MQTT und Tasmota

ecki945

den mqtt adapter deinstallieren oder belassen?

Glasfaser

Kannst Ihn ja auch nur deaktivieren , vielleicht brauchst du Ihn für andere Geräte .

ecki945

Sodele. Habe nun den nodemcu mit Orignalsoftware geflasht und "nur" meine WLAN Daten geändert, SML Unterstützung aktiviert und den Zählertyp definiert.

Hier die Einstellungen von Tasmota:

Laut Konsole von Tasmota sendet dieser auch alle 10 Sekunden die aktuellen Werte.

Im Iobroker habe ich den sonoff und mqtt adapter deinstalliert und den sonoff neu installiert.

Das Problem nun ist, dass bis auf die Verbindungsparamter nix mehr übertragen wird.

Glasfaser

@ecki945

Zeig mal bitte die Startseite mit den Werten und die Geräte Einstellung

ecki945

Senden tut der tasmota ja, die erste Information wird wohl auch verarbeitet im Iobroker. nur die 2te Information mit den Zählerständen nicht.

![e22bb432-020b-4165-b6b3-9d15b79fc935-grafik.png](/assets/uploads/files/1565545031419-e22bb432-020b-4165-b6b3-9d15b79fc935-grafik.png) code_text

Tasmota Software habe ich von gemu2015 verwendet (Branch universal5)

https://github.com/gemu2015/Sonoff-Tasmota

ecki945

ecki945

das ganze unter iobroker:

Node.js: v10.16.2
NPM: 6.9.0

Jan1

@ecki945
Warum so ne alte Tasmota und hast mal Dein Flashspeicher gesehen? 4MB, allerdings nur 3MB verfügbar, wobei ein Sonoff Basic normal eh nur 1MB hat.

Glasfaser

@ecki945

Hast du im Log kein STATE. ,

@ecki945 sagte in MQTT und Tasmota:

`
15:56:33 RSL: tele/IskraMT175/SENSOR = {"Time":"2019-08-11T15:56:33","SML":{"Total_in":1633.9575,"Total_out":17787.5186,"Power_curr":-551,"Meter_number":"0649534b011073747990"}})

Zeig mal den gesamten Log vom ESP. Ab Neustart und wo ein paar daten gesendet werden .

ecki945

@Jan1 said in MQTT und Tasmota:

@ecki945
Warum so ne alte Tasmota und hast mal Dein Flashspeicher gesehen? 4MB, allerdings nur 3MB verfügbar, wobei ein Sonoff Basic normal eh nur 1MB hat.

Mit dieser Tasmota Version habe ich schon einige Projekte realisert. Die NodeMCU Lua Lolin V3 hat nun mal 4MByte Flasch Speicher. (Natürlich wird "nur" 1MByte verwendet)

Jan1

@ecki945
eben nicht, es werden 3MB verwendet und warum auf Basic und nicht auf generic?

OK, wenn bei der 6.6.0.4 nichts für Dich relevant dabei istr kannst auch bei der 6.5 bleiben wobei da nach Changelog schon einige Bugfix drin sind.

