@kptkip danke schon mal. Das klappt super.
Wie kann ich das ganze nun umsetzen, dass sich nicht bei jedem Knopfdruck ein neuer Tab im Browser öffnet?
@kptkip danke schon mal. Das klappt super.
Wie kann ich das ganze nun umsetzen, dass sich nicht bei jedem Knopfdruck ein neuer Tab im Browser öffnet?
Hallo,
ich habe es final endlich hinbekommen und der Adapter läuft jetzt. Ich weiß nicht was anders ist als vorher. Es hat nun ohne andere Änderungen funktioniert den Adapter zu verbinden, jedoch nur mit direkter IP Eingabe der Player.
@withstu Da das leider alles nicht geholfen hat. Frage ich mich auf welche Weise kommen sich denn das Skript und der Adapter in die Quere? Könnte da das Problem liegen, dass ich beides mal ausgeführt habe?
@withstu Beide player 192.168.178.28:1255 und 192.168.178.23:1255 werden regelmäßig vom Netz genommen und nur bei bedarf gestartet.
Was (soweit mein Verständnis reicht) merkwürdig ist, ist dass er die Player neustarten kann. Dann muss er den Player doch auch finden.
@withstu Hallo nochmal. Ich habe den Adapter jetzt eine weitere Nacht laufen lassen und etwas mehr output bekommen:
heos.0
14832 2023-06-01 06:58:30.112 info searching for HEOS devices ...
heos.0
14832 2023-06-01 06:58:25.111 debug disconnected from HEOS
heos.0
14832 2023-06-01 06:58:25.109 debug data sent: heos://system/register_for_change_events?enable=off
heos.0
14832 2023-06-01 06:58:25.109 debug [HEARTBEAT] reset retries
heos.0
14832 2023-06-01 06:58:25.109 debug [HEARTBEAT] stop interval
heos.0
14832 2023-06-01 06:58:25.109 debug disconnecting from HEOS ...
heos.0
14832 2023-06-01 06:58:25.109 debug reconnecting to HEOS ...
heos.0
14832 2023-06-01 06:58:25.108 debug leader failure statistics: {"192.168.178.28":94,"192.168.178.23":94}
heos.0
14832 2023-06-01 06:58:25.108 debug [connect] Error: connect EHOSTUNREACH 192.168.178.28:1255
heos.0
14832 2023-06-01 06:58:22.050 info searching for HEOS devices ...
heos.0
14832 2023-06-01 06:58:22.050 debug connecting to HEOS (192.168.178.28) ...
heos.0
14832 2023-06-01 06:58:22.050 debug try to connect to 192.168.178.28 to reboot device
heos.0
14832 2023-06-01 06:58:22.049 debug following ips need to be rebooted: 192.168.178.28
heos.0
14832 2023-06-01 06:58:17.048 debug disconnected from HEOS
heos.0
14832 2023-06-01 06:58:17.046 debug data sent: heos://system/register_for_change_events?enable=off
heos.0
14832 2023-06-01 06:58:17.045 debug [HEARTBEAT] reset retries
heos.0
14832 2023-06-01 06:58:17.045 debug [HEARTBEAT] stop interval
heos.0
14832 2023-06-01 06:58:17.045 debug disconnecting from HEOS ...
heos.0
14832 2023-06-01 06:58:17.045 debug reconnecting to HEOS ...
heos.0
14832 2023-06-01 06:58:17.045 debug leader failure statistics: {"192.168.178.28":93,"192.168.178.23":94}
heos.0
14832 2023-06-01 06:58:17.044 debug [connect] Error: connect EHOSTUNREACH 192.168.178.23:1255
heos.0
14832 2023-06-01 06:58:13.971 info searching for HEOS devices ...
heos.0
14832 2023-06-01 06:58:13.970 debug connecting to HEOS (192.168.178.23) ...
heos.0
14832 2023-06-01 06:58:13.970 debug try to connect to 192.168.178.23 to reboot device
heos.0
14832 2023-06-01 06:58:13.970 debug following ips need to be rebooted: 192.168.178.23,192.168.178.28
heos.0
14832 2023-06-01 06:58:08.968 debug disconnected from HEOS
heos.0
14832 2023-06-01 06:58:08.966 debug [HEARTBEAT] reset retries
heos.0
14832 2023-06-01 06:58:08.966 debug [HEARTBEAT] stop interval
heos.0
14832 2023-06-01 06:58:08.966 debug disconnecting from HEOS ...
