Ble.0 Adapter bremst ganzen IObroker in 2 Min.
-
@arnold
Was heißt eigentlichgelaufen am Rpi3,aber nach dem Umzug auf Rpi4 jedoch nicht
Wie bist du denn umgezogen? OS neuinstalliert auf dem RPI4 oder nur die Karte umgesteckt?
-
-
-
Habe Neu Installation von iobroker , dann backitup instalieren und wiederherstellen mit Backitup aber datei von Rpi 3
-
@Thomas-Braun keine Besserung
-
-
Ble-0 nicht eingeschaltet
-
@arnold
Schau mal in den Objekten nach dem Datenpunkt allowNewDevices.
Der sollte auf 'false' stehen. Sonst ziehst du dir da tausende Objekte rein. -
mit Ble.0 Angeschaltet
-
 -
habe false eingetragen( Datenpunkt allowNewDevices stand auf true )
-
@arnold Das dürfte der Grund gewesen sein. Vermutlich hängen da nun ganz viele Objekte noch rum?
-
nein ich hatte noch 3 Geräte ,die habe ich gelöscht und keine Besserung
-
dmesg -
HABE vor kurzem versucht Ble.0 Adapter ans laufen zu bringen
Diesmal aber iobroker Komplet neu installiert , und auf den noch "nackten" Iobroker Ble. adapter installiert,( ist sofort auf grün geschaltet und bekommt Daten von xiaomi -Temperatur ) ABER dann bricht das System zusamen so nach ca 1-2 min .
Ble Adapter ausschalten und System läuft stabil. -
-
@arnold Keine Screenshots!
-
pi@raspberrypi4-iob:~ $ dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.4.51-v7l+ (dom@buildbot) (gcc version 4.9.3 (cros stool-NG crosstool-ng-1.22.0-88-g8460611)) #1327 SMP Thu Jul 23 11:04:39 BST 202 0 [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ec00000, s ize 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id share d-dma-pool [ 0.000000] On node 0 totalpages: 1012736 [ 0.000000] DMA zone: 2304 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 816128 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 20 pages/cpu s49856 r8192 d23872 u81920 [ 0.000000] pcpu-alloc: s49856 r8192 d23872 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1010432 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835 .enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 smsc95xx.macaddr=DC:A6:32:40:6D:89 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0 x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=ea7d04d6-02 rootfstyp e=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-s erial-consoles [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, li near) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x17cc0000-0x1bcc0000] (64MB) [ 0.000000] Memory: 3655620K/4050944K available (10240K kernel code, 725K rwd ata, 2740K rodata, 2048K init, 853K bss, 133180K reserved, 262144K cma-reserved, 3264512K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 30051 entries in 59 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jif fies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x340/0x518 wit h crng_init=0 [ 0.000008] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2 147483647500ns [ 0.000024] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_ idle_ns: 1911260446275 ns [ 0.000099] bcm2835: system timer (irq = 17) [ 0.000762] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000778] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000795] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 43980 46511102ns [ 0.000807] Switching to timer-based delay loop, resolution 18ns [ 0.001044] Console: colour dummy device 80x30 [ 0.001076] printk: console [tty1] enabled [ 0.001124] Calibrating delay loop (skipped), value calculated using timer fr equency.. 108.00 BogoMIPS (lpj=540000) [ 0.001145] pid_max: default: 32768 minimum: 301 [ 0.001455] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linea r) [ 0.001477] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002640] Disabling memory control group subsystem [ 0.002738] CPU: Testing write buffer coherency: ok [ 0.003209] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004031] Setting up static identity map for 0x200000 - 0x20003c [ 0.004218] rcu: Hierarchical SRCU implementation. [ 0.004835] smp: Bringing up secondary CPUs ... [ 0.005967] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.007221] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.008428] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.008574] smp: Brought up 1 node, 4 CPUs [ 0.008590] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.008602] CPU: All CPU(s) started in HYP mode. [ 0.008612] CPU: Virtualization extensions available. [ 0.009368] devtmpfs: initialized [ 0.022441] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.022682] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns [ 0.022708] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.030379] pinctrl core: initialized pinctrl subsystem [ 0.031451] NET: Registered protocol family 16 [ 0.035139] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.036877] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.036890] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.037209] Serial: AMBA PL011 UART driver [ 0.040601] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.060836] raspberrypi-firmware soc:firmware: Attached to firmware from 2020 -07-17 10:59, variant start [ 0.070851] raspberrypi-firmware soc:firmware: Firmware hash is 21a15cb094f41 c7506ad65d2cb9b29c550693057 [ 0.124588] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.129013] vgaarb: loaded [ 0.129461] SCSI subsystem initialized [ 0.129683] usbcore: registered new interface driver usbfs [ 0.129750] usbcore: registered new interface driver hub [ 0.129863] usbcore: registered new device driver usb [ 0.131496] clocksource: Switched to clocksource arch_sys_counter [ 0.881318] VFS: Disk quotas dquot_6.6.0 [ 0.881415] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.881612] FS-Cache: Loaded [ 0.881793] CacheFiles: Loaded [ 0.882584] simple-framebuffer: probe of 0.framebuffer failed with error -12 [ 0.892187] thermal_sys: Registered thermal governor 'step_wise' [ 0.892530] NET: Registered protocol family 2 [ 0.893252] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.893282] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.893357] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.893430] TCP: Hash tables configured (established 8192 bind 8192) [ 0.893570] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.893600] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.893840] NET: Registered protocol family 1 [ 0.894519] RPC: Registered named UNIX socket transport module. [ 0.894532] RPC: Registered udp transport module. [ 0.894543] RPC: Registered tcp transport module. [ 0.894555] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.894575] PCI: CLS 0 bytes, default 64 [ 0.896448] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counte rs available [ 0.898544] Initialise system trusted keyrings [ 0.898767] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 0.909413] FS-Cache: Netfs 'nfs' registered for caching [ 0.910091] NFS: Registering the id_resolver key type [ 0.910128] Key type id_resolver registered [ 0.910140] Key type id_legacy registered [ 0.910162] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.911201] Key type asymmetric registered [ 0.911215] Asymmetric key parser 'x509' registered [ 0.911383] bounce: pool size: 64 pages [ 0.911424] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 49) [ 0.911667] io scheduler mq-deadline registered [ 0.911680] io scheduler kyber registered [ 0.915398] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 0.915421] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500 000, using [bus 00-ff] [ 0.915485] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0 x00f8000000 [ 0.915549] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0 x0000000000 [ 0.973615] brcm-pcie fd500000.pcie: link up, 5 GT/s x1 (SSC) [ 0.973917] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 0.973935] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.973955] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff]) [ 0.974010] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 0.974247] pci 0000:00:00.0: PME# supported from D0 D3hot [ 0.977572] PCI: bus0: Fast back to back transfers disabled [ 0.977594] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), rec onfiguring [ 0.977856] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 0.977999] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.978383] pci 0000:01:00.0: PME# supported from D0 D3cold [ 0.981755] PCI: bus1: Fast back to back transfers disabled [ 0.981774] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.981811] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 0.981833] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64 bit] [ 0.981913] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.981936] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 0.982238] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 0.982452] pcieport 0000:00:00.0: PME: Signaling with IRQ 55 [ 0.982818] pcieport 0000:00:00.0: AER: enabled with IRQ 55 [ 0.983136] pci 0000:01:00.0: enabling device (0140 -> 0142) [ 0.989946] iproc-rng200 fe104000.rng: hwrng registered [ 0.990261] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000 000(1024 MiB) [ 0.990903] vc-sm: Videocore