Hallo gibt es eine Möglichkeit die kompletten Daten des WR APSystems EZ1-M in den Iobroker zu bekommen?

Hallo, mit dem MQTT Adapter kann man Binary File empfangen. Nur wie verarbeite ich diese weiter?
In meinem Fall bekomme ich ein Bild als Binary Message. Den Datenpunkt habe ich schon auf File umgestellt aber wie kann ich das Bild jetzt zb in der Vis anzeigen oder per Telegram weiter senden?

Hallo gibt es eine Möglichkeit die kompletten Daten des WR APSystems EZ1-M in den Iobroker zu bekommen?

@peter_n
Geht der Adpater auch mit dem EZ1-M ?

Gude,
welche Zigbee Thermostate sind den zu empfhelen.
Will das Max System so langsam rausschmeißen.
Homematic kommt nicht in Frage weil ich mir nicht noch ne CCU hinstellen will.
Für Zigbee nutze ich ein Conbee 2 Stick. Mit dem bin ich sehr zufrieden.

Hallo ich betreibe Proxmox auf einem Nuc. Jetzt hat er sich innerhalb von wenigen Tagen zweimal aufgehängt. Hier der Log vom heutigen "ende". Was könnte das sein ?

Nov 23 16:55:11 local kernel: ata1: SError: { HostInt CommWake 10B8B DevExch }
Nov 23 16:55:11 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 16:55:11 local kernel: ata1.00: cmd 61/10:00:80:ee:70/00:00:0a:00:00/40 tag 0 ncq dma 8192 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
Nov 23 16:55:11 local kernel: ata1.00: status: { DRDY }
Nov 23 16:55:11 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 16:55:11 local kernel: ata1.00: cmd 61/10:20:08:ed:70/00:00:0a:00:00/40 tag 4 ncq dma 8192 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
Nov 23 16:55:11 local kernel: ata1.00: status: { DRDY }
Nov 23 16:55:11 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 16:55:11 local kernel: ata1.00: cmd 61/10:28:d0:ed:70/00:00:0a:00:00/40 tag 5 ncq dma 8192 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
Nov 23 16:55:11 local kernel: ata1.00: status: { DRDY }
Nov 23 16:55:11 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 16:55:11 local kernel: ata1.00: cmd 61/10:30:d8:c3:80/00:00:0a:00:00/40 tag 6 ncq dma 8192 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
Nov 23 16:55:11 local kernel: ata1.00: status: { DRDY }
Nov 23 16:55:11 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 16:55:11 local kernel: ata1.00: cmd 61/10:38:f8:c3:80/00:00:0a:00:00/40 tag 7 ncq dma 8192 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
Nov 23 16:55:11 local kernel: ata1.00: status: { DRDY }
Nov 23 16:55:11 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 16:55:11 local kernel: ata1.00: cmd 61/10:40:a8:c6:80/00:00:0a:00:00/40 tag 8 ncq dma 8192 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
Nov 23 16:55:11 local kernel: ata1.00: status: { DRDY }
Nov 23 16:55:11 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 16:55:11 local kernel: ata1.00: cmd 61/20:48:20:c5:80/00:00:0a:00:00/40 tag 9 ncq dma 16384 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
Nov 23 16:55:11 local kernel: ata1.00: status: { DRDY }
Nov 23 16:55:11 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 16:55:11 local kernel: ata1.00: cmd 61/10:50:60:ee:70/00:00:0a:00:00/40 tag 10 ncq dma 8192 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
Nov 23 16:55:11 local kernel: ata1.00: status: { DRDY }
Nov 23 16:55:11 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 16:55:11 local kernel: ata1.00: cmd 61/10:58:18:c7:80/00:00:0a:00:00/40 tag 11 ncq dma 8192 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
Nov 23 16:55:11 local kernel: ata1.00: status: { DRDY }
