Weihnachtsangebot 2025! 🎄

[Thomas Braun]

@Mr-X
Für dein akutes Problem bringt dir das ganz sicher nichts. Aber ist halt Prophylaxe für andere Dinge.

sudo systemctl set-default multi-user.target
sudo reboot

sind die Befehle um RL3 permanent einzurichten.

[Mr.X]

Achso OK.
habe ich mal ausgeführt, aber dann spare ich mir erstmal das Dow und upgrade gehampel.
Gestern musste ich ein Backup einspielen, weil das dann doch nicht lief.

[Thomas Braun]

@Mr-X
Willst du dann jetzt noch weiter nach der eigentlichen Ursache schauen?

[Mr.X]

@Thomas-Braun Eigentlich schon, hast du denn weitere Idee/Ansätze.
Habe zwar bei Arteck einen neuen Stick bestellt, aber bis dahin könnte das ganze hier ja funktionieren.

[Thomas Braun]

@Mr-X
Dann müssen wir erstmal schauen, auf was wir da genau rumtanzen:

which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs && whoami && who -r

sudo apt update
sudo apt dist-upgrade

iobroker update
iobroker upgrade

[Mr.X]

@Thomas-Braun

pi@raspberrypi:~ $ which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs && whoami && who -r
/usr/bin/nodejs
v12.20.0
/usr/bin/node
v12.20.0
/usr/bin/npm
6.14.8
nodejs:
  Installed: 12.20.0-1nodesource1
  Candidate: 12.20.0-1nodesource1
  Version table:
 *** 12.20.0-1nodesource1 500
        500 https://deb.nodesource.com/node_12.x buster/main armhf Packages
        100 /var/lib/dpkg/status
     10.21.0~dfsg-1~deb10u1+rpi1 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages
pi
         run-level 5  2020-12-14 22:34

alles andere auch erledigt.
dann war der Adapter grün, nichts reagier.
Stick abgezogen, gewarten und dann ein reboot.

Im log kam zunächst

zigbee.0
2020-12-15 20:23:33.945
info
(1806) Installed Version: iobroker.zigbee@1.4.0
zigbee.0
2020-12-15 20:23:33.701
info
(1806) Starting Zigbee npm ...
zigbee.0
2020-12-15 20:23:33.513
info
(1806) starting. Version 1.4.0 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.20.0, js-controller: 3.1.6

Hier dann der letzte log auszug:

zigbee.0
2020-12-15 20:24:03.934
error
at /opt/iobroker/node_modules/iobroker.zigbee/node_modules/@serialport/stream/lib/index.js:242:12
zigbee.0
2020-12-15 20:24:03.934
error
at SerialPort._error (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/@serialport/stream/lib/index.js:198:14)
zigbee.0
2020-12-15 20:24:03.934
error
at SerialPort.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:134:49)
zigbee.0
2020-12-15 20:24:03.934
error
at __awaiter (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:23:12)
zigbee.0
2020-12-15 20:24:03.934
error
at new Promise (<anonymous>)
zigbee.0
2020-12-15 20:24:03.934
error
at /opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:27:71
zigbee.0
2020-12-15 20:24:03.934
error
at Generator.next (<anonymous>)
zigbee.0
2020-12-15 20:24:03.934
error
at Znp.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:136:32)
zigbee.0
2020-12-15 20:24:03.934
error
(1806) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'
zigbee.0
2020-12-15 20:24:03.933
error
(1806) Failed to start Zigbee
zigbee.0
2020-12-15 20:24:03.721
info
(1806) Installed Version: iobroker.zigbee@1.4.0
zigbee.0
2020-12-15 20:24:03.706
info
(1806) Starting Zigbee npm ...
zigbee.0
2020-12-15 20:24:03.705
info
(1806) Try to reconnect. 1 attempts left
zigbee.0
2020-12-15 20:23:53.704
error
at rejected (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:25:65)
zigbee.0
2020-12-15 20:23:53.704
error
at Generator.throw (<anonymous>)
zigbee.0
2020-12-15 20:23:53.704
error
at ZStackAdapter.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:94:31)
zigbee.0
2020-12-15 20:23:53.704
error
(1806) Error: Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)
zigbee.0
2020-12-15 20:23:53.703
error
(1806) Failed to start Zigbee

[Thomas Braun]

@Mr-X Lass den Stick immer stecken! Was ist das genau für eine Hardware?

lsusb -v

Wie verhält es sich, wenn du das System sauber rebootest?

sudo reboot

[Mr.X]

@Thomas-Braun

Bus 002 Device 002: ID 0781:5581 SanDisk Corp. Ultra
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         9
  idVendor           0x0781 SanDisk Corp.
  idProduct          0x5581 Ultra
  bcdDevice            1.00
  iManufacturer           1
  iProduct                2
  iSerial                 3
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x002c
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              896mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0
  bDeviceProtocol         3
  bMaxPacketSize0         9
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0003 3.0 root hub
  bcdDevice            5.04
  iManufacturer           3
  iProduct                2
  iSerial                 1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x001f
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
        bMaxBurst               0

