Wartung am 15.11. – Forum ab 22:00 Uhr nicht erreichbar

[Jezinka]

@MichMein
Ich habe gerade bemerkt, dass Ihre Konfigurationsdatei keine Kommas enthält. Ich lege meine bei, wahrscheinlich liegt ein Fehler darin, weil der Ersteller erwähnt hat, dass es ein Problem mit der Aktualisierung der Zeit geben wird. Ich dachte es würde automatisch behoben

[MakeImage]
;LogImageLocation = /log/source
WaitBeforeTakingPicture = 5
ImageQuality = 5
ImageSize = VGA

[Alignment]
InitialRotate = -93
/config/ref0.jpg 142, 151
/config/ref1.jpg 414, 45
SearchFieldX = 20
SearchFieldY = 20


[Digits]
Model = /config/dig0650s3.tflite
LogImageLocation = /log/digit
ModelInputSize = 20 32
digit1, 271, 56, 34, 55
digit2, 321, 56, 34, 55
digit3, 373, 56, 34, 55

[Analog]
Model = /config/ana0630s2.tflite
LogImageLocation = /log/analog
ModelInputSize = 32 32
analog1, 426, 125, 105, 105
analog2, 389, 249, 103, 103
analog3, 274, 298, 101, 101
analog4, 160, 252, 99, 99

[PostProcessing]
DecimalShift = 0
PreValueUse = true
PreValueAgeStartup = 30
AllowNegativeRates = false
MaxRateValue = 0.1
ErrorMessage = true
CheckDigitIncreaseConsistency = true

[MQTT]
Uri = mqtt://192.168.10.45:1883
Topic = watermeter/readout
ClientID = wasser
user = mqttuser
password = mqttpassword

[AutoTimer]
AutoStart = true
Intervall = 4.85

[Debug]
Logfile = true


[Ende]

[watcherkb]

@MichMein Danke, habs auskommentiert. trotzdem wird mir das Rechteck angezeigt. Und woher kommen die 3 hinteren Nachkommastellen?

Edit: Problem mit dem Analog-Kästchen gefunden: irgendwie hat er die Digital Rois mit den analogen durcheinander gebracht, obwohl der analog auskommentiert war.

[watcherkb]

@Jezinka ich habe auch Kommas drin, sieht gut aus bei dir. Kann nichts feststellen.

[Jezinka]

@watcherkb Ich habe es so geändert, dass es so aussieht, und es scheint vorerst zu funktionieren. Aber ich habe die Roler-Version der Firmware verwendet.

[MakeImage]
;LogImageLocation = /log/source
WaitBeforeTakingPicture = 5
ImageQuality = 5
ImageSize = VGA

[Alignment]
InitialRotate = -93
/config/ref0.jpg 142 151
/config/ref1.jpg 414 45
SearchFieldX = 20
SearchFieldY = 20


[Digits]
Model = /config/dig0650s3.tflite
LogImageLocation = /log/digit
ModelInputSize = 20 32
digit1 271 56 34 55
digit2 321 56 34 55
digit3 373 56 34 55

[Analog]
Model = /config/ana0630s2.tflite
LogImageLocation = /log/analog
ModelInputSize = 32 32
analog1 426 125 105 105
analog2 389 249 103 103
analog3 274 298 101 101
analog4 160 252 99 99

[PostProcessing]
DecimalShift = 0
PreValueUse = true
PreValueAgeStartup = 30
AllowNegativeRates = false
MaxRateValue = 0.1
ErrorMessage = true
CheckDigitIncreaseConsistency = true

[MQTT]
Uri = mqtt://192.168.10.45:1883
Topic = watermeter/readout
TopicError = watermeter/error
ClientID = wasser
user = mqttuser
password = mqttpassword

[AutoTimer]
AutoStart = true
Intervall = 4.85

[Debug]
Logfile = true
LogfileRetentionInDays = 10

[System]
TimeZone = CET-1CEST,M3.5.0,M10.5.0/3
TimeUpdateIntervall = 24

[Ende]

[watcherkb]

@Jezinka achso, ne ich habe noch die Master 4.0

[MichMein]

@Jezinka @watcherkb,

ich habe die oben gezeigten config Einträge nicht von meinem System sondern habe aus dem GitHub kopiert. Ich weiß also nicht was richtig ist.
Bezüglich der vielen Nachkommastellen hatte @jomjol in den letzten Tagen mal geschrieben das es sich hierbei vermutlich um einen Rundungsfehler handelt, sollte aber fast egal sein da ja per mqtt nur die Stellen ausgegeben werden die auch konfiguriert sind.

[Jezinka]

@jomjol
Ich habe die neue Version vom Rollen verwendet, aber nach einiger Zeit wieder ein Fehler. File does not exist
Ich weiß nicht, ob ich eine Verbindung herstellen kann, damit ich eine Anpassung vornehmen kann. Es scheint sich in einem Notfallmodus zu befinden. Kann ich eine Verbindung herstellen? Ich sehe einen anderen AP im Netzwerk (echtes Netzwerk).

Ich bin dort angekommen und es ist eine Aussage darüber, was aus dem Protokoll passiert ist. Es scheint festgefahren zu sein.

2020-12-02_14-10-51: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_14-10-51: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_14-10-51: sent publish successful in MQTTPublish, msg_id=43037, watermeter/readout, 632.5394
2020-12-02_14-10-51: sent publish successful in MQTTPublish, msg_id=35208, watermeter/error, 
2020-12-02_14-10-51: task_autodoFlow - round done
2020-12-02_14-10-51: CPU Temperature: 56.7
2020-12-02_14-14-06: task_autodoFlow - next round
2020-12-02_14-14-06: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_14-14-12: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_14-15-14: FlowControll.doFlow - ClassFlowDigit
2020-12-02_14-15-24: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_14-15-36: handler_wasserzaehler
2020-12-02_14-15-36: handler_prevalue
2020-12-02_14-15-37: handler_wasserzaehler
2020-12-02_13-16-28: Time Synchzronisation nicht erfolgreich ...
2020-12-02_14-16-28: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_14-16-28: ============================== Main Started =======================================
2020-12-02_14-16-30: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_14-16-30: task_autodoFlow - next round
2020-12-02_14-16-30: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_14-16-36: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_14-17-16: FlowControll.doFlow - ClassFlowDigit
2020-12-02_13-17-33: Time erfolgreich ...
2020-12-02_14-17-34: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_14-17-34: ============================== Main Started =======================================
2020-12-02_14-17-36: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_14-17-36: task_autodoFlow - next round
2020-12-02_14-17-36: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_14-17-42: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_14-18-45: FlowControll.doFlow - ClassFlowDigit
2020-12-02_13-19-09: Time erfolgreich ...
2020-12-02_14-19-10: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_14-19-10: ============================== Main Started =======================================
2020-12-02_14-19-12: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_14-19-12: task_autodoFlow - next round
2020-12-02_14-19-12: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_14-19-18: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_13-19-38: Time erfolgreich ...
2020-12-02_14-19-39: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_14-19-39: ============================== Main Started =======================================
2020-12-02_14-19-41: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_14-19-41: task_autodoFlow - next round
2020-12-02_14-19-41: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_14-19-47: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_14-19-59: Time Synchzronisation nicht erfolgreich ...
2020-12-02_13-54-59: Time erfolgreich ...
2020-12-02_14-54-59: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_14-54-59: ============================== Main Started =======================================
2020-12-02_14-55-02: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_14-55-02: task_autodoFlow - next round
2020-12-02_14-55-02: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_14-55-07: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_13-55-55: Time erfolgreich ...
2020-12-02_14-55-55: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_14-55-55: ============================== Main Started =======================================
2020-12-02_14-55-58: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_14-55-58: task_autodoFlow - next round
2020-12-02_14-55-58: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_14-56-09: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_13-57-11: Time erfolgreich ...
2020-12-02_14-57-11: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_14-57-12: ============================== Main Started =======================================
2020-12-02_14-57-14: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_14-57-14: task_autodoFlow - next round
2020-12-02_14-57-14: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_14-57-20: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_13-57-42: Time erfolgreich ...
2020-12-02_14-57-43: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_14-57-43: ============================== Main Started =======================================
2020-12-02_14-57-45: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_14-57-45: task_autodoFlow - next round
2020-12-02_14-57-45: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_14-57-51: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_15-01-40: handler_wasserzaehler
2020-12-02_15-01-41: handler_prevalue
2020-12-02_15-01-41: handler_wasserzaehler
2020-12-02_15-01-57: download_get_handler
2020-12-02_15-01-59: download_get_handler

