FHEM Adapter

LausiD

@ralf-ms
Danke für die ausführliche Beschreibung...Blank war wohl das Problem
Kannst du mal von github aktualisieren und nochmal testen?
Vielen Dank und Gruß
LausiD

ralf-ms

Hallo LausiD,

löppt!
Vielen Dank für die schnelle Lösung!!!

Grüße
Ralf

LausiD

@ralf-ms
Super....vielen Dank für die Rückmeldung.
Bei der guten Beschreibung war der Fehler nicht schwer zu finden
Vielen Dank und Gruß
LausiD

ralf-ms

Hallo zusammen, ich noch mal

Wenn ich über fhem versuche, die Lautstärke eines Amazon echo's zu ändern

set fhem.0.send2ioB alexa2.0.Echo-Devices.xyz.Player.volume 30

bekomme ich in iobroker die Fehlermeldung

error: Datatype for Echo-Devices.xyz.Player.volume differs from expected, ignore state change! Please write correct datatype (number)

Wie mach ich's richtig?

LausiD

@ralf-ms
Sorry, hier gab es kein richtig
Konnte das Problem nachstellen und habe kleine Änderung eingebaut.
Nach Update von github V1.2.1 sollte es flutschen....

ralf-ms

Hi LausiD,

tuts!
Vielen Dank für die wie immer fixe Behebung!

Grüße
Ralf

ChrisXY

hey du hattest doch die Bewegungsmelder angepasst damitmotion auch ein state mit true/false bekommt ... irgendwie ist das wieder verschwunden. Hab fhem Adapter nicht geupdatet .. Wie kann das den ?

LausiD

@ChrisXY
Du hast kein Update FHEM Adapter gemacht und nach Neustart Adapter wurde state_boolean gelöscht?
Auswendig gesagt hatte state beim Adapter Start einen anderen Wert als motion oder nomotion
Bei jedem Neustart wird abhängig vom Wert state ein state_boolean, state_switch usw angelegt oder auch gelöscht falls state keinen passenden Wert hat.

Gruß
LausiD

ChrisXY

Okay was ich immer machen muss nach einem Neustart. den Fhem Adapter neu startet dann taucht sofort state_boolean wieder auf .. komisch
Das dumme ist das die Optionen ( logging usw. ) auch wieder alle weg sind.

LausiD

@ChrisXY
Ok habe glaub verstanden

Nach Neustart FHEM wird auch der FHEM Adapter automatisch neu gestartet. Zu diesem Zeitpunkt hat state nicht den Wert motion oder nomotion, somit wurde kein boolean Wert erkannt und state_boolean gelöscht.
Wurde FHEM Adapter später neu gestartet hat state wieder motion oder nomotion und es wurde wieder ein state_boolean angelegt.
So war es, oder?

Habe folgende Änderung gemacht.
Zusätzlich zum state wird noch subType=motionDetector geprüft. Wenn vorhanden wird immer ein state_boolean angelegt und auch nicht mehr gelöscht.

Nach Update FHEM Adapter 2.2.2 (12.07.19) von github kannst du testen...

Gruß
LausiD

crissiloop

Hallo LausiD,

ich habe ein Problem damit, Geräte von ioBroker nach FHEM zu bekommen.
Habe den Shelly bei allowedIOBin eingetragen, aber es wird kein Dummy in FHEM angelegt.

Anbei ein Log:

