Adapter "smartmeter"

Forum für Ideen, wie ioBroker verbessert werden kann
noxx
professional
Beiträge: 308
Registriert: 16.06.2017, 19:45

Re: Neuer Adapter "smartmeter"

Beitrag von noxx » 06.08.2017, 19:08

kann man mit nem Arduino (Nodemcu) nichts zaubern?

noxx
professional
Beiträge: 308
Registriert: 16.06.2017, 19:45

Re: Neuer Adapter "smartmeter"

Beitrag von noxx » 06.08.2017, 19:40

im übrigen spuckt ESPeasy auch was im JSON aus. Weiß nur
nicht, ob man was damit anfangen kann

Folgender Code

Code: Alles auswählen

http://192.168.1.43/json?tasknr=1
liefert

Code: Alles auswählen

{
"TaskName": "Gaszaehler",
"Count": 0.00,
"Total": 5.00,
"Time": 13251.00
}

Benutzeravatar
apollon77
guru
Beiträge: 4739
Registriert: 10.04.2015, 12:27

Re: Neuer Adapter "smartmeter"

Beitrag von apollon77 » 06.08.2017, 20:09

Bisher basiert die auswertelogik des Adapters auf OBIS-IDs. Das ist ein Standard um zählerwerte zu kodieren. Ein json Format kann er schon: vom efr Smart Grid hub. Format: http://www.mysmartshop.de/pdf/bedienung ... eitung.pdf Seite 10 ... Bau das als Ausgabe nach und es tut ;-). Es müssen auch nicht die gleichen und alle der im Beispiel gezeigten OBIS Werte kommen. Halt das was man haben will ... das wäre das einfachste.

Benutzeravatar
apollon77
guru
Beiträge: 4739
Registriert: 10.04.2015, 12:27

Re: Neuer Adapter "smartmeter"

Beitrag von apollon77 » 06.08.2017, 20:11

Ps: einfaches auslesen so eines http Ziels ist aber auch mit iobroker JavaScript Mega simpel ohne Adapter. Der Adapter ist hier nur da weil er die Protokolle implementiert hat und das OBIS Mapping macht.

noxx
professional
Beiträge: 308
Registriert: 16.06.2017, 19:45

Re: Neuer Adapter

Beitrag von noxx » 06.08.2017, 20:35

apollon77 hat geschrieben:Ps: einfaches auslesen so eines http Ziels ist aber auch mit iobroker JavaScript Mega simpel ohne Adapter. Der Adapter ist hier nur da weil er die Protokolle implementiert hat und das OBIS Mapping macht.
Für mich (im moment) leider nicht.

Benutzeravatar
apollon77
guru
Beiträge: 4739
Registriert: 10.04.2015, 12:27

Re: Neuer Adapter "smartmeter"

Beitrag von apollon77 » 06.08.2017, 21:48

Alls wie man HTTP Requests macht und JSON-Daten verarbeitet findest Du hier im Forum mehrfach :-))

Beispiel: http://forum.iobroker.net/viewtopic.php ... est#p66916

church
starter
Beiträge: 68
Registriert: 11.08.2017, 09:14

Re: Neuer Adapter "smartmeter"

Beitrag von church » 11.08.2017, 09:39

Hallo,

ich habe den Thread durchgelesen, bin aber leider nicht weitergekommen!

Ich habe einen Easymeter Q3D, der im D0 Protokoll alle 2s ohne request ein Telegramm sendet! Mit

cat /dev/ttyUSB0

sieht ein kompletter Datensatz so aus (7E1 mit 9600baud eingestellt):

Code: Alles auswählen

/ESY5Q3DA2004 V3.03

1-0:0.0.0*255(XXXXXX)
1-0:1.8.0*255(00090303.3530030*kWh)
1-0:21.7.255*255(000220.50*W)
1-0:41.7.255*255(000160.70*W)
1-0:61.7.255*255(000035.80*W)
1-0:1.7.255*255(000417.00*W)
1-0:96.5.5*255(82)
0-0:96.1.255*255(1ESYXXXXXXXXXX)
!

In den Adapter Einstellungen habe ich dann u.a. folgendes probiert:
Bildschirmfoto 2017-08-11 um 10.33.44.jpg
Das Resultat im log ist dann logendes (es werden keine Datenpunkte angelegt):

Code: Alles auswählen

host.raspberrypi	2017-08-11 12:31:07.845	info	Restart adapter system.adapter.smartmeter.0 because enabled
host.raspberrypi	2017-08-11 12:31:07.844	error	instance system.adapter.smartmeter.0 terminated with code 0 (OK)
smartmeter.0	2017-08-11 12:31:07.339	warn	Exception: Error: No or too long message from Serial Device.
smartmeter.0	2017-08-11 12:31:07.338	error	Error: No or too long message from Serial Device. at SerialResponseTransport.handleSerialTimeout (/opt/iobroker/node_modules/smartmeter-obis/lib/transports/SerialResponseTransport.js:200:11) a
smartmeter.0	2017-08-11 12:31:07.332	error	uncaught exception: No or too long message from Serial Device.
smartmeter.0	2017-08-11 12:29:07.274	info	SerialResponseTransport do not support sending of Data! Ignore them
smartmeter.0	2017-08-11 12:29:06.247	info	starting. Version 0.5.12 in /opt/iobroker/node_modules/iobroker.smartmeter, node: v6.11.2
Was hab ich falsch gemacht?