[jomjol]

@Jezinka sagte in Wasserzähler - Version 2 - all-in-device:

@jomjol
Hi, I tested the latest version 4.1.0 and came across unstable behavior and constant restarts. The measurement stopped and the whole thing was weird. At one point, the web interface stopped working and there was only an error message: File not founf.
I had to restart the device and hope to get to the menu and be able to do something. Finally, after some tests, I had to downgrade to the previous version. Now it seems from the log that something still had to remain, because the log listing is different than it used to be.
Health Jirka

2020-12-02_00-00-01: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_00-00-18: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_00-00-18: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_00-00-18: sent publish successful in MQTTPublish, msg_id=32446, watermeter/readout, 632.3781
2020-12-02_00-00-18: task_autodoFlow - round done
2020-12-02_00-00-18: CPU Temperature: 56.7
2020-12-02_00-03-35: task_autodoFlow - next round
2020-12-02_00-03-35: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_00-03-41: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_00-03-47: handler_wasserzaehler
2020-12-02_00-03-48: handler_prevalue
2020-12-02_00-03-48: handler_wasserzaehler
2020-12-02_00-04-42: FlowControll.doFlow - ClassFlowDigit
2020-12-02_00-04-52: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_00-05-10: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_00-05-10: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_00-05-10: sent publish successful in MQTTPublish, msg_id=24532, watermeter/readout, 632.3808
2020-12-02_00-05-11: task_autodoFlow - round done
2020-12-02_00-05-11: CPU Temperature: 53.3
2020-12-02_00-08-26: task_autodoFlow - next round
2020-12-02_00-08-26: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_00-08-32: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_00-08-48: handler_wasserzaehler
2020-12-02_00-08-48: handler_wasserzaehler
2020-12-02_00-08-49: handler_prevalue
2020-12-02_00-09-32: FlowControll.doFlow - ClassFlowDigit
2020-12-02_00-09-43: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_00-10-00: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_00-10-00: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_00-10-00: sent publish successful in MQTTPublish, msg_id=33164, watermeter/readout, 632.3825
2020-12-02_00-10-01: task_autodoFlow - round done
2020-12-02_00-10-01: CPU Temperature: 56.7
2020-12-02_00-13-17: task_autodoFlow - next round
2020-12-02_00-13-17: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_00-13-23: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_00-13-49: handler_wasserzaehler
2020-12-02_00-13-49: handler_wasserzaehler
2020-12-02_00-13-50: handler_prevalue
2020-12-02_00-14-23: FlowControll.doFlow - ClassFlowDigit
2020-12-02_00-14-34: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_00-14-50: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_00-14-50: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_00-14-51: sent publish successful in MQTTPublish, msg_id=51218, watermeter/readout, 632.3825
2020-12-02_00-14-51: task_autodoFlow - round done
2020-12-02_00-14-51: CPU Temperature: 56.7
2020-12-02_00-18-08: task_autodoFlow - next round
2020-12-02_00-18-08: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_00-18-14: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_00-18-50: handler_prevalue
2020-12-02_00-18-50: handler_wasserzaehler
2020-12-02_00-18-51: handler_wasserzaehler
2020-12-02_00-19-14: FlowControll.doFlow - ClassFlowDigit
2020-12-02_00-19-25: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_00-19-42: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_00-19-42: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_00-19-42: sent publish successful in MQTTPublish, msg_id=20002, watermeter/readout, 632.3825
2020-12-02_00-19-42: task_autodoFlow - round done
2020-12-02_00-19-42: CPU Temperature: 56.7
2020-12-02_00-22-59: task_autodoFlow - next round
2020-12-02_00-22-59: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_00-23-05: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_00-23-51: handler_wasserzaehler
2020-12-02_00-23-51: handler_wasserzaehler
2020-12-02_00-23-52: handler_prevalue
2020-12-02_00-24-05: FlowControll.doFlow - ClassFlowDigit
2020-12-02_00-24-17: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_00-24-35: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_00-24-35: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_00-24-35: sent publish successful in MQTTPublish, msg_id=37364, watermeter/readout, 632.3825
2020-12-02_00-24-35: task_autodoFlow - round done
2020-12-02_00-24-35: CPU Temperature: 56.1
2020-12-02_00-27-50: task_autodoFlow - next round
2020-12-02_00-27-50: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_00-27-56: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_00-28-52: handler_wasserzaehler
2020-12-02_00-28-52: handler_wasserzaehler
2020-12-02_00-28-52: handler_prevalue
2020-12-02_00-28-56: FlowControll.doFlow - ClassFlowDigit
2020-12-02_00-29-07: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_00-29-24: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_00-29-24: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_00-29-24: sent publish successful in MQTTPublish, msg_id=16405, watermeter/readout, 632.3825
2020-12-02_00-29-24: task_autodoFlow - round done
2020-12-02_00-29-24: CPU Temperature: 55.6
2020-12-02_00-32-41: task_autodoFlow - next round
2020-12-02_00-32-41: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_00-32-47: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_00-33-47: FlowControll.doFlow - ClassFlowDigit
2020-12-02_00-33-53: handler_wasserzaehler
2020-12-02_00-33-53: handler_wasserzaehler
2020-12-02_00-33-54: handler_prevalue
2020-12-02_00-33-58: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_00-34-15: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_00-34-15: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_00-34-15: sent publish successful in MQTTPublish, msg_id=56207, watermeter/readout, 632.3825
2020-12-02_00-34-15: task_autodoFlow - round done
2020-12-02_00-34-15: CPU Temperature: 56.1
2020-12-02_00-37-32: task_autodoFlow - next round
2020-12-02_00-37-32: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_00-37-38: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_00-38-38: FlowControll.doFlow - ClassFlowDigit
2020-12-02_00-38-50: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_00-38-54: handler_wasserzaehler
2020-12-02_00-38-54: handler_wasserzaehler
2020-12-02_00-38-55: handler_prevalue
2020-12-02_00-39-09: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_00-39-09: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_00-39-09: sent publish successful in MQTTPublish, msg_id=19082, watermeter/readout, 632.3825
2020-12-02_00-39-10: task_autodoFlow - round done
2020-12-02_00-39-10: CPU Temperature: 56.1
2020-12-02_00-42-23: task_autodoFlow - next round
2020-12-02_00-42-23: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_00-42-29: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_00-43-29: FlowControll.doFlow - ClassFlowDigit
2020-12-02_00-43-40: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_00-43-55: handler_wasserzaehler
2020-12-02_00-43-55: handler_wasserzaehler
2020-12-02_00-43-55: handler_prevalue
2020-12-02_00-44-11: ============================== Main Started =======================================
2020-12-02_00-44-13: task_autodoFlow - next round
2020-12-02_00-44-13: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_00-44-19: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_00-45-18: FlowControll.doFlow - ClassFlowDigit
2020-12-02_00-45-29: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_00-45-46: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_00-45-46: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_00-45-46: sent publish successful in MQTTPublish, msg_id=51152, watermeter/readout, 632.3825
2020-12-02_00-45-46: task_autodoFlow - round done
2020-12-02_00-45-46: CPU Temperature: 57.2
2020-12-02_00-48-56: handler_prevalue
2020-12-02_00-48-56: handler_wasserzaehler
2020-12-02_00-48-56: handler_wasserzaehler
2020-12-02_00-49-04: task_autodoFlow - next round
