Ich habe den Adapter vor ein paar Tagen installiert und ich muss sagen: er funktioniert. Ich kann so einiges auslesen (mir geht es um die Ladestatistik). Kommandos zu senden habe ich noch nicht ausprobiert.
Der Adapter scheint auch gepflegt zu werden: letztes Commit ist von Ende letzter Woche im Github. Keine Ahnung, warum der Adapter nicht im ioBroker Stable ist.
@thomas-braun Okay. Ich gebe nach 
Backups der Daten, JS, und NodeRed Flows sind vorhanden, habe trotzdem ein wenig Angst, dass das ganze nachher auch wieder so schön läuft wie vorher bzw. ich beim neu Aufsetzen irgendwo scheitere. Ich steuere/überwache hier die Stromflüsse und Heizungen im Haus über IOB. Es gibt Failsave-Modi, daher kein "wirkliches" Problem.
@thomas-braun das stimmt, aber ich möchte gerne das nutzen was ich hier habe (wenn es denn eben ausreicht) und für die Software, die ich laufen lasse, sollte doch auch ein 32 bit OS absolut ausreichen.
Du siehst keine Chance, das System zu retten?
@thomas-braun Ich mache mir eher Sorgen wg. meinem Limit von 1 GB RAM. Ich gehe davon aus, dass die 64bit Version etwas mehr RAM benötigt als die 32bit Version. Bei mir läuft zwar nur IOB und Samba, aber etwas Reserve ist mir schon lieb.
@thomas-braun Ich habe ein regelbares Netzteil von Meanwell im Einsatz und das auch vorhin mal etwas hochgedreht. Du meinst ich komme um eine Neuinstallation nicht herum? Wenn, dann werde ich aber gerne bei der 32 bit Version und meinem 1GB RPi 3 bleiben wollen, da so solide auf der Hutschiene verbaut.
@mcm1957 Danke fürs draufschauen. Am Netzteil sollte das doch nicht liegen, zumal das System jetzt zwei Jahre in diese Hardware-Konfiguration sehr gut lief. Nach Adapterupdates ist das Problem aufgetaucht.
Hallo zusammen,
Nachdem nun meine ioBroker Installation seit gut zwei Jahren recht problemlos auf meinem Raspberry PI 3b lief, habe ich nun massive Probleme nach Adapterupdates.
So sieht mein Log aus und das wieder holt sich so auf ewig.
2024-10-02 21:10:20.834 - info: host.raspberrypi received SIGTERM
2024-10-02 21:10:21.004 - info: host.raspberrypi terminated. Could not reset alive status for instances
2024-10-02 21:10:38.469 - info: host.raspberrypi iobroker.js-controller version 6.0.11 js-controller starting
2024-10-02 21:10:38.480 - info: host.raspberrypi Copyright (c) 2014-2024 bluefox, 2014 hobbyquaker
2024-10-02 21:10:38.481 - info: host.raspberrypi hostname: raspberrypi, node: v20.17.0
2024-10-02 21:10:38.483 - info: host.raspberrypi ip addresses: 192.168.178.84 2003:dc:d723:aa00:a86b:fc4a:ae7b:bb4 fe80::85b9:f7dd:e95f:f45c
2024-10-02 21:10:38.635 - warn: host.raspberrypi-Server Objects 127.0.0.1:49638 Error from InMemDB: Error: auth NOT SUPPORTED
at RedisHandler._handleCommand (file:///opt/iobroker/node_modules/@iobroker/db-base/build/esm/lib/redisHandler.js:141:40)
at Resp.<anonymous> (file:///opt/iobroker/node_modules/@iobroker/db-base/build/esm/lib/redisHandler.js:59:45)
at Resp.emit (node:events:519:28)
at Resp.write (/opt/iobroker/node_modules/respjs/index.js:129:12)
at Socket.<anonymous> (file:///opt/iobroker/node_modules/@iobroker/db-base/build/esm/lib/redisHandler.js:69:23)
at Socket.emit (node:events:519:28)
at addChunk (node:internal/streams/readable:559:12)
at readableAddChunkPushByteMode (node:internal/streams/readable:510:3)
at Readable.push (node:internal/streams/readable:390:5)
at TCP.onStreamRead (node:internal/stream_base_commons:191:23)
2024-10-02 21:11:37.195 - error: host.raspberrypi No connection to databases possible, restart
2024-10-02 21:11:37.221 - info: host.raspberrypi iobroker _restart
2024-10-02 21:11:45.797 - info: host.raspberrypi iobroker.js-controller version 6.0.11 js-controller starting
2024-10-02 21:11:45.808 - info: host.raspberrypi Copyright (c) 2014-2024 bluefox, 2014 hobbyquaker
