Hallo,
Nutze den Adapter (0.4.3) jetzt schon einige Wochen und muss sagen. Top
gibt es eine Möglichkeit (bzw. könnte man vielleicht in Zukunft einfügen), dass per Datenpunkt alle Rollos nach oben fahren (ggf. auch mit dem eingestellten Versatz)?
Bsp. wenn Rauchmelder auslöst o.ä.
Das würde diverse Skripte ein wenig vereinfachen.
@thomas-braun
An die hab ich schon gar nicht mehr gedacht. Wohl vergessen das wieder zurück zu stellen, nach dem debuggen.
@Glasfaser
Hab den mal deaktiviert
und das nodejs mit steht jetzt beides wieder auf "nodesource1"
Container anschließend neu gestartet.
Bei top zeigt er noch einen ähnlichen freien RAM an. Ich beobachte erst einmal weiter
Danke schonmal
@glasfaser
Der Container wurde Anfang der Woche einmal neu erstellt (Portainer > recreate) eben wegen dieses Problems.
Natürlich ändern sich die Adapter immer mal wieder. Genauso wie auch immer Skripte dazu kommen.
======== Start marking the full check here =========
Skript v.2023-10-10
*** BASE SYSTEM ***
Hardware Vendor : Synology
Kernel : x86_64
Userland : amd64
Docker : v9.0.1
Virtualization : Docker
Kernel : x86_64
Userland : amd64
Systemuptime and Load:
20:10:32 up 14 days, 23:04, 0 user, load average: 3.26, 3.56, 3.77
CPU threads: 2
*** Time and Time Zones ***
Sat Jan 6 19:10:32 UTC 2024
Sat Jan 6 20:10:32 CET 2024
CET +0100
Etc/UTC
*** User and Groups ***
root
/root
root
*** X-Server-Setup ***
X-Server: false
Desktop:
Terminal:
*** MEMORY ***
total used free shared buff/cache available
Mem: 6.1G 4.9G 530M 101M 956M 1.1G
Swap: 5.8G 1.7G 4.1G
Total: 11G 6.7G 4.6G
5786 M total memory
4718 M used memory
2714 M active memory
1519 M inactive memory
504 M free memory
26 M buffer memory
885 M swap cache
5519 M total swap
1626 M used swap
3893 M free swap
*** FILESYSTEM ***
Filesystem Type Size Used Avail Use% Mounted on
/dev/vg1000/lv btrfs 2.7T 1.1T 1.6T 40% /
tmpfs tmpfs 64M 0 64M 0% /dev
tmpfs tmpfs 2.9G 0 2.9G 0% /sys/fs/cgroup
shm tmpfs 64M 0 64M 0% /dev/shm
/dev/vg1000/lv btrfs 2.7T 1.1T 1.6T 40% /opt/iobroker
/dev/vg1000/lv btrfs 2.7T 1.1T 1.6T 40% /etc/hosts
tmpfs tmpfs 2.9G 0 2.9G 0% /proc/acpi
tmpfs tmpfs 2.9G 0 2.9G 0% /proc/scsi
tmpfs tmpfs 2.9G 0 2.9G 0% /sys/firmware
Messages concerning ext4 filesystem in dmesg:
sudo: unable to resolve host ioBroker2: Name or service not known
Show mounted filesystems \(real ones only\):
TARGET SOURCE FSTYPE OPTIONS
/ /dev/vg1000/lv[/@syno/@docker/btrfs/subvolumes/9635c5d33972d5a1d0cdf513b4218f06d80d6c0ec7ac17c214f091116b61142c] btrfs rw,nodev,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50,syno_allocator,subvolid=2859,subvol=/@syno/@docker/btrfs/subvolumes/9635c5d33972d5a1d0cdf513b4218f06d80d6c0ec7ac17c214f091116b61142c
|-/opt/iobroker /dev/vg1000/lv[/@syno/docker/ioBroker] btrfs rw,nodev,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50,syno_allocator,subvolid=259,subvol=/@syno/docker/ioBroker
| `-/opt/iobroker/cam /dev/vg1000/lv[/@syno/docker/ioBroker_austausch] btrfs rw,nodev,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50,syno_allocator,subvolid=259,subvol=/@syno/docker/ioBroker_austausch
|-/etc/resolv.conf /dev/vg1000/lv[/@syno/@docker/containers/3645daa745bb0632bdf6efc0e7eb2146e93c59610aa507824a70c4a337d7d60b/resolv.conf] btrfs rw,nodev,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50,syno_allocator,subvolid=257,subvol=/@syno/@docker/containers/3645daa745bb0632bdf6efc0e7eb2146e93c59610aa507824a70c4a337d7d60b/resolv.conf
|-/etc/hostname /dev/vg1000/lv[/@syno/@docker/containers/3645daa745bb0632bdf6efc0e7eb2146e93c59610aa507824a70c4a337d7d60b/hostname] btrfs rw,nodev,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50,syno_allocator,subvolid=257,subvol=/@syno/@docker/containers/3645daa745bb0632bdf6efc0e7eb2146e93c59610aa507824a70c4a337d7d60b/hostname
