Habe mittlerweile auch eine Node Red Offline Lösung mittels seriellen Adapter am Laufen falls jemand Interesse hat. Läuft seit über einem Jahr ohne Probleme und ich bin nicht mehr auf die SYR Cloud angewiesen.

Hi @Garfonso und Co.

großes Lob für die Entwicklung hier, glaub im LoveLace Adapter steckt großes Potential.
Habe noch etwas Probleme mit der Einarbeitung aber wird schon langsam.

Die Jungs bei Home Assistant sind ja auch sehr fleißig. Mich würde mal interessieren ob ein Abgleich auf die aktuellste LoveVersion auch geplant ist? So wie ich das verstehe, basiert die IOBroker Version auf einem Stand von Mitte 2019. In der Zwischenzeit hat sich dort ja einiges getan, wie z.B. visuelle Editoren für horizontale und verticale Stapel.

Weiterhin wäre ein Kommentar in der ReadMe super, dass man für die AUTO-Generierung von Entitäten den "Devices Adapter" verwendet sollte. Kannte den zuvor gar nicht und bin nur zufällig hier im Forum drauf gestoßen.

Viele Grüße, KNXBroker

@ilovegym kann alles schalten, aber habe den SYR safe-t connect; habe das Netzwerkkabel rausgezogen und bediene nun alles mittels der seriellen Service Schnittstelle

@dmq Kein Problem, unten findest du den Node Red Code im Anhang zur lokalen Ansteuerung eines SYR safe-t connect über RS485. Wie gesagt, ich nutze IOBroker nicht mehr, du musst die ganzen Home Assistant I/O Nodes entsprechend konvertieren, aber die Logik sollte die gleiche sein.

Achtung: Netzwerkkabel abstecken, sonst funktioniert es nicht. Parallelbetrieb von Cloud und dieser Offline Lösung ist nicht möglich, aber die Offline Lösung arbeitet bei mir seit langem zuverlässiger als die Cloud.

Was macht das Script?

• Alle drei Minuten gibt es auf dem RS485 Bus eine Art ALIVE Abfrage. Das Skript wartet auf diese Abfrage und beginnt dann zu arbeiten.
• Alle 20s werden Steuerungsbefehle abgeschickt, sofern vorhanden. Alle 25s werden die Statusdaten vom Gerät gelesen.
• Kurz bevor die ALIVE Abfrage wieder kommt, macht das Skript Pause und synchronisiert sich dann wieder auf die nächste ALIVE Abfrage auf.

Viel Spass

SYR Connect RS485 Offline Control V2.txt

@ilovegym kann alles schalten, aber habe den SYR safe-t connect; habe das Netzwerkkabel rausgezogen und bediene nun alles mittels der seriellen Service Schnittstelle

Habe mittlerweile auch eine Node Red Offline Lösung mittels seriellen Adapter am Laufen falls jemand Interesse hat. Läuft seit über einem Jahr ohne Probleme und ich bin nicht mehr auf die SYR Cloud angewiesen.

@dmq Kein Ding, vielleicht hilft es ja auch anderen. Ohne die Hilfe von @Kachel wäre das nicht möglich gewesen, großes Dankeschön meinerseits.

Hi @dmq, und alle anderen die daran Interesse haben:

Habe nun auch die Bestätigung von Alarmmeldungen in Node Red Implementiert, ich verweise hier einfach mal auf meinen Post im Home Assistant Forum:

https://community.home-assistant.io/t/add-support-for-leakage-detection-device-safe-t-connect-from-hans-sasserath-gmbh-co-kg/172728/12?u=knxbroker

Eine komplette Offline Lösung sollte eigentlich auch nicht so schwer sein zu implementieren, aber für mich erstmal so okay.

@dmq Und hier Node Red Code zur Steuerung, wieder ohne Home Assistant Knoten.

ToDo: Bestätigung von Alarm Meldungen!

Steuerung ist ebenfalls vom WebServer abhängig und somit nicht lokal. Der Code wartet auf die WebServer Abfrage und schickt danacht Befehle los, um eine Kollision zu vermeiden.

