NEWS
Aldes InspirAir Home Premium - Modbus RTU
-
Hallo zusammen,
ich habe für meine oben genannte Lüftungsanlage nun endlich vom Hersteller die Modbus Dokumentation bekommen. Leider kenne ich mich mit Modbus nicht wirklich aus und weiß nicht was ich im modbus Adapter eintragen muss um die Lüftungsanlage über Iobroker abfragen und steuern zu können. Wäre vielleicht jemand bereit mir hierbei zu helfen und die notwendigen Einstellungen für den Adapter zu erstellen sodass ich diese importieren kann? Oder auch eine Erklärung/Beispiele für den ein oder anderen Datenpunkt.
Modbus Adressliste Inspirair.pdf
Vielen lieben Dank im Voraus für jede Hilfe!!!
-
Ich habe die Kommunikation nun soweit mit modpoll per Konsole getestet und bekomme über folgenden Befehl eine Antwort:
smarthome@smarthome:~$ sudo mbpoll -a 2 -b 115200 -t 4 -r 350 -c 2 /dev/ttyUSB0 mbpoll 1.4-12 - FieldTalk(tm) Modbus(R) Master Simulator Copyright © 2015-2019 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Protocol configuration: Modbus RTU Slave configuration...: address = [2] start reference = 350, count = 2 Communication.........: /dev/ttyUSB0, 115200-8E1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table -- Polling slave 2... Ctrl-C to stop) Read output (holding) register failed: Connection timed out -- Polling slave 2... Ctrl-C to stop) Read output (holding) register failed: Connection timed out -- Polling slave 2... Ctrl-C to stop) Read output (holding) register failed: Connection timed out -- Polling slave 2... Ctrl-C to stop) Read output (holding) register failed: Connection timed out -- Polling slave 2... Ctrl-C to stop) [350]: 33759 (-31777) [351]: 1905 -- Polling slave 2... Ctrl-C to stop) ^C--- /dev/ttyUSB0 poll statistics --- 6 frames transmitted, 1 received, 4 errors, 83.3% frame loss everything was closed. Have a nice day !
Im Modbus Adapter habe ich folgende Einstellungen vorgenommen:
Bekomme dabei aber folgende Fehler:
Was läuft hier falsch bzw. was habe ich falsch eingestellt?
-
@ck_coke
Ich habe meine Config hier beschrieben:
https://forum.iobroker.net/post/650719