@fabio @arteck @Asgothian @Thomas-Braun
Letzte Frage: Was meint Ihr mit Dimmer? Einen Dimm-Schalter hab ich - allerdings fehlt mir grad der Link, wie ich dadurch die nicht koppelbare Lampe gekoppelt bekomme 
Herzlichen Dank Euch allen für die konstruktive Lösungsfindung!
Fabio, ich fress' nen Besen - Du hast Recht! Die Osram Zigbee hat sich ohne Probleme connected - New Device joined. Ansteuerbar, läuft 1a!
Jetzt folgt natürlich die Quizfrage - wie bekomme ich das mit den Philips Hue Lampen hin? Via Umweg und Pairing über die Hue Bridge? Oder habt ihr da noch einen heißen Tipp parat? Gelistet ist die Hue Lampe ja im Zigbee2MQTT...
DANKE EUCH bis hierhin schon einmal zur Lösungsfindung!
Yes. Die großen Globes haben einmal smooth Licht aus/Licht an performt, die kleine Globe hatte kurz geblinkt. Und ja, jeweils eine neue Kachel mit "undefined".
Eine alte Osram Zigbee hab ich hier, ja!
@Asgothian - Coordinator stromlos und Adapter on/off wie von Dir beschrieben brachte leider keinen Erfolg. Dieselbe Fehlermeldung erscheint wieder. Ich komme wohl um Deine beschriebenen 9 Schritte nicht drumherum...
Die waren nagelneu...
Mea culpa again: Ich wollte Euch nicht in die Irre lotsen. Für mich war das die kausale Kette: Stromausfall - Container erstellt - Backup wiederhergestellt - Lampen anlernen geht nicht
Ich versuche mal das stromlosschalten, melde mich!
Das sind folgende 3:
Hi, Asgothian.
Mea culpa, ich versuche mal eben darauf einzugehen - ich wollte mit meinem Hilfegesuch keinesfalls Unmut stiften, also wirklich nicht! Ich bin kein Profi, und bei der Rückfrage nach einem log habe ich das mir zur Verfügung stehende log gepostet - mea culpa, wenn auch dies nicht korrekt war. Keinesfalls wollte ich "etwas vor die Füße werfen" oder "Erwartungen schüren, die Nadel im Heuhaufen während der Freizeit zu suchen" - ich frage lediglich nach Hilfe und Support und hab der Transparenz wegen alles gepostet, was mir zur Verfügung steht.
Ich werde nun einmal Deine beschriebenen Schritte durchführen mit der Hoffnung auf Erfolg, danke für diese Ratschläge!
@Asgothian - Oh, spannend. Bei der Pairing Message habe ich lediglich die ID des Geräts rausgenommen, sonst nichts. So lautet sie unzensiert:
Interview failed: 0x001788010dbf9f1c
Error: Failed to interview '0x001788010dbf9f1c', device has not successfully been paired. Try again !!!!!!!!!! . undefined
Hardware:
@arteck - mea culpa, dachte ich hätte alles passend bereitgestellt. Gerne nochmal ein ausführliches LOG hier:
@Thomas-Braun - danke, darum werde ich mich gleich kümmern!
Hi, danke für Deine Antwort!
Tatsächlich kein batteriebetriebenes Gerät - es geht hier um eine Philips Hue Lampe im Sockel, ganz konventionell mit Strom betrieben. Das kann nicht die Ursache sein... 
Auch danke Dir! Fair point: Ich muss das dringend updaten. Bzgl. Grafana-Repo: habe iob fix laufen lassen - hierüber müsste das gefixt sein bzgl. "multi-user.target", richtig?
Ich danke Euch!
Hallo Zusammen,
nachdem mein System nun über Monate fehlerfrei lief, ereilte mich ein (logischerweise) nicht geplanter Stromausfall. Ich habe nun einen Container im Proxmox der Einfachheit halber neu aufgesetzt und alles vom letzten funktionierenden Backup wiederhergestellt. Soweit, so gut!
Es funktioniert alles - außer das Pairen neuer Zigbee-Devices. Egal welches Device - ich habe mehrere probiert - kommt der Fehler:
Interview failed: XYZ
Error: Failed to interview 'XYZ', device has not successfully been paired. Try again !!!!!!!!!! . undefined
Habt ihr eine Idee, wie ich das gefixt bekommen könnte?
Linux User bitte hier den Output von iob diag einfügen.
Über das Debug erhalte ich folgende Informationen hierzu:
zigbee.0 2025-02-09 22:22:21.413 debug Type commandCheckin device {"type":"device","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":6,"_dateCode":"����������������","_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"deviceID":1026,"inputClusters":[0,1,3,32,1026,1280,2821],"outputClusters":[25],"profileID":260,"ID":1,"clusters":{"genBasic":{"attributes":{"modelId":"Motion Sensor-A","manufacturerName":"CentraLite","powerSource":3,"zclVersion":1,"stackVersion":2,"hwVersion":1,"dateCode":"����������������"}},"ssIasZone":{"attributes":{"iasCieAddr":"0x00124b00219fb99b","zoneState":1}},"msTemperatureMeasurement":{"attributes":{"measuredValue":1861}},"genPowerCfg":{"attributes":{"batteryVoltage":22,"batteryAlarmState":12}},"genPollCtrl":{"attributes":{"checkinInterval":14400}}},"deviceIeeeAddress":"0x000d6f000f83fe58","deviceNetworkAddress":57091,"_binds":[{"cluster":32,"type":"endpoint","deviceIeeeAddress":"0x00124b00219fb99b","endpointID":1},{"cluster":1026,"type":"endpoint","deviceIeeeAddress":"0x00124b00219fb99b","endpointID":1},{"cluster":1,"type":"endpoint","deviceIeeeAddress":"0x00124b00219fb99b","endpointID":1}],"_configuredReportings":[{"cluster":1026,"attrId":0,"minRepIntval":10,"maxRepIntval":3600,"repChange":100},{"cluster":1,"attrId":32,"minRepIntval":3600,"maxRepIntval":62000,"repChange":0}],"meta":{},"pendingRequests":{"sendInProgress":false,"ID":1,"deviceIeeeAddress":"0x000d6f000f83fe58"}},{"_events":{},"_eventsCount":0,"_maxListeners":100,"deviceID":263,"inputClusters":[0,1,3,1030,2821],"outputClusters":[3],"profileID":260,"ID":2,"clusters":{"genBasic":{"attributes":{}}},"deviceIeeeAddress":"0x000d6f000f83fe58","deviceNetworkAddress":57091,"_binds":[],"_configuredReportings":[],"meta":{},"pendingRequests":{"sendInProgress":false,"ID":2,"deviceIeeeAddress":"0x000d6f000f83fe58"}}],"_hardwareVersion":1,"_ieeeAddr":"0x000d6f000f83fe58","_interviewCompleted":true,"_interviewing":false,"_lastSeen":1739136141410,"_manufacturerID":4174,"_manufacturerName":"CentraLite","_modelID":"Motion