[{"id":"d2dddf837a5f48b7","type":"function","z":"7d9d3cbb2597cd82","name":"Wait for msg.release","func":"const messages = context.get('messages') || [];\n\nif(msg.release) {\n    context.set('messages', null);\n    node.status({text: `Sent: ${messages.length}`});\n    return [messages];\n}\n\nmessages.push(msg);\ncontext.set('messages', messages);\nnode.status({text: `Holding: ${messages.length}`});","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":720,"y":2580,"wires":[["9f5e2b7a9f1ee9da"]]},{"id":"850c0728ec1a735c","type":"change","z":"7d9d3cbb2597cd82","name":"","rules":[{"t":"set","p":"release","pt":"msg","to":"true","tot":"bool"}],"action":"","property":"","from":"","to":"","reg":false,"x":410,"y":2440,"wires":[["d2dddf837a5f48b7"]]},{"id":"2841702637ee5a33","type":"function","z":"7d9d3cbb2597cd82","name":"setAB2","func":"// Close the vavle\nvar cmdstart = Buffer.from(\"0d0a1b313a\", \"hex\");\nvar cmdmiddle = Buffer.from(\"setAB2\");\nvar cmdend = Buffer.from(\"0d0a\", \"hex\"); // cR + LF\nmsg.payload = Buffer.concat([cmdstart, cmdmiddle, cmdend]);\nreturn msg;","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":400,"y":2520,"wires":[["d2dddf837a5f48b7"]]},{"id":"7ec7b7f3b2be5f8b","type":"function","z":"7d9d3cbb2597cd82","name":"setAB1","func":"// Open the vavle\nvar cmdstart = Buffer.from(\"0d0a1b313a\", \"hex\");\nvar cmdmiddle = Buffer.from(\"setAB1\");\nvar cmdend = Buffer.from(\"0d0a\", \"hex\"); // CR + LF\nmsg.payload = Buffer.concat([cmdstart, cmdmiddle, cmdend]);\nreturn msg;","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":400,"y":2580,"wires":[["d2dddf837a5f48b7"]]},{"id":"3bc209160cce93a1","type":"serial in","z":"7d9d3cbb2597cd82","name":"","serial":"07c6650d2ff49b41","x":170,"y":2440,"wires":[["850c0728ec1a735c"]]},{"id":"41ad879c02123e89","type":"function","z":"7d9d3cbb2597cd82","name":"setTmp0","func":"// Set temporary inactivity time to 0s\nvar cmdstart = Buffer.from(\"0d0a1b313a\", \"hex\");\nvar cmdmiddle = Buffer.from(\"setTMP0\");\nvar cmdend = Buffer.from(\"0d\", \"hex\");\nmsg.payload = Buffer.concat([cmdstart, cmdmiddle, cmdend]);\nreturn msg;","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":400,"y":2740,"wires":[["d2dddf837a5f48b7"]]},{"id":"fce9cff1374cce55","type":"function","z":"7d9d3cbb2597cd82","name":"setTmp14400","func":"// Set temporary inactivity time to 4h\nvar cmdstart = Buffer.from(\"0d0a1b313a\", \"hex\");\nvar cmdmiddle = Buffer.from(\"setTMP14400\");\nvar cmdend = Buffer.from(\"0d\", \"hex\");\nmsg.payload = Buffer.concat([cmdstart, cmdmiddle, cmdend]);\nreturn