@UncleSam

nach der korrekten Multihost installation steht jetzt bei mir auch:

At least one iobroker host is running.

Nochmal Vielen Dank! Hat mir viel Arbeit erspart!

Gruß Stefan

@UncleSam
Er läut wieder!!! Super! Vielen Dank für die schnelle Hilfe!

Ich mach mal schnell eine Backup!

Aber warum das ganze, darf ich kein Update des Linux Systems machen? Und was war jetzt das Hauptproblem?

iobroker status spuckt mir das hier aus:

iobroker is running on this host.

No iobroker host is running.

Objects type: file
States type: redis
Cannot load "custom": Error: Connection is closed.

Ist das in Ordnung?

Gruß Stefan

Sorry, habs jetzt verstanden.

Hab beide Hosts geändert, aber ohne Erfolg. IoBroker startet immer noch nicht

leider komme ich auch nicht mit dem Befehl iobroker setup custom weiter, da kommt diesselbe Fehlermeldung wie beim starten des js-controllers. Meintest du das ich da die beiden Host ändern sollte?

in der Redis.conf habe ich jetz auf 0.0.0.0 umgestellt, aber ohne Erfolg.

Danke für deine Hilfe!

Ja das ist die Adresse des Tinker. Master Slave hab ich, wobei das Slave System aktuell nicht erreichbar ist(hab mich aber noch nicht drum gekümmert, weil auf dem Slave noch nicht viel läuft)
Muß ich die Adresse in der redis.conf ändern?

hier die Konfiguration:

{
  "system": {
    "memoryLimitMB": 0,
    "hostname": ""
  },
  "multihostService": {
    "enabled": true,
    "secure": true,
    "password": ""
  },
  "network": {
    "IPv4": true,
    "IPv6": true,
    "bindAddress": null,
    "useSystemNpm": true
  },
  "objects": {
    "type": "file",
    "typeComment": "Possible values: 'file' - [port 9001], redis - [port 6379], couch - [port 5984].",
    "host": "0.0.0.0",
    "port": 9001,
    "user": "",
    "pass": "",
    "noFileCache": false,
    "connectTimeout": 2000,
    "options": {
      "auth_pass": null,
      "retry_max_delay": 5000
    }
  },
  "states": {
    "type": "redis",
    "typeComment": "Possible values: 'file' - [port 9000], 'redis' - [port 6379].",
    "host": "192.168.178.32",
    "port": 6379,
    "maxQueue": 1000,
    "options": {
      "auth_pass": null,
      "retry_max_delay": 5000
    }
  },
  "log": {
    "level": "info",
    "maxDays": 7,
    "noStdout": true,
    "transport": {
      "file1": {
        "type": "file",
        "enabled": true,
        "filename": "log/iobroker",
        "fileext": ".log",
        "maxsize": null,
        "maxFiles": null
      },
      "syslog1": {
        "type": "syslog",
        "enabled": false,
        "host": "localhost",
        "host_comment": "The host running syslogd, defaults to localhost.",
        "port_comment": "The port on the host that syslog is running on, defaults to syslogd's default port(514/UDP).",
        "protocol": "udp4",
        "protocol_comment": "The network protocol to log over (e.g. tcp4, udp4, unix, unix-connect, etc).",
        "path_comment": "The path to the syslog dgram socket (i.e. /dev/log or /var/run/syslog for OS X).",
        "facility_comment": "Syslog facility to use (Default: local0).",
        "localhost": "iobroker",
        "localhost_comment": "Host to indicate that log messages are coming from (Default: localhost).",
        "sysLogType_comment": "The type of the syslog protocol to use (Default: BSD).",
        "app_name_comment": "The name of the application (Default: process.title).",
        "eol_comment": "The end of line character to be added to the end of the message (Default: Message without modifications)."
      }
    }
  },
  "dataDirComment": "Always relative to iobroker.js-controller/",
  "dataDir": "../../iobroker-data/"

@UncleSam

Danke!

Nein der js-controller startet immer noch nicht. Selbe Fehlermeldung.
Bei dem Befehl npm i kommt:

npm WARN deprecated coffee-script@1.12.7: CoffeeScript on NPM has moved to "coffeescript" (no hyphen)
npm WARN deprecated request@2.88.0: request has been deprecated, see https://github.com/request/request/issues/3142
npm WARN deprecated request-promise@4.2.6: request-promise has been deprecated because it extends the now deprecated request package, see https://github.com/request/request/issues/3142

> iobroker.js-controller@3.1.6 preinstall /opt/iobroker/node_modules/iobroker.js-controller
> node lib/preinstallCheck.js

