Lichtschalter und iobroker und manuelles auslösen
-
@CrunkFX Ich sehe gerade du musst das bleue element austauschen gegen "devices"
-
-
-
@Ente Injizieren Klicken
dann array öffnen 
-
@CrunkFX Wir müssen nur deine Device ID´s rausfinden der rest wird einfach
-
-
@Ente Damit hätten wir jetzt die device id vom Bad. Soll der Wert nur in VIS angezeigt werden oder schaltbar sein?
-
Bitte schaltbar.
-
@Ente OK das müssen wir ausprobieren, da ich leider meine Sonoff geräte geflasht hab und das so nich nachmachen kann. Kannst du im IOB Objekt Browser unter userdata.0 ein neuen Datenpunkt anlegen als Logikwert
-
-
@Ente OK importier mal diesen Flow:
[ { "id": "95fe1d43.5b40e", "type": "ioBroker in", "z": "816d1036.bc2a78", "name": "", "topic": "0_userdata.0.example_state.test", "payloadType": "value", "onlyack": "", "func": "rbe", "gap": "", "fireOnStart": "false", "x": 370, "y": 340, "wires": [ [ "33ce8287.5bc756" ] ] }, { "id": "32a2cf7a.f26bd", "type": "ioBroker out", "z": "816d1036.bc2a78", "name": "", "topic": "0_userdata.0.example_state.test", "ack": "false", "autoCreate": "false", "stateName": "", "role": "", "payloadType": "", "readonly": "", "stateUnit": "", "stateMin": "", "stateMax": "", "x": 1010, "y": 400, "wires": [] }, { "id": "11450bfd.8107c4", "type": "ewelink-power-state-read", "z": "816d1036.bc2a78", "name": "", "deviceId": "1000519e49", "channel": 1, "auth": "", "x": 500, "y": 400, "wires": [ [ "c1a8c003.a50b8" ] ] }, { "id": "dc47e9fb.4654", "type": "ewelink-power-state-write", "z": "816d1036.bc2a78", "name": "", "deviceId": "1000519e49", "channel": 1, "auth": "", "x": 960, "y": 340, "wires": [ [] ] }, { "id": "18482006.cffd8", "type": "inject", "z": "816d1036.bc2a78", "name": "", "topic": "", "payload": " ", "payloadType": "str", "repeat": "1", "crontab": "", "once": false, "onceDelay": 0.1, "x": 310, "y": 400, "wires": [ [ "11450bfd.8107c4" ] ] }, { "id": "33ce8287.5bc756", "type": "change", "z": "816d1036.bc2a78", "name": "", "rules": [ { "t": "change", "p": "payload", "pt": "msg", "from": "true", "fromt": "str", "to": "on", "tot": "str" }, { "t": "change", "p": "payload", "pt": "msg", "from": "false", "fromt": "str", "to": "off", "tot": "str" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 640, "y": 340, "wires": [ [ "dc47e9fb.4654" ] ] }, { "id": "c1a8c003.a50b8", "type": "change", "z": "816d1036.bc2a78", "name": "", "rules": [ { "t": "change", "p": "payload", "pt": "msg", "from": "on", "fromt": "str", "to": "true", "tot": "str" }, { "t": "change", "p": "payload", "pt": "msg", "from": "off", "fromt": "str", "to": "false", "tot": "str" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 740, "y": 400, "wires": [ [ "32a2cf7a.f26bd" ] ] } ]In den beiden userdata nodes muss test groß geschrieben werden also "Test"
-
-
@Ente Wenn du test gegen Test getauscht hast kannst du das ja mal testen. Werte auslesen und schalten in einem Datenpunkt ist in Nodered sehr kompliziert. evtl. lösen wir das gleich anders
-
Und deployed ist es auch.
-
@Ente OK ich sehe gerade in der API das da kein string rauskommt sonder ein json element. Das muss gesondert behandelt werden.
-
@Ente Also nachmal:
[{"id":"eeaafec1.64e1c8","type":"ioBroker in","z":"816d1036.bc2a78","name":"","topic":"0_userdata.0.example_state.Test","payloadType":"value","onlyack":"","func":"rbe","gap":"","fireOnStart":"false","x":550,"y":260,"wires":[["a0eca12f.40b61"]]},{"id":"1ee747f3.f1012","type":"ioBroker out","z":"816d1036.bc2a78","name":"","topic":"0_userdata.0.example_state.Test","ack":"false","autoCreate":"false","stateName":"","role":"","payloadType":"","readonly":"","stateUnit":"","stateMin":"","stateMax":"","x":1320,"y":320,"wires":[]},{"id":"8ee7ecff.83d5a8","type":"ewelink-power-state-read","z":"816d1036.bc2a78","name":"","deviceId":"1000519e49","channel":1,"auth":"","x":680,"y":320,"wires":[["884e67c2.8507a8"]]},{"id":"75ded6ec.b0fc7","type":"ewelink-power-state-write","z":"816d1036.bc2a78","name":"","deviceId":"1000519e49","channel":1,"auth":"","x":1300,"y":260,"wires":[[]]},{"id":"6789feab.7e625","type":"inject","z":"816d1036.bc2a78","name":"","topic":"","payload":" ","payloadType":"str","repeat":"1","crontab":"","once":false,"onceDelay":0.1,"x":490,"y":320,"wires":[["8ee7ecff.83d5a8"]]},{"id":"884e67c2.8507a8","type":"switch","z":"816d1036.bc2a78","name":"","property":"payload","propertyType":"msg","rules":[{"t":"cont","v":"on","vt":"str"},{"t":"cont","v":"off","vt":"str"}],"checkall":"true","repair":false,"outputs":2,"x":870,"y":320,"wires":[["60c17500.006144"],["c79b99e8.9954a"]]},{"id":"60c17500.006144","type":"change","z":"816d1036.bc2a78","name":"","rules":[{"t":"set","p":"payload","pt":"msg","to":"true","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":1050,"y":300,"wires":[["1ee747f3.f1012"]]},{"id":"c79b99e8.9954a","type":"change","z":"816d1036.bc2a78","name":"","rules":[{"t":"set","p":"payload","pt":"msg","to":"false","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":1050,"y":340,"wires":[["1ee747f3.f1012"]]},{"id":"a0eca12f.40b61","type":"change","z":"816d1036.bc2a78","name":"","rules":[{"t":"change","p":"payload","pt":"msg","from":"true","fromt":"str","to":"on","tot":"str"},{"t":"change","p":"payload","pt":"msg","from":"false","fromt":"str","to":"off","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":920,"y":260,"wires":[["75ded6ec.b0fc7"]]}] -
deployed.
-
@Ente OK passiert irgendwas? Siehst du irgendwo werte?
-
@CrunkFX
Böde Frage, wo soll ich denn die Werte sehen? Muss ich irgendwas in IOB oder vis integrieren? -
@Ente Nein wenn dort Werte rauskommen, stehen die unter dem State, bei dir hier:
