@wildbill sagte in Sonos Lautstärke um je „1“ anheben od. absenken:

Der Trigger passt ja bei Dir, anstatt "Wert = 2xxx oder 3xxx" trägst Du eben den Wert ein, den Dein Zauberwürfel da schreibt. Vermutlich kommt das nicht als string (grüner Textblock in Deinem Blockly, die 7) sondern number, dann solltest Du die blauen Zahlenblöcke aus dem Mathematik-Bereich nehmen, das weiss ich aber nicht, da ich den Zauberwürfel nicht kenne.
Ich triggere auf Tastendrücke einer Tradfri-FB. Kurzer Druck oben (2002) erhöht das Volume um 1, ein langer Druck (2001) um 10. Gleiches zum Verringern mit der unteren Taste (3xxx).
Gruss, Jürgen

EDIT: Und Du solltest "Steuere" und nicht "Aktualisiere" nehmen, da Du ja einem Adapter einen Befehl gibst, der ausgeführt (ans Gerät gesendet) werden soll. Mit Aktualisiere würdest Du nur den Datenpunkt beschreiben, ohne dass der Adapter den Befehl ausführt.

@Wildbill

Jetzt hab ich es. Danke Dir. Hier noch für Dich die Lösung:

Der Trigger ist tatsächlich ein String, hatte ich oben ja schon in meinem Beispiel
erwähnt. Der Zauberwürfel ist übrigens der Aqara Cube. Den kann man in allen Ebenen verwenden. In alle Richtungen kippen, drehen, schütteln usw.

Danke Dir vielmals.

Viele Grüße - Wolfgang

@haus-automatisierung

Perfekt! Vielen Dank dafür.
Tolle Arbeit!

@jb_sullivan

Servus, die würde ich gerne nehmen.
PP Friends ok?

Viele Grüße - Wolfgang

@thomas-braun

Bester!

Man lernt nie aus.
Vielen Dank.

@fa-bio

Danke für Deine rasche Antwort.

Wie Du siehst, bin ich auf “beta”, nur leider zeigt es mir kein
Update an…

@haus-automatisierung

Da schließe ich mich gerne an, vielen Dank.

Eine Frage habe ich aber tatsächlich noch: Im iobroker Admin sehe ich noch kein Update, was ich auf “Freigabe in Progress” schieben würde.

Habe ich da recht, oder muss ich da bei mir nachsehen?

@haus-automatisierung

Perfekt! Vielen Dank dafür.
Tolle Arbeit!

@haus-automatisierung

Hallo Mathias,

bzgl. des Problems mit den Dezimalstellen, konntest Du hier schon
in die Analyse gehen?
Die Lösung hat keine Eile, wollte nur mal kurz nach nem Status fragen, da
das Thema immer weiter nach oben gespült wird und Du ja noch in so vielen
anderen Themen drin bist.

Danke für Deine Unterstützung.

@haus-automatisierung

Sorry, hab den Beitrag bearbeitet.

@haus-automatisierung

Sorry, mein Fehler.

Wegfall Dezimalstellen für die Apps

temperatur
pvanlage
feuchtaussen

awtrix-light.0
2023-08-25 08:44:46.093	info	Loglevel changed from "debug" to "info"

awtrix-light.0
2023-08-25 08:43:52.400	debug	received 200 response from "/api/notify" with content: "OK"

awtrix-light.0
2023-08-25 08:43:52.369	debug	sending "POST" request to "/api/notify" with data: {"duration":2,"draw":[{"dc":[16,4,3,"#164477"],"dl":[16,3,16,8,"#3399cc"],"dp":[16,1,"#3399cc"]}]}

awtrix-light.0
2023-08-25 08:43:52.369	debug	received 200 response from "/api/moodlight" with content: "OK"

awtrix-light.0
2023-08-25 08:43:52.349	debug	sending "POST" request to "/api/moodlight" without data

awtrix-light.0
2023-08-25 08:43:52.292	debug	Updating moodlight

awtrix-light.0
2023-08-25 08:43:52.291	debug	received 200 response from "/api/indicator3" with content: "OK"

awtrix-light.0
2023-08-25 08:43:52.269	debug	sending "POST" request to "/api/indicator3" without data

awtrix-light.0
2023-08-25 08:43:52.214	debug	Updating indicator with index 3

awtrix-light.0
2023-08-25 08:43:52.214	debug	received 200 response from "/api/indicator2" with content: "OK"

awtrix-light.0
2023-08-25 08:43:52.193	debug	sending "POST" request to "/api/indicator2" without data

awtrix-light.0
2023-08-25 08:43:52.136	debug	Updating indicator with index 2

awtrix-light.0
2023-08-25 08:43:52.135	debug	received 200 response from "/api/indicator1" with content: "OK"

awtrix-light.0
2023-08-25 08:43:52.114	debug	sending "POST" request to "/api/indicator1" without data

awtrix-light.0
2023-08-25 08:43:52.100	debug	Updating indicator with index 1

awtrix-light.0
2023-08-25 08:43:52.099	debug	received 200 response from "/api/custom?name=feuchtaussen" with content: "OK"

