Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[dragricola]

Systemdata	Bitte Ausfüllen
Hardwaresystem:	RasPi4.
Arbeitsspeicher:	3,7 GB
Festplattenart:	SSD M.2 über USB angeschlossen
Betriebssystem:	Raspberry Pi OS Bullseye 64 Bit
Node-Version:	10.x.x
Nodejs-Version:	v16.18.1
NPM-Version:	8.19.2
Installationsart:	Skript
Image genutzt:	Nein

Beim Versuch einen Adapter zu aktualisieren ist das System abgestürzt und lässt sich nicht mehr starten. iob staus liefert folgendes:

pi@raspberrypi4-iob:~ $ iob status
node:internal/modules/cjs/loader:1024
  throw err;
  ^

Error: Cannot find module './internal/re'
Require stack:
- /opt/iobroker/node_modules/semver/index.js
- /opt/iobroker/node_modules/@iobroker/js-controller-common/lib/common/tools.js
- /opt/iobroker/node_modules/@iobroker/js-controller-common/index.js
- /opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js
- /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js
    at Function.Module._resolveFilename (node:internal/modules/cjs/loader:1021:15)
    at Function.Module._load (node:internal/modules/cjs/loader:866:27)
    at Module.require (node:internal/modules/cjs/loader:1093:19)
    at require (node:internal/modules/cjs/helpers:108:18)
    at Object.<anonymous> (/opt/iobroker/node_modules/semver/index.js:2:20)
    at Module._compile (node:internal/modules/cjs/loader:1191:14)
    at Object.Module._extensions..js (node:internal/modules/cjs/loader:1245:10)
    at Module.load (node:internal/modules/cjs/loader:1069:32)
    at Function.Module._load (node:internal/modules/cjs/loader:904:12)
    at Module.require (node:internal/modules/cjs/loader:1093:19) {
  code: 'MODULE_NOT_FOUND',
  requireStack: [
    '/opt/iobroker/node_modules/semver/index.js',
    '/opt/iobroker/node_modules/@iobroker/js-controller-common/lib/common/tools.js',
    '/opt/iobroker/node_modules/@iobroker/js-controller-common/index.js',
    '/opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js',
    '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
  ]
}
pi@raspberrypi4-iob:~ $

Wer kann mir helfen ioBroker wieder zum Laufen zu bringen?

[Thomas Braun]

@dragricola

Versuch mal

cd /opt/iobroker && sudo -H -u iobroker npm install iobroker.js-controller
iob restart

[dragricola]

@thomas-braun said in IOB startet nach Adapter-Update nicht mehr:

cd /opt/iobroker && sudo -H -u iobroker npm install iobroker.js-controller

Das liefert folgendes:

pi@raspberrypi4-iob:~ $ cd /opt/iobroker && sudo -H -u iobroker npm install iobroker.js-controller
npm ERR! code ENOTEMPTY
npm ERR! syscall rename
npm ERR! path /opt/iobroker/node_modules/fast-glob
npm ERR! dest /opt/iobroker/node_modules/.fast-glob-suIaIPfF
npm ERR! errno -39
npm ERR! ENOTEMPTY: directory not empty, rename '/opt/iobroker/node_modules/fast-glob' -> '/opt/iobroker/node_modules/.fast-glob-suIaIPfF'

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2023-07-07T17_47_22_038Z-debug-0.log
pi@raspberrypi4-iob:/opt/iobroker $

Danach startet iob leider nicht.

[Thomas Braun]

@dragricola

Dann den Fixer versuchen.

iob stop
iob fix
cd /opt/iobroker && sudo -H -u iobroker npm install iobroker.js-controller
iob restart

[dragricola]

@thomas-braun said in IOB startet nach Adapter-Update nicht mehr:

iob restart

Es tut sich was! IOB startet gerade wieder. Vielen Dank für die schnelle Hilfe!

