@thoml
Volltreffer - so einfach kann es sein...
Herzlichen Dank!
@thoml
Volltreffer - so einfach kann es sein...
Herzlichen Dank!
Hallo,
ich habe einen Gosund SP112 auf Tasmota geflascht und schon einige Zeit im Einsatz.
Ich verwende auch den USB-Anschluß. Dieser wird durch ein Blockly-Script ein- und ausgeschaltet.
Sehr selten kommt das Abschalt-Signal nicht an und der Anschluß bleibt aktv.
Dies möchte ich mit dem PulseTime-Befehl unterbinden.
Meine Idee ist, es die Dauer auf 120 Sekunden zu begrenzen.
Leider klappt das nur für die Steckdose.
In der Tasmota-Doku steht:
"PulseTime<x> Display the amount of PulseTime remaining on the corresponding Relay<x>(x = 1..32)
<value> Set the duration to keep Relay<x> ON when Power<x> ON command is issued. After this amount of time, the power will be turned OFF.
0 / OFF = disable use of PulseTime for Relay<x>
1..111 = set PulseTime for Relay<x> in 0.1 second increments
112..64900 = set PulseTime for Relay<x>, offset by 100, in 1 second increments. Add 100 to desired interval in seconds, e.g., PulseTime 113 = 13 seconds and PulseTime 460 = 6 minutes (i.e., 360 seconds)"
Ich habe schon
Pulsetime 2 1120
17:28:06.676 MQT: stat/tasmota-2/RESULT = {"PulseTime1":{"Set":2,"Remaining":2}}
17:28:07.023 MQT: stat/tasmota-2/RESULT = {"POWER1":"OFF"}
17:28:07.026 MQT: stat/tasmota-2/POWER1 = OFF
probiert, aber das hat immer nur Effekt auf die Steckdose.
Hat jemand einen Tipp für mich??
Vielleicht ist die Meldung "No converter available for 'V3-BTZB/V3-BTZBE' with key 'lock_state' " im Log ein Hinweis. Ich kann damit aber nichts anfangen.
@ro75
ich habe es auch noch mit einem Blockly-Sktipt probiert - geht auch nicht.
@ro75 ich habe in den Objekten den lock_state auf locked oder unlocked gesetzt.
In einem anderen Beitrag im Forum würde das erwähnt.
Hallo,
mein Danalock V3 zigbee ist gestern geliefert worden und konnte direkt beim ersten Versuch gepairt werden.
Ich verwende den Stick von Dresden Elektronik, keine Bridge.
Bisher kann ich den Status "lock_state" = "locked" oder "unlocked" auslesen. Eine Steuerung des Danalock funktioniert nur im Zigbee-Adapter, nicht über die Objekte.
Habe ich bei der Einrichtung etwas übersehen?
Ein Teil vom Log:
2023-05-11 16:35:54.507 debug zigbee-herdsman:deconz:driver networkstate: 2 apsDataConfirm: 0 apsDataIndication: 0 configChanged: 0 apsRequestFreeSlots: 1
zigbee.0
2023-05-11 16:35:54.506 debug zigbee-herdsman:deconz:frameParser device state: 10100010
zigbee.0
2023-05-11 16:35:54.504 debug zigbee-herdsman:deconz:driver send read device state from queue. seqNr: 143
zigbee.0
2023-05-11 16:35:44.503 debug zigbee-herdsman:deconz:driver networkstate: 2 apsDataConfirm: 0 apsDataIndication: 0 configChanged: 0 apsRequestFreeSlots: 1
zigbee.0
2023-05-11 16:35:44.502 debug zigbee-herdsman:deconz:frameParser device state: 10100010
zigbee.0
2023-05-11 16:35:44.500 debug zigbee-herdsman:deconz:driver send read device state from queue. seqNr: 142
zigbee.0
2023-05-11 16:35:34.503 debug zigbee-herdsman:deconz:driver networkstate: 2 apsDataConfirm: 0 apsDataIndication: 0 configChanged: 0 apsRequestFreeSlots: 1
zigbee.0
2023-05-11 16:35:34.502 debug zigbee-herdsman:deconz:frameParser device state: 10100010
zigbee.0
2023-05-11 16:35:34.500 debug zigbee-herdsman:deconz:driver send read device state from queue. seqNr: 141
zigbee.0
2023-05-11 16:35:33.798 debug DeviceAvailability:Non-pingable device 0x00124b00291a0c0f MS01 was last seen '2613.126' seconds ago.