msg;","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":420,"y":2680,"wires":[["d2dddf837a5f48b7"]]},{"id":"46a371ee6322b0b8","type":"comment","z":"7d9d3cbb2597cd82","name":"SYR Connect - Control ","info":"","x":200,"y":2380,"wires":[]},{"id":"55aa5d6d321d51ec","type":"function","z":"7d9d3cbb2597cd82","name":"setUL0","func":"// Close the vavle\nvar cmdstart = Buffer.from(\"0d0a1b313a\", \"hex\");\nvar cmdmiddle = Buffer.from(\"setUL0\");\nvar cmdend = Buffer.from(\"0d0a\", \"hex\"); // cR + LF\nmsg.payload = Buffer.concat([cmdstart, cmdmiddle, cmdend]);\nreturn msg;","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":400,"y":2820,"wires":[["d2dddf837a5f48b7"]]},{"id":"abef738776e765eb","type":"function","z":"7d9d3cbb2597cd82","name":"setUL3","func":"// Open the vavle\nvar cmdstart = Buffer.from(\"0d0a1b313a\", \"hex\");\nvar cmdmiddle = Buffer.from(\"setUL3\");\nvar cmdend = Buffer.from(\"0d0a\", \"hex\"); // CR + LF\nmsg.payload = Buffer.concat([cmdstart, cmdmiddle, cmdend]);\nreturn msg;","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":400,"y":2880,"wires":[["d2dddf837a5f48b7"]]},{"id":"e3b1591eaec5c765","type":"comment","z":"7d9d3cbb2597cd82","name":"Ventil Zu","info":"","x":160,"y":2520,"wires":[]},{"id":"9a432a6df02f8f39","type":"comment","z":"7d9d3cbb2597cd82","name":"Ventil Auf","info":"","x":160,"y":2580,"wires":[]},{"id":"996ebd2f1e184a87","type":"comment","z":"7d9d3cbb2597cd82","name":"Anwesend","info":"","x":160,"y":2820,"wires":[]},{"id":"95ab097536ee9cf2","type":"comment","z":"7d9d3cbb2597cd82","name":"Abwesend (30L)","info":"","x":180,"y":2880,"wires":[]},{"id":"b25ef65f1a65fc12","type":"comment","z":"7d9d3cbb2597cd82","name":"Inaktiv Timer 4h","info":"","x":180,"y":2680,"wires":[]},{"id":"bc165e6cd206e810","type":"comment","z":"7d9d3cbb2597cd82","name":"Inaktiv Timer Aus","info":"","x":180,"y":2740,"wires":[]},{"id":"344b580893fb384e","type":"serial out","z":"7d9d3cbb2597cd82","name":"","serial":"07c6650d2ff49b41","x":730,"y":2720,"wires":[]},{"id":"9f5e2b7a9f1ee9da","type":"delay","z":"7d9d3cbb2597cd82","name":"","pauseType":"delay","timeout":"300","timeoutUnits":"milliseconds","rate":"1","nbRateUnits":"1","rateUnits":"second","randomFirst":"1","randomLast":"5","randomUnits":"seconds","drop":false,"allowrate":false,"outputs":1,"x":720,"y":2660,"wires":[["f4043b8aa0ba6a4e","344b580893fb384e"]]},{"id":"07c6650d2ff49b41","type":"serial-port","serialport":"/dev/ttyUSB1","serialbaud":"19200","databits":"8","parity":"none","stopbits":"1","waitfor":"","dtr":"none","rts":"none","cts":"none","dsr":"none","newline":"2000","bin":"false","out":"interbyte","addchar":"","responsetimeout":"300"}]