[Thomas Braun]

@dragricola

Dann kannst du jetzt mal

iob diag

anschauen.

[dragricola]

@thomas-braun said in IOB startet nach Adapter-Update nicht mehr:

iob diag

Bis auf den folgenden Abschnitt "OS-Repositories and Updates" schein alles in Ordnung zu sein:

*** OS-Repositories and Updates ***
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Failed to fetch https://repos.influxdata.com/debian/dists/stable/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Failed to fetch https://repos.influxdata.com/debian/dists/bullseye/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Some index files failed to download. They have been ignored, or old ones used instead.
Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
Hit:3 http://security.debian.org/debian-security bullseye-security InRelease
Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:5 https://cli.github.com/packages stable InRelease
Get:6 https://repos.influxdata.com/debian stable InRelease [6892 B]
Get:7 https://repos.influxdata.com/debian bullseye InRelease [7040 B]
Hit:8 https://deb.nodesource.com/node_16.x bullseye InRelease
Err:6 https://repos.influxdata.com/debian stable InRelease
  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
Err:7 https://repos.influxdata.com/debian bullseye InRelease
  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
Fetched 13.9 kB in 2s (5843 B/s)
Reading package lists...
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Failed to fetch https://repos.influxdata.com/debian/dists/stable/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Failed to fetch https://repos.influxdata.com/debian/dists/bullseye/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Some index files failed to download. They have been ignored, or old ones used instead.
Pending Updates: 108

Das bezieht sich wohl alles auf Influx. Die Datenbank hatte ich früher mal installiert, nun verwende ich sie jedoch nicht mehr. Wie werde ich diese Fehlermeldungen wieder los?

[Thomas Braun]

@dragricola

Vollständig bitte.

[dragricola]

@thomas-braun

Hier ist der vollständige Auszug:

Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.1
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 20:13:19 up  1:13,  1 user,  load average: 1.75, 1.64, 1.33
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=47.7'C
volt=0.8438V

*** Time and Time Zones ***
               Local time: Fri 2023-07-07 20:13:19 CEST
           Universal time: Fri 2023-07-07 18:13:19 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.8G        2.4G         85M        4.0M        1.3G        1.3G
Swap:            99M        3.0M         96M
Total:          3.9G        2.4G        182M

         3793 M total memory
         2428 M used memory
          677 M active memory
         2776 M inactive memory
           85 M free memory
          134 M buffer memory
         1144 M swap cache
           99 M total swap
            3 M used swap
           96 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      118G   12G  101G  11% /
devtmpfs       devtmpfs  1.7G     0  1.7G   0% /dev
tmpfs          tmpfs     1.9G  752K  1.9G   1% /dev/shm
tmpfs          tmpfs     759M  1.2M  758M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/sda1      vfat      255M   31M  225M  12% /boot
tmpfs          tmpfs     380M     0  380M   0% /run/user/999
tmpfs          tmpfs     380M     0  380M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Fri Jul  7 18:59:30 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=DC:A6:32:32:93:63 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=tty1 root=PARTUUID=a1185881-02 rootfstype=ext4 fsck.repair=yes rootwait fsck.mode=force
[Fri Jul  7 18:59:31 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[Fri Jul  7 18:59:31 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[Fri Jul  7 18:59:47 2023] EXT4-fs (sda2): re-mounted. Opts: (null). Quota mode: none.

Show mounted filesystems (real ones only):
TARGET  SOURCE    FSTYPE OPTIONS
/       /dev/sda2 ext4   rw,noatime
`-/boot /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
6.0G    /var/
4.5G    /var/lib
2.3G    /var/lib/mysql
2.1G    /var/lib/mysql/iobroker
1.9G    /var/lib/redis

Archived and active journals take up 992.3M in the file system.