zigbee.0
2023-05-11 16:35:33.795 debug DeviceAvailability:Non-pingable device 0x588e81fffe43d051 V3-BTZBE was last seen '237.216' seconds ago.
zigbee.0
2023-05-11 16:35:33.794 debug DeviceAvailability:Non-pingable device 0x00124b002919fd1b MS01 was last seen '79681.711' seconds ago.
zigbee.0
2023-05-11 16:35:33.793 debug DeviceAvailability:Non-pingable device 0x00124b0029117bbc DS01 was last seen '37627.632' seconds ago.
zigbee.0
2023-05-11 16:35:33.792 debug DeviceAvailability:Non-pingable device 0x00124b00291172fa DS01 was last seen '12299.282' seconds ago.
zigbee.0
2023-05-11 16:35:33.790 debug DeviceAvailability:Non-pingable device 0x00124b0029117ff3 DS01 was last seen '1311.368' seconds ago.
zigbee.0
2023-05-11 16:35:33.772 debug DeviceAvailability:Non-pingable device 0x00124b002893482f DS01 was last seen '15663.609' seconds ago.
zigbee.0
2023-05-11 16:35:33.760 debug DeviceAvailability:Non-pingable device 0x00124b0028934b85 DS01 was last seen '2056.072' seconds ago.
zigbee.0
2023-05-11 16:35:33.752 debug DeviceAvailability:Non-pingable device 0x00124b0029112a12 DS01 was last seen '14358.56' seconds ago.
zigbee.0
2023-05-11 16:35:33.751 debug DeviceAvailability:Non-pingable device 0x00124b0029112b44 DS01 was last seen '10810.505' seconds ago.
zigbee.0
2023-05-11 16:35:33.736 debug DeviceAvailability:Non-pingable device 0x00124b002919e3b2 TH01 was last seen '1147.874' seconds ago.
zigbee.0
2023-05-11 16:35:33.732 debug DeviceAvailability:Non-pingable device 0x00124b002894616b DS01 was last seen '11487.52' seconds ago.
zigbee.0
2023-05-11 16:35:24.504 debug zigbee-herdsman:deconz:driver networkstate: 2 apsDataConfirm: 0 apsDataIndication: 0 configChanged: 0 apsRequestFreeSlots: 1
zigbee.0
2023-05-11 16:35:24.503 debug zigbee-herdsman:deconz:frameParser device state: 10100010
zigbee.0
2023-05-11 16:35:24.501 debug zigbee-herdsman:deconz:driver send read device state from queue. seqNr: 140
zigbee.0
2023-05-11 16:35:15.656 error No converter available for 'V3-BTZB/V3-BTZBE' with key 'lock_state'
zigbee.0
2023-05-11 16:35:15.656 debug Mapped Model: {"zigbeeModel":["V3-BTZB","V3-BTZBE"],"model":"V3-BTZB/V3-BTZBE","vendor":"Danalock","description":"BT/ZB smartlock","fromZigbee":[{"cluster":"closuresDoorLock","type":["attributeReport","readResponse"]},{"cluster":"closuresDoorLock","type":"commandOperationEventNotification"},{"cluster":"genPowerCfg","type":["attributeReport","readResponse"]},{"cluster":"closuresDoorLock","type":"commandProgrammingEventNotification"},{"cluster":"closuresDoorLock","type":["commandGetPinCodeRsp"],"options":[{"type":"binary","name":"expose_pin","property":"expose_pin","access":2,"value_on":true,"value_off":false,"description":"Expose pin of this lock in the published payload (default false)."}]}],"toZigbee":[{"key":["state"]},{"key":["pin_code"]},{"key":["user_status"]},{"key":["scene_store"]},{"key":["scene_recall"]},{"key":["scene_add"]},{"key":["scene_remove"]},{"key":["scene_remove_all"]},{"key":["read"]},{"key":["write"]},{"key":["command"]},{"key":["reset"]}],"meta":{"pinCodeCount":20},"exposes":[{"type":"lock","features":[{"type":"binary","name":"state","property":"state","access":7,"value_on":"LOCK","value_off":"UNLOCK","description":"State of the lock"},{"type":"enum","name":"lock_state","property":"lock_state","access":1,"values":["not_fully_locked","locked","unlocked"],"description":"Actual state of the lock"}]},{"type":"numeric","name":"battery","property":"battery","access":1,"unit":"%","description":"Remaining battery in %","value_min":0,"value_max":100},{"type":"composite","property":"pin_code","name":"pin_code","features":[{"type":"numeric","name":"user","property":"user","access":2,"description":"User