NEWS

xxx_turbo_xxx

@klassisch Um ehrlich zu sein hab ich wenig Ahnung von dem gangen Elektronikgedöns. Leider...

Ich hab im Netzt die Anleitung gefunden und hab sie nachgebaut. Anscheinend funktioniert es so und frei nach dem Motto..."Never touch a runnig System" werd ich es so beibehalten

Ich hab das Ding installiert weil meine beiden großen Töchter anscheinend etwas länger in der dusche verweilen, als es eigentlich nötig wäre :-).

Außerdem experimentiere ich mit Durchflussminderer und wollte sehen, was die bringen.

Wenn ich die Trennung nicht mache, dann bleibt der Zähler immer beim letzten Wert stehen, obwohl kein Wasser mehr fließt. Hab es aber jetzt selber hin gebracht. Bezweifle, dass das die eleganteste Lösung ist, aber es scheint zu funktionieren.

xxx_turbo_xxx

@Glasfaser Ich brauch keinen View. Will die Heizung auch (noch) nicht per ioBroker steuern. Ich will nur wissen was die Heizung wann macht. Denn meiner Meinung nach ist die Regelung der Heizung ziemlich dumm.

Konnte so die Einstellung meiner Heizung optimieren und den Jahresverbrauch von 8000kWh auf 5000kWh reduzieren.

xxx_turbo_xxx

@klassisch Zeitgemäßer Wasserzähler...

xxx_turbo_xxx

@codierknecht Danke euch alen für euer Feedback und die Hilfe!

Aber... da der Arbeitsspeicher nicht voll ausgelastet ist, sollte der Swap da kaum Einfluss haben, zumal die Maschine ja in dieser Konfiguration und der Anzahl der aktiven Instanzen seit 3 Jahren stabil lief. Das Problem ist, dass wir hier auf dem Land öfter mal nen Stromausfall haben. Ich fürchte der Grund liegt eher an dem angesprochenen Dateisystem.

Ich habe den Raspi gestern komplett neu aufgesetzt (mit einer anderen SSD) und seitdem läuft er wieder stabil. Meine langfristige Lösung wäre nun das Verwenden eine UPS, sodass der Raspi im Idealfall immer sauber herunter gefahren werden kann. Werde dann weiter verfolgen, ob das Problem weiterhin besteht. Falls ja, muss ich über einen Wechsel zu eine leistungsstärkeren Hardware suchen.

xxx_turbo_xxx

@djmarc75 said in ioBroker / Raspi plötzlich nicht mehr erreichbar:

free -h

pi@raspberrypi:~ $ free -h
               total        used        free      shared  buff/cache   available
Mem:           3.7Gi       2.3Gi        90Mi       0.0Ki       1.3Gi       1.4Gi
Swap:           99Mi        99Mi       0.0Ki

xxx_turbo_xxx

@djmarc75 Da sehe ich auf den ersten Blick keine Auffälligkeiten. Aber ich schätze, die würde ich dann auch nur sehen, wenn es soweit ist. In dem Fall könnte ich ja wieder nicht auf da System zugreifen!?

Hab aber auch die Systemdaten geloggt und da springt mir jetzt auch nichts ins Auge, was schief laufen könnte...

xxx_turbo_xxx

@samson71 Ich bin eben auch leider linuxtechnisch nicht die hellste Kerze auf der Torte
Hab allerdings folgendes gefunden, was in meinen Augen durchaus Sinn machen könnte...

Glaube nicht, dass es am ioBroker liegt, denn auf Grafana komm ich ja auch nicht drauf. Und SSH ist ja auch unabhängig vom ioBroker?! Dennoch hier der das Diagfeedback

======== Start marking the full check here =========


Skript v.2023-10-10

*** BASE SYSTEM ***
   Static hostname: raspberrypi
         Icon name: computer
  Operating System: Debian GNU/Linux 11 (bullseye)
            Kernel: Linux 6.1.21-v8+
      Architecture: arm64

Model           : Raspberry Pi 4 Model B Rev 1.1
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : arm64