NPM version: 6.14.8

> epoll@2.0.10 install /opt/iobroker/node_modules/epoll
> node-gyp rebuild

make: Entering directory '/opt/iobroker/node_modules/epoll/build'
  CXX(target) Release/obj.target/epoll/src/epoll.o
  SOLINK_MODULE(target) Release/obj.target/epoll.node
  COPY Release/epoll.node
make: Leaving directory '/opt/iobroker/node_modules/epoll/build'

> diskusage@1.1.3 install /opt/iobroker/node_modules/diskusage
> node-gyp rebuild

make: Entering directory '/opt/iobroker/node_modules/diskusage/build'
  CXX(target) Release/obj.target/diskusage/src/main.o
In file included from ../src/main.cpp:3:
../../nan/nan.h: In function 'void Nan::AsyncQueueWorker(Nan::AsyncWorker*)':
../../nan/nan.h:2294:62: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
In file included from ../../nan/nan.h:56,
                 from ../src/main.cpp:3:
../src/main.cpp: At global scope:
/home/iobroker/.cache/node-gyp/12.18.3/include/node/node.h:608:43: warning: cast between incompatible function types from 'void (*)(v8::Local<v8::Object>)' to 'node::addon_register_func' {aka 'void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)'} [-Wcast-function-type]
       (node::addon_register_func) (regfunc),                          \
                                           ^
/home/iobroker/.cache/node-gyp/12.18.3/include/node/node.h:642:3: note: in expansion of macro 'NODE_MODULE_X'
   NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
   ^~~~~~~~~~~~~
../src/main.cpp:42:1: note: in expansion of macro 'NODE_MODULE'
 NODE_MODULE(diskusage, Init)
 ^~~~~~~~~~~
  CXX(target) Release/obj.target/diskusage/src/diskusage_posix.o
  SOLINK_MODULE(target) Release/obj.target/diskusage.node
  COPY Release/diskusage.node
make: Leaving directory '/opt/iobroker/node_modules/diskusage/build'

> unix-dgram@2.0.3 install /opt/iobroker/node_modules/unix-dgram
> node-gyp rebuild

make: Entering directory '/opt/iobroker/node_modules/unix-dgram/build'
  CXX(target) Release/obj.target/unix_dgram/src/unix_dgram.o
In file included from ../src/unix_dgram.cc:5:
../../nan/nan.h: In function 'void Nan::AsyncQueueWorker(Nan::AsyncWorker*)':
../../nan/nan.h:2294:62: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
In file included from ../../nan/nan.h:56,
                 from ../src/unix_dgram.cc:5:
../src/unix_dgram.cc: At global scope:
/home/iobroker/.cache/node-gyp/12.18.3/include/node/node.h:608:43: warning: cast between incompatible function types from 'void (*)(v8::Local<v8::Object>)' to 'node::addon_register_func' {aka 'void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)'} [-Wcast-function-type]
       (node::addon_register_func) (regfunc),                          \
                                           ^
/home/iobroker/.cache/node-gyp/12.18.3/include/node/node.h:642:3: note: in expansion of macro 'NODE_MODULE_X'
   NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
   ^~~~~~~~~~~~~
../src/unix_dgram.cc:404:1: note: in expansion of macro 'NODE_MODULE'
 NODE_MODULE(unix_dgram, Initialize)
 ^~~~~~~~~~~
  SOLINK_MODULE(target) Release/obj.target/unix_dgram.node
  COPY Release/unix_dgram.node
make: Leaving directory '/opt/iobroker/node_modules/unix-dgram/build'

> ursa-optional@0.9.10 install /opt/iobroker/node_modules/ursa-optional
> node rebuild.js

ursaNative bindings compilation fail. This is not an issue. Modules that depend on it will use fallbacks.

> iobroker@2.0.3 install /opt/iobroker/node_modules/iobroker
> node lib/checkVersions.js

NPM version: 6.14.8

> iobroker.js-controller@3.1.6 install /opt/iobroker/node_modules/iobroker.js-controller
> node iobroker.js setup first

No connection to states 192.168.178.32:6379[redis]
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@^1.0.7 (node_modules/iobroker.info/node_modules/osx-temperature-sensor):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.7: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@~2.1.2 (node_modules/chokidar/node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.1.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})

npm ERR! code ELIFECYCLE
npm ERR! errno 22
npm ERR! iobroker.js-controller@3.1.6 install: `node iobroker.js setup first`
npm ERR! Exit status 22
npm ERR!
npm ERR! Failed at the iobroker.js-controller@3.1.6 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2020-08-18T12_33_58_599Z-debug.log

mikeal created this issue in request/request

open Request’s Past, Present and Future #3142

mikeal created this issue in request/request

open Request’s Past, Present and Future #3142

@UncleSam sagte in ioBroker startet nicht mehr:

npm rebuild

Hallo, danke für die schnelle Antwort.