ID to set or clear the pincode for"},{"type":"enum","name":"user_type","property":"user_type","access":2,"values":["unrestricted","year_day_schedule","week_day_schedule","master","non_access"],"description":"Type of user, unrestricted: owner (default), (year|week)_day_schedule: user has ability to open lock based on specific time period, master: user has ability to both program and operate the door lock, non_access: user is recognized by the lock but does not have the ability to open the lock"},{"type":"binary","name":"user_enabled","property":"user_enabled","access":2,"value_on":true,"value_off":false,"description":"Whether the user is enabled/disabled"},{"type":"numeric","name":"pin_code","property":"pin_code","access":2,"description":"Pincode to set, set pincode to null to clear"}]},{"type":"enum","name":"action","property":"action","access":1,"values":["unknown","lock","unlock","lock_failure_invalid_pin_or_id","lock_failure_invalid_schedule","unlock_failure_invalid_pin_or_id","unlock_failure_invalid_schedule","one_touch_lock","key_lock","key_unlock","auto_lock","schedule_lock","schedule_unlock","manual_lock","manual_unlock","non_access_user_operational_event"],"description":"Triggered action on the lock"},{"type":"enum","name":"action_source_name","property":"action_source_name","access":1,"values":["keypad","rfid","manual","rf"],"description":"Source of the triggered action on the lock"},{"type":"numeric","name":"action_user","property":"action_user","access":1,"description":"ID of user that triggered the action on the lock"},{"type":"numeric","name":"linkquality","property":"linkquality","access":1,"unit":"lqi","description":"Link quality (signal strength)","value_min":0,"value_max":255}],"options":[{"type":"binary","name":"expose_pin","property":"expose_pin","access":2,"value_on":true,"value_off":false,"description":"Expose pin of this lock in the published payload (default false)."}]}
zigbee.0
2023-05-11 16:35:15.655 debug entity: {"type":"device","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":12,"_type":"EndDevice","_ieeeAddr":"0x588e81fffe43d051","_networkAddress":19351,"_manufacturerID":4444,"_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":1,"profileID":260,"deviceID":10,"inputClusters":[0,1,3,9,32,257,2821,64767],"outputClusters":[25],"deviceNetworkAddress":19351,"deviceIeeeAddress":"0x588e81fffe43d051","clusters":{"genBasic":{"attributes":{"modelId":"V3-BTZBE","manufacturerName":"Danalock","powerSource":3,"zclVersion":3,"appVersion":3,"hwVersion":5,"dateCode":"20211123"}},"genPollCtrl":{"attributes":{"checkinInterval":14400}},"genPowerCfg":{"attributes":{"batteryPercentageRemaining":174}},"closuresDoorLock":{"attributes":{"lockState":2}}},"_binds":[{"cluster":32,"type":"endpoint","deviceIeeeAddress":"0x00212effff096027","endpointID":1},{"cluster":257,"type":"endpoint","deviceIeeeAddress":"0x00212effff096027","endpointID":1},{"cluster":1,"type":"endpoint","deviceIeeeAddress":"0x00212effff096027","endpointID":1}],"_configuredReportings":[{"cluster":257,"attrId":0,"minRepIntval":0,"maxRepIntval":3600,"repChange":0},{"cluster":1,"attrId":33,"minRepIntval":3600,"maxRepIntval":62000,"repChange":0}],"meta":{},"pendingRequests":[]}],"_manufacturerName":"Danalock","_powerSource":"Battery","_modelID":"V3-BTZBE","_applicationVersion":3,"_zclVersion":3,"_hardwareVersion":5,"_dateCode":"20211123","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"_skipTimeResponse":false,"meta":{"configured":923668394},"_lastSeen":1683815496579,"_defaultSendRequestWhen":"active","_linkquality":255,"_lastDefaultResponseSequenceNumber":33},"mapped":{"zigbeeModel":["V3-BTZB","V3-BTZBE"],"model":"V3-BTZB/V3-BTZBE","vendor":"Danalock","description":"BT/ZB