heos.0
14832 2023-06-01 06:58:08.965 debug reconnecting to HEOS ...
heos.0
14832 2023-06-01 06:58:07.964 debug add reboot ip 192.168.178.28
heos.0
14832 2023-06-01 06:58:07.964 debug add reboot ip 192.168.178.23
heos.0
14832 2023-06-01 06:58:07.964 debug rebooting all players
heos.0
14832 2023-06-01 06:58:07.963 debug can't find any HEOS devices. Try to connect known device IPs and reboot them to exclude device failure...
heos.0
14832 2023-06-01 06:57:37.961 debug searching for HEOS devices ...
@withstu Da kommt leider nichts nützliches bei raus... Das folgende spukt er beim Log-Level "silly" aus: und danach geht es immer mit "searching ..." weiter. Kein anderer output.
heos.0
14832 2023-05-31 16:51:14.263 debug searching for HEOS devices ...
heos.0
14832 2023-05-31 16:50:44.248 info searching for HEOS devices ...
heos.0
14832 2023-05-31 16:50:44.044 info starting. Version 1.10.0 in /opt/iobroker/node_modules/iobroker.heos, node: v18.16.0, js-controller: 4.0.24
host.raspberrypi
2023-05-31 16:50:40.075 info instance system.adapter.heos.0 started with pid 14832
@djmarc75 said in [Vorlage] Denon HEOS Script:
iob diag
Skript v.2023-04-16
*** BASE SYSTEM ***
Model : Raspberry Pi 4 Model B Rev 1.5
Architecture : aarch64
Docker : false
Virtualization : none
Distributor ID: Raspbian
Description: Raspbian GNU/Linux 11 (bullseye)
Release: 11
Codename: bullseye
PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)"
NAME="Raspbian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"
Systemuptime and Load:
20:16:29 up 58 min, 3 users, load average: 6.77, 2.36, 1.62
CPU threads: 4
Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=40.4'C
volt=0.8900V
*** Time and Time Zones ***
Local time: Sun 2023-05-21 20:16:29 CEST
Universal time: Sun 2023-05-21 18:16:29 UTC
RTC time: n/a
Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
NTP service: active
RTC in local TZ: no
*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin docker gpio i2c spi iobroker
*** X-Server-Setup ***
X-Server: true
Desktop:
Terminal: tty
Boot Target: graphical.target
*** MEMORY ***
total used free shared buff/cache available
Mem: 3.8G 1.2G 707M 40M 1.9G 2.5G
Swap: 99M 0B 99M
Total: 3.9G 1.2G 807M
3794 M total memory
1200 M used memory
1853 M active memory
646 M inactive memory
707 M free memory
245 M buffer memory
1640 M swap cache
99 M total swap
0 M used swap
99 M free swap
Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms
*** FILESYSTEM ***
Filesystem Type Size Used Avail Use% Mounted on
/dev/root ext4 29G 22G 6.7G 76% /
devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev
tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm
tmpfs tmpfs 759M 2.7M 757M 1% /run
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
/dev/loop0 squashfs 47M 47M 0 100% /snap/core18/2748
/dev/loop1 squashfs 47M 47M 0 100% /snap/core18/2723
/dev/loop2 squashfs 225M 225M 0 100% /snap/nextcloud/21522
/dev/loop3 squashfs 44M 44M 0 100% /snap/snapd/18936
/dev/loop4 squashfs 44M 44M 0 100% /snap/snapd/19124
/dev/mmcblk0p1 vfat 253M 51M 202M 20% /boot
tmpfs tmpfs 380M 36K 380M 1% /run/user/1000
/dev/mmcblk0p3 ext4 88G 24K 84G 1% /media/pi/b6462cb4-edb3-a74c-b924-794fd764376a
Messages concerning ext4 filesystem in dmesg:
Show mounted filesystems (real ones only):
TARGET SOURCE FSTYPE OPTIONS
/ /dev/mmcblk0p2 ext4 rw,noatime
|-/snap/core18/2748 /dev/loop0 squashfs ro,nodev,relatime,errors=continue
|-/snap/core18/2723 /dev/loop1 squashfs ro,nodev,relatime,errors=continue
|-/snap/nextcloud/21522 /dev/loop2 squashfs ro,nodev,relatime,errors=continue
|-/snap/snapd/18936 /dev/loop3 squashfs ro,nodev,relatime,errors=continue
|-/snap/snapd/19124 /dev/loop4 squashfs ro,nodev,relatime,errors=continue
|-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro
`-/media/pi/b6462cb4-edb3-a74c-b924-794fd764376a /dev/mmcblk0p3 ext4 rw,nosuid,nodev,relatime,errors=remount-ro
Files in neuralgic directories:
/var:
11G /var/
6.9G /var/lib
4.8G /var/lib/docker
4.7G /var/lib/docker/overlay2
3.8G /var/log
Archived and active journals take up 1.7G in the file system.