2020-12-02_00-49-04: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_00-49-10: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_00-50-10: FlowControll.doFlow - ClassFlowDigit
2020-12-02_00-50-21: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_00-50-38: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_00-50-38: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_00-50-38: sent publish successful in MQTTPublish, msg_id=1139, watermeter/readout, 632.3825
2020-12-02_00-50-38: task_autodoFlow - round done
2020-12-02_00-50-38: CPU Temperature: 56.7
2020-12-02_00-53-55: task_autodoFlow - next round
2020-12-02_00-53-55: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_00-53-57: handler_wasserzaehler
2020-12-02_00-53-57: handler_prevalue
2020-12-02_00-53-57: handler_wasserzaehler
2020-12-02_00-54-01: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_00-55-01: FlowControll.doFlow - ClassFlowDigit
2020-12-02_00-55-12: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_00-55-29: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_00-55-29: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_00-55-29: sent publish successful in MQTTPublish, msg_id=63901, watermeter/readout, 632.3825
2020-12-02_00-55-29: task_autodoFlow - round done
2020-12-02_00-55-29: CPU Temperature: 56.1
2020-12-02_00-58-46: task_autodoFlow - next round
2020-12-02_00-58-46: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_00-58-52: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_00-58-58: handler_wasserzaehler
2020-12-02_00-58-58: handler_wasserzaehler
2020-12-02_00-58-59: handler_prevalue
2020-12-02_00-59-52: FlowControll.doFlow - ClassFlowDigit
2020-12-02_01-00-03: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_01-00-20: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_01-00-20: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_01-00-20: sent publish successful in MQTTPublish, msg_id=41057, watermeter/readout, 632.3825
2020-12-02_01-00-20: task_autodoFlow - round done
2020-12-02_01-00-20: CPU Temperature: 56.7
2020-12-02_01-03-37: task_autodoFlow - next round
2020-12-02_01-03-37: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-03-43: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_01-03-59: handler_wasserzaehler
2020-12-02_01-03-59: handler_wasserzaehler
2020-12-02_01-04-00: handler_prevalue
2020-12-02_01-04-43: FlowControll.doFlow - ClassFlowDigit
2020-12-02_01-04-55: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_01-05-12: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_01-05-12: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_01-05-13: sent publish successful in MQTTPublish, msg_id=49290, watermeter/readout, 632.3825
2020-12-02_01-05-13: task_autodoFlow - round done
2020-12-02_01-05-13: CPU Temperature: 56.1
2020-12-02_01-08-28: task_autodoFlow - next round
2020-12-02_01-08-28: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-08-34: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_01-09-00: handler_wasserzaehler
2020-12-02_01-09-00: handler_prevalue
2020-12-02_01-09-01: handler_wasserzaehler
2020-12-02_01-09-34: FlowControll.doFlow - ClassFlowDigit
2020-12-02_01-09-46: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_01-10-02: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_01-10-02: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_01-10-02: sent publish successful in MQTTPublish, msg_id=4697, watermeter/readout, 632.3825
2020-12-02_01-10-03: task_autodoFlow - round done
2020-12-02_01-10-03: CPU Temperature: 56.7
2020-12-02_01-13-19: task_autodoFlow - next round
2020-12-02_01-13-19: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-13-25: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_01-14-01: handler_wasserzaehler
2020-12-02_01-14-02: handler_wasserzaehler
2020-12-02_01-14-02: handler_prevalue
2020-12-02_01-14-25: FlowControll.doFlow - ClassFlowDigit
2020-12-02_01-14-37: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_01-14-54: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_01-14-54: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_01-14-54: sent publish successful in MQTTPublish, msg_id=38512, watermeter/readout, 632.3825
2020-12-02_01-14-54: task_autodoFlow - round done
2020-12-02_01-14-54: CPU Temperature: 53.3
2020-12-02_01-18-10: task_autodoFlow - next round
2020-12-02_01-18-10: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-18-16: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_01-19-02: handler_prevalue
2020-12-02_01-19-17: FlowControll.doFlow - ClassFlowDigit
2020-12-02_01-19-28: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_01-19-45: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_01-19-45: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_01-19-45: sent publish successful in MQTTPublish, msg_id=37464, watermeter/readout, 632.3843
2020-12-02_01-19-45: task_autodoFlow - round done
2020-12-02_01-19-45: CPU Temperature: 56.7
2020-12-02_01-23-01: task_autodoFlow - next round
2020-12-02_01-23-01: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-23-07: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_01-24-03: handler_wasserzaehler
2020-12-02_01-24-03: handler_prevalue
2020-12-02_01-24-03: handler_wasserzaehler
2020-12-02_01-24-08: FlowControll.doFlow - ClassFlowDigit
2020-12-02_01-24-19: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_01-24-36: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_01-24-36: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_01-24-36: sent publish successful in MQTTPublish, msg_id=44666, watermeter/readout, 632.3843
2020-12-02_01-24-36: task_autodoFlow - round done
2020-12-02_01-24-36: CPU Temperature: 56.7
2020-12-02_01-27-52: task_autodoFlow - next round
2020-12-02_01-27-52: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-27-58: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_01-28-58: FlowControll.doFlow - ClassFlowDigit
2020-12-02_01-29-04: handler_wasserzaehler
2020-12-02_01-29-04: handler_prevalue
2020-12-02_01-29-05: handler_wasserzaehler
2020-12-02_01-29-10: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_01-29-27: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_01-29-27: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_01-29-27: sent publish successful in MQTTPublish, msg_id=43191, watermeter/readout, 632.3843
2020-12-02_01-29-27: task_autodoFlow - round done
2020-12-02_01-29-27: CPU Temperature: 56.1
2020-12-02_01-32-43: task_autodoFlow - next round
2020-12-02_01-32-43: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-32-49: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_01-33-49: FlowControll.doFlow - ClassFlowDigit
2020-12-02_01-34-01: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_01-34-05: handler_wasserzaehler
2020-12-02_01-34-05: handler_prevalue
2020-12-02_01-34-06: handler_wasserzaehler
2020-12-02_01-34-19: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_01-34-19: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_01-34-19: sent publish successful in MQTTPublish, msg_id=64116, watermeter/readout, 632.3843
2020-12-02_01-34-19: task_autodoFlow - round done
2020-12-02_01-34-19: CPU Temperature: 56.1
2020-12-02_01-37-34: task_autodoFlow - next round
2020-12-02_01-37-34: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-37-40: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_01-38-40: FlowControll.doFlow - ClassFlowDigit
2020-12-02_01-38-52: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_01-39-06: handler_wasserzaehler
2020-12-02_01-39-06: handler_wasserzaehler
2020-12-02_01-39-06: handler_prevalue
2020-12-02_01-39-23: ============================== Main Started =======================================
2020-12-02_01-39-25: task_autodoFlow - next round
2020-12-02_01-39-25: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-39-30: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_01-40-31: FlowControll.doFlow - ClassFlowDigit
2020-12-02_01-40-42: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_01-41-00: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_01-41-00: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_01-41-00: sent publish successful in MQTTPublish, msg_id=18719, watermeter/readout, 632.3843
2020-12-02_01-41-00: task_autodoFlow - round done
