Nun gehöre ich auch nicht zu den Menschen, die schon wahnsinnig oft Immobilien ge- oder verkauft haben. Aber meiner Erfahrung nach werden bei der Übergabe die Zählerstände ausgetauscht und sofort eine Ummeldung ausgelöst. Das dürfte ja im Interesse aller Parteien sein.
Ja, da gebe ich dir ja Recht (ginge mir auch so), aber die Praxis sieht nunmal leider anders aus. Wie gesagt, mehrere Wochen oder Monate sind da kein Einzelfall.

Und ja, das Thema Wasserschaden ist ein Problem. Zumindest bei uns ist geplant, mindestens alle 3 Monate komplett auszulesen und die Eigentümer mit Leckagemeldung anzuschreiben (die ersten hatten wir schon gleich bei der Testauslesung nach Inbetriebnahme). Das ist natürlich keine Echtzeitüberwachung, aber besser als wenn man das ganze erst mit den großen Zahlen auf der Wasserrechnung bemerkt. Eine komplette Auslesung liegt bei uns bei ca. einem Arbeitstag, personell ist da dann leider auch nicht mehr als alle paar Monate drin.

Ich will hier nicht den Datenschutz schlecht reden, der ist richtig und wichtig, aber leider steht er in vielen Dingen einer sinnvollen Arbeit entgegen. Oder man bewegt sich in einer Grauzone in der man nie genau weiß was bei einer Klage passiert...

@sborg Also wenn ich das richtig in Erinnerung habe sind in den Zählern 2 A-Zellen mit 3,6V als Batterie enthalten, die über 15 Jahre funken. Ich gestehe dass ich im Thema Funk & Strahlung nicht so wirklich tief drin bin, aber ich wage doch zu bezweifeln dass mit einer derart geringen Leistung auf die Jahre gesehen eine gesundheitliche Beeinträchtigung herbei geführt wird...

Aber es hat hierzu wohl jeder seine eigene Meinung. Ich persönlich denke dass da die gefühlten 25 WLAN-Netze, die in jedem Wohngebiet strahlen, da ne ganz andere Hausnummer sind.

@andreep Ich versuche auch gerade das ganze auf VIS2 zu implementieren. Funktioniert alles auch soweit, bis auf die Wildcard-Anzeige bei PIN-Eingabe. Wie hast du das hinbekommen?
Und wie kann ich bei "Enter" und "Reset" Symbole zuweisen?

@thomas-braun So, hatte es jetzt mal hinbekommen den Adapter zu installieren indem ich alles andere auf dem iobroker gestoppt hatte. Hatte dann 75% Ram frei und die Installation lief durch - nur um danach zu bemerken, dass nach der Installation mit laufendem echarts nur noch 25% RAM frei waren.
Damit ist echarts erstmal für mich gestorben. Sorry. aber meiner Meinung nach ist da doch ein gravierender Fehler in der Version wenn der im Vergleich zu vorher soviel RAM frisst.

@thomas-braun Na ja, es läuft ewig und endet vermutlich irgendwann im Timeout. Aber mal ehrlich, wenn unter Linux ein Installer 2GB RAM braucht ist am Installer was faul...

@homoran Nach dem Hinweis auf den vollen RAM hatte ich dann etwas aufgeräumt sodass das RAM nur noch zu 45% belegt war. Leider hat das aber keinen Unterschied beim installieren von echarts gemacht - bricht immer wieder beim (vorletzten?) Punkt ab... Es sei denn natürlich gerade dieser Punkt lässt den RAM vollaufen, dann hätte ich wohl gelitten. Mehr RAM is nicht...

@thomas-braun Kein Problem

Skript v.2023-04-16

*** BASE SYSTEM ***
Architecture    : x86_64
Docker          : false
Virtualization  : microsoft
Distributor ID: Ubuntu
Description:    Ubuntu 22.04.2 LTS
Release:        22.04
Codename:       jammy

PRETTY_NAME="Ubuntu 22.04.2 LTS"
NAME="Ubuntu"
VERSION_ID="22.04"
VERSION="22.04.2 LTS (Jammy Jellyfish)"
VERSION_CODENAME=jammy
ID=ubuntu
ID_LIKE=debian
HOME_URL="https://www.ubuntu.com/"
SUPPORT_URL="https://help.ubuntu.com/"
BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/"
PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy"
UBUNTU_CODENAME=jammy

