@apollon77 sagte in js-controller 4.0.x jetzt für alle User im STABLE!:
@feinfinger Effektiv wie in https://forum.iobroker.net/topic/22867/how-to-node-js-für-iobroker-richtig-updaten bei "d) Reset aller Module in node_modules" beschrieben. Halt beim js-controller mit der neuen Versionsnummer
Hat alles geklappt. Ich danke dir 
Prinzipiell ganz einfach, habe diesen Ultraschallsensor
JSN-SR04T an einen Sonoff Basic angeschlossen, dann liefert er out of the Box den Abstand zur Wasseroberfläche im Sekundentakt.
Der Rest ist Mathematik, sprich in meinem Falle ein Zylinder, dessen Höhe variabel ist.
Danke für die Berechnung, aber wie komme ich denn an die Daten aus der History?
@joergh Danke für die Info.
Habs jetzt allerdings auf dem FireTab auch hinbekommen, lag an der Webview Version.
Hallo zusammen,
Ich habe mir eine Regensensor gebaut, und möchte nun die Werte in einen Datenpunkt schreiben.
Soweit funktioniert der Sensor zuverlässig und meldet mir folgenden Status:
Wenn es regnet, liegt die Spannung bei 0 Volt, wenn er trocken ist, liefert er 10,6 Volt.
Mein Datenpunkt lautet "rain" und soll entweder "True" oder "false" sein.
Das ist mein dazugehöriges Blockly.
var timeout;
on({ id: 'shelly.0.SHUNI-1#C8C9A31B3CCD#1.ADC.Power' /* Power Measurement */, change: 'ne' }, async (obj) => {
let value = obj.state.val;
let oldValue = obj.oldState.val;
if ((obj.state ? obj.state.val : '') < 5) {
(() => { if (timeout) { clearTimeout(timeout); timeout = null; }})();
setState('0_userdata.0.Regensensor.rain' /* rain */, true, true);
} else {
timeout = setTimeout(async () => {
timeout = null;
setState('0_userdata.0.Regensensor.rain' /* rain */, false, true);
}, 1800000);
}
});
Die Verzögerung soll dazu dienen, das er nicht direkt wieder auf "false" springt, wenn der Regen mal für ein paar Minuten unterbrochen ist.
Das Problem ist, das wenn der Sensor abgetrocknet ist und innerhalb der 30 Min neuer Regen beginnt, meldet das Blockly trotzdem "false" nach 30 Minuten.
Wo liegt mein Fehler?
@thomas-braun said in warn Meldungen vom host.ioBroker:
npm ls syno
smarthome@ioBroker:/opt/iobroker$ npm ls syno
npm ERR! code ELSPROBLEMS
npm ERR! invalid: syno@3.0.0 /opt/iobroker/node_modules/syno
iobroker.inst@2.0.3 /opt/iobroker
`-- iobroker.synology@3.0.1
`-- syno@3.0.0 invalid: "git+https://git@github.com/MeisterTR/syno.git" from node_modules/iobroker.synology
npm ERR! invalid: xmlbuilder@0.4.2 /opt/iobroker/node_modules/xmlbuilder
iobroker.inst@2.0.3 /opt/iobroker
+-- iobroker.hm-rpc@1.16.0
| `-- homematic-xmlrpc@1.0.2
| `-- xmlbuilder@0.4.2 invalid: "https://github.com/hobbyquaker/xmlbuilder-js/tarball/29fe5030dc6852007dc8d1bfd5109d75f8da58d5" from node_modules/homematic-xmlrpc
+-- iobroker.radar2@2.1.0
| +-- node-ble@1.10.0
| | `-- dbus-next@0.10.2
| | `-- xml2js@0.4.23
| | `-- xmlbuilder@11.0.1
| `-- xml2js@0.6.2
| `-- xmlbuilder@11.0.1
+-- iobroker.shelly@6.8.0
| `-- xmlbuilder@15.1.1
`-- iobroker.yahka@1.0.3
`-- hap-nodejs@0.11.2
`-- @homebridge/dbus-native@0.5.1
`-- xml2js@0.5.0
`-- xmlbuilder@11.0.1
Danke!