Nov 23 16:55:11 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 16:55:11 local kernel: ata1.00: cmd 61/20:60:b8:ee:70/00:00:0a:00:00/40 tag 12 ncq dma 16384 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
Nov 23 16:55:11 local kernel: ata1.00: status: { DRDY }
Nov 23 16:55:11 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 16:55:11 local kernel: ata1.00: cmd 61/10:68:30:c8:80/00:00:0a:00:00/40 tag 13 ncq dma 8192 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
Nov 23 16:55:11 local kernel: ata1.00: status: { DRDY }
Nov 23 16:55:11 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 16:55:11 local kernel: ata1.00: cmd 61/10:e0:f0:c4:80/00:00:0a:00:00/40 tag 28 ncq dma 8192 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
Nov 23 16:55:11 local kernel: ata1.00: status: { DRDY }
Nov 23 16:55:11 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 16:55:11 local kernel: ata1.00: cmd 61/20:e8:d8:c6:80/00:00:0a:00:00/40 tag 29 ncq dma 16384 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
Nov 23 16:55:11 local kernel: ata1.00: status: { DRDY }
Nov 23 16:55:11 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 16:55:11 local kernel: ata1.00: cmd 61/40:f0:20:c4:80/00:00:0a:00:00/40 tag 30 ncq dma 32768 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
Nov 23 16:55:11 local kernel: ata1.00: status: { DRDY }
Nov 23 16:55:11 local kernel: ata1: hard resetting link
Nov 23 16:55:11 local kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Nov 23 16:55:11 local kernel: ata1.00: configured for UDMA/133
Nov 23 16:55:11 local kernel: ahci 0000:00:17.0: port does not support device sleep
Nov 23 16:55:11 local kernel: ata1: EH complete
Nov 23 16:57:54 local kernel: ata1.00: exception Emask 0x0 SAct 0x800000 SErr 0x40000 action 0x6 frozen
Nov 23 16:57:54 local kernel: ata1: SError: { CommWake }
Nov 23 16:57:54 local kernel: ata1.00: failed command: READ FPDMA QUEUED
Nov 23 16:57:54 local kernel: ata1.00: cmd 60/00:b8:00:08:10/01:00:00:00:00/40 tag 23 ncq dma 131072 in
         res 40/00:01:06:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Nov 23 16:57:54 local kernel: ata1.00: status: { DRDY }
Nov 23 16:57:54 local kernel: ata1: hard resetting link
Nov 23 16:57:54 local kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Nov 23 16:57:54 local kernel: ata1.00: configured for UDMA/133
Nov 23 16:57:54 local kernel: ahci 0000:00:17.0: port does not support device sleep
Nov 23 16:57:54 local kernel: ata1: EH complete
Nov 23 16:57:54 local pve-firewall[967]: firewall update time (19.960 seconds)
Nov 23 16:57:54 local pvestatd[966]: status update time (32.424 seconds)
Nov 23 16:59:47 local kernel: ata1.00: exception Emask 0x0 SAct 0x40 SErr 0x40000 action 0x6 frozen
Nov 23 16:59:47 local kernel: ata1: SError: { CommWake }
Nov 23 16:59:47 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 16:59:47 local kernel: ata1.00: cmd 61/08:30:08:d9:84/00:00:0b:00:00/40 tag 6 ncq dma 4096 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Nov 23 16:59:47 local kernel: ata1.00: status: { DRDY }
Nov 23 16:59:47 local kernel: ata1: hard resetting link
Nov 23 16:59:47 local kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Nov 23 16:59:47 local kernel: ata1.00: configured for UDMA/133
Nov 23 16:59:47 local kernel: ahci 0000:00:17.0: port does not support device sleep
Nov 23 16:59:47 local kernel: ata1: EH complete
Nov 23 16:59:47 local pve-firewall[967]: firewall update time (12.933 seconds)
Nov 23 16:59:47 local pvestatd[966]: status update time (23.329 seconds)
Nov 23 17:03:13 local kernel: ata1: limiting SATA link speed to 3.0 Gbps