/opt/iobroker/backups:
737M /opt/iobroker/backups/
/opt/iobroker/iobroker-data:
275M /opt/iobroker/iobroker-data/
128M /opt/iobroker/iobroker-data/files
119M /opt/iobroker/iobroker-data/backup-objects
51M /opt/iobroker/iobroker-data/files/javascript.admin
38M /opt/iobroker/iobroker-data/files/scenes.admin/static/js
The five largest files in iobroker-data are:
9.1M /opt/iobroker/iobroker-data/objects.jsonl
8.9M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.7de3299d.chunk.js.map
7.5M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.2afdfa2c.chunk.js.map
7.1M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.21829349.chunk.js.map
7.0M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.5d4fbf6a.chunk.js.map
*** NodeJS-Installation ***
/usr/bin/nodejs v18.16.0
/usr/bin/node v18.16.0
/usr/bin/npm 9.5.1
/usr/bin/npx 9.5.1
nodejs:
Installed: 18.16.0-deb-1nodesource1
Candidate: 18.16.0-deb-1nodesource1
Version table:
*** 18.16.0-deb-1nodesource1 500
500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages
100 /var/lib/dpkg/status
12.22.12~dfsg-1~deb11u4 500
500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages
Temp directories causing npm8 problem: 0
No problems detected
*** ioBroker-Installation ***
ioBroker Status
iobroker is running on this host.
Objects type: jsonl
States type: jsonl
MULTIHOSTSERVICE/enabled: false
Core adapters versions
js-controller: 4.0.24
admin: 6.3.5
javascript: 6.1.4
Adapters from github: 0
Adapter State
+ system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.backitup.0 : backitup : raspberrypi - enabled
system.adapter.broadlink2.0 : broadlink2 : raspberrypi - disabled
+ system.adapter.discovery.0 : discovery : raspberrypi - enabled
system.adapter.heos.0 : heos : raspberrypi - disabled
+ system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086
+ system.adapter.info.0 : info : raspberrypi - enabled
+ system.adapter.javascript.1 : javascript : raspberrypi - enabled
+ system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1886, bind: 192.168.178.101
+ system.adapter.rpi2.0 : rpi2 : raspberrypi - enabled
+ system.adapter.scenes.0 : scenes : raspberrypi - enabled
+ system.adapter.signal-cmb.0 : signal-cmb : raspberrypi - enabled
+ system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 192.168.178.101 (SSL), run as: admin
+ system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1885, bind: 0.0.0.0
system.adapter.spotify-premium.0 : spotify-premium : raspberrypi - disabled
system.adapter.upnp.0 : upnp : raspberrypi - disabled
+ system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/ttyUSB0
+ instance is alive
Enabled adapters with bindings
+ system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086
+ system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1886, bind: 192.168.178.101
+ system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 192.168.178.101 (SSL), run as: admin
+ system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1885, bind: 0.0.0.0
+ system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/ttyUSB0
ioBroker-Repositories
stable : http://download.iobroker.net/sources-dist.json
beta : http://download.iobroker.net/sources-dist-latest.json
Active repo(s): stable
Installed ioBroker-Instances
Used repository: stable
Adapter "admin" : 6.3.5 , installed 6.3.5
Adapter "backitup" : 2.6.19 , installed 2.6.19
Adapter "broadlink2" : 2.1.5 , installed 2.1.5
Adapter "discovery" : 3.1.0 , installed 3.1.0
Adapter "heos" : 1.10.0 , installed 1.10.0
Adapter "influxdb" : 3.2.0 , installed 3.2.0
Adapter "info" : 1.9.26 , installed 1.9.26
Adapter "javascript" : 6.1.4 , installed 6.1.4
Controller "js-controller": 4.0.24 , installed 4.0.24
Adapter "mqtt" : 4.0.7 , installed 4.0.7
Adapter "rpi2" : 1.3.2 , installed 1.3.2
Adapter "scenes" : 2.3.9 , installed 2.3.9
Adapter "signal-cmb" : 0.3.0 , installed 0.3.0
Adapter "simple-api" : 2.7.2 , installed 2.7.2
Adapter "socketio" : 4.2.0 , installed 4.2.0
Adapter "sonoff" : 2.5.1 , installed 2.5.1
Adapter "spotify-premium": 1.2.1 , installed 1.2.1
Adapter "upnp" : 1.0.21 , installed 1.0.21
Adapter "web" : 4.3.0 , installed 4.3.0
Adapter "ws" : 1.3.0 , installed 1.3.0
Adapter "zigbee" : 1.8.10 , installed 1.8.10
Objects and States
Please stand by - This may take a while
Objects: 5151
States: 3385
*** OS-Repositories and Updates ***
Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:3 https://deb.nodesource.com/node_18.x bullseye InRelease
Hit:4 https://download.docker.com/linux/raspbian bullseye InRelease
Reading package lists...
