Weihnachtsangebot 2025! 🎄

[rccardany]

Hallo zusammen,

ich hatte meine laufende iob Instanz einem Update über

obroker stop
iobroker update
iobroker upgrade
iobroker start

unterzogen. Anschließend war der iobroker fleißig im Hintergrund am Arbeiten (Das habe ich an den Skripten, die weiterhin ausgeführt wurden, erkannt). Eigentlich ging alles wie gewohnt nur das Webinterface war nicht erreichbar.

sudo netstat -tuln | grep 8081

liefert keinen Eintrag trotz

  system.adapter.admin.0                  : admin                 : zbox                                     -  enabled, port: 8081, bind: 0.0.0.0, run as: admin

nach einigen Veruschen das ganze z.B. über

iob fix

zu reparieren habe ich aufgegeben und dachte eine Neuinstallation wäre Sinnvoll. Ich mache Regelmäßig Backups und wollte nun davon gebrauch machen. Ich habe Backups vor und nach dem Aktualisierungsversuch vom iob.

Also habe ich folgendes getan:

iob stop
sudo rm -rf /opt/iobroker
sudo apt update
sudo apt upgrade -y
sudo apt install -y curl
curl -sLf https://iobroker.net/install.sh | bash -

Anschließend war wie zu erwarten iob auch wie gewohnt erreichbar. Nach dem einspielen des Backups über Backupit jedoch war erneut iob im browser nicht erreichbar. (Gleiches fehlerbild wie oben - also admin.0 enabled - port 8081 keine Ausgabe)

Habe es sowohl mit dem alten als auch mit dem neuen Backup versucht. - gleiches Fehlerbild
Könnt ihr bitte helfen?

iob diag 

spuckt leider nur

pi@zbox:~$ iob diag
[sudo] Passwort für pi:
[sudo] password for iobroker:
pi@zbox:~$ su
Passwort:
root@zbox:/home/pi# sudo iob diag

***For security reasons ioBroker should not be run or administrated as root.***
By default only a user that is member of iobroker group can execute ioBroker commands.
Please read the Documentation on how to set up such a user, if not done yet.
Only in very special cases you can run iobroker commands by adding the --allow-root option at the end of the command line.
Please note that this option may be disabled in the future, so please change your setup accordingly now.

ein passwort vom iobroker user kenne ich nicht. Wüsste nicht, dass ich hier etwas gesetzt habe
insatlliert habe ich eigentlich unter dem User pi

[Thomas Braun]

@rccardany sagte in admin.0 enabled aber webinterface nicht erreichbar:

ein passwort vom iobroker user kenne ich nicht. Wüsste nicht, dass ich hier etwas gesetzt habe
insatlliert habe ich eigentlich unter dem User pi

Der user iobroker hat und braucht kein Passwort, das ist ein Systemuser.
Und an deinen Auszügen sehe ich schon, dass du dir wohl irgendwann mal durch den falschen Einsatz von root und dessen Rechten mal das Rechtegefüge zerballert hast.

Versuch mal das Diagnose-Skript von Hand auszuführen.

curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

UND MELD DICH NIE, NIE, NIEMALS ALS ROOT AN!!!!!!!!!!!!!!!!!!!!!!!!!!

[rccardany]

@thomas-braun
das ging optup siehe hier:

========== Start marking the full check here ===========

```bash
Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 13 (trixie)
 Static hostname: zbox
       Icon name: computer-desktop
         Chassis: desktop 🖥️
          Kernel: Linux 6.12.41+deb13-amd64
    Architecture: x86-64
 Hardware Vendor: NA
  Hardware Model: ZBOX-CI327NANO-GS-01
Firmware Version: 5.12
   Firmware Date: Fri 2017-08-11
    Firmware Age: 8y 1w 1d
OS is similar to:

model name      : Intel(R) Celeron(R) CPU N3450 @ 1.10GHz
Docker          : false
Virtualization  : none
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 10:28:36 up 4 min,  1 user,  load average: 0.33, 0.50, 0.27
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'trixie'!

*** TIME AND TIMEZONES ***
               Local time: Tue 2025-08-19 10:28:36 CEST
           Universal time: Tue 2025-08-19 08:28:36 UTC
                 RTC time: Tue 2025-08-19 08:28:36
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
pi
JAVA_HOME=/usr/lib/jvm/java-8-openjdk-amd64/jre/
HOME=/home/pi
GROUPS=pi dialout sudo iobroker

User that is running 'js-controller':
iobroker
[sudo] password for pi:
HOME=/home/iobroker
SUDO_HOME=/home/pi
GROUPS=iobroker tty dialout sudo audio video plugdev

*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Unit display-manager.service could not be found.
Display-Manager:
Desktop:
Session:                tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.2G        1.1G        6.4G        1.1M        904M        7.0G
Swap:           1.0G          0B        1.0G
Total:          9.2G        1.1G        7.4G

Active iob-Instances:   3

         7793 M total memory
         1071 M used memory
         1294 M active memory
          192 M inactive memory
         6096 M free memory
           61 M buffer memory
          801 M swap cache
          976 M total swap
            0 M used swap
          976 M free swap

*** top - Table Of Processes  ***
top - 10:29:00 up 5 min,  1 user,  load average: 0.24, 0.47, 0.26
Tasks: 161 total,   1 running, 160 sleeping,   0 stopped,   0 zombie
%Cpu(s):  1.9 us,  3.7 sy,  0.0 ni, 92.6 id,  1.9 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   7793.6 total,   6094.3 free,   1073.3 used,    863.4 buff/cache
MiB Swap:    977.0 total,    977.0 free,      0.0 used.   6720.3 avail Mem

*** FAILED SERVICES ***

  UNIT             LOAD   ACTIVE SUB    DESCRIPTION
* telegraf.service loaded failed failed Telegraf

Legend: LOAD   -> Reflects whether the unit definition was properly loaded.
        ACTIVE -> The high-level unit activation state, i.e. generalization of SUB.
        SUB    -> The low-level unit activation state, values depend on unit type.

1 loaded units listed.


*** DMESG CRITICAL ERRORS ***
3 CRITICAL ERRORS DETECTED!
Check 'sudo dmesg --level=emerg,alert,crit -T' for details

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.8G     0  3.8G   0% /dev
tmpfs          tmpfs     780M  784K  779M   1% /run
/dev/sda2      ext4      116G   19G   91G  18% /
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
efivarfs       efivarfs  128K   65K   59K  53% /sys/firmware/efi/efivars
tmpfs          tmpfs     5.0M     0  5.0M   0% /run/lock
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-journald.service
tmpfs          tmpfs     3.9G     0  3.9G   0% /tmp
/dev/sda1      vfat      511M  8.8M  503M   2% /boot/efi
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/getty@tty1.service
tmpfs          tmpfs     780M   12K  780M   1% /run/user/1002

Messages concerning ext4 filesystem in dmesg:
[Tue Aug 19 10:23:58 2025] EXT4-fs (sda2): mounted filesystem b33bdf07-b112-4d02-98b4-285896e49528 ro with ordered data mode. Quota mode: none.
[Tue Aug 19 10:23:59 2025] EXT4-fs (sda2): re-mounted b33bdf07-b112-4d02-98b4-285896e49528 r/w.

Show mounted filesystems:
TARGET      SOURCE    FSTYPE OPTIONS
/           /dev/sda2 ext4   rw,relatime,errors=remount-ro
`-/boot/efi /dev/sda1 vfat   rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro

Files in neuralgic directories:

/var:
12G     /var/
7.3G    /var/lib
6.6G    /var/lib/influxdb/data
6.6G    /var/lib/influxdb
4.8G    /var/lib/influxdb/data/SmartHome/autogen