Danke und Gruss,

Church

Benutzeravatar
apollon77
guru
Beiträge: 4739
Registriert: 10.04.2015, 12:27

Re: Neuer Adapter "smartmeter"

Beitrag von apollon77 » 11.08.2017, 18:21

Starte mal bitte den Adapter im Debug Modus (Instanzen expertenmodus dann ist da Spalte mit dem loglevel). Hast du im Adapter die Einstellungen und D0 als Protokoll gesetzt?

church
starter
Beiträge: 68
Registriert: 11.08.2017, 09:14

Re: Neuer Adapter "smartmeter"

Beitrag von church » 11.08.2017, 21:24

D0 ist als Protokoll gesetzt. Debug gibt folgendes:

Code: Alles auswählen

smartmeter.0	2017-08-11 22:22:42.168	debug	MESSAGE TIMEOUT TRIGGERED
smartmeter.0	2017-08-11 22:20:42.108	debug	REMAINING DATA AFTER MESSAGE HANDLING:
smartmeter.0	2017-08-11 22:20:42.108	debug	CURRENT PROCESS STEP 4 IN ISPROCESSCOMPLETE: false
smartmeter.0	2017-08-11 22:20:42.107	debug	SET MESSAGE TIMEOUT TIMER: 120000
smartmeter.0	2017-08-11 22:20:42.107	debug	CURRENT PROCESS STEP 4 IN ISPROCESSCOMPLETE: false
smartmeter.0	2017-08-11 22:20:42.107	debug	OVERWRITE D0-MODE C WITH A
smartmeter.0	2017-08-11 22:20:42.107	debug	CURRENT PROCESS STEP 2 IN HANDLEMESSAGE
smartmeter.0	2017-08-11 22:20:42.106	debug	PAUSE READING SERIALPORT TO HANDLE MESSAGE
smartmeter.0	2017-08-11 22:20:42.106	debug	MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3.03\r\n" -> ["/ESY5Q3DA2004 V3.03\r\n","/ESY5Q3DA2004 V3.03"]
smartmeter.0	2017-08-11 22:20:42.106	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-11 22:20:42.106	debug	MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3.03" -> null
smartmeter.0	2017-08-11 22:20:42.105	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-11 22:20:42.105	debug	MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3.0" -> null
smartmeter.0	2017-08-11 22:20:42.105	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-11 22:20:42.105	debug	MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3" -> null
smartmeter.0	2017-08-11 22:20:42.104	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-11 22:20:42.104	debug	MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V" -> null
smartmeter.0	2017-08-11 22:20:42.104	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-11 22:20:42.103	debug	MATCH-RESULT SIGNON: "/ESY5" -> null
smartmeter.0	2017-08-11 22:20:42.102	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-11 22:20:41.092	debug	SET MESSAGE TIMEOUT TIMER: 120000
smartmeter.0	2017-08-11 22:20:41.092	debug	SERIALPORT OPEN
smartmeter.0	2017-08-11 22:20:41.092	debug	CREATE SERIALPORT: 9600 7 1 even

Benutzeravatar
apollon77
guru
Beiträge: 4739
Registriert: 10.04.2015, 12:27

Re: Neuer Adapter "smartmeter"

Beitrag von apollon77 » 11.08.2017, 22:26

Ok, warum hast du den "D0 Mode overwrite" denn gesetzt in den Einstellungen ?! Nimm das mal raus. Denke das das das Problem ist. Wenn nicht tut bitte nochmal log komplett inkl Start (der fehlt hier).

church
starter
Beiträge: 68
Registriert: 11.08.2017, 09:14

Re: Neuer Adapter "smartmeter"

Beitrag von church » 12.08.2017, 08:26

Mit dem D0 overwrite hatte ich etwas "rumgespielt", daher im log im Modus "A", hatte aber auch schon andere Einstellungen!

