Hallo

hätte zu dem hier auch mal eine Frage, auf diesem Link:

http://www.iobroker.net/docu/?page_id=1671&lang=de

Was bedeutet beim Pi2B und Pi3B der Satz "Für große Installationen wegen des geringen RAM nur eingeschränkt zu empfehlen."

Was ist unter einer Grossen Installation zu verstehen? Anzahl der HM Geräte? Ist 182 Stück schon zu gross?

Oder installierten Adapter?

Wo ist die Grenze?

Danke

@arteck:

du kannst es dirket auf dem NAS installieren .. also ohne den Docker container

wobei 1 GB ist mager `

Danke Andre und arteck für die Infos.

Worauf laufen den eure Systeme wenn 1 GB Arbeitsspeicher knapp ist der Raspberry Pi3 oder der Pi2 haben ja auch nicht mehr, aber halt wahrscheinlich nur für IOBroker reserviert.

Wenn ihr mir die Frage noch beantwortet.

Nun ja dann denke ich bin ich mal raus aus dem Thema hier, da meine Frage ja nichts mehr mit dem Thema zu tun hat.

Danke

Hallo zusammen,

ich habe in dem Thema meine DS415play nicht gefunden und auf der ersten Seite in dem Link

https://www.synology.com/de-de/dsm/packages/Docker

ist meine DS415Play nicht drin so wie ich das sehe.

Also gibt es keinen weg IOBroker auf der DS415Play laufen zu lassen?

Ich weiß das das vielleicht ne unnötige Farge ist wenn es da schon nicht drin steht, aber einen Versuch ist es wert da die Forumssuche mit dem Begriff DS415play nicht viel ausgibt.

Warum würde das denn nicht gehen, ist die DS415play eventuell zu schwach auf der Brust?

Wäre natürlich schon verlockend es dort zu Installieren da die 24/7 läuft und es wird kein weiterer Pi benötigt.

Danke

Halo zusammen,

Was ist das für ein Fehler, wenn ich danach suche kommen nur russische Antworten.
682_capture.png

Hi

danke aber ich glaube an dem Punkt steige ich aus… Das ist zu hoch für mich.

Danke trotzdem

Also gestern war er ein paar mal da, einmal ungefähr zu dem Zeitpunkt als ich die Historie eingestellt habe.

Ein Ausschnitt aus dem Protokoll ist hier zu sehen:

http://forum.iobroker.net/viewtopic.php … 463#p18463

Eine Fritz box habe ich nicht nur so ein schrottiges Teil von Unity Media eine Technikolor box, die kann gar nichts…

Letzte Nacht ist die CCU 2 mal abgestürzt einmal um 2:34 und dann nochmal um 4:15 da war sie wieder da. Habe einen Watch Dog am laufen.

Am morgen habe ich das Log heruntergeladen und da war allerdings ein anderer Fehler sichtbar, zumindest um 4:09. dann später nochmal aber ohne Neustart der CCU. Um kurz vor sieben Habe ich dann neu gestartet aber warum er dann nochmal not connected bringt??? Da lief IO.Broker und die CCU die wurde da nicht neu gestartet...