Habs grad probiert, dann kommt das hier(da kann ich aber nicht viel mit anfangen):

> @serialport/bindings@8.0.8 install /opt/iobroker/node_modules/@serialport/bindings
> prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild

prebuild-install WARN install No prebuilt binaries found (target=12.18.3 runtime=node arch=arm libc= platform=linux)
make: Entering directory '/opt/iobroker/node_modules/@serialport/bindings/build'
  CXX(target) Release/obj.target/bindings/src/serialport.o
In file included from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
../../../nan/nan.h: In function 'void Nan::AsyncQueueWorker(Nan::AsyncWorker*)':
../../../nan/nan.h:2294:62: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
../src/serialport.cpp: In function 'Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)':
../src/serialport.cpp:78:69: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen);
                                                                     ^~~~~~~~~~~~~
../src/serialport.cpp: In function 'Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)':
../src/serialport.cpp:135:71: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate);
                                                                       ^~~~~~~~~~~~~~~
../src/serialport.cpp: In function 'Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)':
../src/serialport.cpp:175:70: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function 'Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)':
../src/serialport.cpp:215:70: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function 'Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)':
../src/serialport.cpp:270:68: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet);
                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function 'Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)':
../src/serialport.cpp:314:68: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet);
                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function 'Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)':
../src/serialport.cpp:363:76: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate);
                                                                            ^~~~~~~~~~~~~~~~~~~~
../src/serialport.cpp: In function 'Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)':
../src/serialport.cpp:409:70: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: At global scope:
../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of 'ToParityEnum' [-Wparentheses]
 SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) {
                            ^
../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of 'ToStopBitEnum' [-Wparentheses]
 SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) {
                              ^
In file included from ../../../nan/nan.h:56,
                 from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
/home/iobroker/.cache/node-gyp/12.18.3/include/node/node.h:608:43: warning: cast between incompatible function types from 'void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)' {aka 'void (*)(v8::Local<v8::Object>)'} to 'node::addon_register_func' {aka 'void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)'} [-Wcast-function-type]
       (node::addon_register_func) (regfunc),                          \
                                           ^
/home/iobroker/.cache/node-gyp/12.18.3/include/node/node.h:642:3: note: in expansion of macro 'NODE_MODULE_X'
   NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
   ^~~~~~~~~~~~~
../src/serialport.cpp:483:1: note: in expansion of macro 'NODE_MODULE'
 NODE_MODULE(serialport, init);
 ^~~~~~~~~~~
  CXX(target) Release/obj.target/bindings/src/serialport_unix.o
In file included from ../src/serialport.h:6,
                 from ../src/serialport_unix.cpp:2:
../../../nan/nan.h: In function 'void Nan::AsyncQueueWorker(Nan::AsyncWorker*)':
../../../nan/nan.h:2294:62: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
../src/serialport_unix.cpp: In function 'int setup(int, OpenBaton*)':
../src/serialport_unix.cpp:176:60: warning: '%s' directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=]
     snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path);
                                                            ^~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp:176:13: note: 'snprintf' output 20 or more bytes (assuming 1043) into a destination of size 1024
     snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path);
     ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp: In function 'void EIO_Open(uv_work_t*)':
../src/serialport_unix.cpp:86:60: warning: '%s' directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=]
     snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path);
                                                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp:86:13: note: 'snprintf' output 22 or more bytes (assuming 1045) into a destination of size 1024
     snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path);
     ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  CXX(target) Release/obj.target/bindings/src/poller.o
In file included from ../src/poller.cpp:1:
../../../nan/nan.h: In function 'void Nan::AsyncQueueWorker(Nan::AsyncWorker*)':
../../../nan/nan.h:2294:62: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
  CXX(target) Release/obj.target/bindings/src/serialport_linux.o
  SOLINK_MODULE(target) Release/obj.target/bindings.node
  COPY Release/bindings.node
make: Leaving directory '/opt/iobroker/node_modules/@serialport/bindings/build'

> serialport@8.0.8 postinstall /opt/iobroker/node_modules/serialport
> node thank-you.js

Thank you for using serialport!
If you rely on this package, please consider supporting our open collective:
> https://opencollective.com/serialport/donate