Jetzt hab ich nur noch diese Err im iob diag stehen.
Kann man da auch was machen?
Errors in npm tree:
npm ERR! code ELSPROBLEMS
npm ERR! invalid: syno@3.0.0 /opt/iobroker/node_modules/syno
npm ERR! invalid: xmlbuilder@0.4.2 /opt/iobroker/node_modules/xmlbuilder
npm ERR! A complete log of this run can be found in: /home/smarthome/.npm/_logs/2024-04-10T13_11_42_350Z-debug-0.log
@thomas-braun
Erledigt!
iob diag
======== Start marking the full check here =========
Skript v.2023-10-10
*** BASE SYSTEM ***
Static hostname: ioBroker
Icon name: computer-container
Chassis: container
Virtualization: lxc
Operating System: Ubuntu 20.04.6 LTS
Kernel: Linux 5.15.116-1-pve
Architecture: x86-64
model name : 13th Gen Intel(R) Core(TM) i5-1340P
Docker : false
Virtualization : lxc
Kernel : x86_64
Userland : amd64
Systemuptime and Load:
14:30:46 up 2 min, 1 user, load average: 0.38, 0.52, 0.61
CPU threads: 4
*** Time and Time Zones ***
Local time: Wed 2024-04-10 14:30:47 CEST
Universal time: Wed 2024-04-10 12:30:47 UTC
RTC time: n/a
Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
NTP service: inactive
RTC in local TZ: no
*** User and Groups ***
smarthome
/home/smarthome
smarthome sudo iobroker
*** X-Server-Setup ***
X-Server: false
Desktop:
Terminal: tty
Boot Target: graphical.target
*** MEMORY ***
total used free shared buff/cache available
Mem: 8.2G 1.5G 6.1G 0.0K 638M 6.7G
Swap: 0B 0B 0B
Total: 8.2G 1.5G 6.1G
8192 M total memory
1468 M used memory
231 M active memory
1681 M inactive memory
6084 M free memory
0 M buffer memory
638 M swap cache
0 M total swap
0 M used swap
0 M free swap
*** FAILED SERVICES ***
UNIT LOAD ACTIVE SUB DESCRIPTION
* run-rpc_pipefs.mount loaded failed failed RPC Pipe File System
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
1 loaded units listed.
*** FILESYSTEM ***
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/pve-vm--114--disk--0 ext4 15G 11G 3.3G 77% /
none tmpfs 492K 4.0K 488K 1% /dev
udev devtmpfs 16G 0 16G 0% /dev/tty
tmpfs tmpfs 16G 0 16G 0% /dev/shm
tmpfs tmpfs 3.1G 140K 3.1G 1% /run
tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs tmpfs 3.1G 0 3.1G 0% /run/user/1001
Messages concerning ext4 filesystem in dmesg:
dmesg: read kernel buffer failed: Operation not permitted
Show mounted filesystems \(real ones only\):
TARGET SOURCE FSTYPE OPTIONS
/ /dev/mapper/pve-vm--114--disk--0 ext4 rw,relatime,stripe=16
|-/proc/cpuinfo lxcfs[/proc/cpuinfo] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
|-/proc/diskstats lxcfs[/proc/diskstats] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
|-/proc/loadavg lxcfs[/proc/loadavg] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
|-/proc/meminfo lxcfs[/proc/meminfo] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
|-/proc/slabinfo lxcfs[/proc/slabinfo] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
|-/proc/stat lxcfs[/proc/stat] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
|-/proc/swaps lxcfs[/proc/swaps] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
|-/proc/uptime lxcfs[/proc/uptime] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
`-/sys/devices/system/cpu lxcfs[/sys/devices/system/cpu] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
Files in neuralgic directories:
/var:
2.5G /var/
1.6G /var/log/journal/db91a8d9813048b3b0d9627361bf92a2
1.6G /var/log/journal
1.6G /var/log
580M /var/cache
Hint: You are currently not seeing messages from other users and the system.
Users in groups 'adm', 'systemd-journal' can see all messages.
Pass -q to turn off this notice.
Archived and active journals take up 8.0M in the file system.