2024-10-02 21:11:45.809 - info: host.raspberrypi hostname: raspberrypi, node: v20.17.0
2024-10-02 21:11:45.811 - info: host.raspberrypi ip addresses: 192.168.178.84 2003:dc:d723:aa00:a86b:fc4a:ae7b:bb4 fe80::85b9:f7dd:e95f:f45c
2024-10-02 21:11:45.945 - warn: host.raspberrypi-Server Objects 127.0.0.1:59836 Error from InMemDB: Error: auth NOT SUPPORTED
at RedisHandler._handleCommand (file:///opt/iobroker/node_modules/@iobroker/db-base/build/esm/lib/redisHandler.js:141:40)
at Resp.<anonymous> (file:///opt/iobroker/node_modules/@iobroker/db-base/build/esm/lib/redisHandler.js:59:45)
at Resp.emit (node:events:519:28)
at Resp.write (/opt/iobroker/node_modules/respjs/index.js:129:12)
at Socket.<anonymous> (file:///opt/iobroker/node_modules/@iobroker/db-base/build/esm/lib/redisHandler.js:69:23)
at Socket.emit (node:events:519:28)
at addChunk (node:internal/streams/readable:559:12)
at readableAddChunkPushByteMode (node:internal/streams/readable:510:3)
at Readable.push (node:internal/streams/readable:390:5)
at TCP.onStreamRead (node:internal/stream_base_commons:191:23)
Ein Systemupdate habe ich bereits ausgeführt ("sudo apt-get update" und "sudo apt-get upgrade" gefolgt von "sudo apt-get autoremove"). Das läuft ohne Probleme durch.
Ein "iob fix" hat nicht geholfen. Mehrfaches Rebooten auch nicht.
iob diag liefert folgendes:
Skript v.2024-08-12
*** BASE SYSTEM ***
Static hostname: raspberrypi
Icon name: computer
Operating System: Raspbian GNU/Linux 11 (bullseye)
Kernel: Linux 6.1.21-v7+
Architecture: arm
OS is similar to: debian
Model : Raspberry Pi 3 Model B Plus Rev 1.3
Docker : false
Virtualization : none
Kernel : armv7l
Userland : 32 bit
Systemuptime and Load:
20:59:23 up 27 min, 2 users, load average: 0.51, 0.93, 0.71
CPU threads: 4
*** RASPBERRY THROTTLING ***
Current issues:
~ Under-voltage detected
Previously detected issues:
~ Under-voltage has occurred
*** Time and Time Zones ***
Local time: Wed 2024-10-02 20:59:24 CEST
Universal time: Wed 2024-10-02 18:59:24 UTC
RTC time: n/a
Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
NTP service: active
RTC in local TZ: no
*** Users and Groups ***
User that called 'iob diag':
ulli
HOME=/home/ulli
GROUPS=ulli adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker
User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c
*** Display-Server-Setup ***
Display-Server: false
Desktop:
Terminal: tty
Boot Target: multi-user.target
*** MEMORY ***
total used free shared buff/cache available
Mem: 922M 98M 74M 1.0M 749M 757M
Swap: 99M 1.0M 98M
Total: 1.0G 99M 173M
Active iob-Instances: 0
922 M total memory
98 M used memory
333 M active memory
382 M inactive memory
74 M free memory
190 M buffer memory
559 M swap cache
99 M total swap
1 M used swap
98 M free swap
*** top - Table Of Processes ***
top - 20:59:24 up 27 min, 2 users, load average: 0.51, 0.93, 0.71
Tasks: 136 total, 1 running, 135 sleeping, 0 stopped, 0 zombie
%Cpu(s): 0.0 us, 2.9 sy, 0.0 ni, 97.1 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st
MiB Mem : 922.3 total, 74.3 free, 98.2 used, 749.8 buff/cache
MiB Swap: 100.0 total, 99.0 free, 1.0 used. 758.4 avail Mem
*** FAILED SERVICES ***
UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.
*** FILESYSTEM ***
Filesystem Type Size Used Avail Use% Mounted on
/dev/root ext4 27G 11G 15G 42% /
devtmpfs devtmpfs 429M 0 429M 0% /dev
tmpfs tmpfs 462M 0 462M 0% /dev/shm
tmpfs tmpfs 185M 1.9M 183M 1% /run
tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock
/dev/mmcblk0p6 vfat 253M 51M 202M 20% /boot
tmpfs tmpfs 93M 20K 93M 1% /run/user/1000
Messages concerning ext4 filesystem in dmesg:
[Wed Oct 2 20:31:52 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 fsck.repair=yes rootwait
[Wed Oct 2 20:31:56 2024] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Quota mode: none.