hm-rpc-0 2016-01-25 06:55:46 error Error: not connected 
hm-rpc-0 2016-01-25 06:54:16 error Error: not connected 
hm-rpc-0 2016-01-25 06:52:46 error Error: not connected 
hm-rpc-0 2016-01-25 06:51:16 error Error: not connected 
hm-rpc-0 2016-01-25 06:49:46 error Error: not connected 
hm-rpc-0 2016-01-25 06:48:16 error Error: not connected 
hm-rpc-0 2016-01-25 06:46:46 error Error: not connected 
admin-0 2016-01-25 06:46:08 info Repository received successfully. 
admin-0 2016-01-25 06:45:59 info received all states 
host-raspberrypi 2016-01-25 06:45:59 info Update repository "default" under "conf/sources-dist.json" 
admin-0 2016-01-25 06:45:59 info received all objects 
admin-0 2016-01-25 06:45:54 info Use link "http://localhost:8081" to configure. 
admin-0 2016-01-25 06:45:54 info http server listening on port 8081 
admin-0 2016-01-25 06:45:54 info Request actual repository... 
admin-0 2016-01-25 06:45:54 info requesting all objects 
admin-0 2016-01-25 06:45:54 info requesting all states 
admin-0 2016-01-25 06:45:54 info starting. Version 0.7.3 in /opt/iobroker/node_modules/iobroker.admin 
host-raspberrypi 2016-01-25 06:45:46 info instance system.adapter.admin.0 started with pid 26743 
rpi-0 2016-01-25 06:45:20 warn Reconnection to DB. 
rpi-0 2016-01-25 01:50:37 warn Reconnection to DB. 
hm-rpc-2 2016-01-25 06:45:20 warn Reconnection to DB. 
hm-rpc-1 2016-01-25 06:45:20 info binrpc -> 221 devices 
hm-rpc-0 2016-01-25 06:45:20 warn Reconnection to DB. 
hm-rpc-1 2016-01-25 06:45:19 warn Reconnection to DB. 
hm-rpc-0 2016-01-25 06:45:19 warn Reconnection to DB. 
history-0 2016-01-25 06:45:18 warn Reconnection to DB. 
hm-rpc-1 2016-01-25 06:45:17 warn Reconnection to DB. 
history-0 2016-01-25 06:45:17 warn Reconnection to DB. 
hm-rega-0 2016-01-25 06:45:17 warn Reconnection to DB. 
hm-rega-0 2016-01-25 06:45:17 warn Reconnection to DB. 
web-0 2016-01-25 06:45:16 warn Reconnection to DB. 
web-0 2016-01-25 06:45:16 warn Reconnection to DB. 
host-raspberrypi 2016-01-25 06:45:16 info Restart adapter system.adapter.admin.0 because enabled 
host-raspberrypi 2016-01-25 06:45:16 warn instance system.adapter.admin.0 terminated due to SIGKILL 
hm-rpc-1 2016-01-25 06:45:16 info binrpc <- system.listMethods ["hm-rpc.1"] 
hm-rpc-0 2016-01-25 06:45:16 error Error: not connected 
hm-rpc-0 2016-01-25 06:42:06 error Error: not connected 
hm-rpc-0 2016-01-25 06:36:18 error Error: not connected 
hm-rpc-0 2016-01-25 06:34:48 error Error: not connected 
hm-rpc-0 2016-01-25 06:33:18 error Error: not connected 
hm-rpc-0 2016-01-25 06:31:48 error Error: not connected 
hm-rpc-0 2016-01-25 06:30:18 error Error: not connected 
hm-rpc-0 2016-01-25 06:28:48 error Error: not connected 
hm-rpc-0 2016-01-25 06:27:18 error Error: not connected 
hm-rpc-0 2016-01-25 06:25:48 error Error: not connected 
hm-rpc-0 2016-01-25 06:24:18 error Error: not connected 
hm-rpc-0 2016-01-25 06:22:48 error Error: not connected 
hm-rpc-0 2016-01-25 06:21:18 error Error: not connected 
hm-rpc-0 2016-01-25 06:19:48 error Error: not connected 
hm-rpc-0 2016-01-25 06:18:18 error Error: not connected 
hm-rpc-0 2016-01-25 06:16:48 error Error: not connected 
hm-rpc-0 2016-01-25 06:15:18 error Error: not connected 
hm-rpc-0 2016-01-25 06:13:48 error Error: not connected 
hm-rpc-0 2016-01-25 06:12:18 error Error: not connected 
hm-rpc-0 2016-01-25 06:10:48 error Error: not connected 
hm-rpc-0 2016-01-25 06:09:18 error Error: not connected 
hm-rpc-0 2016-01-25 06:07:48 error Error: not connected 
hm-rpc-0 2016-01-25 06:06:18 error Error: not connected 
hm-rpc-0 2016-01-25 06:04:48 error Error: not connected 
history-0 2016-01-25 06:04:42 info moving 961 entries from system.adapter.rpi.0.memRss to file 
hm-rpc-0 2016-01-25 06:03:18 error Error: not connected 
hm-rpc-0 2016-01-25 06:01:48 error Error: not connected 
hm-rpc-0 2016-01-25 06:00:18 error Error: not connected 
hm-rpc-0 2016-01-25 05:58:48 error Error: not connected 
hm-rpc-0 2016-01-25 05:57:18 error Error: not connected 
hm-rpc-0 2016-01-25 05:55:48 error Error: not connected 
hm-rpc-0 2016-01-25 05:54:18 error Error: not connected 
hm-rpc-0 2016-01-25 05:52:48 error Error: not connected 
hm-rpc-0 2016-01-25 05:51:18 error Error: not connected 
hm-rpc-0 2016-01-25 05:49:48 error Error: not connected 
hm-rpc-0 2016-01-25 05:48:18 error Error: not connected 
hm-rpc-0 2016-01-25 05:46:48 error Error: not connected 
hm-rpc-0 2016-01-25 05:45:18 error Error: not connected 
hm-rpc-0 2016-01-25 05:43:48 error Error: not connected 
hm-rpc-0 2016-01-25 05:42:18 error Error: not connected 
hm-rpc-0 2016-01-25 05:40:48 error Error: not connected 
hm-rpc-0 2016-01-25 05:39:18 error Error: not connected 
hm-rpc-0 2016-01-25 05:37:48 error Error: not connected 
hm-rpc-0 2016-01-25 05:36:18 error Error: not connected 
hm-rpc-0 2016-01-25 05:34:48 error Error: not connected 
hm-rpc-0 2016-01-25 05:33:18 error Error: not connected 
hm-rpc-0 2016-01-25 05:31:48 error Error: not connected 