iobroker.admin@4.1.6 /opt/iobroker/node_modules/iobroker.admin
@iobroker/adapter-core@2.4.0 /opt/iobroker/node_modules/@iobroker/adapter-core
@types/iobroker@3.0.11 /opt/iobroker/node_modules/@types/iobroker
@types/node@14.6.0 /opt/iobroker/node_modules/@types/node
body-parser@1.19.0 /opt/iobroker/node_modules/body-parser
bytes@3.1.0 /opt/iobroker/node_modules/bytes
content-type@1.0.4 /opt/iobroker/node_modules/content-type
debug@2.6.9 /opt/iobroker/node_modules/debug
ms@2.0.0 /opt/iobroker/node_modules/ms
depd@1.1.2 /opt/iobroker/node_modules/depd
http-errors@1.7.2 /opt/iobroker/node_modules/http-errors
inherits@2.0.3 /opt/iobroker/node_modules/inherits
setprototypeof@1.1.1 /opt/iobroker/node_modules/setprototypeof
statuses@1.5.0 /opt/iobroker/node_modules/statuses
toidentifier@1.0.0 /opt/iobroker/node_modules/toidentifier
iconv-lite@0.4.24 /opt/iobroker/node_modules/iconv-lite
safer-buffer@2.1.2 /opt/iobroker/node_modules/safer-buffer
on-finished@2.3.0 /opt/iobroker/node_modules/on-finished
ee-first@1.1.1 /opt/iobroker/node_modules/ee-first
qs@6.7.0 /opt/iobroker/node_modules/qs
raw-body@2.4.0 /opt/iobroker/node_modules/raw-body
unpipe@1.0.0 /opt/iobroker/node_modules/unpipe
type-is@1.6.18 /opt/iobroker/node_modules/type-is
media-typer@0.3.0 /opt/iobroker/node_modules/media-typer
mime-types@2.1.27 /opt/iobroker/node_modules/mime-types
mime-db@1.44.0 /opt/iobroker/node_modules/mime-db
connect-flash@0.1.1 /opt/iobroker/node_modules/connect-flash
cookie-parser@1.4.5 /opt/iobroker/node_modules/cookie-parser
cookie@0.4.0 /opt/iobroker/node_modules/cookie
cookie-signature@1.0.6 /opt/iobroker/node_modules/cookie-signature
express@4.17.1 /opt/iobroker/node_modules/express
accepts@1.3.7 /opt/iobroker/node_modules/accepts
negotiator@0.6.2 /opt/iobroker/node_modules/negotiator
array-flatten@1.1.1 /opt/iobroker/node_modules/array-flatten
content-disposition@0.5.3 /opt/iobroker/node_modules/content-disposition
safe-buffer@5.1.2 /opt/iobroker/node_modules/safe-buffer
encodeurl@1.0.2 /opt/iobroker/node_modules/encodeurl
escape-html@1.0.3 /opt/iobroker/node_modules/escape-html
etag@1.8.1 /opt/iobroker/node_modules/etag
finalhandler@1.1.2 /opt/iobroker/node_modules/finalhandler
parseurl@1.3.3 /opt/iobroker/node_modules/parseurl
fresh@0.5.2 /opt/iobroker/node_modules/fresh
merge-descriptors@1.0.1 /opt/iobroker/node_modules/merge-descriptors
methods@1.1.2 /opt/iobroker/node_modules/methods
path-to-regexp@0.1.7 /opt/iobroker/node_modules/path-to-regexp
proxy-addr@2.0.6 /opt/iobroker/node_modules/proxy-addr
forwarded@0.1.2 /opt/iobroker/node_modules/forwarded
ipaddr.js@1.9.1 /opt/iobroker/node_modules/ipaddr.js
range-parser@1.2.1 /opt/iobroker/node_modules/range-parser
send@0.17.1 /opt/iobroker/node_modules/send
destroy@1.0.4 /opt/iobroker/node_modules/destroy
mime@1.6.0 /opt/iobroker/node_modules/mime
ms@2.1.1 /opt/iobroker/node_modules/send/node_modules/ms
serve-static@1.14.1 /opt/iobroker/node_modules/serve-static
utils-merge@1.0.1 /opt/iobroker/node_modules/utils-merge
vary@1.1.2 /opt/iobroker/node_modules/vary
express-fileupload@1.2.0 /opt/iobroker/node_modules/express-fileupload
busboy@0.3.1 /opt/iobroker/node_modules/busboy
dicer@0.3.0 /opt/iobroker/node_modules/dicer
streamsearch@0.1.2 /opt/iobroker/node_modules/streamsearch
express-session@1.17.1 /opt/iobroker/node_modules/express-session
depd@2.0.0 /opt/iobroker/node_modules/express-session/node_modules/depd
on-headers@1.0.2 /opt/iobroker/node_modules/on-headers
safe-buffer@5.2.0 /opt/iobroker/node_modules/express-session/node_modules/safe-buffer
uid-safe@2.1.5 /opt/iobroker/node_modules/uid-safe
random-bytes@1.0.0 /opt/iobroker/node_modules/random-bytes
passport@0.4.1 /opt/iobroker/node_modules/passport
passport-strategy@1.0.0 /opt/iobroker/node_modules/passport-strategy
pause@0.0.1 /opt/iobroker/node_modules/pause