Systemuptime and Load:
 18:51:59 up  3:56,  3 users,  load average: 13.50, 20.44, 12.48
CPU threads: 2


*** Time and Time Zones ***
               Local time: Sun 2023-07-02 18:52:06 CEST
           Universal time: Sun 2023-07-02 16:52:06 UTC
                 RTC time: Sun 2023-07-02 16:52:06
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
marco
/home/marco
marco adm cdrom sudo dip plugdev lxd iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.9G        3.6G        131M        0.0K        221M        128M
Swap:           3.0G        1.2G        1.8G
Total:          6.9G        4.7G        1.9G

         3911 M total memory
         3559 M used memory
          511 M active memory
         3007 M inactive memory
          131 M free memory
           14 M buffer memory
          206 M swap cache
         2981 M total swap
         1181 M used swap
         1800 M free swap

*** FILESYSTEM ***
Filesystem                        Type   Size  Used Avail Use% Mounted on
tmpfs                             tmpfs  392M  1.1M  391M   1% /run
/dev/mapper/ubuntu--vg-ubuntu--lv ext4    44G   17G   25G  40% /
tmpfs                             tmpfs  2.0G     0  2.0G   0% /dev/shm
tmpfs                             tmpfs  5.0M     0  5.0M   0% /run/lock
/dev/sda2                         ext4   2.0G  253M  1.6G  14% /boot
tmpfs                             tmpfs  392M  4.0K  392M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sun Jul  2 14:55:32 2023] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[Sun Jul  2 14:55:41 2023] EXT4-fs (dm-0): re-mounted. Opts: (null). Quota mode: none.
[Sun Jul  2 14:55:52 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.

Show mounted filesystems (real ones only):
TARGET              SOURCE                            FSTYPE   OPTIONS
/                   /dev/mapper/ubuntu--vg-ubuntu--lv ext4     rw,relatime
|-/snap/core20/1891 /dev/loop0                        squashfs ro,nodev,relatime,errors=continue
|-/snap/core20/1950 /dev/loop1                        squashfs ro,nodev,relatime,errors=continue
|-/snap/lxd/23541   /dev/loop2                        squashfs ro,nodev,relatime,errors=continue
|-/snap/lxd/24322   /dev/loop3                        squashfs ro,nodev,relatime,errors=continue
|-/snap/snapd/19457 /dev/loop5                        squashfs ro,nodev,relatime,errors=continue
|-/snap/snapd/19361 /dev/loop4                        squashfs ro,nodev,relatime,errors=continue
`-/boot             /dev/sda2                         ext4     rw,relatime

Files in neuralgic directories:

/var:
5.7G    /var/
4.3G    /var/log
4.1G    /var/log/journal/ecc0962cbac84c6e9c5fef27b0505515
4.1G    /var/log/journal
1.1G    /var/lib

Archived and active journals take up 4.0G in the file system.

/opt/iobroker/backups:
24M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
360M    /opt/iobroker/iobroker-data/
266M    /opt/iobroker/iobroker-data/files
88M     /opt/iobroker/iobroker-data/files/echarts.admin
52M     /opt/iobroker/iobroker-data/files/javascript.admin
40M     /opt/iobroker/iobroker-data/backup-objects

The five largest files in iobroker-data are:
27M     /opt/iobroker/iobroker-data/states.jsonl
24M     /opt/iobroker/iobroker-data/objects.jsonl
23M     /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.7952f0f7.js.map
23M     /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.eb0afecd.js.map
17M     /opt/iobroker/iobroker-data/files/echarts.admin/preview/static/js/main.1b04901d.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.16.1
/usr/bin/node           v18.16.1
/usr/bin/npm            9.5.1
/usr/bin/npx            9.5.1


nodejs:
  Installed: 18.16.1-deb-1nodesource1
  Candidate: 18.16.1-deb-1nodesource1
  Version table:
 *** 18.16.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x jammy/main amd64 Packages
        100 /var/lib/dpkg/status
     12.22.9~dfsg-1ubuntu3 500
        500 http://de.archive.ubuntu.com/ubuntu jammy/universe amd64 Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.3.5
javascript:     7.0.3