Nov 23 17:03:13 local kernel: ata1.00: exception Emask 0x10 SAct 0x80e00ff0 SErr 0x4040000 action 0xe frozen
Nov 23 17:03:13 local kernel: ata1.00: irq_stat 0x00000040, connection status changed
Nov 23 17:03:13 local kernel: ata1: SError: { CommWake DevExch }
Nov 23 17:03:13 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 17:03:13 local kernel: ata1.00: cmd 61/08:20:08:16:90/00:00:07:00:00/40 tag 4 ncq dma 4096 out
         res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
Nov 23 17:03:13 local kernel: ata1.00: status: { DRDY }
Nov 23 17:03:13 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 17:03:13 local kernel: ata1.00: cmd 61/08:28:50:18:90/00:00:07:00:00/40 tag 5 ncq dma 4096 out
         res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
Nov 23 17:03:13 local kernel: ata1.00: status: { DRDY }
Nov 23 17:03:13 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 17:03:13 local kernel: ata1.00: cmd 61/08:30:60:18:90/00:00:07:00:00/40 tag 6 ncq dma 4096 out
         res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
Nov 23 17:03:13 local kernel: ata1.00: status: { DRDY }
Nov 23 17:03:13 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 17:03:13 local kernel: ata1.00: cmd 61/08:38:08:19:90/00:00:07:00:00/40 tag 7 ncq dma 4096 out
         res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
Nov 23 17:03:13 local kernel: ata1.00: status: { DRDY }
Nov 23 17:03:13 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 17:03:13 local kernel: ata1.00: cmd 61/10:40:20:19:90/00:00:07:00:00/40 tag 8 ncq dma 8192 out
         res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
Nov 23 17:03:13 local kernel: ata1.00: status: { DRDY }
Nov 23 17:03:13 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 17:03:13 local kernel: ata1.00: cmd 61/08:48:88:14:91/00:00:07:00:00/40 tag 9 ncq dma 4096 out
         res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
Nov 23 17:03:13 local kernel: ata1.00: status: { DRDY }
Nov 23 17:03:13 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 17:03:13 local kernel: ata1.00: cmd 61/08:50:c8:17:94/00:00:07:00:00/40 tag 10 ncq dma 4096 out
         res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
Nov 23 17:03:13 local kernel: ata1.00: status: { DRDY }
Nov 23 17:03:13 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 17:03:13 local kernel: ata1.00: cmd 61/08:58:28:10:d0/00:00:07:00:00/40 tag 11 ncq dma 4096 out
         res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
Nov 23 17:03:13 local kernel: ata1.00: status: { DRDY }
Nov 23 17:03:13 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 17:03:13 local kernel: ata1.00: cmd 61/08:a8:00:10:10/00:00:01:00:00/40 tag 21 ncq dma 4096 out
         res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
Nov 23 17:03:13 local kernel: ata1.00: status: { DRDY }
Nov 23 17:03:13 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 17:03:13 local kernel: ata1.00: cmd 61/08:b0:38:10:10/00:00:01:00:00/40 tag 22 ncq dma 4096 out
         res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
Nov 23 17:03:13 local kernel: ata1.00: status: { DRDY }
Nov 23 17:03:13 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 17:03:13 local kernel: ata1.00: cmd 61/08:b8:08:10:90/00:00:07:00:00/40 tag 23 ncq dma 4096 out
         res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
Nov 23 17:03:13 local kernel: ata1.00: status: { DRDY }
Nov 23 17:03:13 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 17:03:13 local kernel: ata1.00: cmd 61/08:f8:80:10:90/00:00:07:00:00/40 tag 31 ncq dma 4096 out
         res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