Hier der log inkl. Start ohne overwrite:

Code: Alles auswählen

host.raspberrypi	2017-08-12 09:22:56.878	info	Restart adapter system.adapter.smartmeter.0 because enabled
host.raspberrypi	2017-08-12 09:22:56.877	error	instance system.adapter.smartmeter.0 terminated with code 0 (OK)
smartmeter.0	2017-08-12 09:22:56.366	debug	SERIALPORT CLOSE
smartmeter.0	2017-08-12 09:22:56.366	warn	Exception: Error: No or too long message from Serial Device.
smartmeter.0	2017-08-12 09:22:56.366	error	Error: No or too long message from Serial Device. at SerialResponseTransport.handleSerialTimeout (/opt/iobroker/node_modules/smartmeter-obis/lib/transports/SerialResponseTransport.js:200:11) a
smartmeter.0	2017-08-12 09:22:56.365	error	uncaught exception: No or too long message from Serial Device.
smartmeter.0	2017-08-12 09:22:56.364	debug	MESSAGE TIMEOUT TRIGGERED
smartmeter.0	2017-08-12 07:20:56.315	debug	REMAINING DATA AFTER MESSAGE HANDLING:
smartmeter.0	2017-08-12 07:20:56.314	debug	CURRENT PROCESS STEP 3 IN ISPROCESSCOMPLETE: false
smartmeter.0	2017-08-12 07:20:56.313	debug	SET MESSAGE TIMEOUT TIMER: 120000
smartmeter.0	2017-08-12 07:20:56.310	debug	SerialResponseTransport do not support sending of Data! Ignore them
smartmeter.0	2017-08-12 07:20:56.308	debug	CURRENT PROCESS STEP 3 IN ISPROCESSCOMPLETE: false
smartmeter.0	2017-08-12 07:20:56.303	debug	CURRENT PROCESS STEP 2 IN HANDLEMESSAGE
smartmeter.0	2017-08-12 07:20:56.300	debug	PAUSE READING SERIALPORT TO HANDLE MESSAGE
smartmeter.0	2017-08-12 07:20:56.299	debug	MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3.03\r\n" -> ["/ESY5Q3DA2004 V3.03\r\n","/ESY5Q3DA2004 V3.03"]
smartmeter.0	2017-08-12 07:20:56.298	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-12 07:20:56.297	debug	MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3.03" -> null
smartmeter.0	2017-08-12 07:20:56.296	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-12 07:20:56.295	debug	MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3." -> null
smartmeter.0	2017-08-12 07:20:56.294	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-12 07:20:56.293	debug	MATCH-RESULT SIGNON: "/ESY5Q3DA2004 " -> null
smartmeter.0	2017-08-12 07:20:56.292	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-12 07:20:56.290	debug	MATCH-RESULT SIGNON: "/ESY" -> null
smartmeter.0	2017-08-12 07:20:56.288	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-12 07:20:55.518	debug	SET MESSAGE TIMEOUT TIMER: 120000
smartmeter.0	2017-08-12 07:20:55.511	debug	SERIALPORT OPEN
smartmeter.0	2017-08-12 07:20:55.491	debug	CREATE SERIALPORT: 9600 7 1 even
smartmeter.0	2017-08-12 07:20:55.484	debug	SmartmeterObis options: {"debug":2,"protocol":"D0Protocol","transport":"SerialResponseTransport","requestInterval":"10","transportSerialPort":"/dev/ttyUSB0","transportSerialBaudrate":9600,"transportS
smartmeter.0	2017-08-12 07:20:55.473	info	starting. Version 0.5.12 in /opt/iobroker/node_modules/iobroker.smartmeter, node: v6.11.2

Benutzeravatar
apollon77
guru
Beiträge: 4739
Registriert: 10.04.2015, 12:27

Re: Neuer Adapter "smartmeter"

Beitrag von apollon77 » 12.08.2017, 18:01

Ok, die Identifikation wird empfangen und danach nichts mehr. Es kann sein das er ein "ack" erwartet ... würde aber gegen das sprechen was du oben als Beispiel hattest wo er es von sich aus gesendet hat ... die overrides kannst du mal durchprobieren falls du es nicht schon hast. Sonst schau ich gern nach dem 20.8. rein, da bin ich zurück aus dem Urlaub ;-)

Benutzeravatar
apollon77
guru
Beiträge: 4739
Registriert: 10.04.2015, 12:27

Re: Neuer Adapter "smartmeter"

Beitrag von apollon77 » 12.08.2017, 18:11

Ps: mode override geht aber nur wenn Transport auf bidirektional senden und empfangen steht!

church
starter
Beiträge: 68
Registriert: 11.08.2017, 09:14

Re: Neuer Adapter "smartmeter"