Pending Updates: 0
*** Listening Ports ***
Active Internet connections (only servers)
xxx
*** Log File - Last 25 Lines ***
2023-05-21 20:09:38.649 - info: host.raspberrypi object deleted system.adapter.heos.1
2023-05-21 20:09:38.653 - info: host.raspberrypi iobroker host.raspberrypi Deleting 22 state(s).
2023-05-21 20:09:39.753 - info: host.raspberrypi iobroker exit 0
2023-05-21 20:09:41.703 - info: admin.0 (22943) ==> Connected system.user.admin from ::ffff:192.168.178.84
2023-05-21 20:10:16.793 - info: admin.0 (22943) <== Disconnect system.user.admin from ::ffff:192.168.178.84
2023-05-21 20:10:33.806 - error: rpi2.0 (345) GPIO is not initialized!
2023-05-21 20:11:33.780 - error: rpi2.0 (345) GPIO is not initialized!
2023-05-21 20:12:33.774 - error: rpi2.0 (345) GPIO is not initialized!
2023-05-21 20:13:21.759 - info: admin.0 (22943) ==> Connected system.user.admin from ::ffff:192.168.178.84
2023-05-21 20:13:29.605 - info: admin.0 (22943) <== Disconnect system.user.admin from ::ffff:192.168.178.84
2023-05-21 20:13:33.772 - error: rpi2.0 (345) GPIO is not initialized!
2023-05-21 20:14:15.071 - info: heos.0 (3089) searching for HEOS devices ...
2023-05-21 20:14:23.164 - info: heos.0 (3089) searching for HEOS devices ...
2023-05-21 20:14:31.254 - info: heos.0 (3089) searching for HEOS devices ...
2023-05-21 20:14:31.272 - warn: heos.0 (3089) rebooting player 192.168.178.23
2023-05-21 20:14:37.186 - info: heos.0 (3089) searching for HEOS devices ...
2023-05-21 20:14:46.836 - info: host.raspberrypi "system.adapter.heos.0" disabled
2023-05-21 20:14:46.839 - info: host.raspberrypi stopInstance system.adapter.heos.0 (force=false, process=true)
2023-05-21 20:14:46.851 - info: heos.0 (3089) Got terminate signal TERMINATE_YOURSELF
2023-05-21 20:14:46.852 - info: heos.0 (3089) disconnecting from HEOS ...
2023-05-21 20:14:46.855 - info: heos.0 (3089) disconnected from HEOS
2023-05-21 20:14:46.857 - info: heos.0 (3089) terminating
2023-05-21 20:14:46.859 - info: heos.0 (3089) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-05-21 20:14:46.933 - info: host.raspberrypi stopInstance system.adapter.heos.0 send kill signal
2023-05-21 20:14:47.456 - info: host.raspberrypi instance system.adapter.heos.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
@withstu ich habe nun alle geupdated. Raspbian von Buster auf Bullseye. Node auf 18 und npm auf 9. Dann ging der Adapter für ca. 10 min. Dann habe ich das Skript gestartet und kurz darauf läuft es nicht mehr. Skript wieder aus HEOS adapter neu starten hilft nicht. Beides verbindet wieder nicht mehr...
@withstu Das komische ist, dass es bis vor ca 2 Monaten problemlos funktioniert hat und von einem auf den anderen Tag nicht mehr. Das Update muss ich dann wohl mal angehen...