Nov 23 17:03:13 local kernel: ata1.00: status: { DRDY }
Nov 23 17:03:13 local kernel: ata1: hard resetting link
Nov 23 17:03:13 local kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
Nov 23 17:03:13 local kernel: ata1.00: configured for UDMA/133
Nov 23 17:03:13 local kernel: ahci 0000:00:17.0: port does not support device sleep
Nov 23 17:03:13 local kernel: ata1: EH complete
Nov 23 17:05:08 local kernel: ata1.00: exception Emask 0x0 SAct 0x1000000 SErr 0x40000 action 0x6 frozen
Nov 23 17:05:08 local kernel: ata1: SError: { CommWake }
Nov 23 17:05:08 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 17:05:08 local kernel: ata1.00: cmd 61/08:c0:08:80:9c/00:00:07:00:00/40 tag 24 ncq dma 4096 out
         res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Nov 23 17:05:08 local kernel: ata1.00: status: { DRDY }
Nov 23 17:05:08 local kernel: ata1: hard resetting link
Nov 23 17:05:08 local kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
Nov 23 17:05:08 local kernel: ata1.00: configured for UDMA/133
Nov 23 17:05:08 local kernel: ahci 0000:00:17.0: port does not support device sleep
Nov 23 17:05:08 local kernel: ata1: EH complete
Nov 23 17:05:09 local pvestatd[966]: status update time (21.686 seconds)
Nov 23 17:05:30 local kernel: ata1.00: exception Emask 0x50 SAct 0x200000 SErr 0x40c0800 action 0xe frozen
Nov 23 17:05:30 local kernel: ata1.00: irq_stat 0x00000040, connection status changed
Nov 23 17:05:30 local kernel: ata1: SError: { HostInt CommWake 10B8B DevExch }
Nov 23 17:05:30 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 17:05:30 local kernel: ata1.00: cmd 61/18:a8:10:30:3d/00:00:17:00:00/40 tag 21 ncq dma 12288 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
Nov 23 17:05:30 local kernel: ata1.00: status: { DRDY }
Nov 23 17:05:30 local kernel: ata1: hard resetting link
Nov 23 17:05:30 local kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
Nov 23 17:05:30 local kernel: ata1.00: configured for UDMA/133
Nov 23 17:05:30 local kernel: ahci 0000:00:17.0: port does not support device sleep
Nov 23 17:05:30 local kernel: ata1: EH complete
Nov 23 17:07:23 local kernel: ata1.00: exception Emask 0x0 SAct 0x10 SErr 0x40000 action 0x6 frozen
Nov 23 17:07:23 local kernel: ata1: SError: { CommWake }
Nov 23 17:07:23 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 17:07:23 local kernel: ata1.00: cmd 61/08:20:38:10:10/00:00:01:00:00/40 tag 4 ncq dma 4096 out
         res 40/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
Nov 23 17:07:23 local kernel: ata1.00: status: { DRDY }
Nov 23 17:07:23 local kernel: ata1: hard resetting link
Nov 23 17:07:24 local kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
Nov 23 17:07:24 local kernel: ata1.00: configured for UDMA/133
Nov 23 17:07:24 local kernel: ahci 0000:00:17.0: port does not support device sleep
Nov 23 17:07:24 local kernel: ata1: EH complete
Nov 23 17:07:24 local pve-firewall[967]: firewall update time (16.929 seconds)
Nov 23 17:07:24 local pvestatd[966]: status update time (24.372 seconds)
Nov 23 17:08:34 local kernel: ata1: limiting SATA link speed to 1.5 Gbps
Nov 23 17:08:35 local kernel: ata1.00: exception Emask 0x50 SAct 0x10 SErr 0x40c0800 action 0xe frozen
Nov 23 17:08:35 local kernel: ata1.00: irq_stat 0x00000040, connection status changed
Nov 23 17:08:35 local kernel: ata1: SError: { HostInt CommWake 10B8B DevExch }
Nov 23 17:08:35 local kernel: ata1.00: failed command: READ FPDMA QUEUED
Nov 23 17:08:35 local kernel: ata1.00: cmd 60/00:20:00:08:10/01:00:00:00:00/40 tag 4 ncq dma 131072 in
