Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[Dieter_P]

Hi

leider ist es wieder mal soweit und mein BT3 Pro ist nicht mehr per SSH erreichbar. Da einfach Stecker ziehen meist zur kompletten Neuinstallation führt hab ich lokal ein Display drangehangen und bekomme die Fehlermeldung:

Lässt sich daraus auf etwas deuten?
Was sollte ich tun? Thx

[DJMarc75]

@dieter_p sagte in Linux PowerCut vermeiden; Fehlermeldung BT3 Pro?:

Was sollte ich tun?

Das mal lesen, könnte ja, unabhängig von Deinem BT3, passend sein.

https://github.com/linux-surface/linux-surface/issues/1095

[Dieter_P]

@djmarc75 said in Linux PowerCut vermeiden; Fehlermeldung BT3 Pro?:

@dieter_p sagte in Linux PowerCut vermeiden; Fehlermeldung BT3 Pro?:

Was sollte ich tun?

Das mal lesen, könnte ja, unabhängig von Deinem BT3, passend sein.

https://github.com/linux-surface/linux-surface/issues/1095

tjo, schön zu lesen. Wenn ich es richtig verstehe wurde es im Mai in Ubuntu bereits angepasst. Bei mir läuft Debian 11 (64-Bit) und kann nicht abstreiten, dass System zu letzt im Mai aktualisiert zu haben. Seitdem läuft es und habe seit heute die Fehlfunktion ohne einen Reboot bemerkt zu haben.

Ein Update durchzuführen ohne möglichen Reboot klingt aber unmöglich, oder?

Also wiedermal das Ding komplett neu aufsetzen in der Hoffnung, dass es aktuell gefixt ist?

P.S.: Da fällt mir ein, es gibt noch ein 2tes Produktivsystem ebenfalls mit der Hard- und Software. Dies läuft aktuell noch. Gibt Infos ob dies gefixt ist?

[Thomas Braun]

@dieter_p sagte in Linux PowerCut vermeiden; Fehlermeldung BT3 Pro?:

Was sollte ich tun?

Bekommst du das mit dem MagicSysReq in den Griff?

https://de.wikipedia.org/wiki/Klammergriff#Linux

Dann würde ich die Gelegenheit nutzen und das frisch releaste Debian 12 'Bookworm' installieren. Natürlich wie üblich OHNE Desktop.
Das Kernelmodul intel_atomicsp2_pm verorte ich auch im GUI-Umfeld, dürfte auf einem Server keine Rolle spielen und gar nicht benötigt werden.

[Dieter_P]

@thomas-braun said in Linux PowerCut vermeiden; Fehlermeldung BT3 Pro?:

@dieter_p sagte in Linux PowerCut vermeiden; Fehlermeldung BT3 Pro?:

Was sollte ich tun?

Bekommst du das mit dem MagicSysReq in den Griff?

https://de.wikipedia.org/wiki/Klammergriff#Linux

Probiere ich gerne aus, wenn Du das sagst.

Dann würde ich die Gelegenheit nutzen und das frisch releaste Debian 12 'Bookworm' installieren. Natürlich wie üblich OHNE Desktop.
Das Kernelmodul intel_atomicsp2_pm verorte ich auch im GUI-Umfeld, dürfte auf einem Server keine Rolle spielen und gar nicht benötigt werden.

Soweit ich weiß, ist keine Desktopumgebung bei mir installiert.

[Dieter_P]

@thomas-braun said in Linux PowerCut vermeiden; Fehlermeldung BT3 Pro?:

@dieter_p sagte in Linux PowerCut vermeiden; Fehlermeldung BT3 Pro?:

Was sollte ich tun?

Bekommst du das mit dem MagicSysReq in den Griff?

https://de.wikipedia.org/wiki/Klammergriff#Linux

Danke! Nach einem Reboot darüber (ALT+Druck dann REISUB) läuft der IObroker etc wieder. Nach kurzer Zeit kommen zwar wieder diese PowerState Meldungen aber IObroker etc läuft weiter.

