@mcm1957

Ich habe jetzt einmal ein neues Passwort im Adapter gesetzt und diesen neu gestartet. Daraufhin sind natürlich alle Anmeldeversuche aller Shelly fehlgeschlagen. Das neue Passwort habe ich dann in einem der beiden Problem-Shellys eingegeben, diesen neu gestartet und... er hat sich verbunden Dann habe ich das Passwort wieder in das alte, sichere, geändert und jetzt verbindet sich damit auch der Problem-Shelly

Auch wenn ich den Lösungsweg nicht nachvollziehen kann: Problem gelöst Danke für euer Mithilfe, ich hatte hier wirklich schon sehr viel ausprobiert.

@mcm1957 und @Samson71 und @Fabio
Danke für eure schnelle Rückmeldung. Ich hatte ursprünglich auf einen alten Thread antworten wollen, daher wohl die falsche Überschrift. Es geht um meine beiden Shelly 2pm Plus. Ich habe die Passwörter mehrfach neu eingegeben, auch nach einem Factory Reset. Manuell geschrieben aber auch per copy and paste. Eigentlich kann es daran nicht liegen.

Der Log nach einem Neustart des Shelly Adapters sieht wie folgt aus:

shelly.1
2025-10-27 17:34:59.584	info	[MQTT] Client Close: (shellyplus2pm / shellyplus2pm-80646fcfcbfc / shellyplus2pm#80646fcfcbfc#1) (false)

shelly.1
2025-10-27 17:34:59.564	error	[MQTT] Wrong MQTT authentication of client "shellyplus2pm-80646fcfcbfc": Incorrect password

javascript.0
2025-10-27 17:34:55.342	info	script.js.Beleuchtung.Hue_Push: {"owner":{"rid":"0e4af229-1184-4524-9397-8def4f2c3c01","rtype":"device"},"temperature":{"temperature":9.43,"temperature_report":{"changed":"2025-10-27T16:34:55.291Z","temperature":9.43}}}

javascript.0
2025-10-27 17:34:55.342	info	script.js.Beleuchtung.Hue_Push: missing update instructions for sensors.temperature.temperature_report

shelly.1
2025-10-27 17:34:17.523	info	[MQTT] Client Close: (shellyplus2pm / shellyplus2pm-08b61fcca0e0 / shellyplus2pm#08b61fcca0e0#1) (false)

shelly.1
2025-10-27 17:34:17.499	error	[MQTT] Wrong MQTT authentication of client "shellyplus2pm-08b61fcca0e0": Incorrect password

shelly.1
2025-10-27 17:34:04.558	info	[MQTT] Client Close: (shellyplus2pm / shellyplus2pm-80646fcfcbfc / shellyplus2pm#80646fcfcbfc#1) (false)

shelly.1
2025-10-27 17:34:04.528	error	[MQTT] Wrong MQTT authentication of client "shellyplus2pm-80646fcfcbfc": Incorrect password

javascript.0
2025-10-27 17:33:51.114	info	script.js.Beleuchtung.Hue_Push: {"light":{"light_level":8013,"light_level_report":{"changed":"2025-10-27T16:33:51.065Z","light_level":8013}},"owner":{"rid":"ab48f2cb-9827-43ef-9fdd-137120bdd3f1","rtype":"device"}}

javascript.0
2025-10-27 17:33:51.114	info	script.js.Beleuchtung.Hue_Push: missing update instructions for sensors.light.light_level_report

shelly.1
2025-10-27 17:33:48.200	info	[MQTT] Device with client id "shellyplus2pm-a0a3b366b9f4" connected from 192.168.68.87!

shelly.1
2025-10-27 17:33:48.115	info	[MQTT] Device with client id "shellyplus2pm-e465b85fcd64" connected from 192.168.68.72!

shelly.1
2025-10-27 17:33:48.071	info	[MQTT] Device with client id "shellyplus2pm-e465b8945518" connected from 192.168.68.84!

shelly.1
2025-10-27 17:33:48.048	info	[MQTT] Device with client id "shelly2pmg3-8cbfea99d17c" connected from 192.168.68.57!

shelly.1
2025-10-27 17:33:47.986	info	[MQTT] Device with client id "shelly2pmg3-8cbfea997f2c" connected from 192.168.68.52!

shelly.1
2025-10-27 17:33:47.910	info	[MQTT] Device with client id "shellyplus2pm-d4d4da07eb08" connected from 192.168.68.62!

shelly.1
2025-10-27 17:33:47.782	info	[MQTT] Device with client id "shelly2pmg3-8cbfea993584" connected from 192.168.68.83!

shelly.1
2025-10-27 17:33:47.599	info	[MQTT] Device with client id "shelly2pmg3-8cbfea9d5e14" connected from 192.168.68.56!