@djmarc75
ok, also das hat schonmal funktioniert. Jetzt läuft es mit dem Befehl
Da ich etwas paranoid bin (evtl auch gerade weil ich mich nicht so gut auskenne) habe ich den Teil der IP adressen entfernt, wenn der auch nötig ist würde ich ihn lieber nicht ganz so öffentlich teilen.
Ich hoffe hiermit lässt sich arbeiten.
Skript v.2023-04-16
*** BASE SYSTEM ***
Model : Raspberry Pi 4 Model B Rev 1.5
Architecture : aarch64
Docker : false
Virtualization : none
Distributor ID: Raspbian
Description: Raspbian GNU/Linux 11 (bullseye)
Release: 11
Codename: bullseye
PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)"
NAME="Raspbian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"
Systemuptime and Load:
15:26:29 up 20:50, 3 users, load average: 2.51, 1.95, 1.15
CPU threads: 4
Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=43.3'C
volt=0.8900V
*** Time and Time Zones ***
Local time: Wed 2023-05-17 15:26:29 CEST
Universal time: Wed 2023-05-17 13:26:29 UTC
RTC time: n/a
Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
NTP service: active
RTC in local TZ: no
*** User and Groups ***
xxxxx
/home/xxxxx
xxxxx adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin docker gpio i2c spi iobroker
*** X-Server-Setup ***
X-Server: true
Desktop:
Terminal: tty
Boot Target: graphical.target
*** MEMORY ***
total used free shared buff/cache available
Mem: 3.8G 1.3G 246M 40M 2.2G 2.5G
Swap: 99M 0B 99M
Total: 3.9G 1.3G 346M
3794 M total memory
1349 M used memory
1887 M active memory
796 M inactive memory
246 M free memory
303 M buffer memory
1895 M swap cache
99 M total swap
0 M used swap
99 M free swap
Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms
*** FILESYSTEM ***
Filesystem Type Size Used Avail Use% Mounted on
/dev/root ext4 29G 19G 9.3G 67% /
devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev
tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm
tmpfs tmpfs 759M 2.7M 757M 1% /run
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
/dev/loop0 squashfs 47M 47M 0 100% /snap/core18/2723
/dev/loop2 squashfs 225M 225M 0 100% /snap/nextcloud/21522
/dev/loop1 squashfs 47M 47M 0 100% /snap/core18/2748
/dev/loop3 squashfs 44M 44M 0 100% /snap/snapd/18936
/dev/loop4 squashfs 44M 44M 0 100% /snap/snapd/19124
/dev/mmcblk0p1 vfat 253M 51M 202M 20% /boot
tmpfs tmpfs 380M 36K 380M 1% /run/user/1000
Messages concerning ext4 filesystem in dmesg:
Show mounted filesystems (real ones only):
TARGET SOURCE FSTYPE OPTIONS
/ /dev/mmcblk0p2 ext4 rw,noatime
|-/snap/core18/2723 /dev/loop0 squashfs ro,nodev,relatime,errors=continue
|-/snap/nextcloud/21522 /dev/loop2 squashfs ro,nodev,relatime,errors=continue
|-/snap/core18/2748 /dev/loop1 squashfs ro,nodev,relatime,errors=continue
|-/snap/snapd/18936 /dev/loop3 squashfs ro,nodev,relatime,errors=continue
|-/snap/snapd/19124 /dev/loop4 squashfs ro,nodev,relatime,errors=continue
`-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro
Files in neuralgic directories:
/var:
8.4G /var/
6.9G /var/lib
4.7G /var/lib/docker/overlay2
4.7G /var/lib/docker
1.9G /var/lib/snapd
Archived and active journals take up 136.0M in the file system.