[Wed Oct 2 20:31:56 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:7.
[Wed Oct 2 20:32:00 2024] EXT4-fs (mmcblk0p7): re-mounted. Quota mode: none.
Show mounted filesystems:
TARGET SOURCE FSTYPE OPTIONS
/ /dev/mmcblk0p7 ext4 rw,noatime
`-/boot /dev/mmcblk0p6 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro
Files in neuralgic directories:
/var:
2.3G /var/
1.1G /var/log/journal/dc6f242a0db443ce92b468f9abbf9ea6
1.1G /var/log/journal
1.1G /var/log
908M /var/cache
Archived and active journals take up 1.0G in the file system.
/opt/iobroker/backups:
29M /opt/iobroker/backups/
/opt/iobroker/iobroker-data:
837M /opt/iobroker/iobroker-data/
581M /opt/iobroker/iobroker-data/files
441M /opt/iobroker/iobroker-data/files/javascript.admin
409M /opt/iobroker/iobroker-data/files/javascript.admin/static
408M /opt/iobroker/iobroker-data/files/javascript.admin/static/js
The five largest files in iobroker-data are:
24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map
22M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.18496c94.js.map
14M /opt/iobroker/iobroker-data/files/backitup.admin/static/js/main.2cca4954.js
9.0M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.18496c94.js
8.7M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/838.0aa41cb0.chunk.js.map
USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':
/dev/serial/by-id/usb-1a86_USB2.0-Ser_-if00-port0
*** NodeJS-Installation ***
/usr/bin/nodejs v20.17.0
/usr/bin/node v20.17.0
/usr/bin/npm 10.8.2
/usr/bin/npx 10.8.2
/usr/bin/corepack 0.29.3
nodejs:
Installed: 20.17.0-1nodesource1
Candidate: 20.17.0-1nodesource1
Version table:
*** 20.17.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
100 /var/lib/dpkg/status
20.16.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
20.15.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
20.15.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
20.14.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
20.13.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
20.13.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
20.12.2-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
20.12.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
20.12.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
20.11.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
20.11.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
20.10.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
20.9.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
20.8.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
20.8.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
20.7.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
20.6.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
20.6.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
20.5.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
20.5.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
20.4.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
20.3.1-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
20.3.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
20.2.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
20.1.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
20.0.0-1nodesource1 1001
500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
12.22.12~dfsg-1~deb11u5 500
500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages
Temp directories causing npm8 problem: 0
No problems detected
Errors in npm tree:
*** ioBroker-Installation ***
ioBroker Status
Unable to increase LUA script timeout: Error auth NOT SUPPORTED
Cannot determine Set feature status: Connection is closed.
Server Objects 127.0.0.1:50972 Error from InMemDB: Error: auth NOT SUPPORTED
at RedisHandler._handleCommand (file:///opt/iobroker/node_modules/@iobroker/db-base/build/esm/lib/redisHandler.js:141:40)
at Resp.<anonymous> (file:///opt/iobroker/node_modules/@iobroker/db-base/build/esm/lib/redisHandler.js:59:45)
at Resp.emit (node:events:519:28)
at Resp.write (/opt/iobroker/node_modules/respjs/index.js:129:12)
at Socket.<anonymous> (file:///opt/iobroker/node_modules/@iobroker/db-base/build/esm/lib/redisHandler.js:69:23)
at Socket.emit (node:events:519:28)
at addChunk (node:internal/streams/readable:559:12)
at readableAddChunkPushByteMode (node:internal/streams/readable:510:3)
at Readable.push (node:internal/streams/readable:390:5)
at TCP.onStreamRead (node:internal/stream_base_commons:191:23)
No connection to databases possible ...
Core adapters versions
js-controller: 6.0.11
admin: 7.1.5
javascript: 8.7.6
nodejs modules from github: 0
Adapter State
Server Objects 127.0.0.1:39744 Error from InMemDB: Error: auth NOT SUPPORTED
at RedisHandler._handleCommand (file:///opt/iobroker/node_modules/@iobroker/db-base/build/esm/lib/redisHandler.js:141:40)
at Resp.<anonymous> (file:///opt/iobroker/node_modules/@iobroker/db-base/build/esm/lib/redisHandler.js:59:45)
at Resp.emit (node:events:519:28)
at Resp.write (/opt/iobroker/node_modules/respjs/index.js:129:12)
at Socket.<anonymous> (file:///opt/iobroker/node_modules/@iobroker/db-base/build/esm/lib/redisHandler.js:69:23)
at Socket.emit (node:events:519:28)
at addChunk (node:internal/streams/readable:559:12)
at readableAddChunkPushByteMode (node:internal/streams/readable:510:3)
at Readable.push (node:internal/streams/readable:390:5)
at TCP.onStreamRead (node:internal/stream_base_commons:191:23)
No connection to databases possible ...