fhem.0	2019-07-18 21:52:13.829	warn	[stateChange] no match shelly.0.SHSW-1#2BEB4E#1.rssi {"val":-66,"ack":true,"ts":1563479533826,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479533826}
fhem.0	2019-07-18 21:52:09.732	warn	[stateChange] no match shelly.0.SHSW-1#2BE9AD#1.rssi {"val":-44,"ack":true,"ts":1563479529729,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479529729}
fhem.0	2019-07-18 21:52:09.516	warn	[stateChange] no match shelly.0.SHSW-1#22F84C#1.rssi {"val":-71,"ack":true,"ts":1563479529514,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479529514}
fhem.0	2019-07-18 21:52:08.654	warn	[stateChange] no match shelly.0.SHSW-1#2BEB4E#1.rssi {"val":-67,"ack":true,"ts":1563479528652,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479528652}
fhem.0	2019-07-18 21:52:05.309	info	event ioBroker "fhem.0.info.Commands.sendFHEM set shelly.0.SHSW_1#2BE9AD#1.Relay0.Switch false" > set shelly.0.SHSW_1#2BE9AD#1.Relay0.Switch false
fhem.0	2019-07-18 21:52:05.278	info	event ioBroker "fhem.0.info.Commands.sendFHEM set shelly.0.SHSW_1#2BE9AD#1.Relay0.Switch false" > set shelly.0.SHSW_1#2BE9AD#1.Relay0.Switch false
fhem.0	2019-07-18 21:52:04.549	warn	[stateChange] no match shelly.0.SHSW-1#2BE9AD#1.rssi {"val":-46,"ack":true,"ts":1563479524547,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479524547}
fhem.0	2019-07-18 21:52:04.322	warn	[stateChange] no match shelly.0.SHSW-1#22F84C#1.rssi {"val":-74,"ack":true,"ts":1563479524320,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479524320}
fhem.0	2019-07-18 21:52:02.010	info	event ioBroker "fhem.0.info.Commands.sendFHEM set shelly.0.SHSW_1#2BE9AD#1.Relay0.Switch true" > set shelly.0.SHSW_1#2BE9AD#1.Relay0.Switch true
fhem.0	2019-07-18 21:52:01.994	info	event ioBroker "fhem.0.info.Commands.sendFHEM set shelly.0.SHSW_1#2BE9AD#1.Relay0.Switch true" > set shelly.0.SHSW_1#2BE9AD#1.Relay0.Switch true
fhem.0	2019-07-18 21:52:01.978	info	event ioBroker "fhem.0.info.Commands.sendFHEM attr shelly.0.SHSW_1#2BE9AD#1.Relay0.Switch comment Auto-created by ioBroker fhem.0" > attr shelly.0.SHSW_1#2BE9AD#1.Relay0.Switch comment Auto-created b
fhem.0	2019-07-18 21:52:01.962	info	event ioBroker "fhem.0.info.Commands.sendFHEM attr shelly.0.SHSW_1#2BE9AD#1.Relay0.Switch room ioB_IN" > attr shelly.0.SHSW_1#2BE9AD#1.Relay0.Switch room ioB_IN
fhem.0	2019-07-18 21:52:01.945	info	event ioBroker "fhem.0.info.Commands.sendFHEM attr shelly.0.SHSW_1#2BE9AD#1.Relay0.Switch alias shelly.0.SHSW_1#2BE9AD#1.Relay0.Switch" > attr shelly.0.SHSW_1#2BE9AD#1.Relay0.Switch alias shelly.0.SH
fhem.0	2019-07-18 21:52:01.936	info	event ioBroker "fhem.0.info.Commands.sendFHEM define shelly.0.SHSW_1#2BE9AD#1.Relay0.Switch dummy" > define shelly.0.SHSW_1#2BE9AD#1.Relay0.Switch dummy
fhem.0	2019-07-18 21:51:59.363	warn	[stateChange] no match shelly.0.SHSW-1#2BE9AD#1.rssi {"val":-45,"ack":true,"ts":1563479519360,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479519360}
fhem.0	2019-07-18 21:51:48.713	warn	[stateChange] no match shelly.0.SHSW-1#22F84C#1.rssi {"val":-73,"ack":true,"ts":1563479508711,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479508711}
fhem.0	2019-07-18 21:51:43.513	warn	[stateChange] no match shelly.0.SHSW-1#22F84C#1.rssi {"val":-71,"ack":true,"ts":1563479503512,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479503512}
fhem.0	2019-07-18 21:51:42.714	warn	[stateChange] no match shelly.0.SHSW-1#2BEB4E#1.rssi {"val":-66,"ack":true,"ts":1563479502711,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479502711}
fhem.0	2019-07-18 21:51:38.341	warn	[stateChange] no match shelly.0.SHSW-1#22F84C#1.rssi {"val":-72,"ack":true,"ts":1563479498339,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479498339}
fhem.0	2019-07-18 21:51:37.518	warn	[stateChange] no match shelly.0.SHSW-1#2BEB4E#1.rssi {"val":-67,"ack":true,"ts":1563479497516,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479497516}
fhem.0	2019-07-18 21:51:33.424	warn	[stateChange] no match shelly.0.SHSW-1#2BE9AD#1.rssi {"val":-46,"ack":true,"ts":1563479493422,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479493422}
fhem.0	2019-07-18 21:51:33.145	warn	[stateChange] no match shelly.0.SHSW-1#22F84C#1.rssi {"val":-70,"ack":true,"ts":1563479493143,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479493143}
fhem.0	2019-07-18 21:51:28.240	warn	[stateChange] no match shelly.0.SHSW-1#2BE9AD#1.rssi {"val":-45,"ack":true,"ts":1563479488238,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479488238}
fhem.0	2019-07-18 21:51:27.964	warn	[stateChange] no match shelly.0.SHSW-1#22F84C#1.rssi {"val":-71,"ack":true,"ts":1563479487962,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479487962}
fhem.0	2019-07-18 21:51:23.043	warn	[stateChange] no match shelly.0.SHSW-1#2BE9AD#1.rssi {"val":-46,"ack":true,"ts":1563479483041,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479483041}
fhem.0	2019-07-18 21:51:22.771	warn	[stateChange] no match shelly.0.SHSW-1#22F84C#1.rssi {"val":-72,"ack":true,"ts":1563479482769,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479482769}
fhem.0	2019-07-18 21:51:17.830	warn	[stateChange] no match shelly.0.SHSW-1#2BE9AD#1.rssi {"val":-45,"ack":true,"ts":1563479477828,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479477828}
fhem.0	2019-07-18 21:51:17.571	warn	[stateChange] no match shelly.0.SHSW-1#22F84C#1.rssi {"val":-71,"ack":true,"ts":1563479477568,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479477568}