Systemuptime and Load:
 08:33:27 up 3 min,  1 user,  load average: 4.46, 2.38, 0.97
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Mon 2024-02-12 08:33:27 CET
           Universal time: Mon 2024-02-12 07:33:27 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.8G        2.3G        279M        1.0M        1.3G        1.5G
Swap:            99M        8.0M         91M
Total:          3.9G        2.3G        371M

         3793 M total memory
         2261 M used memory
         2260 M active memory
         1115 M inactive memory
          279 M free memory
           23 M buffer memory
         1229 M swap cache
           99 M total swap
            8 M used swap
           91 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       29G   13G   16G  46% /
devtmpfs       devtmpfs  1.7G     0  1.7G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     759M  2.8M  756M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/sda1      vfat      255M   31M  225M  13% /boot
tmpfs          tmpfs     380M     0  380M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Mon Feb 12 08:29:52 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=DC:A6:32:61:3D:A3 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=0653b15a-02 rootfstype=ext4 fsck.repair=yes rootwait
[Mon Feb 12 08:29:54 2024] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
[Mon Feb 12 08:29:54 2024] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[Mon Feb 12 08:29:55 2024] EXT4-fs (sda2): re-mounted. Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET  SOURCE    FSTYPE OPTIONS
/       /dev/sda2 ext4   rw,noatime
`-/boot /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
8.7G    /var/
4.3G    /var/log
3.0G    /var/log/journal/e0861a26638647d99394b16663d4302a
3.0G    /var/log/journal
2.8G    /var/lib

Archived and active journals take up 2.9G in the file system.

/opt/iobroker/backups:
4.0K    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
404M    /opt/iobroker/iobroker-data/
235M    /opt/iobroker/iobroker-data/files
78M     /opt/iobroker/iobroker-data/backup-objects
67M     /opt/iobroker/iobroker-data/files/javascript.admin
48M     /opt/iobroker/iobroker-data/files/javascript.admin/static

The five largest files in iobroker-data are:
58M     /opt/iobroker/iobroker-data/states.jsonl
34M     /opt/iobroker/iobroker-data/objects.jsonl
33M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map
22M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.c05ba1d3.js.map
22M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.578d79d9.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-FTDI_FT230X_Basic_UART_D306Z6KP-if00-port0
/dev/serial/by-id/usb-FTDI_FT230X_Basic_UART_D306YVGN-if00-port0

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.19.0
/usr/bin/node           v18.19.0
/usr/bin/npm            10.2.3
/usr/bin/npx            10.2.3
/usr/bin/corepack       0.22.0


nodejs:
  Installed: 18.19.0-1nodesource1
  Candidate: 18.19.0-1nodesource1
  Version table:
 *** 18.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     12.22.12~dfsg-1~deb11u4 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.17
admin:          6.13.16
javascript:     7.1.6