`-/etc/hosts /dev/vg1000/lv[/@syno/@docker/containers/3645daa745bb0632bdf6efc0e7eb2146e93c59610aa507824a70c4a337d7d60b/hosts] btrfs rw,nodev,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50,syno_allocator,subvolid=257,subvol=/@syno/@docker/containers/3645daa745bb0632bdf6efc0e7eb2146e93c59610aa507824a70c4a337d7d60b/hosts
Files in neuralgic directories:
/var:
sudo: unable to resolve host ioBroker2: Name or service not known
34M /var/
32M /var/lib
19M /var/lib/apt/lists
19M /var/lib/apt
13M /var/lib/dpkg
/opt/iobroker/backups:
5.4G /opt/iobroker/backups/
/opt/iobroker/iobroker-data:
1.4G /opt/iobroker/iobroker-data/
671M /opt/iobroker/iobroker-data/history
364M /opt/iobroker/iobroker-data/files
239M /opt/iobroker/iobroker-data/backup-objects
67M /opt/iobroker/iobroker-data/files/javascript.admin
The five largest files in iobroker-data are:
35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map
21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map
19M /opt/iobroker/iobroker-data/objects.jsonl
18M /opt/iobroker/iobroker-data/states.jsonl
USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':
find: '/dev/serial/by-id/': No such file or directory
*** NodeJS-Installation ***
/usr/bin/nodejs v18.19.0
/usr/bin/node v18.19.0
/usr/bin/npm 10.2.3
/usr/bin/npx 10.2.3
/usr/bin/corepack 0.22.0
nodejs:
Installed: 18.19.0-1nodesource1
Candidate: 18.19.0+dfsg-6~deb12u1
Version table:
18.19.0+dfsg-6~deb12u1 500
500 http://deb.debian.org/debian-security bookworm-security/main amd64 Packages
*** 18.19.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
100 /var/lib/dpkg/status
18.18.2-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.18.1-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.18.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.17.1-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.17.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.16.1-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.16.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.15.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.14.2-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.14.1-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.14.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.13.0+dfsg1-1 500
500 http://deb.debian.org/debian bookworm/main amd64 Packages
18.13.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.12.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.11.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.10.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.9.1-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.9.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.8.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.7.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.6.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.5.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.4.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.3.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.2.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.1.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.0.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
Temp directories causing npm8 problem: 0
No problems detected
Errors in npm tree:
*** ioBroker-Installation ***
ioBroker Status
iobroker is running on this host.
Objects type: jsonl
States type: jsonl
Core adapters versions
js-controller: 5.0.17
admin: 6.12.0
javascript: 7.1.6
Adapters from github: 4
Adapter State
+ system.adapter.admin.0 : admin : ioBroker2 - enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0 : alexa2 : ioBroker2 - enabled
+ system.adapter.backitup.0 : backitup : ioBroker2 - enabled
system.adapter.blockly-plus.0 : blockly-plus : ioBroker2 - disabled
system.adapter.chromecast.0 : chromecast : ioBroker2 - disabled
+ system.adapter.device-reminder.0 : device-reminder : ioBroker2 - enabled
+ system.adapter.device-watcher.0 : device-watcher : ioBroker2 - enabled