Bus 001 Device 003: ID 0451:16a8 Texas Instruments, Inc.
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            2 Communications
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        32
  idVendor           0x0451 Texas Instruments, Inc.
  idProduct          0x16a8
  bcdDevice            0.09
  iManufacturer           1
  iProduct                2
  iSerial                 3
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0043
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower               50mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1
      CDC Call Management:
        bmCapabilities       0x00
        bDataInterface          1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval              64
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0

Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x2109 VIA Labs, Inc.
  idProduct          0x3431 Hub
  bcdDevice            4.21
  iManufacturer           0
  iProduct                1
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0019
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            5.04
  iManufacturer           3
  iProduct                2
  iSerial                 1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0019
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12

[Mr.X]

Das kommt nach einen reboot im Log:
Adapter ist nun grün. aber nach 10min. bis 1 Stunde wird der gelb

zigbee.0
2020-12-15 21:25:16.898
error
(1805) Device 0x90fd9ffffe8a09d4 "undefined" not described in statesMapping.
zigbee.0
2020-12-15 21:25:16.676
info
(1805) Zigbee started
zigbee.0
2020-12-15 21:25:16.675
info
(1805) 0xbc33acfffe0ebcf2 (addr 65202): HG06337 - Lidl Silvercrest smart plug (Router)
zigbee.0
2020-12-15 21:25:16.667
info
(1805) 0xbc33acfffe0ebd34 (addr 45265): HG06337 - Lidl Silvercrest smart plug (Router)
zigbee.0
2020-12-15 21:25:16.664
info
(1805) 0x842e14fffe556652 (addr 44502): HG06338 - Lidl Silvercrest 3 gang switch, possibly with USB (Router)
zigbee.0
2020-12-15 21:25:16.661
info
(1805) 0x0017880108b7ba14 (addr 55123): 8718699673147 - Philips Hue white A60 bulb E27 bluetooth (Router)
zigbee.0
2020-12-15 21:25:16.659
info
(1805) 0x90fd9ffffe8a09d4 (addr 21330): Not supported (model undefined)(Unknown)
zigbee.0
2020-12-15 21:25:16.658
info
(1805) 0x000b57fffec367c3 (addr 26913): LED1545G12 - IKEA TRADFRI LED bulb E26/E27 980 lumen, dimmable, white spectrum, opal white (Router)
zigbee.0
2020-12-15 21:25:16.656
info
(1805) 0x00158d0004041f71 (addr 53371): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
zigbee.0
2020-12-15 21:25:16.654
info
(1805) 0x005043c903241a3e (addr 47918): HS1SA - HEIMAN Smoke detector (EndDevice)
zigbee.0
2020-12-15 21:25:16.651
info
(1805) 0x005043c9032455a3 (addr 41038): HS1SA - HEIMAN Smoke detector (EndDevice)
zigbee.0
2020-12-15 21:25:16.650
info
(1805) 0x005043c90324538e (addr 39166): HS1SA - HEIMAN Smoke detector (EndDevice)
zigbee.0
2020-12-15 21:25:16.648
info
(1805) 0x005043c903245474 (addr 6269): HS1SA - HEIMAN Smoke detector (EndDevice)
zigbee.0
2020-12-15 21:25:16.646
info
(1805) 0x005043c903386694 (addr 44701): HS1SA - HEIMAN Smoke detector (EndDevice)
zigbee.0
2020-12-15 21:25:16.644
info
(1805) 0x00158d0004042192 (addr 65354): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
zigbee.0
2020-12-15 21:25:16.643
info
(1805) 0x000b57fffec1f6ec (addr 28034): E1524/E1810 - IKEA TRADFRI remote control (EndDevice)
zigbee.0
2020-12-15 21:25:16.640
info
(1805) 0x000b57fffe9e650d (addr 38936): ICPSHC24-30EU-IL-1 - IKEA TRADFRI driver for wireless control (30 watt) (Router)
zigbee.0
2020-12-15 21:25:16.637
info
(1805) 0x000b57fffe2b7dea (addr 5574): ICTC-G-1 - IKEA TRADFRI wireless dimmer (EndDevice)
zigbee.0
2020-12-15 21:25:16.635
info
(1805) 0x84182600000f74b5 (addr 9139): AC03641 - OSRAM LIGHTIFY LED Classic A60 clear (Router)
zigbee.0
2020-12-15 21:25:16.633
info
(1805) 0x90fd9ffffe6d32bc (addr 34524): LED1546G12 - IKEA TRADFRI LED bulb E26/E27 950 lumen, dimmable, white spectrum, clear (Router)
zigbee.0
2020-12-15 21:25:16.631
info
(1805) 0x00158d0003f045f4 (addr 42828): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
zigbee.0
2020-12-15 21:25:16.629
info
(1805) 0x00158d0004252ae8 (addr 42379): WSDCGQ01LM - Xiaomi MiJia temperature & humidity sensor (EndDevice)
zigbee.0
2020-12-15 21:25:16.627
info
(1805) 0x00158d000425298b (addr 62172): WSDCGQ01LM - Xiaomi MiJia temperature & humidity sensor (Unknown)
zigbee.0
2020-12-15 21:25:16.625
info
(1805) 0x00158d0002a374e8 (addr 51270): MFKZQ01LM - Xiaomi Mi/Aqara smart home cube (EndDevice)
zigbee.0
2020-12-15 21:25:16.617
info
(1805) 0x00158d00041cd4e6 (addr 37917): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
zigbee.0
2020-12-15 21:25:16.603
info
(1805) Currently 23 devices are joined:
zigbee.0
2020-12-15 21:25:16.592
info
(1805) --> transmitPower : high
zigbee.0
2020-12-15 21:25:16.578
info
(1805) Coordinator firmware version: {"type":"zStack12","meta":{"transportrev":2,"product":0,"majorrel":2,"minorrel":6,"maintrel":3,"revision":20190223}}