2020-12-02_01-41-00: CPU Temperature: 57.2
2020-12-02_01-44-07: handler_wasserzaehler
2020-12-02_01-44-07: handler_prevalue
2020-12-02_01-44-07: handler_wasserzaehler
2020-12-02_01-44-16: task_autodoFlow - next round
2020-12-02_01-44-16: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-44-21: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_01-45-21: FlowControll.doFlow - ClassFlowDigit
2020-12-02_01-45-33: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_01-45-50: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_01-45-50: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_01-45-50: sent publish successful in MQTTPublish, msg_id=2481, watermeter/readout, 632.3843
2020-12-02_01-45-50: task_autodoFlow - round done
2020-12-02_01-45-51: CPU Temperature: 53.3
2020-12-02_01-49-07: task_autodoFlow - next round
2020-12-02_01-49-07: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-49-08: handler_wasserzaehler
2020-12-02_01-49-08: handler_prevalue
2020-12-02_01-49-08: handler_wasserzaehler
2020-12-02_01-49-12: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_01-50-12: FlowControll.doFlow - ClassFlowDigit
2020-12-02_01-50-24: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_01-50-42: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_01-50-42: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_01-50-42: sent publish successful in MQTTPublish, msg_id=25906, watermeter/readout, 632.3843
2020-12-02_01-50-42: task_autodoFlow - round done
2020-12-02_01-50-42: CPU Temperature: 56.7
2020-12-02_01-53-58: task_autodoFlow - next round
2020-12-02_01-53-58: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-54-03: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_01-54-09: handler_wasserzaehler
2020-12-02_01-54-09: handler_prevalue
2020-12-02_01-54-10: handler_wasserzaehler
2020-12-02_01-55-04: FlowControll.doFlow - ClassFlowDigit
2020-12-02_01-55-15: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_01-55-33: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_01-55-33: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_01-55-33: sent publish successful in MQTTPublish, msg_id=46610, watermeter/readout, 632.3843
2020-12-02_01-55-33: task_autodoFlow - round done
2020-12-02_01-55-33: CPU Temperature: 56.7
2020-12-02_01-57-27: info_get_handler
2020-12-02_01-57-27: info_get_handler
2020-12-02_01-57-27: info_get_handler
2020-12-02_01-57-27: info_get_handler
2020-12-02_01-57-27: info_get_handler
2020-12-02_01-57-27: info_get_handler
2020-12-02_01-57-27: info_get_handler
2020-12-02_01-57-27: info_get_handler
2020-12-02_01-58-49: task_autodoFlow - next round
2020-12-02_01-58-49: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-58-54: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_01-59-54: FlowControll.doFlow - ClassFlowDigit
2020-12-02_02-00-06: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_02-00-23: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_02-00-23: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_02-00-23: sent publish successful in MQTTPublish, msg_id=26824, watermeter/readout, 632.3843
2020-12-02_02-00-23: task_autodoFlow - round done
2020-12-02_02-00-23: CPU Temperature: 56.1
2020-12-02_02-01-23: handler_ota_update
2020-12-02_02-01-23: upload_post_handler
2020-12-02_02-01-28: download_get_handler
2020-12-02_02-01-44: handler_ota_update
2020-12-02_02-01-44: upload_post_handler
2020-12-02_02-01-44: download_get_handler
2020-12-02_02-01-49: handler_ota_update
2020-12-02_02-01-57: handler_ota_update
2020-12-02_02-03-40: task_autodoFlow - next round
2020-12-02_02-03-40: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_02-03-46: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_02-04-12: handler_reboot
2020-12-02_02-04-12: Reboot - now
2020-12-02_00-04-31: Time erfolgreich ...
2020-12-02_01-04-31: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_01-04-31: ============================== Main Started =======================================
2020-12-02_01-04-33: task_autodoFlow - next round
2020-12-02_01-04-33: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-04-34: handler_wasserzaehler
2020-12-02_01-04-34: handler_wasserzaehler
2020-12-02_01-04-34: handler_prevalue
2020-12-02_01-04-39: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_01-04-44: download_get_handler
2020-12-02_01-04-44: download_get_handler
2020-12-02_01-05-32: download_get_handler
2020-12-02_01-05-40: FlowControll.doFlow - ClassFlowDigit
2020-12-02_01-05-42: delete_post_handler
2020-12-02_01-05-42: download_get_handler
2020-12-02_01-05-42: upload_post_handler
2020-12-02_01-05-43: download_get_handler
2020-12-02_01-05-45: download_get_handler
2020-12-02_01-05-45: download_get_handler
2020-12-02_01-05-52: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_01-06-09: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_01-06-09: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_01-06-09: sent publish successful in MQTTPublish, msg_id=43339, watermeter/readout, 632.3843
2020-12-02_01-06-09: task_autodoFlow - round done
2020-12-02_01-06-09: CPU Temperature: 57.2
2020-12-02_01-09-24: task_autodoFlow - next round
2020-12-02_01-09-24: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-09-30: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_01-10-30: FlowControll.doFlow - ClassFlowDigit
2020-12-02_01-10-40: download_get_handler
2020-12-02_00-10-55: Time erfolgreich ...
2020-12-02_01-10-55: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_01-10-55: ============================== Main Started =======================================
2020-12-02_01-10-57: task_autodoFlow - next round
2020-12-02_01-10-57: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-10-58: download_get_handler
2020-12-02_01-10-58: download_get_handler
2020-12-02_01-11-03: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_01-11-03: download_get_handler
2020-12-02_01-11-18: download_get_handler
2020-12-02_01-12-03: FlowControll.doFlow - ClassFlowDigit
2020-12-02_01-12-14: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_01-12-31: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_01-12-31: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_01-12-31: sent publish successful in MQTTPublish, msg_id=22268, watermeter/readout, 632.3843
2020-12-02_01-12-31: task_autodoFlow - round done
2020-12-02_01-12-31: CPU Temperature: 57.2
2020-12-02_01-12-57: download_get_handler
2020-12-02_01-12-57: download_get_handler
2020-12-02_01-13-00: handler_wasserzaehler
2020-12-02_01-13-00: handler_wasserzaehler
2020-12-02_01-13-00: handler_prevalue
2020-12-02_01-13-20: download_get_handler
2020-12-02_01-13-20: download_get_handler
2020-12-02_01-15-15: handler_wasserzaehler
2020-12-02_01-15-15: handler_prevalue
2020-12-02_01-15-15: handler_wasserzaehler
2020-12-02_01-15-23: handler_reboot
2020-12-02_01-15-23: Reboot - now
2020-12-02_00-15-41: Time erfolgreich ...
2020-12-02_01-15-41: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_01-15-41: ============================== Main Started =======================================
2020-12-02_01-15-43: task_autodoFlow - next round
2020-12-02_01-15-43: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-15-49: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_01-15-51: handler_wasserzaehler
2020-12-02_01-15-51: handler_wasserzaehler
2020-12-02_01-15-51: handler_prevalue
2020-12-02_01-15-54: download_get_handler
2020-12-02_01-15-54: download_get_handler
2020-12-02_01-16-51: FlowControll.doFlow - ClassFlowDigit
2020-12-02_01-17-01: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_01-17-19: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_01-17-19: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_01-17-19: sent publish successful in MQTTPublish, msg_id=64154, watermeter/readout, 632.3843
2020-12-02_01-17-19: task_autodoFlow - round done
2020-12-02_01-17-19: CPU Temperature: 57.2
2020-12-02_01-17-23: handler_wasserzaehler
2020-12-02_01-17-23: handler_wasserzaehler
2020-12-02_01-17-24: handler_prevalue
2020-12-02_01-17-30: download_get_handler
2020-12-02_01-17-30: download_get_handler
2020-12-02_01-17-34: handler_wasserzaehler
2020-12-02_01-17-34: handler_wasserzaehler
2020-12-02_01-17-34: handler_prevalue
2020-12-02_01-17-37: info_get_handler
2020-12-02_01-17-37: info_get_handler