/opt/iobroker/backups:
333M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
506M    /opt/iobroker/iobroker-data/
342M    /opt/iobroker/iobroker-data/files
116M    /opt/iobroker/iobroker-data/backup-objects
55M     /opt/iobroker/iobroker-data/files/material
53M     /opt/iobroker/iobroker-data/files/material/static

The five largest files in iobroker-data are:
41M     /opt/iobroker/iobroker-data/files/material/static/js/main.c5478f66.js.map
35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
32M     /opt/iobroker/iobroker-data/objects.jsonl
18M     /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.274a4d8d.js.map
15M     /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v16.19.1
/usr/bin/node           v16.19.1
/usr/bin/npm            8.19.3
/usr/bin/npx            8.19.3


nodejs:
  Installed: 16.19.1-deb-1nodesource1
  Candidate: 16.20.1-deb-1nodesource1
  Version table:
     16.20.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_16.x bullseye/main arm64 Packages
 *** 16.19.1-deb-1nodesource1 100
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.12~dfsg-1~deb11u3 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.3.5
javascript:     7.0.3

Adapters from github:   2

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi4-iob                         -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alias-manager.0          : alias-manager         : raspberrypi4-iob                         -  enabled
+ system.adapter.alpha2.0                 : alpha2                : raspberrypi4-iob                         -  enabled
+ system.adapter.backitup.0               : backitup              : raspberrypi4-iob                         -  enabled
  system.adapter.coronavirus-statistics.0 : coronavirus-statistics: raspberrypi4-iob                         - disabled
  system.adapter.daswetter.0              : daswetter             : raspberrypi4-iob                         -  enabled
  system.adapter.denon.0                  : denon                 : raspberrypi4-iob                         - disabled
  system.adapter.devices.0                : devices               : raspberrypi4-iob                         -  enabled
  system.adapter.discovery.0              : discovery             : raspberrypi4-iob                         - disabled
  system.adapter.dwd.0                    : dwd                   : raspberrypi4-iob                         -  enabled
+ system.adapter.energiefluss.0           : energiefluss          : raspberrypi4-iob                         -  enabled
  system.adapter.feiertage.0              : feiertage             : raspberrypi4-iob                         -  enabled
  system.adapter.flot.0                   : flot                  : raspberrypi4-iob                         -  enabled
+ system.adapter.fritzdect.0              : fritzdect             : raspberrypi4-iob                         -  enabled
+ system.adapter.homeconnect.0            : homeconnect           : raspberrypi4-iob                         -  enabled
  system.adapter.ical.0                   : ical                  : raspberrypi4-iob                         -  enabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : raspberrypi4-iob                         -  enabled
+ system.adapter.info.0                   : info                  : raspberrypi4-iob                         -  enabled
+ system.adapter.javascript.0             : javascript            : raspberrypi4-iob                         -  enabled
  system.adapter.javascript.1             : javascript            : raspberrypi4-iob                         - disabled
  system.adapter.luftdaten.0              : luftdaten             : raspberrypi4-iob                         -  enabled
  system.adapter.material.0               : material              : raspberrypi4-iob                         -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi4-iob                         -  enabled, port: 1884, bind: 0.0.0.0
+ system.adapter.net-tools.0              : net-tools             : raspberrypi4-iob                         -  enabled