Adapters from github:   1

Adapter State
  system.adapter.accuweather.0            : accuweather           : iobrokerserver                           - disabled
+ system.adapter.admin.0                  : admin                 : iobrokerserver                           -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : iobrokerserver                           -  enabled
  system.adapter.botvac.0                 : botvac                : iobrokerserver                           - disabled
  system.adapter.daswetter.0              : daswetter             : iobrokerserver                           -  enabled
+ system.adapter.discovery.0              : discovery             : iobrokerserver                           -  enabled
+ system.adapter.energiefluss.0           : energiefluss          : iobrokerserver                           -  enabled
  system.adapter.flot.0                   : flot                  : iobrokerserver                           - disabled
+ system.adapter.fritzdect.0              : fritzdect             : iobrokerserver                           -  enabled
+ system.adapter.fronius-solarweb.0       : fronius-solarweb      : iobrokerserver                           -  enabled
+ system.adapter.fronius.0                : fronius               : iobrokerserver                           -  enabled
+ system.adapter.history.0                : history               : iobrokerserver                           -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : iobrokerserver                           -  enabled
  system.adapter.hm-rpc.0                 : hm-rpc                : iobrokerserver                           - disabled, port: 0
  system.adapter.hm-rpc.1                 : hm-rpc                : iobrokerserver                           - disabled, port: 12001
+ system.adapter.hm-rpc.2                 : hm-rpc                : iobrokerserver                           -  enabled, port: 12010
+ system.adapter.hm-rpc.3                 : hm-rpc                : iobrokerserver                           -  enabled, port: 12010
+ system.adapter.hm-rpc.4                 : hm-rpc                : iobrokerserver                           -  enabled, port: 0
  system.adapter.ical.0                   : ical                  : iobrokerserver                           -  enabled
  system.adapter.icons-icons8.0           : icons-icons8          : iobrokerserver                           -  enabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : iobrokerserver                           -  enabled
  system.adapter.icons-ultimate-png.0     : icons-ultimate-png    : iobrokerserver                           -  enabled
+ system.adapter.influxdb.0               : influxdb              : iobrokerserver                           -  enabled, port: 8086
+ system.adapter.javascript.0             : javascript            : iobrokerserver                           -  enabled
+ system.adapter.linux-control.0          : linux-control         : iobrokerserver                           -  enabled
+ system.adapter.meross.0                 : meross                : iobrokerserver                           -  enabled
  system.adapter.net-tools.0              : net-tools             : iobrokerserver                           - disabled
  system.adapter.openweathermap.0         : openweathermap        : iobrokerserver                           - disabled
+ system.adapter.ping.0                   : ping                  : iobrokerserver                           -  enabled
  system.adapter.socketio.0               : socketio              : iobrokerserver                           - disabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.statistics.0             : statistics            : iobrokerserver                           -  enabled
+ system.adapter.tankerkoenig.0           : tankerkoenig          : iobrokerserver                           -  enabled
+ system.adapter.tr-064.0                 : tr-064                : iobrokerserver                           -  enabled
+ system.adapter.trashschedule.0          : trashschedule         : iobrokerserver                           -  enabled
  system.adapter.vis-bars.0               : vis-bars              : iobrokerserver                           -  enabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : iobrokerserver                           - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : iobrokerserver                           -  enabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : iobrokerserver                           - disabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : iobrokerserver                           -  enabled
  system.adapter.vis-justgage.0           : vis-justgage          : iobrokerserver                           - disabled
  system.adapter.vis-material-advanced.0  : vis-material-advanced : iobrokerserver                           -  enabled
  system.adapter.vis-plumb.0              : vis-plumb             : iobrokerserver                           -  enabled
  system.adapter.vis-rgraph.0             : vis-rgraph            : iobrokerserver                           - disabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : iobrokerserver                           - disabled
  system.adapter.vis-weather.0            : vis-weather           : iobrokerserver                           -  enabled
  system.adapter.vis.0                    : vis                   : iobrokerserver                           -  enabled
+ system.adapter.web.0                    : web                   : iobrokerserver                           -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.web.1                    : web                   : iobrokerserver                           -  enabled, port: 20002, bind: 0.0.0.0, run as: admin
+ system.adapter.ws.0                     : ws                    : iobrokerserver                           -  enabled, port: 8084, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : iobrokerserver                           -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hm-rpc.2                 : hm-rpc                : iobrokerserver                           -  enabled, port: 12010
+ system.adapter.hm-rpc.3                 : hm-rpc                : iobrokerserver                           -  enabled, port: 12010
+ system.adapter.hm-rpc.4                 : hm-rpc                : iobrokerserver                           -  enabled, port: 0
+ system.adapter.influxdb.0               : influxdb              : iobrokerserver                           -  enabled, port: 8086
+ system.adapter.web.0                    : web                   : iobrokerserver                           -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.web.1                    : web                   : iobrokerserver                           -  enabled, port: 20002, bind: 0.0.0.0, run as: admin
+ system.adapter.ws.0                     : ws                    : iobrokerserver                           -  enabled, port: 8084, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "accuweather"  : 1.2.4    , installed 1.2.4
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "backitup"     : 2.6.23   , installed 2.6.23
Adapter    "botvac"       : 1.0.0    , installed 1.0.0
Adapter    "daswetter"    : 3.1.8    , installed 3.1.8
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "echarts"      : 1.5.1    , installed 1.5.1
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "fritzdect"    : 2.3.1    , installed 2.3.1
Adapter    "fronius"      : 1.1.3    , installed 1.1.3
Adapter    "fronius-solarweb": 0.0.3 , installed 0.0.3
Adapter    "history"      : 2.2.4    , installed 2.2.4
Adapter    "hm-rega"      : 3.0.46   , installed 3.0.46
Adapter    "hm-rpc"       : 1.15.18  , installed 1.15.18
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "icons-icons8" : 0.0.1    , installed 0.0.1
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "javascript"   : 7.0.3    , installed 7.0.3
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "linux-control": 1.1.3    , installed 1.1.3
Adapter    "meross"       : 1.15.1   , installed 1.15.1
Adapter    "net-tools"    : 0.2.0    , installed 0.2.0
Adapter    "openweathermap": 0.3.9   , installed 0.3.9
Adapter    "ping"         : 1.5.3    , installed 1.5.3
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "statistics"   : 2.3.0    , installed 2.3.0
Adapter    "tankerkoenig" : 3.3.7    , installed 3.3.7
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "trashschedule": 2.2.0    , installed 2.2.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-bars"     : 0.1.4    , installed 0.1.4
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "vis-icontwo"  : 0.94.0   , installed 0.94.0
Adapter    "vis-inventwo" : 3.3.1    , installed 3.3.1
Adapter    "vis-justgage" : 1.0.2    , installed 1.0.2
Adapter    "vis-material-advanced": 1.7.2, installed 1.7.2
Adapter    "vis-plumb"    : 1.0.2    , installed 1.0.2
Adapter    "vis-rgraph"   : 0.0.2    , installed 0.0.2
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vis-weather"  : 2.5.6    , installed 2.5.6
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0

