(gelöst)Nut fehler

ostseereiter

Hallo Freunde,
es funktioniert ja alles soweit aber wenn ich mich auf der Konsole einlogge bekomme ich diese Meldung.

UPS serverups@localhost is unavailable

Was kann ich da tun um den Localhost wieder verfügbar zu machen.

Asgothian

@ostseereiter

Ich weiss nicht was die Meldung die du postest im Detail bedeutet. Ich gehe aber davon aus das der "localhost", sprich der Rechner auf dem du dich eingeloggt hast auch verfügbar ist. Das ist also nicht das problem. Ob das stimmt kannst du einfach durch ein

ping localhost

auf der Konsole verifizieren.

Des weiteren gehe ich mal davon aus das das System eine UPS besitzt / erwartet. Die Meldung könnte besagen das der dazu gehörende Systemdienst mit dieser nicht kommunizieren kann.

Ob diese Annahme korrekt ist müsstest Du sagen. Mehr Informationen sind auf jeden Fall notwendig.

A.

ostseereiter

@asgothian
also ich weiß auch nicht wie es aussieht findet er die UPS nicht. Die Frage ist Warum?

 localhost ping statistics ---
112 packets transmitted, 112 received, 0% packet loss, time 757ms
rtt min/avg/max/mdev = 0.072/0.106/0.231/0.027 ms

nach der Eingabe von sudo upsd

Network UPS Tools upsd 2.7.4
Fatal error: A previous upsd instance is already running!
Either stop the previous instance first, or use the 'reload' command.

sudo upsc ups@localhost

Fatal error: A previous upsd instance is already running!
Either stop the previous instance first, or use the 'reload' command.

Asgothian

@ostseereiter

was für ein System ?
wie ist der upsd konfiguriert ?
was passiert bei sudo systemctl upsd restart ?

A.

ostseereiter

@asgothian sagte in Nut fehler:

sudo systemctl

Debian System da daruf ist der Nut-server.

[sudo] Passwort für andy:
  UNIT                        LOAD   ACTIVE SUB       DESCRIPTION
  proc-sys-fs-binfmt_misc.automount loaded active waiting   Arbitrary Executable
  sys-devices-pci0000:00-0000:00:01.1-sound-card0.device loaded active plugged
  sys-devices-pci0000:00-0000:00:11.0-ata3-host2-target2:0:0-2:0:0:0-block-sda-s
  sys-devices-pci0000:00-0000:00:11.0-ata3-host2-target2:0:0-2:0:0:0-block-sda-s
  sys-devices-pci0000:00-0000:00:11.0-ata3-host2-target2:0:0-2:0:0:0-block-sda-s
  sys-devices-pci0000:00-0000:00:11.0-ata3-host2-target2:0:0-2:0:0:0-block-sda.d
  sys-devices-pci0000:00-0000:00:12.0-usb2-2\x2d4-2\x2d4:1.0-tty-ttyACM0.device
  sys-devices-pci0000:00-0000:00:12.2-usb1-1\x2d1-1\x2d1:1.0-host3-target3:0:0-3
  sys-devices-pci0000:00-0000:00:12.2-usb1-1\x2d1-1\x2d1:1.0-host3-target3:0:0-3
  sys-devices-pci0000:00-0000:00:14.2-sound-card1.device loaded active plugged
  sys-devices-pci0000:00-0000:00:15.2-0000:03:00.0-net-enp3s0.device loaded acti
  sys-devices-pci0000:00-0000:00:15.3-0000:04:00.0-usb3-3\x2d1-3\x2d1:1.0-blueto
  sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged   /sys/
  sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged   /sys/
  sys-devices-pnp0-00:07-tty-ttyS0.device loaded active plugged   /sys/devices/p
  sys-devices-pnp0-00:08-tty-ttyS1.device loaded active plugged   /sys/devices/p
  sys-devices-virtual-misc-rfkill.device loaded active plugged   /sys/devices/vi
  sys-subsystem-bluetooth-devices-hci0.device loaded active plugged   /sys/subsy
  sys-subsystem-net-devices-enp3s0.device loaded active plugged   NetLink BCM577
  -.mount                     loaded active mounted   Root Mount
  boot-efi.mount              loaded active mounted   /boot/efi
  dev-hugepages.mount         loaded active mounted   Huge Pages File System
lines 1-23...skipping...
  UNIT                        LOAD   ACTIVE SUB       DESCRIPTION
  proc-sys-fs-binfmt_misc.automount loaded active waiting   Arbitrary Executable File
  sys-devices-pci0000:00-0000:00:01.1-sound-card0.device loaded active plugged   Wrestler HDMI Audio
  sys-devices-pci0000:00-0000:00:11.0-ata3-host2-target2:0:0-2:0:0:0-block-sda-sda1.device loaded active plugged   TCSUNBOW_X1_32GB 1
  sys-devices-pci0000:00-0000:00:11.0-ata3-host2-target2:0:0-2:0:0:0-block-sda-sda2.device loaded active plugged   TCSUNBOW_X1_32GB 2
  sys-devices-pci0000:00-0000:00:11.0-ata3-host2-target2:0:0-2:0:0:0-block-sda-sda3.device loaded active plugged   TCSUNBOW_X1_32GB 3
  sys-devices-pci0000:00-0000:00:11.0-ata3-host2-target2:0:0-2:0:0:0-block-sda.device loaded active plugged   TCSUNBOW_X1_32GB
  sys-devices-pci0000:00-0000:00:12.0-usb2-2\x2d4-2\x2d4:1.0-tty-ttyACM0.device loaded active plugged   SB7x0/SB8x0/SB9x0 USB OHC
  sys-devices-pci0000:00-0000:00:12.2-usb1-1\x2d1-1\x2d1:1.0-host3-target3:0:0-3:0:0:0-block-sdb-sdb1.device loaded active plugged   External_USB_3.0 INTENSO
  sys-devices-pci0000:00-0000:00:12.2-usb1-1\x2d1-1\x2d1:1.0-host3-target3:0:0-3:0:0:0-block-sdb.device loaded active plugged   External_USB_3.0
  sys-devices-pci0000:00-0000:00:14.2-sound-card1.device loaded active plugged   SBx00 Azalia (Intel HDA)
  sys-devices-pci0000:00-0000:00:15.2-0000:03:00.0-net-enp3s0.device loaded active plugged   NetLink BCM57781 Gigabit
  sys-devices-pci0000:00-0000:00:15.3-0000:04:00.0-usb3-3\x2d1-3\x2d1:1.0-bluetooth-hci0.device loaded active plugged   /sys/devices/pci0000:00/0
  sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged   /sys/devices/platform/ser
  sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged   /sys/devices/platform/ser
  sys-devices-pnp0-00:07-tty-ttyS0.device loaded active plugged   /sys/devices/pnp0/00:07/t
  sys-devices-pnp0-00:08-tty-ttyS1.device loaded active plugged   /sys/devices/pnp0/00:08/t
  sys-devices-virtual-misc-rfkill.device loaded active plugged   /sys/devices/virtual/misc
  sys-subsystem-bluetooth-devices-hci0.device loaded active plugged   /sys/subsystem/bluetooth/
  sys-subsystem-net-devices-enp3s0.device loaded active plugged   NetLink BCM57781 Gigabit
  -.mount                     loaded active mounted   Root Mount
  boot-efi.mount              loaded active mounted   /boot/efi
  dev-hugepages.mount         loaded active mounted   Huge Pages File System
  dev-mqueue.mount            loaded active mounted   POSIX Message Queue File
  run-user-1000.mount         loaded active mounted   /run/user/1000
  sys-kernel-debug.mount      loaded active mounted   Kernel Debug File System
  systemd-ask-password-console.path loaded active waiting   Dispatch Password Request
  systemd-ask-password-wall.path loaded active waiting   Forward Password Requests
  init.scope                  loaded active running   System and Service Manage
  session-40.scope            loaded active running   Session 40 of user andy
  apparmor.service            loaded active exited    Load AppArmor profiles
  bluetooth.service           loaded active running   Bluetooth service
  console-setup.service       loaded active exited    Set console font and keym
  cron.service                loaded active running   Regular background progra
  dbus.service                loaded active running   D-Bus System Message Bus
  getty@tty1.service          loaded active running   Getty on tty1
  grafana-server.service      loaded active running   Grafana instance
  ifup@enp3s0.service         loaded active exited    ifup for enp3s0
  ifupdown-pre.service        loaded active exited    Helper to synchronize boo
  influxdb.service            loaded active running   InfluxDB is an open-sourc
  iobroker.service            loaded active running   ioBroker Server
  keyboard-setup.service      loaded active exited    Set the console keyboard
  kmod-static-nodes.service   loaded active exited    Create list of required s
  networking.service          loaded active exited    Raise network interfaces
● nut-driver.service          loaded failed failed    Network UPS Tools - power
  nut-monitor.service         loaded active running   Network UPS Tools - power
  nut-server.service          loaded active running   Network UPS Tools - power
  rsyslog.service             loaded active running   System Logging Service
  ssh.service                 loaded active running   OpenBSD Secure Shell serv

andy@debian:~$ sudo upsd restart
Network UPS Tools upsd 2.7.4
Fatal error: A previous upsd instance is already running!
Either stop the previous instance first, or use the 'reload' command.

ostseereiter

Wenn ich dann den Treiber starten will

andy@debian:~$  sudo upsdrvctl start
[sudo] Passwort für andy:
Network UPS Tools - UPS driver controller 2.7.4
Network UPS Tools - Generic HID driver 0.41 (2.7.4)
USB communication driver 0.33
No matching HID UPS found
Driver failed to start (exit status=1)

ostseereiter

Bin ich ein Depp ich habe den falschen USB-Stecker an den Server angeschlossen.
Ich glaube das war es.

Community Forum

NEWS

(gelöst)Nut fehler

Support us

463

32.9k

83.1k

1.3m