Sensor-A","_networkAddress":57091,"_powerSource":"Battery","_stackVersion":2,"_type":"EndDevice","_zclVersion":1,"_linkquality":58,"_skipDefaultResponse":false,"_checkinInterval":3600,"_pendingRequestTimeout":3600000,"_customClusters":{},"meta":{"configured":1}},"mapped":{"zigbeeModel":["Motion Sensor-A"],"model":"AC01353010G","vendor":"OSRAM","description":"SMART+ Motion Sensor","fromZigbee":[{"cluster":"msTemperatureMeasurement","type":["attributeReport","readResponse"]},{"cluster":"ssIasZone","type":"commandStatusChangeNotification"},{"cluster":"genBasic","type":["attributeReport","readResponse"]},{"cluster":"genPowerCfg","type":["attributeReport","readResponse"]}],"toZigbee":[{"key":["scene_store"]},{"key":["scene_recall"]},{"key":["scene_add"]},{"key":["scene_remove"]},{"key":["scene_remove_all"]},{"key":["scene_rename"]},{"key":["read"]},{"key":["write"]},{"key":["command"]},{"key":["reset"]},{"key":["zclcommand"]}],"meta":{"battery":{"voltageToPercentage":{"min":2100,"max":3000}}},"exposes":[{"name":"temperature","label":"Temperature","access":1,"type":"numeric","property":"temperature","description":"Measured temperature value","unit":"°C"},{"name":"occupancy","label":"Occupancy","access":1,"type":"binary","property":"occupancy","description":"Indicates whether the device detected occupancy","value_on":true,"value_off":false},{"name":"battery","label":"Battery","access":1,"type":"numeric","property":"battery","description":"Remaining battery in %, can take up to 24 hours before reported","category":"diagnostic","unit":"%","value_max":100,"value_min":0},{"name":"voltage","label":"Voltage","access":1,"type":"numeric","property":"voltage","description":"Voltage of the battery in millivolts","category":"diagnostic","unit":"mV"},{"name":"battery_low","label":"Battery low","access":1,"type":"binary","property":"battery_low","description":"Indicates if the battery of this device is almost empty","category":"diagnostic","value_on":true,"value_off":false},{"name":"linkquality","label":"Linkquality","access":1,"type":"numeric","property":"linkquality","description":"Link quality (signal strength)","category":"diagnostic","unit":"lqi","value_max":255,"value_min":0}],"options":[{"name":"temperature_calibration","label":"Temperature calibration","access":2,"type":"numeric","property":"temperature_calibration","description":"Calibrates the temperature value (absolute offset), takes into effect on next report of device."},{"name":"temperature_precision","label":"Temperature precision","access":2,"type":"numeric","property":"temperature_precision","description":"Number of digits after decimal point for temperature, takes into effect on next report of device. This option can only decrease the precision, not increase it.","value_max":3,"value_min":0}]},"name":"0x000d6f000f83fe58"} incoming event: {"type":"commandCheckin","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":6,"_dateCode":"����������������","_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"deviceID":1026,"inputClusters":[0,1,3,32,1026,1280,2821],"outputClusters":[25],"profileID":260,"ID":1,"clusters":{"genBasic":{"attributes":{"modelId":"Motion Sensor-A","manufacturerName":"CentraLite","powerSource":3,"zclVersion":1,"stackVersion":2,"hwVersion":1,"dateCode":"����������������"}},"ssIasZone":{"attributes":{"iasCieAddr":"0x00124b00219fb99b","zoneState":1}},"msTemperatureMeasurement":{"attributes":{"measuredValue":1861}},"genPowerCfg":{"attributes":{"batteryVoltage":22,"batteryAlarmState":12}},"genPollCtrl":{"attributes":{"checkinInterval":14400}}},"deviceIeeeAddress":"0x000d6f000f83fe58","deviceNetworkAddress":57091,"_binds":[{"cluster":32,"type":"endpoint","deviceIeeeAddress":"0x00124b00219fb99b","endpointID":1},{"cluster":1026,"type":"endpoint","deviceIeeeAddress":"0x00124b00219fb99b","endpointID":1},{"cluster":1,"type":"endpoint","deviceIeeeAddress":"0x00124b00219fb99b","endpointID":1}],"_configuredReportings":[{"cluster":1026,"attrId":0,"minRepIntval":10,"maxRepIntval":3600,"repChange":100},{"cluster":1,"attrId":32,"minRepIntval":3600,"maxRepIntval":62000,"repChange":0}],"meta":{},"pendingRequests":{"sendInProgress":false,"ID":1,"deviceIeeeAddress":"0x000d6f000f83fe58"}},{"_events":{},"_eventsCount":0,"_maxListeners":100,"deviceID":263,"inputClusters":[0,1,3,1030,2821],"outputClusters":[3],"profileID":260,"ID":2,"clusters":{"genBasic":{"attributes":{}}},"deviceIeeeAddress":"0x000d6f000f83fe58","deviceNetworkAddress":57091,"_binds":[],"_configuredReportings":[],"meta":{},"pendingRequests":{"sendInProgress":false,"ID":2,"deviceIeeeAddress":"0x000d6f000f83fe58"}}],"_hardwareVersion":1,"_ieeeAddr":"0x000d6f000f83fe58","_interviewCompleted":true,"_interviewing":false,"_lastSeen":1739136141410,"_manufacturerID":4174,"_manufacturerName":"CentraLite","_modelID":"Motion Sensor-A","_networkAddress":57091,"_powerSource":"Battery","_stackVersion":2,"_type":"EndDevice","_zclVersion":1,"_linkquality":58,"_skipDefaultResponse":false,"_checkinInterval":3600,"_pendingRequestTimeout":3600000,"_customClusters":{},"meta":{"configured":1}},"endpoint":"[Circular]","data":{},"linkquality":58,"groupID":0,"cluster":"genPollCtrl","meta":{"zclTransactionSequenceNumber":16,"frameControl":{"frameType":1,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":false,"reservedBits":0}}}