Objects and States
Please stand by - This may take a while
Objects:        18249
States:         16546

*** OS-Repositories and Updates ***
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian jammy InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: https://packages.grafana.com/oss/deb/dists/stable/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.
W: Failed to fetch https://repos.influxdata.com/debian/dists/jammy/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Some index files failed to download. They have been ignored, or old ones used instead.
Hit:1 http://repository.veeam.com/backup/linux/agent/dpkg/debian/public stable InRelease
Hit:2 http://de.archive.ubuntu.com/ubuntu jammy InRelease
Hit:3 http://de.archive.ubuntu.com/ubuntu jammy-updates InRelease
Hit:4 https://packages.grafana.com/oss/deb stable InRelease
Hit:5 https://deb.nodesource.com/node_18.x jammy InRelease
Get:6 https://repos.influxdata.com/debian jammy InRelease [7037 B]
Get:7 http://de.archive.ubuntu.com/ubuntu jammy-backports InRelease [108 kB]
Hit:8 http://de.archive.ubuntu.com/ubuntu jammy-security InRelease
Err:6 https://repos.influxdata.com/debian jammy InRelease
  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
Fetched 115 kB in 2s (48.8 kB/s)
Reading package lists...
W: https://packages.grafana.com/oss/deb/dists/stable/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian jammy InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Failed to fetch https://repos.influxdata.com/debian/dists/jammy/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Some index files failed to download. They have been ignored, or old ones used instead.
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          21739      806/sshd: /usr/sbin
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          18269      1/init
tcp        0      0 192.168.2.17:12010      0.0.0.0:*               LISTEN      1001       218019     32813/io.hm-rpc.2
tcp        0      0 192.168.2.17:12011      0.0.0.0:*               LISTEN      1001       218043     32828/io.hm-rpc.3
tcp        0      0 127.0.0.53:53           0.0.0.0:*               LISTEN      102        21417      740/systemd-resolve
tcp        0      0 127.0.0.1:10808         0.0.0.0:*               LISTEN      0          21994      926/veeamservice
tcp        0      0 192.168.2.17:9292       0.0.0.0:*               LISTEN      1001       218352     32843/io.hm-rpc.4
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       217758     32693/iobroker.js-c
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       217765     32693/iobroker.js-c
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN      998        21874      784/influxd
tcp6       0      0 :::22                   :::*                    LISTEN      0          21741      806/sshd: /usr/sbin
tcp6       0      0 :::111                  :::*                    LISTEN      0          18271      1/init
tcp6       0      0 :::3000                 :::*                    LISTEN      116        23803      1365/grafana
tcp6       0      0 :::20002                :::*                    LISTEN      1001       221869     33873/io.web.1
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       219424     32970/io.web.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       217080     32711/io.admin.0
tcp6       0      0 :::8086                 :::*                    LISTEN      998        23409      784/influxd
tcp6       0      0 :::8084                 :::*                    LISTEN      1001       222860     33857/io.ws.0
udp        0      0 127.0.0.53:53           0.0.0.0:*                           102        21416      740/systemd-resolve
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          18270      1/init
udp6       0      0 fe80::11:32ff:fe2a::546 :::*                                101        21422      738/systemd-network
udp6       0      0 :::111                  :::*                                0          18272      1/init