ecki945

00:00:00 CFG: Loaded from flash at 3F6, Count 6
00:00:00 Project sonoff Sonoff Version 6.5.0.16(sonoff)-2_5_2
00:00:00 SNS: Hardware Serial
00:00:00 WIF: Connecting to AP1 FRITZ!Box 7490 in mode 11N as sonoff-3209...
00:00:04 WIF: Connected
00:00:04 HTP: Web server active on sonoff-3209 with IP address 192.168.178.45
19:02:08 RSL: tele/sonoff/UPTIME = {"Time":"2019-08-11T19:02:08","Uptime":"0T00:00:05"}
19:02:09 MQT: Attempting connection...
19:02:09 MQT: Connected
19:02:09 MQT: tele/sonoff/LWT = Online (retained)
19:02:09 MQT: cmnd/sonoff/POWER = 
19:02:09 RSL: tele/sonoff/INFO1 = {"Module":"Sonoff Basic","Version":"6.5.0.16(sonoff)","FallbackTopic":"cmnd/DVES_63AC89_fb/","GroupTopic":"sonoffs"}
19:02:09 MQT: tele/sonoff/INFO2 = {"WebServerMode":"Admin","Hostname":"sonoff-3209","IPAddress":"192.168.178.45"}
19:02:09 MQT: tele/sonoff/INFO3 = {"RestartReason":"Software/System restart"}
19:02:09 MQT: stat/sonoff/RESULT = {"POWER":"ON"}
19:02:09 MQT: stat/sonoff/POWER = ON
19:02:17 RSL: tele/sonoff/STATE = {"Time":"2019-08-11T19:02:17","Uptime":"0T00:00:14","Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"POWER":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box 7490","BSSId":"34:31:C4:38:A0:8B","Channel":11,"RSSI":66,"LinkCount":1,"Downtime":"0T00:00:04"}}
19:02:17 RSL: tele/sonoff/SENSOR = {"Time":"2019-08-11T19:02:17","SML":{"Total_in":1635.4017,"Total_out":17788.1531,"Power_curr":369,"Meter_number":"0649534b011073747990"}}

sonoff.0	2019-08-11 20:06:01.376	debug	Client [DVES_63AC89] pingreq
sonoff.0	2019-08-11 20:05:46.359	debug	Client [DVES_63AC89] pingreq
sonoff.0	2019-08-11 20:05:31.314	debug	Client [DVES_63AC89] pingreq
sonoff.0	2019-08-11 20:05:16.272	debug	Client [DVES_63AC89] pingreq
sonoff.0	2019-08-11 20:05:01.253	debug	Client [DVES_63AC89] pingreq
sonoff.0	2019-08-11 20:04:46.252	debug	Client [DVES_63AC89] pingreq
sonoff.0	2019-08-11 20:04:31.241	debug	Client [DVES_63AC89] pingreq
sonoff.0	2019-08-11 20:04:16.238	debug	stateChange sonoff.0.DVES_63AC89.POWER: {"val":false,"ack":true,"ts":1565546656230,"q":0,"from":"system.adapter.sonoff.0","user":"system.user.admin","lc":1565546656230}
sonoff.0	2019-08-11 20:04:16.221	debug	[DVES_63AC89] Received: cmnd/sonoff/POWER =
sonoff.0	2019-08-11 20:04:16.212	debug	stateChange sonoff.0.DVES_63AC89.alive: {"val":true,"ack":true,"ts":1565546656209,"q":0,"from":"system.adapter.sonoff.0","user":"system.user.admin","lc":1565546656209}
sonoff.0	2019-08-11 20:04:16.168	debug	stateChange sonoff.0.info.connection: {"val":"DVES_63AC89","ack":true,"ts":1565546656155,"q":0,"from":"system.adapter.sonoff.0","user":"system.user.admin","lc":1565546656155}
sonoff.0	2019-08-11 20:04:16.002	info	Client [DVES_63AC89] connected with secret 1565546655989_8845
sonoff.0	2019-08-11 20:04:07.536	debug	stateChange sonoff.0.DVES_63AC89.alive: {"val":false,"ack":true,"ts":1565546647532,"q":0,"from":"system.adapter.sonoff.0","user":"system.user.admin","lc":1565546643666}
sonoff.0	2019-08-11 20:04:07.469	debug	stateChange sonoff.0.info.connection: {"val":"","ack":true,"ts":1565546647461,"q":0,"from":"system.adapter.sonoff.0","user":"system.user.admin","lc":1565546647461}
sonoff.0	2019-08-11 20:04:07.429	info	Starting MQTT authenticated server on port 1882
sonoff.0	2019-08-11 20:04:07.349	info	starting. Version 2.2.2 in /opt/iobroker/node_modules/iobroker.sonoff, node: v10.16.2
sonoff.0	2019-08-11 20:04:07.306	debug	statesDB connected
sonoff.0	2019-08-11 20:04:07.258	debug	objectDB connected
host.ioBroker-RasPi4	2019-08-11 20:04:06.190	info	instance system.adapter.sonoff.0 started with pid 22900

Glasfaser

@ecki945

Mach den bitte aktiv .

ecki945

Hab ich. Leider hat sich nicht viel geändert.