Beitrag von church » 13.08.2017, 09:36

Ich habe dann mal auf bidirektional umgestellt und erhalte dann folgenden log (bei allen overwrite modes):
Spoiler: Show hidden text
2017-08-13 10:49:18.088 - [32minfo[39m: smartmeter.0 starting. Version 0.5.12 in /opt/iobroker/node_modules/iobroker.smartmeter, node: v6.11.2
2017-08-13 10:49:18.099 - [34mdebug[39m: smartmeter.0 SmartmeterObis options: {"debug":2,"protocol":"D0Protocol","transport":"SerialRequestResponseTransport","requestInterval":"10","transportSerialPort":"/dev/ttyUSB0","transportSerialBaudrate":9600,"transportSerialDataBits":7,"transportSerialStopBits":1,"transportSerialParity":"even","transportSerialMessageTimeout":null,"protocolD0WakeupCharacters":null,"protocolD0ModeOverwrite":"E","obisFallbackMedium":1}
2017-08-13 10:49:18.108 - [34mdebug[39m: smartmeter.0 CREATE SERIALPORT: 9600 7 1 even
2017-08-13 10:49:18.129 - [34mdebug[39m: smartmeter.0 SERIALPORT OPEN
2017-08-13 10:49:18.136 - [34mdebug[39m: smartmeter.0 SERIALPORT RESET BAUDRATE TO 9600
2017-08-13 10:49:18.141 - [34mdebug[39m: smartmeter.0 INITIAL MESSAGES TO SEND: 2
2017-08-13 10:49:18.145 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 0 IN GETNEXTMESSAGE
2017-08-13 10:49:18.146 - [34mdebug[39m: smartmeter.0 TO SEND 2:
2017-08-13 10:49:18.147 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 1 IN GETNEXTMESSAGE
2017-08-13 10:49:18.148 - [34mdebug[39m: smartmeter.0 TO SEND 1: /?!

2017-08-13 10:49:18.170 - [34mdebug[39m: smartmeter.0 DONE SEND 1
2017-08-13 10:49:18.422 - [34mdebug[39m: smartmeter.0 DONE SEND 0
2017-08-13 10:49:18.424 - [34mdebug[39m: smartmeter.0 SET MESSAGE TIMEOUT TIMER: 120000
2017-08-13 10:49:18.744 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 2 IN CHECKMESSAGE
2017-08-13 10:49:18.746 - [34mdebug[39m: smartmeter.0 MATCH-RESULT SIGNON: "/ESY5" -> null
2017-08-13 10:49:18.748 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 2 IN CHECKMESSAGE
2017-08-13 10:49:18.749 - [34mdebug[39m: smartmeter.0 MATCH-RESULT SIGNON: "/ESY5Q3DA2004" -> null
2017-08-13 10:49:18.750 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 2 IN CHECKMESSAGE
2017-08-13 10:49:18.751 - [34mdebug[39m: smartmeter.0 MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3" -> null
2017-08-13 10:49:18.752 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 2 IN CHECKMESSAGE
2017-08-13 10:49:18.752 - [34mdebug[39m: smartmeter.0 MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3." -> null
2017-08-13 10:49:18.755 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 2 IN CHECKMESSAGE
2017-08-13 10:49:18.756 - [34mdebug[39m: smartmeter.0 MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3.03\r" -> null
2017-08-13 10:49:18.757 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 2 IN CHECKMESSAGE
2017-08-13 10:49:18.760 - [34mdebug[39m: smartmeter.0 MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3.03\r\n\r" -> ["/ESY5Q3DA2004 V3.03\r\n","/ESY5Q3DA2004 V3.03"]
2017-08-13 10:49:18.763 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 2 IN HANDLEMESSAGE
2017-08-13 10:49:18.767 - [34mdebug[39m: smartmeter.0 OVERWRITE D0-MODE C WITH E
2017-08-13 10:49:18.772 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 3 IN ISPROCESSCOMPLETE: false
2017-08-13 10:49:18.773 - [34mdebug[39m: smartmeter.0 MESSAGES TO SEND: 2
2017-08-13 10:49:19.030 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 3 IN GETNEXTMESSAGE
2017-08-13 10:49:19.032 - [34mdebug[39m: smartmeter.0 TO SEND 2: 050

