Nach Update Fehler beim Start und Putty II

IwaKim

das schaut so aus:

npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142
npm WARN lifecycle iobroker.js-controller@2.2.9~preinstall: cannot run in wd %s %s (wd=%s) iobroker.js-controller@2.2.9 node lib/preinstallCheck.js /opt/iobroker/node_modules/.staging/iobroker.js-controller-a76002ca

> unix-dgram@2.0.3 install /opt/iobroker/node_modules/unix-dgram
> node-gyp rebuild

make: Entering directory '/opt/iobroker/node_modules/unix-dgram/build'
  CXX(target) Release/obj.target/unix_dgram/src/unix_dgram.o
  SOLINK_MODULE(target) Release/obj.target/unix_dgram.node
  COPY Release/unix_dgram.node
make: Leaving directory '/opt/iobroker/node_modules/unix-dgram/build'

> ursa-optional@0.9.10 install /opt/iobroker/node_modules/ursa-optional
> node rebuild.js


> diskusage@1.1.3 install /opt/iobroker/node_modules/diskusage
> node-gyp rebuild

make: Entering directory '/opt/iobroker/node_modules/diskusage/build'
  CXX(target) Release/obj.target/diskusage/src/main.o
  CXX(target) Release/obj.target/diskusage/src/diskusage_posix.o
../src/diskusage_posix.cpp: In function 'DiskUsage GetDiskUsage(const char*)':
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member 'statvfs::f_bsize' [-Wmissing-field-initializers]
     struct statvfs info = {};
                            ^
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member 'statvfs::f_frsize' [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member 'statvfs::f_blocks' [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member 'statvfs::f_bfree' [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member 'statvfs::f_bavail' [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member 'statvfs::f_files' [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member 'statvfs::f_ffree' [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member 'statvfs::f_favail' [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member 'statvfs::f_fsid' [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member 'statvfs::f_flag' [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member 'statvfs::f_namemax' [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member 'statvfs::__f_spare' [-Wmissing-field-initializers]
  SOLINK_MODULE(target) Release/obj.target/diskusage.node
  COPY Release/diskusage.node
make: Leaving directory '/opt/iobroker/node_modules/diskusage/build'

> iobroker.js-controller@2.2.9 install /opt/iobroker/node_modules/iobroker.js-controller
> node iobroker.js setup first

/opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js:242
                        const createInitialInstances = async () => {
                                                             ^

SyntaxError: Unexpected token (
    at createScript (vm.js:56:10)
    at Object.runInThisContext (vm.js:97:10)
    at Module._compile (module.js:549:28)
    at Object.Module._extensions..js (module.js:586:10)
    at Module.load (module.js:494:32)
    at tryModuleLoad (module.js:453:12)
    at Function.Module._load (module.js:445:3)
    at Module.require (module.js:504:17)
    at require (internal/module.js:20:19)
    at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js:1:63)
iobroker@1.0.0 /opt/iobroker
`-- (empty)

npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@~2.1.2 (node_modules/chokidar/node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.1.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"})
npm ERR! Linux 3.14-1-amd64
npm ERR! argv "/usr/bin/node" "/usr/bin/npm" "install" "iobroker.js-controller"
npm ERR! node v6.17.1
npm ERR! npm  v3.10.10
npm ERR! code ELIFECYCLE

npm ERR! iobroker.js-controller@2.2.9 install: `node iobroker.js setup first`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the iobroker.js-controller@2.2.9 install script 'node iobroker.js setup first'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the iobroker.js-controller package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR!     node iobroker.js setup first
npm ERR! You can get information on how to open an issue for this project with:
npm ERR!     npm bugs iobroker.js-controller
npm ERR! Or if that isn't available, you can get their info via:
npm ERR!     npm owner ls iobroker.js-controller
npm ERR! There is likely additional logging output above.

npm ERR! Please include the following file with any support request:
npm ERR!     /opt/iobroker/npm-debug.log
npm ERR! code 1
root@jessie:/opt/iobroker

EDIT:LOG in CODE TAGS

wendy2702

Was kommt bei

node -v
npm -v

IwaKim

@wendy2702 said in Nach Update Fehler beim Start und Putty II:
root@jessie:/opt/iobroker# node -v

v6.17.1
root@jessie:/opt/iobroker# npm -v
3.10.10
root@jessie:/opt/iobroker#

wendy2702

Die Versionen sind zu alt.