+ system.adapter.nuki-extended.0          : nuki-extended         : raspberrypi4-iob                         -  enabled
+ system.adapter.octoprint.0              : octoprint             : raspberrypi4-iob                         -  enabled
  system.adapter.panasonic-viera.0        : panasonic-viera       : raspberrypi4-iob                         - disabled
  system.adapter.panasonic-viera.1        : panasonic-viera       : raspberrypi4-iob                         - disabled
+ system.adapter.pi-hole.0                : pi-hole               : raspberrypi4-iob                         -  enabled
+ system.adapter.ping.0                   : ping                  : raspberrypi4-iob                         -  enabled
  system.adapter.pushover.0               : pushover              : raspberrypi4-iob                         - disabled
  system.adapter.rpi2.0                   : rpi2                  : raspberrypi4-iob                         - disabled
+ system.adapter.shuttercontrol.0         : shuttercontrol        : raspberrypi4-iob                         -  enabled
+ system.adapter.simple-api.0             : simple-api            : raspberrypi4-iob                         -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
  system.adapter.socketio.0               : socketio              : raspberrypi4-iob                         - disabled, port: 8085, bind: 0.0.0.0, run as: admin
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi4-iob                         -  enabled, port: 1883, bind: 0.0.0.0
  system.adapter.sourceanalytix.0         : sourceanalytix        : raspberrypi4-iob                         - disabled
+ system.adapter.sql.0                    : sql                   : raspberrypi4-iob                         -  enabled, port: 3306
  system.adapter.synology.0               : synology              : raspberrypi4-iob                         - disabled, port: 5000
+ system.adapter.tankerkoenig.0           : tankerkoenig          : raspberrypi4-iob                         -  enabled
+ system.adapter.telegram.0               : telegram              : raspberrypi4-iob                         -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.text2command.0           : text2command          : raspberrypi4-iob                         -  enabled
+ system.adapter.tr-064.0                 : tr-064                : raspberrypi4-iob                         -  enabled
  system.adapter.tr-064.1                 : tr-064                : raspberrypi4-iob                         - disabled
  system.adapter.tr-064.2                 : tr-064                : raspberrypi4-iob                         - disabled
+ system.adapter.trashschedule.0          : trashschedule         : raspberrypi4-iob                         -  enabled
  system.adapter.vis-colorpicker.0        : vis-colorpicker       : raspberrypi4-iob                         -  enabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : raspberrypi4-iob                         -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : raspberrypi4-iob                         -  enabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : raspberrypi4-iob                         -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : raspberrypi4-iob                         -  enabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : raspberrypi4-iob                         -  enabled
  system.adapter.vis-metro.0              : vis-metro             : raspberrypi4-iob                         -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : raspberrypi4-iob                         -  enabled
  system.adapter.vis-weather.0            : vis-weather           : raspberrypi4-iob                         -  enabled
  system.adapter.vis.0                    : vis                   : raspberrypi4-iob                         -  enabled
  system.adapter.weatherunderground.0     : weatherunderground    : raspberrypi4-iob                         -  enabled
+ system.adapter.web.0                    : web                   : raspberrypi4-iob                         -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.web.1                    : web                   : raspberrypi4-iob                         -  enabled, port: 20002, bind: 0.0.0.0, run as: admin