passport-local@1.0.0 /opt/iobroker/node_modules/passport-local
passport.socketio@3.7.0 /opt/iobroker/node_modules/passport.socketio
xtend@4.0.2 /opt/iobroker/node_modules/xtend
request@2.88.2 /opt/iobroker/node_modules/request
aws-sign2@0.7.0 /opt/iobroker/node_modules/aws-sign2
aws4@1.10.1 /opt/iobroker/node_modules/aws4
caseless@0.12.0 /opt/iobroker/node_modules/caseless
combined-stream@1.0.8 /opt/iobroker/node_modules/combined-stream
delayed-stream@1.0.0 /opt/iobroker/node_modules/delayed-stream
extend@3.0.2 /opt/iobroker/node_modules/extend
forever-agent@0.6.1 /opt/iobroker/node_modules/forever-agent
form-data@2.3.3 /opt/iobroker/node_modules/form-data
asynckit@0.4.0 /opt/iobroker/node_modules/asynckit
har-validator@5.1.5 /opt/iobroker/node_modules/har-validator
ajv@6.12.4 /opt/iobroker/node_modules/ajv
fast-deep-equal@3.1.3 /opt/iobroker/node_modules/fast-deep-equal
fast-json-stable-stringify@2.1.0 /opt/iobroker/node_modules/fast-json-stable-stringify
json-schema-traverse@0.4.1 /opt/iobroker/node_modules/json-schema-traverse
uri-js@4.2.2 /opt/iobroker/node_modules/uri-js
punycode@2.1.1 /opt/iobroker/node_modules/punycode
har-schema@2.0.0 /opt/iobroker/node_modules/har-schema
http-signature@1.2.0 /opt/iobroker/node_modules/http-signature
assert-plus@1.0.0 /opt/iobroker/node_modules/assert-plus
jsprim@1.4.1 /opt/iobroker/node_modules/jsprim
extsprintf@1.3.0 /opt/iobroker/node_modules/extsprintf
json-schema@0.2.3 /opt/iobroker/node_modules/json-schema
verror@1.10.0 /opt/iobroker/node_modules/verror
core-util-is@1.0.2 /opt/iobroker/node_modules/core-util-is
sshpk@1.16.1 /opt/iobroker/node_modules/sshpk
asn1@0.2.4 /opt/iobroker/node_modules/asn1
bcrypt-pbkdf@1.0.2 /opt/iobroker/node_modules/bcrypt-pbkdf
tweetnacl@0.14.5 /opt/iobroker/node_modules/tweetnacl
dashdash@1.14.1 /opt/iobroker/node_modules/dashdash
ecc-jsbn@0.1.2 /opt/iobroker/node_modules/ecc-jsbn
jsbn@0.1.1 /opt/iobroker/node_modules/jsbn
getpass@0.1.7 /opt/iobroker/node_modules/getpass
is-typedarray@1.0.0 /opt/iobroker/node_modules/is-typedarray
isstream@0.1.2 /opt/iobroker/node_modules/isstream
json-stringify-safe@5.0.1 /opt/iobroker/node_modules/json-stringify-safe
oauth-sign@0.9.0 /opt/iobroker/node_modules/oauth-sign
performance-now@2.1.0 /opt/iobroker/node_modules/performance-now
qs@6.5.2 /opt/iobroker/node_modules/request/node_modules/qs
tough-cookie@2.5.0 /opt/iobroker/node_modules/tough-cookie
psl@1.8.0 /opt/iobroker/node_modules/psl
tunnel-agent@0.6.0 /opt/iobroker/node_modules/tunnel-agent
uuid@3.4.0 /opt/iobroker/node_modules/uuid
semver@7.3.2 /opt/iobroker/node_modules/iobroker.admin/node_modules/semver
socket.io@2.3.0 /opt/iobroker/node_modules/socket.io
debug@4.1.1 /opt/iobroker/node_modules/socket.io/node_modules/debug
ms@2.1.2 /opt/iobroker/node_modules/socket.io/node_modules/ms
engine.io@3.4.2 /opt/iobroker/node_modules/engine.io
base64id@2.0.0 /opt/iobroker/node_modules/base64id
cookie@0.3.1 /opt/iobroker/node_modules/engine.io/node_modules/cookie
debug@4.1.1 /opt/iobroker/node_modules/engine.io/node_modules/debug
ms@2.1.2 /opt/iobroker/node_modules/engine.io/node_modules/ms
engine.io-parser@2.2.0 /opt/iobroker/node_modules/engine.io-parser
after@0.8.2 /opt/iobroker/node_modules/after
arraybuffer.slice@0.0.7 /opt/iobroker/node_modules/arraybuffer.slice
base64-arraybuffer@0.1.5 /opt/iobroker/node_modules/base64-arraybuffer
blob@0.0.5 /opt/iobroker/node_modules/blob
has-binary2@1.0.3 /opt/iobroker/node_modules/has-binary2
isarray@2.0.1 /opt/iobroker/node_modules/isarray
ws@7.3.1 /opt/iobroker/node_modules/ws
socket.io-adapter@1.1.2 /opt/iobroker/node_modules/socket.io-adapter
socket.io-client@2.3.0 /opt/iobroker/node_modules/socket.io-client
backo2@1.0.2 /opt/iobroker/node_modules/backo2
component-bind@1.0.0 /opt/iobroker/node_modules/component-bind
component-emitter@1.2.1 /opt/iobroker/node_modules/component-emitter