fhem.0	2019-07-18 21:51:16.749	warn	[stateChange] no match shelly.0.SHSW-1#2BEB4E#1.rssi {"val":-66,"ack":true,"ts":1563479476746,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479476746}
fhem.0	2019-07-18 21:51:12.640	warn	[stateChange] no match shelly.0.SHSW-1#2BE9AD#1.rssi {"val":-44,"ack":true,"ts":1563479472638,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479472638}
fhem.0	2019-07-18 21:51:11.557	warn	[stateChange] no match shelly.0.SHSW-1#2BEB4E#1.rssi {"val":-67,"ack":true,"ts":1563479471554,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479471554}
fhem.0	2019-07-18 21:51:06.356	warn	[stateChange] no match shelly.0.SHSW-1#2BEB4E#1.rssi {"val":-66,"ack":true,"ts":1563479466353,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479466353}
fhem.0	2019-07-18 21:51:02.264	warn	[stateChange] no match shelly.0.SHSW-1#2BE9AD#1.rssi {"val":-45,"ack":true,"ts":1563479462262,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479462262}
fhem.0	2019-07-18 21:51:02.109	warn	[stateChange] no match shelly.0.SHSW-1#22F84C#1.rssi {"val":-70,"ack":true,"ts":1563479462010,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479462010}
fhem.0	2019-07-18 21:50:57.084	warn	[stateChange] no match shelly.0.SHSW-1#2BE9AD#1.rssi {"val":-44,"ack":true,"ts":1563479457082,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479457082}
fhem.0	2019-07-18 21:50:55.971	warn	[stateChange] no match shelly.0.SHSW-1#2BEB4E#1.rssi {"val":-67,"ack":true,"ts":1563479455969,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479455969}
fhem.0	2019-07-18 21:50:50.791	warn	[stateChange] no match shelly.0.SHSW-1#2BEB4E#1.rssi {"val":-65,"ack":true,"ts":1563479450789,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479450789}
fhem.0	2019-07-18 21:50:46.696	warn	[stateChange] no match shelly.0.SHSW-1#2BE9AD#1.rssi {"val":-45,"ack":true,"ts":1563479446694,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479446694}
fhem.0	2019-07-18 21:50:45.239	info	END ===== Synchronised FHEM in 712235 ms :-)
fhem.0	2019-07-18 21:50:45.239	warn	> more info FHEM Adapter visit https://github.com/iobroker-community-adapters/ioBroker.fhem/blob/master/docs/de/README.md
fhem.0	2019-07-18 21:50:45.239	info	event ioBroker "fhem.0.info.Commands.sendFHEM set fhem.0.alive on-for-timer 360" > set fhem.0.alive on-for-timer 360
fhem.0	2019-07-18 21:50:45.238	info	> activate fhem.0.alive room ioB_System every 5 minutes
fhem.0	2019-07-18 21:50:45.238	info	> Number of devices FHEM (synchro) = 53 - fhem.0.info.Info.numberDevicesFHEMsync (53)
fhem.0	2019-07-18 21:50:45.237	info	> Number of objects IOB in = 1820 - fhem.0.info.Info.numberObjectsIOBin (1820)
fhem.0	2019-07-18 21:50:45.237	info	> Number of objects IOB out (possible) = 1 - fhem.0.info.Info.numberObjectsIOBoutSub (1)
fhem.0	2019-07-18 21:50:45.234	info	> Number of objects IOB out = 1 - fhem.0.info.Info.numberObjectsIOBout (1)
fhem.0	2019-07-18 21:50:45.233	info	> room of fhem.x.info.Configurations.onlySyncRoom exist = true - fhem.0.info.Info.roomioBroker (true)
fhem.0	2019-07-18 21:50:45.232	info	> Number of devices FHEM (jsonlist2) = 230 - fhem.0.info.Info.numberDevicesFHEM (230)
fhem.0	2019-07-18 21:50:45.231	info	> Date of main.js = 12.07.19 - fhem.0.info.Info.buildDate (12.07.19)
fhem.0	2019-07-18 21:50:45.220	info	STEP 11 ==== info Synchro
fhem.0	2019-07-18 21:50:45.220	info	> dummy fhem.0.alive - use to check alive FHEM Adapter in FHEM
fhem.0	2019-07-18 21:50:45.220	info	> dummy fhem.0.send2ioB - use to set objects/states of ioBroker from FHEM
fhem.0	2019-07-18 21:50:45.220	info	STEP 10 ==== check/create FHEM dummy Devices in room ioB_System
fhem.0	2019-07-18 21:50:45.219	info	> delete unused objects (*) > delete 0 channel(s) and 0 state(s)
fhem.0	2019-07-18 21:50:44.821	info	STEP 09 ===== check delete unused objects
fhem.0	2019-07-18 21:50:42.596	info	> check 1794 state(s) update/create
fhem.0	2019-07-18 21:50:42.596	info	> check 0 function(s) update/create
fhem.0	2019-07-18 21:50:42.550	info	> check 19 room(s) update/create
fhem.0	2019-07-18 21:50:41.257	warn	[stateChange] no match shelly.0.SHSW-1#22F84C#1.rssi {"val":-71,"ack":true,"ts":1563479441255,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479441255}
fhem.0	2019-07-18 21:50:40.397	warn	[stateChange] no match shelly.0.SHSW-1#2BEB4E#1.rssi {"val":-66,"ack":true,"ts":1563479440395,"q":0,"from":"system.adapter.shelly.0","user":"system.user.admin","lc":1563479440395}
fhem.0	2019-07-18 21:50:38.032	info	> check 1847 object(s) update/create - 53 channel(s) with 1794 state(s) / 1794 state(s) to sync:
fhem.0	2019-07-18 21:50:38.032	info	STEP 08 ===== Synchro objects,rooms,functions,states
fhem.0	2019-07-18 21:50:38.031	info	> check channel - 53 Device(s) of FHEM synchronized
fhem.0	2019-07-18 21:50:38.031	info	> 1 objects to send FHEM detected (ioBout)
fhem.0	2019-07-18 21:50:38.027	info	ignore FHEM device "fhem.0.alive" | comment: Auto-created by ioBroker fhem.0 | 213/230
fhem.0	2019-07-18 21:50:37.949	info	> no sync device(s) with Internals:NAME = info - fhem.0.info.Configurations.ignoreObjectsInternalsNAME (info)
fhem.0	2019-07-18 21:50:37.949	info	> only sync device(s) from room(s) = ioBroker,ioB_OUT - fhem.0.info.Info.roomioBroker (true)
fhem.0	2019-07-18 21:50:37.949	info	> check channel - 230 Device(s) of FHEM found
fhem.0	2019-07-18 21:50:37.948	info	STEP 07 ===== parse Objects
fhem.0	2019-07-18 21:50:37.947	info	> 1 state(s) of "shelly.0.SHSW-1#2BE9AD#1.Relay0.Switch" detected
fhem.0	2019-07-18 21:50:37.940	info	check fhem.0.info.Configurations.allowedIOBin
fhem.0	2019-07-18 21:50:37.940	info	STEP 06 ===== check Subscribe