Hint: You are currently not seeing messages from other users and the system.
      Users in groups 'adm', 'systemd-journal' can see all messages.
      Pass -q to turn off this notice.
Archived and active journals take up 48M in the file system.

/opt/iobroker/backups:
6.5M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
226M    /opt/iobroker/iobroker-data/
188M    /opt/iobroker/iobroker-data/files
47M     /opt/iobroker/iobroker-data/files/admin.admin
46M     /opt/iobroker/iobroker-data/files/admin.admin/custom/assets
46M     /opt/iobroker/iobroker-data/files/admin.admin/custom

The five largest files in iobroker-data are:
30M     /opt/iobroker/iobroker-data/objects.jsonl
24M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map
12M     /opt/iobroker/iobroker-data/files/javascript.admin/static/js/2.ea6ad656.chunk.js.map
9.3M    /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js
8.6M    /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BBu8-Y_o.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'

*** ZigBee Settings ***

HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2141436-if00
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v20.19.2
/usr/bin/node           v20.19.2
/usr/bin/npm            9.2.0
/usr/bin/npx            9.2.0
/usr/bin/corepack       0.24.0

nodejs:
  Installed: 20.19.2+dfsg-1
  Candidate: 20.19.2+dfsg-1
  Version table:
 *** 20.19.2+dfsg-1 500
        500 http://deb.debian.org/debian trixie/main amd64 Packages
        100 /var/lib/dpkg/status

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
zbox                zbox (version: 7.0.7, hostname: zbox          , alive, uptime: 291)

Core adapters versions
js-controller:  7.0.7
admin:          6.2.23
javascript:     5.7.0

nodejs modules from github:     0

Adapter State
  system.adapter.admin.0                  : admin                 : zbox                                     -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alexa2.0                 : alexa2                : zbox                                     - disabled
+ system.adapter.backitup.0               : backitup              : zbox                                     -  enabled
  system.adapter.cloud.0                  : cloud                 : zbox                                     - disabled
  system.adapter.daswetter.0              : daswetter             : zbox                                     - disabled
+ system.adapter.discovery.0              : discovery             : zbox                                     - disabled
  system.adapter.fakeroku.0               : fakeroku              : zbox                                     - disabled
  system.adapter.harmony.0                : harmony               : zbox                                     - disabled
  system.adapter.hm-rega.0                : hm-rega               : zbox                                     - disabled
  system.adapter.hm-rpc.0                 : hm-rpc                : zbox                                     - disabled, port: 0
  system.adapter.hm-rpc.1                 : hm-rpc                : zbox                                     - disabled, port: 0
  system.adapter.homeconnect.0            : homeconnect           : zbox                                     - disabled
  system.adapter.influxdb.0               : influxdb              : zbox                                     - disabled, port: 8086
  system.adapter.iot.0                    : iot                   : zbox                                     - disabled
  system.adapter.javascript.0             : javascript            : zbox                                     - disabled
  system.adapter.kodi.0                   : kodi                  : zbox                                     - disabled, port: 9090
  system.adapter.linux-control.0          : linux-control         : zbox                                     - disabled
  system.adapter.mclighting.0             : mclighting            : zbox                                     - disabled, port: 81
  system.adapter.mihome-vacuum.0          : mihome-vacuum         : zbox                                     - disabled, port: 54321
  system.adapter.modbus.0                 : modbus                : zbox                                     - disabled