2017-08-13 10:49:19.050 - [34mdebug[39m: smartmeter.0 DONE SEND 2
2017-08-13 10:49:19.301 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN GETNEXTMESSAGE
2017-08-13 10:49:19.302 - [34mdebug[39m: smartmeter.0 TO SEND 1:
2017-08-13 10:49:19.302 - [34mdebug[39m: smartmeter.0 DONE SEND 0
2017-08-13 10:49:19.304 - [34mdebug[39m: smartmeter.0 SET MESSAGE TIMEOUT TIMER: 120000
2017-08-13 10:49:19.304 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN ISPROCESSCOMPLETE: false
2017-08-13 10:49:19.306 - [34mdebug[39m: smartmeter.0 REMAINING DATA AFTER MESSAGE HANDLING:
2017-08-13 10:49:20.736 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.738 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/E" -> null
2017-08-13 10:49:20.741 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.742 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5" -> null
2017-08-13 10:49:20.742 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.743 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q" -> null
2017-08-13 10:49:20.744 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.744 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3D" -> null
2017-08-13 10:49:20.745 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.745 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA" -> null
2017-08-13 10:49:20.746 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.747 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2" -> null
2017-08-13 10:49:20.748 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.748 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA20" -> null
2017-08-13 10:49:20.749 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.750 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004" -> null
2017-08-13 10:49:20.751 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.751 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 " -> null
2017-08-13 10:49:20.752 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.753 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3" -> null
2017-08-13 10:49:20.754 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.754 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3." -> null
2017-08-13 10:49:20.755 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.756 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.0" -> null
2017-08-13 10:49:20.758 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.759 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03" -> null
2017-08-13 10:49:20.760 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.761 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n" -> null
2017-08-13 10:49:20.762 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.763 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-" -> null
2017-08-13 10:49:20.763 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.764 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0" -> null
2017-08-13 10:49:20.765 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.765 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0" -> null
2017-08-13 10:49:20.766 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.767 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0." -> null
2017-08-13 10:49:20.768 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.769 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0" -> null
2017-08-13 10:49:20.771 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.772 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*" -> null
2017-08-13 10:49:20.774 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.774 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*25" -> null
2017-08-13 10:49:20.776 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.777 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(1" -> null
2017-08-13 10:49:20.778 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.779 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXX" -> null
2017-08-13 10:49:20.779 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.780 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXX" -> null
2017-08-13 10:49:20.781 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.781 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX" -> null
2017-08-13 10:49:20.782 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.783 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r" -> null
2017-08-13 10:49:20.784 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.784 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n" -> null
2017-08-13 10:49:20.786 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.791 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1" -> null
2017-08-13 10:49:20.793 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.794 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8." -> null
2017-08-13 10:49:20.796 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.796 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*2" -> null
2017-08-13 10:49:20.797 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.798 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255" -> null
2017-08-13 10:49:20.799 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.799 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(0" -> null
2017-08-13 10:49:20.800 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.801 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00" -> null
2017-08-13 10:49:20.802 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.805 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(0009" -> null
2017-08-13 10:49:20.806 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.807 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(0009032" -> null
2017-08-13 10:49:20.808 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.811 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324." -> null
2017-08-13 10:49:20.813 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.813 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.38787" -> null
2017-08-13 10:49:20.814 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.815 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743" -> null
2017-08-13 10:49:20.815 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.816 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*" -> null
2017-08-13 10:49:20.817 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.817 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*k" -> null
2017-08-13 10:49:20.818 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.819 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kW" -> null
2017-08-13 10:49:20.820 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.820 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)" -> null
2017-08-13 10:49:20.821 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.822 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r" -> null
2017-08-13 10:49:20.827 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.828 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:2" -> null
2017-08-13 10:49:20.832 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.833 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7" -> null
2017-08-13 10:49:20.835 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.838 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.25" -> null
2017-08-13 10:49:20.848 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.850 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261." -> null
2017-08-13 10:49:20.853 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.853 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*" -> null
2017-08-13 10:49:20.854 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.854 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r" -> null
2017-08-13 10:49:20.855 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.856 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n" -> null
2017-08-13 10:49:20.859 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.860 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0" -> null
2017-08-13 10:49:20.861 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.862 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41" -> null
2017-08-13 10:49:20.862 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.863 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41." -> null
2017-08-13 10:49:20.863 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.863 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7" -> null
2017-08-13 10:49:20.864 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.864 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7." -> null
2017-08-13 10:49:20.956 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.957 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:" -> null
2017-08-13 10:49:20.958 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.958 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96." -> null
2017-08-13 10:49:20.959 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.960 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5" -> null
2017-08-13 10:49:20.961 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.962 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*" -> null
2017-08-13 10:49:20.963 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.964 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*2" -> null
2017-08-13 10:49:20.965 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.966 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*25" -> null
2017-08-13 10:49:20.967 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.968 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*255(8" -> null
2017-08-13 10:49:20.969 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.970 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*255(82" -> null
2017-08-13 10:49:20.971 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.972 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*255(82)\r\n" -> null
2017-08-13 10:49:20.973 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.974 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*255(82)\r\n0" -> null
2017-08-13 10:49:20.975 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.976 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*255(82)\r\n0-0" -> null
2017-08-13 10:49:20.977 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.978 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*255(82)\r\n0-0:9" -> null
2017-08-13 10:49:20.979 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.979 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*255(82)\r\n0-0:96." -> null
2017-08-13 10:49:20.980 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.981 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*255(82)\r\n0-0:96.1" -> null
2017-08-13 10:49:20.982 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.983 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*255(82)\r\n0-0:96.1.25" -> null
2017-08-13 10:49:20.984 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.985 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*255(82)\r\n0-0:96.1.255" -> null
2017-08-13 10:49:20.986 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.987 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*255(82)\r\n0-0:96.1.255*" -> null
2017-08-13 10:49:20.988 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.988 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*255(82)\r\n0-0:96.1.255*25" -> null
2017-08-13 10:49:20.989 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.990 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*255(82)\r\n0-0:96.1.255*255(" -> null
2017-08-13 10:49:20.991 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.992 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*255(82)\r\n0-0:96.1.255*255(1E" -> null
2017-08-13 10:49:20.993 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.994 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*255(82)\r\n0-0:96.1.255*255(1ES" -> null
2017-08-13 10:49:20.995 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.995 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*255(82)\r\n0-0:96.1.255*255(1ESY1" -> null
2017-08-13 10:49:20.996 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.997 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*255(82)\r\n0-0:96.1.255*255(1ESY113" -> null
2017-08-13 10:49:20.998 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:20.999 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*255(82)\r\n0-0:96.1.255*255(1ESY113X" -> null
2017-08-13 10:49:21.000 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:21.001 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*255(82)\r\n0-0:96.1.255*255(1ESY113XXX" -> null
2017-08-13 10:49:21.002 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:21.003 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*255(82)\r\n0-0:96.1.255*255(1ESY113XXXXXX" -> null
2017-08-13 10:49:21.004 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:21.008 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*255(82)\r\n0-0:96.1.255*255(1ESY113XXXXXXX" -> null
2017-08-13 10:49:21.009 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:21.010 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*255(82)\r\n0-0:96.1.255*255(1ESY113XXXXXXX)\r\n!\r" -> null
2017-08-13 10:49:21.011 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
2017-08-13 10:49:21.012 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*255(82)\r\n0-0:96.1.255*255(1ESY113XXXXXXX)\r\n!\r\n" -> ["ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*255(82)\r\n0-0:96.1.255*255(1ESY113XXXXXXX)\r\n!\r\n","ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*255(XXXXXX)\r\n1-0:1.8.0*255(00090324.3878743*kWh)\r\n1-0:21.7.255*255(000261.00*W)\r\n1-0:41.7.255*255(000151.31*W)\r\n1-0:61.7.255*255(000043.67*W)\r\n1-0:1.7.255*255(000455.98*W)\r\n1-0:96.5.5*255(82)\r\n0-0:96.1.255*255(1ESY113XXXXXXX)\r\n"]
2017-08-13 10:49:21.018 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN HANDLEMESSAGE
2017-08-13 10:49:21.052 - [31merror[39m: smartmeter.0 uncaught exception: Invalid Obis String ESY5Q3DA2004 V3.03