system.adapter.devices.0 : devices : ioBroker2 - disabled
system.adapter.discovery.0 : discovery : ioBroker2 - disabled
+ system.adapter.divera247.0 : divera247 : ioBroker2 - enabled
+ system.adapter.divera247.1 : divera247 : ioBroker2 - enabled
system.adapter.dwd.0 : dwd : ioBroker2 - disabled
system.adapter.ebus.0 : ebus : ioBroker2 - disabled
system.adapter.feiertage.0 : feiertage : ioBroker2 - enabled
system.adapter.flot.0 : flot : ioBroker2 - disabled
+ system.adapter.history.0 : history : ioBroker2 - enabled
+ system.adapter.hm-rega.0 : hm-rega : ioBroker2 - enabled
+ system.adapter.hm-rpc.0 : hm-rpc : ioBroker2 - enabled, port: 18701
+ system.adapter.hm-rpc.1 : hm-rpc : ioBroker2 - enabled, port: 12001
+ system.adapter.hm-rpc.2 : hm-rpc : ioBroker2 - enabled, port: 0
system.adapter.ical.0 : ical : ioBroker2 - enabled
system.adapter.info.0 : info : ioBroker2 - disabled
system.adapter.iot.0 : iot : ioBroker2 - disabled
+ system.adapter.jarvis.0 : jarvis : ioBroker2 - enabled
+ system.adapter.jarvis.1 : jarvis : ioBroker2 - enabled
+ system.adapter.javascript.0 : javascript : ioBroker2 - enabled
+ system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBroker2 - enabled, port: 54321
system.adapter.milight.0 : milight : ioBroker2 - disabled, port: 5987
+ system.adapter.mqtt.0 : mqtt : ioBroker2 - enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.net-tools.0 : net-tools : ioBroker2 - enabled
system.adapter.octoprint.0 : octoprint : ioBroker2 - disabled
system.adapter.oilfox.0 : oilfox : ioBroker2 - disabled
system.adapter.parser.0 : parser : ioBroker2 - disabled
+ system.adapter.philips-tv.1 : philips-tv : ioBroker2 - enabled
system.adapter.ping.0 : ping : ioBroker2 - disabled
system.adapter.proxy.0 : proxy : ioBroker2 - disabled
+ system.adapter.pushover.0 : pushover : ioBroker2 - enabled
system.adapter.rtspStream.0 : rtspStream : ioBroker2 - disabled, port: 8083
+ system.adapter.sainlogic.0 : sainlogic : ioBroker2 - enabled, port: 45000, bind: 0.0.0.0
+ system.adapter.sayit.0 : sayit : ioBroker2 - enabled
system.adapter.scenes.0 : scenes : ioBroker2 - disabled
+ system.adapter.shelly.0 : shelly : ioBroker2 - enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shelly.1 : shelly : ioBroker2 - enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shuttercontrol.2 : shuttercontrol : ioBroker2 - enabled
system.adapter.simple-api.0 : simple-api : ioBroker2 - disabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.socketio.0 : socketio : ioBroker2 - enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.sourceanalytix.0 : sourceanalytix : ioBroker2 - enabled
+ system.adapter.spotify-premium.0 : spotify-premium : ioBroker2 - enabled
+ system.adapter.spotify-premium.1 : spotify-premium : ioBroker2 - enabled
system.adapter.sql.0 : sql : ioBroker2 - disabled, port: 3307
+ system.adapter.synology.0 : synology : ioBroker2 - enabled, port: 5001
+ system.adapter.tankerkoenig.0 : tankerkoenig : ioBroker2 - enabled
+ system.adapter.telegram.0 : telegram : ioBroker2 - enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.tr-064.0 : tr-064 : ioBroker2 - enabled
+ system.adapter.tr-064.1 : tr-064 : ioBroker2 - enabled
system.adapter.unifi.0 : unifi : ioBroker2 - disabled
system.adapter.upnp.0 : upnp : ioBroker2 - disabled
system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : ioBroker2 - disabled
system.adapter.vis-materialdesign.0 : vis-materialdesign : ioBroker2 - disabled
system.adapter.vis.0 : vis : ioBroker2 - disabled
system.adapter.wallpanel.0 : wallpanel : ioBroker2 - disabled
system.adapter.weatherflow_udp.0 : weatherflow_udp : ioBroker2 - disabled
system.adapter.weatherunderground.0 : weatherunderground : ioBroker2 - disabled
+ system.adapter.web.0 : web : ioBroker2 - enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.wled.0 : wled : ioBroker2 - enabled
+ system.adapter.zigbee.0 : zigbee : ioBroker2 - enabled, port: tcp://192.168.10.211:20108