shared memory driver [ 0.991425] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe2 00000 [ 1.003061] brd: module loaded [ 1.014901] loop: module loaded [ 1.016229] Loading iSCSI transport class v2.0-870. [ 1.018160] libphy: Fixed MDIO Bus: probed [ 1.018725] bcmgenet fd580000.ethernet: failed to get enet clock [ 1.018743] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 1.018764] bcmgenet fd580000.ethernet: failed to get enet-wol clock [ 1.018784] bcmgenet fd580000.ethernet: failed to get enet-eee clock [ 1.018810] bcmgenet: Skipping UMAC reset [ 1.031535] libphy: bcmgenet MII bus: probed [ 1.121597] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.122602] usbcore: registered new interface driver r8152 [ 1.122667] usbcore: registered new interface driver lan78xx [ 1.122725] usbcore: registered new interface driver smsc95xx [ 1.123126] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.123158] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus numbe r 1 [ 1.125418] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 qu irks 0x0000001000000890 [ 1.126628] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 5.04 [ 1.126644] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 1.126659] usb usb1: Product: xHCI Host Controller [ 1.126673] usb usb1: Manufacturer: Linux 5.4.51-v7l+ xhci-hcd [ 1.126686] usb usb1: SerialNumber: 0000:01:00.0 [ 1.127265] hub 1-0:1.0: USB hub found [ 1.127358] hub 1-0:1.0: 1 port detected [ 1.127899] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.127922] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus numbe r 2 [ 1.127945] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 1.128427] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bc dDevice= 5.04 [ 1.128443] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 1.128458] usb usb2: Product: xHCI Host Controller [ 1.128471] usb usb2: Manufacturer: Linux 5.4.51-v7l+ xhci-hcd [ 1.128485] usb usb2: SerialNumber: 0000:01:00.0 [ 1.129070] hub 2-0:1.0: USB hub found [ 1.129155] hub 2-0:1.0: 4 ports detected [ 1.130559] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.130828] dwc_otg: FIQ enabled [ 1.130840] dwc_otg: NAK holdoff enabled [ 1.130851] dwc_otg: FIQ split-transaction FSM enabled [ 1.130865] Module dwc_common_port init [ 1.131270] usbcore: registered new interface driver uas [ 1.131382] usbcore: registered new interface driver usb-storage [ 1.131618] mousedev: PS/2 mouse device common for all mice [ 1.133659] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.136109] sdhci: Secure Digital Host Controller Interface driver [ 1.136121] sdhci: Copyright(c) Pierre Ossman [ 1.136678] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [ 1.137195] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.140845] ledtrig-cpu: registered to indicate activity on CPUs [ 1.141147] hidraw: raw HID events driver (C) Jiri Kosina [ 1.141319] usbcore: registered new interface driver usbhid [ 1.141330] usbhid: USB HID core driver [ 1.142375] vchiq: vchiq_init_state: slot_zero = (ptrval) [ 1.144260] [vc_sm_connected_init]: start [ 1.153164] [vc_sm_connected_init]: end - returning 0 [ 1.155164] Initializing XFRM netlink socket [ 1.155200] NET: Registered protocol family 17 [ 1.155308] Key type dns_resolver registered [ 1.155795] Registering SWP/SWPB emulation handler [ 1.156112] registered taskstats version 1 [ 1.156131] Loading compiled-in X.509 certificates [ 1.156615] Key type ._fscrypt registered [ 1.156627] Key type .fscrypt registered [ 1.166818] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.166883] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 29, base_baud = 0) is a PL011 rev2 [ 1.172785] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains drive r [ 1.173686] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 1.173700] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 1.223941] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 1.225582] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.227313] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.230239] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.231901] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.239505] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using A DMA [ 1.242497] of_cfs_init [ 1.242621] of_cfs_init: OK [ 1.243792] Waiting for root device PARTUUID=ea7d04d6-02... [ 1.280931] random: fast init done [ 1.302206] mmc1: new high speed SDIO card at address 0001 [ 1.349788] mmc0: new ultra high speed DDR50 SDHC card at address aaaa [ 1.350672] mmcblk0: mmc0:aaaa SB16G 14.8 GiB [ 1.353744] mmcblk0: p1 p2 [ 1.365103] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesyst em [ 1.365117] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 1.491572] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.597549] EXT4-fs (mmcblk0p2): recovery complete [ 1.599541] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O pts: (null) [ 1.599610] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.600332] devtmpfs: mounted [ 1.608246] Freeing unused kernel memory: 2048K [ 1.608534] Run /sbin/init as init process [ 1.674259] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcd Device= 4.21 [ 1.674277] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.674292] usb 1-1: Product: USB2.0 Hub [ 1.676191] hub 1-1:1.0: USB hub found [ 1.676427] hub 1-1:1.0: 4 ports detected [ 2.001578] usb 1-1.3: new full-speed USB device number 3 using xhci_hcd [ 2.033908] systemd[1]: System time before build time, advancing clock. [ 2.145693] NET: Registered protocol family 10 [ 2.146984] Segment Routing with IPv6 [ 2.150395] usb 1-1.3: New USB device found, idVendor=0451, idProduct=16a8, b cdDevice= 0.09 [ 2.150413] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber =3 [ 2.150429] usb 1-1.3: Product: TI CC2531 USB CDC [ 2.150444] usb 1-1.3: Manufacturer: Texas Instruments [ 2.150459] usb 1-1.3: SerialNumber: __0X00124B001936DCEE [ 2.177207] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SEL INUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL + XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybr id) [ 2.177963] systemd[1]: Detected architecture arm. [ 2.237002] systemd[1]: Set hostname to <raspberrypi4-iob>. [ 3.002096] random: systemd: uninitialized urandom read (16 bytes read) [ 3.040022] systemd[1]: Condition check resulted in Journal Audit Socket bein g skipped. [ 3.040182] random: systemd: uninitialized urandom read (16 bytes read) [ 3.040550] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 3.040815] random: systemd: uninitialized urandom read (16 bytes read) [ 3.041342] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.042062] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.042642] systemd[1]: Listening on Syslog Socket. [ 3.044721] systemd[1]: Created slice User and Session Slice. [ 3.045275] systemd[1]: Listening on udev Kernel Socket. [ 3.197324] i2c /dev entries driver [ 3.649584] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 3.749859] systemd-journald[105]: Received request to flush runtime journal from PID 1 [ 4.324434] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Reg isters at 0xfeb00000 length 0x00010000 [ 4.325292] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised : Registers at 0xfeb10000 length 0x00001000 [ 4.325908] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Reg isters at 0xfeb20000 length 0x00010000 [ 4.326417] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Regis ters at 0xfeb30000 length 0x00010000 [ 4.360601] vc_sm_cma: module is from the staging directory, the quality is u nknown, you have been warned. [ 4.367209] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 4.367233] [vc_sm_connected_init]: start [ 4.370193] mc: Linux media interface: v0.10 [ 4.378269] [vc_sm_connected_init]: installed successfully [ 4.406302] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 4.425787] videodev: Linux video capture interface: v2.00 [ 4.430575] bcm2835_audio bcm2835_audio: card created with 8 channels [ 4.475458] bcm2835_mmal_vchiq: module is from the staging directory, the qua lity is unknown, you have been warned. [ 4.486376] bcm2835_v4l2: module is from the staging directory, the quality i s unknown, you have been warned. [ 4.511755] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 4.526417] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev /video13 [ 4.526935] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /de v/video14 [ 4.527377] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /de v/video15 [ 4.527713] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/ video16 [ 4.527736] bcm2835-isp bcm2835-isp: Register output node 0 with media contro ller [ 4.527757] bcm2835-isp bcm2835-isp: Register capture node 1 with media contr oller [ 4.527776] bcm2835-isp bcm2835-isp: Register capture node 2 with media contr oller [ 4.527795] bcm2835-isp bcm2835-isp: Register capture node 3 with media contr oller [ 4.528002] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 4.535700] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 4.548353] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 