*** Log File - Last 25 Lines ***

2023-07-02 18:50:38.078  - info: hm-rpc.4 (32843) xmlrpc -> 16 devices
2023-07-02 18:50:38.703  - info: hm-rpc.4 (32843) xmlrpc <- newDevices 16
2023-07-02 18:50:38.895  - info: hm-rpc.4 (32843) new virtual-devices devices/channels after filter: 0
2023-07-02 18:50:38.908  - info: hm-rpc.4 (32843) xmlrpc <- setReadyConfig ["iobrokerserver:hm-rpc.4:8c270e7f52559ad3e48d108a01888a6a","INT0000003"]
2023-07-02 18:50:38.922  - info: hm-rpc.4 (32843) xmlrpc <- setReadyConfig ["iobrokerserver:hm-rpc.4:8c270e7f52559ad3e48d108a01888a6a","INT0000004"]
2023-07-02 18:50:42.743  - info: influxdb.0 (32738) Not connected to InfluxDB, try later
2023-07-02 18:50:42.743  - info: influxdb.0 (32738) Error storing buffered series for fronius.0.powerflow.P_Grid before GetHistory: Not connected to InfluxDB, try later
2023-07-02 18:50:42.747  - info: influxdb.0 (32738) Not connected to InfluxDB, try later
2023-07-02 18:50:42.748  - info: influxdb.0 (32738) Error storing buffered series for fronius.0.powerflow.P_PV before GetHistory: Not connected to InfluxDB, try later
2023-07-02 18:50:42.753  - info: influxdb.0 (32738) Not connected to InfluxDB, try later
2023-07-02 18:50:42.753  - info: influxdb.0 (32738) Error storing buffered series for fronius.0.powerflow.inverter1.SOC before GetHistory: Not connected to InfluxDB, try later
2023-07-02 18:50:42.753  - info: influxdb.0 (32738) Not connected to InfluxDB, try later
2023-07-02 18:50:42.754  - info: influxdb.0 (32738) Error storing buffered series for fronius.0.powerflow.P_Load before GetHistory: Not connected to InfluxDB, try later
2023-07-02 18:50:45.778  - info: admin.0 (32711) ==> Connected system.user.admin from undefined
2023-07-02 18:50:46.711  - info: admin.0 (32711) ==> Connected system.user.admin from undefined
2023-07-02 18:50:46.712  - info: admin.0 (32711) ==> Connected system.user.admin from ::ffff:192.168.2.81
2023-07-02 18:50:46.824  - info: admin.0 (32711) <== Disconnect system.user.admin from undefined admin
2023-07-02 18:50:46.825  - info: admin.0 (32711) <== Disconnect system.user.admin from undefined admin
2023-07-02 18:50:46.827  - info: admin.0 (32711) <== Disconnect system.user.admin from ::ffff:192.168.2.81 admin
2023-07-02 18:51:36.453  - info: admin.0 (32711) ==> Connected system.user.admin from ::ffff:192.168.2.81
2023-07-02 18:51:40.290  - info: daswetter.0 (35771) starting. Version 3.1.8 in /opt/iobroker/node_modules/iobroker.daswetter, node: v18.16.1, js-controller: 4.0.24
2023-07-02 18:51:55.812  - info: daswetter.0 (35771) still wrong data structure from server received! repaired...
2023-07-02 18:51:59.581  - info: daswetter.0 (35771) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment
2023-07-02 18:52:00.160  - info: daswetter.0 (35771) cleaned everything up...
2023-07-02 18:52:00.229  - info: host.iobrokerserver instance system.adapter.daswetter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)