+ instance is alive
Enabled adapters with bindings
+ system.adapter.admin.0 : admin : ioBroker2 - enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hm-rpc.0 : hm-rpc : ioBroker2 - enabled, port: 18701
+ system.adapter.hm-rpc.1 : hm-rpc : ioBroker2 - enabled, port: 12001
+ system.adapter.hm-rpc.2 : hm-rpc : ioBroker2 - enabled, port: 0
+ system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBroker2 - enabled, port: 54321
+ system.adapter.mqtt.0 : mqtt : ioBroker2 - enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.sainlogic.0 : sainlogic : ioBroker2 - enabled, port: 45000, bind: 0.0.0.0
+ system.adapter.shelly.0 : shelly : ioBroker2 - enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shelly.1 : shelly : ioBroker2 - enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.socketio.0 : socketio : ioBroker2 - enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.synology.0 : synology : ioBroker2 - enabled, port: 5001
+ system.adapter.telegram.0 : telegram : ioBroker2 - enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0 : web : ioBroker2 - enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0 : zigbee : ioBroker2 - enabled, port: tcp://192.168.10.211:20108
ioBroker-Repositories
stable : http://download.iobroker.net/sources-dist.json
beta : http://download.iobroker.net/sources-dist-latest.json
Active repo(s): stable
Installed ioBroker-Instances
Used repository: stable
Adapter "admin" : 6.12.0 , installed 6.12.0
Adapter "alexa2" : 3.26.3 , installed 3.26.3
Adapter "backitup" : 2.9.8 , installed 2.9.8
Adapter "chromecast" : 3.0.3 , installed 3.0.3
Adapter "daswetter" : 3.1.11 , installed 3.1.11
Adapter "device-reminder": 3.0.0 , installed 3.0.0
Adapter "device-watcher": 2.9.6 , installed 2.9.6
Adapter "devices" : 1.1.5 , installed 1.1.5
Adapter "discovery" : 4.2.0 , installed 4.2.0
Adapter "divera247" : 0.2.0 , installed 0.1.2 [Updatable]
Adapter "dwd" : 2.8.5 , installed 2.8.5
Adapter "ebus" : 3.2.4 , installed 3.2.4
Adapter "feiertage" : 1.1.4 , installed 1.1.4
Adapter "flot" : 1.12.0 , installed 1.12.0
Adapter "history" : 3.0.1 , installed 3.0.1
Adapter "hm-rega" : 4.0.0 , installed 4.0.0
Adapter "hm-rpc" : 1.15.19 , installed 1.15.19
Adapter "ical" : 1.13.3 , installed 1.13.3
Adapter "info" : 2.0.0 , installed 2.0.0
Adapter "iot" : 2.0.11 , installed 2.0.11
Adapter "jarvis" : 3.1.8 , installed 3.1.8
Adapter "javascript" : 7.1.6 , installed 7.1.6
Controller "js-controller": 5.0.17 , installed 5.0.17
Adapter "mihome-vacuum": 4.1.0 , installed 4.1.0
Adapter "milight" : 0.4.0 , installed 0.4.0
Adapter "mqtt" : 5.1.0 , installed 5.1.0
Adapter "net-tools" : 0.2.0 , installed 0.2.0
Adapter "octoprint" : 5.1.0 , installed 5.1.0
Adapter "oilfox" : 4.2.0 , installed 4.2.0
Adapter "parser" : 2.0.7 , installed 2.0.7
Adapter "philips-tv" : 0.5.3 , installed 0.5.3
Adapter "ping" : 1.6.2 , installed 1.6.2
Adapter "proxy" : 1.3.2 , installed 1.3.2
Adapter "pushover" : 3.0.6 , installed 3.0.6
Adapter "sainlogic" : 0.10.5 , installed 0.10.5
Adapter "sayit" : 3.0.5 , installed 3.0.5
Adapter "scenes" : 2.3.9 , installed 2.3.9
Adapter "shelly" : 6.6.1 , installed 6.6.1
Adapter "shuttercontrol": 1.6.3 , installed 1.6.3
Adapter "simple-api" : 2.7.2 , installed 2.7.2
Adapter "snmp" : 3.1.0 , installed 3.1.0
Adapter "socketio" : 6.6.0 , installed 6.6.0
Adapter "spotify-premium": 1.3.1 , installed 1.3.1
Adapter "sql" : 2.2.0 , installed 2.2.0
Adapter "synology" : 3.0.1 , installed 3.0.1
Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7
Adapter "telegram" : 3.0.1 , installed 1.16.0 [Updatable]
Adapter "tr-064" : 4.2.18 , installed 4.2.18
Adapter "unifi" : 0.6.7 , installed 0.6.7
Adapter "upnp" : 1.0.21 , installed 1.0.21
Adapter "vis" : 1.5.4 , installed 1.4.16 [Updatable]
Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12
Adapter "vis-materialdesign": 0.5.9, installed 0.5.9