Adapters from github:   4

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.alexa2.0                 : alexa2                : raspberrypi                              -  enabled
+ system.adapter.apsystems-ecu.0          : apsystems-ecu         : raspberrypi                              -  enabled
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
  system.adapter.benchmark.0              : benchmark             : raspberrypi                              - disabled
  system.adapter.canbus.0                 : canbus                : raspberrypi                              - disabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
+ system.adapter.ds18b20.0                : ds18b20               : raspberrypi                              -  enabled
  system.adapter.dwd.0                    : dwd                   : raspberrypi                              -  enabled
+ system.adapter.ebus.0                   : ebus                  : raspberrypi                              -  enabled
  system.adapter.flot.0                   : flot                  : raspberrypi                              - disabled
+ system.adapter.followthesun.0           : followthesun          : raspberrypi                              -  enabled
+ system.adapter.fritzdect.0              : fritzdect             : raspberrypi                              -  enabled
  system.adapter.garmin.0                 : garmin                : raspberrypi                              - disabled
+ system.adapter.hue-extended.0           : hue-extended          : raspberrypi                              -  enabled
+ system.adapter.influxdb.0               : influxdb              : raspberrypi                              -  enabled, port: 8086
+ system.adapter.iot.0                    : iot                   : raspberrypi                              -  enabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
  system.adapter.mobile.0                 : mobile                : raspberrypi                              - disabled
+ system.adapter.modbus.0                 : modbus                : raspberrypi                              -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.octoprint.0              : octoprint             : raspberrypi                              -  enabled
  system.adapter.openweathermap.0         : openweathermap        : raspberrypi                              -  enabled
+ system.adapter.ping.0                   : ping                  : raspberrypi                              -  enabled
+ system.adapter.pollenflug.0             : pollenflug            : raspberrypi                              -  enabled
+ system.adapter.pushover.0               : pushover              : raspberrypi                              -  enabled
  system.adapter.samsung.0                : samsung               : raspberrypi                              - disabled
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.smartmeter.0             : smartmeter            : raspberrypi                              -  enabled
+ system.adapter.smartmeter.1             : smartmeter            : raspberrypi                              -  enabled
+ system.adapter.tado.0                   : tado                  : raspberrypi                              -  enabled
+ system.adapter.tankerkoenig.0           : tankerkoenig          : raspberrypi                              -  enabled
+ system.adapter.upnp.0                   : upnp                  : raspberrypi                              -  enabled
+ system.adapter.vaillant.0               : vaillant              : raspberrypi                              -  enabled
  system.adapter.vis.0                    : vis                   : raspberrypi                              - disabled
+ system.adapter.vw-connect.0             : vw-connect            : raspberrypi                              -  enabled
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.whatsapp-cmb.0           : whatsapp-cmb          : raspberrypi                              - disabled
+ system.adapter.yahka.0                  : yahka                 : raspberrypi                              -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.influxdb.0               : influxdb              : raspberrypi                              -  enabled, port: 8086
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.13.16  , installed 6.13.16
Adapter    "alexa2"       : 3.26.4   , installed 3.26.4
Adapter    "backitup"     : 2.9.8    , installed 2.9.8
Adapter    "benchmark"    : 1.1.4    , installed 1.1.4
Adapter    "canbus"       : 1.3.1    , installed 1.3.1
Adapter    "discovery"    : 4.2.0    , installed 4.2.0
Adapter    "ds18b20"      : 2.0.5    , installed 2.0.5
Adapter    "dwd"          : 2.8.5    , installed 2.8.5
Adapter    "ebus"         : 3.2.5    , installed 3.2.5
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "followthesun" : 0.5.0    , installed 0.5.0
Adapter    "fritzdect"    : 2.5.9    , installed 2.5.9
Adapter    "garmin"       : 0.0.3    , installed 0.1.0
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "iot"          : 2.0.11   , installed 2.0.11
Adapter    "javascript"   : 7.1.6    , installed 7.1.6
Controller "js-controller": 5.0.17   , installed 5.0.17
Adapter    "mobile"       : 1.0.1    , installed 1.0.1
Adapter    "modbus"       : 6.1.0    , installed 6.1.0
Adapter    "mqtt"         : 5.1.0    , installed 5.1.0
Adapter    "octoprint"    : 5.1.0    , installed 5.1.0
Adapter    "openweathermap": 1.0.4   , installed 1.0.4
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "pollenflug"   : 1.0.6    , installed 1.0.6
Adapter    "pushover"     : 3.0.6    , installed 3.0.6
Adapter    "samsung"      : 0.5.11   , installed 0.5.11
Adapter    "shelly"       : 6.6.1    , installed 6.6.1
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartmeter"   : 3.4.0    , installed 3.4.0
Adapter    "socketio"     : 6.6.0    , installed 6.6.0
Adapter    "tado"         : 0.5.3    , installed 0.5.3
Adapter    "tankerkoenig" : 3.3.7    , installed 3.3.7
Adapter    "upnp"         : 1.0.21   , installed 1.0.21
Adapter    "vaillant"     : 0.1.2    , installed 0.2.0
Adapter    "vis"          : 1.5.4    , installed 1.5.4
Adapter    "vw-connect"   : 0.0.67   , installed 0.1.3
Adapter    "web"          : 6.2.3    , installed 6.2.3
Adapter    "whatsapp-cmb" : 0.2.3    , installed 0.2.3
Adapter    "ws"           : 2.5.10   , installed 2.5.10
Adapter    "yahka"        : 1.0.3    , installed 1.0.3

Objects and States
Please stand by - This may take a while
Objects:        38899
States:         30939