@thomas-braun Nein, Ubuntu läuft als VM auf einer Synology DS220+

Wenn ich iobroker neu starte gibt's auch keinerlei Einträge zu echarts im Log, wird also auch nicht mal versucht zu starten so wie's für mich aussieht.

@thomas-braun Hat keine Fehler gemeldet.

======================= SUMMARY =======================
                     v.2023-04-16


Operatingsystem:        Ubuntu 22.04.2 LTS
Kernel:                 5.15.0-76-generic
Installation:           microsoft
Timezone:               Europe/Berlin (CEST, +0200)
User-ID:                1000
X-Server:               false
Boot Target:            graphical.target

Pending OS-Updates:     0
Pending iob updates:    0

Nodejs-Installation:    /usr/bin/nodejs         v18.16.1
                        /usr/bin/node           v18.16.1
                        /usr/bin/npm            9.5.1
                        /usr/bin/npx            9.5.1

Recommended versions are nodejs 18.x.y and npm 9.x.y
Your nodejs installation is correct

MEMORY:
               total        used        free      shared  buff/cache   available
Mem:            3.9G        3.0G        157M        0.0K        770M        712M
Swap:           3.0G        1.6G        1.3G
Total:          6.9G        4.6G        1.5G

Active iob-Instances:   26
Active repo(s): stable

ioBroker Core:          js-controller           4.0.24
                        admin                   6.3.5

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : iobrokerserver                           -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.fronius-solarweb.0       : fronius-solarweb      : iobrokerserver                           -  enabled
+ system.adapter.web.0                    : web                   : iobrokerserver                           -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.web.1                    : web                   : iobrokerserver                           -  enabled, port: 20002, bind: 0.0.0.0, run as: admin

Objects:                18249
States:                 16546

Size of iob-Database:

23M     /opt/iobroker/iobroker-data/objects.jsonl
13M     /opt/iobroker/iobroker-data/states.jsonl



=================== END OF SUMMARY ====================

@thomas-braun Habe ich durchgeführt, der Adapter echarts wird dabei nicht neu hochgeladen (falls die gefühlten 1000 Codezeilen wichtig sind kann ich sie gerne noch posten).

Gut, dann gehen wir es mal von vorne an. Wie auch das versuchte Update brechen Installationsversuche von echarts 1.5.1 beim letzten Punkt ab;

$ iobroker add echarts auto --host iobrokerserver --debug

NPM version: 9.5.1

Installing iobroker.echarts@1.5.1... (System call)

added 38 packages in 14s120 packages are looking for funding run `npm fund` for details

host.iobrokerserver install adapter echarts

upload [28] echarts.admin /opt/iobroker/node_modules/iobroker.echarts/admin/asset-manifest.json asset-manifest.json application/json

upload [20] echarts.admin /opt/iobroker/node_modules/iobroker.echarts/admin/chart/static/js/main.eb0afecd.js.LICENSE.txt chart/static/js/main.eb0afecd.js.LICENSE.txt text/plain

upload [19] echarts.admin /opt/iobroker/node_modules/iobroker.echarts/admin/chart/static/js/main.eb0afecd.js.map chart/static/js/main.eb0afecd.js.map application/json

upload [18] echarts.admin /opt/iobroker/node_modules/iobroker.echarts/admin/echarts.png echarts.png image/png

upload [17] echarts.admin /opt/iobroker/node_modules/iobroker.echarts/admin/favicon.ico favicon.ico image/vnd.microsoft.icon

upload [16] echarts.admin /opt/iobroker/node_modules/iobroker.echarts/admin/manifest.json manifest.json application/json