+ system.adapter.ws.0                     : ws                    : raspberrypi4-iob                         -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi4-iob                         -  enabled, port: /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi4-iob                         -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi4-iob                         -  enabled, port: 1884, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : raspberrypi4-iob                         -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi4-iob                         -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.sql.0                    : sql                   : raspberrypi4-iob                         -  enabled, port: 3306
+ system.adapter.telegram.0               : telegram              : raspberrypi4-iob                         -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : raspberrypi4-iob                         -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.web.1                    : web                   : raspberrypi4-iob                         -  enabled, port: 20002, bind: 0.0.0.0, run as: admin
+ system.adapter.ws.0                     : ws                    : raspberrypi4-iob                         -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi4-iob                         -  enabled, port: /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
Beta (latest) : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "alias-manager": 1.2.4    , installed 1.2.4
Adapter    "alpha2"       : 1.0.0    , installed 1.0.4
Adapter    "backitup"     : 2.6.23   , installed 2.6.23
Adapter    "coronavirus-statistics": 0.8.7, installed 0.8.7
Adapter    "daswetter"    : 3.1.8    , installed 3.1.8
Adapter    "denon"        : 1.15.2   , installed 1.15.0 [Updatable]
Adapter    "devices"      : 1.1.5    , installed 1.1.5
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "dwd"          : 2.8.3    , installed 2.8.3
Adapter    "feiertage"    : 1.1.0    , installed 1.1.0
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "fritzdect"    : 2.3.1    , installed 2.3.1
Adapter    "homeconnect"  : 1.1.1    , installed 1.1.1
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "info"         : 1.9.26   , installed 1.9.26
Adapter    "javascript"   : 7.0.3    , installed 7.0.3
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "luftdaten"    : 2.2.4    , installed 2.2.4
Adapter    "material"     : 1.3.1    , installed 1.3.1
Adapter    "mqtt"         : 4.1.1    , installed 4.1.1
Adapter    "net-tools"    : 0.2.0    , installed 0.2.0
Adapter    "nuki-extended": 2.6.5    , installed 2.6.5
Adapter    "octoprint"    : 4.0.0    , installed 4.0.0
Adapter    "panasonic-viera": 2.0.0  , installed 2.0.0
Adapter    "pi-hole"      : 1.3.6    , installed 1.3.6
Adapter    "ping"         : 1.5.3    , installed 1.5.3
Adapter    "pushover"     : 3.0.3    , installed 3.0.3
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "shuttercontrol": 1.5.0   , installed 1.5.0
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "sonoff"       : 2.5.3    , installed 2.5.3
Adapter    "sql"          : 2.2.0    , installed 2.2.0
Adapter    "synology"     : 2.1.13   , installed 2.1.13
Adapter    "tankerkoenig" : 3.3.7    , installed 3.3.7
Adapter    "telegram"     : 1.15.6   , installed 1.15.6
Adapter    "text2command" : 3.0.2    , installed 3.0.2
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "trashschedule": 2.2.0    , installed 2.2.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-colorpicker": 2.0.3  , installed 2.0.3
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "vis-icontwo"  : 0.96.0   , installed 0.94.0 [Updatable]
Adapter    "vis-jqui-mfd" : 1.0.12   , installed 1.0.12
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vis-weather"  : 2.5.6    , installed 2.5.6
Adapter    "weatherunderground": 3.4.2, installed 3.4.2
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0
Adapter    "zigbee"       : 1.8.12   , installed 1.8.12

