Hallo zusammen, leider kann ich eine ics Datei nicht einlesen. Es wird versucht die Datei einzulesen, jedoch gibt es dann am Ende einen Plugin sentry destroyed . Ich sehe viele Einträge wo er import mit dem Zeitformat nicht stimmt.
Habt ihr eine Idee ?
iobroker.2020-12-20.log.html code_text
Vielen Dank
Hallo,
ich nutze die iobroker Cloud um meine Geräte zu verwalten.
HW ist ein PI 2 mit ELV Homematic Platine drauf.
Ich habe Homemamtic (RPC.1) und Homematic IP (RPC.0) Geräte angebunden.
Jedoch sehe ich die Homematic IP Geräte nicht im iobroker Cloud Adapter als Smart Geräte.
Hat da jemand eine Idee ?
Anbei die H und HIP Geräte:
und unter Aufzählungen / Rooms sind diese dem richtigen Raum zugeordnet.
Homematic Geräte sind dort:
Anbei die SMART Aufzählungen :
Danke vielmals!
Viele Grüße,
Wolfgang
Hi Alex,
danke vielmals. Ich habe nichts an den Homematic Geräten aktualisiert .
Anbei sind die Ergebnisse:
! ````
pi@raspberrypi:~ $ sudo pivccu-info
piVCCU version: 2.31.25-25
Kernel modules: Available
Raw UART dev: Available
Board serial: OEQ0607502
State: RUNNING
PID: 30034
IP: 192.168.178.122
IP: 2a0a:a544:422f:0:78da:d7ff:feb4:9b8a
CPU use: 832.90 seconds
BlkIO use: 160.00 KiB
Link: vethpivccu
TX bytes: 109.56 KiB
RX bytes: 182.53 KiB
Total bytes: 292.09 KiB
pi@raspberrypi:~ $ sudo pivccu-attach cat /var/log/messages
Apr 23 09:57:21 homematic-ccu2 syslog.info syslogd started: BusyBox v1.20.2
Apr 23 09:57:21 homematic-ccu2 user.notice kernel: klogd started: BusyBox v1.20.2 (2018-01-15 15:55:20 CET)
Apr 23 07:57:24 homematic-ccu2 daemon.info ifplugd(eth0)[141]: ifplugd 0.28 initializing.
Apr 23 07:57:24 homematic-ccu2 daemon.info ifplugd(eth0)[141]: Using interface eth0/7A:DA:D7:B4:9B:8A with driver <veth>(version: 1.0)
Apr 23 07:57:24 homematic-ccu2 daemon.info ifplugd(eth0)[141]: Using detection mode: SIOCETHTOOL
Apr 23 07:57:24 homematic-ccu2 daemon.info ifplugd(eth0)[141]: Initialization complete, link beat detected.
Apr 23 07:57:24 homematic-ccu2 daemon.warn ifplugd(eth0)[141]: Could not open /dev/tty, cannot beep.
Apr 23 07:57:24 homematic-ccu2 daemon.info ifplugd(eth0)[141]: Executing '/etc/ifplugd/ifplugd.action eth0 up'.
Apr 23 07:57:24 homematic-ccu2 daemon.warn ifplugd(eth0)[141]: client: net.ipv4.tcp_timestamps = 0
Apr 23 07:57:25 homematic-ccu2 daemon.warn ifplugd(eth0)[141]: client: udhcpc (v1.20.2) started
Apr 23 09:57:25 homematic-ccu2 user.debug setclock: Try to get time from ntp.homematic.com
Apr 23 09:57:25 homematic-ccu2 user.debug setclock: Try to get time from 192.168.178.1
Apr 23 09:57:25 homematic-ccu2 user.debug setclock: Mon Apr 23 09:57:25 CEST 2018
Apr 23 07:57:25 homematic-ccu2 daemon.warn ifplugd(eth0)[141]: client: Sending discover...
Apr 23 07:57:26 homematic-ccu2 daemon.warn ifplugd(eth0)[141]: client: Sending select for 192.168.178.122...
Apr 23 07:57:26 homematic-ccu2 daemon.warn ifplugd(eth0)[141]: client: Lease of 192.168.178.122 obtained, lease time 864000
Apr 23 07:57:26 homematic-ccu2 daemon.warn ifplugd(eth0)[141]: client: rm: can't remove '/var/etc/resolv.conf': No such file or directory
Apr 23 07:57:26 homematic-ccu2 daemon.warn ifplugd(eth0)[141]: client: udhcpc (v1.20.2) started
Apr 23 07:57:26 homematic-ccu2 daemon.warn ifplugd(eth0)[141]: client: Sending discover...
Apr 23 07:57:27 homematic-ccu2 daemon.warn ifplugd(eth0)[141]: client: Sending select for 192.168.178.122...
Apr 23 07:57:27 homematic-ccu2 daemon.warn ifplugd(eth0)[141]: client: Lease of 192.168.178.122 obtained, lease time 864000
Apr 23 07:57:27 homematic-ccu2 daemon.info ifplugd(eth0)[141]: Program executed successfully.