smartlock","fromZigbee":[{"cluster":"closuresDoorLock","type":["attributeReport","readResponse"]},{"cluster":"closuresDoorLock","type":"commandOperationEventNotification"},{"cluster":"genPowerCfg","type":["attributeReport","readResponse"]},{"cluster":"closuresDoorLock","type":"commandProgrammingEventNotification"},{"cluster":"closuresDoorLock","type":["commandGetPinCodeRsp"],"options":[{"type":"binary","name":"expose_pin","property":"expose_pin","access":2,"value_on":true,"value_off":false,"description":"Expose pin of this lock in the published payload (default false)."}]}],"toZigbee":[{"key":["state"]},{"key":["pin_code"]},{"key":["user_status"]},{"key":["scene_store"]},{"key":["scene_recall"]},{"key":["scene_add"]},{"key":["scene_remove"]},{"key":["scene_remove_all"]},{"key":["read"]},{"key":["write"]},{"key":["command"]},{"key":["reset"]}],"meta":{"pinCodeCount":20},"exposes":[{"type":"lock","features":[{"type":"binary","name":"state","property":"state","access":7,"value_on":"LOCK","value_off":"UNLOCK","description":"State of the lock"},{"type":"enum","name":"lock_state","property":"lock_state","access":1,"values":["not_fully_locked","locked","unlocked"],"description":"Actual state of the lock"}]},{"type":"numeric","name":"battery","property":"battery","access":1,"unit":"%","description":"Remaining battery in %","value_min":0,"value_max":100},{"type":"composite","property":"pin_code","name":"pin_code","features":[{"type":"numeric","name":"user","property":"user","access":2,"description":"User ID to set or clear the pincode for"},{"type":"enum","name":"user_type","property":"user_type","access":2,"values":["unrestricted","year_day_schedule","week_day_schedule","master","non_access"],"description":"Type of user, unrestricted: owner (default), (year|week)_day_schedule: user has ability to open lock based on specific time period, master: user has ability to both program and operate the door lock, non_access: user is recognized by the lock but does not have the ability to open the lock"},{"type":"binary","name":"user_enabled","property":"user_enabled","access":2,"value_on":true,"value_off":false,"description":"Whether the user is enabled/disabled"},{"type":"numeric","name":"pin_code","property":"pin_code","access":2,"description":"Pincode to set, set pincode to null to clear"}]},{"type":"enum","name":"action","property":"action","access":1,"values":["unknown","lock","unlock","lock_failure_invalid_pin_or_id","lock_failure_invalid_schedule","unlock_failure_invalid_pin_or_id","unlock_failure_invalid_schedule","one_touch_lock","key_lock","key_unlock","auto_lock","schedule_lock","schedule_unlock","manual_lock","manual_unlock","non_access_user_operational_event"],"description":"Triggered action on the lock"},{"type":"enum","name":"action_source_name","property":"action_source_name","access":1,"values":["keypad","rfid","manual","rf"],"description":"Source of the triggered action on the lock"},{"type":"numeric","name":"action_user","property":"action_user","access":1,"description":"ID of user that triggered the action on the lock"},{"type":"numeric","name":"linkquality","property":"linkquality","access":1,"unit":"lqi","description":"Link quality (signal strength)","value_min":0,"value_max":255}],"options":["[Circular]"]},"endpoint":"[Circular]","endpoints":"[Circular]","name":"0x588e81fffe43d051"}
zigbee.0
2023-05-11 16:35:15.651 debug Change state 'lock_state' at device 0x588e81fffe43d051 type 'V3-BTZB/V3-BTZBE'
zigbee.0
2023-05-11 16:35:15.604 debug User stateChange zigbee.0.588e81fffe43d051.lock_state {"val":"locked","ack":false,"ts":1683815715601,"q":0,"from":"system.adapter.admin.0","user":"system.user.admin","lc":1683815715601}
admin.0
2023-05-11 16:35:15.600 warn Read-only state "zigbee.0.588e81fffe43d051.lock_state" has been written without ack-flag with value "locked"
zigbee.0
2023-05-11 16:35:14.504 debug zigbee-herdsman:deconz:driver networkstate: 2 apsDataConfirm: 0 apsDataIndication: 0 configChanged: 0 apsRequestFreeSlots: 1
zigbee.0
2023-05-11 16:35:14.503 debug zigbee-herdsman:deconz:frameParser device state: 10100010
zigbee.0
2023-05-11 16:35:14.501 debug zigbee-herdsman:deconz:driver send read device state from queue. seqNr: 139
zigbee.0
2023-05-11 16:35:08.627 error No converter available for 'V3-BTZB/V3-BTZBE' with key 'lock_state'
zigbee.0
2023-05-11 16:35:08.627 debug Mapped Model: {"zigbeeModel":["V3-BTZB","V3-BTZBE"],"model":"V3-BTZB/V3-BTZBE","vendor":"Danalock","description":"BT/ZB smartlock","fromZigbee":[{"cluster":"closuresDoorLock","type":["attributeReport","readResponse"]},{"cluster":"closuresDoorLock","type":"commandOperationEventNotification"},{"cluster":"genPowerCfg","type":["attributeReport","readResponse"]},{"cluster":"closuresDoorLock","type":"commandProgrammingEventNotification"},{"cluster":"closuresDoorLock","type":["commandGetPinCodeRsp"],"options":[{"type":"binary","name":"expose_pin","property":"expose_pin","access":2,"value_on":true,"value_off":false,"description":"Expose pin of this lock in the published payload (default false)."}]}],"toZigbee":[{"key":["state"]},{"key":["pin_code"]},{"key":["user_status"]},{"key":["scene_store"]},{"key":["scene_recall"]},{"key":["scene_add"]},{"key":["scene_remove"]},{"key":["scene_remove_all"]},{"key":["read"]},{"key":["write"]},{"key":["command"]},{"key":["reset"]}],"meta":{"pinCodeCount":20},"exposes":[{"type":"lock","features":[{"type":"binary","name":"state","property":"state","access":7,"value_on":"LOCK","value_off":"UNLOCK","description":"State of the lock"},{"type":"enum","name":"lock_state","property":"lock_state","access":1,"values":["not_fully_locked","locked","unlocked"],"description":"Actual state of the lock"}]},{"type":"numeric","name":"battery","property":"battery","access":1,"unit":"%","description":"Remaining battery in %","value_min":0,"value_max":100},{"type":"composite","property":"pin_code","name":"pin_code","features":[{"type":"numeric","name":"user","property":"user","access":2,"description":"User ID to set or clear the pincode for"},{"type":"enum","name":"user_type","property":"user_type","access":2,"values":["unrestricted","year_day_schedule","week_day_schedule","master","non_access"],"description":"Type of user, unrestricted: owner (default), (year|week)_day_schedule: user has ability to open lock based on specific time period, master: user has ability to both program and operate the door lock, non_access: user is recognized by the lock but does not have the ability to open the lock"},{"type":"binary","name":"user_enabled","property":"user_enabled","access":2,"value_on":true,"value_off":false,"description":"Whether the user is enabled/disabled"},{"type":"numeric","name":"pin_code","property":"pin_code","access":2,"description":"Pincode to set, set pincode to null to clear"}]},{"type":"enum","name":"action","property":"action","access":1,"values":["unknown","lock","unlock","lock_failure_invalid_pin_or_id","lock_failure_invalid_schedule","unlock_failure_invalid_pin_or_id","unlock_failure_invalid_schedule","one_touch_lock","key_lock","key_unlock","auto_lock","schedule_lock","schedule_unlock","manual_lock","manual_unlock","non_access_user_operational_event"],"description":"Triggered action on the lock"},{"type":"enum","name":"action_source_name","property":"action_source_name","access":1,"values":["keypad","rfid","manual","rf"],"description":"Source of the triggered action on the lock"},{"type":"numeric","name":"action_user","property":"action_user","access":1,"description":"ID of user that triggered the action on the lock"},{"type":"numeric","name":"linkquality","property":"linkquality","access":1,"unit":"lqi","description":"Link quality (signal strength)","value_min":0,"value_max":255}],"options":[{"type":"binary","name":"expose_pin","property":"expose_pin","access":2,"value_on":true,"value_off":false,"description":"Expose pin of this lock in the published payload (default false)."}]}
zigbee.0
2023-05-11 16:35:08.626 debug entity: {"type":"device","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":12,"_type":"EndDevice","_ieeeAddr":"0x588e81fffe43d051","_networkAddress":19351,"_manufacturerID":4444,"_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":1,"profileID":260,"deviceID":10,"inputClusters":[0,1,3,9,32,257,2821,64767],"outputClusters":[25],"deviceNetworkAddress":19351,"deviceIeeeAddress":"0x588e81fffe43d051","clusters":{"genBasic":{"attributes":{"modelId":"V3-BTZBE","manufacturerName":"Danalock","powerSource":3,"zclVersion":3,"appVersion":3,"hwVersion":5,"dateCode":"20211123"}},"genPollCtrl":{"attributes":{"checkinInterval":14400}},"genPowerCfg":{"attributes":{"batteryPercentageRemaining":174}},"closuresDoorLock":{"attributes":{"lockState":2}}},"_binds":[{"cluster":32,"type":"endpoint","deviceIeeeAddress":"0x00212effff096027","endpointID":1},{"cluster":257,"type":"endpoint","deviceIeeeAddress":"0x00212effff096027","endpointID":1},{"cluster":1,"type":"endpoint","deviceIeeeAddress":"0x00212effff096027","endpointID":1}],"_configuredReportings":[{"cluster":257,"attrId":0,"minRepIntval":0,"maxRepIntval":3600,"repChange":0},{"cluster":1,"attrId":33,"minRepIntval":3600,"maxRepIntval":62000,"repChange":0}],"meta":{},"pendingRequests":[]}],"_manufacturerName":"Danalock","_powerSource":"Battery","_modelID":"V3-BTZBE","_applicationVersion":3,"_zclVersion":3,"_hardwareVersion":5,"_dateCode":"20211123","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"_skipTimeResponse":false,"meta":{"configured":923668394},"_lastSeen":1683815496579,"_defaultSendRequestWhen":"active","_linkquality":255,"_lastDefaultResponseSequenceNumber":33},"mapped":{"zigbeeModel":["V3-BTZB","V3-BTZBE"],"model":"V3-BTZB/V3-BTZBE","vendor":"Danalock","description":"BT/ZB smartlock","fromZigbee":[{"cluster":"closuresDoorLock","type":["attributeReport","readResponse"]},{"cluster":"closuresDoorLock","type":"commandOperationEventNotification"},{"cluster":"genPowerCfg","type":["attributeReport","readResponse"]},{"cluster":"closuresDoorLock","type":"commandProgrammingEventNotification"},{"cluster":"closuresDoorLock","type":["commandGetPinCodeRsp"],"options":[{"type":"binary","name":"expose_pin","property":"expose_pin","access":2,"value_on":true,"value_off":false,"description":"Expose pin of this lock in the published payload (default false)."}]}],"toZigbee":[{"key":["state"]},{"key":["pin_code"]},{"key":["user_status"]},{"key":["scene_store"]},{"key":["scene_recall"]},{"key":["scene_add"]},{"key":["scene_remove"]},{"key":["scene_remove_all"]},{"key":["read"]},{"key":["write"]},{"key":["command"]},{"key":["reset"]}],"meta":{"pinCodeCount":20},"exposes":[{"type":"lock","features":[{"type":"binary","name":"state","property":"state","access":7,"value_on":"LOCK","value_off":"UNLOCK","description":"State of the lock"},{"type":"enum","name":"lock_state","property":"lock_state","access":1,"values":["not_fully_locked","locked","unlocked"],"description":"Actual state of the lock"}]},{"type":"numeric","name":"battery","property":"battery","access":1,"unit":"%","description":"Remaining battery in %","value_min":0,"value_max":100},{"type":"composite","property":"pin_code","name":"pin_code","features":[{"type":"numeric","name":"user","property":"user","access":2,"description":"User ID to set or clear the pincode for"},{"type":"enum","name":"user_type","property":"user_type","access":2,"values":["unrestricted","year_day_schedule","week_day_schedule","master","non_access"],"description":"Type of user, unrestricted: owner (default), (year|week)_day_schedule: user has ability to open lock based on specific time period, master: user has ability to both program and operate the door lock, non_access: user is recognized by the lock but does not have the ability to open the lock"},{"type":"binary","name":"user_enabled","property":"user_enabled","access":2,"value_on":true,"value_off":false,"description":"Whether the user is enabled/disabled"},{"type":"numeric","name":"pin_code","property":"pin_code","access":2,"description":"Pincode to set, set pincode to null to clear"}]},{"type":"enum","name":"action","property":"action","access":1,"values":["unknown","lock","unlock","lock_failure_invalid_pin_or_id","lock_failure_invalid_schedule","unlock_failure_invalid_pin_or_id","unlock_failure_invalid_schedule","one_touch_lock","key_lock","key_unlock","auto_lock","schedule_lock","schedule_unlock","manual_lock","manual_unlock","non_access_user_operational_event"],"description":"Triggered action on the lock"},{"type":"enum","name":"action_source_name","property":"action_source_name","access":1,"values":["keypad","rfid","manual","rf"],"description":"Source of the triggered action on the lock"},{"type":"numeric","name":"action_user","property":"action_user","access":1,"description":"ID of user that triggered the action on the lock"},{"type":"numeric","name":"linkquality","property":"linkquality","access":1,"unit":"lqi","description":"Link quality (signal strength)","value_min":0,"value_max":255}],"options":["[Circular]"]},"endpoint":"[Circular]","endpoints":"[Circular]","name":"0x588e81fffe43d051"}
zigbee.0
2023-05-11 16:35:08.623 debug Change state 'lock_state' at device 0x588e81fffe43d051 type 'V3-BTZB/V3-BTZBE'
zigbee.0
2023-05-11 16:35:08.576 debug User stateChange zigbee.0.588e81fffe43d051.lock_state {"val":"unlocked","ack":false,"ts":1683815708574,"q":0,"from":"system.adapter.admin.0","user":"system.user.admin","lc":1683815708574}
admin.0
2023-05-11 16:35:08.572 warn Read-only state "zigbee.0.588e81fffe43d051.lock_state" has been written without ack-flag with value "unlocked"
@djmarc75
ich habe jetzt nochmal den Adapter neu installiert und sieh da - es geht nun.
Vielen Dank für Deine Hilfe
Hallo,
ich habe den IOBroker auf einen anderen Server umgezogen und alle Einstellungen wiederhergestellt.
Hat super funktioniert.
Nur meine Shellys lassen sich nicht mehr schalten. Die Einstellungen wurden importiert und das log zeigt auch was an:
shelly.0
2023-05-06 16:04:15.606 debug [deviceStatusUpdate] SHSW-1#BCDDC277409E#1: true
shelly.0
2023-05-06 16:04:15.567 debug [deviceStatusUpdate] SHSW-25#BCDDC277BC02#1: true
shelly.0
2023-05-06 16:04:15.513 debug [deviceStatusUpdate] SHSW-1#F41DE8#1: true
shelly.0
2023-05-06 16:04:15.508 debug [deviceStatusUpdate] SHSW-25#BCDDC2779762#1: true
shelly.0
2023-05-06 16:04:15.504 debug [onlineCheck] Checking SHSW-25#BCDDC277BC02#1 on 192.168.178.123:80
shelly.0
2023-05-06 16:04:15.503 debug [onlineCheck] Checking SHSW-25#BCDDC2779762#1 on 192.168.178.122:80
shelly.0