zigbee.0 2025-02-09 22:22:21.412 debug Received Zigbee message from '0x000d6f000f83fe58', type 'commandCheckin', cluster 'genPollCtrl', data '{}' from endpoint 1 with groupID 0
zigbee.0 2025-02-09 22:22:21.410 debug handleMessage. {"type":"commandCheckin","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":6,"_dateCode":"����������������","_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"deviceID":1026,"inputClusters":[0,1,3,32,1026,1280,2821],"outputClusters":[25],"profileID":260,"ID":1,"clusters":{"genBasic":{"attributes":{"modelId":"Motion Sensor-A","manufacturerName":"CentraLite","powerSource":3,"zclVersion":1,"stackVersion":2,"hwVersion":1,"dateCode":"����������������"}},"ssIasZone":{"attributes":{"iasCieAddr":"0x00124b00219fb99b","zoneState":1}},"msTemperatureMeasurement":{"attributes":{"measuredValue":1861}},"genPowerCfg":{"attributes":{"batteryVoltage":22,"batteryAlarmState":12}},"genPollCtrl":{"attributes":{"checkinInterval":14400}}},"deviceIeeeAddress":"0x000d6f000f83fe58","deviceNetworkAddress":57091,"_binds":[{"cluster":32,"type":"endpoint","deviceIeeeAddress":"0x00124b00219fb99b","endpointID":1},{"cluster":1026,"type":"endpoint","deviceIeeeAddress":"0x00124b00219fb99b","endpointID":1},{"cluster":1,"type":"endpoint","deviceIeeeAddress":"0x00124b00219fb99b","endpointID":1}],"_configuredReportings":[{"cluster":1026,"attrId":0,"minRepIntval":10,"maxRepIntval":3600,"repChange":100},{"cluster":1,"attrId":32,"minRepIntval":3600,"maxRepIntval":62000,"repChange":0}],"meta":{},"pendingRequests":{"sendInProgress":false,"ID":1,"deviceIeeeAddress":"0x000d6f000f83fe58"}},{"_events":{},"_eventsCount":0,"_maxListeners":100,"deviceID":263,"inputClusters":[0,1,3,1030,2821],"outputClusters":[3],"profileID":260,"ID":2,"clusters":{"genBasic":{"attributes":{}}},"deviceIeeeAddress":"0x000d6f000f83fe58","deviceNetworkAddress":57091,"_binds":[],"_configuredReportings":[],"meta":{},"pendingRequests":{"sendInProgress":false,"ID":2,"deviceIeeeAddress":"0x000d6f000f83fe58"}}],"_hardwareVersion":1,"_ieeeAddr":"0x000d6f000f83fe58","_interviewCompleted":true,"_interviewing":false,"_lastSeen":1739136141410,"_manufacturerID":4174,"_manufacturerName":"CentraLite","_modelID":"Motion Sensor-A","_networkAddress":57091,"_powerSource":"Battery","_stackVersion":2,"_type":"EndDevice","_zclVersion":1,"_linkquality":58,"_skipDefaultResponse":false,"_checkinInterval":3600,"_pendingRequestTimeout":3600000,"_customClusters":{},"meta":{"configured":1}},"endpoint":"[Circular]","data":{},"linkquality":58,"groupID":0,"cluster":"genPollCtrl","meta":{"zclTransactionSequenceNumber":16,"frameControl":{"frameType":1,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":false,"reservedBits":0}}}
Und zu guter Letzt IoB-Diag:
========== Start marking the full check here ===========
```bash
Script v.2025-02-02
*** BASE SYSTEM ***
Static hostname: IoBroker-Main
Icon name: computer-container
Chassis: container
Virtualization: lxc
Operating System: Debian GNU/Linux 11 (bullseye)
Kernel: Linux 6.8.12-4-pve
Architecture: x86-64
OS is similar to:
model name : Intel(R) Core(TM) i3-6100T CPU @ 3.20GHz
Docker : false
Virtualization : lxc
Kernel : x86_64
Userland : 64 bit
Systemuptime and Load:
22:39:29 up 4:41, 1 user, load average: 0.28, 0.39, 0.45
CPU threads: 4
*** LIFE CYCLE STATUS ***
Debian 'bullseye' is the current oldstable version. Please upgrade to the latest stable release 'bookworm' in due time!
*** TIME AND TIMEZONES ***
Local time: Sun 2025-02-09 22:39:29 CET
Universal time: Sun 2025-02-09 21:39:29 UTC
RTC time: n/a
Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
NTP service: inactive
RTC in local TZ: no
*** Users and Groups ***
User that called 'iob diag':
phil
HOME=/home/phil
GROUPS=phil sudo iobroker
User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth
*** DISPLAY-SERVER SETUP ***
Display-Server: false
Desktop:
Terminal: tty
System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix'
*** MEMORY ***
total used free shared buff/cache available
Mem: 31G 4.0G 26G 0.0K 1.2G 27G
Swap: 512M 0B 512M
Total: 32G 4.0G 27G
Active iob-Instances: 58
31988 M total memory
4002 M used memory
4073 M active memory
815 M inactive memory
26832 M free memory
0 M buffer memory
1153 M swap cache
512 M total swap
0 M used swap
512 M free swap
*** top - Table Of Processes ***
top - 22:39:29 up 4:41, 1 user, load average: 0.28, 0.39, 0.45
Tasks: 87 total, 1 running, 86 sleeping, 0 stopped, 0 zombie
%Cpu(s): 1.6 us, 0.0 sy, 0.0 ni, 98.4 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st
MiB Mem : 31988.4 total, 26832.1 free, 4002.9 used, 1153.4 buff/cache
MiB Swap: 512.0 total, 512.0 free, 0.0 used. 27985.4 avail Mem
*** FAILED SERVICES ***
UNIT LOAD ACTIVE SUB DESCRIPTION
* run-rpc_pipefs.mount loaded failed failed RPC Pipe File System
* sys-kernel-config.mount loaded failed failed Kernel Configuration File System
* systemd-journald-audit.socket loaded failed failed Journal Audit Socket
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
3 loaded units listed.