Apr 23 07:57:30 homematic-ccu2 user.info logger: Updating RF Lan Gateway Coprocessor Firmware
Apr 23 07:57:30 homematic-ccu2 user.debug update-coprocessor: firmware filename is: coprocessor_update_hm_only.eq3
Apr 23 07:57:30 homematic-ccu2 user.info logger: Updating RF Lan Gateway Firmware
Apr 23 07:57:30 homematic-ccu2 user.info update-lgw-firmware: No gateway found in config file /etc/config/rfd.conf
Apr 23 07:57:30 homematic-ccu2 user.info logger: Updating Wired Lan Gateway Firmware
Apr 23 07:57:30 homematic-ccu2 user.info update-lgw-firmware: No gateway found in config file /etc/config/hs485d.conf
Apr 23 09:57:33 homematic-ccu2 user.info update-coprocessor: Version: 2.8.6
Apr 23 09:57:33 homematic-ccu2 user.info update-coprocessor: No update necessary
Apr 23 09:57:54 homematic-ccu2 user.info kernel: [263415.441277] eq3loop: eq3loop_close_slave() ttyS0
Apr 23 09:57:54 homematic-ccu2 user.info kernel: [263415.448997] eq3loop: eq3loop_close_slave() ttyS0
Apr 23 09:58:06 homematic-ccu2 user.err rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IsePersist::LoadObject -> Error ReadIsTag tag =chnid [iseDOMpersist.cpp:705]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> Error loading from file. ObjectID: 1802 type: HSSDP [iseDOM.cpp:2363]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:09 homematic-ccu2 local0.err ReGaHss: Error: IseDOM::PersistLoad -> ReadElement failed! OID: oid Value: 1802 [iseDOM.cpp:2373]
Apr 23 09:58:25 homematic-ccu2 user.debug setclock: Try to get time from ntp.homematic.com
Apr 23 09:58:25 homematic-ccu2 user.debug setclock: Mon Apr 23 09:58:25 CEST 2018
Apr 23 09:59:58 homematic-ccu2 user.crit kernel: [263539.739270] Under-voltage detected! (0x00050005)
Apr 23 10:00:34 homematic-ccu2 user.crit kernel: [263575.101424] Under-voltage detected! (0x00050005)
Apr 23 10:00:40 homematic-ccu2 user.info kernel: [263581.341244] Voltage normalised (0x00000000)
Apr 23 10:01:07 homematic-ccu2 user.crit kernel: [263608.380241] Under-voltage detected! (0x00050005)
Apr 23 10:01:13 homematic-ccu2 user.info kernel: [263614.619347] Voltage normalised (0x00000000)
Apr 23 10:01:21 homematic-ccu2 user.crit kernel: [263622.938655] Under-voltage detected! (0x00050005)
Apr 23 10:01:42 homematic-ccu2 user.info kernel: [263643.736533] Voltage normalised (0x00000000)
Apr 23 10:08:44 homematic-ccu2 user.crit kernel: [264065.971372] Under-voltage detected! (0x00050005)
Apr 23 10:08:49 homematic-ccu2 user.info kernel: [264070.131231] Voltage normalised (0x00000000)
Apr 23 10:09:30 homematic-ccu2 user.crit kernel: [264111.730633] Under-voltage detected! (0x00050005)
Apr 23 10:09:34 homematic-ccu2 user.info kernel: [264115.890405] Voltage normalised (0x00000000)
Apr 23 10:10:39 homematic-ccu2 user.crit kernel: [264180.368250] Under-voltage detected! (0x00050005)
Apr 23 10:10:45 homematic-ccu2 user.info kernel: [264186.607927] Voltage normalised (0x00000000)
pi@raspberrypi:~ $</veth>
****geändert: Code in Code-Tags und Spoiler; Homoran (Admin)****Ich habe das fertige Image installiert . -> Homematic All-In-One mit piVCCU
Ja, da hast du natürlich Recht 
Viele Grüße
Hallo,
danke vielmals für die schnellen Antworten!
Es handelt sich um einen Rasp-Pi 2 mit dem ELV-Homematic-Modul -> Denke dies ist dann die PiVCCU, oder ?
Ich habe schon mehrer Tage gewartet, jedoch hat dies nicht geholfen .
Dann habe ich die Dienste neu gestartet, den Pi rebootet . Hat leider alles nicht geholfen 
Gibt es vielleicht die Möglichkeit die Configs aus der CCU2 zu sichern (iobroker backup sichert dies ja nicht, oder) ? -> Dann könnte ich das ganze noch einmal neu installieren.
Danke euch vielmals!
Hallo,
ich habe nun iobroker mehrer Monate ohne Probleme im Einsatz und das System habe ich letzte Woche upgedated.
Nun funktioniert leider Homemtic nicht mehr.
hm-rega.1 bleibt gelb und wenn ich auf die Webseite gehe kommt nur "Die Homematic CCU2 ist noch nicht bereit".
hm-rpc.1 ist grün und ich sehe auch im Silly-Log Modus , dass die Geräte die Temperaturen z.B. übertragen.
Kann mir jemand sagen wie ich ggf. wieder die CCU2-Webseite zum Laufen bekomme ?
Im Log steht ReGaHSS down .
-> Ich habe auch schon einmal das ganze System upgedated, hat leider nicht geholfen.
Danke vielmals
Viele Grüße
