Problem mit HVAC-Mode:
Ich habe die folgende Fehlermeldung im Log:
openknx.0
2023-03-01 22:44:47.874 warn [warn] "2023-03-01T21:44:47.874Z" 'DPT1.fromBuffer: buf should be 1 byte (got 2 bytes)' 2
openknx.0
2023-03-01 22:44:47.695 warn [warn] "2023-03-01T21:44:47.695Z" 'DPT1.fromBuffer: buf should be 1 byte (got 2 bytes)' 2
openknx.0
2023-03-01 22:44:47.645 warn [warn] "2023-03-01T21:44:47.645Z" 'DPT1.fromBuffer: buf should be 1 byte (got 2 bytes)' 2
openknx.0
2023-03-01 22:44:47.592 warn [warn] "2023-03-01T21:44:47.592Z" 'DPT1.fromBuffer: buf should be 1 byte (got 2 bytes)' 2
openknx.0
2023-03-01 22:44:47.269 warn [warn] "2023-03-01T21:44:47.269Z" 'DPT1.fromBuffer: buf should be 1 byte (got 2 bytes)' 2
openknx.0
2023-03-01 22:44:46.822 warn [warn] "2023-03-01T21:44:46.822Z" 'DPT1.fromBuffer: buf should be 1 byte (got 2 bytes)' 2
Der Datenpunt sieht folgendermaßen aus:
{
"_id": "openknx.0.Heizung_und_Temp_(HZ).Gar__Wkst_.HZ_-_GH_-_El_Radiator_Beide_-_Betriebsartvorwahl_(Komfort_Nacht_Frost)",
"type": "state",
"common": {
"desc": "Basetype: 1-byte",
"name": "HZ - GH - El.Radiator Beide - Betriebsartvorwahl (Komfort/Nacht/Frost)",
"read": true,
"role": "state",
"type": "number",
"write": true
},
"native": {
"address": "6/4/35",
"answer_groupValueResponse": false,
"autoread": true,
"bitlength": 8,
"dpt": "DPT20.102",
"valuetype": "basic"
},
"from": "system.adapter.openknx.0",
"user": "system.user.admin",
"ts": 1677706626491,
"acl": {
"object": 1636,
"state": 1636,
"owner": "system.user.admin",
"ownerGroup": "system.group.administrator"
}
}
Hier die Projektierung in der ETS:
Frage:
Wo ist das Problem ?
Was ist falsch?