*** DMESG CRITICAL ERRORS ***
dmesg: read kernel buffer failed: Operation not permitted
No critical errors detected
*** FILESYSTEM ***
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/pve-vm--100--disk--0 ext4 837G 21G 774G 3% /
none tmpfs 492K 4.0K 488K 1% /dev
udev devtmpfs 16G 0 16G 0% /dev/tty
tmpfs tmpfs 16G 0 16G 0% /dev/shm
tmpfs tmpfs 6.3G 132K 6.3G 1% /run
tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs tmpfs 3.2G 0 3.2G 0% /run/user/1000
Messages concerning ext4 filesystem in dmesg:
dmesg: read kernel buffer failed: Operation not permitted
Show mounted filesystems:
TARGET SOURCE FSTYPE OPTIONS
/ /dev/mapper/pve-vm--100--disk--0 ext4 rw,relatime,stripe=16
Files in neuralgic directories:
/var:
5.1G /var/
3.0G /var/log/journal/7ede3beef539449785826f7d5618ca12
3.0G /var/log/journal
3.0G /var/log
1.5G /var/cache/apt
Hint: You are currently not seeing messages from other users and the system.
Users in groups 'adm', 'systemd-journal' can see all messages.
Pass -q to turn off this notice.
Archived and active journals take up 136.0M in the file system.
/opt/iobroker/backups:
4.7G /opt/iobroker/backups/
/opt/iobroker/iobroker-data:
1.9G /opt/iobroker/iobroker-data/
1.6G /opt/iobroker/iobroker-data/files
617M /opt/iobroker/iobroker-data/files/javascript.admin
560M /opt/iobroker/iobroker-data/files/javascript.admin/static
558M /opt/iobroker/iobroker-data/files/javascript.admin/static/js
The five largest files in iobroker-data are:
78M /opt/iobroker/iobroker-data/objects.jsonl
39M /opt/iobroker/iobroker-data/files/vis.0/main/img/25-ServerIT/595455744.gif
38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map
35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
33M /opt/iobroker/iobroker-data/files/meteoalarm.admin/geocodes.json
USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':
No Devices found 'by-id'
HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
tcp
*** NodeJS-Installation ***
/usr/bin/nodejs v20.18.2
/usr/bin/node v20.18.2
/usr/bin/npm 10.8.2
/usr/bin/npx 10.8.2
/usr/bin/corepack 0.29.4
nodejs:
Installed: 20.18.2-1nodesource1
Candidate: 20.18.2-1nodesource1
Version table:
*** 20.18.2-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
100 /var/lib/dpkg/status
20.18.1-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.18.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.17.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.16.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.15.1-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.15.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.14.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.13.1-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.13.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.12.2-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.12.1-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.12.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.11.1-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.11.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.10.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.9.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.8.1-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.8.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.7.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.6.1-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.6.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.5.1-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.5.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.4.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.3.1-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.3.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.2.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.1.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
20.0.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
12.22.12~dfsg-1~deb11u5 500
500 http://security.debian.org bullseye-security/main amd64 Packages
12.22.12~dfsg-1~deb11u4 500
500 http://ftp.debian.org/debian bullseye/main amd64 Packages
Temp directories causing deletion problem: 0
No problems detected
Errors in npm tree: 0
No problems detected
*** ioBroker-Installation ***
ioBroker Status
iobroker is running on this host.
Objects type: jsonl
States type: jsonl
Hosts:
IoBroker-Main IoBroker-Main (version: 7.0.6, hostname: IoBroker-Main , alive, uptime: 16916)
RaspberryPi4IoBroker-Slave RaspberryPi4IoBroker-Slave (version: 5.0.3, hostname: RaspberryPi4IoBroker-Slave, alive, uptime: 228)
Core adapters versions
js-controller: 7.0.6
admin: 7.4.10
javascript: 8.8.3
nodejs modules from github: 2
+-- iobroker.icons-open-icon-library-png@0.1.3 (git+ssh://git@github.com/ioBroker/ioBroker.icons-open-icon-library-png.git#0847a79d713ee6725ccb6ccfb044c025b73ec946)
| +-- syno@3.0.0 (git+https://git@github.com/MeisterTR/syno.git#0104a973d33fe332aa6b1ab5be7fe8c57d3c68b0)
Adapter State
+ system.adapter.accuweather.0 : accuweather : IoBroker-Main - enabled
+ system.adapter.admin.0 : admin : IoBroker-Main - enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alarm.0 : alarm : IoBroker-Main - enabled
+ system.adapter.alexa2.0 : alexa2 : IoBroker-Main - enabled
system.adapter.alias-manager.0 : alias-manager : IoBroker-Main - enabled
system.adapter.apple-find-me.0 : apple-find-me : IoBroker-Main - disabled
+ system.adapter.backitup.0 : backitup : IoBroker-Main - enabled
+ system.adapter.backitup.1 : backitup : RaspberryPi4IoBroker-Slave - disabled
system.adapter.birthdays.0 : birthdays : IoBroker-Main - enabled
system.adapter.ble.0 : ble : IoBroker-Main - disabled
system.adapter.ble.1 : ble : RaspberryPi4IoBroker-Slave - disabled
+ system.adapter.cloud.0 : cloud : IoBroker-Main - enabled
system.adapter.coronavirus-statistics.0 : coronavirus-statistics: IoBroker-Main - enabled