Was mache ich falsch?

gruß
crissiloop

LausiD

@crissiloop
Hiermit wird Dummy in FHEM angelegt:
fhem.0 2019-07-18 21:52:01.936 info event ioBroker "fhem.0.info.Commands.sendFHEM define shelly.0.SHSW_1#2BE9AD#1.Relay0.Switch dummy" > define shelly.0.SHSW_1#2BE9AD#1.Relay0.Switch dummy]

Antwort von FHEM:
Invalid characters in name (not A-Za-z0-9._): shelly.0.SHSW_1#2BE9AD#1.Relay0.Switch

Problem:
FHEM lässt leider nur Namen ohne "#" zu

2 Möglichkeiten:

Name ohne "#" verwenden
Umwandlung "#" in zB "_" durch FHEM Adapter

Gruß
LausiD

LausiD

@crissiloop
Nach Update FHEM Adapter Version 1.3.0 über github sollte Möglichkeit 2 funktionieren.
"#" im Name(ioB) wird durch "_" ersetzt.
Aus shelly.0.SHSW_1#2BE9AD#1.Relay0.Switch wird in FHEM shelly.0.SHSW_1_2BE9AD_1.Relay0.Switch.

Rückmeldung wäre super
Danke und Gruß
LausiD

ChrisXY

Hab ein Problem. Wenn fhem Adapter neu starten oder iobroker wird wohl irgendwie der Status geändert oder erneuert z. b Fenster sensor den ich per hm und fhem am laufen habe.