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
Nov 23 17:08:35 local kernel: ata1.00: status: { DRDY }
Nov 23 17:08:35 local kernel: ata1: hard resetting link
Nov 23 17:08:35 local kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Nov 23 17:08:35 local kernel: ata1.00: configured for UDMA/133
Nov 23 17:08:35 local kernel: ahci 0000:00:17.0: port does not support device sleep
Nov 23 17:08:35 local kernel: ata1: EH complete
Nov 23 17:08:54 local kernel: ata1.00: exception Emask 0x50 SAct 0x4 SErr 0x40c0800 action 0xe frozen
Nov 23 17:08:54 local kernel: ata1.00: irq_stat 0x00000040, connection status changed
Nov 23 17:08:54 local kernel: ata1: SError: { HostInt CommWake 10B8B DevExch }
Nov 23 17:08:54 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 17:08:54 local kernel: ata1.00: cmd 61/08:10:58:2f:3a/00:00:08:00:00/40 tag 2 ncq dma 4096 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
Nov 23 17:08:54 local kernel: ata1.00: status: { DRDY }
Nov 23 17:08:54 local kernel: ata1: hard resetting link
Nov 23 17:08:55 local kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Nov 23 17:08:55 local kernel: ata1.00: configured for UDMA/133
Nov 23 17:08:55 local kernel: ahci 0000:00:17.0: port does not support device sleep
Nov 23 17:08:55 local kernel: ata1: EH complete
Nov 23 17:09:37 local kernel: ata1.00: exception Emask 0x10 SAct 0x38 SErr 0x4050000 action 0xe frozen
Nov 23 17:09:37 local kernel: ata1.00: irq_stat 0x00000040, connection status changed
Nov 23 17:09:37 local kernel: ata1: SError: { PHYRdyChg CommWake DevExch }
Nov 23 17:09:37 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 17:09:37 local kernel: ata1.00: cmd 61/08:18:10:56:74/00:00:16:00:00/40 tag 3 ncq dma 4096 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
Nov 23 17:09:37 local kernel: ata1.00: status: { DRDY }
Nov 23 17:09:37 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 17:09:37 local kernel: ata1.00: cmd 61/08:20:e0:44:0d/00:00:18:00:00/40 tag 4 ncq dma 4096 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
Nov 23 17:09:37 local kernel: ata1.00: status: { DRDY }
Nov 23 17:09:37 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 17:09:37 local kernel: ata1.00: cmd 61/08:28:50:20:98/00:00:16:00:00/40 tag 5 ncq dma 4096 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
Nov 23 17:09:37 local kernel: ata1.00: status: { DRDY }
Nov 23 17:09:37 local kernel: ata1: hard resetting link
Nov 23 17:09:38 local kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Nov 23 17:09:38 local kernel: ata1.00: configured for UDMA/133
Nov 23 17:09:38 local kernel: ahci 0000:00:17.0: port does not support device sleep
Nov 23 17:09:38 local kernel: ata1: EH complete
Nov 23 17:09:40 local kernel: ata1.00: exception Emask 0x50 SAct 0x806000 SErr 0x40c0800 action 0xe frozen
Nov 23 17:09:40 local kernel: ata1.00: irq_stat 0x00000040, connection status changed
Nov 23 17:09:40 local kernel: ata1: SError: { HostInt CommWake 10B8B DevExch }
Nov 23 17:09:40 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 17:09:40 local kernel: ata1.00: cmd 61/80:68:80:b2:3d/00:00:08:00:00/40 tag 13 ncq dma 65536 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
Nov 23 17:09:40 local kernel: ata1.00: status: { DRDY }
Nov 23 17:09:40 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 17:09:40 local kernel: ata1.00: cmd 61/80:70:00:b3:3d/00:00:08:00:00/40 tag 14 ncq dma 65536 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
Nov 23 17:09:40 local kernel: ata1.00: status: { DRDY }