hm-rpc-0 2016-01-25 05:30:18 error Error: not connected 
hm-rpc-0 2016-01-25 05:28:48 error Error: not connected 
hm-rpc-0 2016-01-25 05:27:18 error Error: not connected 
hm-rpc-0 2016-01-25 05:25:48 error Error: not connected 
hm-rpc-0 2016-01-25 05:24:18 error Error: not connected 
hm-rpc-0 2016-01-25 05:22:48 error Error: not connected 
hm-rpc-0 2016-01-25 05:21:18 error Error: not connected 
hm-rpc-0 2016-01-25 05:19:48 error Error: not connected 
hm-rpc-0 2016-01-25 05:18:18 error Error: not connected 
hm-rpc-0 2016-01-25 05:16:48 error Error: not connected 
hm-rpc-0 2016-01-25 05:15:18 error Error: not connected 
hm-rpc-0 2016-01-25 05:13:48 error Error: not connected 
hm-rpc-0 2016-01-25 05:12:18 error Error: not connected 
hm-rpc-0 2016-01-25 05:10:48 error Error: not connected 
hm-rpc-0 2016-01-25 05:09:18 error Error: not connected 
hm-rpc-0 2016-01-25 05:07:48 error Error: not connected 
hm-rpc-0 2016-01-25 05:06:18 error Error: not connected 
hm-rpc-0 2016-01-25 05:04:48 error Error: not connected 
admin-0 2016-01-25 05:04:41 info Repository received successfully. 
admin-0 2016-01-25 05:04:31 info received all states 
host-raspberrypi 2016-01-25 05:04:31 info Update repository "default" under "conf/sources-dist.json" 
admin-0 2016-01-25 05:04:31 info received all objects 
admin-0 2016-01-25 05:04:26 info Use link "http://localhost:8081" to configure. 
admin-0 2016-01-25 05:04:26 info http server listening on port 8081 
admin-0 2016-01-25 05:04:26 info Request actual repository... 
admin-0 2016-01-25 05:04:26 info requesting all objects 
admin-0 2016-01-25 05:04:26 info requesting all states 
admin-0 2016-01-25 05:04:26 info starting. Version 0.7.3 in /opt/iobroker/node_modules/iobroker.admin 
host-raspberrypi 2016-01-25 05:04:18 info instance system.adapter.admin.0 started with pid 23510 
host-raspberrypi 2016-01-25 05:03:48 info Restart adapter system.adapter.admin.0 because enabled 
host-raspberrypi 2016-01-25 05:03:48 warn instance system.adapter.admin.0 terminated due to SIGKILL 
hm-rpc-0 2016-01-25 05:03:18 error Error: not connected 
hm-rega-0 2016-01-25 05:03:02 error post request error: socket hang up 
hm-rega-0 2016-01-25 05:02:51 error post request error: socket hang up 
hm-rega-0 2016-01-25 05:02:39 error post request error: socket hang up 
hm-rpc-0 2016-01-25 05:01:47 error Error: not connected 
hm-rpc-0 2016-01-25 05:00:17 error Error: not connected 
hm-rpc-0 2016-01-25 04:58:47 error Error: not connected 
hm-rpc-0 2016-01-25 04:57:17 error Error: not connected 
hm-rpc-0 2016-01-25 04:55:47 error Error: not connected 
hm-rpc-0 2016-01-25 04:54:17 error Error: not connected 
hm-rpc-0 2016-01-25 04:52:47 error Error: not connected 
hm-rpc-0 2016-01-25 04:51:17 error Error: not connected 
hm-rpc-0 2016-01-25 04:49:47 error Error: not connected 
hm-rpc-0 2016-01-25 04:48:17 error Error: not connected 
hm-rpc-0 2016-01-25 04:46:47 error Error: not connected 
hm-rpc-0 2016-01-25 04:45:17 error Error: not connected 
hm-rpc-0 2016-01-25 04:43:47 error Error: not connected 
hm-rpc-0 2016-01-25 04:42:17 error Error: not connected 
hm-rpc-0 2016-01-25 04:40:47 error Error: not connected 
hm-rpc-0 2016-01-25 04:39:17 error Error: not connected 
hm-rpc-0 2016-01-25 04:37:47 error Error: not connected 
hm-rpc-0 2016-01-25 04:36:17 error Error: not connected 
hm-rpc-0 2016-01-25 04:34:47 error Error: not connected 
hm-rpc-0 2016-01-25 04:33:17 error Error: not connected 
hm-rpc-0 2016-01-25 04:31:47 error Error: not connected 
hm-rpc-0 2016-01-25 04:30:17 error Error: not connected 
hm-rpc-0 2016-01-25 04:28:47 error Error: not connected 
hm-rpc-0 2016-01-25 04:27:17 error Error: not connected 
hm-rpc-0 2016-01-25 04:25:47 error Error: not connected 
hm-rpc-0 2016-01-25 04:24:17 error Error: not connected 
hm-rpc-0 2016-01-25 04:22:47 error Error: not connected 
hm-rpc-0 2016-01-25 04:21:17 error Error: not connected 
hm-rpc-0 2016-01-25 04:19:47 error Error: not connected 
hm-rpc-0 2016-01-25 04:18:17 error Error: not connected 
hm-rpc-0 2016-01-25 04:16:47 error Error: not connected 
hm-rpc-0 2016-01-25 04:15:17 error Error: not connected 
hm-rpc-0 2016-01-25 04:13:47 error Error: not connected 
history-0 2016-01-25 04:12:44 info moving 961 entries from system.adapter.rpi.0.memHeapUsed to file 
hm-rega-0 2016-01-25 04:12:18 error post request error: connect ECONNREFUSED 
hm-rega-0 2016-01-25 04:12:17 error post request error: connect ECONNREFUSED 
hm-rega-0 2016-01-25 04:11:17 error post request error: connect ECONNREFUSED 
hm-rpc-0 2016-01-25 04:12:17 error Error: not connected 
hm-rega-0 2016-01-25 04:11:48 error post request error: connect ECONNREFUSED 
hm-rega-0 2016-01-25 04:11:47 error post request error: connect ECONNREFUSED 
hm-rega-0 2016-01-25 04:11:17 error post request error: connect ECONNREFUSED 
hm-rega-0 2016-01-25 04:10:48 error post request error: connect ECONNREFUSED 
hm-rega-0 2016-01-25 04:10:47 error post request error: connect ECONNREFUSED 
hm-rpc-0 2016-01-25 04:10:47 error Error: not connected 