/opt/iobroker/backups:
710M /opt/iobroker/backups/
/opt/iobroker/iobroker-data:
273M /opt/iobroker/iobroker-data/
128M /opt/iobroker/iobroker-data/files
118M /opt/iobroker/iobroker-data/backup-objects
51M /opt/iobroker/iobroker-data/files/javascript.admin
38M /opt/iobroker/iobroker-data/files/scenes.admin/static/js
The five largest files in iobroker-data are:
8.9M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.7de3299d.chunk.js.map
8.7M /opt/iobroker/iobroker-data/objects.jsonl
7.5M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.2afdfa2c.chunk.js.map
7.1M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.21829349.chunk.js.map
7.0M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.5d4fbf6a.chunk.js.map
*** NodeJS-Installation ***
/usr/bin/nodejs v14.21.3
/usr/bin/node v14.21.3
/usr/bin/npm 6.14.18
/usr/bin/npx 6.14.18
nodejs:
Installed: 14.21.3-deb-1nodesource1
Candidate: 14.21.3-deb-1nodesource1
Version table:
*** 14.21.3-deb-1nodesource1 500
500 https://deb.nodesource.com/node_14.x buster/main armhf Packages
100 /var/lib/dpkg/status
12.22.12~dfsg-1~deb11u4 500
500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages
Temp directories causing npm8 problem: 0
No problems detected
*** ioBroker-Installation ***
ioBroker Status
iobroker is running on this host.
Objects type: jsonl
States type: jsonl
MULTIHOSTSERVICE/enabled: false
Core adapters versions
js-controller: 4.0.23
admin: 6.3.5
javascript: 6.1.4
Adapters from github: 1
Adapter State
+ system.adapter.admin.0 : admin : raspberrypi - enabled, port: xxxx, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.backitup.0 : backitup : raspberrypi - enabled
system.adapter.broadlink2.0 : broadlink2 : raspberrypi - disabled
+ system.adapter.discovery.0 : discovery : raspberrypi - enabled
system.adapter.heos.0 : heos : raspberrypi - disabled
+ system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: xxxx
+ system.adapter.info.0 : info : raspberrypi - enabled
+ system.adapter.javascript.1 : javascript : raspberrypi - enabled
+ system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: xxxx, bind: 192.xxx.xxx.xxx
+ system.adapter.rpi2.0 : rpi2 : raspberrypi - enabled
+ system.adapter.scenes.0 : scenes : raspberrypi - enabled
+ system.adapter.signal-cmb.0 : signal-cmb : raspberrypi - enabled
+ system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: xxxx, bind: 192.xxx.xxx.xxx(SSL), run as: admin
+ system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: xxxx, bind: 0.0.0.0
system.adapter.spotify-premium.0 : spotify-premium : raspberrypi - disabled
system.adapter.upnp.0 : upnp : raspberrypi - disabled
+ system.adapter.web.0 : web : raspberrypi - enabled, port: xxxx, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_2ce58c1eff92eb11b66e214f3d98b6d1-if00-port0
+ instance is alive
Enabled adapters with bindings
+ system.adapter.admin.0 : admin : raspberrypi - enabled, port: xxxx, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: xxxx
+ system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: xxxx, bind: 192.xxx.xxx.xxx
+ system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: xxxx, bind: 192.xxx.xxx.xxx(SSL), run as: admin
+ system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: xxxx, bind: 0.0.0.0
+ system.adapter.web.0 : web : raspberrypi - enabled, port: xxxx, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_2ce58c1eff92eb11b66e214f3d98b6d1-if00-port0
ioBroker-Repositories
stable : http://download.iobroker.net/sources-dist.json
beta : http://download.iobroker.net/sources-dist-latest.json
Active repo(s): stable
Installed ioBroker-Instances
Used repository: stable
Adapter "admin" : 6.3.5 , installed 6.3.5
Adapter "backitup" : 2.6.19 , installed 2.6.19
Adapter "broadlink2" : 2.1.5 , installed 2.1.5
Adapter "discovery" : 3.1.0 , installed 3.1.0
Adapter "heos" : 1.10.0 , installed 1.10.0
Adapter "influxdb" : 3.2.0 , installed 3.2.0
Adapter "info" : 1.9.26 , installed 1.9.26
Adapter "javascript" : 6.1.4 , installed 6.1.4
Controller "js-controller": 4.0.24 , installed 4.0.23 [Updatable]
Adapter "mqtt" : 4.0.7 , installed 2.7.4 [Updatable]
Adapter "rpi2" : 1.3.2 , installed 1.3.2
Adapter "scenes" : 2.3.9 , installed 2.3.9
Adapter "signal-cmb" : 0.3.0 , installed 0.3.0
Adapter "simple-api" : 2.7.2 , installed 2.7.2
Adapter "socketio" : 4.2.0 , installed 4.2.0
Adapter "sonoff" : 2.5.1 , installed 2.5.1
Adapter "spotify-premium": 1.2.1 , installed 1.2.1
Adapter "upnp" : 1.0.21 , installed 1.0.21
Adapter "web" : 4.3.0 , installed 4.3.0
Adapter "ws" : 1.3.0 , installed 1.3.0
Adapter "zigbee" : 1.8.10 , installed 1.8.10
Objects and States
Please stand by - This may take a while
Objects: 5151
States: 3396
*** OS-Repositories and Updates ***
Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:2 https://deb.nodesource.com/node_14.x buster InRelease
Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:4 https://download.docker.com/linux/raspbian bullseye InRelease
Reading package lists...