debug@4.1.1 /opt/iobroker/node_modules/socket.io-client/node_modules/debug
ms@2.1.2 /opt/iobroker/node_modules/socket.io-client/node_modules/ms
engine.io-client@3.4.3 /opt/iobroker/node_modules/engine.io-client
component-emitter@1.3.0 /opt/iobroker/node_modules/engine.io-client/node_modules/component-emitter
component-inherit@0.0.3 /opt/iobroker/node_modules/component-inherit
debug@4.1.1 /opt/iobroker/node_modules/engine.io-client/node_modules/debug
ms@2.1.2 /opt/iobroker/node_modules/engine.io-client/node_modules/ms
has-cors@1.1.0 /opt/iobroker/node_modules/has-cors
indexof@0.0.1 /opt/iobroker/node_modules/indexof
parseqs@0.0.5 /opt/iobroker/node_modules/parseqs
better-assert@1.0.2 /opt/iobroker/node_modules/better-assert
callsite@1.0.0 /opt/iobroker/node_modules/callsite
parseuri@0.0.5 /opt/iobroker/node_modules/parseuri
ws@6.1.4 /opt/iobroker/node_modules/engine.io-client/node_modules/ws
async-limiter@1.0.1 /opt/iobroker/node_modules/async-limiter
xmlhttprequest-ssl@1.5.5 /opt/iobroker/node_modules/xmlhttprequest-ssl
yeast@0.1.2 /opt/iobroker/node_modules/yeast
object-component@0.0.3 /opt/iobroker/node_modules/object-component
socket.io-parser@3.3.0 /opt/iobroker/node_modules/socket.io-client/node_modules/socket.io-parser
debug@3.1.0 /opt/iobroker/node_modules/socket.io-client/node_modules/socket.io-parser/node_modules/debug
ms@2.0.0 /opt/iobroker/node_modules/socket.io-client/node_modules/socket.io-parser/node_modules/ms
to-array@0.1.4 /opt/iobroker/node_modules/to-array
socket.io-parser@3.4.1 /opt/iobroker/node_modules/socket.io-parser
debug@4.1.1 /opt/iobroker/node_modules/socket.io-parser/node_modules/debug
ms@2.1.2 /opt/iobroker/node_modules/socket.io-parser/node_modules/ms
iobroker.discovery@2.3.11 /opt/iobroker/node_modules/iobroker.discovery
netmask@1.0.6 /opt/iobroker/node_modules/netmask
node-mndp@0.0.3 /opt/iobroker/node_modules/node-mndp
node-ssdp@4.0.0 /opt/iobroker/node_modules/node-ssdp
async@2.6.3 /opt/iobroker/node_modules/async
lodash@4.17.20 /opt/iobroker/node_modules/lodash
bluebird@3.7.2 /opt/iobroker/node_modules/bluebird
debug@3.2.6 /opt/iobroker/node_modules/node-ssdp/node_modules/debug
ms@2.1.2 /opt/iobroker/node_modules/node-ssdp/node_modules/ms
ip@1.1.5 /opt/iobroker/node_modules/ip
@serialport/parser-byte-length@8.0.6 /opt/iobroker/node_modules/@serialport/parser-byte-length
@serialport/parser-cctalk@8.0.6 /opt/iobroker/node_modules/@serialport/parser-cctalk
@serialport/parser-delimiter@8.0.6 /opt/iobroker/node_modules/@serialport/parser-delimiter
@serialport/parser-readline@8.0.6 /opt/iobroker/node_modules/@serialport/parser-readline
@serialport/parser-ready@8.0.6 /opt/iobroker/node_modules/@serialport/parser-ready
@serialport/parser-regex@8.0.6 /opt/iobroker/node_modules/@serialport/parser-regex
ansi-regex@2.1.1 /opt/iobroker/node_modules/ansi-regex
aproba@1.2.0 /opt/iobroker/node_modules/aproba
are-we-there-yet@1.1.5 /opt/iobroker/node_modules/are-we-there-yet
delegates@1.0.0 /opt/iobroker/node_modules/delegates
readable-stream@2.3.7 /opt/iobroker/node_modules/readable-stream
isarray@1.0.0 /opt/iobroker/node_modules/readable-stream/node_modules/isarray
process-nextick-args@2.0.1 /opt/iobroker/node_modules/process-nextick-args
string_decoder@1.1.1 /opt/iobroker/node_modules/string_decoder
util-deprecate@1.0.2 /opt/iobroker/node_modules/util-deprecate
base64-js@1.3.1 /opt/iobroker/node_modules/base64-js
bindings@1.5.0 /opt/iobroker/node_modules/bindings
file-uri-to-path@1.0.0 /opt/iobroker/node_modules/file-uri-to-path
buffer@5.6.0 /opt/iobroker/node_modules/buffer
ieee754@1.1.13 /opt/iobroker/node_modules/ieee754
chownr@1.1.4 /opt/iobroker/node_modules/chownr
code-point-at@1.1.0 /opt/iobroker/node_modules/code-point-at
console-control-strings@1.1.0 /opt/iobroker/node_modules/console-control-strings
decompress-response@4.2.1 /opt/iobroker/node_modules/decompress-response