Nov 23 17:09:40 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 17:09:40 local kernel: ata1.00: cmd 61/30:b8:50:b2:3d/00:00:08:00:00/40 tag 23 ncq dma 24576 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
Nov 23 17:09:40 local kernel: ata1.00: status: { DRDY }
Nov 23 17:09:40 local kernel: ata1: hard resetting link
Nov 23 17:09:40 local kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Nov 23 17:09:40 local kernel: ata1.00: configured for UDMA/133
Nov 23 17:09:40 local kernel: ahci 0000:00:17.0: port does not support device sleep
Nov 23 17:09:40 local kernel: ata1: EH complete
Nov 23 17:10:05 local kernel: ata1.00: limiting speed to UDMA/100:PIO4
Nov 23 17:10:05 local kernel: ata1.00: exception Emask 0x50 SAct 0x4000 SErr 0x40c0800 action 0xe frozen
Nov 23 17:10:05 local kernel: ata1.00: irq_stat 0x00000040, connection status changed
Nov 23 17:10:05 local kernel: ata1: SError: { HostInt CommWake 10B8B DevExch }
Nov 23 17:10:05 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 17:10:05 local kernel: ata1.00: cmd 61/18:70:f0:37:3d/00:00:17:00:00/40 tag 14 ncq dma 12288 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
Nov 23 17:10:05 local kernel: ata1.00: status: { DRDY }
Nov 23 17:10:05 local kernel: ata1: hard resetting link
Nov 23 17:10:06 local kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Nov 23 17:10:06 local kernel: ata1.00: configured for UDMA/100
Nov 23 17:10:06 local kernel: ahci 0000:00:17.0: port does not support device sleep
Nov 23 17:10:06 local kernel: ata1: EH complete
Nov 23 17:12:46 local kernel: ata1.00: exception Emask 0x50 SAct 0x4040 SErr 0x40c0800 action 0xe frozen
Nov 23 17:12:46 local kernel: ata1.00: irq_stat 0x00000040, connection status changed
Nov 23 17:12:46 local kernel: ata1: SError: { HostInt CommWake 10B8B DevExch }
Nov 23 17:12:46 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 17:12:46 local kernel: ata1.00: cmd 61/20:30:b8:34:34/00:00:08:00:00/40 tag 6 ncq dma 16384 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
Nov 23 17:12:46 local kernel: ata1.00: status: { DRDY }
Nov 23 17:12:46 local kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Nov 23 17:12:46 local kernel: ata1.00: cmd 61/08:70:d0:2f:3a/00:00:08:00:00/40 tag 14 ncq dma 4096 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
Nov 23 17:12:46 local kernel: ata1.00: status: { DRDY }
Nov 23 17:12:46 local kernel: ata1: hard resetting link
Nov 23 17:12:46 local kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Nov 23 17:12:46 local kernel: ata1.00: configured for UDMA/100
Nov 23 17:12:46 local kernel: ahci 0000:00:17.0: port does not support device sleep
Nov 23 17:12:46 local kernel: ata1: EH complete
-- Reboot --

@bananajoe perfekt das hat geklappt. Danke.

Hallo, ich zeige die Vis auf über ein Raspi auf einem Touch Monitor an.
Jetzt habe ich mit einer neuen Vis angefangen bekomme es aber nicht hin das die Scrollbalken weg bleiben.
Ich nutze Chromium und starte im Kiosk Modus (--kiosk).

Wie bekomme ich die Scrollbalken weg?

@glasfaser ich probiere es jetzt mal mit dem normalen. Mal schauen ob es damit geht.

@glasfaser Ich habe mich oben falsch ausgedrückt es ist das Advanced View in Widget 8 und das ist aus dem Materialdesign Adapter.

Morgen,
ich bin gerade dabei eine neue Vis zu bauen. Ich nutze das Widget View in Widget8 aus dem Materialdesign Adapter. Dieses Schalte ich über einen Datenpunkt (also die Views die im Widget angezeigt werden sollen).
Das geht für ein paar Minuten und dann schaltet er keine Views mehr im Widget. Dann muss ich die Vis neu Laden und dann geh es wieder. Kennt jemand diesen Fehler?