  system.adapter.modbus.3                 : modbus                : zbox                                     - disabled
  system.adapter.mqtt.0                   : mqtt                  : zbox                                     - disabled, port: 1883, bind: 192.168.1.171
  system.adapter.mqtt.2                   : mqtt                  : zbox                                     - disabled, port: 1883, bind: 0.0.0.0
  system.adapter.mqtt.3                   : mqtt                  : zbox                                     - disabled, port: 1885, bind: 0.0.0.0
  system.adapter.mqtt.4                   : mqtt                  : zbox                                     - disabled, port: 1883, bind: 0.0.0.0
  system.adapter.mqtt.5                   : mqtt                  : zbox                                     - disabled, port: 1888, bind: 0.0.0.0
  system.adapter.mqtt.6                   : mqtt                  : zbox                                     - disabled, port: 1883, bind: 0.0.0.0
  system.adapter.net-tools.0              : net-tools             : zbox                                     - disabled
  system.adapter.node-red.0               : node-red              : zbox                                     - disabled, port: 1880, bind: 192.168.1.171
  system.adapter.octoprint.0              : octoprint             : zbox                                     - disabled
  system.adapter.parser.0                 : parser                : zbox                                     - disabled
  system.adapter.ping.0                   : ping                  : zbox                                     - disabled
  system.adapter.pvforecast.0             : pvforecast            : zbox                                     - disabled
  system.adapter.shelly.0                 : shelly                : zbox                                     - disabled, port: 1882, bind: 0.0.0.0
  system.adapter.solax.0                  : solax                 : zbox                                     - disabled
  system.adapter.sonoff.0                 : sonoff                : zbox                                     - disabled, port: 1883, bind: 0.0.0.0
  system.adapter.spotify-premium.0        : spotify-premium       : zbox                                     - disabled
  system.adapter.spotify-premium.1        : spotify-premium       : zbox                                     - disabled
  system.adapter.spotify-premium.2        : spotify-premium       : zbox                                     - disabled
  system.adapter.telegram.0               : telegram              : zbox                                     - disabled, port: 8443, bind: 0.0.0.0
  system.adapter.telegram.1               : telegram              : zbox                                     - disabled, port: 8443, bind: 0.0.0.0
  system.adapter.text2command.0           : text2command          : zbox                                     - disabled
  system.adapter.tibberlink.0             : tibberlink            : zbox                                     - disabled
  system.adapter.tuya.0                   : tuya                  : zbox                                     - disabled
  system.adapter.unifi-protect.0          : unifi-protect         : zbox                                     - disabled
  system.adapter.unifi.0                  : unifi                 : zbox                                     - disabled
  system.adapter.web.0                    : web                   : zbox                                     - disabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.whatsapp-cmb.0           : whatsapp-cmb          : zbox                                     - disabled
  system.adapter.whatsapp-cmb.1           : whatsapp-cmb          : zbox                                     - disabled
  system.adapter.whatsapp-cmb.2           : whatsapp-cmb          : zbox                                     - disabled
  system.adapter.wled.0                   : wled                  : zbox                                     - disabled
  system.adapter.zigbee.0                 : zigbee                : zbox                                     - disabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2141436-if00