1-0:0.0.0*255
2017-08-13 10:49:21.052 - [31merror[39m: smartmeter.0 Error: Invalid Obis String ESY5Q3DA2004 V3.03

1-0:0.0.0*255
at new ObisMeasurement (/opt/iobroker/node_modules/smartmeter-obis/lib/ObisMeasurement.js:46:23)
at D0Protocol.prepareResult (/opt/iobroker/node_modules/smartmeter-obis/lib/protocols/D0Protocol.js:199:31)
at D0Protocol.handleMessage (/opt/iobroker/node_modules/smartmeter-obis/lib/protocols/D0Protocol.js:158:27)
at SerialPort.<anonymous> (/opt/iobroker/node_modules/smartmeter-obis/lib/transports/SerialRequestResponseTransport.js:60:41)
at emitOne (events.js:96:13)
at SerialPort.emit (events.js:188:7)
at SerialPort.raw (/opt/iobroker/node_modules/serialport/lib/parsers.js:7:13)
at SerialPort._emitData (/opt/iobroker/node_modules/serialport/lib/serialport.js:313:18)
at SerialPort.<anonymous> (/opt/iobroker/node_modules/serialport/lib/serialport.js:293:14)
at SerialPort.<anonymous> (/opt/iobroker/node_modules/serialport/lib/serialport.js:306:7)
2017-08-13 10:49:21.056 - [33mwarn[39m: smartmeter.0 Exception: Error: Invalid Obis String ESY5Q3DA2004 V3.03

1-0:0.0.0*255
2017-08-13 10:49:21.061 - [34mdebug[39m: smartmeter.0 SERIALPORT CLOSE
2017-08-13 10:49:21.563 - [32minfo[39m: smartmeter.0 terminating
2017-08-13 08:49:21.588 - [31merror[39m: host.raspberrypi instance system.adapter.smartmeter.0 terminated with code 0 (OK)
2017-08-13 08:49:21.589 - [32minfo[39m: host.raspberrypi Restart adapter system.adapter.smartmeter.0 because enabled
Wünsche noch schönen Urlaub !!

