NEWS
Latenztest/Verzögerung mit Zeitstempel berechnen
Skripten / Logik
4
Beiträge
3
Kommentatoren
421
Aufrufe
4
Watching
-
Ich würde gerne mal ermitteln wieviel Verzögerung mein iobroker hat.
Als so eine Art Gesundheitszustand. Weil teilweise das Licht mal erst nach 15 Sekunden eingeschaltet wird.Meine (evtl. schlechte) Idee ist:
Aktuelle Zeit vom Iobroker nehmen und dann über MQTT die Zeit von einem Shelly mit Tasmota-Firmware drauf abzuholen und davon die Differenz zu berechnen.
Im Optimalfall müsste die Zeit =0 sein.Bei mir kommen aber so werte von 03, 43, 53 heraus. Fühlt sich irgendwie falsch an.
NUC6i7KYK M.2 32GB RAM mit Proxmox
14 AccessPoints, 5 Switches 115 Adapter, 67913 Objekte, 57954 Zustände,126x Shelly, 26 Thermostate, Fire Tablets, DMX, USV, 18x echodot, 9xKlima, 4x heizung, beamer, 6x IP Speed dome, AiOnTheEdge, Tasmota Wemos, Fingerabdrucksensoren, VOIP TFE, Türsteuerung, BMZ,EMA -
Ich würde gerne mal ermitteln wieviel Verzögerung mein iobroker hat.
Als so eine Art Gesundheitszustand. Weil teilweise das Licht mal erst nach 15 Sekunden eingeschaltet wird.Meine (evtl. schlechte) Idee ist:
Aktuelle Zeit vom Iobroker nehmen und dann über MQTT die Zeit von einem Shelly mit Tasmota-Firmware drauf abzuholen und davon die Differenz zu berechnen.
Im Optimalfall müsste die Zeit =0 sein.Bei mir kommen aber so werte von 03, 43, 53 heraus. Fühlt sich irgendwie falsch an.
@roelli sagte in Latenztest/Verzögerung mit Zeitstempel berechnen:
Als so eine Art Gesundheitszustand. Weil teilweise das Licht mal erst nach 15 Sekunden eingeschaltet wird.
Es könnte auch der Gesundheitszustand des Systems sein. 15 Sekunden ist nämlich unterirdisch und absolut unüblich.
Was sagen
topundiob diag(bitte die Langfassung in </> codetags hier rein stellen) in der Konsole? -
Ich würde gerne mal ermitteln wieviel Verzögerung mein iobroker hat.
Als so eine Art Gesundheitszustand. Weil teilweise das Licht mal erst nach 15 Sekunden eingeschaltet wird.Meine (evtl. schlechte) Idee ist:
Aktuelle Zeit vom Iobroker nehmen und dann über MQTT die Zeit von einem Shelly mit Tasmota-Firmware drauf abzuholen und davon die Differenz zu berechnen.
Im Optimalfall müsste die Zeit =0 sein.Bei mir kommen aber so werte von 03, 43, 53 heraus. Fühlt sich irgendwie falsch an.
@roelli
Falls dein System überlastet ist wäre es nicht ideal da noch mehr Last drauf zu packen.
Wenn dann eher die grundursache herauszufinden und dort dann zu verbessern.
Das Monitoring sagt dir ja eigentlich auch nur, das es (gerade) schlecht ist. -
@roelli sagte in Latenztest/Verzögerung mit Zeitstempel berechnen:
Als so eine Art Gesundheitszustand. Weil teilweise das Licht mal erst nach 15 Sekunden eingeschaltet wird.
Es könnte auch der Gesundheitszustand des Systems sein. 15 Sekunden ist nämlich unterirdisch und absolut unüblich.
Was sagen
topundiob diag(bitte die Langfassung in </> codetags hier rein stellen) in der Konsole?@meister-mopper sagte in Latenztest/Verzögerung mit Zeitstempel berechnen:
@roelli sagte in Latenztest/Verzögerung mit Zeitstempel berechnen:
Als so eine Art Gesundheitszustand. Weil teilweise das Licht mal erst nach 15 Sekunden eingeschaltet wird.