4.548397] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 4.557223] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 4.557264] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 4.567722] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 4.567766] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 4.844037] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [ 4.854734] cfg80211: Loading compiled-in X.509 certificates for regulatory d atabase [ 4.921374] cdc_acm 1-1.3:1.0: ttyACM0: USB ACM device [ 4.924794] usbcore: registered new interface driver cdc_acm [ 4.924810] cdc_acm: USB Abstract Control Model driver for USB modems and ISD N adapters [ 4.984539] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.985104] [drm] No displays found. Consider forcing hotplug if HDMI is atta ched [ 4.985244] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4]) [ 4.985268] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.985280] [drm] No driver support for vblank timestamp query. [ 4.985291] [drm] Setting vblank_disable_immediate to false because get_vblan k_timestamp == NULL [ 4.991103] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 [ 5.059231] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 5.075548] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio f or chip BCM4345/6 [ 5.076334] usbcore: registered new interface driver brcmfmac [ 5.102585] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455 -sdio.raspberrypi,4-model-b.txt failed with error -2 [ 5.340985] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio f or chip BCM4345/6 [ 5.357233] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 2 2020 23:30:41 version 7.45.202 (r724630 CY) FWID 01-72f6ece2 [ 6.965476] uart-pl011 fe201000.serial: no DMA platform data [ 6.983222] random: crng init done [ 6.983239] random: 7 urandom warning(s) missed due to ratelimiting [ 7.193648] 8021q: 802.1Q VLAN Support v1.8 [ 7.451720] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:1 02396k SSFS [ 7.595612] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 7.842770] bcmgenet: Skipping UMAC reset [ 7.844496] bcmgenet fd580000.ethernet: configuring instance for external RGM II [ 7.844688] bcmgenet fd580000.ethernet eth0: Link is Down [ 13.005231] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 13.583627] Bluetooth: Core ver 2.22 [ 13.583671] NET: Registered protocol family 31 [ 13.583676] Bluetooth: HCI device and connection manager initialized [ 13.583690] Bluetooth: HCI socket layer initialized [ 13.583698] Bluetooth: L2CAP socket layer initialized [ 13.583711] Bluetooth: SCO socket layer initialized [ 13.591298] Bluetooth: HCI UART driver ver 2.3 [ 13.591306] Bluetooth: HCI UART protocol H4 registered [ 13.591360] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 13.592605] Bluetooth: HCI UART protocol Broadcom registered [ 13.809347] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 13.809354] Bluetooth: BNEP filters: protocol multicast [ 13.809372] Bluetooth: BNEP socket layer initialized [ 13.898461] Bluetooth: RFCOMM TTY layer initialized [ 13.898481] Bluetooth: RFCOMM socket layer initialized [ 13.898505] Bluetooth: RFCOMM ver 1.11 [ 14.644373] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net .ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms instea d pi@raspberrypi4-iob:~ $ -
[ 1.350672] mmcblk0: mmc0:aaaa SB16G 14.8 GiB [ 1.353744] mmcblk0: p1 p2 [ 1.365103] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesyst em [ 1.365117] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 1.491572] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.597549] EXT4-fs (mmcblk0p2): recovery complete [ 1.599541] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O pts: (null) [ 1.599610] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.Könnte auf eine beschädigte SD-Karte hindeuten. Recovery macht das System eigentlich nur, wenn es zuvor irgendwo klemmt.
Auf meinem System sieht die Passage so aus:
[ 1.307921] mmc1: new high speed SDIO card at address 0001 [ 1.343328] mmc0: new ultra high speed DDR50 SDHC card at address 0001 [ 1.344616] mmcblk0: mmc0:0001 EB1QT 29.8 GiB [ 1.347586] mmcblk0: p1 p2 < p5 p6 p7 > [ 1.371115] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null) [ 1.371200] VFS: Mounted root (ext4 filesystem) readonly on device 179:7. -
kann ich mir Image von der karte machen und auf neu karte daraufspielen .
oder ich übertrage den Fehler ?
das ganze dürfte doch nicht mit dem ble Adapter zu tun haben oder ?
ein gesicherten Image spiele ich gerade auf NEUE Sd . dann dürfte mit neue karte doch anders aussehen