Änderung hat leider auch kein Update des Debian 11 gebracht. Bleibt dann nur kurzfristig auf Debian 12 zu wechseln.

[Thomas Braun]

@dieter_p

Was spuckt denn

iob diag

in der Langfassung dazu aus?

[Dieter_P]

@thomas-braun said in Linux PowerCut vermeiden; Fehlermeldung BT3 Pro?:

@dieter_p

Was spuckt denn

iob diag

in der Langfassung dazu aus?

Hoffe das ist mit Langfassung gemeint:

Skript v.2023-04-16

*** BASE SYSTEM ***
Architecture    : x86_64
Docker          : false
Virtualization  : none
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 15:30:27 up 17 min,  1 user,  load average: 0.06, 0.14, 0.18
CPU threads: 4


*** Time and Time Zones ***
               Local time: Mon 2023-06-19 15:30:27 CEST
           Universal time: Mon 2023-06-19 13:30:27 UTC
                 RTC time: Mon 2023-06-19 13:30:27
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi cdrom floppy sudo audio dip video plugdev netdev bluetooth iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.9G        1.3G        2.1G        1.0M        461M        2.3G
Swap:           976M          0B        976M
Total:          4.8G        1.3G        3.1G

         3860 M total memory
         1310 M used memory
          182 M active memory
         1423 M inactive memory
         2089 M free memory
           36 M buffer memory
          425 M swap cache
          976 M total swap
            0 M used swap
          976 M free swap

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.9G     0  1.9G   0% /dev
tmpfs          tmpfs     387M  1.2M  385M   1% /run
/dev/mmcblk2p2 ext4       55G   24G   29G  45% /
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     5.0M     0  5.0M   0% /run/lock
/dev/mmcblk2p1 vfat      511M  5.8M  506M   2% /boot/efi
tmpfs          tmpfs     387M     0  387M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Mon Jun 19 15:13:13 2023] EXT4-fs (mmcblk2p2): mounted filesystem with ordered data mode. Opts: (null)
[Mon Jun 19 15:13:14 2023] EXT4-fs (mmcblk2p2): re-mounted. Opts: errors=remount-ro

Show mounted filesystems (real ones only):
TARGET      SOURCE         FSTYPE OPTIONS
/           /dev/mmcblk2p2 ext4   rw,relatime,errors=remount-ro
`-/boot/efi /dev/mmcblk2p1 vfat   rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro

Files in neuralgic directories:

/var:
6.4G    /var/
5.5G    /var/lib
5.3G    /var/lib/influxdb/engine/data/4f92bd04e9fbefda/autogen
5.3G    /var/lib/influxdb/engine/data/4f92bd04e9fbefda
5.3G    /var/lib/influxdb/engine/data

Hint: You are currently not seeing messages from other users and the system.
      Users in groups 'adm', 'systemd-journal' can see all messages.
      Pass -q to turn off this notice.
Archived and active journals take up 40.0M in the file system.

/opt/iobroker/backups:
12G     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
du: cannot read directory '/opt/iobroker/iobroker-data/esphome.0/.esphome/build/esphome-web-9fb8e8/.piolibdeps/esphome-web-9fb8e8/noise-c': Permission denied
du: cannot read directory '/opt/iobroker/iobroker-data/esphome.0/.esphome/build/esphome-web-9fb8e8/.piolibdeps/esphome-web-9fb8e8/libsodium': Permission denied
du: cannot read directory '/opt/iobroker/iobroker-data/esphome.0/.esphome/build/esphome-web-9fb8e8/.piolibdeps/esphome-web-9fb8e8/ESPAsyncWebServer-esphome': Permission denied
du: cannot read directory '/opt/iobroker/iobroker-data/esphome.0/.esphome/build/esphome-web-9fb8e8/.piolibdeps/esphome-web-9fb8e8/AsyncTCP-esphome': Permission denied
du: cannot read directory '/opt/iobroker/iobroker-data/esphome.0/.esphome/build/esphome-web-9fb8e8/.piolibdeps/esphome-web-9fb8e8/FastLED': Permission denied
842M    /opt/iobroker/iobroker-data/
607M    /opt/iobroker/iobroker-data/esphome.0/.esphome
607M    /opt/iobroker/iobroker-data/esphome.0
606M    /opt/iobroker/iobroker-data/esphome.0/.esphome/build
171M    /opt/iobroker/iobroker-data/esphome.0/.esphome/build/ddorf