Wenn nun meine Alarmanlage in iobroker scharf ist reagiert diese als ob ein Fenster geöffnet wurde.
Fenster ist open. Ist im Sommer immer alarm reagiert nur wenn status auf open geändert wurde.
Durch Neustart wird wohl wieder open gesetzt... Und der alarm geht los.
Was kann das sein?

LausiD

@ChrisXY sagte in FHEM Adapter:

Durch Neustart wird wohl wieder open gesetzt.

Bei jedem Start FHEM Adapter werden die aktuellen Werte aus FHEM eingelesen.
Laut Beschreibung ist in diesem Moment der HM Sensor in FHEM auf "open"
Kannst du mal aus FHEM ein jsonlist2 vom betroffenen Fenster hier einstellen?
Gruß
LausiD

ChrisXY

hi, hier bitte



 
{
  "Arg":"hm.fenster.badlinks",
  "Results": [
  {
    "Name":"hm.fenster.badlinks",
    "PossibleSets":"assignHmKey:noArg clear:readings,trigger,register,oldRegs,rssi,msgEvents,msgErrors,attack,all deviceRename fwUpdate getConfig:noArg getDevInfo:noArg getRegRaw peerBulk peerChan raw regBulk regSet reset:noArg sign:on,off trgEventL trgEventS trgPressL:all,heizung_badunten_WindowRec trgPressS:all,heizung_badunten_WindowRec unpair:noArg  peerSmart:remove_heizung_badunten_WindowRec,Rauchmelder_Team,TeamVirtuell_Stall,VCCU_Btn4,VCCU_disarm,VCCU_lampe_stall_unterstand,VCCU_lampe_stall_unterstand_reitplatz,heizung_badoben_WindowRec,heizung_badoben_remote,heizung_badunten_remote,heizung_buro_WindowRec,heizung_buro_remote,heizung_esszimmer_WindowRec,heizung_esszimmer_remote,heizung_milena_WindowRec,heizung_milena_remote,heizung_schlafzimmer_WindowRec,heizung_schlafzimmer_remote,heizung_wohnzimmervitrine_WindowRec,heizung_wohnzimmervitrine_remote,pumpe_regenwasser_Sw,strom_aquarium_Sw,strom_server_Sw,strom_zaun ",
    "PossibleAttrs":"alias comment:textField-long eventMap:textField-long group room suppressReading userReadings:textField-long verbose:0,1,2,3,4,5 do_not_notify:1,0 showtime:1,0 rawToReadable unit expert:0_defReg,1_allReg,2_defReg+raw,3_allReg+raw,4_off,8_templ+default,12_templOnly,251_anything param readOnly:0,1 actAutoTry:0_off,1_on aesCommReq:1,0 model ignore:1,0 dummy:1,0 IODev IOList IOgrp rssiLog:1,0 actCycle hmKey hmKey2 hmKey3 readingOnDead:multiple,noChange,state,periodValues,periodString,channels subType:AlarmControl,KFM100,THSensor,blindActuator,blindActuatorSol,dimmer,display,keyMatic,motionAndBtn,motionDetector,no,outputUnit,powerMeter,powerSensor,pushButton,remote,repeater,rgb,senBright,sensRain,sensor,singleButton,siren,smokeDetector,swi,switch,thermostat,threeStateSensor,timer,tipTronic,virtual,winMatic .mId serialNr firmware .stc .devInfo actStatus autoReadReg:0_off,1_restart,2_pon-restart,3_onChange,4_reqStatus,5_readMissing,8_stateOnly burstAccess:0_off,1_auto msgRepeat hmProtocolEvents:0_off,1_dump,2_dumpFull,3_dumpTrigger aesKey:5,4,3,2,1,0  