/opt/iobroker/backups:
342M /opt/iobroker/backups/
/opt/iobroker/iobroker-data:
709M /opt/iobroker/iobroker-data/
422M /opt/iobroker/iobroker-data/files
211M /opt/iobroker/iobroker-data/backup-objects
146M /opt/iobroker/iobroker-data/files/vis-2
81M /opt/iobroker/iobroker-data/files/vis-2/static
The five largest files in iobroker-data are:
33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map
27M /opt/iobroker/iobroker-data/objects.jsonl
22M /opt/iobroker/iobroker-data/objects.json.migrated
22M /opt/iobroker/iobroker-data/objects.json.bak.migrated
22M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.c05ba1d3.js.map
USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':
find: '/dev/serial/by-id/': No such file or directory
*** NodeJS-Installation ***
/usr/bin/nodejs v18.20.1
/usr/bin/node v18.20.1
/usr/bin/npm 10.5.0
/usr/bin/npx 10.5.0
/usr/bin/corepack 0.25.2
nodejs:
Installed: 18.20.1-1nodesource1
Candidate: 18.20.1-1nodesource1
Version table:
*** 18.20.1-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
100 /var/lib/dpkg/status
18.20.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.19.1-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.19.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.18.2-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.18.1-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.18.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.17.1-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.17.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.16.1-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.16.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.15.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.14.2-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.14.1-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.14.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.13.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.12.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.11.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.10.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.9.1-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.9.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.8.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.7.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.6.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.5.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.4.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.3.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.2.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.1.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.0.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
10.19.0~dfsg-3ubuntu1.5 500
500 http://archive.ubuntu.com/ubuntu focal-updates/universe amd64 Packages
500 http://archive.ubuntu.com/ubuntu focal-security/universe amd64 Packages
10.19.0~dfsg-3ubuntu1 500
500 http://archive.ubuntu.com/ubuntu focal/universe amd64 Packages
Temp directories causing npm8 problem: 0
No problems detected
Errors in npm tree:
npm ERR! code ELSPROBLEMS
npm ERR! invalid: iobroker.influxdb@4.0.2 /opt/iobroker/node_modules/iobroker.influxdb
npm ERR! invalid: iobroker.radar2@2.1.0 /opt/iobroker/node_modules/iobroker.radar2
npm ERR! invalid: iobroker.shelly@6.9.0 /opt/iobroker/node_modules/iobroker.shelly
npm ERR! invalid: syno@3.0.0 /opt/iobroker/node_modules/syno
npm ERR! invalid: xmlbuilder@0.4.2 /opt/iobroker/node_modules/xmlbuilder
npm ERR! A complete log of this run can be found in: /home/smarthome/.npm/_logs/2024-04-10T12_30_48_108Z-debug-0.log
*** ioBroker-Installation ***
ioBroker Status
iobroker is running on this host.
Objects type: jsonl
States type: jsonl
Core adapters versions