Adapter "wallpanel" : 0.3.11 , installed 0.3.11
Adapter "weatherflow_udp": 0.1.3 , installed 0.1.3
Adapter "weatherunderground": 3.6.0, installed 3.6.0
Adapter "web" : 6.1.10 , installed 6.1.10
Adapter "wled" : 0.7.2 , installed 0.7.2
Adapter "ws" : 2.5.8 , installed 2.5.8
Adapter "zigbee" : 1.9.5 , installed 1.8.25 [Updatable]
Objects and States
Please stand by - This may take a while
Objects: 14712
States: 17399
*** OS-Repositories and Updates ***
sudo: unable to resolve host ioBroker2: Name or service not known
sudo: unable to resolve host ioBroker2: Name or service not known
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian bookworm-updates InRelease
Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 0
*** Listening Ports ***
sudo: unable to resolve host ioBroker2: Name or service not known
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 23266 -
tcp 0 0 127.0.0.1:5432 0.0.0.0:* LISTEN 55 65270 -
tcp 0 0 0.0.0.0:8889 0.0.0.0:* LISTEN 0 80711 -
tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1000 182189525 -
tcp 0 0 192.168.10.200:2010 0.0.0.0:* LISTEN 1000 182187431 -
tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1000 182358206 -
tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 0 37705 -
tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 38933 -
tcp 0 0 127.0.0.1:512 0.0.0.0:* LISTEN 0 94890 -
tcp 0 0 0.0.0.0:8000 0.0.0.0:* LISTEN 0 80726 -
tcp 0 0 192.168.10.200:12001 0.0.0.0:* LISTEN 1000 182181721 -
tcp 0 0 0.0.0.0:49153 0.0.0.0:* LISTEN 0 84613 -
tcp 0 0 0.0.0.0:44321 0.0.0.0:* LISTEN 0 37707 -
tcp 0 0 0.0.0.0:161 0.0.0.0:* LISTEN 0 37396 -
tcp 0 0 0.0.0.0:35554 0.0.0.0:* LISTEN 0 80270 -
tcp 0 0 0.0.0.0:9443 0.0.0.0:* LISTEN 0 80621 -
tcp 0 0 0.0.0.0:35556 0.0.0.0:* LISTEN 0 80245 -
tcp 0 0 0.0.0.0:3493 0.0.0.0:* LISTEN 0 29281 -
tcp 0 0 0.0.0.0:45000 0.0.0.0:* LISTEN 1000 182363257 -
tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1000 182181299 -
tcp 0 0 0.0.0.0:5000 0.0.0.0:* LISTEN 0 37699 -
tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1000 182181289 -
tcp 0 0 0.0.0.0:5001 0.0.0.0:* LISTEN 0 37701 -
tcp 0 0 0.0.0.0:8010 0.0.0.0:* LISTEN 0 182302531 -
tcp 0 0 0.0.0.0:554 0.0.0.0:* LISTEN 0 73839 -
tcp 0 0 0.0.0.0:3307 0.0.0.0:* LISTEN 66 66580 -
tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 38934 -
tcp 0 0 192.168.10.200:18701 0.0.0.0:* LISTEN 1000 182181596 -
tcp 0 0 0.0.0.0:5357 0.0.0.0:* LISTEN 0 40717 -
tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1000 182346128 -
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 0 37703 -
tcp 0 0 0.0.0.0:8401 0.0.0.0:* LISTEN 1000 182344158 -
tcp 0 0 0.0.0.0:5555 0.0.0.0:* LISTEN 0 84574 -
tcp 0 0 127.0.0.1:915 0.0.0.0:* LISTEN 0 68487 -
tcp6 0 0 :::22 :::* LISTEN 0 23273 -
tcp6 0 0 :::443 :::* LISTEN 0 37706 -
tcp6 0 0 :::3261 :::* LISTEN 0 41911 -
tcp6 0 0 :::445 :::* LISTEN 0 38931 -
tcp6 0 0 :::3263 :::* LISTEN 0 41909 -
tcp6 0 0 :::3264 :::* LISTEN 0 41912 -
tcp6 0 0 :::3265 :::* LISTEN 0 43166 -
tcp6 0 0 :::44321 :::* LISTEN 0 37708 -
tcp6 0 0 :::161 :::* LISTEN 0 37397 -
tcp6 0 0 :::5000 :::* LISTEN 0 37700 -
tcp6 0 0 :::5001 :::* LISTEN 0 37702 -
tcp6 0 0 :::139 :::* LISTEN 0 38932 -
tcp6 0 0 :::5357 :::* LISTEN 0 40718 -
tcp6 0 0 :::1935 :::* LISTEN 233155 73309 -
tcp6 0 0 :::80 :::* LISTEN 0 37704 -
tcp6 0 0 :::8081 :::* LISTEN 1000 182181441 -
tcp6 0 0 :::8082 :::* LISTEN 1000 182189913 -
tcp6 0 0 :::8084 :::* LISTEN 1000 182362061 -
udp 0 0 0.0.0.0:19996 0.0.0.0:* 233155 73337 -
udp 0 0 0.0.0.0:19997 0.0.0.0:* 233155 73336 -
udp 0 0 0.0.0.0:19998 0.0.0.0:* 233155 73335 -
udp 2944 0 0.0.0.0:3702 0.0.0.0:* 99 33794 -
udp 5888 0 0.0.0.0:68 0.0.0.0:* 0 26393 -
udp 0 0 172.19.0.1:123 0.0.0.0:* 87 87049 -
udp 0 0 172.17.0.1:123 0.0.0.0:* 87 83554 -
udp 0 0 192.168.10.200:123 0.0.0.0:* 87 33205 -
udp 0 0 127.0.0.1:123 0.0.0.0:* 0 23765 -
udp 0 0 0.0.0.0:123 0.0.0.0:* 0 23761 -