Enabled adapters with bindings
ioBroker-Repositories
Unable to increase LUA script timeout: Error auth NOT SUPPORTED
Cannot determine Set feature status: Connection is closed.
Server Cannot start inMem-objects on port 9001: Failed to lock DB file "/opt/iobroker/node_modules/iobroker.js-controller/admin/objects.jsonl"!
Installed ioBroker-Instances
Unable to increase LUA script timeout: Error auth NOT SUPPORTED
Cannot determine Set feature status: Connection is closed.
Server Objects 127.0.0.1:48412 Error from InMemDB: Error: auth NOT SUPPORTED
at RedisHandler._handleCommand (file:///opt/iobroker/node_modules/@iobroker/db-base/build/esm/lib/redisHandler.js:141:40)
at Resp.<anonymous> (file:///opt/iobroker/node_modules/@iobroker/db-base/build/esm/lib/redisHandler.js:59:45)
at Resp.emit (node:events:519:28)
at Resp.write (/opt/iobroker/node_modules/respjs/index.js:129:12)
at Socket.<anonymous> (file:///opt/iobroker/node_modules/@iobroker/db-base/build/esm/lib/redisHandler.js:69:23)
at Socket.emit (node:events:519:28)
at addChunk (node:internal/streams/readable:559:12)
at readableAddChunkPushByteMode (node:internal/streams/readable:510:3)
at Readable.push (node:internal/streams/readable:390:5)
at TCP.onStreamRead (node:internal/stream_base_commons:191:23)
No connection to databases possible ...
Objects and States
Please stand by - This may take a while
Objects: 1
States: 3
*** OS-Repositories and Updates ***
Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:3 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
Pending Updates: 0
*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 13721 473/sshd: /usr/sbin
tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 13852 617/smbd
tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 13851 617/smbd
tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 26565 4155/iobroker.js-co
tcp6 0 0 :::22 :::* LISTEN 0 13723 473/sshd: /usr/sbin
tcp6 0 0 :::139 :::* LISTEN 0 13850 617/smbd
tcp6 0 0 :::4369 :::* LISTEN 0 11879 1/init
tcp6 0 0 :::445 :::* LISTEN 0 13849 617/smbd
udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 611 338/avahi-daemon: r
udp 0 0 0.0.0.0:68 0.0.0.0:* 0 13679 435/dhcpcd
udp 0 0 0.0.0.0:51308 0.0.0.0:* 108 613 338/avahi-daemon: r
udp 0 0 192.168.178.255:137 0.0.0.0:* 0 12075 459/nmbd
udp 0 0 192.168.178.84:137 0.0.0.0:* 0 12074 459/nmbd
udp 0 0 0.0.0.0:137 0.0.0.0:* 0 12035 459/nmbd
udp 0 0 192.168.178.255:138 0.0.0.0:* 0 12077 459/nmbd
udp 0 0 192.168.178.84:138 0.0.0.0:* 0 12076 459/nmbd
udp 0 0 0.0.0.0:138 0.0.0.0:* 0 12036 459/nmbd
udp6 0 0 :::5353 :::* 108 612 338/avahi-daemon: r
udp6 0 0 :::546 :::* 0 13734 435/dhcpcd
udp6 0 0 :::58522 :::* 108 614 338/avahi-daemon: r
*** Log File - Last 25 Lines ***
at Resp.emit (node:events:519:28)
at Resp.write (/opt/iobroker/node_modules/respjs/index.js:129:12)
at Socket.<anonymous> (file:///opt/iobroker/node_modules/@iobroker/db-base/build/esm/lib/redisHandler.js:69:23)
at Socket.emit (node:events:519:28)
at addChunk (node:internal/streams/readable:559:12)
at readableAddChunkPushByteMode (node:internal/streams/readable:510:3)
at Readable.push (node:internal/streams/readable:390:5)
at TCP.onStreamRead (node:internal/stream_base_commons:191:23)
2024-10-02 21:06:19.387 - error: host.raspberrypi No connection to databases possible, restart
2024-10-02 21:06:19.412 - info: host.raspberrypi iobroker _restart
2024-10-02 21:06:27.855 - info: host.raspberrypi iobroker.js-controller version 6.0.11 js-controller starting
2024-10-02 21:06:27.866 - info: host.raspberrypi Copyright (c) 2014-2024 bluefox, 2014 hobbyquaker