2020-12-02_01-17-37: info_get_handler
2020-12-02_01-17-37: info_get_handler
2020-12-02_01-17-37: info_get_handler
2020-12-02_01-17-37: info_get_handler
2020-12-02_01-17-37: info_get_handler
2020-12-02_01-17-37: info_get_handler
2020-12-02_01-17-51: download_get_handler
2020-12-02_01-17-51: download_get_handler
2020-12-02_01-19-14: download_get_handler
2020-12-02_01-19-30: download_get_handler
2020-12-02_01-19-30: download_get_handler
2020-12-02_01-19-37: delete_post_handler
2020-12-02_01-19-37: download_get_handler
2020-12-02_01-19-38: upload_post_handler
2020-12-02_01-19-38: download_get_handler
2020-12-02_01-19-47: delete_post_handler
2020-12-02_01-19-47: download_get_handler
2020-12-02_01-19-47: upload_post_handler
2020-12-02_01-19-48: download_get_handler
2020-12-02_01-19-53: download_get_handler
2020-12-02_01-20-06: download_get_handler
2020-12-02_01-20-06: download_get_handler
2020-12-02_01-20-34: task_autodoFlow - next round
2020-12-02_01-20-34: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-20-40: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_01-21-40: FlowControll.doFlow - ClassFlowDigit
2020-12-02_01-21-51: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_01-21-54: download_get_handler
2020-12-02_01-22-01: delete_post_handler
2020-12-02_01-22-01: download_get_handler
2020-12-02_01-22-01: upload_post_handler
2020-12-02_01-22-01: download_get_handler
2020-12-02_01-22-04: download_get_handler
2020-12-02_01-22-09: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_01-22-09: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_01-22-09: sent publish successful in MQTTPublish, msg_id=11346, watermeter/readout, 632.3843
2020-12-02_01-22-09: task_autodoFlow - round done
2020-12-02_01-22-09: CPU Temperature: 56.7
2020-12-02_01-22-49: download_get_handler
2020-12-02_01-22-49: download_get_handler
2020-12-02_01-23-18: download_get_handler
2020-12-02_01-23-23: delete_post_handler
2020-12-02_01-23-23: download_get_handler
2020-12-02_01-23-24: upload_post_handler
2020-12-02_01-23-24: download_get_handler
2020-12-02_01-23-31: handler_wasserzaehler
2020-12-02_01-23-31: handler_wasserzaehler
2020-12-02_01-23-31: handler_prevalue
2020-12-02_01-23-34: download_get_handler
2020-12-02_01-23-34: download_get_handler
2020-12-02_01-23-45: download_get_handler
2020-12-02_01-23-59: delete_post_handler
2020-12-02_01-23-59: download_get_handler
2020-12-02_01-23-59: upload_post_handler
2020-12-02_01-23-59: download_get_handler
2020-12-02_01-24-01: download_get_handler
2020-12-02_01-24-01: download_get_handler
2020-12-02_01-24-52: download_get_handler
2020-12-02_01-25-25: task_autodoFlow - next round
2020-12-02_01-25-25: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-25-31: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_01-25-53: delete_post_handler
2020-12-02_01-25-54: download_get_handler
2020-12-02_01-25-54: upload_post_handler
2020-12-02_01-25-55: download_get_handler
2020-12-02_01-25-58: download_get_handler
2020-12-02_01-25-58: download_get_handler
2020-12-02_01-26-32: FlowControll.doFlow - ClassFlowDigit
2020-12-02_01-26-42: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_01-26-57: delete_post_handler
2020-12-02_01-26-57: download_get_handler
2020-12-02_01-26-57: upload_post_handler
2020-12-02_01-26-57: download_get_handler
2020-12-02_01-27-00: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_01-27-00: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_01-27-00: sent publish successful in MQTTPublish, msg_id=50077, watermeter/readout, 632.3843
2020-12-02_01-27-00: task_autodoFlow - round done
2020-12-02_01-27-00: CPU Temperature: 56.7
2020-12-02_01-27-04: download_get_handler
2020-12-02_01-27-17: delete_post_handler
2020-12-02_01-27-18: download_get_handler
2020-12-02_01-27-18: upload_post_handler
2020-12-02_01-27-18: download_get_handler
2020-12-02_01-27-21: download_get_handler
2020-12-02_01-27-21: download_get_handler
2020-12-02_01-28-05: download_get_handler
2020-12-02_01-28-05: download_get_handler
2020-12-02_01-28-17: download_get_handler
2020-12-02_01-28-29: delete_post_handler
2020-12-02_01-28-29: download_get_handler
2020-12-02_01-28-29: upload_post_handler
2020-12-02_01-28-30: download_get_handler
2020-12-02_01-28-37: download_get_handler
2020-12-02_01-28-37: download_get_handler
2020-12-02_01-29-20: handler_reboot
2020-12-02_01-29-20: Reboot - now
2020-12-02_00-29-42: Time erfolgreich ...
2020-12-02_01-29-42: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_01-29-42: ============================== Main Started =======================================
2020-12-02_01-29-44: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_01-29-44: task_autodoFlow - next round
2020-12-02_01-29-44: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-29-50: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_01-30-35: handler_wasserzaehler
2020-12-02_01-30-35: handler_prevalue
2020-12-02_01-30-35: handler_wasserzaehler
2020-12-02_01-30-48: info_get_handler
2020-12-02_01-30-48: info_get_handler
2020-12-02_01-30-48: info_get_handler
2020-12-02_01-30-48: info_get_handler
2020-12-02_01-30-48: info_get_handler
2020-12-02_01-30-48: info_get_handler
2020-12-02_01-30-48: info_get_handler
2020-12-02_01-30-48: info_get_handler
2020-12-02_01-31-00: download_get_handler
2020-12-02_01-31-00: download_get_handler
2020-12-02_01-31-20: handler_wasserzaehler
2020-12-02_01-31-20: handler_wasserzaehler
2020-12-02_01-31-20: handler_prevalue
2020-12-02_01-31-23: download_get_handler
2020-12-02_01-31-28: download_get_handler
2020-12-02_01-32-01: handler_wasserzaehler
2020-12-02_01-32-01: handler_prevalue
2020-12-02_01-32-01: handler_wasserzaehler
2020-12-02_01-33-54: handler_wasserzaehler
2020-12-02_01-33-54: handler_wasserzaehler
2020-12-02_01-33-54: handler_prevalue
2020-12-02_01-34-28: download_get_handler
2020-12-02_01-34-30: download_get_handler
2020-12-02_01-37-29: handler_wasserzaehler
2020-12-02_01-37-29: handler_prevalue
2020-12-02_01-37-29: handler_wasserzaehler
2020-12-02_01-37-32: handler_wasserzaehler
2020-12-02_01-37-32: handler_wasserzaehler
2020-12-02_01-37-32: handler_prevalue
2020-12-02_01-37-52: download_get_handler
2020-12-02_01-37-52: download_get_handler
2020-12-02_01-37-57: download_get_handler
2020-12-02_01-38-55: delete_post_handler
2020-12-02_01-38-55: download_get_handler
2020-12-02_01-38-56: upload_post_handler
2020-12-02_01-38-56: download_get_handler
2020-12-02_01-38-58: handler_reboot
2020-12-02_01-38-58: Reboot - now
2020-12-02_00-39-15: Time erfolgreich ...
2020-12-02_01-39-15: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_01-39-15: ============================== Main Started =======================================
2020-12-02_01-39-18: task_autodoFlow - next round
2020-12-02_01-39-18: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-39-23: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_01-39-25: handler_wasserzaehler
2020-12-02_01-39-25: handler_prevalue
2020-12-02_01-39-25: handler_wasserzaehler
2020-12-02_01-39-31: download_get_handler
2020-12-02_01-39-33: download_get_handler
2020-12-02_01-39-57: download_get_handler
2020-12-02_01-39-57: download_get_handler
2020-12-02_01-40-05: handler_wasserzaehler
2020-12-02_01-40-05: handler_wasserzaehler
2020-12-02_01-40-05: handler_prevalue
2020-12-02_01-40-24: FlowControll.doFlow - ClassFlowDigit
2020-12-02_01-40-27: download_get_handler
2020-12-02_01-40-30: download_get_handler
2020-12-02_01-40-36: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_01-40-53: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_01-40-53: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_01-40-53: sent publish successful in MQTTPublish, msg_id=39449, watermeter/readout, 632.3843
2020-12-02_01-40-53: task_autodoFlow - round done
2020-12-02_01-40-53: CPU Temperature: 56.7
2020-12-02_01-41-24: handler_wasserzaehler
2020-12-02_01-41-24: handler_wasserzaehler
2020-12-02_01-41-24: handler_prevalue
2020-12-02_01-41-38: download_get_handler
2020-12-02_01-41-38: download_get_handler
2020-12-02_01-41-42: download_get_handler
2020-12-02_01-42-07: download_get_handler
2020-12-02_01-42-07: download_get_handler
2020-12-02_01-43-39: delete_post_handler
2020-12-02_01-43-39: download_get_handler
2020-12-02_01-43-39: upload_post_handler