shelly.1
2025-10-27 17:33:47.396	info	[MQTT] Device with client id "shellyplus2pm-e465b85fd654" connected from 192.168.68.68!

shelly.1
2025-10-27 17:33:45.607	info	Starting in MQTT mode. Listening on 0.0.0.0:1882 (QoS 0)

shelly.1
2025-10-27 17:33:45.482	info	starting. Version 10.2.0 in /opt/iobroker/node_modules/iobroker.shelly, node: v20.18.1, js-controller: 7.0.7

host.iobroker
2025-10-27 17:33:44.757	info	instance system.adapter.shelly.1 in version "10.2.0" started with pid 404562

host.iobroker
2025-10-27 17:33:41.540	info	instance system.adapter.shelly.1 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)

shelly.1
2025-10-27 17:33:41.482	info	terminating

host.iobroker
2025-10-27 17:33:41.020	info	stopInstance system.adapter.shelly.1 send kill signal

shelly.1
2025-10-27 17:33:40.981	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason

shelly.1
2025-10-27 17:33:40.981	info	terminating

shelly.1
2025-10-27 17:33:40.980	info	Got terminate signal TERMINATE_YOURSELF

Hallo zusammen,

ich habe bei mir viele Shellys im Betrieb, jedoch bekomme ich die zwei zuletzt eingebauten Shelly 2pm plus einfach nicht an MQTT angebunden. Ich bekomme immer wieder diese Meldung, obwohl ich schon mehrfach MQTT aktiviert und deaktiviert habe, das Passwort auch mal bewusst falsch eingetragen habe und auch ein Device resettet habe:

shelly.1
2025-10-22 06:06:37.330	info	[MQTT] Client Close: (shellyplus2pm / shellyplus2pm-80646fcfcbfc / shellyplus2pm#80646fcfcbfc#1) (false)

shelly.1
2025-10-22 06:06:37.309	error	[MQTT] Wrong MQTT authentication of client "shellyplus2pm-80646fcfcbfc": Incorrect password

Es wäre klasse, wenn hier jemand eine Idee hätte. Andere Shelly 2pm plus oder Shelly 2pm Gen 3 laufen ohne Problem mit MQTT.

MOD-Edit
Bitte Code-Tags </>benutzen!

@thomas-braun said in Zigbee Adapter 1.5.6 Fehler Syntax Error:

iobroker upgrade
Irgendwie ist bei mir der Wurm drin

opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpgrade.js:104
                        for (const dep of [...deps, ...globalDeps]) {
                                          ^

TypeError: [(...deps),(...globalDeps)] is not iterable
    at Upgrade.upgradeAdapterHelper (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpgrade.js:104:43)
    at /opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js:991:37
    at Immediate.<anonymous> (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js:2621:45)
    at processImmediate (internal/timers.js:463:21)

Doch nicht alles in Butter
Wenn ich jetzt Adapter aktualisieren möchte bekomme ich Fehlermeldungen wie:

$ ./iobroker upgrade cloud
Update cloud from @3.1.0 to @4.0.11
NPM version: 6.14.13npm install iobroker.cloud@4.0.11 --loglevel error --prefix "/opt/iobroker" (System call)

╭─────────────────────────────────────────────────────────╮│ ││ Manual installation of ioBroker is no longer supported ││ on Linux, OSX and FreeBSD! ││ Please refer to the documentation on how to install it! ││ https://github.com/ioBroker/ioBroker/wiki/Installation ││ │╰─────────────────────────────────────────────────────────╯
npm ERR! code ELIFECYCLE
npm ERR! errno 100
npm ERR! iobroker@2.0.3 postinstall: node lib/install.js
npm ERR! Exit status 100
npm ERR!
npm ERR! Failed at the iobroker@2.0.3 postinstall script.npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
npm ERR! A complete log of this run can be found in:npm ERR! /home/iobroker/.npm/_logs/2021-07-14T17_50_19_300Z-debug.log
ERROR: host.raspberrypi Cannot install iobroker.cloud@4.0.11: 100
ERROR: process exited with code 25

@crunchip

Nach einem Update des Zigbee Adapter hatte ich die gleichen Fehlermeldungen.
Habe dann folgendes ausgeführt

cd /opt/iobroker

npm install iobroker.zigbee@1.5.6
danach noch ein

iobroker fix

Danach musste ich noch Transportschlüssel und Pan ID anpassen (Meldung aus dem Log) Und alles läuft wieder

Ich hab genau das gleich Problem und jetzt den Befehl ausgeführt. Aber... was installiert er denn da alles (Nodemailer, ffmpeg, etc.)?? Es kamen auch mehrere Fehlermeldungen.

@miko20

Hi Miko!