+ instance is alive

Enabled adapters with bindings
  system.adapter.admin.0                  : admin                 : zbox                                     -  enabled, port: 8081, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "admin"        : 7.6.17   , installed 6.2.23 [Updatable]
Adapter    "alexa2"       : 3.27.3   , installed 3.25.5 [Updatable]
Adapter    "backitup"     : 3.3.5    , installed 2.5.4  [Updatable]
Adapter    "cloud"        : 5.0.1    , installed 4.3.0  [Updatable]
Adapter    "daswetter"    : 3.2.3    , installed 3.1.8  [Updatable]
Adapter    "discovery"    : 5.0.0    , installed 3.1.0  [Updatable]
Adapter    "fakeroku"     : 0.3.0    , installed 0.2.2  [Updatable]
Adapter    "harmony"      : 1.5.0    , installed 1.2.2  [Updatable]
Adapter    "hm-rega"      : 5.1.0    , installed 3.0.40 [Updatable]
Adapter    "hm-rpc"       : 2.0.2    , installed 1.15.12 [Updatable]
Adapter    "homeconnect"  : 1.4.3    , installed 1.1.1  [Updatable]
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "iot"          : 3.3.0    , installed 1.11.4 [Updatable]
Adapter    "javascript"   : 8.9.2    , installed 5.7.0  [Updatable]
Controller "js-controller": 7.0.7    , installed 7.0.7
Adapter    "kodi"         : 3.1.0    , installed 2.0.8  [Updatable]
Adapter    "linux-control": 1.1.5    , installed 1.1.5
Adapter    "mclighting"   : 0.2.0    , installed 0.1.2  [Updatable]
Adapter    "mihome-vacuum": 5.2.0    , installed 3.8.6  [Updatable]
Adapter    "modbus"       : 6.3.2    , installed 6.3.2
Adapter    "mqtt"         : 6.1.2    , installed 3.0.6  [Updatable]
Adapter    "net-tools"    : 1.1.2    , installed 0.2.0  [Updatable]
Adapter    "node-red"     : 5.2.1    , installed 3.3.0  [Updatable]
Adapter    "octoprint"    : 5.1.0    , installed 3.2.0  [Updatable]
Adapter    "parser"       : 2.2.4    , installed 1.1.8  [Updatable]
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "pvforecast"   : 4.1.0    , installed 2.9.0  [Updatable]
Adapter    "shelly"       : 10.1.0   , installed 7.0.0  [Updatable]
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "socketio"     : 6.7.1    , installed 4.2.0  [Updatable]
Adapter    "solax"        : 0.9.18   , installed 0.9.6  [Updatable]
Adapter    "sonoff"       : 3.1.2    , installed 2.5.1  [Updatable]
Adapter    "spotify-premium": 1.5.2  , installed 1.2.1  [Updatable]
Adapter    "telegram"     : 4.1.0    , installed 1.12.6 [Updatable]
Adapter    "text2command" : 3.0.3    , installed 2.2.1  [Updatable]
Adapter    "tibberlink"   : 5.0.0    , installed 1.4.2  [Updatable]
Adapter    "tuya"         : 3.16.0   , installed 3.15.0 [Updatable]
Adapter    "unifi"        : 0.7.0    , installed 0.5.10 [Updatable]
Adapter    "unifi-protect": 1.0.1    , installed 1.0.1
Adapter    "web"          : 7.0.8    , installed 4.3.0  [Updatable]
Adapter    "whatsapp-cmb" : 0.3.0    , installed 0.3.0
Adapter    "wled"         : 0.7.2    , installed 0.7.2
Adapter    "ws"           : 2.6.2    , installed 1.3.0  [Updatable]
Adapter    "zigbee"       : 2.0.5    , installed 1.10.3 [Updatable]

Objects and States
Please stand by - This may take a while
Objects:        29574
States:         23356

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian trixie InRelease
Hit:2 http://deb.debian.org/debian trixie-updates InRelease
Hit:3 http://security.debian.org/debian-security trixie-security InRelease
Hit:4 https://repos.influxdata.com/debian stable InRelease
Hit:5 https://repos.influxdata.com/debian bullseye InRelease
Reading package lists... Done
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:25            0.0.0.0:*               LISTEN      0          5954       963/exim4
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1000       6915       1176/iobroker.js-co
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1000       6920       1176/iobroker.js-co
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN      998        6773       1053/influxd
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          1337       1/init
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          4676       702/sshd: /usr/sbin