2020-12-02_01-43-39: download_get_handler
2020-12-02_01-43-41: handler_reboot
2020-12-02_01-43-41: Reboot - now
2020-12-02_00-44-00: Time erfolgreich ...
2020-12-02_01-44-00: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_01-44-00: ============================== Main Started =======================================
2020-12-02_01-44-02: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_01-44-02: task_autodoFlow - next round
2020-12-02_01-44-02: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-44-07: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_00-50-46: Time erfolgreich ...
2020-12-02_01-50-47: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_01-50-47: ============================== Main Started =======================================
2020-12-02_01-50-49: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_01-50-49: task_autodoFlow - next round
2020-12-02_01-50-49: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-50-52: handler_wasserzaehler
2020-12-02_01-50-52: handler_wasserzaehler
2020-12-02_01-50-52: handler_prevalue
2020-12-02_01-50-55: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_01-51-06: download_get_handler
2020-12-02_01-51-11: download_get_handler
2020-12-02_01-51-43: handler_wasserzaehler
2020-12-02_01-51-43: handler_wasserzaehler
2020-12-02_01-51-43: handler_prevalue
2020-12-02_01-51-55: FlowControll.doFlow - ClassFlowDigit
2020-12-02_01-52-01: download_get_handler
2020-12-02_01-52-04: download_get_handler
2020-12-02_00-52-17: Time erfolgreich ...
2020-12-02_01-52-17: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_01-52-17: ============================== Main Started =======================================
2020-12-02_01-52-19: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_01-52-19: task_autodoFlow - next round
2020-12-02_01-52-19: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-52-25: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_00-53-40: Time erfolgreich ...
2020-12-02_01-53-40: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_01-53-41: ============================== Main Started =======================================
2020-12-02_01-53-43: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_01-53-43: task_autodoFlow - next round
2020-12-02_01-53-43: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-53-48: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_00-54-30: Time erfolgreich ...
2020-12-02_01-54-30: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_01-54-30: ============================== Main Started =======================================
2020-12-02_01-54-32: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_01-54-32: task_autodoFlow - next round
2020-12-02_01-54-32: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_01-55-08: handler_wasserzaehler
2020-12-02_01-55-08: handler_wasserzaehler
2020-12-02_01-55-08: handler_prevalue
2020-12-02_01-55-15: download_get_handler
2020-12-02_01-55-15: download_get_handler
2020-12-02_01-55-33: handler_wasserzaehler
2020-12-02_01-55-33: handler_wasserzaehler
2020-12-02_01-55-33: handler_prevalue
2020-12-02_01-55-52: handler_wasserzaehler
2020-12-02_01-55-52: handler_wasserzaehler
2020-12-02_01-55-52: handler_prevalue
2020-12-02_01-56-07: handler_wasserzaehler
2020-12-02_01-56-30: handler_wasserzaehler
2020-12-02_01-56-30: handler_wasserzaehler
2020-12-02_01-56-30: handler_prevalue
2020-12-02_01-56-39: download_get_handler
2020-12-02_01-56-42: download_get_handler
2020-12-02_01-57-27: handler_wasserzaehler
2020-12-02_01-57-27: handler_wasserzaehler
2020-12-02_01-57-27: handler_prevalue
2020-12-02_01-57-36: download_get_handler
2020-12-02_01-57-39: download_get_handler
2020-12-02_01-57-51: handler_wasserzaehler
2020-12-02_01-57-51: handler_wasserzaehler
2020-12-02_01-57-51: handler_prevalue
2020-12-02_01-57-56: download_get_handler
2020-12-02_01-57-59: download_get_handler
2020-12-02_01-58-42: handler_wasserzaehler
2020-12-02_01-58-42: handler_wasserzaehler
2020-12-02_01-58-42: handler_prevalue
2020-12-02_01-59-19: handler_wasserzaehler
2020-12-02_01-59-19: handler_wasserzaehler
2020-12-02_01-59-19: handler_prevalue
2020-12-02_01-59-28: handler_wasserzaehler
2020-12-02_01-59-28: handler_wasserzaehler
2020-12-02_01-59-28: handler_prevalue
2020-12-02_01-59-34: download_get_handler
2020-12-02_01-59-36: download_get_handler
2020-12-02_01-59-47: download_get_handler
2020-12-02_01-59-47: download_get_handler
2020-12-02_01-59-56: download_get_handler
2020-12-02_02-00-38: delete_post_handler
2020-12-02_02-00-38: download_get_handler
2020-12-02_02-00-38: upload_post_handler
2020-12-02_02-00-38: download_get_handler
2020-12-02_02-00-41: handler_reboot
2020-12-02_02-00-41: Reboot - now
2020-12-02_01-00-59: Time erfolgreich ...
2020-12-02_02-00-59: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_02-00-59: ============================== Main Started =======================================
2020-12-02_02-01-01: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_02-01-01: task_autodoFlow - next round
2020-12-02_02-01-01: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_02-01-05: handler_wasserzaehler
2020-12-02_02-01-05: handler_wasserzaehler
2020-12-02_02-01-05: handler_prevalue
2020-12-02_02-01-06: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_02-01-14: handler_wasserzaehler
2020-12-02_02-01-14: handler_wasserzaehler
2020-12-02_02-01-14: handler_prevalue
2020-12-02_02-01-22: download_get_handler
2020-12-02_02-01-24: download_get_handler
2020-12-02_02-01-51: download_get_handler
2020-12-02_02-01-52: download_get_handler
2020-12-02_02-02-07: FlowControll.doFlow - ClassFlowDigit
2020-12-02_02-02-11: handler_wasserzaehler
2020-12-02_02-02-11: handler_wasserzaehler
2020-12-02_02-02-12: handler_prevalue
2020-12-02_02-02-18: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_02-02-31: handler_wasserzaehler
2020-12-02_01-02-47: Time erfolgreich ...
2020-12-02_02-02-47: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_02-02-47: ============================== Main Started =======================================
2020-12-02_02-02-49: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_02-02-49: task_autodoFlow - next round
2020-12-02_02-02-49: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_02-02-55: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_02-02-56: handler_wasserzaehler
2020-12-02_02-02-56: handler_wasserzaehler
2020-12-02_02-02-56: handler_prevalue
2020-12-02_02-03-55: FlowControll.doFlow - ClassFlowDigit
2020-12-02_02-04-02: handler_wasserzaehler
2020-12-02_02-04-02: handler_wasserzaehler
2020-12-02_02-04-02: handler_prevalue
2020-12-02_02-04-07: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_02-04-09: handler_wasserzaehler
2020-12-02_02-04-09: handler_wasserzaehler
2020-12-02_02-04-09: handler_prevalue
2020-12-02_02-04-24: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_02-04-24: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_02-04-24: sent publish successful in MQTTPublish, msg_id=53848, watermeter/readout, 632.3843
2020-12-02_02-04-24: task_autodoFlow - round done
2020-12-02_02-04-24: CPU Temperature: 57.8
2020-12-02_02-05-59: handler_wasserzaehler
2020-12-02_02-05-59: handler_wasserzaehler
2020-12-02_02-05-59: handler_prevalue
2020-12-02_02-07-40: task_autodoFlow - next round
2020-12-02_02-07-40: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_02-07-46: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_02-07-52: handler_wasserzaehler
2020-12-02_02-07-52: handler_wasserzaehler
2020-12-02_02-07-52: handler_prevalue
2020-12-02_02-09-30: handler_wasserzaehler
2020-12-02_02-09-30: handler_wasserzaehler
2020-12-02_02-09-30: handler_prevalue
2020-12-02_02-09-44: download_get_handler
2020-12-02_02-09-45: download_get_handler
2020-12-02_02-09-51: download_get_handler
2020-12-02_02-09-51: download_get_handler
2020-12-02_02-09-54: download_get_handler
2020-12-02_02-09-54: download_get_handler
2020-12-02_02-10-05: download_get_handler
2020-12-02_02-10-05: download_get_handler
2020-12-02_02-10-07: download_get_handler
2020-12-02_02-10-08: download_get_handler
2020-12-02_02-10-14: download_get_handler
2020-12-02_02-10-20: download_get_handler
2020-12-02_02-10-20: download_get_handler
2020-12-02_02-10-21: download_get_handler