The five largest files in iobroker-data are:
find: '/opt/iobroker/iobroker-data/esphome.0/.esphome/build/esphome-web-9fb8e8/.piolibdeps/esphome-web-9fb8e8/noise-c': Permission denied
find: '/opt/iobroker/iobroker-data/esphome.0/.esphome/build/esphome-web-9fb8e8/.piolibdeps/esphome-web-9fb8e8/libsodium': Permission denied
find: '/opt/iobroker/iobroker-data/esphome.0/.esphome/build/esphome-web-9fb8e8/.piolibdeps/esphome-web-9fb8e8/ESPAsyncWebServer-esphome': Permission denied
find: '/opt/iobroker/iobroker-data/esphome.0/.esphome/build/esphome-web-9fb8e8/.piolibdeps/esphome-web-9fb8e8/AsyncTCP-esphome': Permission denied
find: '/opt/iobroker/iobroker-data/esphome.0/.esphome/build/esphome-web-9fb8e8/.piolibdeps/esphome-web-9fb8e8/FastLED': Permission denied
31M     /opt/iobroker/iobroker-data/objects.jsonl
30M     /opt/iobroker/iobroker-data/esphome.0/.esphome/build/esp32-flur/.pioenvs/esp32-flur/firmware.elf
29M     /opt/iobroker/iobroker-data/esphome.0/.esphome/build/esphome-web-9fb8e8/.pioenvs/esphome-web-9fb8e8/firmware.elf
24M     /opt/iobroker/iobroker-data/esphome.0/.esphome/build/ddorf/.pioenvs/ddorf/libFrameworkArduino.a
24M     /opt/iobroker/iobroker-data/esphome.0/.esphome/build/dddorf-wroom32/.pioenvs/dddorf-wroom32/libFrameworkArduino.a

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.16.0
/usr/bin/node           v18.16.0
/usr/bin/npm            9.5.1
/usr/bin/npx            9.5.1


nodejs:
  Installed: 18.16.0-deb-1nodesource1
  Candidate: 18.16.0-deb-1nodesource1
  Version table:
 *** 18.16.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main amd64 Packages
        100 /var/lib/dpkg/status
     16.20.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_16.x bullseye/main amd64 Packages
     12.22.12~dfsg-1~deb11u4 500
        500 http://security.debian.org/debian-security bullseye-security/main amd64 Packages
     12.22.12~dfsg-1~deb11u3 500
        500 http://deb.debian.org/debian bullseye/main amd64 Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.3.5
javascript:     6.1.4

