuntu0.4 500
500 http://de.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 Pa ckages
8.10.0~dfsg-2ubuntu0.2 500
500 http://security.ubuntu.com/ubuntu bionic-security/universe amd64 Pac kages
8.10.0~dfsg-2 500
500 http://de.archive.ubuntu.com/ubuntu bionic/universe amd64 Packages -
@brainjourney sagte in Namensauflösung Homematic -> iobroker?:
ssl3_get_record:wrong version number
Ich kenne den Fehler nicht , kann aber eventuell mit deiner installierten Version zusammenhängen .
EDIT:
Falls jemand bereits mit Node.js 16.x arbeiten möchte, dann bitte im Moment AUSSCHLIESSLICH mit npm 6 !!https://forum.iobroker.net/topic/46758/js-controller-3-3-jetzt-im-stable
-
@glasfaser said in Namensauflösung Homematic -> iobroker?:
which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs
/usr/bin/nodejs
v16.11.1
/usr/bin/node
v16.11.1
/usr/bin/npm
8.0.0
nodejs:
Installiert: 16.11.1-1nodesource1
Installationskandidat: 16.11.1-1nodesource1
Versionstabelle:
*** 16.11.1-1nodesource1 500
500 https://deb.nodesource.com/node_16.x bionic/main amd64 Packages
100 /var/lib/dpkg/status
8.10.0~dfsg-2ubuntu0.4 500
500 http://de.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 Pa ckages
8.10.0~dfsg-2ubuntu0.2 500
500 http://security.ubuntu.com/ubuntu bionic-security/universe amd64 Pac kages
8.10.0~dfsg-2 500
500 http://de.archive.ubuntu.com/ubuntu bionic/universe amd64 PackagesIch würde da auch auf node12, maximal node14 gehen.
-
Ich würde da auch auf node12, maximal node14 gehen.
@thomas-braun said in Namensauflösung Homematic -> iobroker?:
Ich würde da auch auf node12, maximal node14 gehen.
Sorry wenn ich das jetzt wiederholt schreibe.
Das alles läuft auf einem anderen Rechner pi4 mit VCCU also (iobroker und Homematic) alles bestens und ohne Fehler. -
@homoran said in Namensauflösung Homematic -> iobroker?:
@brainjourney was steht jeweils in den Zusätzlichen Einstellungen?
insbesondere als Callback-Adresse?Da habe ich nichts drin
was steht in der RaspberryMatic-Firewall?
und was steht im debug-Log beim restart der Instanzen?
ich nehme an du meinst hm-rpc.0
m-rpc.0 2021-10-13 19:09:06.855 info new HMIP devices/channels after filter: 0 hm-rpc.0 2021-10-13 19:09:06.816 info xmlrpc <- newDevices 332 hm-rpc.0 2021-10-13 19:09:06.539 info xmlrpc -> 0 devices hm-rpc.0 2021-10-13 19:09:06.497 info xmlrpc <- listDevices ["ubuntu:hm-rpc.0"] hm-rpc.0 2021-10-13 19:09:06.493 info Connected hm-rpc.0 2021-10-13 19:09:06.481 info xmlrpc client is trying to connect to 192.168.0.72:2010/ with ["http://192.168.0.71:2010","ubuntu:hm-rpc.0"] hm-rpc.0 2021-10-13 19:09:06.480 info xmlrpc server is trying to listen on 192.168.0.71:2010 hm-rpc.0 2021-10-13 19:09:06.366 info starting. Version 1.14.45 in /opt/iobroker/node_modules/iobroker.hm-rpc, node: v16.11.1, js-controller: 3.3.18@brainjourney sagte in Namensauflösung Homematic -> iobroker?:
@homoran said in Namensauflösung Homematic -> iobroker?:
@brainjourney was steht jeweils in den Zusätzlichen Einstellungen?
insbesondere als Callback-Adresse?Da habe ich nichts drin
Dann trage mal dort die IP Adresse ein .
-
@thomas-braun said in Namensauflösung Homematic -> iobroker?:
Ich würde da auch auf node12, maximal node14 gehen.
Sorry wenn ich das jetzt wiederholt schreibe.
Das alles läuft auf einem anderen Rechner pi4 mit VCCU also (iobroker und Homematic) alles bestens und ohne Fehler.@brainjourney sagte in Namensauflösung Homematic -> iobroker?:
Sorry wenn ich das jetzt wiederholt schreibe.
Auch wiederholt:
node16 und insbesondere npm>6 läuft noch nicht ganz rund zusammen mit dem ioBroker. Diese Konstellationen sollte man nur zum Testen verwenden.
695
Online32.6k
Benutzer82.0k
Themen1.3m
Beiträge