Objects and States
Please stand by - This may take a while
Objects:        17507
States:         14866

*** OS-Repositories and Updates ***
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Failed to fetch https://repos.influxdata.com/debian/dists/stable/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Failed to fetch https://repos.influxdata.com/debian/dists/bullseye/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Some index files failed to download. They have been ignored, or old ones used instead.
Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
Hit:3 http://security.debian.org/debian-security bullseye-security InRelease
Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:5 https://cli.github.com/packages stable InRelease
Get:6 https://repos.influxdata.com/debian stable InRelease [6892 B]
Get:7 https://repos.influxdata.com/debian bullseye InRelease [7040 B]
Hit:8 https://deb.nodesource.com/node_16.x bullseye InRelease
Err:6 https://repos.influxdata.com/debian stable InRelease
  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
Err:7 https://repos.influxdata.com/debian bullseye InRelease
  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
Fetched 13.9 kB in 2s (5843 B/s)
Reading package lists...
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Failed to fetch https://repos.influxdata.com/debian/dists/stable/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Failed to fetch https://repos.influxdata.com/debian/dists/bullseye/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Some index files failed to download. They have been ignored, or old ones used instead.
Pending Updates: 108

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       88332      14458/iobroker.js-c
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       89214      14458/iobroker.js-c
tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN      0          14106      872/lighttpd
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          14504      570/sshd: /usr/sbin
tcp        0      0 0.0.0.0:53              0.0.0.0:*               LISTEN      999        14164      910/pihole-FTL
tcp        0      0 127.0.0.1:4711          0.0.0.0:*               LISTEN      999        14662      910/pihole-FTL
tcp        0      0 0.0.0.0:8765            0.0.0.0:*               LISTEN      0          13119      414/python2
tcp        0      0 127.0.0.1:7999          0.0.0.0:*               LISTEN      0          14562      711/motion
tcp        0      0 0.0.0.0:1080            0.0.0.0:*               LISTEN      1000       151901     26854/nc
tcp        0      0 0.0.0.0:8089            0.0.0.0:*               LISTEN      0          14561      711/motion
tcp        0      0 0.0.0.0:1884            0.0.0.0:*               LISTEN      1001       89867      14735/io.mqtt.0
tcp        0      0 0.0.0.0:1885            0.0.0.0:*               LISTEN      1001       89868      14735/io.mqtt.0
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       89693      14769/io.sonoff.0
tcp6       0      0 :::80                   :::*                    LISTEN      0          14107      872/lighttpd
tcp6       0      0 :::22                   :::*                    LISTEN      0          11932      570/sshd: /usr/sbin
tcp6       0      0 :::53                   :::*                    LISTEN      999        14166      910/pihole-FTL
tcp6       0      0 :::3306                 :::*                    LISTEN      111        13756      636/mariadbd
tcp6       0      0 :::20002                :::*                    LISTEN      1001       96535      15501/io.web.1
tcp6       0      0 :::8084                 :::*                    LISTEN      1001       96552      15518/io.ws.0
tcp6       0      0 :::8087                 :::*                    LISTEN      1001       97786      15426/io.simple-api
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       86656      14614/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       98376      15477/io.web.0
tcp6       0      0 ::1:4711                :::*                    LISTEN      999        14663      910/pihole-FTL
udp        0      0 192.168.178.126:5353    0.0.0.0:*                           1001       90039      14825/io.tr-064.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        11639      396/avahi-daemon: r
udp        0      0 0.0.0.0:55204           0.0.0.0:*                           108        11641      396/avahi-daemon: r
udp        0      0 0.0.0.0:53              0.0.0.0:*                           999        14163      910/pihole-FTL
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          12000      840/dhcpcd
udp6       0      0 :::546                  :::*                                0          12013      840/dhcpcd
udp6       0      0 :::54157                :::*                                108        11642      396/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                108        11640      396/avahi-daemon: r
udp6       0      0 :::53                   :::*                                999        14165      910/pihole-FTL