Benutzeravatar
apollon77
guru
Beiträge: 4739
Registriert: 10.04.2015, 12:27

Re: Neuer Adapter "smartmeter"

Beitrag von apollon77 » 13.08.2017, 16:05

Komisch komisch ... mach mal wieder auf serial nur lesen und den override raus. Ich kapiere es gerade nicht. Versuch bitte mal Version 5.10 oder 5.11 (im Admin Expertenmodus unter Adapter dann ganz rechts ist ein Dropdown-Menü für ältere versionen. Will nur sicher gehen das es nicht an der 0.5.12 liegt ...

church
starter
Beiträge: 68
Registriert: 11.08.2017, 09:14

Re: Neuer Adapter "smartmeter"

Beitrag von church » 14.08.2017, 16:03

Bei den "downgrades" bekomme ich folgende Fehlermeldungen:

Code: Alles auswählen

iobroker	2017-08-14 17:00:27.100	info	exit 0
iobroker	2017-08-14 17:00:27.085	info	Adapter "smartmeter" updated
iobroker	2017-08-14 17:00:27.022	info	upload [0] smartmeter.admin /opt/iobroker/node_modules/iobroker.smartmeter/admin/index.html index.html text/html
iobroker	2017-08-14 17:00:26.960	info	upload [1] smartmeter.admin /opt/iobroker/node_modules/iobroker.smartmeter/admin/questionmark.png questionmark.png image/png
iobroker	2017-08-14 17:00:26.804	info	upload [2] smartmeter.admin /opt/iobroker/node_modules/iobroker.smartmeter/admin/smartmeter.jpg smartmeter.jpg image/jpeg
iobroker	2017-08-14 17:00:26.727	info	upload [3] smartmeter.admin /opt/iobroker/node_modules/iobroker.smartmeter/admin/smartmeter.png smartmeter.png image/png
iobroker	2017-08-14 17:00:26.636	info	upload [4] smartmeter.admin /opt/iobroker/node_modules/iobroker.smartmeter/admin/tooltip.css tooltip.css text/css
iobroker	2017-08-14 17:00:26.603	info	got /opt/iobroker/node_modules/iobroker.smartmeter/admin
iobroker	2017-08-14 17:00:19.439	info	npm install --production (System call) in "/opt/iobroker/node_modules/iobroker.smartmeter"
iobroker	2017-08-14 17:00:19.404	info	npm ERR! /opt/npm-debug.log
iobroker	2017-08-14 17:00:19.404	info	npm ERR! Please include the following file with any support request:
iobroker	2017-08-14 17:00:19.404	info	npm ERR! notarget a package version that doesn't exist.
iobroker	2017-08-14 17:00:19.404	info	npm ERR! notarget In most cases you or one of your dependencies are requesting
iobroker	2017-08-14 17:00:19.404	info	npm ERR! notarget This is most likely not a problem with npm itself.
iobroker	2017-08-14 17:00:19.404	info	npm ERR! notarget
iobroker	2017-08-14 17:00:19.404	info	npm ERR! notarget 0.5.12, 0.5.8, 0.5.7, 0.5.6, 0.5.5, 0.5.4, 0.5.0, 0.4.1, 0.4.0, 0.3.3, 0.3.2, 0.3.1, 0.3.0, 0.2.6, 0.2.4, 0.2.0, 0.1.1, 0.1.0
iobroker	2017-08-14 17:00:19.404	info	npm ERR! notarget Valid install targets:
iobroker	2017-08-14 17:00:19.404	info	npm ERR! notarget No compatible version found: iobroker.smartmeter@0.5.11
iobroker	2017-08-14 17:00:19.404	info	npm ERR! code ETARGET
iobroker	2017-08-14 17:00:19.398	info	npm ERR! npm v3.10.10
iobroker	2017-08-14 17:00:19.398	info	npm ERR! node v6.11.2
iobroker	2017-08-14 17:00:19.398	info	npm ERR! Linux 4.9.35-v7+npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "install" "iobroker.smartmeter@0.5.11" "--production" "--prefix" "/opt/iobroker"
iobroker	2017-08-14 17:00:07.577	info	npm install iobroker.smartmeter@0.5.11 --production --prefix "/opt/iobroker" (System call)
iobroker	2017-08-14 17:00:05.362	info	upgrade smartmeter@0.5.11

Benutzeravatar
apollon77
guru
Beiträge: 4739
Registriert: 10.04.2015, 12:27

Re: Neuer Adapter "smartmeter"

Beitrag von apollon77 » 14.08.2017, 20:06

Ok dann nimm die 0.5.8 ;-) das André waren github Zwischenversionen ...

church
starter
Beiträge: 68
Registriert: 11.08.2017, 09:14

Re: Neuer Adapter "smartmeter"