2020-12-02_02-10-22: download_get_handler
2020-12-02_02-10-24: download_get_handler
2020-12-02_02-10-24: download_get_handler
2020-12-02_02-10-25: download_get_handler
2020-12-02_02-10-26: download_get_handler
2020-12-02_02-10-38: download_get_handler
2020-12-02_02-10-38: download_get_handler
2020-12-02_02-10-43: download_get_handler
2020-12-02_02-10-44: download_get_handler
2020-12-02_02-10-47: download_get_handler
2020-12-02_02-10-54: handler_wasserzaehler
2020-12-02_02-10-54: handler_wasserzaehler
2020-12-02_02-10-54: handler_prevalue
2020-12-02_02-10-56: download_get_handler
2020-12-02_02-10-56: download_get_handler
2020-12-02_02-10-59: download_get_handler
2020-12-02_02-10-59: download_get_handler
2020-12-02_02-11-04: download_get_handler
2020-12-02_02-11-05: download_get_handler
2020-12-02_02-11-08: download_get_handler
2020-12-02_02-11-08: download_get_handler
2020-12-02_02-11-10: download_get_handler
2020-12-02_02-11-10: download_get_handler
2020-12-02_02-11-21: download_get_handler
2020-12-02_02-11-53: handler_wasserzaehler
2020-12-02_02-11-53: handler_wasserzaehler
2020-12-02_02-11-53: handler_prevalue
2020-12-02_02-12-20: FlowControll.doFlow - ClassFlowDigit
2020-12-02_02-12-20: ClassFlowDigit::doAlignAndCut not okay!
2020-12-02_02-12-20: Fehler im vorheriger Schritt - wird zum 1. Mal wiederholt
2020-12-02_02-12-20: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_02-12-26: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_02-13-27: FlowControll.doFlow - ClassFlowDigit
2020-12-02_02-13-36: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_02-13-54: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_02-13-54: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_02-13-54: sent publish successful in MQTTPublish, msg_id=6921, watermeter/readout, 632.3843
2020-12-02_02-13-54: task_autodoFlow - round done
2020-12-02_02-13-54: CPU Temperature: 57.8
2020-12-02_02-16-53: handler_wasserzaehler
2020-12-02_02-16-53: handler_prevalue
2020-12-02_02-16-53: handler_wasserzaehler
2020-12-02_02-17-43: handler_wasserzaehler
2020-12-02_02-17-43: handler_wasserzaehler
2020-12-02_02-17-43: handler_prevalue
2020-12-02_02-22-34: handler_wasserzaehler
2020-12-02_02-22-34: handler_wasserzaehler
2020-12-02_02-22-34: handler_prevalue
2020-12-02_02-22-39: download_get_handler
2020-12-02_02-22-41: download_get_handler
2020-12-02_02-23-56: download_get_handler
2020-12-02_02-23-56: download_get_handler
2020-12-02_02-24-01: download_get_handler
2020-12-02_02-24-30: delete_post_handler
2020-12-02_02-24-31: download_get_handler
2020-12-02_02-24-31: upload_post_handler
2020-12-02_02-24-31: download_get_handler
2020-12-02_02-24-33: handler_reboot
2020-12-02_02-24-33: Reboot - now
2020-12-02_01-24-53: Time erfolgreich ...
2020-12-02_02-24-53: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_02-24-53: ============================== Main Started =======================================
2020-12-02_02-24-55: task_autodoFlow - next round
2020-12-02_02-24-55: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_02-25-00: handler_editflow
2020-12-02_02-25-01: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_02-25-15: handler_editflow
2020-12-02_02-25-39: handler_wasserzaehler
2020-12-02_02-25-39: handler_wasserzaehler
2020-12-02_02-25-39: handler_prevalue
2020-12-02_02-25-45: download_get_handler
2020-12-02_02-25-47: download_get_handler
2020-12-02_02-26-04: FlowControll.doFlow - ClassFlowDigit
2020-12-02_02-26-13: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_02-26-23: handler_wasserzaehler
2020-12-02_02-26-23: handler_wasserzaehler
2020-12-02_02-26-23: handler_prevalue
2020-12-02_01-26-37: Time erfolgreich ...
2020-12-02_02-26-37: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_02-26-37: ============================== Main Started =======================================
2020-12-02_02-26-39: task_autodoFlow - next round
2020-12-02_02-26-39: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_02-26-40: download_get_handler
2020-12-02_02-26-40: download_get_handler
2020-12-02_02-26-45: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_02-27-01: handler_wasserzaehler
2020-12-02_02-27-01: handler_wasserzaehler
2020-12-02_02-27-01: handler_prevalue
2020-12-02_02-27-18: handler_wasserzaehler
2020-12-02_02-27-18: handler_wasserzaehler
2020-12-02_02-27-18: handler_prevalue
2020-12-02_02-27-46: FlowControll.doFlow - ClassFlowDigit
2020-12-02_02-27-51: download_get_handler
2020-12-02_02-27-53: download_get_handler
2020-12-02_01-28-10: Time erfolgreich ...
2020-12-02_02-28-10: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_02-28-10: ============================== Main Started =======================================
2020-12-02_02-28-13: task_autodoFlow - next round
2020-12-02_02-28-13: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_02-28-18: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_02-28-30: handler_ota_update
2020-12-02_02-29-18: handler_ota_update
2020-12-02_02-29-18: upload_post_handler
2020-12-02_02-29-25: download_get_handler
2020-12-02_02-29-25: FlowControll.doFlow - ClassFlowDigit
2020-12-02_02-29-35: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_02-29-38: handler_ota_update
2020-12-02_02-29-39: upload_post_handler
2020-12-02_02-29-41: download_get_handler
2020-12-02_02-29-47: handler_ota_update
2020-12-02_01-30-05: Time erfolgreich ...
2020-12-02_02-30-05: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2020-12-02_02-30-05: ============================== Main Started =======================================
2020-12-02_02-30-07: task_autodoFlow - next round
2020-12-02_02-30-07: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_02-30-12: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_02-30-30: handler_ota_update
2020-12-02_02-30-30: upload_post_handler
2020-12-02_02-30-36: download_get_handler
2020-12-02_02-30-41: handler_ota_update
2020-12-02_02-31-24: handler_ota_update
2020-12-02_02-31-25: upload_post_handler
2020-12-02_02-31-28: download_get_handler
2020-12-02_02-31-32: handler_ota_update
2020-12-02_02-31-40: handler_reboot
2020-12-02_02-31-40: Reboot - now
2020-12-02_03-32-01: ============================== Main Started =======================================
2020-12-02_03-32-03: task_autodoFlow - next round
2020-12-02_03-32-03: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_03-32-09: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_03-33-09: FlowControll.doFlow - ClassFlowDigit
2020-12-02_03-33-13: handler_wasserzaehler
2020-12-02_03-33-13: handler_wasserzaehler
2020-12-02_03-33-13: handler_prevalue
2020-12-02_03-33-17: info_get_handler
2020-12-02_03-33-17: info_get_handler
2020-12-02_03-33-17: info_get_handler
2020-12-02_03-33-17: info_get_handler
2020-12-02_03-33-17: info_get_handler
2020-12-02_03-33-17: info_get_handler
2020-12-02_03-33-17: info_get_handler
2020-12-02_03-33-17: info_get_handler
2020-12-02_03-33-30: ============================== Main Started =======================================
2020-12-02_03-33-33: task_autodoFlow - next round
2020-12-02_03-33-33: FlowControll.doFlow - ClassFlowMakeImage
2020-12-02_03-33-33: download_get_handler
2020-12-02_03-33-38: FlowControll.doFlow - ClassFlowAlignment
2020-12-02_03-33-52: handler_wasserzaehler
2020-12-02_03-33-52: handler_wasserzaehler
2020-12-02_03-33-53: handler_prevalue
2020-12-02_03-34-15: download_get_handler
2020-12-02_03-34-16: download_get_handler
2020-12-02_03-34-38: FlowControll.doFlow - ClassFlowDigit
2020-12-02_03-34-48: FlowControll.doFlow - ClassFlowAnalog
2020-12-02_03-34-52: handler_wasserzaehler
2020-12-02_03-34-53: handler_wasserzaehler
2020-12-02_03-34-53: handler_prevalue
2020-12-02_03-35-01: download_get_handler
2020-12-02_03-35-03: download_get_handler
2020-12-02_03-35-07: FlowControll.doFlow - ClassFlowPostProcessing
2020-12-02_03-35-07: FlowControll.doFlow - ClassFlowMQTT
2020-12-02_03-35-07: sent publish successful in MQTTPublish, msg_id=62689, watermeter/readout, 632.3843
2020-12-02_03-35-07: task_autodoFlow - round done
2020-12-02_03-35-07: CPU Temperature: 58.9
2020-12-02_03-35-31: handler_wasserzaehler
2020-12-02_03-35-31: handler_wasserzaehler
2020-12-02_03-35-31: handler_prevalue
2020-12-02_03-35-37: download_get_handler
2020-12-02_03-35-40: download_get_handler