Adapters from github:   3

Adapter State
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alias-manager.0          : alias-manager         : iobroker                                 -  enabled
+ system.adapter.backitup.0               : backitup              : iobroker                                 -  enabled
+ system.adapter.discovery.0              : discovery             : iobroker                                 -  enabled
+ system.adapter.email.0                  : email                 : iobroker                                 -  enabled
+ system.adapter.esphome.0                : esphome               : iobroker                                 -  enabled
  system.adapter.flot.0                   : flot                  : iobroker                                 -  enabled
+ system.adapter.history.0                : history               : iobroker                                 -  enabled
+ system.adapter.influxdb.0               : influxdb              : iobroker                                 -  enabled, port: 8086
+ system.adapter.info.0                   : info                  : iobroker                                 -  enabled
+ system.adapter.javascript.0             : javascript            : iobroker                                 -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
  system.adapter.mqtt.1                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.sourceanalytix.0         : sourceanalytix        : iobroker                                 -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : iobroker                                 -  enabled
  system.adapter.vis.0                    : vis                   : iobroker                                 -  enabled
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : iobroker                                 -  enabled, port: /dev/serial/by-id/usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_00b847ef8093eb118e34214f3d98b6d1-if00-port0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.influxdb.0               : influxdb              : iobroker                                 -  enabled, port: 8086
+ system.adapter.mqtt.0                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
  system.adapter.mqtt.1                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : iobroker                                 -  enabled, port: /dev/serial/by-id/usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_00b847ef8093eb118e34214f3d98b6d1-if00-port0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Cannot download repository file from "http://download.iobroker.net/sources-dist.json": timeout of 10000ms exceeded
Adapter    "accuweather"  : 1.2.4    , installed 1.2.4
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "alias-manager": 1.2.4    , installed 1.2.4
Adapter    "backitup"     : 2.6.19   , installed 2.6.19
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "email"        : 1.2.0    , installed 1.1.4  [Updatable]
Adapter    "flot"         : 1.12.0   , installed 1.11.0 [Updatable]
Adapter    "history"      : 2.2.4    , installed 2.2.4
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "info"         : 1.9.26   , installed 1.9.26
Adapter    "javascript"   : 7.0.3    , installed 6.1.4  [Updatable]
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "mqtt"         : 4.1.1    , installed 4.0.7  [Updatable]
Adapter    "shelly"       : 6.4.1    , installed 6.3.1  [Updatable]
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-jqui-mfd" : 1.0.12   , installed 1.0.12
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0
Adapter    "zigbee"       : 1.8.10   , installed 1.8.11

Objects and States
Please stand by - This may take a while
Objects:        1687
States:         1535

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
Hit:3 http://security.debian.org/debian-security bullseye-security InRelease
Hit:4 http://deb.debian.org/debian bullseye-backports InRelease
Hit:5 https://repos.influxdata.com/debian stable InRelease
Hit:6 https://deb.nodesource.com/node_16.x bullseye InRelease
Hit:7 https://deb.nodesource.com/node_18.x bullseye InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       16882      639/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       17439      639/iobroker.js-con
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          901        1/init
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          16773      492/sshd: /usr/sbin
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       17549      900/io.mqtt.0
tcp        0      0 0.0.0.0:6052            0.0.0.0:*               LISTEN      1001       18671      1080/python3
tcp6       0      0 :::111                  :::*                    LISTEN      0          1111       1/init
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       17488      814/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       17137      994/io.web.0
tcp6       0      0 :::8086                 :::*                    LISTEN      998        15932      473/influxd
tcp6       0      0 :::22                   :::*                    LISTEN      0          16775      492/sshd: /usr/sbin
udp        0      0 10.0.1.2:5353           0.0.0.0:*                           1001       16296      1080/python3
udp        0      0 127.0.0.1:5353          0.0.0.0:*                           1001       16295      1080/python3
udp        0      0 192.168.0.209:5353      0.0.0.0:*                           1001       16294      1080/python3
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       17664      1080/python3
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       18650      1024/io.esphome.0
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       17046      911/io.shelly.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          15129      432/dhclient
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          13374      1/init
udp        0      0 0.0.0.0:49402           0.0.0.0:*                           0          15349      -
udp6       0      0 :::111                  :::*                                0          11605      1/init
udp6       0      0 :::49402                :::*                                0          15350      -