upload [15] echarts.admin /opt/iobroker/node_modules/iobroker.echarts/admin/preview/asset-manifest.json preview/asset-manifest.json application/json

upload [14] echarts.admin /opt/iobroker/node_modules/iobroker.echarts/admin/preview/favicon.ico preview/favicon.ico image/vnd.microsoft.icon

upload [13] echarts.admin /opt/iobroker/node_modules/iobroker.echarts/admin/preview/index.html preview/index.html text/html

upload [12] echarts.admin /opt/iobroker/node_modules/iobroker.echarts/admin/preview/manifest.json preview/manifest.json application/json

upload [11] echarts.admin /opt/iobroker/node_modules/iobroker.echarts/admin/preview/static/css/main.f7b2c82f.css preview/static/css/main.f7b2c82f.css text/css

upload [10] echarts.admin /opt/iobroker/node_modules/iobroker.echarts/admin/preview/static/css/main.f7b2c82f.css.map preview/static/css/main.f7b2c82f.css.map application/json

upload [9] echarts.admin /opt/iobroker/node_modules/iobroker.echarts/admin/preview/static/js/main.1b04901d.js preview/static/js/main.1b04901d.js application/javascript

upload [8] echarts.admin /opt/iobroker/node_modules/iobroker.echarts/admin/preview/static/js/main.1b04901d.js.LICENSE.txt preview/static/js/main.1b04901d.js.LICENSE.txt text/plain

upload [7] echarts.admin /opt/iobroker/node_modules/iobroker.echarts/admin/preview/static/js/main.1b04901d.js.map preview/static/js/main.1b04901d.js.map application/json

upload [3] echarts.admin /opt/iobroker/node_modules/iobroker.echarts/admin/static/js/main.7952f0f7.js.LICENSE.txt static/js/main.7952f0f7.js.LICENSE.txt text/plain

upload [2] echarts.admin /opt/iobroker/node_modules/iobroker.echarts/admin/static/js/main.7952f0f7.js.map static/js/main.7952f0f7.js.map application/json

der Installationsprozess bleibt dann ohne weitere Meldungen im Protokoll hängen. Danach meldet iob update echarts als installiert:

marco@iobrokerserver:~$ iob update
Used repository: stable
Adapter    "accuweather"  : 1.2.4    , installed 1.2.4
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "backitup"     : 2.6.23   , installed 2.6.23
Adapter    "botvac"       : 1.0.0    , installed 1.0.0
Adapter    "daswetter"    : 3.1.8    , installed 3.1.8
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "echarts"      : 1.5.1    , installed 1.5.1
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "fritzdect"    : 2.3.1    , installed 2.3.1
Adapter    "fronius"      : 1.1.3    , installed 1.1.3
Adapter    "fronius-solarweb": 0.0.3 , installed 0.0.3
Adapter    "history"      : 2.2.4    , installed 2.2.4
Adapter    "hm-rega"      : 3.0.46   , installed 3.0.46
Adapter    "hm-rpc"       : 1.15.18  , installed 1.15.18
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "icons-icons8" : 0.0.1    , installed 0.0.1
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "javascript"   : 7.0.3    , installed 7.0.3
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "linux-control": 1.1.3    , installed 1.1.3
Adapter    "meross"       : 1.15.1   , installed 1.15.1
Adapter    "net-tools"    : 0.2.0    , installed 0.2.0
Adapter    "openweathermap": 0.3.9   , installed 0.3.9
Adapter    "ping"         : 1.5.3    , installed 1.5.3
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "statistics"   : 2.3.0    , installed 2.3.0
Adapter    "tankerkoenig" : 3.3.7    , installed 3.3.7
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "trashschedule": 2.2.0    , installed 2.2.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-bars"     : 0.1.4    , installed 0.1.4
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "vis-icontwo"  : 0.94.0   , installed 0.94.0
Adapter    "vis-inventwo" : 3.3.1    , installed 3.3.1
Adapter    "vis-justgage" : 1.0.2    , installed 1.0.2
Adapter    "vis-material-advanced": 1.7.2, installed 1.7.2
Adapter    "vis-plumb"    : 1.0.2    , installed 1.0.2
Adapter    "vis-rgraph"   : 0.0.2    , installed 0.0.2
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vis-weather"  : 2.5.6    , installed 2.5.6
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0

Er ist aber nicht in der Admin-Oberfläche verfügbar.