modelForce:ACTIONDETECTOR,ACTIONDETECTOR,ASH550,ASH550I,CCU-FHEM,CMM,DORMA_ATENT,DORMA_BRC-H,DORMA_RC-H,HM-CC-RT-DN,HM-CC-RT-DN-BOM,HM-CC-SCD,HM-CC-TC,HM-CC-VD,HM-DIS-EP-WM55,HM-DIS-TD-T,HM-DIS-WM55,HM-DW-WM,HM-ES-PMSW1-DR,HM-ES-PMSW1-PL,HM-ES-PMSW1-PL-DN-R1,HM-ES-PMSW1-PL-DN-R2,HM-ES-PMSW1-PL-DN-R3,HM-ES-PMSW1-PL-DN-R4,HM-ES-PMSW1-PL-DN-R5,HM-ES-PMSW1-SM,HM-ES-TX-WM,HM-HM-LC-DW-WM,HM-LC-AO-SM,HM-LC-BL1-FM,HM-LC-BL1-FM-2,HM-LC-BL1-PB-FM,HM-LC-BL1-SM,HM-LC-BL1-SM-2,HM-LC-BL1PBU-FM,HM-LC-DDC1-PCB,HM-LC-DIM1L-CV,HM-LC-DIM1L-CV-2,HM-LC-DIM1L-CV-644,HM-LC-DIM1L-PL,HM-LC-DIM1L-PL-2,HM-LC-DIM1L-PL-3,HM-LC-DIM1L-PL-644,HM-LC-DIM1PWM-CV,HM-LC-DIM1PWM-CV-2,HM-LC-DIM1T-CV,HM-LC-DIM1T-CV-2,HM-LC-DIM1T-CV-644,HM-LC-DIM1T-DR,HM-LC-DIM1T-FM,HM-LC-DIM1T-FM-2,HM-LC-DIM1T-FM-644,HM-LC-DIM1T-FM-LF,HM-LC-DIM1T-PL,HM-LC-DIM1T-PL-2,HM-LC-DIM1T-PL-3,HM-LC-DIM1T-PL-644,HM-LC-DIM1TPBU-FM,HM-LC-DIM1TPBU-FM-2,HM-LC-DIM2L-CV,HM-LC-DIM2L-SM,HM-LC-DIM2L-SM-2,HM-LC-DIM2L-SM-644,HM-LC-DIM2T-SM,HM-LC-DIM2T-SM,HM-LC-DIM2T-SM-2,HM-LC-JA1PBU-FM,HM-LC-RGBW-WM,HM-LC-SW1-BA-PCB,HM-LC-SW1-DR,HM-LC-SW1-FM,HM-LC-SW1-FM-2,HM-LC-SW1-PB-FM,HM-LC-SW1-PCB,HM-LC-SW1-PL,HM-LC-SW1-PL-3,HM-LC-SW1-PL-CT-R1,HM-LC-SW1-PL-CT-R2,HM-LC-SW1-PL-CT-R3,HM-LC-SW1-PL-CT-R4,HM-LC-SW1-PL-CT-R5,HM-LC-SW1-PL-DN-R1,HM-LC-SW1-PL-DN-R2,HM-LC-SW1-PL-DN-R3,HM-LC-SW1-PL-DN-R4,HM-LC-SW1-PL-DN-R5,HM-LC-SW1-PL-OM54,HM-LC-SW1-PL2,HM-LC-SW1-SM,HM-LC-SW1-SM-2,HM-LC-SW1-SM-ATMEGA168,HM-LC-SW1PBU-FM,HM-LC-SW2-DR,HM-LC-SW2-DR-2,HM-LC-SW2-FM,HM-LC-SW2-FM-2,HM-LC-SW2-PB-FM,HM-LC-SW2-SM,HM-LC-SW2PBU-FM,HM-LC-SW4-BA-PCB,HM-LC-SW4-DR,HM-LC-SW4-DR-2,HM-LC-SW4-PCB,HM-LC-SW4-PCB-2,HM-LC-SW4-SM,HM-LC-SW4-SM-2,HM-LC-SW4-SM-ATMEGA168,HM-LC-SW4-WM,HM-LC-SW4-WM-2,HM-MOD-EM-8,HM-MOD-EM-8BIT,HM-MOD-RE-8,HM-OU-CF-PL,HM-OU-CFM-PL,HM-OU-CFM-TW,HM-OU-CM-PCB,HM-OU-LED16,HM-PB-2-FM,HM-PB-2-WM,HM-PB-2-WM55,HM-PB-2-WM55-2,HM-PB-4-WM,HM-PB-4DIS-WM,HM-PB-4DIS-WM-2,HM-PB-6-WM55,HM-PBI-4-FM,HM-RC-12,HM-RC-12-B,HM-RC-12-SW,HM-RC-19,HM-RC-19-B,HM-RC-19-SW,HM-RC-2-PBU-FM,HM-RC-4,HM-RC-4-2,HM-RC-4-3,HM-RC-4-3-D,HM-RC-4-B,HM-RC-8,HM-RC-DIS-H-X-EU,HM-RC-KEY3,HM-RC-KEY3-B,HM-RC-KEY4-2,HM-RC-KEY4-3,HM-RC-P1,HM-RC-SEC3,HM-RC-SEC3-B,HM-RC-SEC4-2,HM-RC-SEC4-3,HM-SCI-3-FM,HM-SEC-CEN,HM-SEC-KEY,HM-SEC-KEY-O,HM-SEC-KEY-S,HM-SEC-MDIR,HM-SEC-MDIR-2,HM-SEC-MDIR-3,HM-SEC-RHS,HM-SEC-RHS-2,HM-SEC-SC,HM-SEC-SC-2,HM-SEC-SCO,HM-SEC-SD,HM-SEC-SD-2,HM-SEC-SFA-SM,HM-SEC-SIR-WM,HM-SEC-TIS,HM-SEC-WDS,HM-SEC-WDS-2,HM-SEC-WIN,HM-SEN-DB-PCB,HM-SEN-EP,HM-SEN-LI-O,HM-SEN-MDIR-O,HM-SEN-MDIR-O-2,HM-SEN-MDIR-O-3,HM-SEN-MDIR-SM,HM-SEN-MDIR-WM55,HM-SEN-RD-O,HM-SEN-WA-OD,HM-SWI-3-FM,HM-SYS-SRP-PL,HM-TC-IT-WM-W-EU,HM-WDC7000,HM-WDS10-TH-O,HM-WDS100-C6-O,HM-WDS100-C6-O-2,HM-WDS20-TH-O,HM-WDS30-OT2-SM,HM-WDS30-OT2-SM-2,HM-WDS30-T-O,HM-WDS40-TH-I,HM-WDS40-TH-I-2,HM-WS550,HM-WS550LCB,HM-WS550LCW,HM-WS550TECH,IS-WDS-TH-OD-S-R3,KFM-DISPLAY,KFM-SENSOR,KS550,KS550LC,KS550TECH,KS888,OLIGO-SMART-IQ-HM