system.adapter.daswetter.0 : daswetter : IoBroker-Main - enabled
+ system.adapter.device-reminder.0 : device-reminder : IoBroker-Main - enabled
system.adapter.devices.0 : devices : IoBroker-Main - enabled
+ system.adapter.discovery.0 : discovery : IoBroker-Main - enabled
system.adapter.dwd.0 : dwd : IoBroker-Main - enabled
+ system.adapter.eventlist.0 : eventlist : IoBroker-Main - enabled
+ system.adapter.fahrplan.0 : fahrplan : IoBroker-Main - enabled
system.adapter.feiertage.0 : feiertage : IoBroker-Main - enabled
system.adapter.flot.0 : flot : IoBroker-Main - enabled
+ system.adapter.followthesun.0 : followthesun : IoBroker-Main - enabled
+ system.adapter.fritzbox.0 : fritzbox : IoBroker-Main - enabled
+ system.adapter.fullybrowser.0 : fullybrowser : IoBroker-Main - enabled
+ system.adapter.heatingcontrol.0 : heatingcontrol : IoBroker-Main - enabled
+ system.adapter.hmip.0 : hmip : IoBroker-Main - enabled
+ system.adapter.hue-extended.0 : hue-extended : IoBroker-Main - enabled
system.adapter.hue.0 : hue : IoBroker-Main - disabled, port: 443
system.adapter.ical.0 : ical : IoBroker-Main - enabled
system.adapter.ical.1 : ical : IoBroker-Main - enabled
system.adapter.ical.2 : ical : IoBroker-Main - enabled
system.adapter.ical.3 : ical : IoBroker-Main - enabled
system.adapter.ical.4 : ical : IoBroker-Main - enabled
system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: IoBroker-Main - enabled
system.adapter.icons-fatcow-hosting.0 : icons-fatcow-hosting : IoBroker-Main - enabled
system.adapter.icons-icons8.0 : icons-icons8 : IoBroker-Main - enabled
system.adapter.icons-material-png.0 : icons-material-png : IoBroker-Main - enabled
system.adapter.icons-material-svg.0 : icons-material-svg : IoBroker-Main - enabled
system.adapter.icons-mfd-png.0 : icons-mfd-png : IoBroker-Main - enabled
system.adapter.icons-mfd-svg.0 : icons-mfd-svg : IoBroker-Main - enabled
system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: IoBroker-Main - enabled
system.adapter.icons-ultimate-png.0 : icons-ultimate-png : IoBroker-Main - enabled
+ system.adapter.influxdb.0 : influxdb : IoBroker-Main - enabled, port: 8086
+ system.adapter.info.0 : info : IoBroker-Main - enabled
+ system.adapter.iot.0 : iot : IoBroker-Main - enabled
+ system.adapter.jarvis.0 : jarvis : IoBroker-Main - enabled
+ system.adapter.javascript.0 : javascript : IoBroker-Main - enabled
system.adapter.javascript.1 : javascript : RaspberryPi4IoBroker-Slave - disabled
+ system.adapter.linkeddevices.0 : linkeddevices : IoBroker-Main - enabled
+ system.adapter.linux-control.0 : linux-control : IoBroker-Main - enabled
system.adapter.luftdaten.0 : luftdaten : IoBroker-Main - enabled
+ system.adapter.mercedesme.0 : mercedesme : IoBroker-Main - enabled
system.adapter.meross.0 : meross : IoBroker-Main - disabled
system.adapter.meteoalarm.0 : meteoalarm : IoBroker-Main - enabled
system.adapter.meteoalarm.1 : meteoalarm : IoBroker-Main - enabled
system.adapter.mihome-lamp.0 : mihome-lamp : IoBroker-Main - disabled, port: 54321
system.adapter.mihome-vacuum.0 : mihome-vacuum : IoBroker-Main - disabled, port: 54321
+ system.adapter.miio.0 : miio : IoBroker-Main - enabled
+ system.adapter.moma.0 : moma : IoBroker-Main - enabled
+ system.adapter.octoprint.0 : octoprint : IoBroker-Main - enabled
system.adapter.octoprint.1 : octoprint : RaspberryPi4IoBroker-Slave - disabled
system.adapter.openweathermap.0 : openweathermap : IoBroker-Main - enabled
+ system.adapter.parcel.0 : parcel : IoBroker-Main - enabled
+ system.adapter.pollenflug.0 : pollenflug : IoBroker-Main - enabled
+ system.adapter.pushover.0 : pushover : IoBroker-Main - enabled
+ system.adapter.radar2.0 : radar2 : IoBroker-Main - enabled
system.adapter.reolink.0 : reolink : IoBroker-Main - disabled
+ system.adapter.roadtraffic.0 : roadtraffic : IoBroker-Main - enabled
+ system.adapter.rpi2.0 : rpi2 : IoBroker-Main - enabled
system.adapter.rpi2.1 : rpi2 : RaspberryPi4IoBroker-Slave - disabled
+ system.adapter.scenes.0 : scenes : IoBroker-Main - enabled
+ system.adapter.shelly.0 : shelly : IoBroker-Main - enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.simple-api.0 : simple-api : IoBroker-Main - enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.smartcontrol.0 : smartcontrol : IoBroker-Main - enabled
+ system.adapter.smartthings.0 : smartthings : IoBroker-Main - enabled
+ system.adapter.socketio.0 : socketio : IoBroker-Main - enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.sonoff.0 : sonoff : IoBroker-Main - enabled, port: 1883, bind: 0.0.0.0
system.adapter.stockmarket.0 : stockmarket : IoBroker-Main - enabled
+ system.adapter.synology.0 : synology : IoBroker-Main - enabled, port: 5001
+ system.adapter.synology.1 : synology : IoBroker-Main - enabled, port: 5001
system.adapter.synology.2 : synology : IoBroker-Main - disabled, port: 48892
system.adapter.synology.3 : synology : IoBroker-Main - disabled, port: 5001
+ system.adapter.systeminfo.0 : systeminfo : IoBroker-Main - enabled
+ system.adapter.systeminfo.1 : systeminfo : IoBroker-Main - enabled
+ system.adapter.tankerkoenig.0 : tankerkoenig : IoBroker-Main - enabled
+ system.adapter.telegram.0 : telegram : IoBroker-Main - enabled, port: 8443, bind: 0.0.0.0
system.adapter.terminal.0 : terminal : IoBroker-Main - disabled, port: 8088, bind: 192.168.100.117 (SSL), run as: admin
+ system.adapter.text2command.0 : text2command : IoBroker-Main - enabled
+ system.adapter.time-switch.0 : time-switch : IoBroker-Main - enabled
+ system.adapter.tr-064.0 : tr-064 : IoBroker-Main - enabled
system.adapter.trashschedule.0 : trashschedule : IoBroker-Main - disabled
system.adapter.trashschedule.1 : trashschedule : IoBroker-Main - disabled
+ system.adapter.tvprogram.0 : tvprogram : IoBroker-Main - enabled