[Thomas Braun]

@Mr-X Das System liegt auf dem SanDisk Datenträger? Boot über USB?

[Mr.X]

@Thomas-Braun Ja, genau.
Und grün wurde er erst jetzt nach dem zweiten boot.
Momentan geht's, auch die Lidl Sachen.
Sobald ich merke dass er aussteigt, kann ich den Log posten.
Drehe jetzt ne Runde mit Doggi, und wenn ich wieder komme ist meist alles platt.

[Thomas Braun]

@Mr-X Das ist der 2531-Stick, oder? Der kann mit 23 Geräten überfordert sein.

[Mr.X]

@Thomas-Braun Ja, das stimmt.
Mich wundert aber dass dann mit 1.3.1 alles läuft.
habe jetzt 3 Lidl Sachen angelernt, davor lief alles Tipi topi unter 1.3.1

[Thomas Braun]

@Mr-X Kann ja sein, dass die drei neuen Geräte genau die drei sind, bei denen der Stick ausgereizt ist.

[Mr.X]

@Thomas-Braun und das würde dann die errors kreieren?
Könnte jetzt noch die drei neue löschen und auf 1.4 bleiben.
Danke

[Thomas Braun]

@Mr-X Nicht alle.

[Mr.X]

@Thomas-Braun
So, da wären wir wieder.
Ich habe gestern drei Geräte gelöscht. Gestern abend und heute früh vor der Arbeit lief alles.
Nun habe ich eben nachgeschaut: Adapter gelb.
Nach dem Adapter Neustart kommt das:

zigbee.0	2020-12-16 11:19:50.275	info	(1803) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
zigbee.0	2020-12-16 11:19:50.274	info	(1803) terminating
zigbee.0	2020-12-16 11:19:50.273	error	at /opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:27:71)
zigbee.0	2020-12-16 11:19:50.273	error	at Generator.next (<anonymous>)
zigbee.0	2020-12-16 11:19:50.273	error	at ZStackAdapter.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:453:28)
zigbee.0	2020-12-16 11:19:50.273	error	at ZStackAdapter.dataRequestExtended (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:800:16)
zigbee.0	2020-12-16 11:19:50.273	error	at __awaiter (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:23:12)
zigbee.0	2020-12-16 11:19:50.273	error	at new Promise (<anonymous>)
zigbee.0	2020-12-16 11:19:50.273	error	at /opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:27:71
zigbee.0	2020-12-16 11:19:50.273	error	at Generator.next (<anonymous>)
zigbee.0	2020-12-16 11:19:50.273	error	at ZStackAdapter.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:804:28)
zigbee.0	2020-12-16 11:19:50.273	error	at Znp.request (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:273:19)
zigbee.0	2020-12-16 11:19:50.273	error	(1803) Failed to stop zigbee (Error: Cannot request when znp has not been initialized yet
zigbee.0	2020-12-16 11:19:50.143	info	(1803) Zigbee: disabling joining new devices.
zigbee.0	2020-12-16 11:19:50.141	info	(1803) cleaned everything up...
zigbee.0	2020-12-16 11:19:50.139	info	(1803) Got terminate signal TERMINATE_YOURSELF
host.raspberrypi	2020-12-16 11:19:50.135	info	stopInstance system.adapter.zigbee.0 send kill signal
host.raspberrypi	2020-12-16 11:19:50.129	info	stopInstance system.adapter.zigbee.0 (force=false, process=true)

[Thomas Braun]

@Mr-X
Scheint mir an der Hardware zu liegen.

https://www.zigbee2mqtt.io/information/FAQ.html#modemmanager-is-installed

Was sagt eigentlich

dmesg

zu dem Stick? Irgendwo Meldungen zu undervoltage?

[Mr.X]

@Thomas-Braun Ne, nichts gesehen.
irgendwie scheint es jetzt mal einen Tag zu laufen.
Ich denke, ich belasse es erstmal so wie es ist, und warte auf den neuen Stick von Arteck.
Hoffe die Post braucht nicht allzulange.
Vielen Dank nochmals für deine Bemühungen !!!