,PS-SWITCH,PS-TH-SENS,ROTO_ZEL-STG-RM-DWT-10,ROTO_ZEL-STG-RM-FDK,ROTO_ZEL-STG-RM-FEP-230V,ROTO_ZEL-STG-RM-FFK,ROTO_ZEL-STG-RM-FSA,ROTO_ZEL-STG-RM-FSS-UP3,ROTO_ZEL-STG-RM-FST-UP4,ROTO_ZEL-STG-RM-FWT,ROTO_ZEL-STG-RM-FZS,ROTO_ZEL-STG-RM-FZS-2,ROTO_ZEL-STG-RM-HS-4,ROTO_ZEL-STG-RM-WT-2,S550IA,SCHUECO_263-130,SCHUECO_263-131,SCHUECO_263-132,SCHUECO_263-133,SCHUECO_263-134,SCHUECO_263-135,SCHUECO_263-144,SCHUECO_263-145,SCHUECO_263-146,SCHUECO_263-147,SCHUECO_263-155,SCHUECO_263-157,SCHUECO_263-158,SCHUECO_263-160,SCHUECO_263-162,SCHUECO_263-167,SCHUECO_263-XXX,SENSOTIMER-ST-6,VIRTUAL,WDF-SOLAR,WS888 repPeers peerIDs tempListTmpl:none,defaultWeekplan, levelRange levelMap cyclicMsgOffset event-aggregator event-min-interval event-on-change-reading event-on-update-reading oldreadings stateFormat:textField-long timestamp-on-change-reading DbLogExclude DbLogInclude alarmDevice:Actor,Sensor alarmSettings cmdIcon devStateIcon:textField-long devStateStyle icon msgContactAudio msgContactLight msgContactMail msgContactPush msgContactScreen msgParams msgPriority msgRecipient msgRecipientAudio msgRecipientLight msgRecipientMail msgRecipientPush msgRecipientScreen msgRecipientText msgTitle msgTitleShrt msgType:text,push,mail,screen,light,audio,queue sortby webCmd webCmdLabel:textField-long widgetOverride winOpenMaxTrigger winOpenTimer winOpenTimer2 winOpenType:Fenster,Türe winOpenName userattr",
    "Internals": {
      "DEF": "559C78",
      "FUUID": "5c50b8ad-f33f-09a2-26a9-c4d995bafb28ba18",
      "HMLANGW_MSGCNT": "47",
      "HMLANGW_RAWMSG": "05000083A1A241559C7800663301F9C8",
      "HMLANGW_RSSI": "-131",
      "HMLANGW_TIME": "2019-07-21 21:09:13",
      "HMLAN_MSGCNT": "59",
      "HMLAN_RAWMSG": "E559C78,0000,49B79D1A,FF,FFBF,A1A241559C7800663301F9C8",
      "HMLAN_RSSI": "-65",
      "HMLAN_TIME": "2019-07-21 21:09:13",
      "LASTInputDev": "HMLAN",
      "MSGCNT": "106",
      "NAME": "hm.fenster.badlinks",
      "NOTIFYDEV": "global",
      "NR": "242",
      "NTFY_ORDER": "50-hm.fenster.badlinks",
      "STATE": "open",
      "TYPE": "CUL_HM",
      "chanNo": "01",
      "lastMsg": "No:A1 - t:41 s:559C78 d:006633 01F9C8",
      "peerList": "heizung_badunten_WindowRec,",
      "protLastRcv": "2019-07-21 21:09:13",
      "protRcv": "72 last_at:2019-07-21 21:09:13",
      "protRcvB": "39 last_at:2019-07-21 21:09:13",
      "protSnd": "39 last_at:2019-07-21 21:09:13",
      "protState": "CMDs_done",
      "rssi_at_HMLAN": "cnt:59 min:-72 max:-63 avg:-68.11 lst:-65 ",
      "rssi_at_HMLANGW": "cnt:47 min:-134 max:-31 avg:-126.44 lst:-131 "
    },
    "Readings": {
      ".protLastRcv": { "Value":"2019-07-21 21:09:13", "Time":"2019-07-21 21:09:13" },
      "3SSunknownMsg": { "Value":"26210000", "Time":"2019-07-14 16:30:23" },
      "Activity": { "Value":"alive", "Time":"2019-07-10 11:08:46" },