udp 0 0 192.168.10.255:137 0.0.0.0:* 0 39132 -
udp 0 0 192.168.10.200:137 0.0.0.0:* 0 39131 -
udp 0 0 0.0.0.0:137 0.0.0.0:* 0 39111 -
udp 0 0 192.168.10.255:138 0.0.0.0:* 0 39134 -
udp 0 0 192.168.10.200:138 0.0.0.0:* 0 39133 -
udp 0 0 0.0.0.0:138 0.0.0.0:* 0 39112 -
udp 0 0 0.0.0.0:161 0.0.0.0:* 0 37394 -
udp 0 0 0.0.0.0:53421 0.0.0.0:* 1000 182346877 -
udp 896 0 0.0.0.0:5353 0.0.0.0:* 1000 182370487 -
udp 0 0 172.17.0.1:5353 0.0.0.0:* 1000 182368990 -
udp 0 0 172.19.0.1:5353 0.0.0.0:* 1000 182368989 -
udp 0 0 192.168.10.200:5353 0.0.0.0:* 1000 182368988 -
udp 896 0 0.0.0.0:5353 0.0.0.0:* 0 40103 -
udp 0 0 0.0.0.0:34196 0.0.0.0:* 0 40105 -
udp 0 0 0.0.0.0:5683 0.0.0.0:* 1000 182188074 -
udp 0 0 0.0.0.0:38624 0.0.0.0:* 233155 75667 -
udp 0 0 0.0.0.0:38625 0.0.0.0:* 233155 75668 -
udp 0 0 0.0.0.0:9997 0.0.0.0:* 0 23600 -
udp 0 0 0.0.0.0:9998 0.0.0.0:* 0 23599 -
udp 0 0 0.0.0.0:9999 0.0.0.0:* 0 23598 -
udp 0 0 0.0.0.0:1900 0.0.0.0:* 0 40226 -
udp6 0 0 :::3702 :::* 99 33796 -
udp6 0 0 fe80::185e:c8ff:fef:123 :::* 87 182303665 -
udp6 0 0 fe80::b019:eeff:fea:123 :::* 87 95772 -
udp6 0 0 fe80::b83b:d8ff:fe8:123 :::* 87 94373 -
udp6 0 0 fe80::e0ef:bff:fec9:123 :::* 87 92770 -
udp6 0 0 fe80::4cb9:87ff:fe2:123 :::* 87 90326 -
udp6 0 0 fe80::b4f8:3ff:fee5:123 :::* 87 87949 -
udp6 0 0 fe80::42:c6ff:fe10::123 :::* 87 87260 -
udp6 0 0 fe80::ac09:c4ff:fe9:123 :::* 87 86055 -
udp6 0 0 fe80::2440:48ff:fef:123 :::* 87 86053 -
udp6 0 0 fe80::4c2:7dff:fe00:123 :::* 87 83560 -
udp6 0 0 fe80::42:93ff:fe2c::123 :::* 87 83558 -
udp6 0 0 fe80::211:32ff:fe8e:123 :::* 87 29255 -
udp6 0 0 ::1:123 :::* 0 23767 -
udp6 0 0 :::123 :::* 0 23758 -
udp6 0 0 :::161 :::* 0 37395 -
udp6 0 0 :::5353 :::* 0 40104 -
udp6 0 0 :::46767 :::* 0 40106 -
*** Log File - Last 25 Lines ***
2024-01-06 20:18:04.585 - error: shelly.1 (316) [MQTT] Unable to get mqttprefix of client with id "shellyplusi4-90380c380014"
2024-01-06 20:18:08.482 - debug: shelly.1 (316) [httpIoBrokerState] State change 192.168.60.196 (shellyuni / shellyuni-40F520006A51 / SHUNI-1#40F520006A51#1): state: SHUNI-1#40F520006A51#1.uptime, value: 3574563
2024-01-06 20:18:08.482 - debug: shelly.1 (316) [httpIoBrokerState] State change 192.168.60.196 (shellyuni / shellyuni-40F520006A51 / SHUNI-1#40F520006A51#1): state: SHUNI-1#40F520006A51#1.rssi, value: -73
2024-01-06 20:18:11.249 - debug: shelly.1 (316) [MQTT] Publish: 192.168.60.196 (shellyuni / shellyuni-40F520006A51 / SHUNI-1#40F520006A51#1) - topic: shellies/Treppenhaus_BWM_shellyUNI/relay/0, qos: 0, payload: off
2024-01-06 20:18:11.251 - debug: shelly.1 (316) [MQTT] Publish: 192.168.60.196 (shellyuni / shellyuni-40F520006A51 / SHUNI-1#40F520006A51#1) - topic: shellies/Treppenhaus_BWM_shellyUNI/relay/1, qos: 0, payload: off
2024-01-06 20:18:11.252 - debug: shelly.1 (316) [MQTT] Publish: 192.168.60.196 (shellyuni / shellyuni-40F520006A51 / SHUNI-1#40F520006A51#1) - topic: shellies/Treppenhaus_BWM_shellyUNI/input/0, qos: 0, payload: 0
2024-01-06 20:18:11.253 - debug: shelly.1 (316) [MQTT] Publish: 192.168.60.196 (shellyuni / shellyuni-40F520006A51 / SHUNI-1#40F520006A51#1) - topic: shellies/Treppenhaus_BWM_shellyUNI/input/1, qos: 0, payload: 0
2024-01-06 20:18:12.327 - warn: shelly.0 (301) [authEnabled] 192.168.10.215 (shellyplug-s / shellyplug-s-1D416F / SHPLG-S#1D416F#1): This device is not protected via restricted login (see adapter documentation for details)
2024-01-06 20:18:13.954 - debug: zigbee.0 (1738) DeviceAvailability:Non-pingable device 0x00158d0004a04bd9 lumi.sensor_magnet.aq2 was last seen '914.621' seconds ago.
2024-01-06 20:18:13.985 - debug: zigbee.0 (1738) DeviceAvailability:Non-pingable device 0x0017880106475b87 SML002 was last seen '7966913.275' seconds ago.
2024-01-06 20:18:14.020 - debug: zigbee.0 (1738) DeviceAvailability:Non-pingable device 0x00158d0004445305 lumi.weather was last seen '8501590.218' seconds ago.