2024-10-02 21:06:27.868 - info: host.raspberrypi hostname: raspberrypi, node: v20.17.0
2024-10-02 21:06:27.870 - info: host.raspberrypi ip addresses: 192.168.178.84 2003:dc:d723:aa00:a86b:fc4a:ae7b:bb4 fe80::85b9:f7dd:e95f:f45c
2024-10-02 21:06:28.021 - warn: host.raspberrypi-Server Objects 127.0.0.1:42154 Error from InMemDB: Error: auth NOT SUPPORTED
at RedisHandler._handleCommand (file:///opt/iobroker/node_modules/@iobroker/db-base/build/esm/lib/redisHandler.js:141:40)
at Resp.<anonymous> (file:///opt/iobroker/node_modules/@iobroker/db-base/build/esm/lib/redisHandler.js:59:45)
at Resp.emit (node:events:519:28)
at Resp.write (/opt/iobroker/node_modules/respjs/index.js:129:12)
at Socket.<anonymous> (file:///opt/iobroker/node_modules/@iobroker/db-base/build/esm/lib/redisHandler.js:69:23)
at Socket.emit (node:events:519:28)
at addChunk (node:internal/streams/readable:559:12)
at readableAddChunkPushByteMode (node:internal/streams/readable:510:3)
at Readable.push (node:internal/streams/readable:390:5)
at TCP.onStreamRead (node:internal/stream_base_commons:191:23)
Mit der Summary:
======================= SUMMARY =======================
v.2024-08-12
Terminal: tty
Boot Target: multi-user.target
*** MEMORY ***
total used free shared buff/cache available
Mem: 922M 98M 74M 1.0M 749M 757M
Swap: 99M 1.0M 98M
Total: 1.0G 99M 173M
Active iob-Instances: 0
922 M total memory
98 M used memory
333 M active memory
382 M inactive memory
74 M free memory
190 M buffer memory
559 M swap cache
99 M total swap
1 M used swap
98 M free swap
*** top - Table Of Processes ***
top - 20:59:24 up 27 min, 2 users, load average: 0.51, 0.93, 0.71
Tasks: 136 total, 1 running, 135 sleeping, 0 stopped, 0 zombie
%Cpu(s): 0.0 us, 2.9 sy, 0.0 ni, 97.1 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st
MiB Mem : 922.3 total, 74.3 free, 98.2 used, 749.8 buff/cache
MiB Swap: 100.0 total, 99.0 free, 1.0 used. 758.4 avail Mem
*** FAILED SERVICES ***
UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.
*** FILESYSTEM ***
Filesystem Type Size Used Avail Use% Mounted on
/dev/root ext4 27G 11G 15G 42% /
devtmpfs devtmpfs 429M 0 429M 0% /dev
tmpfs tmpfs 462M 0 462M 0% /dev/shm
tmpfs tmpfs 185M 1.9M 183M 1% /run
tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock
/dev/mmcblk0p6 vfat 253M 51M 202M 20% /boot
tmpfs tmpfs 93M 20K 93M 1% /run/user/1000
Messages concerning ext4 filesystem in dmesg:
[Wed Oct 2 20:31:52 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 fsck.repair=yes rootwait
[Wed Oct 2 20:31:56 2024] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Quota mode: none.
[Wed Oct 2 20:31:56 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:7.
[Wed Oct 2 20:32:00 2024] EXT4-fs (mmcblk0p7): re-mounted. Quota mode: none.
Show mounted filesystems:
TARGET SOURCE FSTYPE OPTIONS
/ /dev/mmcblk0p7 ext4 rw,noatime
`-/boot /dev/mmcblk0p6 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro
Files in neuralgic directories:
/var:
2.3G /var/
1.1G /var/log/journal/dc6f242a0db443ce92b468f9abbf9ea6
1.1G /var/log/journal
1.1G /var/log
908M /var/cache
Archived and active journals take up 1.0G in the fil Static hostname: raspberrypi
Icon name: computer
Operating System: Raspbian GNU/Linux 11 (bullseye)
Kernel: Linux 6.1.21-v7+
Architecture: arm
Installation: native
Kernel: armv7l
Userland: 32 bit
Timezone: Europe/Berlin (CEST, +0200)
User-ID: 1000
Display-Server: false
Boot Target: multi-user.target
Pending OS-Updates: 0
Ich würde mich wirklich über etwas Hilfe freuen. Ich bin nicht ganz unbedarft, was Computer und Elektronik angeht, komme hier jedoch gerade massiv an meine Grenzen.
Grüße
Ulli