Falls noch vorhanden würde ich einen Zigbee Stick mit 6db Antenne abkaufen. Dann kann ich unser neues Smarthome direkt vernünftig aufbauen und brauche meinen CC2531 gar nicht erst reaktivieren

Ich habe jetzt mal einfach nur -unsafe ausprobiert. Ergebnis aber wie vorher ohne diese Zusatz:

pi@ioBroker-RasPi:/opt/iobroker $ sudo npm install iobroker.js-controller unsafe

> iobroker.js-controller@1.5.14 preinstall /opt/iobroker/node_modules/iobroker.js-controller
> node lib/preinstallCheck.js

NPM version: 6.9.0
npm version >= 5: disabling package-lock

> serialport@4.0.7 install /opt/iobroker/node_modules/serialport
> node-pre-gyp install --fallback-to-build

node-pre-gyp info it worked if it ends with ok
node-pre-gyp verb cli [ '/usr/bin/node',
node-pre-gyp verb cli   '/opt/iobroker/node_modules/serialport/node_modules/.bin/node-pre-gyp',
node-pre-gyp verb cli   'install',
node-pre-gyp verb cli   '--fallback-to-build' ]
node-pre-gyp info using node-pre-gyp@0.6.32
node-pre-gyp info using node@10.16.3 | linux | arm
node-pre-gyp verb command install []
node-pre-gyp info check checked for "/opt/iobroker/node_modules/serialport/build/Release/serialport.node" (not found)
node-pre-gyp http GET https://github.com/EmergingTechnologyAdvisors/node-serialport/releases/download/4.0.7/serialport-                                                                      v4.0.7-node-v64-linux-arm.tar.gz
node-pre-gyp ERR! Tried to download(undefined): https://github.com/EmergingTechnologyAdvisors/node-serialport/releases/                                                                      download/4.0.7/serialport-v4.0.7-node-v64-linux-arm.tar.gz
node-pre-gyp ERR! Pre-built binaries not found for serialport@4.0.7 and node@10.16.3 (node-v64 ABI) (falling back to so                                                                      urce compile with node-gyp)
node-pre-gyp http EACCES: permission denied, mkdir '/opt/iobroker/node_modules/serialport/build'
node-pre-gyp verb command build [ 'rebuild' ]
node-pre-gyp http 404 https://github.com/EmergingTechnologyAdvisors/node-serialport/releases/download/4.0.7/serialport-                                                                      v4.0.7-node-v64-linux-arm.tar.gz
node-pre-gyp ERR! Tried to download(404): https://github.com/EmergingTechnologyAdvisors/node-serialport/releases/downlo                                                                      ad/4.0.7/serialport-v4.0.7-node-v64-linux-arm.tar.gz
node-pre-gyp ERR! Pre-built binaries not found for serialport@4.0.7 and node@10.16.3 (node-v64 ABI) (falling back to so                                                                      urce compile with node-gyp)
node-pre-gyp http 404 status code downloading tarball https://github.com/EmergingTechnologyAdvisors/node-serialport/rel                                                                      eases/download/4.0.7/serialport-v4.0.7-node-v64-linux-arm.tar.gz
node-pre-gyp verb command build [ 'rebuild' ]
node-pre-gyp ERR! Tried to download(undefined): https://github.com/EmergingTechnologyAdvisors/node-serialport/releases/                                                                      download/4.0.7/serialport-v4.0.7-node-v64-linux-arm.tar.gz
node-pre-gyp ERR! Pre-built binaries not found for serialport@4.0.7 and node@10.16.3 (node-v64 ABI) (falling back to so                                                                      urce compile with node-gyp)
node-pre-gyp http Connection closed while downloading tarball file
node-pre-gyp verb command build [ 'rebuild' ]
gyp WARN EACCES user "root" does not have permission to access the dev dir "/root/.node-gyp/10.16.3"
gyp WARN EACCES attempting to reinstall using temporary dev dir "/tmp/.node-gyp"
gyp ERR! configure error
gyp ERR! stack Error: EACCES: permission denied, mkdir '/opt/iobroker/node_modules/serialport/build'
gyp ERR! System Linux 4.19.66-v7+
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "--fallb                                                                      ack-to-build" "--module=/opt/iobroker/node_modules/serialport/build/Release/serialport.node" "--module_name=serialport"                                                                       "--module_path=/opt/iobroker/node_modules/serialport/build/Release"
gyp ERR! cwd /opt/iobroker/node_modules/serialport
gyp ERR! node -v v10.16.3
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
node-pre-gyp ERR! build error
node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/nod                                                                      e-gyp.js configure --fallback-to-build --module=/opt/iobroker/node_modules/serialport/build/Release/serialport.node --m                                                                      odule_name=serialport --module_path=/opt/iobroker/node_modules/serialport/build/Release' (1)
node-pre-gyp ERR! stack     at ChildProcess.<anonymous> (/opt/iobroker/node_modules/serialport/node_modules/node-pre-gy                                                                      p/lib/util/compile.js:83:29)
node-pre-gyp ERR! stack     at ChildProcess.emit (events.js:198:13)
node-pre-gyp ERR! stack     at maybeClose (internal/child_process.js:982:16)
node-pre-gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5)
node-pre-gyp ERR! System Linux 4.19.66-v7+
node-pre-gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/serialport/node_modules/.bin/node-pre-gyp" "insta                                                                      ll" "--fallback-to-build"
node-pre-gyp ERR! cwd /opt/iobroker/node_modules/serialport
node-pre-gyp ERR! node -v v10.16.3
node-pre-gyp ERR! node-pre-gyp -v v0.6.32
node-pre-gyp ERR! not ok
Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js configure --fallback-t                                                                      o-build --module=/opt/iobroker/node_modules/serialport/build/Release/serialport.node --module_name=serialport --module_                                                                      path=/opt/iobroker/node_modules/serialport/build/Release' (1)