tcp6       0      0 :::8086                 :::*                    LISTEN      998        4983       1053/influxd
tcp6       0      0 :::3000                 :::*                    LISTEN      110        4975       674/grafana
tcp6       0      0 ::1:25                  :::*                    LISTEN      0          5955       963/exim4
tcp6       0      0 :::111                  :::*                    LISTEN      0          3260       1/init
tcp6       0      0 :::22                   :::*                    LISTEN      0          4678       702/sshd: /usr/sbin
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          5777       631/dhclient
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          1338       1/init
udp6       0      0 :::111                  :::*                                0          2463       1/init

*** Log File - Last 25 Lines ***

2025-08-19 10:24:37.686  - info: host.zbox 52 instances found
2025-08-19 10:24:37.752  - info: host.zbox starting 2 instances
2025-08-19 10:24:38.361  - info: host.zbox Delete state "system.host.zbox.versions.nodeCurrent"
2025-08-19 10:24:38.548  - info: host.zbox Delete state "system.host.zbox.versions.nodeNewest"
2025-08-19 10:24:38.564  - info: host.zbox Delete state "system.host.zbox.versions.nodeNewestNext"
2025-08-19 10:24:38.584  - info: host.zbox instance system.adapter.admin.0 in version "6.2.23" started with pid 1194
2025-08-19 10:24:38.593  - info: host.zbox Delete state "system.host.zbox.versions.npmCurrent"
2025-08-19 10:24:38.644  - info: host.zbox Delete state "system.host.zbox.versions.npmNewest"
2025-08-19 10:24:38.652  - info: host.zbox Delete state "system.host.zbox.versions.npmNewestNext"
2025-08-19 10:24:38.660  - info: host.zbox Some obsolete host states deleted.
2025-08-19 10:24:42.754  - info: host.zbox instance system.adapter.backitup.0 in version "2.5.4" started with pid 1205
2025-08-19 10:24:43.723  - info: admin.0 (1194) starting. Version 6.2.23 in /opt/iobroker/node_modules/iobroker.admin, node: v20.19.2, js-controller: 7.0.7
2025-08-19 10:24:43.789  - info: admin.0 (1194) requesting all states
2025-08-19 10:24:43.790  - info: admin.0 (1194) requesting all objects
2025-08-19 10:24:47.271  - info: admin.0 (1194) received all objects
2025-08-19 10:24:47.472  - error: admin.0 (1194) Cannot create web-server: TypeError: Cannot read properties of undefined (reading 'createServerAsync')
2025-08-19 10:24:47.475  - info: admin.0 (1194) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2025-08-19 10:24:47.986  - warn: admin.0 (1194) get state error: Connection is closed.
2025-08-19 10:24:47.989  - warn: admin.0 (1194) Cannot check node.js/npm version
2025-08-19 10:24:48.053  - info: admin.0 (1194) terminating http server on port 8081
2025-08-19 10:24:48.246  - info: host.zbox instance system.adapter.admin.0 terminated by request of the instance itself and will not be restarted, before user restarts it.
2025-08-19 10:24:48.247  - info: host.zbox Do not restart adapter system.adapter.admin.0 because desired by instance
2025-08-19 10:24:48.354  - info: backitup.0 (1205) starting. Version 2.5.4 in /opt/iobroker/node_modules/iobroker.backitup, node: v20.19.2, js-controller: 7.0.7
2025-08-19 10:24:48.515  - info: backitup.0 (1205) [iobroker] backup was activated at 03:00 every 5 day(s)
2025-08-19 10:24:48.601  - info: backitup.0 (1205) [ccu] backup was activated at 04:00 every 5 day(s)



============ Mark until here for C&P =============

iob diag has finished.

ich hatte die Installation unter dem Pi user durchgeührt aber wurde nach dem su passwort gefragt. Hoffe das war soweit auch ok.

Habe nun

iobroker upgrade admin

ausgeführt und kann nun starten :)

[Homoran]

@thomas-braun sagte in admin.0 enabled aber webinterface nicht erreichbar:

UND MELD DICH NIE, NIE, NIEMALS ALS ROOT AN!!!!!!!!!!!!!!!!!!!!!!!!!!

@rccardany ...und dann noch zusätzlich sudo?

willst du due Weltherrschaft übernehmen?

[Thomas Braun]

@rccardany sagte in admin.0 enabled aber webinterface nicht erreichbar:

*** 20.19.2+dfsg-1 500

Dein nodejs ist falsch. Bring das per

iob nodejs-update 22

auf die richtige Version.
Und dann die ganzen Adapter-Antiquitäten auf Stand bringen.