hm-rega-0 2016-01-25 04:10:18 error post request error: connect ECONNREFUSED 
hm-rega-0 2016-01-25 04:10:17 error post request error: connect ECONNREFUSED 
hm-rega-0 2016-01-25 04:09:48 error post request error: connect ECONNREFUSED 
hm-rega-0 2016-01-25 04:09:47 error post request error: connect ECONNREFUSED 
hm-rega-0 2016-01-25 04:09:18 error post request error: connect ECONNREFUSED 
hm-rega-0 2016-01-25 04:09:17 error post request error: connect ECONNREFUSED 
hm-rpc-0 2016-01-25 04:09:17 error Error: not connected 
hm-rega-0 2016-01-25 04:08:48 error post request error: connect ECONNREFUSED 
hm-rega-0 2016-01-25 04:08:47 error post request error: connect ECONNREFUSED 
hm-rega-0 2016-01-25 04:08:27 info Got unexpected ID: hm-rpc.2.updated 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002004.3.STATE extended 
history-0 2016-01-25 04:08:27 info enabled logging of hm-rpc.2.CUX9002004.3.STATE 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002004.2.SET_INVERT extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002004.2.LEVEL extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002004.2.STATE extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002004.2.SETPOINT extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002004.1.SET_HUMIDITY extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002004.1.SET_TEMPERATURE extended 
history-0 2016-01-25 04:08:27 info enabled logging of hm-rpc.2.CUX9002004.2.STATE 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002004.1.HUM_MAX_24H extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002004.1.HUM_MIN_24H extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002004.1.TEMP_MAX_24H extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002004.1.TEMP_MIN_24H extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002004.1.ABS_HUMIDITY extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002004.1.DEW_POINT extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002004.1.HUMIDITY extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002004.1.TEMPERATURE extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002003.3.STATE extended 
history-0 2016-01-25 04:08:27 info enabled logging of hm-rpc.2.CUX9002003.3.STATE 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002003.2.SET_INVERT extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002003.2.LEVEL extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002003.2.STATE extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002003.2.SETPOINT extended 
history-0 2016-01-25 04:08:27 info enabled logging of hm-rpc.2.CUX9002003.2.STATE 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002003.1.SET_HUMIDITY extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002003.1.SET_TEMPERATURE extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002003.1.HUM_MAX_24H extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002003.1.HUM_MIN_24H extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002003.1.TEMP_MAX_24H extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002003.1.TEMP_MIN_24H extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002003.1.ABS_HUMIDITY extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002003.1.DEW_POINT extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002003.1.HUMIDITY extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002003.1.TEMPERATURE extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002002.3.STATE extended 
history-0 2016-01-25 04:08:27 info enabled logging of hm-rpc.2.CUX9002002.3.STATE 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002002.2.SET_INVERT extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002002.2.LEVEL extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002002.2.STATE extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002002.2.SETPOINT extended 
history-0 2016-01-25 04:08:27 info enabled logging of hm-rpc.2.CUX9002002.2.STATE 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002002.1.SET_HUMIDITY extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002002.1.SET_TEMPERATURE extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002002.1.HUM_MAX_24H extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002002.1.HUM_MIN_24H extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002002.1.TEMP_MAX_24H extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002002.1.TEMP_MIN_24H extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002002.1.ABS_HUMIDITY extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002002.1.DEW_POINT extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002002.1.HUMIDITY extended 
hm-rpc-2 2016-01-25 04:08:27 info object hm-rpc.2.CUX9002002.1.TEMPERATURE extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX9002001.3.STATE extended 
