Huch… Wie was... [emoji28]
Gesendet von meinem ONEPLUS A3003 mit Tapatalk ` Vielen Dank für die Hilfestellung.. tut mir leid das mit das nicht selbst bewusst geworden ist… War der vollen überzeugen daß das einer ist..
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Huch… Wie was... [emoji28]
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Foto pi
~~<link_text text="https://uploads.tapatalk-cdn.com/201711 ... 530fb9.jpg">https://uploads.tapatalk-cdn.com/20171130/bb328ae59fa6dd90d33b8c277c530fb9.jpg</link_text>" />
Gesendet von meinem ONEPLUS A3003 mit Tapatalk~~
pi@raspberrypi:~ $ sudo modprobe pl011_raw_uart
modprobe: FATAL: Module pl011_raw_uart not found in directory /lib/modules/4.9.59+
pi@raspberrypi:~ $ sudo lsmod
Module Size Used by
iptable_filter 2220 0
bridge 112535 0
stp 2218 1 bridge
llc 5790 2 bridge,stp
fuse 94600 3
snd_bcm2835 23131 0
snd_pcm 97825 1 snd_bcm2835
snd_timer 22706 1 snd_pcm
snd 68784 3 snd_timer,snd_bcm2835,snd_pcm
bcm2835_gpiomem 3791 0
uio_pdrv_genirq 3718 0
uio 10166 1 uio_pdrv_genirq
fixed 3029 0
ip_tables 12512 1 iptable_filter
x_tables 20921 2 ip_tables,iptable_filter
ipv6 384613 13 bridge
pi@raspberrypi:~ $ sudo dmesg | grep uart
pi@raspberrypi:~ $ sudo pivccu-info
piVCCU version: 2.29.23-16
Kernel modules: Not available
Raw UART dev: Not available
Board serial: Unknown
State: STOPPED
Das Ergebniss:
pi@raspberrypi:~ $ uname -a
Linux raspberrypi 4.9.59+ #1047 Sun Oct 29 11:47:10 GMT 2017 armv6l GNU/Linux
pi@raspberrypi:~ $ ls -la /lib/modules/
total 16
drwxr-xr-x 4 root root 4096 Nov 1 15:39 .
drwxr-xr-x 16 root root 4096 Nov 1 16:15 ..
drwxr-xr-x 3 root root 4096 Nov 1 15:39 4.9.59+
drwxr-xr-x 3 root root 4096 Nov 30 19:04 4.9.59-v7+
pi@raspberrypi:~ $ ls -la /lib/modules/*/kernel/drivers/pivccu/*
-rw-r--r-- 1 root root 10732 Nov 19 12:53 /lib/modules/4.9.59-v7+/kernel/drivers/pivccu/dw_apb_raw_uart.ko
-rw-r--r-- 1 root root 16680 Nov 19 12:53 /lib/modules/4.9.59-v7+/kernel/drivers/pivccu/eq3_char_loop.ko
-rw-r--r-- 1 root root 17796 Nov 19 12:53 /lib/modules/4.9.59-v7+/kernel/drivers/pivccu/generic_raw_uart.ko
-rw-r--r-- 1 root root 9912 Nov 19 12:53 /lib/modules/4.9.59-v7+/kernel/drivers/pivccu/pl011_raw_uart.ko
-rw-r--r-- 1 root root 5332 Nov 19 12:53 /lib/modules/4.9.59-v7+/kernel/drivers/pivccu/plat_eq3ccu2.ko
pi@raspberrypi:~ $ lsmod
Module Size Used by
iptable_filter 2220 0
bridge 112535 0
stp 2218 1 bridge
llc 5790 2 bridge,stp
fuse 94600 3
snd_bcm2835 23131 0
snd_pcm 97825 1 snd_bcm2835
snd_timer 22706 1 snd_pcm
snd 68784 3 snd_timer,snd_bcm2835,snd_pcm
bcm2835_gpiomem 3791 0
uio_pdrv_genirq 3718 0
uio 10166 1 uio_pdrv_genirq
fixed 3029 0
ip_tables 12512 1 iptable_filter
x_tables 20921 2 ip_tables,iptable_filter
ipv6 384613 13 bridge
pi@raspberrypi:~ $ ls -la /boot/overlays/pivccu*
-rwxr-xr-x 1 root root 296 Nov 30 19:04 /boot/overlays/pivccu-bcm2835.dtbo
pi@raspberrypi:~ $ cat /proc/device-tree/compatible
brcm,bcm2835pi@raspberrypi:~ $ ls -la /proc/device-tree/soc/serial*/compatible
-r--r--r-- 1 root root 13 Nov 30 21:28 /proc/device-tree/soc/serial@7e201000/compatible
-r--r--r-- 1 root root 22 Nov 30 21:28 /proc/device-tree/soc/serial@7e215040/compatible
pi@raspberrypi:~ $ cat /proc/device-tree/soc/serial*/compatible
pivccu,pl011brcm,bcm2835-aux-uartpi@raspberrypi:~ $
Sorry, beim letzten Befehl muss es sources.list sein (Blöde Autokorrektur…) `
pi@raspberrypi:~ $ cat /etc/apt/sources.list
deb http://mirrordirector.raspbian.org/raspbian/ stretch main contrib non-free rpi
# Uncomment line below then 'apt-get update' to enable 'apt-get source'
#deb-src http://archive.raspbian.org/raspbian/ stretch main contrib non-free rpi
deb http://alexreinert.github.io/piVCCU stable main
deb http://alexreinert.github.io/piVCCU stable main
deb http://alexreinert.github.io/piVCCU testing main
Dieses hier aus dem Download bereich:
ioBroker_Image_RPi_2-3_20171109_stretch_pivCCU
pi@raspberrypi:~ $ sudo dpkg --get-selections | grep pivccu
pivccu install
pivccu-modules-raspberrypi install
pi@raspberrypi:~ $ sudo dpkg -s pivccu
Package: pivccu
Status: install ok installed
Priority: extra
Section: misc
Maintainer: Alexander Reinert <alex@areinert.de>Architecture: armhf
Version: 2.29.23-16
Depends: pivccu-kernel-modules
Pre-Depends: lxc, bridge-utils, systemd
Conffiles:
/etc/piVCCU/lxc.config 5fcfff8ebb7c6f59c48ee5861216edbf
/lib/systemd/system/pivccu.service c4c2be318a53f427124b4c0364d12636
Description: piVCCU - Homematic CCU LXC container
This package contains piVCCU - a Homematic CCU LXC container
Homepage: https://github.com/alexreinert/piVCCU
pi@raspberrypi:~ $ sudo dpkg -s pivccu-modules-raspberrypi
Package: pivccu-modules-raspberrypi
Status: install ok installed
Priority: extra
Section: kernel
Maintainer: Alexander Reinert <alex@areinert.de>Architecture: armhf
Version: 1.20171029-1-3
Provides: pivccu-kernel-modules
Depends: raspberrypi-kernel (= 1.20171029-1)
Description: Raspberry Pi kernel modules needed for Homematic
This package contains the Raspberry Pi kernel needed for Homematic.
Homepage: https://github.com/alexreinert/piVCCU
pi@raspberrypi:~ $ cat /etc/apt/source.list
cat: /etc/apt/source.list: No such file or directory
pi@raspberrypi:~ $</alex@areinert.de></alex@areinert.de>
Auch nach einem neustart besteht das Problem. Hab auch das ganze mal Spannung's frei gemacht