@dmq nicht wirklich, das Thema hat im Sommer leider keine Prio...

Falls von Interesse, hier schon mal Node Red Code zum Auslesen der Webserver Requests.
Die Einzelabfrage (komplett lokal) gestaltet sich als schwierig, da das interne LAN Modul immer dazwischen quatscht. Ich kann damit vorerst so leben, sollte es eines Tages die Cloud nicht mehr geben, dann werde ich das LAN Modul intern abklemmen.

PS: Den Home Assistant spezifischen Teil habe ich in diesem Forum mal weggelassen.

[{"id":"c346de70e5a46098","type":"serial in","z":"7d9d3cbb2597cd82","name":"","serial":"07c6650d2ff49b41","x":190,"y":2340,"wires":[["9d3388838e7f0cb7","94a5d32d473eb13d","d2190ca65994c11d","c499ae1e1b0a14b5","b09321ac134f816a","4ce39c90acf1d1d5"]]},{"id":"7c813e64bee7583b","type":"function","z":"7d9d3cbb2597cd82","name":"getBAR Match","func":"// Get water pressure [bar]\nconst pattern = new RegExp(\"(?<=getbar\\\\r)(\\\\d*)\", \"i\");\nvar found = msg.payload.match(pattern);\nif (Array.isArray(found)) {\n    msg.payload = Math.round(found[0].replace(',', '.') / 100) / 10;\n    return msg;\n} else {\n    return null;\n}","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":600,"y":2640,"wires":[[]]},{"id":"0e3a4af116c977f1","type":"function","z":"7d9d3cbb2597cd82","name":"getVOL Match","func":"// Get total water volume [L]\nconst pattern = new RegExp(\"(?<=Vol\\\[L\\\])(\\\\d*)\", \"i\");\nvar found = msg.payload.match(pattern);\nif (Array.isArray(found)) {\n    msg.payload = found[0].replace(',', '.');\n    return msg;\n} else {\n    return null;\n}","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":600,"y":2700,"wires":[[]]},{"id":"9d3388838e7f0cb7","type":"delay","z":"7d9d3cbb2597cd82","name":"","pauseType":"rate","timeout":"5","timeoutUnits":"seconds","rate":"1","nbRateUnits":"1","rateUnits":"minute","randomFirst":"1","randomLast":"5","randomUnits":"seconds","drop":true,"allowrate":false,"outputs":1,"x":340,"y":2640,"wires":[["7c813e64bee7583b","0e3a4af116c977f1","1115f0f138466e0c","f424d047f8af2bea"]]},{"id":"1115f0f138466e0c","type":"function","z":"7d9d3cbb2597cd82","name":"getBAR Match","func":"// Get water pressure [Bar]\nconst pattern = new RegExp(\"(?<=getBat\\\\r)(\\\\d*,\\\\d*)\", \"i\");\nvar found = msg.payload.match(pattern);\nif (Array.isArray(found)) {\n    msg.payload = Math.round(found[0].replace(',', '.') * 10) / 10;\n    return msg;\n} else {\n    return null;\n}","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":600,"y":2760,"wires":[[]]},{"id":"f424d047f8af2bea","type":"function","z":"7d9d3cbb2597cd82","name":"getCEL Match","func":"// Get water temperature [°C]\nconst pattern = new RegExp(\"(?<=getCel\\\\r)(\\\\d*)\", \"i\");\nvar found = msg.payload.match(pattern);\nif (Array.isArray(found)) {\n    msg.payload = found[0].replace(',', '.') / 10;\n    return msg;\n} else {\n    return null;\n}","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":600,"y":2820,"wires":[[]]},{"id":"94a5d32d473eb13d","type":"function","z":"7d9d3cbb2597cd82","name":"getAB Match","func":"// Get valve status [1= Open / 2 = Closed]\nconst pattern = new RegExp(\"(?<=getAB\\\\r)(\\\\d*)\", \"i\");\nvar found = msg.payload.match(pattern);\nif (Array.isArray(found)) {\n    msg.payload = Math.abs(found[0] - 2); // HA specific adaption\n    return msg;\n} else {\n    return null;\n}","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":590,"y":2460,"wires":[[]]},{"id":"d2190ca65994c11d","type":"function","z":"7d9d3cbb2597cd82","name":"getALA Match","func":"// Get alarms\nconst pattern = new RegExp(\"(?<=getALA\\\\r)(.