@migoller hallo
------------ Hat sich erledigt geht jetzt --------------
ich versuche immer zu das Update zu installieren aber irgendwie will das nicht wirklich klappen !
gibt es eine anleitung dazu ?
habe leider nicht sooo die erfahrung !
Dankle Klaus
v0.2.20 läuft seid einigen wochen immer zu auf login fehler
---------- Nachtrag ----------
Mir ist aufgefallen das dieser Eintrag nicht unter 15 Sek. stehen darf !
Abfrageintervall (Sekunden) zum Abrufen von Life360-Daten
@thomas-braun ok das heisst neu machen alles !
Das kann ich aber erst nächstes Wochenende machen bin Fernfahrer darf um 4 Uhr los fahren und bin dann erst Wochenende wieder da !
Bräuchte dann noch mal hilfe wegen backup
Danke dir erst einmal !
Werde den Rechner aus machen geht so oder so nichts in mom!
Habe ja noch einen mini PC hier stehen !
t=0030, bcdDevice= 1.00
[So Dez 4 19:14:58 2022] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[So Dez 4 19:14:58 2022] usb 1-2: Product: ConBee II
[So Dez 4 19:14:58 2022] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[So Dez 4 19:14:58 2022] usb 1-2: SerialNumber: DE2219489
[So Dez 4 19:14:58 2022] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[So Dez 4 19:15:02 2022] usb 1-2: USB disconnect, device number 17
[So Dez 4 19:15:02 2022] usb 1-2: new full-speed USB device number 18 using xhci_hcd
[So Dez 4 19:15:02 2022] usb 1-2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[So Dez 4 19:15:02 2022] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[So Dez 4 19:15:02 2022] usb 1-2: Product: ConBee II
[So Dez 4 19:15:02 2022] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[So Dez 4 19:15:02 2022] usb 1-2: SerialNumber: DE2219489
[So Dez 4 19:15:02 2022] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[So Dez 4 19:19:44 2022] perf: interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[So Dez 4 19:21:46 2022] perf: interrupt took too long (3153 > 3141), lowering kernel.perf_event_max_sample_rate to 63250
[So Dez 4 19:24:52 2022] perf: interrupt took too long (3967 > 3941), lowering kernel.perf_event_max_sample_rate to 50250
[So Dez 4 19:29:32 2022] perf: interrupt took too long (4962 > 4958), lowering kernel.perf_event_max_sample_rate to 40250
[So Dez 4 19:37:11 2022] perf: interrupt took too long (6204 > 6202), lowering kernel.perf_event_max_sample_rate to 32000
[So Dez 4 19:47:56 2022] FS-Cache: Loaded
[So Dez 4 19:47:56 2022] FS-Cache: Netfs 'cifs' registered for caching
[So Dez 4 19:47:56 2022] Key type cifs.spnego registered
[So Dez 4 19:47:56 2022] Key type cifs.idmap registered
[So Dez 4 19:47:56 2022] CIFS: Attempting to mount \\192.168.178.200\ioBrokerBackup
[So Dez 4 19:48:00 2022] CIFS: VFS: Error connecting to socket. Aborting operation.
[So Dez 4 19:48:00 2022] CIFS: VFS: cifs_mount failed w/return code = -113
[So Dez 4 19:48:00 2022] CIFS: No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3.1.1), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3.1.1 (or even SMB3 or SMB2.1) specify vers=1.0 on mount.
[So Dez 4 19:48:00 2022] CIFS: Attempting to mount \\192.168.178.200\ioBrokerBackup
[So Dez 4 19:48:06 2022] CIFS: VFS: Error connecting to socket. Aborting operation.
[So Dez 4 19:48:06 2022] CIFS: VFS: cifs_mount failed w/return code = -113
[So Dez 4 20:13:38 2022] perf: interrupt took too long (7933 > 7755), lowering kernel.perf_event_max_sample_rate to 25000
klaus@ioroker:~$
@thomas-braun Spuckt reichlich aus 
letzten Zeilen
Device= 1.00
[ 85.615975] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 85.615982] usb 1-2: Product: ConBee II
[ 85.615988] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 85.615994] usb 1-2: SerialNumber: DE2219489
[ 85.618028] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 89.005344] usb 1-2: USB disconnect, device number 7
[ 89.385250] usb 1-2: new full-speed USB device number 8 using xhci_hcd
[ 89.534839] usb 1-2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 89.534851] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 89.534853] usb 1-2: Product: ConBee II
[ 89.534856] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 89.534858] usb 1-2: SerialNumber: DE2219489
[ 89.536528] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 127.579902] usb 1-2: USB disconnect, device number 8
[ 127.891262] usb 1-2: new full-speed USB device number 9 using xhci_hcd
[ 128.041402] usb 1-2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 128.041423] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 128.041430] usb 1-2: Product: ConBee II
[ 128.041436] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 128.041442] usb 1-2: SerialNumber: DE2219489
[ 128.043717] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 131.428552] usb 1-2: USB disconnect, device number 9
[ 131.807175] usb 1-2: new full-speed USB device number 10 using xhci_hcd
[ 131.957155] usb 1-2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 131.957176] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 131.957184] usb 1-2: Product: ConBee II
[ 131.957190] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 131.957196] usb 1-2: SerialNumber: DE2219489
[ 131.959466] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 161.016384] usb 1-2: USB disconnect, device number 10
[ 161.324306] usb 1-2: new full-speed USB device number 11 using xhci_hcd
[ 161.474333] usb 1-2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 161.474345] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 161.474348] usb 1-2: Product: ConBee II