*** Log File - Last 25 Lines ***

2023-06-19 15:14:30.583  - info: sourceanalytix.0 (1090) Welcome to SourceAnalytix, making things ready ...
2023-06-19 15:14:30.640  - info: sourceanalytix.0 (1090) Found 2 SourceAnalytix enabled states
2023-06-19 15:14:30.641  - info: sourceanalytix.0 (1090) Initialising (1 of 2) "alias.0.Kuehlschrank.load_power"
2023-06-19 15:14:31.384  - info: info.0 (1046) cpu Temp res = {"main":55,"cores":[53,53,56,56],"max":56,"socket":[48.7],"chipset":null}
2023-06-19 15:14:33.066  - info: sourceanalytix.0 (1090) Initialization of alias.0.Kuehlschrank.load_power successfully
2023-06-19 15:14:33.068  - info: sourceanalytix.0 (1090) Initialising (2 of 2) "alias.0.Spuehlmaschine.load_power"
2023-06-19 15:14:35.103  - info: sourceanalytix.0 (1090) Initialization of alias.0.Spuehlmaschine.load_power successfully
2023-06-19 15:14:35.120  - info: sourceanalytix.0 (1090) Successfully activated SourceAnalytix for 2 of 2 states, will do my Job until you stop me!
2023-06-19 15:27:21.317  - info: mqtt.0 (900) Client [Wohnz_0] connection closed: timeout
2023-06-19 15:27:24.683  - info: mqtt.0 (900) Client [Wohnz_0] connected with secret 1687181244677_910
2023-06-19 15:27:24.704  - info: mqtt.0 (900) Client [Wohnz_0] subscribes on "Wohnz/#" with regex /^Wohnz(\..*)?/
2023-06-19 15:27:24.708  - info: mqtt.0 (900) Client [Wohnz_0] subscribes on "Wohnz/#"  with regex /^mqtt\.0\.Wohnz(\..*)?/
2023-06-19 15:27:24.912  - info: mqtt.0 (900) Client [Wohnz_0] publishOnSubscribe send all known states
2023-06-19 15:30:00.592  - warn: javascript.0 (871) getState "accuweather.0.Current.Temperature" not found (3)
2023-06-19 15:30:00.598  - warn: javascript.0 (871)     at calc (script.js.Lüften.Lüften:1403:22)
2023-06-19 15:30:00.599  - warn: javascript.0 (871)     at Object.<anonymous> (script.js.Lüften.Lüften:1993:8)
2023-06-19 15:30:00.599  - warn: javascript.0 (871)     at Timeout._onTimeout (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:2575:34)
2023-06-19 15:30:00.600  - warn: javascript.0 (871)     at listOnTimeout (node:internal/timers:569:17)
2023-06-19 15:30:00.600  - warn: javascript.0 (871)     at processTimers (node:internal/timers:512:7)
2023-06-19 15:30:00.601  - warn: javascript.0 (871) getState "accuweather.0.Current.RelativeHumidity" not found (3)
2023-06-19 15:30:00.604  - warn: javascript.0 (871)     at calc (script.js.Lüften.Lüften:1405:22)
2023-06-19 15:30:00.604  - warn: javascript.0 (871)     at Object.<anonymous> (script.js.Lüften.Lüften:1993:8)
2023-06-19 15:30:00.605  - warn: javascript.0 (871)     at Timeout._onTimeout (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:2575:34)
2023-06-19 15:30:00.605  - warn: javascript.0 (871)     at listOnTimeout (node:internal/timers:569:17)
2023-06-19 15:30:00.606  - warn: javascript.0 (871)     at processTimers (node:internal/timers:512:7)

[Homoran]

@dieter_p sagte in Linux PowerCut vermeiden; Fehlermeldung BT3 Pro?:

: re-mounted. Opts: errors=remount-ro

oops

[Thomas Braun]

@dieter_p

Boot Target: graphical.target

Würde ich auf multiuser.target umstellen.

Users in groups 'adm', 'systemd-journal' can see all messages.

Deinen user 'pi' würde ich in die Gruppe 'adm' packen.

du: cannot read directory '/opt/iobroker/iobroker-data/esphome.0/.esphome/build/esphome-web-9fb8e8/.piolibdeps/esphome-web-9fb8e8/noise-c': Permission denied

Da stimmt was mit den Rechten nicht, unterhalb von /opt/iobroker müsstest du alles lesen können. iob fix laufen lassen.

Halt die iob-Adapter aktuell.

[Thomas Braun]

@homoran

Die Meldung ist harmlos und deutet nicht auf Fehler hin.
Ist nur die Voreinstellung, was passieren soll, wenn denn Fehler im Dateisystem auftauchen. Nämlich: Wenn errors, dann 'nur lesend' einhängen, damit nicht noch mehr kaputt geht.
Ist hier aber nicht der Fall, dank dem 'Affengriff'.