*** OS-Repositories and Updates ***
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://apt.grafana.com stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
W: Failed to fetch https://apt.grafana.com/dists/stable/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
W: Some index files failed to download. They have been ignored, or old ones used instead.
Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:3 http://deb.debian.org/debian bullseye-updates InRelease
Hit:4 http://security.debian.org/debian-security bullseye-security InRelease
Hit:5 https://repos.influxdata.com/debian stable InRelease
Get:6 https://apt.grafana.com stable InRelease [5984 B]
Hit:7 https://repo.ebusd.eu/apt/nomqtt/bullseye bullseye InRelease
Hit:8 https://deb.nodesource.com/node_18.x nodistro InRelease
Err:6 https://apt.grafana.com stable InRelease
  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
Reading package lists...
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://apt.grafana.com stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
W: Failed to fetch https://apt.grafana.com/dists/stable/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
W: Some index files failed to download. They have been ignored, or old ones used instead.
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       12218      843/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       13787      843/iobroker.js-con
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       14005      996/io.mqtt.0
tcp        0      0 0.0.0.0:8889            0.0.0.0:*               LISTEN      0          14873      774/ebusd
tcp        0      0 0.0.0.0:8888            0.0.0.0:*               LISTEN      0          14872      774/ebusd
tcp        0      0 0.0.0.0:39623           0.0.0.0:*               LISTEN      1001       19223      1488/io.yahka.0
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN      999        11219      695/influxd
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          14688      558/sshd: /usr/sbin
tcp        0      0 0.0.0.0:139             0.0.0.0:*               LISTEN      0          15388      798/smbd
tcp        0      0 0.0.0.0:445             0.0.0.0:*               LISTEN      0          15387      798/smbd
tcp6       0      0 :::8086                 :::*                    LISTEN      999        13740      695/influxd
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       19185      1475/io.web.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       12259      877/io.admin.0
tcp6       0      0 :::3000                 :::*                    LISTEN      110        13807      842/grafana
tcp6       0      0 :::22                   :::*                    LISTEN      0          11146      558/sshd: /usr/sbin
tcp6       0      0 :::38977                :::*                    LISTEN      1001       19220      1488/io.yahka.0
tcp6       0      0 :::139                  :::*                    LISTEN      0          15386      798/smbd
tcp6       0      0 :::445                  :::*                    LISTEN      0          15385      798/smbd
udp        0      0 0.0.0.0:44088           0.0.0.0:*                           1001       19008      1416/io.upnp.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        11048      446/avahi-daemon: r
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       14090      1037/io.shelly.0
udp        0      0 0.0.0.0:1900            0.0.0.0:*                           1001       19180      1416/io.upnp.0
udp        0      0 0.0.0.0:43025           0.0.0.0:*                           108        11050      446/avahi-daemon: r
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          13593      689/dhcpcd
udp        0      0 192.168.1.255:137       0.0.0.0:*                           0          11245      692/nmbd
udp        0      0 192.168.1.77:137        0.0.0.0:*                           0          11244      692/nmbd
udp        0      0 0.0.0.0:137             0.0.0.0:*                           0          11228      692/nmbd
udp        0      0 192.168.1.255:138       0.0.0.0:*                           0          11247      692/nmbd
udp        0      0 192.168.1.77:138        0.0.0.0:*                           0          11246      692/nmbd
udp        0      0 0.0.0.0:138             0.0.0.0:*                           0          11229      692/nmbd
udp6       0      0 :::5353                 :::*                                108        11049      446/avahi-daemon: r
udp6       0      0 :::57572                :::*                                108        11051      446/avahi-daemon: r