[ 161.474351] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 161.474353] usb 1-2: SerialNumber: DE2219489
[ 161.476438] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 164.867707] usb 1-2: USB disconnect, device number 11
[ 165.216054] usb 1-2: new full-speed USB device number 12 using xhci_hcd
[ 165.366042] usb 1-2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 165.366063] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 165.366071] usb 1-2: Product: ConBee II
[ 165.366077] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 165.366083] usb 1-2: SerialNumber: DE2219489
[ 165.373468] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 200.424948] usb 1-2: USB disconnect, device number 12
[ 200.736900] usb 1-2: new full-speed USB device number 13 using xhci_hcd
[ 200.887450] usb 1-2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 200.887462] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 200.887465] usb 1-2: Product: ConBee II
[ 200.887467] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 200.887469] usb 1-2: SerialNumber: DE2219489
[ 200.891185] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 204.275499] usb 1-2: USB disconnect, device number 13
[ 204.652843] usb 1-2: new full-speed USB device number 14 using xhci_hcd
[ 204.802942] usb 1-2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 204.802955] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 204.802958] usb 1-2: Product: ConBee II
[ 204.802961] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 204.802963] usb 1-2: SerialNumber: DE2219489
[ 204.804509] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 242.855120] usb 1-2: USB disconnect, device number 14
[ 243.162762] usb 1-2: new full-speed USB device number 15 using xhci_hcd
[ 243.312389] usb 1-2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 243.312401] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 243.312404] usb 1-2: Product: ConBee II
[ 243.312407] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 243.312409] usb 1-2: SerialNumber: DE2219489
[ 243.313962] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 246.706183] usb 1-2: USB disconnect, device number 15
[ 247.054585] usb 1-2: new full-speed USB device number 16 using xhci_hcd
[ 247.204719] usb 1-2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 247.204730] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 247.204733] usb 1-2: Product: ConBee II
[ 247.204736] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 247.204738] usb 1-2: SerialNumber: DE2219489
[ 247.206996] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 284.267146] usb 1-2: USB disconnect, device number 16
[ 284.577561] usb 1-2: new full-speed USB device number 17 using xhci_hcd
[ 284.727013] usb 1-2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 284.727024] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 284.727027] usb 1-2: Product: ConBee II
[ 284.727029] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 284.727032] usb 1-2: SerialNumber: DE2219489
[ 284.728944] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 288.120604] usb 1-2: USB disconnect, device number 17
[ 288.469596] usb 1-2: new full-speed USB device number 18 using xhci_hcd
[ 288.619365] usb 1-2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 288.619378] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 288.619381] usb 1-2: Product: ConBee II
[ 288.619384] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 288.619386] usb 1-2: SerialNumber: DE2219489
[ 288.622610] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 570.738313] perf: interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[ 692.090403] perf: interrupt took too long (3153 > 3141), lowering kernel.perf_event_max_sample_rate to 63250
[ 878.401433] perf: interrupt took too long (3967 > 3941), lowering kernel.perf_event_max_sample_rate to 50250
[ 1158.961071] perf: interrupt took too long (4962 > 4958), lowering kernel.perf_event_max_sample_rate to 40250
[ 1617.912375] perf: interrupt took too long (6204 > 6202), lowering kernel.perf_event_max_sample_rate to 32000
[ 2262.764304] FS-Cache: Loaded
[ 2262.868141] FS-Cache: Netfs 'cifs' registered for caching
[ 2262.899673] Key type cifs.spnego registered
[ 2262.899705] Key type cifs.idmap registered
[ 2262.902443] CIFS: Attempting to mount \\192.168.178.200\ioBrokerBackup
[ 2266.390149] CIFS: VFS: Error connecting to socket. Aborting operation.
[ 2266.390181] CIFS: VFS: cifs_mount failed w/return code = -113
[ 2266.426897] CIFS: No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3.1.1), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3.1.1 (or even SMB3 or SMB2.1) specify vers=1.0 on mount.
[ 2266.426907] CIFS: Attempting to mount \\192.168.178.200\ioBrokerBackup
[ 2272.570109] CIFS: VFS: Error connecting to socket. Aborting operation.
[ 2272.570142] CIFS: VFS: cifs_mount failed w/return code = -113
[ 3804.008511] perf: interrupt took too long (7933 > 7755), lowering kernel.perf_event_max_sample_rate to 25000
klaus@ioroker:~$
@thomas-braun dauert das immer soooooo lange steht immer noch und kein Ergebnis
?
klaus@ioroker:~$ dmesg -T | grep -i ext4
dmesg: read kernel buffer failed: Operation not permitted
@thomas-braun
ein mini PC extra dafür gekauft!
klaus@ioroker:~$ iobroker start
klaus@ioroker:~$ iobroker update
No connection to databases possible ...