[Dieter_P]

@thomas-braun

Hoffe ich hab nix vergessen:

Skript v.2023-04-16

*** BASE SYSTEM ***
Architecture    : x86_64
Docker          : false
Virtualization  : none
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 16:02:12 up 0 min,  1 user,  load average: 1.18, 0.34, 0.12
CPU threads: 4


*** Time and Time Zones ***
               Local time: Mon 2023-06-19 16:02:12 CEST
           Universal time: Mon 2023-06-19 14:02:12 UTC
                 RTC time: Mon 2023-06-19 14:02:12
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm cdrom floppy sudo audio dip video plugdev netdev bluetooth iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.9G        941M        2.6G        1.0M        363M        2.7G
Swap:           976M          0B        976M
Total:          4.8G        941M        3.5G

         3860 M total memory
          941 M used memory
          119 M active memory
         1052 M inactive memory
         2555 M free memory
           28 M buffer memory
          335 M swap cache
          976 M total swap
            0 M used swap
          976 M free swap

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.9G     0  1.9G   0% /dev
tmpfs          tmpfs     387M  1.2M  385M   1% /run
/dev/mmcblk1p2 ext4       55G   24G   29G  45% /
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     5.0M     0  5.0M   0% /run/lock
/dev/mmcblk1p1 vfat      511M  5.8M  506M   2% /boot/efi
tmpfs          tmpfs     387M     0  387M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Mon Jun 19 16:01:28 2023] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[Mon Jun 19 16:01:30 2023] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro

Show mounted filesystems (real ones only):
TARGET      SOURCE         FSTYPE OPTIONS
/           /dev/mmcblk1p2 ext4   rw,relatime,errors=remount-ro
`-/boot/efi /dev/mmcblk1p1 vfat   rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro

Files in neuralgic directories:

/var:
6.4G    /var/
5.5G    /var/lib
5.3G    /var/lib/influxdb/engine/data/4f92bd04e9fbefda/autogen
5.3G    /var/lib/influxdb/engine/data/4f92bd04e9fbefda
5.3G    /var/lib/influxdb/engine/data

Archived and active journals take up 432.0M in the file system.

/opt/iobroker/backups:
12G     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
833M    /opt/iobroker/iobroker-data/
612M    /opt/iobroker/iobroker-data/esphome.0/.esphome
612M    /opt/iobroker/iobroker-data/esphome.0
611M    /opt/iobroker/iobroker-data/esphome.0/.esphome/build
171M    /opt/iobroker/iobroker-data/esphome.0/.esphome/build/ddorf

The five largest files in iobroker-data are:
30M     /opt/iobroker/iobroker-data/esphome.0/.esphome/build/esp32-flur/.pioenvs/esp32-flur/firmware.elf
29M     /opt/iobroker/iobroker-data/esphome.0/.esphome/build/esphome-web-9fb8e8/.pioenvs/esphome-web-9fb8e8/firmware.elf
24M     /opt/iobroker/iobroker-data/esphome.0/.esphome/build/ddorf/.pioenvs/ddorf/libFrameworkArduino.a
24M     /opt/iobroker/iobroker-data/esphome.0/.esphome/build/dddorf-wroom32/.pioenvs/dddorf-wroom32/libFrameworkArduino.a
22M     /opt/iobroker/iobroker-data/esphome.0/.esphome/build/ddorf/.pioenvs/ddorf/firmware.elf

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.16.0
/usr/bin/node           v18.16.0
/usr/bin/npm            9.5.1
/usr/bin/npx            9.5.1


nodejs:
  Installed: 18.16.0-deb-1nodesource1
  Candidate: 18.16.0-deb-1nodesource1
  Version table:
 *** 18.16.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main amd64 Packages
        100 /var/lib/dpkg/status
     16.20.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_16.x bullseye/main amd64 Packages
     12.22.12~dfsg-1~deb11u4 500
        500 http://security.debian.org/debian-security bullseye-security/main amd64 Packages
     12.22.12~dfsg-1~deb11u3 500
        500 http://deb.debian.org/debian bullseye/main amd64 Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.3.5
javascript:     7.0.3