system.adapter.tvspielfilm.0 : tvspielfilm : IoBroker-Main - enabled
+ system.adapter.upnp.0 : upnp : IoBroker-Main - enabled
system.adapter.uv-protect.0 : uv-protect : IoBroker-Main - enabled
system.adapter.vis-bars.0 : vis-bars : IoBroker-Main - enabled
system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : IoBroker-Main - enabled
system.adapter.vis-colorpicker.0 : vis-colorpicker : IoBroker-Main - enabled
system.adapter.vis-fancyswitch.0 : vis-fancyswitch : IoBroker-Main - enabled
system.adapter.vis-google-fonts.0 : vis-google-fonts : IoBroker-Main - enabled
system.adapter.vis-history.0 : vis-history : IoBroker-Main - enabled
system.adapter.vis-hqwidgets.0 : vis-hqwidgets : IoBroker-Main - enabled
system.adapter.vis-icontwo.0 : vis-icontwo : IoBroker-Main - enabled
+ system.adapter.vis-inventwo.0 : vis-inventwo : IoBroker-Main - enabled
system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : IoBroker-Main - enabled
system.adapter.vis-justgage.0 : vis-justgage : IoBroker-Main - enabled
system.adapter.vis-keyboard.0 : vis-keyboard : IoBroker-Main - enabled
system.adapter.vis-map.0 : vis-map : IoBroker-Main - enabled
system.adapter.vis-material-advanced.0 : vis-material-advanced : IoBroker-Main - enabled
system.adapter.vis-material-webfont.0 : vis-material-webfont : IoBroker-Main - enabled
system.adapter.vis-material.0 : vis-material : IoBroker-Main - enabled
system.adapter.vis-materialdesign.0 : vis-materialdesign : IoBroker-Main - enabled
system.adapter.vis-metro.0 : vis-metro : IoBroker-Main - enabled
system.adapter.vis-plumb.0 : vis-plumb : IoBroker-Main - enabled
system.adapter.vis-rgraph.0 : vis-rgraph : IoBroker-Main - enabled
system.adapter.vis-timeandweather.0 : vis-timeandweather : IoBroker-Main - enabled
system.adapter.vis-weather.0 : vis-weather : IoBroker-Main - enabled
system.adapter.vis.0 : vis : IoBroker-Main - enabled
system.adapter.vodafone-speedtest.0 : vodafone-speedtest : IoBroker-Main - enabled
system.adapter.vofo-speedtest.0 : vofo-speedtest : IoBroker-Main - enabled
system.adapter.weatherunderground.0 : weatherunderground : IoBroker-Main - enabled
+ system.adapter.web.0 : web : IoBroker-Main - enabled, port: 8082, bind: 0.0.0.0, run as: admin
system.adapter.weblogin.0 : weblogin : IoBroker-Main - enabled
+ system.adapter.wifilight.0 : wifilight : IoBroker-Main - enabled
+ system.adapter.withings.0 : withings : IoBroker-Main - enabled
system.adapter.yeelight-2.0 : yeelight-2 : IoBroker-Main - disabled
+ system.adapter.zigbee.0 : zigbee : IoBroker-Main - enabled, port: tcp://192.168.178.48:20108
+ instance is alive
Enabled adapters with bindings
+ system.adapter.admin.0 : admin : IoBroker-Main - enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.influxdb.0 : influxdb : IoBroker-Main - enabled, port: 8086
+ system.adapter.shelly.0 : shelly : IoBroker-Main - enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.simple-api.0 : simple-api : IoBroker-Main - enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.socketio.0 : socketio : IoBroker-Main - enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.sonoff.0 : sonoff : IoBroker-Main - enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.synology.0 : synology : IoBroker-Main - enabled, port: 5001
+ system.adapter.synology.1 : synology : IoBroker-Main - enabled, port: 5001
+ system.adapter.telegram.0 : telegram : IoBroker-Main - enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0 : web : IoBroker-Main - enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0 : zigbee : IoBroker-Main - enabled, port: tcp://192.168.178.48:20108
ioBroker-Repositories
┌────────────────────────────────────────────────────────────────────────────────────────────────────────
│ (index) │ name │ url │ auto upgrade │
├────────────────────────────────────────────────────────────────────────────────────────────────────────
│ 0 │ 'Stable (default)' │ 'http://download.iobroker.net/sources-dist.json' │ false │
│ 1 │ 'Beta (latest)' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │
└────────────────────────────────────────────────────────────────────────────────────────────────────────
Active repo(s): Stable (default)
Upgrade policy: none
Installed ioBroker-Instances
Used repository: Stable (default)
Adapter "accuweather" : 2.1.0 , installed 2.1.0
Adapter "admin" : 7.4.10 , installed 7.4.10
Adapter "alarm" : 3.6.7 , installed 3.6.7
Adapter "alexa2" : 3.26.5 , installed 3.26.5
Adapter "alias-manager": 2.0.0 , installed 2.0.0
Adapter "backitup" : 3.0.31 , installed 3.0.31
Adapter "birthdays" : 3.1.0 , installed 3.1.0
Adapter "ble" : 0.14.0 , installed 0.14.0
Adapter "cloud" : 5.0.1 , installed 5.0.1
Adapter "coronavirus-statistics": 0.9.0, installed 0.9.0
Adapter "daswetter" : 3.2.2 , installed 3.2.2
Adapter "device-reminder": 3.1.2 , installed 3.1.2
Adapter "devices" : 1.1.5 , installed 1.1.5
Adapter "discovery" : 5.0.0 , installed 5.0.0
Adapter "dwd" : 2.8.5 , installed 2.8.5
Adapter "eventlist" : 2.0.1 , installed 2.0.1
Adapter "fahrplan" : 1.2.3 , installed 1.2.3
Adapter "feiertage" : 1.2.1 , installed 1.2.1
Adapter "flot" : 1.12.0 , installed 1.12.0
Adapter "followthesun" : 0.5.1 , installed 0.5.1
Adapter "fritzbox" : 0.6.0 , installed 0.6.0
Adapter "fullybrowser" : 3.0.12 , installed 3.0.12
Adapter "heatingcontrol": 2.12.13 , installed 2.12.13
Adapter "hmip" : 1.25.0 , installed 1.25.0
Adapter "hue" : 3.13.1 , installed 3.13.1
Adapter "ical" : 1.16.1 , installed 1.16.1
Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0
Adapter "icons-eclipse-smarthome-classic": 1.0.0, installed 1.0.0
Adapter "icons-fatcow-hosting": 0.1.0, installed 0.1.0
Adapter "icons-freepic": 1.0.0 , installed 1.0.0
Adapter "icons-icons8" : 0.0.1 , installed 0.0.1
Adapter "icons-material-png": 0.1.0, installed 0.1.0
Adapter "icons-material-svg": 0.1.0, installed 0.1.0
Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1
Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0
Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.3
Adapter "icons-smarthome": 1.0.0 , installed 1.0.0
Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter "influxdb" : 4.0.2 , installed 4.0.2
Adapter "iot" : 3.3.0 , installed 3.3.0
Adapter "jarvis" : 3.1.8 , installed 3.1.8
Adapter "javascript" : 8.8.3 , installed 8.8.3
Controller "js-controller": 7.0.6 , installed 7.0.6
Adapter "linkeddevices": 1.5.5 , installed 1.5.5
Adapter "linux-control": 1.1.5 , installed 1.1.5
Adapter "luftdaten" : 4.0.0 , installed 4.0.0
Adapter "meross" : 1.17.0 , installed 1.17.0
Adapter "meteoalarm" : 3.0.3 , installed 3.0.3
Adapter "mihome-lamp" : 1.1.0 , installed 1.1.0
Adapter "mihome-vacuum": 4.2.0 , installed 4.2.0
Adapter "moma" : 1.2.9 , installed 1.2.9
Adapter "octoprint" : 5.1.0 , installed 5.1.0
Adapter "openweathermap": 1.1.2 , installed 1.1.2
Adapter "pollenflug" : 2.0.0 , installed 2.0.0
Adapter "pushover" : 4.1.0 , installed 4.1.0
Adapter "radar2" : 2.2.0 , installed 2.2.0
Adapter "reolink" : 1.1.2 , installed 1.1.2
Adapter "roadtraffic" : 1.2.0 , installed 1.2.0
Adapter "rpi2" : 2.3.1 , installed 2.3.1
Adapter "scenes" : 3.2.3 , installed 3.2.3
Adapter "shelly" : 8.5.1 , installed 8.5.1
Adapter "simple-api" : 2.8.0 , installed 2.8.0
Adapter "smartcontrol" : 2.0.1 , installed 2.0.1
Adapter "socketio" : 6.7.1 , installed 6.7.1
Adapter "sonoff" : 3.1.2 , installed 3.1.2
Adapter "synology" : 3.1.0 , installed 3.1.0
Adapter "systeminfo" : 1.2.0 , installed 1.2.0
Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0
Adapter "telegram" : 4.0.0 , installed 4.0.0
Adapter "terminal" : 1.0.0 , installed 1.0.0
Adapter "text2command" : 3.0.3 , installed 3.0.3
Adapter "tr-064" : 4.3.0 , installed 4.3.0
Adapter "trashschedule": 3.3.0 , installed 3.3.0
Adapter "tvprogram" : 4.0.0 , installed 4.0.0
Adapter "tvspielfilm" : 2.1.0 , installed 2.1.0
Adapter "upnp" : 1.1.0 , installed 1.1.0
Adapter "uv-protect" : 0.6.5 , installed 0.6.5
Adapter "vis" : 1.5.6 , installed 1.5.6
Adapter "vis-2-widgets-radar-trap": 2.3.0, installed 2.3.0
Adapter "vis-bars" : 0.1.4 , installed 0.1.4
Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1
Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3
Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0
Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4
Adapter "vis-history" : 1.0.0 , installed 1.0.0
Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1
Adapter "vis-icontwo" : 1.11.0 , installed 1.11.0
Adapter "vis-inventwo" : 3.3.4 , installed 3.3.4
Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.1.1
Adapter "vis-justgage" : 2.1.7 , installed 2.1.7
Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2
Adapter "vis-map" : 1.1.2 , installed 1.1.2
Adapter "vis-material" : 0.2.0 , installed 0.2.0
Adapter "vis-material-advanced": 1.7.4, installed 1.7.4
Adapter "vis-materialdesign": 0.5.9, installed 0.5.9
Adapter "vis-metro" : 1.2.0 , installed 1.2.0
Adapter "vis-plumb" : 1.0.2 , installed 1.0.2
Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2
Adapter "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter "vis-weather" : 2.5.9 , installed 2.5.9
Adapter "weather-warnings": 0.7.3 , installed 0.7.3
Adapter "weatherunderground": 3.7.0, installed 3.7.0
Adapter "web" : 6.2.5 , installed 6.2.5
Adapter "welcome" : 1.0.2 , installed 1.0.2
Adapter "wifilight" : 1.2.2 , installed 1.2.2
Adapter "withings" : 0.0.13 , installed 0.0.13
Adapter "ws" : 2.6.2 , installed 2.6.2
Adapter "yeelight-2" : 1.4.0 , installed 1.4.0
Adapter "zigbee" : 1.10.14 , installed 1.10.14
Objects and States
Please stand by - This may take a while
Objects: 54596
States: 45203
*** OS-Repositories and Updates ***
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://apt.grafana.com stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
W: Failed to fetch https://apt.grafana.com/dists/stable/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
W: Some index files failed to download. They have been ignored, or old ones used instead.
Hit:1 http://security.debian.org bullseye-security InRelease
Hit:2 http://ftp.debian.org/debian bullseye InRelease
Hit:3 http://ftp.debian.org/debian bullseye-updates InRelease
Get:4 https://apt.grafana.com stable InRelease [7660 B]
Hit:5 https://repos.influxdata.com/debian stable InRelease
Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease
Err:4 https://apt.grafana.com stable InRelease
The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
Reading package lists...
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://apt.grafana.com stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
W: Failed to fetch https://apt.grafana.com/dists/stable/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
W: Some index files failed to download. They have been ignored, or old ones used instead.
Pending Updates: 0
*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name
tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN 104 10119 108/systemd-resolve
tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1001 36181 2690/io.jarvis.0
tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 12001 338/iobroker.js-con
tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 12045 338/iobroker.js-con
tcp 0 0 0.0.0.0:5355 0.0.0.0:* LISTEN 104 10113 108/systemd-resolve
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 13384 331/master
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 9946 1/init
tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 21904 1099/io.sonoff.0
tcp6 0 0 ::1:25 :::* LISTEN 0 13385 331/master
tcp6 0 0 :::8084 :::* LISTEN 1001 40604 3068/io.socketio.0
tcp6 0 0 :::8087 :::* LISTEN 1001 40263 3023/io.simple-api.