2024-01-06 20:18:19.803 - warn: mqtt.0 (1439) Client [mywallpanel] has invalid password(Giech96110!) or username(Hichi)
2024-01-06 20:18:20.117 - warn: mqtt.0 (1439) Client [mywallpanel] has invalid password(Giech96110!) or username(Hichi)
2024-01-06 20:18:24.280 - warn: shelly.0 (301) [authEnabled] 192.168.10.215 (shellyplug-s / shellyplug-s-1D416F / SHPLG-S#1D416F#1): This device is not protected via restricted login (see adapter documentation for details)
2024-01-06 20:18:26.701 - debug: shelly.1 (316) [httpIoBrokerState] State change 192.168.60.196 (shellyuni / shellyuni-40F520006A51 / SHUNI-1#40F520006A51#1): state: SHUNI-1#40F520006A51#1.uptime, value: 3574582
2024-01-06 20:18:26.701 - debug: shelly.1 (316) [httpIoBrokerState] State change 192.168.60.196 (shellyuni / shellyuni-40F520006A51 / SHUNI-1#40F520006A51#1): state: SHUNI-1#40F520006A51#1.rssi, value: -71
2024-01-06 20:18:28.369 - debug: shelly.1 (316) [MQTT Server] New connection from 192.168.10.179
2024-01-06 20:18:28.371 - debug: shelly.1 (316) [MQTT] Client connected: {"cmd":"connect","retain":false,"qos":0,"dup":false,"length":107,"topic":null,"payload":null,"protocolId":"MQTT","protocolVersion":4,"will":{"retain":true,"qos":0,"topic":"shellyplusi4-90380c380014/online","payload":{"type":"Buffer","data":[102,97,108,115,101]}},"clean":true,"keepalive":60,"clientId":"shellyplusi4-90380c380014","username":"mqttuser","password":{"type":"Buffer","data":[71,105,101,99,104,57,54,49,49,48,33,115,104,101,108,108,121]}}
2024-01-06 20:18:28.372 - debug: shelly.1 (316) [BaseClient] Destroying 192.168.10.179 (undefined / undefined / undefined)
2024-01-06 20:18:28.372 - debug: shelly.1 (316) [MQTT] Destroying
2024-01-06 20:18:28.372 - info: shelly.1 (316) [MQTT] Device with client id "shellyplusi4-90380c380014" connected!
2024-01-06 20:18:28.913 - debug: shelly.1 (316) [onlineCheck] Checking shellyplusi4#90380c380014#1 on 192.168.10.179:80
2024-01-06 20:18:28.965 - debug: shelly.1 (316) [deviceStatusUpdate] shellyplusi4#90380c380014#1: true
2024-01-06 20:18:29.930 - debug: shelly.1 (316) [onlineCheck] Checking SHUNI-1#40F520006A51#1 on 192.168.60.196:80
2024-01-06 20:18:29.935 - debug: shelly.1 (316) [deviceStatusUpdate] SHUNI-1#40F520006A51#1: true
@haselchen
Es lief hier auch ja ca. 5 Jahre ohne Probleme.
Kann leider nicht sagen, ob es direkt nach einem der letzten Updates begonnen hat.
Verschlanken weiß ich nicht.
Problem besteht auch mit deaktiviertem Javascript Adapter bzw. wenn fast alle Adapter aus sind.
Hallo,
Prinzipiell nutze ich ioBroker schon seit 6 Jahren.
Ich habe seit ein paar Wochen das Problem, dass mein iobroker immer langsamer wird.
Macht sich auch sehr stark bemerkbar, dass Scripte nur sehr verzögert auslösen. zb Licht über Bewegungssmelder geht erst nach 20 Sekunden an. Der Container selbst ist noch nicht soooo alt. Wurde von ca. einem Jahr neu angelegt und Backup eingespielt.
Eine Fehlermeldung habe ich noch nicht angezeigt bekommen, außer dass iobroker in der Adminübersicht manchmal diese "timeout". Meldung bringt.
System läuft auf einer DiskStation 218+ mit 6GB RAM im Docker.
Laut "top" ist nur noch sehr wenig Arbeitsspeicher übrig und ich vermute das Problem hier.
Es laufen relativ viele Adapter (im Normalfall ca 40). Problem besteht aber auch, wenn nur der Admin Adapter läuft und alle anderen aus sind.
Wo könnte ich mit meinen rudimentären Linux Kenntnissen ansetzen?
Gruß,
Markus
Hab auch seit einigen Tagen/Wochen immer wieder das selbe Problem.
Ein neu Einlesen der Playlists hatte anfangs noch geholfen.
Jetzt geht wohl gar nichts mehr.
spotify-premium.1
2023-02-26 07:50:47.169 debug spotify api call... /v1/me/player;
spotify-premium.1
2023-02-26 07:50:47.168 debug call status polling
spotify-premium.1
2023-02-26 07:50:46.258 debug context type: ""
spotify-premium.1
2023-02-26 07:50:46.165 error could not execute command: 404
spotify-premium.1
2023-02-26 07:50:46.129 debug spotify api call... /v1/me/player;
spotify-premium.1
2023-02-26 07:50:46.128 debug call status polling
spotify-premium.1
2023-02-26 07:50:44.494 debug spotify api call... /v1/me/player/play?device_id=;
spotify-premium.1
2023-02-26 07:50:44.494 debug
spotify-premium.1
2023-02-26 07:50:44.493 debug trigger: player.play -> {"val":true,"ack":false,"ts":1672085307948,"q":0,"from":"system.adapter.admin.0","user":"system.user.admin","lc":1672085307948}
Edit
Ist Jezt der Esszimmer, aber Küche ist gleich
@homoran
Hab nun mal ohne die Einstellung ins Log geschaut.