Es könnte auch der Gesundheitszustand des Systems sein. 15 Sekunden ist nämlich unterirdisch und absolut unüblich.
Was sagen
topundiob diag(bitte die Langfassung in </> codetags hier rein stellen) in der Konsole?
```bash Script v.2024-10-19 *** BASE SYSTEM *** Static hostname: iobroker-lxc Icon name: computer-container Chassis: container Virtualization: lxc Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.8.8-1-pve Architecture: x86-64 OS is similar to: model name : Intel(R) Core(TM) i7-6770HQ CPU @ 2.60GHz Docker : false Virtualization : lxc Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 18:30:27 up 3 days, 21:37, 1 user, load average: 6.91, 6.22, 5.70 CPU threads: 8 *** LIFE CYCLE STATUS *** Debian 'bullseye' is the current oldstable version. Please upgrade to the latest stable release 'bookworm' in due time! *** TIME AND TIMEZONES *** Local time: Sat 2025-01-11 18:30:27 CET Universal time: Sat 2025-01-11 17:30:27 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: inactive RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev redis bluetooth User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev redis bluetooth A default user should be created! This user will be enabled to temporarily switch to root via 'sudo'! A root login is not required in most Linux Distributions. Run 'iobroker fix' or use the system tools to create a user. *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 16G 8.0G 8.0G 0.0K 342M 8.6G Swap: 0B 0B 0B Total: 16G 8.0G 8.0G Active iob-Instances: 57 16384 M total memory 8045 M used memory 8114 M active memory 0 M inactive memory 7995 M free memory 0 M buffer memory 342 M swap cache 0 M total swap 0 M used swap 0 M free swap *** top - Table Of Processes *** top - 18:30:28 up 3 days, 21:37, 1 user, load average: 6.91, 6.22, 5.70 Tasks: 119 total, 4 running, 115 sleeping, 0 stopped, 0 zombie %Cpu(s): 51.9 us, 4.7 sy, 0.0 ni, 42.6 id, 0.0 wa, 0.0 hi, 0.8 si, 0.0 st MiB Mem : 16384.0 total, 7995.5 free, 8046.1 used, 342.4 buff/cache MiB Swap: 0.0 total, 0.0 free, 0.0 used. 8646.5 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * run-rpc_pipefs.mount loaded failed failed RPC Pipe File System * sys-kernel-config.mount loaded failed failed Kernel Configuration File System * nut-driver.service loaded failed failed Network UPS Tools - power device driver controller * nut-monitor.service loaded failed failed Network UPS Tools - power device monitor and shutdown controller * systemd-journald-audit.socket loaded failed failed Journal Audit Socket LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 5 loaded units listed. *** DMESG CRITICAL ERRORS *** dmesg: read kernel buffer failed: Operation not permitted No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on rpool/data/subvol-201-disk-0 zfs 64G 16G 49G 24% / none tmpfs 492K 4.0K 488K 1% /dev udev devtmpfs 16G 0 16G 0% /dev/tty tmpfs tmpfs 16G 0 16G 0% /dev/shm tmpfs tmpfs 6.3G 480K 6.3G 1% /run tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs tmpfs 3.2G 0 3.2G 0% /run/user/0 tmpfs tmpfs 3.2G 0 3.2G 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: dmesg: read kernel buffer failed: Operation not permitted Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / rpool/data/subvol-201-disk-0 zfs rw,relatime,xattr,posixacl,casesensitive Files in neuralgic directories: /var: 7.7G /var/ 6.8G /var/lib 5.4G /var/lib/docker 3.6G /var/lib/docker/containers/66af97a102d568e200f457413a4542fc75b1add1081eb2cd0a8d88ba309befcd 3.6G /var/lib/docker/containers Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 90.4M in the file system. /opt/iobroker/backups: 460M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 665M /opt/iobroker/iobroker-data/ 287M /opt/iobroker/iobroker-data/files 189M /opt/iobroker/iobroker-data/backup-objects 146M /opt/iobroker/iobroker-data/esphome.0/.esphome 146M /opt/iobroker/iobroker-data/esphome.0 The five largest files in iobroker-data are: find: Failed to change directory: /root: Permission denied find: Failed to change directory: /root: Permission denied find: Failed to change directory: /root: Permission denied find: Failed to change directory: /root: Permission denied find: Failed to change directory: /root: Permission denied find: Failed to change directory: /root: Permission denied find: Failed to change directory: /root: Permission denied find: Failed to change directory: /root: Permission denied find: Failed to change directory: /root: Permission denied find: Failed to change directory: /root: Permission denied find: Failed to change directory: /root: Permission denied find: Failed to change directory: /root: Permission denied find: Failed to change directory: /root: Permission denied find: Failed to change directory: /root: Permission denied find: Failed to restore initial working directory: /root: Permission denied USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp *** NodeJS-Installation *** /usr/bin/nodejs v20.18.1 /usr/bin/node v20.18.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.4 nodejs: Installed: 20.18.1-1nodesource1 Candidate: 20.18.1-1nodesource1 Version table: *** 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 12.22.12~dfsg-1~deb11u5 500 500 http://security.debian.org bullseye-security/main amd64 Packages 12.22.12~dfsg-1~deb11u4 500 500 http://ftp.debian.org/debian bullseye/main amd64 Packages find: Failed to restore initial working directory: /root: Permission denied Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: redis States type: redis Hosts: iobroker-lxc iobroker-lxc (version: 7.0.6, hostname: iobroker-lxc , alive, uptime: 337054) Core adapters versions js-controller: 7.0.6 admin: 7.4.10 javascript: 8.8.3 nodejs modules from github: 3 +-- iobroker.admin-mono@ (git+ssh://git@github.com/ioBroker/ioBroker.admin.git#4bc4babcf524300e7ac34558060b779252e368aa) +-- iobroker.life360@0.2.22 (git+ssh://git@github.com/MiGoller/ioBroker.life360.git#23166aab1b2e36d917a9b7b480d9faa7f73ca2d1) +-- iobroker.onvif-alt@0.2.0 (git+ssh://git@github.com/Jey-Cee/iobroker.onvif-alt.git#f524cdbc00567a3351217272ab5af29d9947c967) Adapter State + system.adapter.admin.0 : admin : iobroker-lxc - enabled, port: 7777, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker-lxc - enabled system.adapter.alias-manager.0 : alias-manager : iobroker-lxc - enabled system.adapter.artnet.0 : artnet : iobroker-lxc - disabled, port: 6454 + system.adapter.backitup.0 : backitup : iobroker-lxc - enabled + system.adapter.bring.0 : bring : iobroker-lxc - enabled system.adapter.cameras.0 : cameras : iobroker-lxc - disabled, port: 8200, bind: 127.0.0.1 + system.adapter.cloud.0 : cloud : iobroker-lxc - enabled system.adapter.countdown.0 : countdown : iobroker-lxc - disabled + system.adapter.daikin-cloud.0 : daikin-cloud : iobroker-lxc - enabled + system.adapter.daikin.0 : daikin : iobroker-lxc - enabled + system.adapter.daikin.1 : daikin : iobroker-lxc - enabled + system.adapter.daikin.2 : daikin : iobroker-lxc - enabled + system.adapter.daikin.3 : daikin : iobroker-lxc - enabled + system.adapter.daikin.4 : daikin : iobroker-lxc - enabled system.adapter.daswetter.0 : daswetter : iobroker-lxc - enabled + system.adapter.device-reminder.0 : device-reminder : iobroker-lxc - enabled + system.adapter.device-watcher.0 : device-watcher : iobroker-lxc - enabled + system.adapter.ecovacs-deebot.0 : ecovacs-deebot : iobroker-lxc - enabled + system.adapter.email.0 : email : iobroker-lxc - enabled + system.adapter.fakeroku.0 : fakeroku : iobroker-lxc - enabled + system.adapter.followthesun.0 : followthesun : iobroker-lxc - enabled system.adapter.fullybrowser.0 : fullybrowser : iobroker-lxc - disabled + system.adapter.harmony.0 : harmony : iobroker-lxc - enabled system.adapter.hass.0 : hass : iobroker-lxc - disabled, port: 8123 system.adapter.heatingcontrol.0 : heatingcontrol : iobroker-lxc - disabled + system.adapter.hikvision-alarmserver.0 : hikvision-alarmserver : iobroker-lxc - enabled, port: 8089, bind: 192.168.64.3 system.adapter.history.0 : history : iobroker-lxc - disabled system.adapter.ical.0 : ical : iobroker-lxc - enabled system.adapter.iceroad.0 : iceroad : iobroker-lxc - disabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : iobroker-lxc - enabled + system.adapter.influxdb.0 : influxdb : iobroker-lxc - enabled, port: 8086 + system.adapter.iot.0 : iot : iobroker-lxc - enabled + system.adapter.javascript.0 : javascript : iobroker-lxc - enabled + system.adapter.javascript.1 : javascript : iobroker-lxc - enabled system.adapter.life360.0 : life360 : iobroker-lxc - disabled + system.adapter.meater.0 : meater : iobroker-lxc - enabled + system.adapter.mielecloudservice.0 : mielecloudservice : iobroker-lxc - enabled + system.adapter.modbus.0 : modbus : iobroker-lxc - enabled + system.adapter.mqtt.0 : mqtt : iobroker-lxc - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.net-tools.0 : net-tools : iobroker-lxc - enabled system.adapter.netatmo-crawler.0 : netatmo-crawler : iobroker-lxc - enabled + system.adapter.netatmo-energy.0 : netatmo-energy : iobroker-lxc - enabled + system.adapter.netatmo-energy.1 : netatmo-energy : iobroker-lxc - enabled + system.adapter.netatmo-energy.2 : netatmo-energy : iobroker-lxc - enabled + system.adapter.netatmo-energy.3 : netatmo-energy : iobroker-lxc - enabled + system.adapter.nina.0 : nina : iobroker-lxc - enabled + system.adapter.notification-manager.0 : notification-manager : iobroker-lxc - enabled system.adapter.odl.0 : odl : iobroker-lxc - enabled + system.adapter.onvif.0 : onvif : iobroker-lxc - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 system.adapter.parser.1 : parser : iobroker-lxc - disabled + system.adapter.ping.0 : ping : iobroker-lxc - enabled system.adapter.proxmox.0 : proxmox : iobroker-lxc - disabled, port: 8006 system.adapter.proxmox.1 : proxmox : iobroker-lxc - disabled, port: 8006 system.adapter.pushover.0 : pushover : iobroker-lxc - disabled system.adapter.radar2.0 : radar2 : iobroker-lxc - disabled system.adapter.scenes.0 : scenes : iobroker-lxc - disabled system.adapter.schoolfree.0 : schoolfree : iobroker-lxc - enabled + system.adapter.shelly.0 : shelly : iobroker-lxc - enabled, port: 1882, bind: 0.0.0.0 system.adapter.shuttercontrol.0 : shuttercontrol : iobroker-lxc - disabled + system.adapter.simple-api.0 : simple-api : iobroker-lxc - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : iobroker-lxc - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sourceanalytix.0 : sourceanalytix : iobroker-lxc - enabled + system.adapter.telegram.0 : telegram : iobroker-lxc - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : iobroker-lxc - enabled + system.adapter.time-switch.0 : time-switch : iobroker-lxc - enabled system.adapter.tr-064.0 : tr-064 : iobroker-lxc - disabled system.adapter.tractive-gps.0 : tractive-gps : iobroker-lxc - disabled + system.adapter.trashschedule.0 : trashschedule : iobroker-lxc - enabled + system.adapter.tuya.0 : tuya : iobroker-lxc - enabled + system.adapter.unifi.0 : unifi : iobroker-lxc - enabled + system.adapter.vds2465-server.0 : vds2465-server : iobroker-lxc - enabled system.adapter.vis-2-widgets-inventwo.0 : vis-2-widgets-inventwo: iobroker-lxc - enabled + system.adapter.vis-2.0 : vis-2 : iobroker-lxc - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : iobroker-lxc - enabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker-lxc - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker-lxc - enabled system.adapter.vis-justgage.0 : vis-justgage : iobroker-lxc - enabled system.adapter.vis.0 : vis : iobroker-lxc - enabled + system.adapter.web.0 : web : iobroker-lxc - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.web.1 : web : iobroker-lxc - enabled, port: 8083, bind: 0.0.0.0, run as: admin + system.adapter.windows-control.0 : windows-control : iobroker-lxc - enabled + system.adapter.wled.0 : wled : iobroker-lxc - enabled + system.adapter.ws.0 : ws : iobroker-lxc - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.yahka.1 : yahka : iobroker-lxc - enabled system.adapter.yr.0 : yr : iobroker-lxc - enabled + system.adapter.zigbee.0 : zigbee : iobroker-lxc - enabled, port: tcp://192.168.64.6:20108 system.adapter.zigbee.1 : zigbee : iobroker-lxc - disabled, port: tcp://192.168.72.0:6638 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker-lxc - enabled, port: 7777, bind: 0.0.0.0, run as: admin + system.adapter.hikvision-alarmserver.0 : hikvision-alarmserver : iobroker-lxc - enabled, port: 8089, bind: 192.168.64.3 + system.adapter.influxdb.0 : influxdb : iobroker-lxc - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : iobroker-lxc - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.onvif.0 : onvif : iobroker-lxc - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.shelly.0 : shelly : iobroker-lxc - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobroker-lxc - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : iobroker-lxc - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : iobroker-lxc - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker-lxc - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.web.1 : web : iobroker-lxc - enabled, port: 8083, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : iobroker-lxc - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker-lxc - enabled, port: tcp://192.168.64.6:20108 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Instances Used repository: stable Adapter "adguard" : 1.0.1 , installed 1.0.1 Adapter "admin" : 7.4.10 , installed 7.4.10 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "alias-manager": 2.0.0 , installed 2.0.0 Adapter "artnet" : 1.2.2 , installed 1.2.2 Adapter "backitup" : 3.0.31 , installed 3.0.31 Adapter "ble" : 0.14.0 , installed 0.14.0 Adapter "bring" : 1.8.4 , installed 1.8.4 Adapter "cameras" : 2.1.2 , installed 2.1.2 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "coronavirus-statistics": 0.9.0, installed 0.9.0 Adapter "countdown" : 2.3.0 , installed 2.3.0 Adapter "daikin" : 1.4.2 , installed 1.4.2 Adapter "daikin-cloud" : 0.4.11 , installed 0.4.11 Adapter "daswetter" : 3.2.2 , installed 3.2.2 Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "device-watcher": 2.12.1 , installed 2.12.1 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "doorio" : 2.1.5 , installed 2.1.5 Adapter "drag-indicator": 2.3.0 , installed 2.3.0 Adapter "ecovacs-deebot": 1.4.15 , installed 1.4.15 Adapter "email" : 1.3.1 , installed 1.3.1 Adapter "fakeroku" : 0.3.0 , installed 0.3.0 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "followthesun" : 0.5.1 , installed 0.5.1 Adapter "fullybrowser" : 3.0.12 , installed 3.0.12 Adapter "geofency" : 1.2.4 , installed 1.2.4 Adapter "habpanel" : 0.5.0 , installed 0.5.0 Adapter "harmony" : 1.5.0 , installed 1.5.0 Adapter "hass" : 1.4.0 , installed 1.4.0 Adapter "heatingcontrol": 2.12.13 , installed 2.12.13 Adapter "hikvision-alarmserver": 0.1.0, installed 0.1.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "ical" : 1.16.1 , installed 1.16.1 Adapter "iceroad" : 1.2.1 , installed 1.2.1 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "javascript" : 8.8.3 , installed 8.8.3 Controller "js-controller": 7.0.6 , installed 7.0.6 Adapter "material" : 1.3.1 , installed 1.3.1 Adapter "meater" : 1.1.1 , installed 1.1.1 Adapter "mielecloudservice": 6.5.7, installed 6.5.7 Adapter "modbus" : 6.3.2 , installed 6.3.2 Adapter "mqtt" : 6.1.2 , installed 6.1.2 Adapter "net-tools" : 1.0.11 , installed 1.0.11 Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "netatmo-energy": 2.7.3 , installed 2.7.3 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "notification-manager": 1.2.1, installed 1.2.1 Adapter "nut" : 1.6.0 , installed 1.6.0 Adapter "odl" : 4.0.2 , installed 4.0.2 Adapter "onvif" : 1.1.4 , installed 1.1.4 Adapter "parser" : 2.2.4 , installed 2.2.4 Adapter "pegelalarm" : 1.3.6 , installed 1.3.6 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "proxmox" : 2.3.0 , installed 2.3.0 Adapter "pushover" : 4.1.0 , installed 4.1.0 Adapter "radar2" : 2.2.0 , installed 2.2.0 Adapter "scenes" : 3.2.3 , installed 3.2.3 Adapter "schoolfree" : 1.1.6 , installed 1.1.6 Adapter "shelly" : 8.5.1 , installed 8.5.1 Adapter "shuttercontrol": 1.8.5 , installed 1.8.5 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.1.2 , installed 3.1.2 Adapter "telegram" : 3.9.0 , installed 3.9.0 Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "traccar" : 1.1.6 , installed 1.1.6 Adapter "tractive-gps" : 2.1.0 , installed 2.1.0 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "tuya" : 3.16.0 , installed 3.16.0 Adapter "tvprogram" : 2.1.0 , installed 2.1.0 Adapter "tvspielfilm" : 2.1.0 , installed 2.1.0 Adapter "unifi" : 0.7.0 , installed 0.7.0 Adapter "upnp" : 1.1.0 , installed 1.1.0 Adapter "vds2465-server": 1.0.0 , installed 1.0.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.9.64 , installed 2.9.64 Adapter "vis-2-widgets-inventwo": 0.1.11, installed 0.1.11 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-icontwo" : 1.11.0 , installed 1.6.3 [Updatable] Adapter "vis-inventwo" : 3.3.4 , installed 3.3.4 Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.1.1 Adapter "vis-justgage" : 2.1.7 , installed 2.1.7 Adapter "vis-map" : 1.1.2 , installed 1.1.2 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "windows-control": 0.1.5 , installed 0.1.5 Adapter "wled" : 0.7.2 , installed 0.7.2 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "yr" : 5.3.0 , installed 5.3.0 Adapter "zigbee" : 1.10.14 , installed 1.10.14 Adapter "zwave2" : 3.1.0 , installed 3.1.0 Objects and States Please stand by - This may take a while Objects: 290543 States: 165115 *** OS-Repositories and Updates *** Hit:1 http://ftp.debian.org/debian bullseye InRelease Hit:2 http://security.debian.org bullseye-security InRelease Hit:3 http://ftp.debian.org/debian bullseye-updates InRelease Hit:4 https://download.docker.com/linux/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Hit:6 https://packages.redis.io/deb bullseye InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:8086 0.0.0.0:* LISTEN 0 1064837313 557/docker-proxy tcp 0 0 0.0.0.0:4100 0.0.0.0:* LISTEN 1000 1064848955 1816/io.vds2465-ser tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN 104 1064827809 122/systemd-resolve tcp 0 0 0.0.0.0:5355 0.0.0.0:* LISTEN 104 1064827803 122/systemd-resolve tcp 0 0 0.0.0.0:3000 0.0.0.0:* LISTEN 0 1064832800 642/docker-proxy tcp 0 0 192.168.64.3:9093 0.0.0.0:* LISTEN 1000 1064838355 1420/io.fakeroku.0 tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 1064832300 1/init tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1000 1064840144 1553/io.mqtt.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1000 1064846774 1728/io.sonoff.0 tcp 0 0 192.168.64.3:8089 0.0.0.0:* LISTEN 1000 1064851585 2022/io.hikvision-a tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 110 1064832457 155/redis-server 12 tcp 0 0 127.0.0.1:34757 0.0.0.0:* LISTEN 1000 1064862872 2418/io.yahka.1 tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 1064832522 365/master tcp 0 0 0.0.0.0:8765 0.0.0.0:* LISTEN 0 1064826066 534/docker-proxy tcp 0 0 127.0.0.1:3493 0.0.0.0:* LISTEN 0 1064846541 1759/upsd tcp 0 0 0.0.0.0:41011 0.0.0.0:* LISTEN 1000 1064857178 2418/io.yahka.1 tcp 0 0 0.0.0.0:10001 0.0.0.0:* LISTEN 0 1064834543 549/docker-proxy tcp 0 0 0.0.0.0:10002 0.0.0.0:* LISTEN 0 1064834551 564/docker-proxy tcp 0 0 0.0.0.0:10003 0.0.0.0:* LISTEN 0 1064826073 596/docker-proxy tcp 0 0 0.0.0.0:10004 0.0.0.0:* LISTEN 0 1064834561 612/docker-proxy tcp 0 0 0.0.0.0:10005 0.0.0.0:* LISTEN 0 1064834572 634/docker-proxy tcp6 0 0 :::8082 :::* LISTEN 1000 1069858027 40890/io.web.0 tcp6 0 0 :::8083 :::* LISTEN 1000 1069861323 40889/io.web.1 tcp6 0 0 :::8084 :::* LISTEN 1000 1064852058 2407/io.ws.0 tcp6 0 0 :::8086 :::* LISTEN 0 1064837318 572/docker-proxy tcp6 0 0 :::8087 :::* LISTEN 1000 1064854009 2162/io.simple-api. tcp6 0 0 ::1:25 :::* LISTEN 0 1064832523 365/master tcp6 0 0 :::8000 :::* LISTEN 0 1064835476 809/portainer tcp6 0 0 :::7777 :::* LISTEN 1000 1064834910 1049/io.admin.0 tcp6 0 0 ::1:3493 :::* LISTEN 0 1064846542 1759/upsd tcp6 0 0 :::5355 :::* LISTEN 104 1064827806 122/systemd-resolve tcp6 0 0 :::3000 :::* LISTEN 0 1064833566 667/docker-proxy tcp6 0 0 :::22 :::* LISTEN 0 1064779650 1/init tcp6 0 0 :::111 :::* LISTEN 0 1064832302 1/init tcp6 0 0 ::1:6379 :::* LISTEN 110 1064832458 155/redis-server 12 tcp6 0 0 :::61991 :::* LISTEN 1000 1064838392 1466/io.harmony.0 tcp6 0 0 :::41741 :::* LISTEN 1000 1064854478 2418/io.yahka.1 tcp6 0 0 :::8765 :::* LISTEN 0 1064836504 541/docker-proxy tcp6 0 0 :::10001 :::* LISTEN 0 1064834546 555/docker-proxy tcp6 0 0 :::10002 :::* LISTEN 0 1064832789 579/docker-proxy tcp6 0 0 :::10003 :::* LISTEN 0 1064834556 603/docker-proxy tcp6 0 0 :::10004 :::* LISTEN 0 1064834567 624/docker-proxy tcp6 0 0 :::10005 :::* LISTEN 0 1064834577 645/docker-proxy tcp6 0 0 :::9443 :::* LISTEN 0 1064835480 809/portainer udp 0 0 127.0.0.53:53 0.0.0.0:* 104 1064827808 122/systemd-resolve udp 0 0 0.0.0.0:111 0.0.0.0:* 0 1064832301 1/init udp 0 0 0.0.0.0:1900 0.0.0.0:* 1000 1064838356 1420/io.fakeroku.0 udp 0 0 0.0.0.0:34706 0.0.0.0:* 1000 1090416276 1717/io.shelly.