mimic-response@2.1.0 /opt/iobroker/node_modules/mimic-response
deep-extend@0.6.0 /opt/iobroker/node_modules/deep-extend
dgram@1.0.1 /opt/iobroker/node_modules/dgram
dns-packet@1.3.1 /opt/iobroker/node_modules/dns-packet
end-of-stream@1.4.4 /opt/iobroker/node_modules/end-of-stream
once@1.4.0 /opt/iobroker/node_modules/once
wrappy@1.0.2 /opt/iobroker/node_modules/wrappy
expand-template@2.0.3 /opt/iobroker/node_modules/expand-template
fs-constants@1.0.0 /opt/iobroker/node_modules/fs-constants
gauge@2.7.4 /opt/iobroker/node_modules/gauge
has-unicode@2.0.1 /opt/iobroker/node_modules/has-unicode
object-assign@4.1.1 /opt/iobroker/node_modules/object-assign
signal-exit@3.0.3 /opt/iobroker/node_modules/signal-exit
string-width@1.0.2 /opt/iobroker/node_modules/string-width
is-fullwidth-code-point@1.0.0 /opt/iobroker/node_modules/is-fullwidth-code-point
number-is-nan@1.0.1 /opt/iobroker/node_modules/number-is-nan
strip-ansi@3.0.1 /opt/iobroker/node_modules/strip-ansi
wide-align@1.1.3 /opt/iobroker/node_modules/wide-align
github-from-package@0.0.0 /opt/iobroker/node_modules/github-from-package
ini@1.3.5 /opt/iobroker/node_modules/ini
minimist@1.2.5 /opt/iobroker/node_modules/minimist
mkdirp-classic@0.5.3 /opt/iobroker/node_modules/mkdirp-classic
napi-build-utils@1.0.2 /opt/iobroker/node_modules/napi-build-utils
nan@2.14.1 /opt/iobroker/node_modules/nan
noop-logger@0.1.1 /opt/iobroker/node_modules/noop-logger
npmlog@4.1.2 /opt/iobroker/node_modules/npmlog
set-blocking@2.0.0 /opt/iobroker/node_modules/set-blocking
pump@3.0.0 /opt/iobroker/node_modules/pump
simple-concat@1.0.1 /opt/iobroker/node_modules/simple-concat
simple-get@3.1.0 /opt/iobroker/node_modules/simple-get
strip-json-comments@2.0.1 /opt/iobroker/node_modules/strip-json-comments
tar-fs@2.1.0 /opt/iobroker/node_modules/tar-fs
tar-stream@2.1.3 /opt/iobroker/node_modules/tar-stream
bl@4.0.2 /opt/iobroker/node_modules/bl
inherits@2.0.4 /opt/iobroker/node_modules/bl/node_modules/inherits
readable-stream@3.6.0 /opt/iobroker/node_modules/bl/node_modules/readable-stream
readable-stream@3.6.0 /opt/iobroker/node_modules/tar-stream/node_modules/readable-stream
which-pm-runs@1.0.0 /opt/iobroker/node_modules/which-pm-runs
detect-libc@1.0.3 /opt/iobroker/node_modules/detect-libc
mkdirp@0.5.5 /opt/iobroker/node_modules/mkdirp
prebuild-install@5.3.5 /opt/iobroker/node_modules/prebuild-install
node-abi@2.18.0 /opt/iobroker/node_modules/node-abi
semver@5.7.1 /opt/iobroker/node_modules/node-abi/node_modules/semver
rc@1.2.8 /opt/iobroker/node_modules/rc
@serialport/binding-abstract@8.0.6 /opt/iobroker/node_modules/@serialport/binding-abstract
debug@4.1.1 /opt/iobroker/node_modules/@serialport/binding-abstract/node_modules/debug
ms@2.1.2 /opt/iobroker/node_modules/@serialport/binding-abstract/node_modules/ms
@serialport/binding-mock@8.0.6 /opt/iobroker/node_modules/@serialport/binding-mock
debug@4.1.1 /opt/iobroker/node_modules/@serialport/binding-mock/node_modules/debug
ms@2.1.2 /opt/iobroker/node_modules/@serialport/binding-mock/node_modules/ms
@serialport/bindings@8.0.8 /opt/iobroker/node_modules/@serialport/bindings
debug@4.1.1 /opt/iobroker/node_modules/@serialport/bindings/node_modules/debug
ms@2.1.2 /opt/iobroker/node_modules/@serialport/bindings/node_modules/ms
@serialport/stream@8.0.6 /opt/iobroker/node_modules/@serialport/stream
debug@4.1.1 /opt/iobroker/node_modules/@serialport/stream/node_modules/debug
ms@2.1.2 /opt/iobroker/node_modules/@serialport/stream/node_modules/ms
mdns-discovery@0.2.6 /opt/iobroker/node_modules/mdns-discovery
debug@2.2.0 /opt/iobroker/node_modules/mdns-discovery/node_modules/debug
ms@0.7.1 /opt/iobroker/node_modules/mdns-discovery/node_modules/ms
serialport@8.0.8 /opt/iobroker/node_modules/serialport
debug@4.1.1 /opt/iobroker/node_modules/serialport/node_modules/debug
ms@2.1.2 /opt/iobroker/node_modules/serialport/node_modules/ms