*** Log File - Last 25 Lines ***

2024-02-12 08:35:16.765  - info: smartmeter.0 (1044) Received 7 values, 3 updated
2024-02-12 08:35:18.533  - debug: apsystems-ecu.0 (1524) Ecu.ecuStateMachine(evCycleTimer) stWaitForNextCycle -> stWaitForConnect
2024-02-12 08:35:18.534  - debug: apsystems-ecu.0 (1524) Ecu.trConnect() hide=true, ip=192.168.1.149 port=8899
2024-02-12 08:35:18.627  - debug: apsystems-ecu.0 (1524) Ecu.ecuStateMachine(evConnected) stWaitForConnect -> stWaitForResponse
2024-02-12 08:35:18.628  - debug: apsystems-ecu.0 (1524) Ecu.trServiceSM2(evRepeatService) stPowerOfDay->stEnergyOfWeek
2024-02-12 08:35:18.629  - debug: apsystems-ecu.0 (1524) Ecu.trServiceSM2(recursion) stEnergyOfWeek->stEnergyOfMonth
2024-02-12 08:35:18.630  - debug: apsystems-ecu.0 (1524) Ecu.trServiceSM2(recursion) stEnergyOfMonth->stEnergyOfYear
2024-02-12 08:35:18.630  - debug: apsystems-ecu.0 (1524) Ecu.trServiceSM2(recursion) stEnergyOfYear->stSystemInfo
2024-02-12 08:35:18.631  - debug: apsystems-ecu.0 (1524) Ecu.trServiceSM2(recursion/216300149895) stSystemInfo->stSystemInfo
2024-02-12 08:35:18.632  - debug: apsystems-ecu.0 (1524) Ecu.reqService(SYSTEMINFO req:APS1100160001END)
2024-02-12 08:35:18.633  - debug: apsystems-ecu.0 (1524) Ecu.trServiceSM2(recursion) stSystemInfo->stRealTimeData
2024-02-12 08:35:18.656  - debug: apsystems-ecu.0 (1524) Ecu.decodeRsp() 24ms - 41,50,53,31,31,30,30,39,34,30,30,30,31,32,31,36,33,30,30,30,30,30,30,30,30,30,31,0,0,2,5a,0,0,0,0,0,0,0,0,d0,d0,d0,d0,d0,d0,d0,0,1,0,0,31,30,30,31,32,45,43,55,5f,42,5f,31,2e,32,2e,32,39,30,30,39,45,74,63,2f,47,4d,54,2d,38,80,97,1b,c,24,15,0,0,0,0,0,0,45,4e,44
2024-02-12 08:35:18.658  - debug: apsystems-ecu.0 (1524) Ecu.decodeAndProcessSystemInfo() - version: ECU_B_1.2.29 - done
2024-02-12 08:35:18.659  - debug: apsystems-ecu.0 (1524) Ecu.ecuStateMachine(evResponseOk) stWaitForResponse -> stWaitForDisconnected
2024-02-12 08:35:18.660  - debug: apsystems-ecu.0 (1524) Ecu.trDisconnect() - done
2024-02-12 08:35:18.660  - debug: apsystems-ecu.0 (1524) Ecu.ecuStateMachine(evDisconnected) stWaitForDisconnected -> stWaitForNextCycle
2024-02-12 08:35:18.661  - debug: apsystems-ecu.0 (1524) Ecu.trNextCycle() 15sec delay
2024-02-12 08:35:23.772  - info: javascript.0 (917) script.js.common.Solar.Tag_Nacht: Tag
2024-02-12 08:35:23.773  - info: javascript.0 (917) script.js.common.Solar.Tag_Nacht: 07:32
2024-02-12 08:35:23.773  - info: javascript.0 (917) script.js.common.Solar.Tag_Nacht: 18:09
2024-02-12 08:35:23.919  - info: smartmeter.1 (1055) Received 9 values, 6 updated
2024-02-12 08:35:28.586  - info: javascript.0 (917) script.js.common.Solar.Tag_Nacht: Tag
2024-02-12 08:35:28.587  - info: javascript.0 (917) script.js.common.Solar.Tag_Nacht: 07:32
2024-02-12 08:35:28.588  - info: javascript.0 (917) script.js.common.Solar.Tag_Nacht: 18:09
2024-02-12 08:35:28.612  - info: smartmeter.0 (1044) Received 7 values, 3 updated




======================= SUMMARY =======================
                        v.2023-10-10


   Static hostname: raspberrypi
         Icon name: computer
  Operating System: Debian GNU/Linux 11 (bullseye)
            Kernel: Linux 6.1.21-v8+
      Architecture: arm64

Installation:           native
Kernel:                 aarch64
Userland:               arm64
Timezone:               Europe/Berlin (CET, +0100)
User-ID:                1000
X-Server:               false
Boot Target:            multi-user.target