Adapters from github:   3

Adapter State
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alias-manager.0          : alias-manager         : iobroker                                 -  enabled
+ system.adapter.backitup.0               : backitup              : iobroker                                 -  enabled
+ system.adapter.discovery.0              : discovery             : iobroker                                 -  enabled
+ system.adapter.email.0                  : email                 : iobroker                                 -  enabled
+ system.adapter.esphome.0                : esphome               : iobroker                                 -  enabled
  system.adapter.flot.0                   : flot                  : iobroker                                 -  enabled
+ system.adapter.history.0                : history               : iobroker                                 -  enabled
+ system.adapter.influxdb.0               : influxdb              : iobroker                                 -  enabled, port: 8086
+ system.adapter.info.0                   : info                  : iobroker                                 -  enabled
+ system.adapter.javascript.0             : javascript            : iobroker                                 -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
  system.adapter.mqtt.1                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.sourceanalytix.0         : sourceanalytix        : iobroker                                 -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : iobroker                                 -  enabled
  system.adapter.vis.0                    : vis                   : iobroker                                 -  enabled
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : iobroker                                 -  enabled, port: /dev/serial/by-id/usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_00b847ef8093eb118e34214f3d98b6d1-if00-port0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.influxdb.0               : influxdb              : iobroker                                 -  enabled, port: 8086
+ system.adapter.mqtt.0                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
  system.adapter.mqtt.1                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : iobroker                                 -  enabled, port: /dev/serial/by-id/usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_00b847ef8093eb118e34214f3d98b6d1-if00-port0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "accuweather"  : 1.2.4    , installed 1.2.4
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "alias-manager": 1.2.4    , installed 1.2.4
Adapter    "backitup"     : 2.6.23   , installed 2.6.23
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "email"        : 1.2.0    , installed 1.2.0
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "history"      : 2.2.4    , installed 2.2.4
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "info"         : 1.9.26   , installed 1.9.26
Adapter    "javascript"   : 7.0.3    , installed 7.0.3
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "mqtt"         : 4.1.1    , installed 4.1.1
Adapter    "shelly"       : 6.4.1    , installed 6.4.1
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-jqui-mfd" : 1.0.12   , installed 1.0.12
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0
Adapter    "zigbee"       : 1.8.10   , installed 1.8.11

Objects and States
Please stand by - This may take a while
Objects:        1688
States:         1543

*** OS-Repositories and Updates ***
Hit:1 https://deb.nodesource.com/node_16.x bullseye InRelease
Hit:2 https://deb.nodesource.com/node_18.x bullseye InRelease
Hit:3 http://security.debian.org/debian-security bullseye-security InRelease
Hit:4 http://deb.debian.org/debian bullseye InRelease
Hit:5 http://deb.debian.org/debian bullseye-updates InRelease
Hit:6 http://deb.debian.org/debian bullseye-backports InRelease
Hit:7 https://repos.influxdata.com/debian stable InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          10509      1/init
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          13779      525/sshd: /usr/sbin
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       17601      961/io.mqtt.0
tcp        0      0 0.0.0.0:6052            0.0.0.0:*               LISTEN      1001       17904      1312/python3
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       13863      674/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       13858      674/iobroker.js-con
tcp6       0      0 :::111                  :::*                    LISTEN      0          1128       1/init
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       13907      849/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       17839      1188/io.web.0
tcp6       0      0 :::8086                 :::*                    LISTEN      998        17357      510/influxd
tcp6       0      0 :::22                   :::*                    LISTEN      0          13781      525/sshd: /usr/sbin
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       17637      981/io.shelly.0
udp        0      0 0.0.0.0:55023           0.0.0.0:*                           0          16083      -
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          1726       462/dhclient
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          14338      1/init
udp        0      0 127.0.0.1:5353          0.0.0.0:*                           1001       20629      1312/python3
udp        0      0 192.168.0.209:5353      0.0.0.0:*                           1001       20628      1312/python3
udp        0      0 10.0.1.2:5353           0.0.0.0:*                           1001       20627      1312/python3
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       20620      1312/python3
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       18828      1238/io.esphome.0
udp6       0      0 :::55023                :::*                                0          16084      -
udp6       0      0 :::111                  :::*                                0          13325      1/init