Da steht was von Window open (so einen Sensor gibts aber nicht)
Der Küchenrollo ist aber noch offen.
Werde jetzt dennoch die andere Einstellung testen
2022-07-15 15:10:32.221 - debug: shuttercontrol.2 (11876) last automatic Action for Rollladen Küche: down_Sunprotect
2022-07-15 15:10:32.221 - debug: shuttercontrol.2 (11876) Sunprotect for Rollladen Küche is active
2022-07-15 15:10:32.221 - debug: shuttercontrol.2 (11876) Temperatur outside: 24.5 > 22 AND Light: 8.92 > 5
2022-07-15 15:10:32.221 - debug: shuttercontrol.2 (11876) Sunprotect Rollladen Küche old height: 100% new height: 30%
2022-07-15 15:10:32.312 - debug: shuttercontrol.2 (11876) Shutter state changed: Rollladen Küche old value = 100 new value = 30
2022-07-15 15:10:32.313 - debug: shuttercontrol.2 (11876) Rollladen Küche Old value = 100. New value = 30. automatic is active
2022-07-15 15:10:33.240 - debug: shuttercontrol.2 (11876) save current height after State Check: 100% from Rollladen Küche
2022-07-15 15:10:33.240 - debug: shuttercontrol.2 (11876) Shutter Rollladen Küche was moved manually to: 100% while window was open - prevent trigger from driving back
2022-07-15 15:10:36.339 - debug: shuttercontrol.2 (11876) Lightsensor changed: Datenpunkte.0.Sonnensensor_gemittelt Value: 8.8
2022-07-15 15:10:41.231 - debug: shuttercontrol.2 (11876) Lightsensor changed: Datenpunkte.0.Sonnensensor_gemittelt Value: 8.66
2022-07-15 15:10:42.229 - debug: shuttercontrol.2 (11876) Rollladen Schlafzimmer: Check basis for sunprotect. Height:100 > HeightDownSun: 30 AND Height:100 == currentHeight:100 AND currentHeight:100 == heightUp:100
2022-07-15 15:10:42.229 - info: shuttercontrol.2 (11876) Sunprotect #414 Set ID: Rollladen Schlafzimmer value: 30%
2022-07-15 15:10:42.293 - debug: shuttercontrol.2 (11876) last automatic Action for Rollladen Schlafzimmer: down_Sunprotect
2022-07-15 15:10:42.293 - debug: shuttercontrol.2 (11876) Sunprotect for Rollladen Schlafzimmer is active
2022-07-15 15:10:42.295 - debug: shuttercontrol.2 (11876) Temperatur outside: 24.5 > 22 AND Light: 8.66 > 5
2022-07-15 15:10:42.295 - debug: shuttercontrol.2 (11876) Sunprotect Rollladen Schlafzimmer old height: 100% new height: 30%
2022-07-15 15:10:42.383 - debug: shuttercontrol.2 (11876) Shutter state changed: Rollladen Schlafzimmer old value = 100 new value = 30
2022-07-15 15:10:42.384 - debug: shuttercontrol.2 (11876) Rollladen Schlafzimmer Old value = 100. New value = 30. automatic is active
2022-07-15 15:10:43.340 - debug: shuttercontrol.2 (11876) save current height after State Check: 100% from Rollladen Schlafzimmer
2022-07-15 15:10:43.340 - debug: shuttercontrol.2 (11876) Shutter Rollladen Schlafzimmer was moved manually to: 100% while window was open - prevent trigger from driving back
2022-07-15 15:10:45.130 - debug: shuttercontrol.2 (11876) Shutter state changed: Rollladen Küche old value = 100 new value = 30
2022-07-15 15:10:45.180 - debug: shuttercontrol.2 (11876) Rollladen Küche Updated trigger action to Manu_Mode to prevent moving after window close
2022-07-15 15:10:45.180 - debug: shuttercontrol.2 (11876) Rollladen Küche drived manually to 30. Old value = 100. New value = 30
2022-07-15 15:10:45.266 - info: synology.0 (402) State value to set for "synology.0.DiskStationManager.vol_info.volume_1.used_size" has to be type "number" but received type "string"
2022-07-15 15:10:46.186 - debug: shuttercontrol.2 (11876) save current height after State Check: 30% from Rollladen Küche
2022-07-15 15:10:46.187 - debug: shuttercontrol.2 (11876) Shutter Rollladen Küche was moved manually to: 30% while window was open - prevent trigger from driving back
@homoran
Das teste ich morgen mal. 
Will mal ins Log schauen. Da sollte ja etwas derartiges stehen.
Hab seit 4 Jahren die Homematic Aktoren dafür und letztes Jahr zumindest noch keine Probleme damit gehabt.
@homoran
Sie wechseln dann wohl in den manu_mode. Bin gerade dabei, die Objekte mal zu loggen.
afaik war/ist es mal so, dass wenn die Rollos im Sonnenschutz sind und einmal manuell bewegt werden, dann geht der Sonnenschutz "aus" und erst am nächsten Tag wieder an.
Das kann ich aber eigentlich ausschließen, da Tagsüber gar keiner zu Hause war/ist.