Pending OS-Updates:     0
Pending iob updates:    0

Nodejs-Installation:    /usr/bin/nodejs         v18.19.0
                        /usr/bin/node           v18.19.0
                        /usr/bin/npm            10.2.3
                        /usr/bin/npx            10.2.3
                        /usr/bin/corepack       0.22.0

Recommended versions are nodejs 18.19.0 and npm 10.2.3
Your nodejs installation is correct

MEMORY:
               total        used        free      shared  buff/cache   available
Mem:            3.8G        2.2G        142M        0.0K        1.5G        1.6G
Swap:            99M         99M        0.0K
Total:          3.9G        2.3G        142M

Active iob-Instances:   30
Active repo(s): stable

ioBroker Core:          js-controller           5.0.17
                        admin                   6.13.16

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                38899
States:                 30939

Size of iob-Database:

38M     /opt/iobroker/iobroker-data/objects.jsonl
61M     /opt/iobroker/iobroker-data/states.jsonl



=================== END OF SUMMARY ====================

xxx_turbo_xxx

@samson71 ja, Neustart über Stromversorgung. Anders ist der Raspi ja nicht mehr erreichbar. Gibt es da na Lösung das Dateisystem zu reparieren?
Aber... Wenn das Dateisystem kaputt wäre, dann könnte ich wahrscheinlich gar nix mehr machen? Er läuft ja dann wieder für ne halbe Stunde und ist dann erst wieder tot?!

xxx_turbo_xxx

Guten Morgen zusammen,
ich hatte in der Vergangenheit öfter mal das Problem, dass der Raspi, auf dem der ioBroker läuft plötzlich per SSH nicht mehr erreichbar war. Ebenso konnte man ioBroker und Grafana nicht mehr per Weboberfläche erreichen. Nach einem Neustart ging es wieder eine Weile. Seit gestern ist es extrem. Ein Neustart hilft nur für ein paar Minuten, dann ist er wieder weg. Ich kann den Raspi anpingen aber alles andere ist tot. Wenn ich per SSH mit PuTTy drauf will, kommt die Fehlermeldung "Network Error. Connection refused". Hat jemand eine Ahnung, woran das liegen könnte und wie ich das Problem beheben kann?

Hier noch ein paar Infos zum System:

Raspberry Pi 4 Model B
Im Netzwerk per LAN Kabel
Gebootet wird von SSD (keine SD Karte installiert)

Danke für eure Hilfe!

xxx_turbo_xxx

ah, ok... verstehe

Da liegen auch welche...


pi@raspberrypi:/usr/share/keyrings $ dir
debian-archive-bullseye-automatic.gpg           debian-archive-buster-security-automatic.gpg  debian-archive-stretch-automatic.gpg           influxdb-archive-keyring.gpg     raspberrypi-archive-removed-keys.gpg
debian-archive-bullseye-security-automatic.gpg  debian-archive-buster-stable.gpg              debian-archive-stretch-security-automatic.gpg  influxdb.gpg                     raspberrypi-archive-stable.gpg
debian-archive-bullseye-stable.gpg              debian-archive-keyring.gpg                    debian-archive-stretch-stable.gpg              nodesource.gpg
debian-archive-buster-automatic.gpg             debian-archive-removed-keys.gpg               grafana.key                                    raspberrypi-archive-keyring.gpg

xxx_turbo_xxx

@thomas-braun ok, wo sollte er sonst liegen?

xxx_turbo_xxx

Das war nicht gut

hab das gemacht...

und jetzt kommt das... Verstehe nicht, was das mit Grafana zu tun hat... Das hat davor noch funktioniert...