awtrix-light.0
2023-08-25 08:43:52.075	debug	sending "POST" request to "/api/custom?name=feuchtaussen" with data: {"text":"88,82 %","textCase":2,"background":"#000000","color":"#FFFFFF","noScroll":true,"icon":"53662","duration":"5"}

awtrix-light.0
2023-08-25 08:43:52.074	debug	[refreshCustomApps] formatted value of objId "deconz.0.Sensors.18.humidity" from 88.82 to 88,82 (0 decimals) with "system"

awtrix-light.0
2023-08-25 08:43:52.072	debug	[refreshCustomApps] Refreshing custom app "feuchtaussen" with icon "53662" and text "%s %u"

awtrix-light.0
2023-08-25 08:43:52.071	debug	[refreshCustomApps] Refreshing custom apps for objId "deconz.0.Sensors.18.humidity" with data {"val":88.82,"type":"number","unit":"%","ts":1692944649629}

awtrix-light.0
2023-08-25 08:43:52.071	debug	received 200 response from "/api/custom?name=pvanlage" with content: "OK"

awtrix-light.0
2023-08-25 08:43:52.044	debug	sending "POST" request to "/api/custom?name=pvanlage" with data: {"text":"24,71 W","textCase":2,"background":"#000000","color":"#ffffff","noScroll":true,"icon":"37515","duration":"5"}

awtrix-light.0
2023-08-25 08:43:52.043	debug	[refreshCustomApps] formatted value of objId "fritzdect.0.DECT_116570586225.power" from 24.71 to 24,71 (0 decimals) with "system"

awtrix-light.0
2023-08-25 08:43:52.039	debug	[refreshCustomApps] Refreshing custom app "pvanlage" with icon "37515" and text "%s %u"

awtrix-light.0
2023-08-25 08:43:52.039	debug	[refreshCustomApps] Refreshing custom apps for objId "fritzdect.0.DECT_116570586225.power" with data {"val":24.71,"type":"number","unit":"W","ts":1692945723402}

awtrix-light.0
2023-08-25 08:43:52.039	debug	received 200 response from "/api/custom?name=temperatur" with content: "OK"

awtrix-light.0
2023-08-25 08:43:51.853	debug	sending "POST" request to "/api/custom?name=temperatur" with data: {"text":"20 °C","textCase":2,"background":"#000000","color":"#FFFFFF","noScroll":true,"icon":"11865","duration":"5"}

awtrix-light.0
2023-08-25 08:43:51.807	debug	[refreshCustomApps] Refreshing custom app "temperatur" with icon "11865" and text "%s %u"

awtrix-light.0
2023-08-25 08:43:51.807	debug	[refreshCustomApps] Refreshing custom apps for objId "fritzdect.0.DECT_116570586225.celsius" with data {"val":20,"type":"number","unit":"°C","ts":1692945723402}

awtrix-light.0
2023-08-25 08:43:51.806	debug	[initCustomApps] Found custom app "feuchtaussen" with objId "deconz.0.Sensors.18.humidity" - subscribed to changes

awtrix-light.0
2023-08-25 08:43:51.804	debug	[initCustomApps] Found custom app "pvanlage" with objId "fritzdect.0.DECT_116570586225.power" - subscribed to changes

awtrix-light.0
2023-08-25 08:43:51.797	debug	[initCustomApps] Found custom app "temperatur" with objId "fritzdect.0.DECT_116570586225.celsius" - subscribed to changes

awtrix-light.0
2023-08-25 08:43:51.783	debug	[createAppObjects] found (keep): apps.feuchtaussen

awtrix-light.0
2023-08-25 08:43:51.779	debug	[createAppObjects] found (keep): apps.pvanlage

awtrix-light.0
2023-08-25 08:43:51.775	debug	[createAppObjects] found (keep): apps.temperatur

awtrix-light.0
2023-08-25 08:43:51.772	debug	[createAppObjects] found (keep): apps.bat

awtrix-light.0
2023-08-25 08:43:51.767	debug	[createAppObjects] found (keep): apps.hum

awtrix-light.0
2023-08-25 08:43:51.763	debug	[createAppObjects] found (keep): apps.temp

awtrix-light.0
2023-08-25 08:43:51.758	debug	[createAppObjects] found (keep): apps.date

awtrix-light.0
2023-08-25 08:43:51.753	debug	[createAppObjects] found (keep): apps.time

awtrix-light.0
2023-08-25 08:43:51.734	debug	[createAppObjects] existing apps on awtrix light: ["time","hum"]

awtrix-light.0
2023-08-25 08:43:51.733	debug	received 200 response from "/api/apps" with content: [{"name":"time"},{"name":"hum"}]

awtrix-light.0
2023-08-25 08:43:51.705	debug	sending "GET" request to "/api/apps" without data

awtrix-light.0
2023-08-25 08:43:51.703	debug	[refreshSettings] updating settings value "awtrix-light.0.settings.textScrollSpeed" to 80

awtrix-light.0
2023-08-25 08:43:51.701	debug	[refreshSettings] updating settings value "awtrix-light.0.settings.appColorBattery" to #000000 (converted from 0)