history-0 2016-01-25 04:08:26 info enabled logging of hm-rpc.2.CUX9002001.3.STATE 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX9002001.2.SET_INVERT extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX9002001.2.LEVEL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX9002001.2.STATE extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX9002001.2.SETPOINT extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX9002001.1.SET_HUMIDITY extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX9002001.1.SET_TEMPERATURE extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX9002001.1.HUM_MAX_24H extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX9002001.1.HUM_MIN_24H extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX9002001.1.TEMP_MAX_24H extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX9002001.1.TEMP_MIN_24H extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX9002001.1.ABS_HUMIDITY extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX9002001.1.DEW_POINT extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX9002001.1.HUMIDITY extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX9002001.1.TEMPERATURE extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.16.RAND extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.16.SET_STATE extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.16.CONTROL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.16.WORKING extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.16.CMD_QUERY_RET extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.16.CMD_RETL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.16.CMD_RETS extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.16.CMD_SETL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.16.CMD_SETS extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.16.SYSLOG extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.16.LOGIT extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.16.CMD_EXEC extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.16.CMD_KILL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.16.CMD_RUNL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.16.CMD_RUNS extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.16.PRESS_LONG extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.16.PRESS_SHORT extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.16.STATE extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.16.STOP extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.16.OLD_LEVEL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.16.LEVEL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.15.RAND extended 
history-0 2016-01-25 04:08:26 info enabled logging of hm-rpc.2.CUX9002001.2.STATE 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.15.SET_STATE extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.15.CONTROL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.15.WORKING extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.15.CMD_QUERY_RET extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.15.CMD_RETL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.15.CMD_RETS extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.15.CMD_SETL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.15.CMD_SETS extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.15.SYSLOG extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.15.LOGIT extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.15.CMD_EXEC extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.15.CMD_KILL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.15.CMD_RUNL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.15.CMD_RUNS extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.15.PRESS_LONG extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.15.PRESS_SHORT extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.15.STATE extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.15.STOP extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.15.OLD_LEVEL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.15.LEVEL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.14.RAND extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.14.SET_STATE extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.14.CONTROL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.14.WORKING extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.14.CMD_QUERY_RET extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.14.CMD_RETL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.14.CMD_RETS extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.14.CMD_SETL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.14.CMD_SETS extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.14.SYSLOG extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.14.LOGIT extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.14.CMD_EXEC extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.14.CMD_KILL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.14.CMD_RUNL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.14.CMD_RUNS extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.14.PRESS_LONG extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.14.PRESS_SHORT extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.14.STATE extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.14.STOP extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.14.OLD_LEVEL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.14.LEVEL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.13.RAND extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.13.SET_STATE extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.13.CONTROL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.13.WORKING extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.13.CMD_QUERY_RET extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.13.CMD_RETL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.13.CMD_RETS extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.13.CMD_SETL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.13.CMD_SETS extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.13.SYSLOG extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.13.LOGIT extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.13.CMD_EXEC extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.13.CMD_KILL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.13.CMD_RUNL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.13.CMD_RUNS extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.13.PRESS_LONG extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.13.PRESS_SHORT extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.13.STATE extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.13.STOP extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.13.OLD_LEVEL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.13.LEVEL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.12.RAND extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.12.SET_STATE extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.12.CONTROL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.12.WORKING extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.12.CMD_QUERY_RET extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.12.CMD_RETL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.12.CMD_RETS extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.12.CMD_SETL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.12.CMD_SETS extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.12.SYSLOG extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.12.LOGIT extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.12.CMD_EXEC extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.12.CMD_KILL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.12.CMD_RUNL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.12.CMD_RUNS extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.12.PRESS_LONG extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.12.PRESS_SHORT extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.12.STATE extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.12.STOP extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.12.OLD_LEVEL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.12.LEVEL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.11.RAND extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.11.SET_STATE extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.11.CONTROL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.11.WORKING extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.11.CMD_QUERY_RET extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.11.CMD_RETL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.11.CMD_RETS extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.11.CMD_SETL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.11.CMD_SETS extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.11.SYSLOG extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.11.LOGIT extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.11.CMD_EXEC extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.11.CMD_KILL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.11.CMD_RUNL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.11.CMD_RUNS extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.11.PRESS_LONG extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.11.PRESS_SHORT extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.11.STATE extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.11.STOP extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.11.OLD_LEVEL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.11.LEVEL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.10.RAND extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.10.SET_STATE extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.10.CONTROL extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.10.WORKING extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.10.CMD_QUERY_RET extended 
hm-rpc-2 2016-01-25 04:08:26 info object hm-rpc.2.CUX2801002.10.CMD_RETL extended 