js-controller: 5.0.19
admin: 6.13.16
javascript: 7.8.0
npm ERR! code ELSPROBLEMS
npm ERR! invalid: iobroker.influxdb@4.0.2 /opt/iobroker/node_modules/iobroker.influxdb
npm ERR! invalid: iobroker.radar2@2.1.0 /opt/iobroker/node_modules/iobroker.radar2
npm ERR! invalid: iobroker.shelly@6.9.0 /opt/iobroker/node_modules/iobroker.shelly
npm ERR! A complete log of this run can be found in: /home/smarthome/.npm/_logs/2024-04-10T12_30_54_122Z-debug-0.log
Adapters from github: 3
Adapter State
+ system.adapter.admin.0 : admin : ioBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin
system.adapter.alarm.0 : alarm : ioBroker - enabled
+ system.adapter.alexa2.0 : alexa2 : ioBroker - enabled
system.adapter.alias-manager.0 : alias-manager : ioBroker - enabled
+ system.adapter.backitup.0 : backitup : ioBroker - enabled
+ system.adapter.broadlink2.0 : broadlink2 : ioBroker - enabled
system.adapter.daswetter.0 : daswetter : ioBroker - enabled
system.adapter.discovery.0 : discovery : ioBroker - enabled
system.adapter.ems-esp.0 : ems-esp : ioBroker - enabled
+ system.adapter.fhem.0 : fhem : ioBroker - enabled, port: 7072
system.adapter.fullybrowser.0 : fullybrowser : ioBroker - enabled
+ system.adapter.hm-rpc.0 : hm-rpc : ioBroker - enabled, port: 0
+ system.adapter.hm-rpc.1 : hm-rpc : ioBroker - enabled, port: 0
system.adapter.icons-mfd-svg.0 : icons-mfd-svg : ioBroker - disabled
+ system.adapter.influxdb.0 : influxdb : ioBroker - enabled, port: 8086
system.adapter.info.0 : info : ioBroker - enabled
system.adapter.iot.0 : iot : ioBroker - enabled
+ system.adapter.javascript.0 : javascript : ioBroker - enabled
+ system.adapter.modbus.0 : modbus : ioBroker - enabled
+ system.adapter.modbus.1 : modbus : ioBroker - enabled
+ system.adapter.mqtt.0 : mqtt : ioBroker - enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.pushover.0 : pushover : ioBroker - enabled
system.adapter.radar2.0 : radar2 : ioBroker - enabled
+ system.adapter.shelly.0 : shelly : ioBroker - enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.sonoff.0 : sonoff : ioBroker - enabled, port: 1883, bind: 192.168.178.61
+ system.adapter.synology.0 : synology : ioBroker - enabled, port: 5001
system.adapter.telegram.0 : telegram : ioBroker - disabled, port: 8443, bind: 0.0.0.0
system.adapter.vis-2.0 : vis-2 : ioBroker - enabled
system.adapter.vis-hqwidgets.0 : vis-hqwidgets : ioBroker - disabled
system.adapter.vis-icontwo.0 : vis-icontwo : ioBroker - enabled
system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : ioBroker - disabled
system.adapter.vis-plumb.0 : vis-plumb : ioBroker - disabled
system.adapter.vis.0 : vis : ioBroker - enabled
system.adapter.web.0 : web : ioBroker - enabled, port: 8082, bind: 192.168.178.61, run as: admin
system.adapter.yahka.0 : yahka : ioBroker - enabled
+ instance is alive
Enabled adapters with bindings
+ system.adapter.admin.0 : admin : ioBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.fhem.0 : fhem : ioBroker - enabled, port: 7072
+ system.adapter.hm-rpc.0 : hm-rpc : ioBroker - enabled, port: 0
+ system.adapter.hm-rpc.1 : hm-rpc : ioBroker - enabled, port: 0
+ system.adapter.influxdb.0 : influxdb : ioBroker - enabled, port: 8086
+ system.adapter.mqtt.0 : mqtt : ioBroker - enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.shelly.0 : shelly : ioBroker - enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.sonoff.0 : sonoff : ioBroker - enabled, port: 1883, bind: 192.168.178.61
+ system.adapter.synology.0 : synology : ioBroker - enabled, port: 5001
system.adapter.web.0 : web : ioBroker - enabled, port: 8082, bind: 192.168.178.61, run as: admin
ioBroker-Repositories
stable : http://download.iobroker.net/sources-dist.json
beta : http://download.iobroker.net/sources-dist-latest.json
Active repo(s): stable