Gruß Stefan

Hallo,
hab ioBroker auf einem Tinkerboard S auf dem internen Speicher am laufen. Wollte nur das Board in ein anderes Gehäuse mit Lüfter umziehen, weil er immer sehr heiß wird. Hab dann noch die Befehle sudo upt-get update/upgrade ausgeführt, das wahr wahrscheinlich der Fehler! Jetzt läuft der ioBroker nicht mehr.
Hab schon einiges probiert, hab aber nicht so viel Erfahrung!
Jetzt könnte ich neu aufsetzen, hab aber die letzten Tage meine Poolsteuerung und andere Projekte realisiert und leider kein aktuelles Backup davon, deswegen muss das System wieder starten.
Ich bitte um Hilfe!
Hab Debian Buster mit node 12.10.3 und npm 6.14.6 installiert.
Bei dem Befehl ps -A | grep iobroker kommt nichts, wenn der js-Controller neu gestartet wird kommt:

internal/modules/cjs/loader.js:968
throw err;
^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/controller.js'
at Function.Module._resolveFilename (internal/modules/cjs/loader.js:965:15)
at Function.Module._load (internal/modules/cjs/loader.js:841:27)
at Function.executeUserEntryPoint [as runMain] (internal/modules/run_main.js:71:12)
at internal/main/run_main_module.js:17:47 {
code: 'MODULE_NOT_FOUND',
requireStack: []
}
Hab auch versucht den controller, Admin und Discovery Adapter neu zu installieren, aber ohne Erfolg.
Desweiteren kommt die Meldung "No connection to states 192.168.178.32:6379[redis]"

Ich weiß leider nicht mehr weiter und bitte um Hilfe, das die Stundenlange Arbeit der letzten Tage nicht umsonst waren.
Danke!

Gruß Stefan

History hab ich noch nicht benutzt,da stürzte der Broker immer ab. Ich denke, das lag am wenigen RAM vom Pi. Bei VIS ist alles komplett da.

Der Tagesabschluß bei dem Besagten Skript hat auch funktioniert, von daher ignoriere ich die Info mit dem Datum.

So, funktioniert wieder.

Vielen Dank für die schnelle Hilfe!!! Top!!!

Hab Redis installiert,dann einen Reset der iobroker Installation laut der Anleitung im Forum von Stabilostick(Danke dafür) durchgeführt.

Und der Iobroker war wieder erreichbar und hat ohne einen weiteren restore Befehl das minimal Backup installiert.

Scheint auch mit dem Minimal Backup zu funktionieren.

Beim laden des Komplett Backups kommt die Fehlermeldung:

! host.tinkerboard Cannot find extracted file from file "/opt/iobroker/node_modules/iobroker.js-controller/tmp/backup/backup.json"

Aber läuft soweit alles außer bei einem Skript kommt die Info:

! javascript.1 2018-09-01 20:19:33.113 info script.js.sonstige.Strom: Fehler beim Auslesen des Datums. Eventuell falsche Syntax? null (Error:TypeError: Cannot read property 'match' of null)

Mal sehen ob der Tagesabschluß funktioniert

Vielleicht hat jemand für die Fehler noch eine Lösung, ansonsten nochmal Vielen Dank!!!

Gruß