00:00:00 CFG: Loaded from flash at 3FB, Count 17
00:00:00 Project sonoff Sonoff Version 6.5.0.16(sonoff)-2_5_2
00:00:00 SNS: Hardware Serial
00:00:00 WIF: Connecting to AP1 FRITZ!Box 7490 in mode 11N as sonoff-3209...
00:00:04 WIF: Connected
00:00:04 HTP: Web server active on sonoff-3209 with IP address 192.168.178.45
19:35:20 MQT: Attempting connection...
19:35:20 MQT: Connected
19:35:20 MQT: tele/sonoff/LWT = Online (retained)
19:35:20 MQT: cmnd/sonoff/POWER = 
19:35:20 RSL: tele/sonoff/INFO1 = {"Module":"Generic","Version":"6.5.0.16(sonoff)","FallbackTopic":"cmnd/DVES_63AC89_fb/","GroupTopic":"sonoffs"}
19:35:20 MQT: tele/sonoff/INFO2 = {"WebServerMode":"Admin","Hostname":"sonoff-3209","IPAddress":"192.168.178.45"}
19:35:20 MQT: tele/sonoff/INFO3 = {"RestartReason":"Software/System restart"}
19:35:28 RSL: tele/sonoff/STATE = {"Time":"2019-08-11T19:35:28","Uptime":"0T00:00:14","Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":21,"Wifi":{"AP":1,"SSId":"FRITZ!Box 7490","BSSId":"34:31:C4:38:A0:8B","Channel":11,"RSSI":66,"LinkCount":1,"Downtime":"0T00:00:04"}}
19:35:28 RSL: tele/sonoff/SENSOR = {"Time":"2019-08-11T19:35:28","SML":{"Total_in":1635.5859,"Total_out":17788.1531,"Power_curr":308,"Meter_number":"0649534b011073747990"}}
19:35:38 RSL: tele/sonoff/STATE = {"Time":"2019-08-11T19:35:38","Uptime":"0T00:00:24","Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"Wifi":{"AP":1,"SSId":"FRITZ!Box 7490","BSSId":"34:31:C4:38:A0:8B","Channel":11,"RSSI":66,"LinkCount":1,"Downtime":"0T00:00:04"}}
19:35:38 RSL: tele/sonoff/SENSOR = {"Time":"2019-08-11T19:35:38","SML":{"Total_in":1635.5868,"Total_out":17788.1531,"Power_curr":308,"Meter_number":"0649534b011073747990"}}
19:35:48 RSL: tele/sonoff/STATE = {"Time":"2019-08-11T19:35:48","Uptime":"0T00:00:34","Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"Wifi":{"AP":1,"SSId":"FRITZ!Box 7490","BSSId":"34:31:C4:38:A0:8B","Channel":11,"RSSI":66,"LinkCount":1,"Downtime":"0T00:00:04"}}
19:35:48 RSL: tele/sonoff/SENSOR = {"Time":"2019-08-11T19:35:48","SML":{"Total_in":1635.5876,"Total_out":17788.1531,"Power_curr":308,"Meter_number":"0649534b011073747990"}}
19:35:58 RSL: tele/sonoff/STATE = {"Time":"2019-08-11T19:35:58","Uptime":"0T00:00:44","Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"Wifi":{"AP":1,"SSId":"FRITZ!Box 7490","BSSId":"34:31:C4:38:A0:8B","Channel":11,"RSSI":64,"LinkCount":1,"Downtime":"0T00:00:04"}}
19:35:58 RSL: tele/sonoff/SENSOR = {"Time":"2019-08-11T19:35:58","SML":{"Total_in":1635.5885,"Total_out":17788.1531,"Power_curr":317,"Meter_number":"0649534b011073747990"}}