awtrix-light.0
2023-08-25 08:43:51.700	debug	[refreshSettings] updating settings value "awtrix-light.0.settings.appColorTemperature" to #000000 (converted from 0)

awtrix-light.0
2023-08-25 08:43:51.698	debug	[refreshSettings] updating settings value "awtrix-light.0.settings.appColorHumidity" to #000000 (converted from 0)

awtrix-light.0
2023-08-25 08:43:51.697	debug	[refreshSettings] updating settings value "awtrix-light.0.settings.appColorDate" to #000000 (converted from 0)

awtrix-light.0
2023-08-25 08:43:51.696	debug	[refreshSettings] updating settings value "awtrix-light.0.settings.appColorTime" to #000000 (converted from 0)

awtrix-light.0
2023-08-25 08:43:51.694	debug	[refreshSettings] updating settings value "awtrix-light.0.settings.weekdayColorInactive" to #6B6D6B (converted from 27501)

awtrix-light.0
2023-08-25 08:43:51.693	debug	[refreshSettings] updating settings value "awtrix-light.0.settings.weekdayColorActive" to #FFFFFF (converted from 65535)

awtrix-light.0
2023-08-25 08:43:51.691	debug	[refreshSettings] updating settings value "awtrix-light.0.settings.displayWeekday" to true

awtrix-light.0
2023-08-25 08:43:51.690	debug	[refreshSettings] updating settings value "awtrix-light.0.settings.textUppercase" to true

awtrix-light.0
2023-08-25 08:43:51.688	debug	[refreshSettings] updating settings value "awtrix-light.0.settings.blockButtons" to false

awtrix-light.0
2023-08-25 08:43:51.687	debug	[refreshSettings] updating settings value "awtrix-light.0.settings.weekStartMonday" to true

awtrix-light.0
2023-08-25 08:43:51.685	debug	[refreshSettings] updating settings value "awtrix-light.0.settings.formatDate" to %d.%m.%y

awtrix-light.0
2023-08-25 08:43:51.684	debug	[refreshSettings] updating settings value "awtrix-light.0.settings.formatTime" to %H:%M

awtrix-light.0
2023-08-25 08:43:51.683	debug	[refreshSettings] updating settings value "awtrix-light.0.settings.timeStyle" to 1

awtrix-light.0
2023-08-25 08:43:51.681	debug	[refreshSettings] updating settings value "awtrix-light.0.settings.appDisplayTime" to 5

awtrix-light.0
2023-08-25 08:43:51.680	debug	[refreshSettings] updating settings value "awtrix-light.0.settings.transitionSpeed" to 400

awtrix-light.0
2023-08-25 08:43:51.679	debug	[refreshSettings] updating settings value "awtrix-light.0.settings.appTransitionEffect" to 6

awtrix-light.0
2023-08-25 08:43:51.677	debug	[refreshSettings] updating settings value "awtrix-light.0.settings.textColor" to #FFFFFF (converted from 65535)

awtrix-light.0
2023-08-25 08:43:51.676	debug	[refreshSettings] updating settings value "awtrix-light.0.settings.appSwitchAuto" to true

awtrix-light.0
2023-08-25 08:43:51.672	debug	[refreshSettings] updating settings value "awtrix-light.0.settings.brightness" to 34

awtrix-light.0
2023-08-25 08:43:51.670	debug	[refreshSettings] updating settings value "awtrix-light.0.settings.brightnessAuto" to true

awtrix-light.0
2023-08-25 08:43:51.656	debug	received 200 response from "/api/settings" with content: {"MATP":true,"ABRI":true,"BRI":34,"ATRANS":true,"TCOL":65535,"TEFF":6,"TSPEED":400,"ATIME":5,"TMODE":1,"CCOL":63488,"CTCOL":0,"TFORMAT":"%H:%M","DFORMAT":"%d.%m.%y","SOM":true,"CEL":true,"BLOCKN":false,"MAT":0,"SOUND":true,"GAMMA":1.899999976,"UPPERCASE":true,"CCORRECTION":"#000000","CTEMP":"#000000","WD":true,"WDCA":65535,"WDCI":27501,"TIME_COL":0,"DATE_COL":0,"HUM_COL":0,"TEMP_COL":0,"BAT_COL":0,"SSPEED":80,"TIM":true,"DAT":false,"HUM":true,"TEMP":false,"BAT":false}

awtrix-light.0
2023-08-25 08:43:51.634	debug	sending "GET" request to "/api/settings" without data

awtrix-light.0
2023-08-25 08:43:51.633	debug	API is online

Dezimalstellen in Apps
FW 0.81, Adapter 0.7.1

Trotz "0" Dezimalstellen in Benutzerdef. App
(Wert aus Temperatursensor mit Schema xx.xx Grad)

werden in der Ulanzi beide Dezimalstellen angezeigt.

Neustart, löschen des Adapter usw. alle ohne Erfolg.
Jemand eine Idee?
@haus-automatisierung Evtl. Bug in der aktuellen Version?

Danke schon mal für Input

@Homoran @paul53

Profis!