*** Log File - Last 25 Lines ***

2023-06-19 16:02:35.783  - info: host.iobroker instance system.adapter.vis.0 terminated while should be started once
2023-06-19 16:02:38.329  - info: esphome.0 (1238) starting. Version 0.2.4 (non-npm: DrozmotiX/ioBroker.esphome#86201d5e87abede6071e84b38299bb72f699fef0) in /opt/iobroker/node_modules/iobroker.esphome, node: v18.16.0, js-controller: 4.0.24
2023-06-19 16:02:38.433  - info: esphome.0 (1238) Auto Discovery startet, new devices (or IP changes) will be detected automatically
2023-06-19 16:02:38.439  - info: esphome.0 (1238) Native Integration of ESPHome Dashboard enabled
2023-06-19 16:02:39.071  - info: host.iobroker instance system.adapter.info.0 started with pid 1269
2023-06-19 16:02:42.042  - info: esphome.0 (1238) [ESPHome - Console] 2023-06-19 16:02:42,040 INFO Starting dashboard web server on http://0.0.0.0:6052 and configuration dir /opt/iobroker/iobroker-data/esphome.0...

2023-06-19 16:02:42.064  - error: esphome.0 (1238) [dashboardProcess ERROR] 2023-06-19 16:02:42,060 WARNING Error with socket 8 (('10.0.1.2', 5353))): [Errno 126] Required key not available
Traceback (most recent call last):
  File "/usr/lib/python3.9/asyncio/selector_events.py", line 1056, in sendto
    self._sock.sendto(data, addr)
OSError: [Errno 126] Required key not available

2023-06-19 16:02:43.078  - info: host.iobroker instance system.adapter.sourceanalytix.0 started with pid 1334
2023-06-19 16:02:46.095  - info: info.0 (1269) starting. Version 1.9.26 in /opt/iobroker/node_modules/iobroker.info, node: v18.16.0, js-controller: 4.0.24
2023-06-19 16:02:46.492  - info: info.0 (1269) Reading/updating systemdata.
2023-06-19 16:02:47.091  - info: sourceanalytix.0 (1334) starting. Version 0.4.12-2 (non-npm: iobroker-community-adapters/ioBroker.sourceanalytix#c9b9e18e1694e45ce88e21e868e38e565aad6910) in /opt/iobroker/node_modules/iobroker.sourceanalytix, node: v18.16.0, js-controller: 4.0.24
2023-06-19 16:02:47.146  - info: sourceanalytix.0 (1334) Welcome to SourceAnalytix, making things ready ...
2023-06-19 16:02:47.219  - info: sourceanalytix.0 (1334) Found 2 SourceAnalytix enabled states
2023-06-19 16:02:47.221  - info: sourceanalytix.0 (1334) Initialising (1 of 2) "alias.0.Kuehlschrank.load_power"
2023-06-19 16:02:48.498  - info: info.0 (1269) cpu Temp res = {"main":55,"cores":[53,53,56,56],"max":56,"socket":[48.7],"chipset":null}
2023-06-19 16:02:50.149  - info: sourceanalytix.0 (1334) Initialization of alias.0.Kuehlschrank.load_power successfully
2023-06-19 16:02:50.150  - info: sourceanalytix.0 (1334) Initialising (2 of 2) "alias.0.Spuehlmaschine.load_power"
2023-06-19 16:02:52.580  - info: sourceanalytix.0 (1334) Initialization of alias.0.Spuehlmaschine.load_power successfully
2023-06-19 16:02:52.597  - info: sourceanalytix.0 (1334) Successfully activated SourceAnalytix for 2 of 2 states, will do my Job until you stop me!

[Thomas Braun]

@dieter_p

Da schaut gleich ganz anders aus.