      "D-firmware": { "Value":"2.4", "Time":"2019-02-04 09:54:56" },
      "D-serialNr": { "Value":"NEQ1837197", "Time":"2019-02-04 09:54:56" },
      "alive": { "Value":"yes", "Time":"2019-07-19 19:58:53" },
      "battery": { "Value":"ok", "Time":"2019-07-21 21:09:13" },
      "contact": { "Value":"open (to VCCU)", "Time":"2019-07-21 21:09:13" },
      "peerList": { "Value":"heizung_badunten_WindowRec,", "Time":"2019-07-10 11:08:49" },
      "recentStateType": { "Value":"info", "Time":"2019-07-19 19:58:53" },
      "sabotageError": { "Value":"off", "Time":"2019-07-19 19:58:53" },
      "state": { "Value":"open", "Time":"2019-07-21 21:09:13" },
      "trigDst_006613": { "Value":"noConfig", "Time":"2019-05-31 09:15:44" },
      "trigDst_006673": { "Value":"noConfig", "Time":"2019-06-22 11:52:19" },
      "trigDst_HM_80E633": { "Value":"noConfig", "Time":"2019-07-02 20:57:01" },
      "trigger_cnt": { "Value":"249", "Time":"2019-07-21 21:09:13" }
    },
    "Attributes": {
      ".mId": "00B1",
      "DbLogExclude": ".*",
      "DbLogInclude": "state,sabotageError",
      "IODev": "HMLAN",
      "IOgrp": "VCCU:HMLAN",
      "actCycle": "028:00",
      "actStatus": "alive",
      "alarmDevice": "Sensor",
      "alarmSettings": "alarm5,|hm.fenster.badlinks:open|Alarm Fenster BAD LINKS AUF|on",
      "alias": "hm.fenster.badlinks",
      "autoReadReg": "4_reqStatus",
      "expert": "2_raw",
      "firmware": "2.4",
      "group": "Fenster",
      "model": "HM-SEC-SC-2",
      "peerIDs": "00000000,22873403,",
      "room": "Sicherheit,ioBroker",
      "serialNr": "NEQ1837197",
      "subType": "threeStateSensor",
      "userattr": "winOpenMaxTrigger winOpenTimer winOpenTimer2 winOpenType:Fenster,Türe winOpenName",
      "winOpenMaxTrigger": "2",
      "winOpenName": "Bad-Fenster-Links",
      "winOpenTimer": "00:20:00",
      "winOpenTimer2": "00:40:00",
      "winOpenType": "Fenster"
    }
  }  ],
  "totalResultsReturned":1
}

edit und so schaut das blockly aus. Vielleicht muss ich als "ist Wahr" ist größer rals letztes ??

LausiD

@ChrisXY sagte in FHEM Adapter:

"state": { "Value":"open", "Time":"2019-07-21 21:09:13" },

Beim Start FHEM Adapter ist
state Fenster open, dadurch wird hm.fenster.badlinks.state_boolean true auch neu geschrieben.
Blocky ist jetzt leider nicht so meins, aber vermutlich wird dadurch der Alarm gesetzt.

Gruß
LausiD

ChrisXY

ja genau .. das ist das problem Mal sehen wie ich das in Blockly löse ohne die ganzen Objekte nochmal im falls einzubauen

crissiloop

@LausiD
Soeben probiert, und die Umwandlung von # in _ funktioniert.
Besten Dank.
Gruß
crissiloop

LausiD

@crissiloop
Vielen Dank für die Rückmeldung.
Version 1.3.0 ist jetzt latest

Gruß und viel Spass mit ioB und FHEM
LausiD

NEWS

FHEM Adapter

Support us

336

32.4k

81.4k

1.3m