sonoff.0	2019-08-11 20:37:08.521	debug	Client [DVES_63AC89] pingreq
sonoff.0	2019-08-11 20:37:05.395	debug	system.adapter.admin.0: logging true
sonoff.0	2019-08-11 20:36:56.038	debug	system.adapter.admin.0: logging false
sonoff.0	2019-08-11 20:36:53.487	debug	Client [DVES_63AC89] pingreq
sonoff.0	2019-08-11 20:36:38.487	debug	stateChange sonoff.0.DVES_63AC89.POWER: {"val":false,"ack":true,"ts":1565548598480,"q":0,"from":"system.adapter.sonoff.0","user":"system.user.admin","lc":1565546656230}
sonoff.0	2019-08-11 20:36:38.471	debug	[DVES_63AC89] Received: cmnd/sonoff/POWER =
sonoff.0	2019-08-11 20:36:38.458	debug	stateChange sonoff.0.DVES_63AC89.alive: {"val":true,"ack":true,"ts":1565548598455,"q":0,"from":"system.adapter.sonoff.0","user":"system.user.admin","lc":1565548598455}
sonoff.0	2019-08-11 20:36:38.429	debug	stateChange sonoff.0.info.connection: {"val":"DVES_63AC89","ack":true,"ts":1565548598412,"q":0,"from":"system.adapter.sonoff.0","user":"system.user.admin","lc":1565548598412}
sonoff.0	2019-08-11 20:36:38.239	info	Client [DVES_63AC89] connected with secret 1565548598211_1404
sonoff.0	2019-08-11 20:36:27.262	debug	stateChange sonoff.0.DVES_63AC89.alive: {"val":false,"ack":true,"ts":1565548587259,"q":0,"from":"system.adapter.sonoff.0","user":"system.user.admin","lc":1565548583399}
sonoff.0	2019-08-11 20:36:27.220	debug	stateChange sonoff.0.info.connection: {"val":"","ack":true,"ts":1565548587206,"q":0,"from":"system.adapter.sonoff.0","user":"system.user.admin","lc":1565548587206}
sonoff.0	2019-08-11 20:36:27.191	info	Starting MQTT authenticated server on port 1882
sonoff.0	2019-08-11 20:36:27.113	info	starting. Version 2.2.2 in /opt/iobroker/node_modules/iobroker.sonoff, node: v10.16.2
sonoff.0	2019-08-11 20:36:27.067	debug	statesDB connected
sonoff.0	2019-08-11 20:36:27.015	debug	objectDB connected

Ich glaube da hat sich grundsätzlich nicht viel geändert.

Glasfaser

@ecki945

Hast du auch den Sonoff Adapter neu gestartet !?

ecki945

@Jan1 Deine Angaben sind nicht ganz korrekt:
Nach dem Linken und Compilieren seh ich ja den "Speicherverbrauch":

Der Sketch verwendet 585864 Bytes (56%) des Programmspeicherplatzes. Das Maximum sind 1044464 Bytes.
Globale Variablen verwenden 49864 Bytes (60%) des dynamischen Speichers, 32056 Bytes für lokale Variablen verbleiben. Das Maximum sind 81920 Bytes.

ecki945

@Glasfaser

Ja Natürlich. Beide neu gestartet.

Glasfaser

@ecki945

Flash du ein fertige "bin " Datei ?

ecki945

Nein. Selber compilieren. Aber wie schon geschrieben im original code nur die notwendigen defines anpassen.

Glasfaser

@ecki945

Ahh .. schon mal ein ganz anderes Thema.

Habe es auch mal versucht , aber mit fertigen bin war ich immer auf der richtigen Seite ,
Da bin leider raus , aber Suche mal nach subscribe mqtt.

Community Forum

NEWS

MQTT und Tasmota

Support us

329

32.7k

82.5k

1.3m