*** Log File - Last 25 Lines ***

2023-07-07 20:13:14.829  - info: weatherunderground.0 (24042) State value to set for "weatherunderground.0.forecastHourly.29h.precipitation" has to be type "value.precipitation" but received type "number"
2023-07-07 20:13:14.942  - info: weatherunderground.0 (24042) State value to set for "weatherunderground.0.forecastHourly.30h.precipitation" has to be type "value.precipitation" but received type "number"
2023-07-07 20:13:15.090  - info: weatherunderground.0 (24042) State value to set for "weatherunderground.0.forecastHourly.31h.precipitation" has to be type "value.precipitation" but received type "number"
2023-07-07 20:13:15.213  - info: weatherunderground.0 (24042) State value to set for "weatherunderground.0.forecastHourly.32h.precipitation" has to be type "value.precipitation" but received type "number"
2023-07-07 20:13:15.325  - info: weatherunderground.0 (24042) State value to set for "weatherunderground.0.forecastHourly.33h.precipitation" has to be type "value.precipitation" but received type "number"
2023-07-07 20:13:15.433  - info: weatherunderground.0 (24042) State value to set for "weatherunderground.0.forecastHourly.34h.precipitation" has to be type "value.precipitation" but received type "number"
2023-07-07 20:13:15.542  - info: weatherunderground.0 (24042) State value to set for "weatherunderground.0.forecastHourly.35h.precipitation" has to be type "value.precipitation" but received type "number"
2023-07-07 20:13:16.025  - info: javascript.0 (14656) script.js.common.Energie.Badheizung_PI-Regler_OK: Automaticmode: Reglerinput:  -0.072, Output: 74.69296708860759, Eingeschaltet:  true, Temperatur:  22.19
2023-07-07 20:13:17.900  - info: weatherunderground.0 (24042) Terminated (NO_ERROR): Without reason
2023-07-07 20:13:18.435  - info: host.raspberrypi4-iob instance system.adapter.weatherunderground.0 terminated with code 0 (NO_ERROR)
2023-07-07 20:13:26.088  - info: javascript.0 (14656) script.js.common.Energie.Badheizung_PI-Regler_OK: Automaticmode: Reglerinput:  -0.073, Output: 72.82246329113924, Eingeschaltet:  true, Temperatur:  22.19
2023-07-07 20:13:35.996  - info: javascript.0 (14656) script.js.common.Energie.Badheizung_PI-Regler_OK: Automaticmode: Reglerinput:  -0.028, Output: 73.01828101265822, Eingeschaltet:  true, Temperatur:  22.19
2023-07-07 20:13:40.636  - info: javascript.0 (14656) script.js.common.Sicherheit.Bewegungserkennung: 20:13:40.635 empfangen: 680
2023-07-07 20:13:46.138  - info: javascript.0 (14656) script.js.common.Energie.Badheizung_PI-Regler_OK: Automaticmode: Reglerinput:  0.019, Output: 74.44742278481012, Eingeschaltet:  true, Temperatur:  22.19
2023-07-07 20:13:56.026  - info: javascript.0 (14656) script.js.common.Energie.Badheizung_PI-Regler_OK: Automaticmode: Reglerinput:  -0.071, Output: 70.87619746835442, Eingeschaltet:  true, Temperatur:  22.19
2023-07-07 20:14:00.203  - info: host.raspberrypi4-iob instance system.adapter.luftdaten.0 started with pid 25159
2023-07-07 20:14:05.233  - info: luftdaten.0 (25159) starting. Version 2.2.4 in /opt/iobroker/node_modules/iobroker.luftdaten, node: v16.19.1, js-controller: 4.0.24
2023-07-07 20:14:06.078  - info: luftdaten.0 (25159) Terminated (NO_ERROR): Without reason
2023-07-07 20:14:06.118  - info: javascript.0 (14656) script.js.common.Energie.Badheizung_PI-Regler_OK: Automaticmode: Reglerinput:  -0.064, Output: 69.37909367088606, Eingeschaltet:  true, Temperatur:  22.19
2023-07-07 20:14:07.809  - info: host.raspberrypi4-iob instance system.adapter.luftdaten.0 terminated with code 0 (NO_ERROR)
2023-07-07 20:14:18.803  - info: javascript.0 (14656) script.js.common.Energie.Badheizung_PI-Regler_OK: Automaticmode: Reglerinput:  -0.032, Output: 68.99695696202531, Eingeschaltet:  true, Temperatur:  22.19
2023-07-07 20:14:21.858  - info: javascript.0 (14656) script.js.common.Sicherheit.Bewegungserkennung: 20:14:21.858 empfangen: ABB_Alarmanlage_aus
2023-07-07 20:14:25.988  - info: javascript.0 (14656) script.js.common.Energie.Badheizung_PI-Regler_OK: Automaticmode: Reglerinput:  -0.018, Output: 68.94539240506329, Eingeschaltet:  true, Temperatur:  22.19
2023-07-07 20:14:36.084  - info: javascript.0 (14656) script.js.common.Energie.Badheizung_PI-Regler_OK: Automaticmode: Reglerinput:  -0.071, Output: 66.07803797468354, Eingeschaltet:  true, Temperatur:  22.19
2023-07-07 20:14:46.139  - info: javascript.0 (14656) script.js.common.Energie.Badheizung_PI-Regler_OK: Automaticmode: Reglerinput:  -0.014, Output: 66.86034683544304, Eingeschaltet:  true, Temperatur:  22.19

[Thomas Braun]

@dragricola

sudo rm /etc/apt/sources.list.d/influx*
sudo apt-mark hold udev
iob stop
sudo apt update
sudo apt full-upgrade
sudo reboot