Installed ioBroker-Instances
Used repository: stable
Adapter "admin" : 6.13.16 , installed 6.13.16
Adapter "alarm" : 3.6.0 , installed 3.6.0
Adapter "alexa2" : 3.26.4 , installed 3.26.4
Adapter "alias-manager": 1.2.6 , installed 1.2.6
Adapter "backitup" : 2.10.11 , installed 2.10.11
Adapter "broadlink2" : 2.1.5 , installed 2.2.0
Adapter "daswetter" : 3.1.13 , installed 3.1.13
Adapter "discovery" : 4.4.0 , installed 4.4.0
Adapter "ems-esp" : 3.0.3 , installed 3.0.3
Adapter "fhem" : 2.0.5 , installed 2.0.5
Adapter "fullybrowser" : 3.0.11 , installed 3.0.11
Adapter "hm-rpc" : 1.16.0 , installed 1.16.0
Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0
Adapter "influxdb" : 4.0.2 , installed 4.0.2
Adapter "iot" : 2.0.11 , installed 2.0.11
Adapter "javascript" : 7.8.0 , installed 7.8.0
Controller "js-controller": 5.0.19 , installed 5.0.19
Adapter "modbus" : 6.1.0 , installed 6.1.0
Adapter "mqtt" : 5.2.0 , installed 5.2.0
Adapter "netatmo" : 3.1.0 , installed 3.1.0
Adapter "pushover" : 3.0.6 , installed 3.0.6
Adapter "radar2" : 2.1.0 , installed 2.1.0
Adapter "shelly" : 6.8.0 , installed 6.9.0
Adapter "simple-api" : 2.7.2 , installed 2.7.2
Adapter "socketio" : 6.6.1 , installed 6.6.1
Adapter "sonoff" : 3.0.3 , installed 3.0.3
Adapter "synology" : 3.0.1 , installed 3.0.1
Adapter "telegram" : 3.1.0 , installed 3.1.0
Adapter "vis" : 1.5.4 , installed 1.5.4
Adapter "vis-2" : 2.9.32 , installed 2.9.32
Adapter "vis-hqwidgets": 1.4.0 , installed 1.5.1
Adapter "vis-icontwo" : 1.5.0 , installed 1.5.0
Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.1.1
Adapter "vis-plumb" : 1.0.2 , installed 1.0.2
Adapter "web" : 6.2.3 , installed 6.2.3
Adapter "wled" : 0.7.2 , installed 0.7.2
Adapter "ws" : 2.5.11 , installed 2.5.11
Adapter "yahka" : 1.0.3 , installed 1.0.3
Objects and States
Please stand by - This may take a while
Objects: 15124
States: 13191
*** OS-Repositories and Updates ***
Hit:1 https://deb.nodesource.com/node_18.x nodistro InRelease
Hit:2 http://archive.ubuntu.com/ubuntu focal InRelease
Hit:3 http://archive.ubuntu.com/ubuntu focal-updates InRelease
Hit:4 http://archive.ubuntu.com/ubuntu focal-security InRelease
Reading package lists...
Pending Updates: 0
*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name
tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN 102 817274674 107/systemd-resolve
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 817275054 308/master
tcp 0 0 192.168.178.61:42010 0.0.0.0:* LISTEN 1000 817295400 1683/io.hm-rpc.0
tcp 0 0 192.168.178.61:42001 0.0.0.0:* LISTEN 1000 817295916 1798/io.hm-rpc.1
tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1000 817233807 1668/io.shelly.0
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 817244082 1/init
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 817272680 166/sshd: /usr/sbin
tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1000 817292791 1518/iobroker.js-co
tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1000 817233717 1518/iobroker.js-co
tcp 0 0 192.168.178.61:1883 0.0.0.0:* LISTEN 1000 817294795 1783/io.sonoff.0
tcp6 0 0 :::8081 :::* LISTEN 1000 817292170 1536/io.admin.0
tcp6 0 0 :::3000 :::* LISTEN 1000 817294253 2082/io.fullybrowse
tcp6 0 0 ::1:25 :::* LISTEN 0 817275055 308/master
tcp6 0 0 :::111 :::* LISTEN 0 817244084 1/init
tcp6 0 0 :::22 :::* LISTEN 0 817272682 166/sshd: /usr/sbin
udp 0 0 0.0.0.0:44107 0.0.0.0:* 108 817265403 99/avahi-daemon: ru
udp 0 0 0.0.0.0:15001 0.0.0.0:* 1000 817296033 1967/io.broadlink2.
udp 0 0 127.0.0.53:53 0.0.0.0:* 102 817274673 107/systemd-resolve
udp 0 0 0.0.0.0:111 0.0.0.0:* 0 817244083 1/init
udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 817265401 99/avahi-daemon: ru
udp 0 0 0.0.0.0:56355 0.0.0.0:* 1000 817300621 1967/io.broadlink2.