Pending Updates: 3
*** Listening Ports ***
Active Internet connections (only servers)
xxx
*** Log File - Last 25 Lines ***
2023-05-17 15:25:55.948 - info: info.0 (8811) Reading/updating systemdata.
2023-05-17 15:25:57.044 - info: info.0 (8811) State value to set for "info.0.sysinfo.cpu.info.speed" has to be type "string" but received type "number"
2023-05-17 15:25:57.201 - info: info.0 (8811) State value to set for "info.0.sysinfo.cpu.info.cache-l3" has to be type "number" but received type "string"
2023-05-17 15:25:57.421 - info: info.0 (8811) cpu Temp res = {"main":45.764,"cores":[],"max":45.764,"socket":[],"chipset":null}
2023-05-17 15:25:59.584 - info: host.raspberrypi instance system.adapter.simple-api.0 started with pid 9066
2023-05-17 15:25:59.658 - info: web.0 (8850) starting. Version 4.3.0 in /opt/iobroker/node_modules/iobroker.web, node: v14.21.3, js-controller: 4.0.23
2023-05-17 15:26:00.277 - info: web.0 (8850) Secure socket.io server listening on port 8082
2023-05-17 15:26:00.309 - info: web.0 (8850) https server listening on port 8082
2023-05-17 15:26:01.923 - warn: zigbee.0 (8546) DeviceAvailability:Failed to ping 0x0017880109409518 LWA009
2023-05-17 15:26:02.100 - warn: zigbee.0 (8546) DeviceAvailability:Failed to ping 0x001788010c3c16d7 929003046301_03
2023-05-17 15:26:02.700 - warn: zigbee.0 (8546) DeviceAvailability:Failed to ping 0x0017880108d9874f LWA009
2023-05-17 15:26:02.934 - warn: zigbee.0 (8546) DeviceAvailability:Failed to ping 0x001788010c429b4b 929003046301_02
2023-05-17 15:26:03.586 - info: host.raspberrypi instance system.adapter.backitup.0 started with pid 9141
2023-05-17 15:26:03.915 - info: simple-api.0 (9066) starting. Version 2.7.2 in /opt/iobroker/node_modules/iobroker.simple-api, node: v14.21.3, js-controller: 4.0.23
2023-05-17 15:26:04.063 - info: simple-api.0 (9066) Secure simpleAPI server listening on port 8087
2023-05-17 15:26:04.064 - info: simple-api.0 (9066) Allow states only when user is owner: false
2023-05-17 15:26:04.093 - info: simple-api.0 (9066) https server listening on port 8087
2023-05-17 15:26:06.590 - warn: zigbee.0 (8546) DeviceAvailability:Failed to ping 0x0017880109898696 440400982841
2023-05-17 15:26:06.912 - warn: zigbee.0 (8546) DeviceAvailability:Failed to ping 0x7cb03eaa0a0061c9 LIGHTIFY Indoor Flex RGBW
2023-05-17 15:26:07.009 - warn: zigbee.0 (8546) DeviceAvailability:Failed to ping 0x7cb03eaa0a0091da LIGHTIFY Indoor Flex RGBW
2023-05-17 15:26:07.373 - info: backitup.0 (9141) starting. Version 2.6.19 in /opt/iobroker/node_modules/iobroker.backitup, node: v14.21.3, js-controller: 4.0.23
2023-05-17 15:26:07.407 - warn: zigbee.0 (8546) DeviceAvailability:Failed to ping 0x00178801098986f7 440400982841
2023-05-17 15:26:07.539 - info: host.raspberrypi instance system.adapter.signal-cmb.0 started with pid 9461
2023-05-17 15:26:07.596 - info: backitup.0 (9141) [iobroker] backup will be activated at 02:40 every 1 day(s)
2023-05-17 15:26:10.877 - info: signal-cmb.0 (9461) starting. Version 0.3.0 in /opt/iobroker/node_modules/iobroker.signal-cmb, node: v14.21.3, js-controller: 4.0.23