tcp6 0 0 :::8086 :::* LISTEN 998 13501 130/influxd
tcp6 0 0 :::8081 :::* LISTEN 1001 12134 366/io.admin.0
tcp6 0 0 :::8082 :::* LISTEN 1001 29723 1870/io.web.0
tcp6 0 0 :::5355 :::* LISTEN 104 10116 108/systemd-resolve
tcp6 0 0 :::3000 :::* LISTEN 109 12877 337/grafana
tcp6 0 0 :::22 :::* LISTEN 0 12698 1/init
tcp6 0 0 :::111 :::* LISTEN 0 9948 1/init
udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 46191 3316/io.upnp.0
udp 0 0 0.0.0.0:36578 0.0.0.0:* 1001 15630 447/io.javascript.0
udp 0 0 0.0.0.0:5355 0.0.0.0:* 104 10112 108/systemd-resolve
udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 23598 1084/io.shelly.0
udp 0 0 0.0.0.0:40470 0.0.0.0:* 1001 41914 3316/io.upnp.0
udp 0 0 127.0.0.53:53 0.0.0.0:* 104 10118 108/systemd-resolve
udp 0 0 0.0.0.0:67 0.0.0.0:* 1001 19601 757/io.radar2.0
udp 0 0 0.0.0.0:111 0.0.0.0:* 0 9947 1/init
udp6 0 0 :::5355 :::* 104 10115 108/systemd-resolve
udp6 0 0 :::111 :::* 0 9949 1/init
*** Log File - Last 25 Lines ***
2025-02-09 22:39:48.613 - debug: zigbee.0 (91228) Failed to execute LQI for '0x84fd27fffe07afcc'. "Error: AREQ - ZDO - mgmtLqiRsp after 10000ms\n at Object.start (/opt/iobroker/node_modules/zigbee-herdsman/dist/utils/waitress.js:40:23)\n at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:328:47\n at process.processTicksAndRejections (node:internal/process/task_queues:95:5)\n at async Queue.execute (/opt/iobroker/node_modules/zigbee-herdsman/dist/utils/queue.js:28:20)\n at async ZStackAdapter.sendZdo (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:256:16)\n at async request (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:957:30)\n at async Device.lqi (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:973:42)\n at async ZigbeeController.getMap (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:728:30)"
2025-02-09 22:39:48.613 - debug: zigbee.0 (91228) LQI succeeded for '0x84fd27fffe07afcc'
2025-02-09 22:39:49.211 - silly: zigbee.0 (91228) States user redis pmessage zigbee.0.*/zigbee.0.info.pairingCountdown:{"val":4662,"ack":true,"ts":1739137189210,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1739137189210}
2025-02-09 22:39:49.293 - silly: zigbee.0 (91228) States user redis pmessage zigbee.0.*/zigbee.0.info.pairingMessage:{"val":"Pairing time left: 4662","ack":true,"ts":1739137189291,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1739137189291}
2025-02-09 22:39:50.055 - error: fahrplan.0 (2157) Unknown Station defined in Route #0
2025-02-09 22:39:50.141 - error: fahrplan.0 (2157) Error occured: HAFAS error in Station in fStation/verifyStation [Error: Service Temporarily Unavailable]
2025-02-09 22:39:50.142 - error: fahrplan.0 (2157) Unknown Station defined in Route #1
2025-02-09 22:39:50.157 - error: fahrplan.0 (2157) Error occured: HAFAS error in Station in fStation/verifyStation [Error: Service Temporarily Unavailable]
2025-02-09 22:39:50.157 - error: fahrplan.0 (2157) Unknown Station defined in Departure Timetable #0
2025-02-09 22:39:50.173 - error: fahrplan.0 (2157) Error occured: HAFAS error in Station in fStation/verifyStation [Error: Service Temporarily Unavailable]
2025-02-09 22:39:50.173 - error: fahrplan.0 (2157) Unknown Station defined in Departure Timetable #1
2025-02-09 22:39:50.188 - error: fahrplan.0 (2157) Error occured: HAFAS error in Station in fStation/verifyStation [Error: Service Temporarily Unavailable]
2025-02-09 22:39:50.188 - error: fahrplan.0 (2157) Unknown Station defined in Departure Timetable #2
2025-02-09 22:39:50.203 - error: fahrplan.0 (2157) Error occured: HAFAS error in Station in fStation/verifyStation [Error: Service Temporarily Unavailable]
2025-02-09 22:39:50.203 - error: fahrplan.0 (2157) Unknown Station defined in Departure Timetable #3
2025-02-09 22:39:50.562 - silly: zigbee.0 (91228) States user redis pmessage zigbee.0.*/zigbee.0.info.pairingCountdown:{"val":4661,"ack":true,"ts":1739137190547,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1739137190547}
2025-02-09 22:39:50.630 - silly: zigbee.0 (91228) States user redis pmessage zigbee.0.*/zigbee.0.info.pairingMessage:{"val":"Pairing time left: 4661","ack":true,"ts":1739137190629,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1739137190629}
2025-02-09 22:39:51.213 - silly: zigbee.0 (91228) States user redis pmessage zigbee.0.*/zigbee.0.info.pairingCountdown:{"val":4660,"ack":true,"ts":1739137191212,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1739137191212}
2025-02-09 22:39:51.295 - silly: zigbee.0 (91228) States user redis pmessage zigbee.0.*/zigbee.0.info.pairingMessage:{"val":"Pairing time left: 4660","ack":true,"ts":1739137191293,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1739137191293}
2025-02-09 22:39:52.213 - silly: zigbee.0 (91228) States user redis pmessage zigbee.0.*/zigbee.0.info.pairingCountdown:{"val":4659,"ack":true,"ts":1739137192212,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1739137192212}
2025-02-09 22:39:52.295 - silly: zigbee.0 (91228) States user redis pmessage zigbee.0.*/zigbee.0.info.pairingMessage:{"val":"Pairing time left: 4659","ack":true,"ts":1739137192294,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1739137192294}
2025-02-09 22:39:53.253 - silly: zigbee.0 (91228) States user redis pmessage zigbee.0.*/zigbee.0.info.pairingCountdown:{"val":4658,"ack":true,"ts":1739137193252,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1739137193252}
2025-02-09 22:39:53.254 - silly: zigbee.0 (91228) States user redis pmessage zigbee.0.*/zigbee.0.info.pairingMessage:{"val":"Pairing time left: 4658","ack":true,"ts":1739137193253,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1739137193253}
2025-02-09 22:39:54.214 - silly: zigbee.0 (91228) States user redis pmessage zigbee.0.*/zigbee.0.info.pairingCountdown:{"val":4657,"ack":true,"ts":1739137194213,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1739137194213}
2025-02-09 22:39:54.295 - silly: zigbee.0 (91228) States user redis pmessage zigbee.0.*/zigbee.0.info.pairingMessage:{"val":"Pairing time left: 4657","ack":true,"ts":1739137194294,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1739137194294}
Ich danke Euch im Voraus!
Phil
Ja, genau. Wobei ich zur Analyse den Slave schonmal temporär offline genommen habe.
Eventuell habe ich den Übeltäter gefunden: Läuft kein 3D-Druck, zieht der OctoPrint-Adapter gerne mal >1.000 MB RAM. Das ist äußerst auffällig. Im Expertenmodus habe ich die RAM-Grenze eingestellt, diese wird jedoch einfach ignoriert. Habt ihr eine Idee, wie ich das Deckeln kann? Im Sinne "Force Adapter Restart, if RAM > x MB"?