Bitte updaten:

https://www.iobroker.net/#de/documentation/install/linux.md

IwaKim

das habe ich bis "Installation ioBroker" gemacht.
Jetzt schau das so aus

root@jessie:~# nodejs -v
v10.20.1
root@jessie:~# nodejs -v
v10.20.1
root@jessie:~# iobroker start
internal/modules/cjs/loader.js:638
    throw err;
    ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Function.Module._resolveFilename (internal/modules/cjs/loader.js:636:15)
    at Function.Module._load (internal/modules/cjs/loader.js:562:25)
    at Function.Module.runMain (internal/modules/cjs/loader.js:831:12)
    at startup (internal/bootstrap/node.js:283:19)
    at bootstrapNodeJSCore (internal/bootstrap/node.js:623:3)
root@jessie:~#

Soll ich dem Link auch noch weiter folgen (ab Installation ioBroker). Mache ich da nicht meine gesamte Installation kaputt?

EDIT: LOG in CODE TAGS

wendy2702

Nach update von NPM und Node musst du den JS-Controller neu installieren. Also das was du zuvor probiert hast.

Welche NPM Version ist jetzt installiert?

IwaKim

@wendy2702 said in Nach Update Fehler beim Start und Putty II:

NPM

root@jessie:~# npm -v
6.14.4
root@jessie:~#

wendy2702

@wendy2702 sagte in Nach Update Fehler beim Start und Putty II:

Probiere mal:


cd /opt/iobroker
iobroker stop
npm install iobroker.js-controller
iobroker start

Dann das erneut

IwaKim

egal was ich hinter iobroker schreibe, ich bekomme immer das:

root@jessie:~# iobroker [stop|start|update|...]
internal/modules/cjs/loader.js:638
    throw err;
    ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Function.Module._resolveFilename (internal/modules/cjs/loader.js:636:15)
    at Function.Module._load (internal/modules/cjs/loader.js:562:25)
    at Function.Module.runMain (internal/modules/cjs/loader.js:831:12)
    at startup (internal/bootstrap/node.js:283:19)
    at bootstrapNodeJSCore (internal/bootstrap/node.js:623:3)
root@jessie:~#

wendy2702

@IwaKim BITTE BENUTZE CODE TAGS ZUM POSTEN VON LOGS

cd /opt/iobroker
npm install iobroker.js-controller
iobroker start

Stop ist überflüssig weil er ja eh nicht läuft. Von update habe ich nichts geschrieben.

IwaKim

Du meinst "npm install iobroker.js-controller"?

wendy2702

Ja.

Aber bitte im richtigen Ordner!

IwaKim

dieser hier?
root@jessie:/opt/iobroker# ls
backups install.sh iobroker-data log npm-debug.log package.json
etc iobroker killall.sh node_modules package-lock.json reinstall.sh
root@jessie:/opt/iobroker#

wendy2702

Ja.

Wie bereits geschrieben.

IwaKim

Sorry, das hatte ich oberlesen!

es geht Suuuper!
root@jessie:/opt/iobroker# iobroker start
Starting iobroker controller daemon...
iobroker controller daemon started. PID: 4484
root@jessie:/opt/iobroker#
bei "npm install iobroker.js-controller" kam u.a. das
| New major version of npm available! 5.3.0 -> 6.4.1 │
│ Changelog: https://github.com/npm/cli/releases/tag/v6.4.1 │
│ Run npm install -g npm to update!
Ist das eine gute Idee?

wendy2702

@wendy2702 sagte in Nach Update Fehler beim Start und Putty II:

Die Versionen sind zu alt.

Bitte updaten:

https://www.iobroker.net/#de/documentation/install/linux.md

Hättest du das hier gelesen :point_up_2:

Wäre dir dieser Teil aufgefallen:


Als letzte Überprüfung bitte noch die Version von npm mittels npm -v überprüfen.

Ergibt dies eine Version < 6, bitte noch mit sudo -H npm install -g npm@6 ein npm-Update durchführen

Also lautet die Antwort: JA... machen, es ist eine gute Idee

IwaKim

alles super1
ein gutes Voting hast Du Dir mehr als verdient. Aber wie geht das?
Recht unter was was wie "got it". Da habe ich drauf geklickt.

wendy2702

@IwaKim

Kannst gerne Hier in den Beiträgen die geholfen haben auf den Pfeil nach oben drücken

Schön das es wieder läuft.

Schönen Sonntag

Community Forum

NEWS

Nach Update Fehler beim Start und Putty II

Support us

605

32.7k

82.5k

1.3m