2023-05-06 16:04:15.502 debug [onlineCheck] Checking SHSW-1#F41DE8#1 on 192.168.178.121:80
shelly.0
2023-05-06 16:04:15.501 debug [onlineCheck] Checking SHSW-1#BCDDC277409E#1 on 192.168.178.120:80
shelly.0
2023-05-06 16:03:15.502 debug [deviceStatusUpdate] SHSW-1#F41DE8#1: true
shelly.0
2023-05-06 16:03:15.498 debug [deviceStatusUpdate] SHSW-1#BCDDC277409E#1: true
shelly.0
2023-05-06 16:03:15.497 debug [deviceStatusUpdate] SHSW-25#BCDDC277BC02#1: true
shelly.0
2023-05-06 16:03:15.496 debug [deviceStatusUpdate] SHSW-25#BCDDC2779762#1: true
shelly.0
2023-05-06 16:03:15.491 debug [onlineCheck] Checking SHSW-25#BCDDC277BC02#1 on 192.168.178.123:80
shelly.0
2023-05-06 16:03:15.489 debug [onlineCheck] Checking SHSW-25#BCDDC2779762#1 on 192.168.178.122:80
shelly.0
2023-05-06 16:03:15.487 debug [onlineCheck] Checking SHSW-1#F41DE8#1 on 192.168.178.121:80
shelly.0
2023-05-06 16:03:15.485 debug [onlineCheck] Checking SHSW-1#BCDDC277409E#1 on 192.168.178.120:80
shelly.0
2023-05-06 16:02:15.490 debug [deviceStatusUpdate] SHSW-1#F41DE8#1: true
shelly.0
2023-05-06 16:02:15.483 debug [deviceStatusUpdate] SHSW-25#BCDDC2779762#1: true
shelly.0
2023-05-06 16:02:15.481 debug [deviceStatusUpdate] SHSW-25#BCDDC277BC02#1: true
shelly.0
2023-05-06 16:02:15.480 debug [deviceStatusUpdate] SHSW-1#BCDDC277409E#1: true
shelly.0
2023-05-06 16:02:15.473 debug [onlineCheck] Checking SHSW-25#BCDDC277BC02#1 on 192.168.178.123:80
shelly.0
2023-05-06 16:02:15.471 debug [onlineCheck] Checking SHSW-25#BCDDC2779762#1 on 192.168.178.122:80
shelly.0
2023-05-06 16:02:15.469 debug [onlineCheck] Checking SHSW-1#F41DE8#1 on 192.168.178.121:80
shelly.0
2023-05-06 16:02:15.467 debug [onlineCheck] Checking SHSW-1#BCDDC277409E#1 on 192.168.178.120:80
shelly.0
2023-05-06 16:01:15.483 debug [deviceStatusUpdate] SHSW-1#BCDDC277409E#1: true
shelly.0
2023-05-06 16:01:15.470 debug [deviceStatusUpdate] SHSW-25#BCDDC2779762#1: true
shelly.0
2023-05-06 16:01:15.464 debug [deviceStatusUpdate] SHSW-25#BCDDC277BC02#1: true
shelly.0
2023-05-06 16:01:15.462 debug [deviceStatusUpdate] SHSW-1#F41DE8#1: true
shelly.0
2023-05-06 16:01:15.455 debug [onlineCheck] Checking SHSW-25#BCDDC277BC02#1 on 192.168.178.123:80
shelly.0
2023-05-06 16:01:15.453 debug [onlineCheck] Checking SHSW-25#BCDDC2779762#1 on 192.168.178.122:80
shelly.0
2023-05-06 16:01:15.451 debug [onlineCheck] Checking SHSW-1#F41DE8#1 on 192.168.178.121:80
shelly.0
2023-05-06 16:01:15.449 debug [onlineCheck] Checking SHSW-1#BCDDC277409E#1 on 192.168.178.120:80
shelly.0
2023-05-06 16:00:15.479 debug [deviceStatusUpdate] SHSW-25#BCDDC277BC02#1: true
shelly.0
2023-05-06 16:00:15.477 debug [deviceStatusUpdate] SHSW-1#BCDDC277409E#1: true
shelly.0
2023-05-06 16:00:15.476 debug [deviceStatusUpdate] SHSW-1#F41DE8#1: true
shelly.0
2023-05-06 16:00:15.471 debug [deviceStatusUpdate] SHSW-25#BCDDC2779762#1: true
shelly.0
2023-05-06 16:00:15.437 debug [onlineCheck] Checking SHSW-25#BCDDC277BC02#1 on 192.168.178.123:80
shelly.0
2023-05-06 16:00:15.435 debug [onlineCheck] Checking SHSW-25#BCDDC2779762#1 on 192.168.178.122:80
shelly.0
2023-05-06 16:00:15.433 debug [onlineCheck] Checking SHSW-1#F41DE8#1 on 192.168.178.121:80
shelly.0
2023-05-06 16:00:15.431 debug [onlineCheck] Checking SHSW-1#BCDDC277409E#1 on 192.168.178.120:80
Der Port des Adapters ist auf 1883 gestellt, was von der Sicherung übernommen wurde.
Auch die Einstellungen wurden aus dem Backup übernommen.
Hat jemenad eine Idee, was hier falsch gelaufen ist?
@thomas-braun said in Exec aplay:
sudo -u iobroker aplay -D hw:1 /home/server/Music/test.wav
Ja, funktioniert.
Herzlichen Dank!
Ich habe den Benutzer iobroker mal zu den sudoern hinzugefügt.
Bringt aber keine Änderung.