> iobroker.js-controller@1.5.14 install /opt/iobroker/node_modules/iobroker.js-controller
> node iobroker.js setup first

gyp WARN EACCES user "root" does not have permission to access the dev dir "/root/.node-gyp/10.16.3"
gyp WARN EACCES attempting to reinstall using temporary dev dir "/tmp/.node-gyp"
gyp ERR! configure error
gyp ERR! stack Error: EACCES: permission denied, mkdir '/opt/iobroker/node_modules/serialport/build'
gyp ERR! System Linux 4.19.66-v7+
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "--fallb                                                                      ack-to-build" "--module=/opt/iobroker/node_modules/serialport/build/Release/serialport.node" "--module_name=serialport"                                                                       "--module_path=/opt/iobroker/node_modules/serialport/build/Release"
gyp ERR! cwd /opt/iobroker/node_modules/serialport
gyp ERR! node -v v10.16.3
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
gyp WARN EACCES user "root" does not have permission to access the dev dir "/root/.node-gyp/10.16.3"
gyp WARN EACCES attempting to reinstall using temporary dev dir "/tmp/.node-gyp"
gyp ERR! configure error
gyp ERR! stack Error: EACCES: permission denied, mkdir '/opt/iobroker/node_modules/serialport/build'
gyp ERR! System Linux 4.19.66-v7+
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "--fallb                                                                      ack-to-build" "--module=/opt/iobroker/node_modules/serialport/build/Release/serialport.node" "--module_name=serialport"                                                                       "--module_path=/opt/iobroker/node_modules/serialport/build/Release"
gyp ERR! cwd /opt/iobroker/node_modules/serialport
gyp ERR! node -v v10.16.3
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
Cannot delete file. Not critical: Error: EACCES: permission denied, unlink '/opt/iobroker/node_modules/iobroker.js-cont                                                                      roller/lib/setup/../../_service_iobroker.bat'
Cannot delete file. Not critical: Error: EACCES: permission denied, unlink '/opt/iobroker/node_modules/iobroker.js-cont                                                                      roller/lib/setup/../../iobroker.bat'
fs.js:114
    throw err;
    ^

Error: EACCES: permission denied, mkdir '/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/../../tmp'
    at Object.mkdirSync (fs.js:757:3)
    at Setup.setup (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupSetup.js:189:58)
    at /opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js:653:27
    at processCommand (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js:691:15)
    at Object.module.exports.execute (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js:3193:5)
    at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js:1:38)
    at Module._compile (internal/modules/cjs/loader.js:778:30)
    at Object.Module._extensions..js (internal/modules/cjs/loader.js:789:10)
    at Module.load (internal/modules/cjs/loader.js:653:32)
    at tryModuleLoad (internal/modules/cjs/loader.js:593:12)
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: serialport@4.0.7 (node_modules/serialport):
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: serialport@4.0.7 install: `node-pre-gyp install --fallback-to-build`
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1

npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! iobroker.js-controller@1.5.14 install: `node iobroker.js setup first`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the iobroker.js-controller@1.5.14 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /root/.npm/_logs/2019-09-01T14_57_46_659Z-debug.log

Ist da noch etwas zu retten, oder muss ich alles neu aufsetzen?

Ich habe genau des gleiche Problem nach einem Update von Node.js. Bei mir läuft leider der unsafe Befehl nicht:

pi@ioBroker-RasPi:/opt/iobroker $ sudo npm install iobroker.js-controller –unsafe-perm
npm ERR! code EINVALIDTAGNAME
npm ERR! Invalid tag name "–unsafe-perm": Tags may not have any characters that encodeURIComponent encodes.

npm ERR! A complete log of this run can be found in:
npm ERR!     /root/.npm/_logs/2019-09-01T14_48_36_805Z-debug.log

Hat jemand eine Idee?