NEWS
Sonoff POW mit "falscher" Firmware geflasht.
-
Habe 2 normale Sonoff mit der Tasmota Firmware geflasht: https://www.youtube.com/watch?v=wSjzj-Imj0c
Das hat auch wunderbar funktioniert.
Wollte jetzt mein Sonoff Pow flashen, leider war die Originale Firmware zu hoch.
Haben dann folgendes verfahren angewandt: https://ownsmarthome.de/2017/11/sonoff- … xa-nutzen/
Bei der Firmware habe ich aber keine Möglichkeit mqtt Werte einzutragen. Siehe Screenshots:
Danke
-
hast Du jetzt eine Frage oder doch keine….
siehe zu der Firmware 1.0.21
` > Version 1.0.21 and down:
a short press toggles the relay either by sending a MQTT message like cmnd/sonoff/light 2 or directly. This will blink the LED twice and sends a MQTT status message like stat/sonoff/LIGHT on
two short presses toggles the relay. This will blink the LED twice and sends a MQTT status message like stat/sonoff/POWER on
three short presses start Wifi smartconfig which allows for SSID and Password configuration using an Android mobile phone with the ESP8266 SmartConfig app. The green LED will blink during the smartconfig period for 1 minute. The MQTT server still needs to be configured in the user_config.h file
four short presses start OTA download of firmware. The green LED is lit during the update
five short presses will restart sonoff
pressing the button for over four seconds resets settings to defaults as defined in user_config.h and restarts the device `
genau den Abschnitt:
The MQTT server still needs to be configured in the user_config.h file
heißt wohl vereinfacht:
Der MQTT-Server muss weiterhin in der Datei user_config.h konfiguriert werden.