udp6 0 0 :::45422 :::* 108 817265404 99/avahi-daemon: ru
udp6 0 0 :::111 :::* 0 817244085 1/init
udp6 0 0 :::5353 :::* 108 817265402 99/avahi-daemon: ru
*** Log File - Last 25 Lines ***
2024-04-10 14:30:17.108 - warn: fhem.0 (1638) CHECK id: fhem.0.info.Info.numberObjectsIOBoutSub
2024-04-10 14:30:17.108 - warn: fhem.0 (1638) CHECK id: fhem.0.info.Info.roomioBroker
2024-04-10 14:30:17.152 - warn: fhem.0 (1638) > more info FHEM Adapter visit https://github.com/iobroker-community-adapters/ioBroker.fhem/blob/master/docs/de/README.md
2024-04-10 14:30:27.099 - info: hm-rpc.0 (1683) starting. Version 1.16.0 in /opt/iobroker/node_modules/iobroker.hm-rpc, node: v18.20.1, js-controller: 5.0.19
2024-04-10 14:30:27.182 - info: hm-rpc.0 (1683) xmlrpc server is trying to listen on 192.168.178.61:42010
2024-04-10 14:30:27.182 - info: hm-rpc.0 (1683) xmlrpc client is trying to connect to 192.168.178.109:42010/ with ["http://192.168.178.61:42010","ioBroker:hm-rpc.0:7dfbe67847d41dc6143bcd6c90f5d276"]
2024-04-10 14:30:31.087 - info: modbus.0 (1698) starting. Version 6.1.0 in /opt/iobroker/node_modules/iobroker.modbus, node: v18.20.1, js-controller: 5.0.19
2024-04-10 14:30:31.218 - info: modbus.0 (1698) Connected to slave 192.168.178.78
2024-04-10 14:30:33.272 - warn: host.ioBroker No configuration found for scope "shelly" and category "deviceUpdates"
2024-04-10 14:30:35.159 - info: synology.0 (1734) starting. Version 3.0.1 in /opt/iobroker/node_modules/iobroker.synology, node: v18.20.1, js-controller: 5.0.19
2024-04-10 14:30:35.166 - info: synology.0 (1734) Connecting to Synology 192.168.178.5:5001
2024-04-10 14:30:36.225 - info: synology.0 (1734) DSM 7
2024-04-10 14:30:36.225 - info: synology.0 (1734) DSM 7 detected, set all to true
2024-04-10 14:30:39.077 - info: modbus.1 (1768) starting. Version 6.1.0 in /opt/iobroker/node_modules/iobroker.modbus, node: v18.20.1, js-controller: 5.0.19
2024-04-10 14:30:39.219 - info: modbus.1 (1768) Connected to slave 192.168.178.164
2024-04-10 14:30:47.104 - info: hm-rpc.1 (1798) starting. Version 1.16.0 in /opt/iobroker/node_modules/iobroker.hm-rpc, node: v18.20.1, js-controller: 5.0.19
2024-04-10 14:30:47.190 - info: hm-rpc.1 (1798) xmlrpc server is trying to listen on 192.168.178.61:42001
2024-04-10 14:30:47.190 - info: hm-rpc.1 (1798) xmlrpc client is trying to connect to 192.168.178.109:42001/ with ["http://192.168.178.61:42001","ioBroker:hm-rpc.1:394d5d320b0e7f0c3b6d4c12dec9b96e"]
2024-04-10 14:30:57.210 - info: hm-rpc.0 (1683) Connected
2024-04-10 14:30:57.213 - info: hm-rpc.0 (1683) xmlrpc <- listDevices ["ioBroker:hm-rpc.0:7dfbe67847d41dc6143bcd6c90f5d276"]
2024-04-10 14:30:57.225 - info: hm-rpc.0 (1683) xmlrpc -> 0 devices
2024-04-10 14:30:57.280 - info: hm-rpc.0 (1683) xmlrpc <- newDevices 69
2024-04-10 14:30:57.290 - info: hm-rpc.0 (1683) new HMIP devices/channels after filter: 0
2024-04-10 14:30:57.293 - warn: broadlink2.0 (1967) device RM:RMPROPLUS-5a-64-fa not found, please rescan later again or delete it! It was: 192.168.178.63,80,10141,智能遥控,0,[object Object],78:0f:77:5a:64:fa,RMP,RM:RMPROPLUS-5a-64-fa,0x279d,RM3 Pro Plus,RMPROPLUS-5a-64-fa,RM:RMPROPLUS-5a-64-fa,52
2024-04-10 14:30:59.078 - info: discovery.0 (2043) starting. Version 4.4.0 in /opt/iobroker/node_modules/iobroker.discovery, node: v18.20.1, js-controller: 5.0.19
============ Mark until here for C&P =============
Das mag gut sein, wird aber mein Problem nicht lösen.