Ich scheine Gläsern zu sein

Ja so ist es, ich habe nur noch zusätzlich gestern den RPI Monitor installiert. Und ich habe die Tage die History eingestellt sprich die Daten angeklickt zum Monitoren die ich möchte. So ca. 2 Stück pro Gerät und derzeit sind es rund 140 Geräte und dann noch bei ca. 80 Variablen.

Wenn ich mich recht erinnere kam einmal der Fehler als ich die Sachen zusammengeklickt habe und irgend wann hat IO.Broker die Änderungen nicht mehr übernommen. Das heißt ich habe auf das Uhren Symbol geklickt, aktiviert und gespeichert aber die Uhr wurde nicht mehr blau.

Aber eigentlich dachte ich das die CCU2 die Daten so oder so dem IO.Broker zur Verfügung stellt und IO.Broker sich einfach nur die rauspickt die archiviert werden sollen, oder habe ich das falsch verstanden? Das einzige was da zu Problemen führe kann sind die häufigen schreib zugriffe auf die SD Karte, daher habe ich nicht pauschal alle aktiviert. Ist das richtig?

Aber nun zurück zum Fehler, passt das hier ins Bild?

Aha jetzt werde ich draus schlau, den habe ich gar nicht installiert außerdem wird bei mir schon die Version 1.1.5 angeboten.

Kann das sein das der auf jeden fall zur Grund Installation gehört und ich daher die Probleme habe?

Oder besser gesagt muss man noch zusätzliche Adapter installieren außer den Admin, HM-rega und pro funk, RS485 und CUxD einen hm-rcp Adapter.

Sorry das ist off Topic und bitte verweist mich auf einen anderen tread und dann werde ich da weiter schauen. Di,e suche hat nix erbracht.

Denn mein Fehler hier äußert sich ähnlich wie hier beschrieben ich bekomme den Fehler "you are sending too fast" und dann hängt die CCU2 sich auf.

Und leider bin ich noch nicht wirklich fit in IO.Broker und stachse oft im dunkeln…

(Auf die Gefahr hin das jetzt gleich Steine fliegen hab ich die Frage gestellt... :oops: )

OK… Danke

aber ich steh grade echt auf dem Schlauch... wo finde ich diesen Adapter und seine Version nochmal?
421_view.txt

@Jey Cee:

So wie ich das mitbekommen hab wurde der javascript adapter schon gefixt. `

Ok aber ich habe so um den 21.01. ein Update auf aufgezogen auch im Zusammenhang mit dem was wir hier hatten:

http://forum.iobroker.net/viewtopic.php … 241#p18241

Seit her hatte ich diesen Fehler mit dem "you are sending too fast".

Das da was neues gekommen sein soll, habe ich nicht mit bekommen.