I found the error for this unstable behavious. It was a changed setting in the internal FAT file system. In general it improves the behaviour, here it got worst - at first.
Rolling and master have been updated - please test!

[jomjol]

@Jezinka @watcherkb @MichMein
In der neuen Version (ab v4.1.0) werden keine Kommas in der Config.ini empfohlen. Mometan geht es aber mit und ohne Komma. Erst in einer späteren Version, muss ich dann die Kompatilität der beiden Versionen aufgeben. Momentan habe ich aber über einen Workaround beide Optionen möglich, damit der Übergang besser läuft.
Gruß,
jomjol

[Jezinka]

@jomjol File does not exist
Ich habe die Master-Version der Firmware- und HTML-Dateien verwendet. Nach dem Neustart startet es nicht Es ist wieder eine Meldung
Grüße Jirka

[Jezinka]

Der Zugriff auf esp32 ist nicht mehr möglich. Ich werde versuchen, mit TTL zu zerlegen und erneut zu blinken. Alles von 0. Dann aktualisiere ich diesen Beitrag.

Aktualisierung:
Ich habe alles wieder mit TTL hochgeladen. Alles begann zu funktionieren, bis ich meine Konfigurationsdatei hochgeladen hatte. Dies bedeutet, dass etwas mit meiner Konfiguration nicht stimmt und die oben genannten Probleme verursacht. Ich hänge meine Konfiguration an. Vielleicht hilft es, einen Fehler zu finden und die Fehlfunktion in der neuen Version mit derselben Konfiguration zu beheben.
Grüße Jirka

[MakeImage]
;LogImageLocation = /log/source
WaitBeforeTakingPicture = 5
ImageQuality = 5
ImageSize = VGA

[Alignment]
InitialRotate = -94
/config/ref0.jpg 146 154
/config/ref1.jpg 418 48
SearchFieldX = 20
SearchFieldY = 20


[Digits]
Model = /config/dig0650s3.tflite
LogImageLocation = /log/digit
ModelInputSize = 20 32
digit1 275 58 34 55
digit2 326 58 34 55
digit3 378 57 34 55

[Analog]
Model = /config/ana0630s2.tflite
LogImageLocation = /log/analog
ModelInputSize = 32 32
analog1 431 127 108 108
analog2 393 251 106 106
analog3 278 301 103 103
analog4 163 256 101 101

[PostProcessing]
DecimalShift = 0
PreValueUse = true
PreValueAgeStartup = 30
AllowNegativeRates = false
MaxRateValue = 0.1
ErrorMessage = true
CheckDigitIncreaseConsistency = true

[MQTT]
Uri = mqtt://192.168.10.45:1883
Topic = watermeter/readout
TopicError = watermeter/error
ClientID = wasser
user = mqttuser
password = mqttpassword

[AutoTimer]
AutoStart = true
Intervall = 4.85

[Debug]
Logfile = true
LogfileRetentionInDays = 10

[System]
TimeZone = CET-1CEST,M3.5.0,M10.5.0/3
TimeUpdateIntervall = 24

[Ende]

Ich vermute, dass diese Einstellung das nicht tut. Der Wert der ursprünglichen Konfiguration unterscheidet sich von der neuen.
[Digits]
Model = /config/dig0720s1.tflite

Es wird also wahrscheinlich etwas anderes sein, vielleicht Logos aktivieren oder Bilder schreiben.
Jetzt wird es immer wieder neu gestartet.

Aktualisierung 2 :

Also habe ich getestet und es bewirkt, dass die Bilder auf der Karte gespeichert werden. Analog, Digital und Bild. Es ist notwendig, dass LogImage alle 3 kommentiert. Dann funktioniert es. Ich habe auch versucht, die Karten zu wechseln und jetzt arbeite ich an Samsung 32 GB und es geht gut. Zumindest für jetzt. Ich beende heute, ich bin KO.

[watcherkb]

@jomjol
irgendwie passt bei mir noch nicht richtig. Raw-Value sieht richtig aus, Corrected und Checked Value aber nicht.

Meine Settings:

[MakeImage]
LogImageLocation = /log/source
LogfileRetentionInDays = 15
WaitBeforeTakingPicture=5
ImageQuality = 5
ImageSize = VGA

[Alignment]
InitialMirror = True
InitialRotate = 180
/config/ref0.jpg 44, 45
/config/ref1.jpg 301, 209
SearchFieldX = 20
SearchFieldY = 20


[Digits]
Model=/config/dig0650s3.tflite
LogImageLocation = /log/digit
LogfileRetentionInDays = 15
ModelInputSize 20, 32
digit1, 14, 117, 44, 73
digit2, 87, 117, 44, 73
digit3, 167, 117, 44, 73
digit4, 244, 117, 44, 73
digit5, 319, 117, 44, 73
digit6, 396, 117, 44, 73
digit7, 473, 117, 44, 73
digit8, 563, 117, 44, 73

;[Analog]
;Model=/config/ana0630s2.tflite
;LogImageLocation = /log/analog
;LogfileRetentionInDays = 15
;ModelInputSize 32, 32

[PostProcessing]
DecimalShift = -3
PreValueUse = True
PreValueAgeStartup = 1440
AllowNegativeRates = False
MaxRateValue = 0.8
ErrorMessage = True
CheckDigitIncreaseConsistency = True

[MQTT]
Uri = mqtt://192.168.1.11:1883
Topic = gasmeter/readoutHWR
ClientID = gas
;user = xxx
;password = xxx

[AutoTimer]
AutoStart= True
Intervall = 4.85
;Intervall = 60

[Debug]
Logfile = True
; Number of days before a log file is deleted. 0 = disabled. 10 is default value (if not defined)
LogfileRetentionInDays = 10

[Ende]

[MichMein]

@watcherkb hi, hast du es mal mit „set prevalue“ probiert dies auf einen Wert sehr nah an dem tatsächlichen. Nur so als Idee.

[watcherkb]

@MichMein ja schon mehrmals

[MichMein]

@watcherkb hmm, das ist doof. Läuft denn laut log (am besten debug log) alles soweit durch?

[pfried]

@watcherkb Du hast MQTT nur halb ausmaskiert.....

[watcherkb]

@pfried ja user und passwort brauch ich nicht.

@MichMein
kannst du was erkennen?

new 1.txt

[MichMein]

@watcherkb sagte in Wasserzähler - Version 2 - all-in-device:

@MichMein
kannst du was erkennen?

Hi, wenn ich ehrlich sieht es erstmal ganz gut aus. Ich für meinen Teil kann nichts erkennen was komisch ist, du hast allerdings ein paar Male recht hohe Sprünge in den Werten. Ich nehme an da hast du das prevalue gesetzt.

Ich hatte anfangs etwas Probleme mit dem Gaszähler bezüglich der letzten Stelle, da dort die Wahrscheinlichkeit sehr hoch ist das ein Bild dann erzeugt wird wenn die Zahl nicht korrekt erkannt werden kann.

Teste doch mal das letzte digit zu löschen und ändere den dezimalshift dann auch.

Ansonsten bin ich ratlos, vielleicht hat @jomjol noch ne zündende Idee

Gruß und ein schönes Wochenende
Michael

[jomjol]

@MichMein @watcherkb
Ich habe gerade mal bei meinem Zähler mit dem DecimalShift rumgespielt. Konnte den Fehler aber leider nicht reproduzieren. Einziger Unterschied ist, dass ich noch analoge Zeiger drin habe. Ich kann die mal löschen und dann schauen, ob es noch einen Fehler im Algo gibt.
Melde mich dazu wieder

[watcherkb]

@jomjol @MichMein teilweise habe ich noch Fehler bei der Erkennung der digits, warte aber noch bis ich genug zusammen habe zum anlernen. Deswegen auch das häufige manuelle prevalue setzen.

@MichMein gute Idee, den letzten digit brauche ich theoretisch nicht.

Danke euch für die Bemühungen.