Ich denke nicht das es was mit dem User zu tun hat, da es wie gesagt nicht das erste Update ist was ich so mache und die Installation ist schon ein paar Jahre in Betrieb.
iob diag kann ich nicht ausführen, da es bei mir als root läuft. (ja, ich weiß, nicht gerne gesehen)
Ist aber auch nicht das erste Mal das ich update, der Weg war wie folgt:
sudo apt update
sudo apt upgrade
iobroker start
Mehr hab ich nicht gemacht.
iob nodejs-update
Ergibt:
ioBroker nodejs updater 2023-10-13
Recommended nodejs-version is: 18.20.1
Checking your installation now. Please be patient!
Your current setup is:
/usr/bin/nodejs v18.20.1
/usr/bin/node v18.20.1
/usr/bin/npm 10.5.0
/usr/bin/npx 10.5.0
/usr/bin/corepack 0.25.2
We found these nodejs versions available for installation:
nodejs:
Installed: 18.20.1-1nodesource1
Candidate: 18.20.1-1nodesource1
Version table:
*** 18.20.1-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
100 /var/lib/dpkg/status
18.20.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.19.1-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.19.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.18.2-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.18.1-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.18.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.17.1-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.17.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.16.1-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.16.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.15.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.14.2-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.14.1-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.14.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.13.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.12.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.11.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.10.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.9.1-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.9.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.8.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.7.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.6.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.5.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.4.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.3.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.2.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.1.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
18.0.0-1nodesource1 500
500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
10.19.0~dfsg-3ubuntu1.5 500
500 http://archive.ubuntu.com/ubuntu focal-updates/universe amd64 Packages
500 http://archive.ubuntu.com/ubuntu focal-security/universe amd64 Packages
10.19.0~dfsg-3ubuntu1 500
500 http://archive.ubuntu.com/ubuntu focal/universe amd64 Packages
Nothing to do - Your installation is using the correct paths.
Nothing to do - Your version is the recommended one.
You can now keep your whole system up-to-date using the usual 'sudo apt update && sudo apt full-upgrade' commands.
Please DO NOT USE node version managers like 'nvm', 'n' and others in parallel. They will break your current installation!
Hallo zusammen,
Ich habe heute meine Node und NPM Versionen auf den aktuellen Stand gebracht.
Seitdem bekomme ich alle 15 Min diese Meldunmgen im Log.
Hat da jemand nen Lösungsansatz für mich?
host.ioBroker
2024-04-10 13:01:24.227 warn No configuration found for scope "shelly" and category "deviceUpdates"
host.ioBroker
2024-04-10 12:46:24.212 warn No configuration found for scope "shelly" and category "deviceUpdates"
host.ioBroker
2024-04-10 12:31:24.197 warn No configuration found for scope "shelly" and category "deviceUpdates"
host.ioBroker
2024-04-10 12:16:23.945 warn No configuration found for scope "shelly" and category "deviceUpdates"
host.ioBroker
2024-04-10 12:01:23.792 warn No configuration found for scope "shelly" and category "deviceUpdates"
host.ioBroker
2024-04-10 11:46:23.780 warn No configuration found for scope "shelly" and category "deviceUpdates"
host.ioBroker
2024-04-10 11:31:23.769 warn No configuration found for scope "shelly" and category "deviceUpdates"
host.ioBroker
2024-04-10 11:16:23.756 warn No configuration found for scope "shelly" and category "deviceUpdates"
host.ioBroker
2024-04-10 11:01:23.746 warn No configuration found for scope "shelly" and category "deviceUpdates"
host.ioBroker
2024-04-10 10:46:23.735 warn No configuration found for scope "shelly" and category "deviceUpdates"