*)\", \"i\");\nvar found = msg.payload.match(pattern);\nif (Array.isArray(found)) {\n    var failure;\n    var issue = true;\n    switch (found[0]) {\n        case \"A1\":\n            failure = \"Absperrung defekt\"\n            break;\n        case \"A2\":\n            failure = \"Kein Turbinen-Signal\"\n            break;\n        case \"A3\":\n            failure = \"Anwesenheits-Leckage\"\n            break;\n        case \"A4\":\n            failure = \"Durchfluss-Leckage\"\n            break;\n        case \"A5\":\n            failure = \"Abwesenheits-Leckage\"\n            break;\n        case \"A6\":\n            failure = \"Bodensensor-Leckage\"\n            break;\n        case \"A7\":\n            failure = \"Leckage an Eingang IN2\"\n            break;\n        case \"FF\":\n            failure = \"Keine\";\n            issue = false;\n            break;\n        default:\n            failure = \"Unbekannte Störung \" + found;\n    }\n    msg.payload = failure;\n    msg.issue = issue;\n    return msg;\n} else {\n    return null;\n}","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":600,"y":2520,"wires":[[]]},{"id":"c499ae1e1b0a14b5","type":"function","z":"7d9d3cbb2597cd82","name":"getTMP Match","func":"// Get temporary inactivity time [s]\nconst pattern = new RegExp(\"(?<=getTMP\\\\r)(\\\\d*)\", \"i\");\nvar found = msg.payload.match(pattern);\nif (Array.isArray(found)) {\n    msg.payload = found[0];\n    return msg;\n} else {\n    return null;\n}","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":600,"y":2400,"wires":[[]]},{"id":"b09321ac134f816a","type":"function","z":"7d9d3cbb2597cd82","name":"getUL Match","func":"// Get presense\nconst pattern = new RegExp(\"(?<=getUL\\\\r)(\\\\d*)\", \"i\");\nvar found = msg.payload.match(pattern);\nif (Array.isArray(found)) {\n    if (found[0] == 0) {\n        msg.payload = true;\n        return msg;\n    }\n    else {\n        msg.payload = false;\n        return msg;\n    }\n} else {\n    return null;\n}","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":590,"y":2340,"wires":[[]]},{"id":"4ce39c90acf1d1d5","type":"function","z":"7d9d3cbb2597cd82","name":"getLE Match","func":"// Get current water limit [L]\nconst pattern = new RegExp(\"(?<=getLE\\\\r)(\\\\d*)\", \"i\");\nvar found = msg.payload.match(pattern);\nif (Array.isArray(found)) {\n    msg.payload = found[0]*50;\n    return msg;\n} else {\n    return null;\n}","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":590,"y":2580,"wires":[[]]},{"id":"d9ef234728f55896","type":"comment","z":"7d9d3cbb2597cd82","name":"Anwesendheit","info":"","x":850,"y":2340,"wires":[]},{"id":"8c0b98a0743a69a4","type":"comment","z":"7d9d3cbb2597cd82","name":"Temporäre Inaktivität","info":"","x":870,"y":2400,"wires":[]},{"id":"f8dd9b2a4b0d85fb","type":"comment","z":"7d9d3cbb2597cd82","name":"Auslesen von WebServer Requests","info":"","x":260,"y":2260,"wires":[]},{"id":"edce790ca722ef59","type":"comment","z":"7d9d3cbb2597cd82","name":"Ventilstatus","info":"","x":850,"y":2460,"wires":[]},{"id":"7e4e1d3dbd0ef890","type":"comment","z":"7d9d3cbb2597cd82","name":"Alarm","info":"","x":830,"y":2520,"wires":[]},{"id":"ef3777ab8741ac8f","type":"comment","z":"7d9d3cbb2597cd82","name":"Wasserlimit","info":"","x":850,"y":2580,"wires":[]},{"id":"8369c6d71aa2f63a","type":"comment","z":"7d9d3cbb2597cd82","name":"Wasserdruck","info":"","x":850,"y":2640,"wires":[]},{"id":"242b89811638941f","type":"comment","z":"7d9d3cbb2597cd82","name":"Volumen Gesamt","info":"","x":860,"y":2700,"wires":[]},{"id":"6cedcffe51a141e9","type":"comment","z":"7d9d3cbb2597cd82","name":"Wasserdruck","info":"","x":850,"y":2760,"wires":[]},{"id":"836ac7537e1cce37","type":"comment","z":"7d9d3cbb2597cd82","name":"Wassertemperatur","info":"","x":870,"y":2820,"wires":[]},{"id":"07c6650d2ff49b41","type":"serial-port","serialport":"/dev/ttyUSB1","serialbaud":"19200","databits":"8","parity":"none","stopbits":"1","waitfor":"","dtr":"none","rts":"none","cts":"none","dsr":"none","newline":"2000","bin":"false","out":"interbyte","addchar":"","responsetimeout":"300"}]

Ich bin gerade dran eine Lösung mittels NodeRed zu realisieren, allerdings im ersten Schritt parallel zu den Cloud Abfragen. Solange die Cloud aktiv ist, werde ich dies wahrscheinlich auch so belassen. Läuft bisher ganz gut, aber mir fehlen noch ein paar Kommandos bis ich mein Ergebnis veröffentlichen werde.
Bin vor einiger Zeit zu Home Assistant gewechselt und werde dort meine Lösung auch präsentieren, sobald ich fertig bin. Den Link werde ich natürlich hier posten.

Genial! Hat denn hier schon jemand weiter gemacht?

@david-g Hi zusammen, kann leider nicht (mehr) helfen, bin komplett auf Home Assistant umgestiegen...