Beitrag von church » 15.08.2017, 13:25

Bis 0.5.9 runter hatte ich probiert 8-)

Downgrade auf 0.5.8 hat dann funktioniert und es werden jetzt erstmalig die Datenpunkte angelegt:
Bildschirmfoto 2017-08-15 um 14.35.02.jpg
Leider bleibt es bei dem einmaligen Einlesen, im log kommt dann wieder der Fehler:

Code: Alles auswählen

smartmeter.0	2017-08-15 14:33:54.508	debug	SERIALPORT CLOSE
smartmeter.0	2017-08-15 14:33:54.508	warn	Exception: Error: No or too long message from Serial Device.
smartmeter.0	2017-08-15 14:33:54.508	error	Error: No or too long message from Serial Device. at SerialResponseTransport.handleSerialTimeout (/opt/iobroker/node_modules/iobroker.smartmeter/node_modules/smartmeter-obis/lib/transports/SerialR
smartmeter.0	2017-08-15 14:33:54.507	error	uncaught exception: No or too long message from Serial Device.
smartmeter.0	2017-08-15 14:33:54.506	debug	MESSAGE TIMEOUT TRIGGERED
smartmeter.0	2017-08-15 14:33:44.454	debug	REMAINING DATA AFTER MESSAGE HANDLING:
smartmeter.0	2017-08-15 14:33:44.453	debug	CURRENT PROCESS STEP 3 IN ISPROCESSCOMPLETE: false
smartmeter.0	2017-08-15 14:33:44.453	debug	SET MESSAGE TIMEOUT TIMER: 10000
smartmeter.0	2017-08-15 14:33:44.453	debug	SerialResponseTransport do not support sending of Data! Ignore them
smartmeter.0	2017-08-15 14:33:44.453	debug	CURRENT PROCESS STEP 3 IN ISPROCESSCOMPLETE: false
smartmeter.0	2017-08-15 14:33:44.452	debug	CURRENT PROCESS STEP 2 IN HANDLEMESSAGE
smartmeter.0	2017-08-15 14:33:44.452	debug	PAUSE READING SERIALPORT TO HANDLE MESSAGE
smartmeter.0	2017-08-15 14:33:44.451	debug	MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3.03\r\n" -> ["/ESY5Q3DA2004 V3.03\r\n","/ESY5Q3DA2004 V3.03"]
smartmeter.0	2017-08-15 14:33:44.451	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-15 14:33:44.449	debug	MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3.03" -> null
smartmeter.0	2017-08-15 14:33:44.449	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-15 14:33:44.449	debug	MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3.0" -> null
smartmeter.0	2017-08-15 14:33:44.449	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-15 14:33:44.448	debug	MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3" -> null
smartmeter.0	2017-08-15 14:33:44.448	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-15 14:33:44.448	debug	MATCH-RESULT SIGNON: "/ESY5Q3DA2004" -> null
smartmeter.0	2017-08-15 14:33:44.447	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-15 14:33:44.447	debug	MATCH-RESULT SIGNON: "/ESY5" -> null
smartmeter.0	2017-08-15 14:33:44.445	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-15 14:33:43.558	debug	SET MESSAGE TIMEOUT TIMER: 10000
smartmeter.0	2017-08-15 14:33:43.557	debug	SERIALPORT OPEN
smartmeter.0	2017-08-15 14:33:43.557	debug	CREATE SERIALPORT: 9600 7 1 even
smartmeter.0	2017-08-15 14:33:43.556	debug	SmartmeterObis options: {"debug":2,"protocol":"D0Protocol","transport":"SerialResponseTransport","requestInterval":"10","transportSerialPort":"/dev/ttyUSB0","transportSerialBaudrate":9600,"transportSe
smartmeter.0	2017-08-15 14:33:43.555	info	starting. Version 0.5.8 in /opt/iobroker/node_modules/iobroker.smartmeter, node: v6.11.2
host.raspberrypi	2017-08-15 14:33:41.007	info	
Kann das ggfs. an der Leerzeile nach der ersten Zeile (/ESY5Q3DA2004 V3.03) der D0-Message liegen?

Benutzeravatar
apollon77
guru
Beiträge: 4739
Registriert: 10.04.2015, 12:27

Re: Neuer Adapter "smartmeter"

Beitrag von apollon77 » 15.08.2017, 19:07

Die Leerzeile ist korrekt. Auf welchem Betriebssystem läuft das denn bei dir? Linux Mac oder Windows? Wenn du den Adapter stops und dann neu startest geht es dann wieder ein mal?

Benutzeravatar
apollon77
guru
Beiträge: 4739
Registriert: 10.04.2015, 12:27

Re: Neuer Adapter "smartmeter"

Beitrag von apollon77 » 15.08.2017, 19:08

Und hast du das log von dem einen mal wo es geklappt hat?

Antworten