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1000 1064854479 2418/io.yahka.1 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1000 1064857175 2418/io.yahka.1 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1000 1064854958 2396/io.wled.0 udp 0 0 0.0.0.0:5355 0.0.0.0:* 104 1064827802 122/systemd-resolve udp 0 0 0.0.0.0:5683 0.0.0.0:* 1000 1064855597 1717/io.shelly.0 udp 0 0 0.0.0.0:6666 0.0.0.0:* 1000 1064826796 1762/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1000 1064826797 1762/io.tuya.0 udp 0 0 0.0.0.0:61991 0.0.0.0:* 1000 1064838393 1466/io.harmony.0 udp6 0 0 :::111 :::* 0 1064832303 1/init udp6 0 0 :::5355 :::* 104 1064827805 122/systemd-resolve *** Log File - Last 25 Lines *** 2025-01-11 18:30:07.546 - info: netatmo-crawler.0 (206367) Getting data for stationid:70:ee:50:74:3e:4c 2025-01-11 18:30:10.194 - info: netatmo-crawler.0 (206367) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2025-01-11 18:30:10.715 - info: host.iobroker-lxc instance system.adapter.netatmo-crawler.0 having pid 206367 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2025-01-11 18:30:27.559 - error: netatmo-energy.0 (1579) API-Anfrage nicht OK: 2025-01-11 18:30:32.636 - error: netatmo-energy.1 (1594) API-Anfrage nicht OK: 2025-01-11 18:30:41.046 - info: netatmo-energy.2 (1614) API-Anfrage starten: homesdata 2025-01-11 18:30:41.196 - error: netatmo-energy.2 (1614) API-Anfrage nicht OK: 2025-01-11 18:30:41.198 - info: netatmo-energy.2 (1614) API-Anfrage starten: homestatus 2025-01-11 18:30:41.456 - info: netatmo-energy.2 (1614) Method "deleteChannel" is deprecated and will be removed in js-controller 7.1, use "delObject" instead 2025-01-11 18:30:47.926 - info: netatmo-energy.3 (1630) API-Anfrage starten: homesdata 2025-01-11 18:30:48.050 - error: netatmo-energy.3 (1630) API-Anfrage nicht OK: 2025-01-11 18:30:48.051 - warn: telegram.0 (1223) 1 of 1 recipients are unknown! 2025-01-11 18:30:48.055 - info: netatmo-energy.3 (1630) API-Anfrage starten: homestatus 2025-01-11 18:30:48.247 - info: netatmo-energy.3 (1630) Method "deleteChannel" is deprecated and will be removed in js-controller 7.1, use "delObject" instead 2025-01-11 18:30:53.013 - info: host.iobroker-lxc instance system.adapter.daswetter.0 in version "3.2.2" started with pid 206736 2025-01-11 18:30:55.765 - info: daswetter.0 (206736) starting. Version 3.2.2 in /opt/iobroker/node_modules/iobroker.daswetter, node: v20.18.1, js-controller: 7.0.6 2025-01-11 18:31:00.451 - info: daswetter.0 (206736) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment 2025-01-11 18:31:00.964 - info: daswetter.0 (206736) cleaned everything up... 2025-01-11 18:31:00.991 - info: host.iobroker-lxc instance system.adapter.daswetter.0 having pid 206736 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2025-01-11 18:31:27.465 - error: netatmo-energy.0 (1579) API-Anfrage nicht OK: 2025-01-11 18:31:32.600 - error: netatmo-energy.1 (1594) API-Anfrage nicht OK: 2025-01-11 18:31:41.047 - info: netatmo-energy.2 (1614) API-Anfrage starten: homesdata 2025-01-11 18:31:41.167 - error: netatmo-energy.2 (1614) API-Anfrage nicht OK: 2025-01-11 18:31:41.169 - info: netatmo-energy.2 (1614) API-Anfrage starten: homestatus 2025-01-11 18:31:41.318 - info: netatmo-energy.2 (1614) Method "deleteChannel" is deprecated and will be removed in js-controller 7.1, use "delObject" instead
Support us
390
Online32.5k
Benutzer81.9k
Themen1.3m
Beiträge