pi@raspberrypi:/etc/apt/sources.list.d $ sudo apt-get update
Get:1 https://repos.influxdata.com/debian bullseye InRelease [7,022 B]
Hit:2 http://security.debian.org/debian-security bullseye-security InRelease
Hit:3 http://deb.debian.org/debian bullseye InRelease
Hit:4 http://deb.debian.org/debian bullseye-updates InRelease
Get:5 https://apt.grafana.com stable InRelease [5,984 B]
Hit:6 https://repo.ebusd.eu/apt/nomqtt/bullseye bullseye InRelease
Hit:7 https://deb.nodesource.com/node_16.x bullseye InRelease
Err:1 https://repos.influxdata.com/debian bullseye InRelease
  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
Get:8 https://apt.grafana.com stable/main armhf Packages [68.2 kB]
Err:8 https://apt.grafana.com stable/main armhf Packages
  File has unexpected size (67781 != 68168). Mirror sync in progress? [IP: 2a04:4e42:6f::729 443]
  Hashes of expected file:
   - Filesize:68168 [weak]
   - SHA512:219e0403856608149840204d86c1f3d0ab07a08acc07f8a8c02957ac843b40ebc292c8798d7d91dd05a5e82c1bd6125fbf6b66726670df4b54247ee0d33b0964
   - SHA256:71566d26c07ea46f56e421e023e2ed46ce903d10c8554e981da09cf3d29ccf9c
   - SHA1:eeab0b4a8a96b34bf3ab4e6381ba719344e42e7b [weak]
   - MD5Sum:f9059eccea966e300342f8bc9e027eb2 [weak]
  Release file created at: Tue, 28 Feb 2023 11:22:49 +0000
Get:9 https://apt.grafana.com stable/main arm64 Packages [70.4 kB]
Err:9 https://apt.grafana.com stable/main arm64 Packages

Hit:10 http://archive.raspberrypi.org/debian bullseye InRelease
Fetched 7,022 B in 6s (1,263 B/s)
Reading package lists... Done
N: Ignoring file 'influxdata-archive_compat.key' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Failed to fetch https://repos.influxdata.com/debian/dists/bullseye/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
E: Failed to fetch https://apt.grafana.com/dists/stable/main/binary-armhf/Packages.bz2  File has unexpected size (67781 != 68168). Mirror sync in progress? [IP: 2a04:4e42:6f::729 443]
   Hashes of expected file:
    - Filesize:68168 [weak]
    - SHA512:219e0403856608149840204d86c1f3d0ab07a08acc07f8a8c02957ac843b40ebc292c8798d7d91dd05a5e82c1bd6125fbf6b66726670df4b54247ee0d33b0964
    - SHA256:71566d26c07ea46f56e421e023e2ed46ce903d10c8554e981da09cf3d29ccf9c
    - SHA1:eeab0b4a8a96b34bf3ab4e6381ba719344e42e7b [weak]
    - MD5Sum:f9059eccea966e300342f8bc9e027eb2 [weak]
   Release file created at: Tue, 28 Feb 2023 11:22:49 +0000
E: Failed to fetch https://apt.grafana.com/dists/stable/main/binary-arm64/Packages.bz2
W: Some index files failed to download. They have been ignored, or old ones used instead.

xxx_turbo_xxx

Hallo zusammen,

ich habe seit einer Weile das Problem, dass ich beim Update von InfluxDB einen Error bekomme.

pi@raspberrypi:/etc/apt/sources.list.d $ sudo apt-get update
Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
Hit:3 https://repos.influxdata.com/debian stable InRelease
Get:4 https://repos.influxdata.com/debian bullseye InRelease [7,022 B]
Hit:5 https://apt.grafana.com stable InRelease
Hit:6 http://security.debian.org/debian-security bullseye-security InRelease
Hit:7 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:8 https://deb.nodesource.com/node_16.x bullseye InRelease
Hit:9 https://repo.ebusd.eu/apt/nomqtt/bullseye bullseye InRelease
Err:4 https://repos.influxdata.com/debian bullseye InRelease
  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
Fetched 7,022 B in 2s (3,071 B/s)
Reading package lists... Done
N: Ignoring file 'influxdata-archive_compat.key' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Failed to fetch https://repos.influxdata.com/debian/dists/bullseye/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Some index files failed to download. They have been ignored, or old ones used instead.

Ich habe 2 repos Listen für influx mit folgenden Inhalten gefunden. Frag mich warum? Eine sollte doch reichen?

influxdata.list
deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main

influxdb.list
deb [signed-by=/usr/share/keyrings/influxdb-archive-keyring.gpg] https://repos.influxdata.com/debian bullseye stable

Würde das gerne glatt ziehen und wär über Support sehr dankbar

NEWS

xxx_turbo_xxx

@xxx_turbo_xxx

Best posts made by xxx_turbo_xxx

Latest posts made by xxx_turbo_xxx